linux-stable/drivers/video/fbdev/broadsheetfb.c

1227 lines
28 KiB
C
Raw Normal View History

/*
* broadsheetfb.c -- FB driver for E-Ink Broadsheet controller
*
* Copyright (C) 2008, Jaya Kumar
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
* Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
*
* This driver is written to be used with the Broadsheet display controller.
*
* It is intended to be architecture independent. A board specific driver
* must be used to perform all the physical IO interactions.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/list.h>
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
#include <linux/firmware.h>
#include <linux/uaccess.h>
#include <video/broadsheetfb.h>
/* track panel specific parameters */
struct panel_info {
int w;
int h;
u16 sdcfg;
u16 gdcfg;
u16 lutfmt;
u16 fsynclen;
u16 fendfbegin;
u16 lsynclen;
u16 lendlbegin;
u16 pixclk;
};
/* table of panel specific parameters to be indexed into by the board drivers */
static struct panel_info panel_table[] = {
{ /* standard 6" on TFT backplane */
.w = 800,
.h = 600,
.sdcfg = (100 | (1 << 8) | (1 << 9)),
.gdcfg = 2,
.lutfmt = (4 | (1 << 7)),
.fsynclen = 4,
.fendfbegin = (10 << 8) | 4,
.lsynclen = 10,
.lendlbegin = (100 << 8) | 4,
.pixclk = 6,
},
{ /* custom 3.7" flexible on PET or steel */
.w = 320,
.h = 240,
.sdcfg = (67 | (0 << 8) | (0 << 9) | (0 << 10) | (0 << 12)),
.gdcfg = 3,
.lutfmt = (4 | (1 << 7)),
.fsynclen = 0,
.fendfbegin = (80 << 8) | 4,
.lsynclen = 10,
.lendlbegin = (80 << 8) | 20,
.pixclk = 14,
},
{ /* standard 9.7" on TFT backplane */
.w = 1200,
.h = 825,
.sdcfg = (100 | (1 << 8) | (1 << 9) | (0 << 10) | (0 << 12)),
.gdcfg = 2,
.lutfmt = (4 | (1 << 7)),
.fsynclen = 0,
.fendfbegin = (4 << 8) | 4,
.lsynclen = 4,
.lendlbegin = (60 << 8) | 10,
.pixclk = 3,
},
};
#define DPY_W 800
#define DPY_H 600
static struct fb_fix_screeninfo broadsheetfb_fix = {
.id = "broadsheetfb",
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_STATIC_PSEUDOCOLOR,
.xpanstep = 0,
.ypanstep = 0,
.ywrapstep = 0,
.line_length = DPY_W,
.accel = FB_ACCEL_NONE,
};
static struct fb_var_screeninfo broadsheetfb_var = {
.xres = DPY_W,
.yres = DPY_H,
.xres_virtual = DPY_W,
.yres_virtual = DPY_H,
.bits_per_pixel = 8,
.grayscale = 1,
.red = { 0, 4, 0 },
.green = { 0, 4, 0 },
.blue = { 0, 4, 0 },
.transp = { 0, 0, 0 },
};
/* main broadsheetfb functions */
static void broadsheet_gpio_issue_data(struct broadsheetfb_par *par, u16 data)
{
par->board->set_ctl(par, BS_WR, 0);
par->board->set_hdb(par, data);
par->board->set_ctl(par, BS_WR, 1);
}
static void broadsheet_gpio_issue_cmd(struct broadsheetfb_par *par, u16 data)
{
par->board->set_ctl(par, BS_DC, 0);
broadsheet_gpio_issue_data(par, data);
}
static void broadsheet_gpio_send_command(struct broadsheetfb_par *par, u16 data)
{
par->board->wait_for_rdy(par);
par->board->set_ctl(par, BS_CS, 0);
broadsheet_gpio_issue_cmd(par, data);
par->board->set_ctl(par, BS_DC, 1);
par->board->set_ctl(par, BS_CS, 1);
}
static void broadsheet_gpio_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
int argc, u16 *argv)
{
int i;
par->board->wait_for_rdy(par);
par->board->set_ctl(par, BS_CS, 0);
broadsheet_gpio_issue_cmd(par, cmd);
par->board->set_ctl(par, BS_DC, 1);
for (i = 0; i < argc; i++)
broadsheet_gpio_issue_data(par, argv[i]);
par->board->set_ctl(par, BS_CS, 1);
}
static void broadsheet_mmio_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
int argc, u16 *argv)
{
int i;
par->board->mmio_write(par, BS_MMIO_CMD, cmd);
for (i = 0; i < argc; i++)
par->board->mmio_write(par, BS_MMIO_DATA, argv[i]);
}
static void broadsheet_send_command(struct broadsheetfb_par *par, u16 data)
{
if (par->board->mmio_write)
par->board->mmio_write(par, BS_MMIO_CMD, data);
else
broadsheet_gpio_send_command(par, data);
}
static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
int argc, u16 *argv)
{
if (par->board->mmio_write)
broadsheet_mmio_send_cmdargs(par, cmd, argc, argv);
else
broadsheet_gpio_send_cmdargs(par, cmd, argc, argv);
}
static void broadsheet_gpio_burst_write(struct broadsheetfb_par *par, int size,
u16 *data)
{
int i;
u16 tmp;
par->board->set_ctl(par, BS_CS, 0);
par->board->set_ctl(par, BS_DC, 1);
for (i = 0; i < size; i++) {
par->board->set_ctl(par, BS_WR, 0);
tmp = (data[i] & 0x0F) << 4;
tmp |= (data[i] & 0x0F00) << 4;
par->board->set_hdb(par, tmp);
par->board->set_ctl(par, BS_WR, 1);
}
par->board->set_ctl(par, BS_CS, 1);
}
static void broadsheet_mmio_burst_write(struct broadsheetfb_par *par, int size,
u16 *data)
{
int i;
u16 tmp;
for (i = 0; i < size; i++) {
tmp = (data[i] & 0x0F) << 4;
tmp |= (data[i] & 0x0F00) << 4;
par->board->mmio_write(par, BS_MMIO_DATA, tmp);
}
}
static void broadsheet_burst_write(struct broadsheetfb_par *par, int size,
u16 *data)
{
if (par->board->mmio_write)
broadsheet_mmio_burst_write(par, size, data);
else
broadsheet_gpio_burst_write(par, size, data);
}
static u16 broadsheet_gpio_get_data(struct broadsheetfb_par *par)
{
u16 res;
/* wait for ready to go hi. (lo is busy) */
par->board->wait_for_rdy(par);
/* cs lo, dc lo for cmd, we lo for each data, db as usual */
par->board->set_ctl(par, BS_DC, 1);
par->board->set_ctl(par, BS_CS, 0);
par->board->set_ctl(par, BS_WR, 0);
res = par->board->get_hdb(par);
/* strobe wr */
par->board->set_ctl(par, BS_WR, 1);
par->board->set_ctl(par, BS_CS, 1);
return res;
}
static u16 broadsheet_get_data(struct broadsheetfb_par *par)
{
if (par->board->mmio_read)
return par->board->mmio_read(par);
else
return broadsheet_gpio_get_data(par);
}
static void broadsheet_gpio_write_reg(struct broadsheetfb_par *par, u16 reg,
u16 data)
{
/* wait for ready to go hi. (lo is busy) */
par->board->wait_for_rdy(par);
/* cs lo, dc lo for cmd, we lo for each data, db as usual */
par->board->set_ctl(par, BS_CS, 0);
broadsheet_gpio_issue_cmd(par, BS_CMD_WR_REG);
par->board->set_ctl(par, BS_DC, 1);
broadsheet_gpio_issue_data(par, reg);
broadsheet_gpio_issue_data(par, data);
par->board->set_ctl(par, BS_CS, 1);
}
static void broadsheet_mmio_write_reg(struct broadsheetfb_par *par, u16 reg,
u16 data)
{
par->board->mmio_write(par, BS_MMIO_CMD, BS_CMD_WR_REG);
par->board->mmio_write(par, BS_MMIO_DATA, reg);
par->board->mmio_write(par, BS_MMIO_DATA, data);
}
static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg,
u16 data)
{
if (par->board->mmio_write)
broadsheet_mmio_write_reg(par, reg, data);
else
broadsheet_gpio_write_reg(par, reg, data);
}
static void broadsheet_write_reg32(struct broadsheetfb_par *par, u16 reg,
u32 data)
{
broadsheet_write_reg(par, reg, cpu_to_le32(data) & 0xFFFF);
broadsheet_write_reg(par, reg + 2, (cpu_to_le32(data) >> 16) & 0xFFFF);
}
static u16 broadsheet_read_reg(struct broadsheetfb_par *par, u16 reg)
{
broadsheet_send_cmdargs(par, BS_CMD_RD_REG, 1, &reg);
par->board->wait_for_rdy(par);
return broadsheet_get_data(par);
}
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
/* functions for waveform manipulation */
static int is_broadsheet_pll_locked(struct broadsheetfb_par *par)
{
return broadsheet_read_reg(par, 0x000A) & 0x0001;
}
static int broadsheet_setup_plls(struct broadsheetfb_par *par)
{
int retry_count = 0;
u16 tmp;
/* disable arral saemipu mode */
broadsheet_write_reg(par, 0x0006, 0x0000);
broadsheet_write_reg(par, 0x0010, 0x0004);
broadsheet_write_reg(par, 0x0012, 0x5949);
broadsheet_write_reg(par, 0x0014, 0x0040);
broadsheet_write_reg(par, 0x0016, 0x0000);
do {
if (retry_count++ > 100)
return -ETIMEDOUT;
mdelay(1);
} while (!is_broadsheet_pll_locked(par));
tmp = broadsheet_read_reg(par, 0x0006);
tmp &= ~0x1;
broadsheet_write_reg(par, 0x0006, tmp);
return 0;
}
static int broadsheet_setup_spi(struct broadsheetfb_par *par)
{
broadsheet_write_reg(par, 0x0204, ((3 << 3) | 1));
broadsheet_write_reg(par, 0x0208, 0x0001);
return 0;
}
static int broadsheet_setup_spiflash(struct broadsheetfb_par *par,
u16 *orig_sfmcd)
{
*orig_sfmcd = broadsheet_read_reg(par, 0x0204);
broadsheet_write_reg(par, 0x0208, 0);
broadsheet_write_reg(par, 0x0204, 0);
broadsheet_write_reg(par, 0x0204, ((3 << 3) | 1));
return 0;
}
static int broadsheet_spiflash_wait_for_bit(struct broadsheetfb_par *par,
u16 reg, int bitnum, int val,
int timeout)
{
u16 tmp;
do {
tmp = broadsheet_read_reg(par, reg);
if (((tmp >> bitnum) & 1) == val)
return 0;
mdelay(1);
} while (timeout--);
return -ETIMEDOUT;
}
static int broadsheet_spiflash_write_byte(struct broadsheetfb_par *par, u8 data)
{
broadsheet_write_reg(par, 0x0202, (data | 0x100));
return broadsheet_spiflash_wait_for_bit(par, 0x0206, 3, 0, 100);
}
static int broadsheet_spiflash_read_byte(struct broadsheetfb_par *par, u8 *data)
{
int err;
u16 tmp;
broadsheet_write_reg(par, 0x0202, 0);
err = broadsheet_spiflash_wait_for_bit(par, 0x0206, 3, 0, 100);
if (err)
return err;
tmp = broadsheet_read_reg(par, 0x200);
*data = tmp & 0xFF;
return 0;
}
static int broadsheet_spiflash_wait_for_status(struct broadsheetfb_par *par,
int timeout)
{
u8 tmp;
int err;
do {
broadsheet_write_reg(par, 0x0208, 1);
err = broadsheet_spiflash_write_byte(par, 0x05);
if (err)
goto failout;
err = broadsheet_spiflash_read_byte(par, &tmp);
if (err)
goto failout;
broadsheet_write_reg(par, 0x0208, 0);
if (!(tmp & 0x1))
return 0;
mdelay(5);
} while (timeout--);
dev_err(par->info->device, "Timed out waiting for spiflash status\n");
return -ETIMEDOUT;
failout:
broadsheet_write_reg(par, 0x0208, 0);
return err;
}
static int broadsheet_spiflash_op_on_address(struct broadsheetfb_par *par,
u8 op, u32 addr)
{
int i;
u8 tmp;
int err;
broadsheet_write_reg(par, 0x0208, 1);
err = broadsheet_spiflash_write_byte(par, op);
if (err)
return err;
for (i = 2; i >= 0; i--) {
tmp = ((addr >> (i * 8)) & 0xFF);
err = broadsheet_spiflash_write_byte(par, tmp);
if (err)
return err;
}
return err;
}
static int broadsheet_verify_spiflash(struct broadsheetfb_par *par,
int *flash_type)
{
int err = 0;
u8 sig;
err = broadsheet_spiflash_op_on_address(par, 0xAB, 0x00000000);
if (err)
goto failout;
err = broadsheet_spiflash_read_byte(par, &sig);
if (err)
goto failout;
if ((sig != 0x10) && (sig != 0x11)) {
dev_err(par->info->device, "Unexpected flash type\n");
err = -EINVAL;
goto failout;
}
*flash_type = sig;
failout:
broadsheet_write_reg(par, 0x0208, 0);
return err;
}
static int broadsheet_setup_for_wfm_write(struct broadsheetfb_par *par,
u16 *initial_sfmcd, int *flash_type)
{
int err;
err = broadsheet_setup_plls(par);
if (err)
return err;
broadsheet_write_reg(par, 0x0106, 0x0203);
err = broadsheet_setup_spi(par);
if (err)
return err;
err = broadsheet_setup_spiflash(par, initial_sfmcd);
if (err)
return err;
return broadsheet_verify_spiflash(par, flash_type);
}
static int broadsheet_spiflash_write_control(struct broadsheetfb_par *par,
int mode)
{
int err;
broadsheet_write_reg(par, 0x0208, 1);
if (mode)
err = broadsheet_spiflash_write_byte(par, 0x06);
else
err = broadsheet_spiflash_write_byte(par, 0x04);
broadsheet_write_reg(par, 0x0208, 0);
return err;
}
static int broadsheet_spiflash_erase_sector(struct broadsheetfb_par *par,
int addr)
{
int err;
broadsheet_spiflash_write_control(par, 1);
err = broadsheet_spiflash_op_on_address(par, 0xD8, addr);
broadsheet_write_reg(par, 0x0208, 0);
if (err)
return err;
err = broadsheet_spiflash_wait_for_status(par, 1000);
return err;
}
static int broadsheet_spiflash_read_range(struct broadsheetfb_par *par,
int addr, int size, char *data)
{
int err;
int i;
err = broadsheet_spiflash_op_on_address(par, 0x03, addr);
if (err)
goto failout;
for (i = 0; i < size; i++) {
err = broadsheet_spiflash_read_byte(par, &data[i]);
if (err)
goto failout;
}
failout:
broadsheet_write_reg(par, 0x0208, 0);
return err;
}
#define BS_SPIFLASH_PAGE_SIZE 256
static int broadsheet_spiflash_write_page(struct broadsheetfb_par *par,
int addr, const char *data)
{
int err;
int i;
broadsheet_spiflash_write_control(par, 1);
err = broadsheet_spiflash_op_on_address(par, 0x02, addr);
if (err)
goto failout;
for (i = 0; i < BS_SPIFLASH_PAGE_SIZE; i++) {
err = broadsheet_spiflash_write_byte(par, data[i]);
if (err)
goto failout;
}
broadsheet_write_reg(par, 0x0208, 0);
err = broadsheet_spiflash_wait_for_status(par, 100);
failout:
return err;
}
static int broadsheet_spiflash_write_sector(struct broadsheetfb_par *par,
int addr, const char *data, int sector_size)
{
int i;
int err;
for (i = 0; i < sector_size; i += BS_SPIFLASH_PAGE_SIZE) {
err = broadsheet_spiflash_write_page(par, addr + i, &data[i]);
if (err)
return err;
}
return 0;
}
/*
* The caller must guarantee that the data to be rewritten is entirely
* contained within this sector. That is, data_start_addr + data_len
* must be less than sector_start_addr + sector_size.
*/
static int broadsheet_spiflash_rewrite_sector(struct broadsheetfb_par *par,
int sector_size, int data_start_addr,
int data_len, const char *data)
{
int err;
char *sector_buffer;
int tail_start_addr;
int start_sector_addr;
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:03:40 +00:00
sector_buffer = kzalloc(sector_size, GFP_KERNEL);
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
if (!sector_buffer)
return -ENOMEM;
/* the start address of the sector is the 0th byte of that sector */
start_sector_addr = (data_start_addr / sector_size) * sector_size;
/*
* check if there is head data that we need to readback into our sector
* buffer first
*/
if (data_start_addr != start_sector_addr) {
/*
* we need to read every byte up till the start address of our
* data and we put it into our sector buffer.
*/
err = broadsheet_spiflash_read_range(par, start_sector_addr,
data_start_addr, sector_buffer);
if (err)
goto out;
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
}
/* now we copy our data into the right place in the sector buffer */
memcpy(sector_buffer + data_start_addr, data, data_len);
/*
* now we check if there is a tail section of the sector that we need to
* readback.
*/
tail_start_addr = (data_start_addr + data_len) % sector_size;
if (tail_start_addr) {
int tail_len;
tail_len = sector_size - tail_start_addr;
/* now we read this tail into our sector buffer */
err = broadsheet_spiflash_read_range(par, tail_start_addr,
tail_len, sector_buffer + tail_start_addr);
if (err)
goto out;
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
}
/* if we got here we have the full sector that we want to rewrite. */
/* first erase the sector */
err = broadsheet_spiflash_erase_sector(par, start_sector_addr);
if (err)
goto out;
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
/* now write it */
err = broadsheet_spiflash_write_sector(par, start_sector_addr,
sector_buffer, sector_size);
out:
kfree(sector_buffer);
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
return err;
}
static int broadsheet_write_spiflash(struct broadsheetfb_par *par, u32 wfm_addr,
const u8 *wfm, int bytecount, int flash_type)
{
int sector_size;
int err;
int cur_addr;
int writecount;
int maxlen;
int offset = 0;
switch (flash_type) {
case 0x10:
sector_size = 32*1024;
break;
case 0x11:
default:
sector_size = 64*1024;
break;
}
while (bytecount) {
cur_addr = wfm_addr + offset;
maxlen = roundup(cur_addr, sector_size) - cur_addr;
writecount = min(bytecount, maxlen);
err = broadsheet_spiflash_rewrite_sector(par, sector_size,
cur_addr, writecount, wfm + offset);
if (err)
return err;
offset += writecount;
bytecount -= writecount;
}
return 0;
}
static int broadsheet_store_waveform_to_spiflash(struct broadsheetfb_par *par,
const u8 *wfm, size_t wfm_size)
{
int err = 0;
u16 initial_sfmcd = 0;
int flash_type = 0;
err = broadsheet_setup_for_wfm_write(par, &initial_sfmcd, &flash_type);
if (err)
goto failout;
err = broadsheet_write_spiflash(par, 0x886, wfm, wfm_size, flash_type);
failout:
broadsheet_write_reg(par, 0x0204, initial_sfmcd);
return err;
}
static ssize_t broadsheet_loadstore_waveform(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t len)
{
int err;
struct fb_info *info = dev_get_drvdata(dev);
struct broadsheetfb_par *par = info->par;
const struct firmware *fw_entry;
if (len < 1)
return -EINVAL;
err = request_firmware(&fw_entry, "broadsheet.wbf", dev);
if (err < 0) {
dev_err(dev, "Failed to get broadsheet waveform\n");
goto err_failed;
}
/* try to enforce reasonable min max on waveform */
if ((fw_entry->size < 8*1024) || (fw_entry->size > 64*1024)) {
dev_err(dev, "Invalid waveform\n");
err = -EINVAL;
goto err_fw;
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
}
mutex_lock(&(par->io_lock));
err = broadsheet_store_waveform_to_spiflash(par, fw_entry->data,
fw_entry->size);
mutex_unlock(&(par->io_lock));
if (err < 0) {
dev_err(dev, "Failed to store broadsheet waveform\n");
goto err_fw;
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
}
dev_info(dev, "Stored broadsheet waveform, size %zd\n", fw_entry->size);
err = len;
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
err_fw:
release_firmware(fw_entry);
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
err_failed:
return err;
}
static DEVICE_ATTR(loadstore_waveform, S_IWUSR, NULL,
broadsheet_loadstore_waveform);
/* upper level functions that manipulate the display and other stuff */
static void broadsheet_init_display(struct broadsheetfb_par *par)
{
u16 args[5];
int xres = par->info->var.xres;
int yres = par->info->var.yres;
args[0] = panel_table[par->panel_index].w;
args[1] = panel_table[par->panel_index].h;
args[2] = panel_table[par->panel_index].sdcfg;
args[3] = panel_table[par->panel_index].gdcfg;
args[4] = panel_table[par->panel_index].lutfmt;
broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
/* did the controller really set it? */
broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
args[0] = panel_table[par->panel_index].fsynclen;
args[1] = panel_table[par->panel_index].fendfbegin;
args[2] = panel_table[par->panel_index].lsynclen;
args[3] = panel_table[par->panel_index].lendlbegin;
args[4] = panel_table[par->panel_index].pixclk;
broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_TMG, 5, args);
broadsheet_write_reg32(par, 0x310, xres*yres*2);
/* setup waveform */
args[0] = 0x886;
args[1] = 0;
broadsheet_send_cmdargs(par, BS_CMD_RD_WFM_INFO, 2, args);
broadsheet_send_command(par, BS_CMD_UPD_GDRV_CLR);
broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
broadsheet_write_reg(par, 0x330, 0x84);
broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
args[0] = (0x3 << 4);
broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
args[0] = 0x154;
broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
broadsheet_burst_write(par, (panel_table[par->panel_index].w *
panel_table[par->panel_index].h)/2,
(u16 *) par->info->screen_base);
broadsheet_send_command(par, BS_CMD_LD_IMG_END);
args[0] = 0x4300;
broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
par->board->wait_for_rdy(par);
}
static void broadsheet_identify(struct broadsheetfb_par *par)
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
{
u16 rev, prc;
struct device *dev = par->info->device;
rev = broadsheet_read_reg(par, BS_REG_REV);
prc = broadsheet_read_reg(par, BS_REG_PRC);
dev_info(dev, "Broadsheet Rev 0x%x, Product Code 0x%x\n", rev, prc);
if (prc != 0x0047)
dev_warn(dev, "Unrecognized Broadsheet Product Code\n");
if (rev != 0x0100)
dev_warn(dev, "Unrecognized Broadsheet Revision\n");
}
static void broadsheet_init(struct broadsheetfb_par *par)
{
broadsheet_send_command(par, BS_CMD_INIT_SYS_RUN);
/* the controller needs a second */
msleep(1000);
broadsheet_init_display(par);
}
static void broadsheetfb_dpy_update_pages(struct broadsheetfb_par *par,
u16 y1, u16 y2)
{
u16 args[5];
unsigned char *buf = (unsigned char *)par->info->screen_base;
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
mutex_lock(&(par->io_lock));
/* y1 must be a multiple of 4 so drop the lower bits */
y1 &= 0xFFFC;
/* y2 must be a multiple of 4 , but - 1 so up the lower bits */
y2 |= 0x0003;
args[0] = 0x3 << 4;
args[1] = 0;
args[2] = y1;
args[3] = cpu_to_le16(par->info->var.xres);
args[4] = y2;
broadsheet_send_cmdargs(par, BS_CMD_LD_IMG_AREA, 5, args);
args[0] = 0x154;
broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
buf += y1 * par->info->var.xres;
broadsheet_burst_write(par, ((1 + y2 - y1) * par->info->var.xres)/2,
(u16 *) buf);
broadsheet_send_command(par, BS_CMD_LD_IMG_END);
args[0] = 0x4300;
broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
par->board->wait_for_rdy(par);
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
mutex_unlock(&(par->io_lock));
}
static void broadsheetfb_dpy_update(struct broadsheetfb_par *par)
{
u16 args[5];
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
mutex_lock(&(par->io_lock));
args[0] = 0x3 << 4;
broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
args[0] = 0x154;
broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
broadsheet_burst_write(par, (panel_table[par->panel_index].w *
panel_table[par->panel_index].h)/2,
(u16 *) par->info->screen_base);
broadsheet_send_command(par, BS_CMD_LD_IMG_END);
args[0] = 0x4300;
broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
par->board->wait_for_rdy(par);
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
mutex_unlock(&(par->io_lock));
}
/* this is called back from the deferred io workqueue */
static void broadsheetfb_dpy_deferred_io(struct fb_info *info, struct list_head *pagereflist)
{
u16 y1 = 0, h = 0;
unsigned long prev_offset = ULONG_MAX;
fbdev: Track deferred-I/O pages in pageref struct Store the per-page state for fbdev's deferred I/O in struct fb_deferred_io_pageref. Maintain a list of pagerefs for the pages that have to be written back to video memory. Update all affected drivers. As with pages before, fbdev acquires a pageref when an mmaped page of the framebuffer is being written to. It holds the pageref in a list of all currently written pagerefs until it flushes the written pages to video memory. Writeback occurs periodically. After writeback fbdev releases all pagerefs and builds up a new dirty list until the next writeback occurs. Using pagerefs has a number of benefits. For pages of the framebuffer, the deferred I/O code used struct page.lru as an entry into the list of dirty pages. The lru field is owned by the page cache, which makes deferred I/O incompatible with some memory pages (e.g., most notably DRM's GEM SHMEM allocator). struct fb_deferred_io_pageref now provides an entry into a list of dirty framebuffer pages, freeing lru for use with the page cache. Drivers also assumed that struct page.index is the page offset into the framebuffer. This is not true for DRM buffers, which are located at various offset within a mapped area. struct fb_deferred_io_pageref explicitly stores an offset into the framebuffer. struct page.index is now only the page offset into the mapped area. These changes will allow DRM to use fbdev deferred I/O without an intermediate shadow buffer. v3: * use pageref->offset for sorting * fix grammar in comment v2: * minor fixes in commit message Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220429100834.18898-3-tzimmermann@suse.de
2022-04-29 10:08:31 +00:00
struct fb_deferred_io_pageref *pageref;
int h_inc;
u16 yres = info->var.yres;
u16 xres = info->var.xres;
/* height increment is fixed per page */
h_inc = DIV_ROUND_UP(PAGE_SIZE , xres);
/* walk the written page list and swizzle the data */
list_for_each_entry(pageref, pagereflist, list) {
if (prev_offset == ULONG_MAX) {
/* just starting so assign first page */
y1 = pageref->offset / xres;
h = h_inc;
} else if ((prev_offset + PAGE_SIZE) == pageref->offset) {
/* this page is consecutive so increase our height */
h += h_inc;
} else {
/* page not consecutive, issue previous update first */
broadsheetfb_dpy_update_pages(info->par, y1, y1 + h);
/* start over with our non consecutive page */
y1 = pageref->offset / xres;
h = h_inc;
}
prev_offset = pageref->offset;
}
/* if we still have any pages to update we do so now */
if (h >= yres) {
/* its a full screen update, just do it */
broadsheetfb_dpy_update(info->par);
} else {
broadsheetfb_dpy_update_pages(info->par, y1,
min((u16) (y1 + h), yres));
}
}
static void broadsheetfb_fillrect(struct fb_info *info,
const struct fb_fillrect *rect)
{
struct broadsheetfb_par *par = info->par;
sys_fillrect(info, rect);
broadsheetfb_dpy_update(par);
}
static void broadsheetfb_copyarea(struct fb_info *info,
const struct fb_copyarea *area)
{
struct broadsheetfb_par *par = info->par;
sys_copyarea(info, area);
broadsheetfb_dpy_update(par);
}
static void broadsheetfb_imageblit(struct fb_info *info,
const struct fb_image *image)
{
struct broadsheetfb_par *par = info->par;
sys_imageblit(info, image);
broadsheetfb_dpy_update(par);
}
/*
* this is the slow path from userspace. they can seek and write to
* the fb. it's inefficient to do anything less than a full screen draw
*/
static ssize_t broadsheetfb_write(struct fb_info *info, const char __user *buf,
size_t count, loff_t *ppos)
{
struct broadsheetfb_par *par = info->par;
unsigned long p = *ppos;
void *dst;
int err = 0;
unsigned long total_size;
if (info->state != FBINFO_STATE_RUNNING)
return -EPERM;
total_size = info->fix.smem_len;
if (p > total_size)
return -EFBIG;
if (count > total_size) {
err = -EFBIG;
count = total_size;
}
if (count + p > total_size) {
if (!err)
err = -ENOSPC;
count = total_size - p;
}
dst = (void *)(info->screen_base + p);
if (copy_from_user(dst, buf, count))
err = -EFAULT;
if (!err)
*ppos += count;
broadsheetfb_dpy_update(par);
return (err) ? err : count;
}
static const struct fb_ops broadsheetfb_ops = {
.owner = THIS_MODULE,
.fb_read = fb_sys_read,
.fb_write = broadsheetfb_write,
.fb_fillrect = broadsheetfb_fillrect,
.fb_copyarea = broadsheetfb_copyarea,
.fb_imageblit = broadsheetfb_imageblit,
.fb_mmap = fb_deferred_io_mmap,
};
static struct fb_deferred_io broadsheetfb_defio = {
.delay = HZ/4,
.sort_pagereflist = true,
.deferred_io = broadsheetfb_dpy_deferred_io,
};
static int broadsheetfb_probe(struct platform_device *dev)
{
struct fb_info *info;
struct broadsheet_board *board;
int retval = -ENOMEM;
int videomemorysize;
unsigned char *videomemory;
struct broadsheetfb_par *par;
int i;
int dpyw, dpyh;
int panel_index;
/* pick up board specific routines */
board = dev->dev.platform_data;
if (!board)
return -EINVAL;
/* try to count device specific driver, if can't, platform recalls */
if (!try_module_get(board->owner))
return -ENODEV;
info = framebuffer_alloc(sizeof(struct broadsheetfb_par), &dev->dev);
if (!info)
goto err;
switch (board->get_panel_type()) {
case 37:
panel_index = 1;
break;
case 97:
panel_index = 2;
break;
case 6:
default:
panel_index = 0;
break;
}
dpyw = panel_table[panel_index].w;
dpyh = panel_table[panel_index].h;
videomemorysize = roundup((dpyw*dpyh), PAGE_SIZE);
videomemory = vzalloc(videomemorysize);
if (!videomemory)
goto err_fb_rel;
info->screen_base = (char *)videomemory;
info->fbops = &broadsheetfb_ops;
broadsheetfb_var.xres = dpyw;
broadsheetfb_var.yres = dpyh;
broadsheetfb_var.xres_virtual = dpyw;
broadsheetfb_var.yres_virtual = dpyh;
info->var = broadsheetfb_var;
broadsheetfb_fix.line_length = dpyw;
info->fix = broadsheetfb_fix;
info->fix.smem_len = videomemorysize;
par = info->par;
par->panel_index = panel_index;
par->info = info;
par->board = board;
par->write_reg = broadsheet_write_reg;
par->read_reg = broadsheet_read_reg;
init_waitqueue_head(&par->waitq);
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
mutex_init(&par->io_lock);
info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
info->fbdefio = &broadsheetfb_defio;
fb_deferred_io_init(info);
retval = fb_alloc_cmap(&info->cmap, 16, 0);
if (retval < 0) {
dev_err(&dev->dev, "Failed to allocate colormap\n");
goto err_vfree;
}
/* set cmap */
for (i = 0; i < 16; i++)
info->cmap.red[i] = (((2*i)+1)*(0xFFFF))/32;
memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*16);
memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*16);
retval = par->board->setup_irq(info);
if (retval < 0)
goto err_cmap;
/* this inits the dpy */
retval = board->init(par);
if (retval < 0)
goto err_free_irq;
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
broadsheet_identify(par);
broadsheet_init(par);
retval = register_framebuffer(info);
if (retval < 0)
goto err_free_irq;
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
platform_set_drvdata(dev, info);
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
retval = device_create_file(&dev->dev, &dev_attr_loadstore_waveform);
if (retval < 0)
goto err_unreg_fb;
fb_info(info, "Broadsheet frame buffer, using %dK of video memory\n",
videomemorysize >> 10);
return 0;
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
err_unreg_fb:
unregister_framebuffer(info);
err_free_irq:
board->cleanup(par);
err_cmap:
fb_dealloc_cmap(&info->cmap);
err_vfree:
vfree(videomemory);
err_fb_rel:
framebuffer_release(info);
err:
module_put(board->owner);
return retval;
}
static int broadsheetfb_remove(struct platform_device *dev)
{
struct fb_info *info = platform_get_drvdata(dev);
if (info) {
struct broadsheetfb_par *par = info->par;
broadsheetfb: support storing waveform This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10 23:21:43 +00:00
device_remove_file(info->dev, &dev_attr_loadstore_waveform);
unregister_framebuffer(info);
fb_deferred_io_cleanup(info);
par->board->cleanup(par);
fb_dealloc_cmap(&info->cmap);
vfree((void *)info->screen_base);
module_put(par->board->owner);
framebuffer_release(info);
}
return 0;
}
static struct platform_driver broadsheetfb_driver = {
.probe = broadsheetfb_probe,
.remove = broadsheetfb_remove,
.driver = {
.name = "broadsheetfb",
},
};
module_platform_driver(broadsheetfb_driver);
MODULE_DESCRIPTION("fbdev driver for Broadsheet controller");
MODULE_AUTHOR("Jaya Kumar");
MODULE_LICENSE("GPL");