2021-06-11 10:53:47 +00:00
|
|
|
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
|
|
|
|
=========================
|
|
|
|
MDIO bus and PHYs in ACPI
|
|
|
|
=========================
|
|
|
|
|
2021-12-01 12:59:32 +00:00
|
|
|
The PHYs on an MDIO bus [phy] are probed and registered using
|
2021-06-11 10:53:47 +00:00
|
|
|
fwnode_mdiobus_register_phy().
|
|
|
|
|
|
|
|
Later, for connecting these PHYs to their respective MACs, the PHYs registered
|
|
|
|
on the MDIO bus have to be referenced.
|
|
|
|
|
|
|
|
This document introduces two _DSD properties that are to be used
|
2021-12-01 12:59:32 +00:00
|
|
|
for connecting PHYs on the MDIO bus [dsd-properties-rules] to the MAC layer.
|
2021-06-11 10:53:47 +00:00
|
|
|
|
|
|
|
These properties are defined in accordance with the "Device
|
2021-12-01 12:59:32 +00:00
|
|
|
Properties UUID For _DSD" [dsd-guide] document and the
|
2021-06-11 10:53:47 +00:00
|
|
|
daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device
|
|
|
|
Data Descriptors containing them.
|
|
|
|
|
|
|
|
phy-handle
|
|
|
|
----------
|
|
|
|
For each MAC node, a device property "phy-handle" is used to reference
|
|
|
|
the PHY that is registered on an MDIO bus. This is mandatory for
|
|
|
|
network interfaces that have PHYs connected to MAC via MDIO bus.
|
|
|
|
|
|
|
|
During the MDIO bus driver initialization, PHYs on this bus are probed
|
|
|
|
using the _ADR object as shown below and are registered on the MDIO bus.
|
|
|
|
|
2021-06-17 15:55:52 +00:00
|
|
|
.. code-block:: none
|
|
|
|
|
2021-06-11 10:53:47 +00:00
|
|
|
Scope(\_SB.MDI0)
|
|
|
|
{
|
|
|
|
Device(PHY1) {
|
|
|
|
Name (_ADR, 0x1)
|
|
|
|
} // end of PHY1
|
|
|
|
|
|
|
|
Device(PHY2) {
|
|
|
|
Name (_ADR, 0x2)
|
|
|
|
} // end of PHY2
|
|
|
|
}
|
|
|
|
|
|
|
|
Later, during the MAC driver initialization, the registered PHY devices
|
|
|
|
have to be retrieved from the MDIO bus. For this, the MAC driver needs
|
|
|
|
references to the previously registered PHYs which are provided
|
|
|
|
as device object references (e.g. \_SB.MDI0.PHY1).
|
|
|
|
|
|
|
|
phy-mode
|
|
|
|
--------
|
|
|
|
The "phy-mode" _DSD property is used to describe the connection to
|
2021-12-01 12:59:32 +00:00
|
|
|
the PHY. The valid values for "phy-mode" are defined in [ethernet-controller].
|
2021-06-11 10:53:47 +00:00
|
|
|
|
2021-06-21 17:30:23 +00:00
|
|
|
managed
|
|
|
|
-------
|
|
|
|
Optional property, which specifies the PHY management type.
|
2021-12-01 12:59:32 +00:00
|
|
|
The valid values for "managed" are defined in [ethernet-controller].
|
2021-06-21 17:30:23 +00:00
|
|
|
|
|
|
|
fixed-link
|
|
|
|
----------
|
|
|
|
The "fixed-link" is described by a data-only subnode of the
|
|
|
|
MAC port, which is linked in the _DSD package via
|
|
|
|
hierarchical data extension (UUID dbb8e3e6-5886-4ba6-8795-1319f52a966b
|
2021-12-01 12:59:32 +00:00
|
|
|
in accordance with [dsd-guide] "_DSD Implementation Guide" document).
|
2021-06-21 17:30:23 +00:00
|
|
|
The subnode should comprise a required property ("speed") and
|
|
|
|
possibly the optional ones - complete list of parameters and
|
2021-12-01 12:59:32 +00:00
|
|
|
their values are specified in [ethernet-controller].
|
2021-06-21 17:30:23 +00:00
|
|
|
|
2021-06-11 10:53:47 +00:00
|
|
|
The following ASL example illustrates the usage of these properties.
|
|
|
|
|
|
|
|
DSDT entry for MDIO node
|
|
|
|
------------------------
|
|
|
|
|
|
|
|
The MDIO bus has an SoC component (MDIO controller) and a platform
|
|
|
|
component (PHYs on the MDIO bus).
|
|
|
|
|
|
|
|
a) Silicon Component
|
|
|
|
This node describes the MDIO controller, MDI0
|
|
|
|
---------------------------------------------
|
2021-06-17 15:55:52 +00:00
|
|
|
|
|
|
|
.. code-block:: none
|
|
|
|
|
2021-06-11 10:53:47 +00:00
|
|
|
Scope(_SB)
|
|
|
|
{
|
|
|
|
Device(MDI0) {
|
|
|
|
Name(_HID, "NXP0006")
|
|
|
|
Name(_CCA, 1)
|
|
|
|
Name(_UID, 0)
|
|
|
|
Name(_CRS, ResourceTemplate() {
|
|
|
|
Memory32Fixed(ReadWrite, MDI0_BASE, MDI_LEN)
|
|
|
|
Interrupt(ResourceConsumer, Level, ActiveHigh, Shared)
|
|
|
|
{
|
|
|
|
MDI0_IT
|
|
|
|
}
|
|
|
|
}) // end of _CRS for MDI0
|
|
|
|
} // end of MDI0
|
|
|
|
}
|
|
|
|
|
|
|
|
b) Platform Component
|
|
|
|
The PHY1 and PHY2 nodes represent the PHYs connected to MDIO bus MDI0
|
|
|
|
---------------------------------------------------------------------
|
2021-06-17 15:55:52 +00:00
|
|
|
|
|
|
|
.. code-block:: none
|
|
|
|
|
2021-06-11 10:53:47 +00:00
|
|
|
Scope(\_SB.MDI0)
|
|
|
|
{
|
|
|
|
Device(PHY1) {
|
|
|
|
Name (_ADR, 0x1)
|
|
|
|
} // end of PHY1
|
|
|
|
|
|
|
|
Device(PHY2) {
|
|
|
|
Name (_ADR, 0x2)
|
|
|
|
} // end of PHY2
|
|
|
|
}
|
|
|
|
|
|
|
|
DSDT entries representing MAC nodes
|
|
|
|
-----------------------------------
|
|
|
|
|
|
|
|
Below are the MAC nodes where PHY nodes are referenced.
|
|
|
|
phy-mode and phy-handle are used as explained earlier.
|
|
|
|
------------------------------------------------------
|
2021-06-17 15:55:52 +00:00
|
|
|
|
|
|
|
.. code-block:: none
|
|
|
|
|
2021-06-11 10:53:47 +00:00
|
|
|
Scope(\_SB.MCE0.PR17)
|
|
|
|
{
|
|
|
|
Name (_DSD, Package () {
|
|
|
|
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
|
|
|
|
Package () {
|
|
|
|
Package (2) {"phy-mode", "rgmii-id"},
|
|
|
|
Package (2) {"phy-handle", \_SB.MDI0.PHY1}
|
|
|
|
}
|
|
|
|
})
|
|
|
|
}
|
|
|
|
|
|
|
|
Scope(\_SB.MCE0.PR18)
|
|
|
|
{
|
|
|
|
Name (_DSD, Package () {
|
|
|
|
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
|
|
|
|
Package () {
|
|
|
|
Package (2) {"phy-mode", "rgmii-id"},
|
|
|
|
Package (2) {"phy-handle", \_SB.MDI0.PHY2}}
|
|
|
|
}
|
|
|
|
})
|
|
|
|
}
|
|
|
|
|
2021-06-21 17:30:23 +00:00
|
|
|
MAC node example where "managed" property is specified.
|
|
|
|
-------------------------------------------------------
|
|
|
|
|
|
|
|
.. code-block:: none
|
|
|
|
|
|
|
|
Scope(\_SB.PP21.ETH0)
|
|
|
|
{
|
|
|
|
Name (_DSD, Package () {
|
|
|
|
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
|
|
|
|
Package () {
|
|
|
|
Package () {"phy-mode", "sgmii"},
|
|
|
|
Package () {"managed", "in-band-status"}
|
|
|
|
}
|
|
|
|
})
|
|
|
|
}
|
|
|
|
|
|
|
|
MAC node example with a "fixed-link" subnode.
|
|
|
|
---------------------------------------------
|
|
|
|
|
|
|
|
.. code-block:: none
|
|
|
|
|
|
|
|
Scope(\_SB.PP21.ETH1)
|
|
|
|
{
|
|
|
|
Name (_DSD, Package () {
|
|
|
|
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
|
|
|
|
Package () {
|
|
|
|
Package () {"phy-mode", "sgmii"},
|
|
|
|
},
|
|
|
|
ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
|
|
|
|
Package () {
|
|
|
|
Package () {"fixed-link", "LNK0"}
|
|
|
|
}
|
|
|
|
})
|
|
|
|
Name (LNK0, Package(){ // Data-only subnode of port
|
|
|
|
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
|
|
|
|
Package () {
|
|
|
|
Package () {"speed", 1000},
|
|
|
|
Package () {"full-duplex", 1}
|
|
|
|
}
|
|
|
|
})
|
|
|
|
}
|
|
|
|
|
2021-06-11 10:53:47 +00:00
|
|
|
References
|
|
|
|
==========
|
|
|
|
|
2021-12-01 12:59:32 +00:00
|
|
|
[phy] Documentation/networking/phy.rst
|
2021-06-11 10:53:47 +00:00
|
|
|
|
2021-12-01 12:59:32 +00:00
|
|
|
[dsd-properties-rules]
|
|
|
|
Documentation/firmware-guide/acpi/DSD-properties-rules.rst
|
2021-06-11 10:53:47 +00:00
|
|
|
|
2021-12-01 12:59:32 +00:00
|
|
|
[ethernet-controller]
|
|
|
|
Documentation/devicetree/bindings/net/ethernet-controller.yaml
|
2021-06-11 10:53:47 +00:00
|
|
|
|
2021-12-01 12:59:32 +00:00
|
|
|
[dsd-guide] DSD Guide.
|
|
|
|
https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.adoc, referenced
|
|
|
|
2021-11-30.
|