linux-stable/fs/xfs/xfs_inode.h

579 lines
17 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2003,2005 Silicon Graphics, Inc.
* All Rights Reserved.
*/
#ifndef __XFS_INODE_H__
#define __XFS_INODE_H__
#include "xfs_inode_buf.h"
#include "xfs_inode_fork.h"
/*
* Kernel only inode definitions
*/
struct xfs_dinode;
struct xfs_inode;
struct xfs_buf;
struct xfs_bmbt_irec;
struct xfs_inode_log_item;
struct xfs_mount;
struct xfs_trans;
struct xfs_dquot;
typedef struct xfs_inode {
/* Inode linking and identification information. */
struct xfs_mount *i_mount; /* fs mount struct ptr */
struct xfs_dquot *i_udquot; /* user dquot */
struct xfs_dquot *i_gdquot; /* group dquot */
struct xfs_dquot *i_pdquot; /* project dquot */
/* Inode location stuff */
xfs_ino_t i_ino; /* inode number (agno/agino)*/
struct xfs_imap i_imap; /* location for xfs_imap() */
/* Extent information. */
struct xfs_ifork *i_cowfp; /* copy on write extents */
struct xfs_ifork i_df; /* data fork */
xfs: make inode attribute forks a permanent part of struct xfs_inode Syzkaller reported a UAF bug a while back: ================================================================== BUG: KASAN: use-after-free in xfs_ilock_attr_map_shared+0xe3/0xf6 fs/xfs/xfs_inode.c:127 Read of size 4 at addr ffff88802cec919c by task syz-executor262/2958 CPU: 2 PID: 2958 Comm: syz-executor262 Not tainted 5.15.0-0.30.3-20220406_1406 #3 Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7860+a7792d29 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106 print_address_description.constprop.9+0x21/0x2d5 mm/kasan/report.c:256 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold.14+0x7f/0x11b mm/kasan/report.c:459 xfs_ilock_attr_map_shared+0xe3/0xf6 fs/xfs/xfs_inode.c:127 xfs_attr_get+0x378/0x4c2 fs/xfs/libxfs/xfs_attr.c:159 xfs_xattr_get+0xe3/0x150 fs/xfs/xfs_xattr.c:36 __vfs_getxattr+0xdf/0x13d fs/xattr.c:399 cap_inode_need_killpriv+0x41/0x5d security/commoncap.c:300 security_inode_need_killpriv+0x4c/0x97 security/security.c:1408 dentry_needs_remove_privs.part.28+0x21/0x63 fs/inode.c:1912 dentry_needs_remove_privs+0x80/0x9e fs/inode.c:1908 do_truncate+0xc3/0x1e0 fs/open.c:56 handle_truncate fs/namei.c:3084 [inline] do_open fs/namei.c:3432 [inline] path_openat+0x30ab/0x396d fs/namei.c:3561 do_filp_open+0x1c4/0x290 fs/namei.c:3588 do_sys_openat2+0x60d/0x98c fs/open.c:1212 do_sys_open+0xcf/0x13c fs/open.c:1228 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0x0 RIP: 0033:0x7f7ef4bb753d Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 79 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007f7ef52c2ed8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 RAX: ffffffffffffffda RBX: 0000000000404148 RCX: 00007f7ef4bb753d RDX: 00007f7ef4bb753d RSI: 0000000000000000 RDI: 0000000020004fc0 RBP: 0000000000404140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0030656c69662f2e R13: 00007ffd794db37f R14: 00007ffd794db470 R15: 00007f7ef52c2fc0 </TASK> Allocated by task 2953: kasan_save_stack+0x19/0x38 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x68/0x7c mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:254 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3213 [inline] slab_alloc mm/slub.c:3221 [inline] kmem_cache_alloc+0x11b/0x3eb mm/slub.c:3226 kmem_cache_zalloc include/linux/slab.h:711 [inline] xfs_ifork_alloc+0x25/0xa2 fs/xfs/libxfs/xfs_inode_fork.c:287 xfs_bmap_add_attrfork+0x3f2/0x9b1 fs/xfs/libxfs/xfs_bmap.c:1098 xfs_attr_set+0xe38/0x12a7 fs/xfs/libxfs/xfs_attr.c:746 xfs_xattr_set+0xeb/0x1a9 fs/xfs/xfs_xattr.c:59 __vfs_setxattr+0x11b/0x177 fs/xattr.c:180 __vfs_setxattr_noperm+0x128/0x5e0 fs/xattr.c:214 __vfs_setxattr_locked+0x1d4/0x258 fs/xattr.c:275 vfs_setxattr+0x154/0x33d fs/xattr.c:301 setxattr+0x216/0x29f fs/xattr.c:575 __do_sys_fsetxattr fs/xattr.c:632 [inline] __se_sys_fsetxattr fs/xattr.c:621 [inline] __x64_sys_fsetxattr+0x243/0x2fe fs/xattr.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0x0 Freed by task 2949: kasan_save_stack+0x19/0x38 mm/kasan/common.c:38 kasan_set_track+0x1c/0x21 mm/kasan/common.c:46 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:360 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free mm/kasan/common.c:328 [inline] __kasan_slab_free+0xe2/0x10e mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_hook mm/slub.c:1700 [inline] slab_free_freelist_hook mm/slub.c:1726 [inline] slab_free mm/slub.c:3492 [inline] kmem_cache_free+0xdc/0x3ce mm/slub.c:3508 xfs_attr_fork_remove+0x8d/0x132 fs/xfs/libxfs/xfs_attr_leaf.c:773 xfs_attr_sf_removename+0x5dd/0x6cb fs/xfs/libxfs/xfs_attr_leaf.c:822 xfs_attr_remove_iter+0x68c/0x805 fs/xfs/libxfs/xfs_attr.c:1413 xfs_attr_remove_args+0xb1/0x10d fs/xfs/libxfs/xfs_attr.c:684 xfs_attr_set+0xf1e/0x12a7 fs/xfs/libxfs/xfs_attr.c:802 xfs_xattr_set+0xeb/0x1a9 fs/xfs/xfs_xattr.c:59 __vfs_removexattr+0x106/0x16a fs/xattr.c:468 cap_inode_killpriv+0x24/0x47 security/commoncap.c:324 security_inode_killpriv+0x54/0xa1 security/security.c:1414 setattr_prepare+0x1a6/0x897 fs/attr.c:146 xfs_vn_change_ok+0x111/0x15e fs/xfs/xfs_iops.c:682 xfs_vn_setattr_size+0x5f/0x15a fs/xfs/xfs_iops.c:1065 xfs_vn_setattr+0x125/0x2ad fs/xfs/xfs_iops.c:1093 notify_change+0xae5/0x10a1 fs/attr.c:410 do_truncate+0x134/0x1e0 fs/open.c:64 handle_truncate fs/namei.c:3084 [inline] do_open fs/namei.c:3432 [inline] path_openat+0x30ab/0x396d fs/namei.c:3561 do_filp_open+0x1c4/0x290 fs/namei.c:3588 do_sys_openat2+0x60d/0x98c fs/open.c:1212 do_sys_open+0xcf/0x13c fs/open.c:1228 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0x0 The buggy address belongs to the object at ffff88802cec9188 which belongs to the cache xfs_ifork of size 40 The buggy address is located 20 bytes inside of 40-byte region [ffff88802cec9188, ffff88802cec91b0) The buggy address belongs to the page: page:00000000c3af36a1 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2cec9 flags: 0xfffffc0000200(slab|node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0000200 ffffea00009d2580 0000000600000006 ffff88801a9ffc80 raw: 0000000000000000 0000000080490049 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88802cec9080: fb fb fb fc fc fa fb fb fb fb fc fc fb fb fb fb ffff88802cec9100: fb fc fc fb fb fb fb fb fc fc fb fb fb fb fb fc >ffff88802cec9180: fc fa fb fb fb fb fc fc fa fb fb fb fb fc fc fb ^ ffff88802cec9200: fb fb fb fb fc fc fb fb fb fb fb fc fc fb fb fb ffff88802cec9280: fb fb fc fc fa fb fb fb fb fc fc fa fb fb fb fb ================================================================== The root cause of this bug is the unlocked access to xfs_inode.i_afp from the getxattr code paths while trying to determine which ILOCK mode to use to stabilize the xattr data. Unfortunately, the VFS does not acquire i_rwsem when vfs_getxattr (or listxattr) call into the filesystem, which means that getxattr can race with a removexattr that's tearing down the attr fork and crash: xfs_attr_set: xfs_attr_get: xfs_attr_fork_remove: xfs_ilock_attr_map_shared: xfs_idestroy_fork(ip->i_afp); kmem_cache_free(xfs_ifork_cache, ip->i_afp); if (ip->i_afp && ip->i_afp = NULL; xfs_need_iread_extents(ip->i_afp)) <KABOOM> ip->i_forkoff = 0; Regrettably, the VFS is much more lax about i_rwsem and getxattr than is immediately obvious -- not only does it not guarantee that we hold i_rwsem, it actually doesn't guarantee that we *don't* hold it either. The getxattr system call won't acquire the lock before calling XFS, but the file capabilities code calls getxattr with and without i_rwsem held to determine if the "security.capabilities" xattr is set on the file. Fixing the VFS locking requires a treewide investigation into every code path that could touch an xattr and what i_rwsem state it expects or sets up. That could take years or even prove impossible; fortunately, we can fix this UAF problem inside XFS. An earlier version of this patch used smp_wmb in xfs_attr_fork_remove to ensure that i_forkoff is always zeroed before i_afp is set to null and changed the read paths to use smp_rmb before accessing i_forkoff and i_afp, which avoided these UAF problems. However, the patch author was too busy dealing with other problems in the meantime, and by the time he came back to this issue, the situation had changed a bit. On a modern system with selinux, each inode will always have at least one xattr for the selinux label, so it doesn't make much sense to keep incurring the extra pointer dereference. Furthermore, Allison's upcoming parent pointer patchset will also cause nearly every inode in the filesystem to have extended attributes. Therefore, make the inode attribute fork structure part of struct xfs_inode, at a cost of 40 more bytes. This patch adds a clunky if_present field where necessary to maintain the existing logic of xattr fork null pointer testing in the existing codebase. The next patch switches the logic over to XFS_IFORK_Q and it all goes away. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2022-07-09 17:56:06 +00:00
struct xfs_ifork i_af; /* attribute fork */
/* Transaction and locking information. */
struct xfs_inode_log_item *i_itemp; /* logging information */
mrlock_t i_lock; /* inode lock */
atomic_t i_pincount; /* inode pin count */
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
struct llist_node i_gclist; /* deferred inactivation list */
/*
* Bitsets of inode metadata that have been checked and/or are sick.
* Callers must hold i_flags_lock before accessing this field.
*/
uint16_t i_checked;
uint16_t i_sick;
spinlock_t i_flags_lock; /* inode i_flags lock */
/* Miscellaneous state. */
unsigned long i_flags; /* see defined flags below */
uint64_t i_delayed_blks; /* count of delay alloc blks */
xfs_fsize_t i_disk_size; /* number of bytes in file */
xfs_rfsblock_t i_nblocks; /* # of direct & btree blocks */
prid_t i_projid; /* owner's project id */
xfs_extlen_t i_extsize; /* basic/minimum extent size */
/* cowextsize is only used for v3 inodes, flushiter for v1/2 */
union {
xfs_extlen_t i_cowextsize; /* basic cow extent size */
uint16_t i_flushiter; /* incremented on flush */
};
uint8_t i_forkoff; /* attr fork offset >> 3 */
uint16_t i_diflags; /* XFS_DIFLAG_... */
uint64_t i_diflags2; /* XFS_DIFLAG2_... */
struct timespec64 i_crtime; /* time created */
/* unlinked list pointers */
xfs_agino_t i_next_unlinked;
xfs: double link the unlinked inode list Now we have forwards traversal via the incore inode in place, we now need to add back pointers to the incore inode to entirely replace the back reference cache. We use the same lookup semantics and constraints as for the forwards pointer lookups during unlinks, and so we can look up any inode in the unlinked list directly and update the list pointers, forwards or backwards, at any time. The only wrinkle in converting the unlinked list manipulations to use in-core previous pointers is that log recovery doesn't have the incore inode state built up so it can't just read in an inode and release it to finish off the unlink. Hence we need to modify the traversal in recovery to read one inode ahead before we release the inode at the head of the list. This populates the next->prev relationship sufficient to be able to replay the unlinked list and hence greatly simplify the runtime code. This recovery algorithm also requires that we actually remove inodes from the unlinked list one at a time as background inode inactivation will result in unlinked list removal racing with the building of the in-memory unlinked list state. We could serialise this by holding the AGI buffer lock when constructing the in memory state, but all that does is lockstep background processing with list building. It is much simpler to flush the inodegc immediately after releasing the inode so that it is unlinked immediately and there is no races present at all. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2022-07-14 01:46:43 +00:00
xfs_agino_t i_prev_unlinked;
/* VFS inode */
struct inode i_vnode; /* embedded VFS inode */
xfs: implement per-inode writeback completion queues When scheduling writeback of dirty file data in the page cache, XFS uses IO completion workqueue items to ensure that filesystem metadata only updates after the write completes successfully. This is essential for converting unwritten extents to real extents at the right time and performing COW remappings. Unfortunately, XFS queues each IO completion work item to an unbounded workqueue, which means that the kernel can spawn dozens of threads to try to handle the items quickly. These threads need to take the ILOCK to update file metadata, which results in heavy ILOCK contention if a large number of the work items target a single file, which is inefficient. Worse yet, the writeback completion threads get stuck waiting for the ILOCK while holding transaction reservations, which can use up all available log reservation space. When that happens, metadata updates to other parts of the filesystem grind to a halt, even if the filesystem could otherwise have handled it. Even worse, if one of the things grinding to a halt happens to be a thread in the middle of a defer-ops finish holding the same ILOCK and trying to obtain more log reservation having exhausted the permanent reservation, we now have an ABBA deadlock - writeback completion has a transaction reserved and wants the ILOCK, and someone else has the ILOCK and wants a transaction reservation. Therefore, we create a per-inode writeback io completion queue + work item. When writeback finishes, it can add the ioend to the per-inode queue and let the single worker item process that queue. This dramatically cuts down on the number of kworkers and ILOCK contention in the system, and seems to have eliminated an occasional deadlock I was seeing while running generic/476. Testing with a program that simulates a heavy random-write workload to a single file demonstrates that the number of kworkers drops from approximately 120 threads per file to 1, without dramatically changing write bandwidth or pagecache access latency. Note that we leave the xfs-conv workqueue's max_active alone because we still want to be able to run ioend processing for as many inodes as the system can handle. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-15 20:13:20 +00:00
/* pending io completions */
spinlock_t i_ioend_lock;
struct work_struct i_ioend_work;
struct list_head i_ioend_list;
} xfs_inode_t;
static inline bool xfs_inode_has_attr_fork(struct xfs_inode *ip)
{
return ip->i_forkoff > 0;
}
static inline struct xfs_ifork *
xfs_ifork_ptr(
struct xfs_inode *ip,
int whichfork)
{
switch (whichfork) {
case XFS_DATA_FORK:
return &ip->i_df;
case XFS_ATTR_FORK:
if (!xfs_inode_has_attr_fork(ip))
xfs: make inode attribute forks a permanent part of struct xfs_inode Syzkaller reported a UAF bug a while back: ================================================================== BUG: KASAN: use-after-free in xfs_ilock_attr_map_shared+0xe3/0xf6 fs/xfs/xfs_inode.c:127 Read of size 4 at addr ffff88802cec919c by task syz-executor262/2958 CPU: 2 PID: 2958 Comm: syz-executor262 Not tainted 5.15.0-0.30.3-20220406_1406 #3 Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7860+a7792d29 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106 print_address_description.constprop.9+0x21/0x2d5 mm/kasan/report.c:256 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold.14+0x7f/0x11b mm/kasan/report.c:459 xfs_ilock_attr_map_shared+0xe3/0xf6 fs/xfs/xfs_inode.c:127 xfs_attr_get+0x378/0x4c2 fs/xfs/libxfs/xfs_attr.c:159 xfs_xattr_get+0xe3/0x150 fs/xfs/xfs_xattr.c:36 __vfs_getxattr+0xdf/0x13d fs/xattr.c:399 cap_inode_need_killpriv+0x41/0x5d security/commoncap.c:300 security_inode_need_killpriv+0x4c/0x97 security/security.c:1408 dentry_needs_remove_privs.part.28+0x21/0x63 fs/inode.c:1912 dentry_needs_remove_privs+0x80/0x9e fs/inode.c:1908 do_truncate+0xc3/0x1e0 fs/open.c:56 handle_truncate fs/namei.c:3084 [inline] do_open fs/namei.c:3432 [inline] path_openat+0x30ab/0x396d fs/namei.c:3561 do_filp_open+0x1c4/0x290 fs/namei.c:3588 do_sys_openat2+0x60d/0x98c fs/open.c:1212 do_sys_open+0xcf/0x13c fs/open.c:1228 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0x0 RIP: 0033:0x7f7ef4bb753d Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 79 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007f7ef52c2ed8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 RAX: ffffffffffffffda RBX: 0000000000404148 RCX: 00007f7ef4bb753d RDX: 00007f7ef4bb753d RSI: 0000000000000000 RDI: 0000000020004fc0 RBP: 0000000000404140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0030656c69662f2e R13: 00007ffd794db37f R14: 00007ffd794db470 R15: 00007f7ef52c2fc0 </TASK> Allocated by task 2953: kasan_save_stack+0x19/0x38 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x68/0x7c mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:254 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3213 [inline] slab_alloc mm/slub.c:3221 [inline] kmem_cache_alloc+0x11b/0x3eb mm/slub.c:3226 kmem_cache_zalloc include/linux/slab.h:711 [inline] xfs_ifork_alloc+0x25/0xa2 fs/xfs/libxfs/xfs_inode_fork.c:287 xfs_bmap_add_attrfork+0x3f2/0x9b1 fs/xfs/libxfs/xfs_bmap.c:1098 xfs_attr_set+0xe38/0x12a7 fs/xfs/libxfs/xfs_attr.c:746 xfs_xattr_set+0xeb/0x1a9 fs/xfs/xfs_xattr.c:59 __vfs_setxattr+0x11b/0x177 fs/xattr.c:180 __vfs_setxattr_noperm+0x128/0x5e0 fs/xattr.c:214 __vfs_setxattr_locked+0x1d4/0x258 fs/xattr.c:275 vfs_setxattr+0x154/0x33d fs/xattr.c:301 setxattr+0x216/0x29f fs/xattr.c:575 __do_sys_fsetxattr fs/xattr.c:632 [inline] __se_sys_fsetxattr fs/xattr.c:621 [inline] __x64_sys_fsetxattr+0x243/0x2fe fs/xattr.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0x0 Freed by task 2949: kasan_save_stack+0x19/0x38 mm/kasan/common.c:38 kasan_set_track+0x1c/0x21 mm/kasan/common.c:46 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:360 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free mm/kasan/common.c:328 [inline] __kasan_slab_free+0xe2/0x10e mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_hook mm/slub.c:1700 [inline] slab_free_freelist_hook mm/slub.c:1726 [inline] slab_free mm/slub.c:3492 [inline] kmem_cache_free+0xdc/0x3ce mm/slub.c:3508 xfs_attr_fork_remove+0x8d/0x132 fs/xfs/libxfs/xfs_attr_leaf.c:773 xfs_attr_sf_removename+0x5dd/0x6cb fs/xfs/libxfs/xfs_attr_leaf.c:822 xfs_attr_remove_iter+0x68c/0x805 fs/xfs/libxfs/xfs_attr.c:1413 xfs_attr_remove_args+0xb1/0x10d fs/xfs/libxfs/xfs_attr.c:684 xfs_attr_set+0xf1e/0x12a7 fs/xfs/libxfs/xfs_attr.c:802 xfs_xattr_set+0xeb/0x1a9 fs/xfs/xfs_xattr.c:59 __vfs_removexattr+0x106/0x16a fs/xattr.c:468 cap_inode_killpriv+0x24/0x47 security/commoncap.c:324 security_inode_killpriv+0x54/0xa1 security/security.c:1414 setattr_prepare+0x1a6/0x897 fs/attr.c:146 xfs_vn_change_ok+0x111/0x15e fs/xfs/xfs_iops.c:682 xfs_vn_setattr_size+0x5f/0x15a fs/xfs/xfs_iops.c:1065 xfs_vn_setattr+0x125/0x2ad fs/xfs/xfs_iops.c:1093 notify_change+0xae5/0x10a1 fs/attr.c:410 do_truncate+0x134/0x1e0 fs/open.c:64 handle_truncate fs/namei.c:3084 [inline] do_open fs/namei.c:3432 [inline] path_openat+0x30ab/0x396d fs/namei.c:3561 do_filp_open+0x1c4/0x290 fs/namei.c:3588 do_sys_openat2+0x60d/0x98c fs/open.c:1212 do_sys_open+0xcf/0x13c fs/open.c:1228 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0x0 The buggy address belongs to the object at ffff88802cec9188 which belongs to the cache xfs_ifork of size 40 The buggy address is located 20 bytes inside of 40-byte region [ffff88802cec9188, ffff88802cec91b0) The buggy address belongs to the page: page:00000000c3af36a1 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2cec9 flags: 0xfffffc0000200(slab|node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0000200 ffffea00009d2580 0000000600000006 ffff88801a9ffc80 raw: 0000000000000000 0000000080490049 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88802cec9080: fb fb fb fc fc fa fb fb fb fb fc fc fb fb fb fb ffff88802cec9100: fb fc fc fb fb fb fb fb fc fc fb fb fb fb fb fc >ffff88802cec9180: fc fa fb fb fb fb fc fc fa fb fb fb fb fc fc fb ^ ffff88802cec9200: fb fb fb fb fc fc fb fb fb fb fb fc fc fb fb fb ffff88802cec9280: fb fb fc fc fa fb fb fb fb fc fc fa fb fb fb fb ================================================================== The root cause of this bug is the unlocked access to xfs_inode.i_afp from the getxattr code paths while trying to determine which ILOCK mode to use to stabilize the xattr data. Unfortunately, the VFS does not acquire i_rwsem when vfs_getxattr (or listxattr) call into the filesystem, which means that getxattr can race with a removexattr that's tearing down the attr fork and crash: xfs_attr_set: xfs_attr_get: xfs_attr_fork_remove: xfs_ilock_attr_map_shared: xfs_idestroy_fork(ip->i_afp); kmem_cache_free(xfs_ifork_cache, ip->i_afp); if (ip->i_afp && ip->i_afp = NULL; xfs_need_iread_extents(ip->i_afp)) <KABOOM> ip->i_forkoff = 0; Regrettably, the VFS is much more lax about i_rwsem and getxattr than is immediately obvious -- not only does it not guarantee that we hold i_rwsem, it actually doesn't guarantee that we *don't* hold it either. The getxattr system call won't acquire the lock before calling XFS, but the file capabilities code calls getxattr with and without i_rwsem held to determine if the "security.capabilities" xattr is set on the file. Fixing the VFS locking requires a treewide investigation into every code path that could touch an xattr and what i_rwsem state it expects or sets up. That could take years or even prove impossible; fortunately, we can fix this UAF problem inside XFS. An earlier version of this patch used smp_wmb in xfs_attr_fork_remove to ensure that i_forkoff is always zeroed before i_afp is set to null and changed the read paths to use smp_rmb before accessing i_forkoff and i_afp, which avoided these UAF problems. However, the patch author was too busy dealing with other problems in the meantime, and by the time he came back to this issue, the situation had changed a bit. On a modern system with selinux, each inode will always have at least one xattr for the selinux label, so it doesn't make much sense to keep incurring the extra pointer dereference. Furthermore, Allison's upcoming parent pointer patchset will also cause nearly every inode in the filesystem to have extended attributes. Therefore, make the inode attribute fork structure part of struct xfs_inode, at a cost of 40 more bytes. This patch adds a clunky if_present field where necessary to maintain the existing logic of xattr fork null pointer testing in the existing codebase. The next patch switches the logic over to XFS_IFORK_Q and it all goes away. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2022-07-09 17:56:06 +00:00
return NULL;
return &ip->i_af;
case XFS_COW_FORK:
return ip->i_cowfp;
default:
ASSERT(0);
return NULL;
}
}
static inline unsigned int xfs_inode_fork_boff(struct xfs_inode *ip)
{
return ip->i_forkoff << 3;
}
static inline unsigned int xfs_inode_data_fork_size(struct xfs_inode *ip)
{
if (xfs_inode_has_attr_fork(ip))
return xfs_inode_fork_boff(ip);
return XFS_LITINO(ip->i_mount);
}
static inline unsigned int xfs_inode_attr_fork_size(struct xfs_inode *ip)
{
if (xfs_inode_has_attr_fork(ip))
return XFS_LITINO(ip->i_mount) - xfs_inode_fork_boff(ip);
return 0;
}
static inline unsigned int
xfs_inode_fork_size(
struct xfs_inode *ip,
int whichfork)
{
switch (whichfork) {
case XFS_DATA_FORK:
return xfs_inode_data_fork_size(ip);
case XFS_ATTR_FORK:
return xfs_inode_attr_fork_size(ip);
default:
return 0;
}
}
/* Convert from vfs inode to xfs inode */
static inline struct xfs_inode *XFS_I(struct inode *inode)
{
return container_of(inode, struct xfs_inode, i_vnode);
}
/* convert from xfs inode to vfs inode */
static inline struct inode *VFS_I(struct xfs_inode *ip)
{
return &ip->i_vnode;
}
/*
* For regular files we only update the on-disk filesize when actually
* writing data back to disk. Until then only the copy in the VFS inode
* is uptodate.
*/
static inline xfs_fsize_t XFS_ISIZE(struct xfs_inode *ip)
{
if (S_ISREG(VFS_I(ip)->i_mode))
return i_size_read(VFS_I(ip));
return ip->i_disk_size;
}
/*
* If this I/O goes past the on-disk inode size update it unless it would
* be past the current in-core inode size.
*/
static inline xfs_fsize_t
xfs_new_eof(struct xfs_inode *ip, xfs_fsize_t new_size)
{
xfs_fsize_t i_size = i_size_read(VFS_I(ip));
2014-10-01 23:21:53 +00:00
if (new_size > i_size || new_size < 0)
new_size = i_size;
return new_size > ip->i_disk_size ? new_size : 0;
}
/*
* i_flags helper functions
*/
static inline void
__xfs_iflags_set(xfs_inode_t *ip, unsigned short flags)
{
ip->i_flags |= flags;
}
static inline void
xfs_iflags_set(xfs_inode_t *ip, unsigned short flags)
{
spin_lock(&ip->i_flags_lock);
__xfs_iflags_set(ip, flags);
spin_unlock(&ip->i_flags_lock);
}
static inline void
xfs_iflags_clear(xfs_inode_t *ip, unsigned short flags)
{
spin_lock(&ip->i_flags_lock);
ip->i_flags &= ~flags;
spin_unlock(&ip->i_flags_lock);
}
static inline int
__xfs_iflags_test(xfs_inode_t *ip, unsigned short flags)
{
return (ip->i_flags & flags);
}
static inline int
xfs_iflags_test(xfs_inode_t *ip, unsigned short flags)
{
int ret;
spin_lock(&ip->i_flags_lock);
ret = __xfs_iflags_test(ip, flags);
spin_unlock(&ip->i_flags_lock);
return ret;
}
static inline int
xfs_iflags_test_and_clear(xfs_inode_t *ip, unsigned short flags)
{
int ret;
spin_lock(&ip->i_flags_lock);
ret = ip->i_flags & flags;
if (ret)
ip->i_flags &= ~flags;
spin_unlock(&ip->i_flags_lock);
return ret;
}
static inline int
xfs_iflags_test_and_set(xfs_inode_t *ip, unsigned short flags)
{
int ret;
spin_lock(&ip->i_flags_lock);
ret = ip->i_flags & flags;
if (!ret)
ip->i_flags |= flags;
spin_unlock(&ip->i_flags_lock);
return ret;
}
static inline prid_t
xfs_get_initial_prid(struct xfs_inode *dp)
{
if (dp->i_diflags & XFS_DIFLAG_PROJINHERIT)
return dp->i_projid;
return XFS_PROJID_DEFAULT;
}
static inline bool xfs_is_reflink_inode(struct xfs_inode *ip)
{
return ip->i_diflags2 & XFS_DIFLAG2_REFLINK;
}
static inline bool xfs_is_metadata_inode(struct xfs_inode *ip)
{
struct xfs_mount *mp = ip->i_mount;
return ip == mp->m_rbmip || ip == mp->m_rsumip ||
xfs_is_quota_inode(&mp->m_sb, ip->i_ino);
}
/*
* Check if an inode has any data in the COW fork. This might be often false
* even for inodes with the reflink flag when there is no pending COW operation.
*/
static inline bool xfs_inode_has_cow_data(struct xfs_inode *ip)
{
return ip->i_cowfp && ip->i_cowfp->if_bytes;
}
static inline bool xfs_inode_has_bigtime(struct xfs_inode *ip)
{
return ip->i_diflags2 & XFS_DIFLAG2_BIGTIME;
}
static inline bool xfs_inode_has_large_extent_counts(struct xfs_inode *ip)
{
return ip->i_diflags2 & XFS_DIFLAG2_NREXT64;
}
/*
* Return the buftarg used for data allocations on a given inode.
*/
#define xfs_inode_buftarg(ip) \
(XFS_IS_REALTIME_INODE(ip) ? \
(ip)->i_mount->m_rtdev_targp : (ip)->i_mount->m_ddev_targp)
/*
* In-core inode flags.
*/
#define XFS_IRECLAIM (1 << 0) /* started reclaiming this inode */
#define XFS_ISTALE (1 << 1) /* inode has been staled */
#define XFS_IRECLAIMABLE (1 << 2) /* inode can be reclaimed */
#define XFS_INEW (1 << 3) /* inode has just been allocated */
#define XFS_IPRESERVE_DM_FIELDS (1 << 4) /* has legacy DMAPI fields set */
#define XFS_ITRUNCATED (1 << 5) /* truncated down so flush-on-close */
#define XFS_IDIRTY_RELEASE (1 << 6) /* dirty release already seen */
#define XFS_IFLUSHING (1 << 7) /* inode is being flushed */
#define __XFS_IPINNED_BIT 8 /* wakeup key for zero pin count */
#define XFS_IPINNED (1 << __XFS_IPINNED_BIT)
#define XFS_IEOFBLOCKS (1 << 9) /* has the preallocblocks tag set */
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
#define XFS_NEED_INACTIVE (1 << 10) /* see XFS_INACTIVATING below */
/*
* If this unlinked inode is in the middle of recovery, don't let drop_inode
* truncate and free the inode. This can happen if we iget the inode during
* log recovery to replay a bmap operation on the inode.
*/
#define XFS_IRECOVERY (1 << 11)
#define XFS_ICOWBLOCKS (1 << 12)/* has the cowblocks tag set */
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
/*
* If we need to update on-disk metadata before this IRECLAIMABLE inode can be
* freed, then NEED_INACTIVE will be set. Once we start the updates, the
* INACTIVATING bit will be set to keep iget away from this inode. After the
* inactivation completes, both flags will be cleared and the inode is a
* plain old IRECLAIMABLE inode.
*/
#define XFS_INACTIVATING (1 << 13)
/* All inode state flags related to inode reclaim. */
#define XFS_ALL_IRECLAIM_FLAGS (XFS_IRECLAIMABLE | \
XFS_IRECLAIM | \
XFS_NEED_INACTIVE | \
XFS_INACTIVATING)
/*
* Per-lifetime flags need to be reset when re-using a reclaimable inode during
* inode lookup. This prevents unintended behaviour on the new inode from
* ocurring.
*/
#define XFS_IRECLAIM_RESET_FLAGS \
(XFS_IRECLAIMABLE | XFS_IRECLAIM | \
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
XFS_IDIRTY_RELEASE | XFS_ITRUNCATED | XFS_NEED_INACTIVE | \
XFS_INACTIVATING)
/*
* Flags for inode locking.
* Bit ranges: 1<<1 - 1<<16-1 -- iolock/ilock modes (bitfield)
* 1<<16 - 1<<32-1 -- lockdep annotation (integers)
*/
#define XFS_IOLOCK_EXCL (1u << 0)
#define XFS_IOLOCK_SHARED (1u << 1)
#define XFS_ILOCK_EXCL (1u << 2)
#define XFS_ILOCK_SHARED (1u << 3)
#define XFS_MMAPLOCK_EXCL (1u << 4)
#define XFS_MMAPLOCK_SHARED (1u << 5)
#define XFS_LOCK_MASK (XFS_IOLOCK_EXCL | XFS_IOLOCK_SHARED \
| XFS_ILOCK_EXCL | XFS_ILOCK_SHARED \
| XFS_MMAPLOCK_EXCL | XFS_MMAPLOCK_SHARED)
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14 23:14:59 +00:00
#define XFS_LOCK_FLAGS \
{ XFS_IOLOCK_EXCL, "IOLOCK_EXCL" }, \
{ XFS_IOLOCK_SHARED, "IOLOCK_SHARED" }, \
{ XFS_ILOCK_EXCL, "ILOCK_EXCL" }, \
{ XFS_ILOCK_SHARED, "ILOCK_SHARED" }, \
{ XFS_MMAPLOCK_EXCL, "MMAPLOCK_EXCL" }, \
{ XFS_MMAPLOCK_SHARED, "MMAPLOCK_SHARED" }
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14 23:14:59 +00:00
/*
* Flags for lockdep annotations.
*
* XFS_LOCK_PARENT - for directory operations that require locking a
xfs: clean up inode lockdep annotations Lockdep annotations are a maintenance nightmare. Locking has to be modified to suit the limitations of the annotations, and we're always having to fix the annotations because they are unable to express the complexity of locking heirarchies correctly. So, next up, we've got more issues with lockdep annotations for inode locking w.r.t. XFS_LOCK_PARENT: - lockdep classes are exclusive and can't be ORed together to form new classes. - IOLOCK needs multiple PARENT subclasses to express the changes needed for the readdir locking rework needed to stop the endless flow of lockdep false positives involving readdir calling filldir under the ILOCK. - there are only 8 unique lockdep subclasses available, so we can't create a generic solution. IOWs we need to treat the 3-bit space available to each lock type differently: - IOLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 IOLOCK subclasses - at least 2 IOLOCK_PARENT subclasses - MMAPLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 MMAPLOCK subclasses - ILOCK uses xfs_lock_inodes with up to 5 inodes, so needs: - at least 5 ILOCK subclasses - one ILOCK_PARENT subclass - one RTBITMAP subclass - one RTSUM subclass For the IOLOCK, split the space into two sets of subclasses. For the MMAPLOCK, just use half the space for the one subclass to match the non-parent lock classes of the IOLOCK. For the ILOCK, use 0-4 as the ILOCK subclasses, 5-7 for the remaining individual subclasses. Because they are now all different, modify xfs_lock_inumorder() to handle the nested subclasses, and to assert fail if passed an invalid subclass. Further, annotate xfs_lock_inodes() to assert fail if an invalid combination of lock primitives and inode counts are passed that would result in a lockdep subclass annotation overflow. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 00:32:49 +00:00
* parent directory inode and a child entry inode. IOLOCK requires nesting,
* MMAPLOCK does not support this class, ILOCK requires a single subclass
* to differentiate parent from child.
*
* XFS_LOCK_RTBITMAP/XFS_LOCK_RTSUM - the realtime device bitmap and summary
* inodes do not participate in the normal lock order, and thus have their
* own subclasses.
*
* XFS_LOCK_INUMORDER - for locking several inodes at the some time
* with xfs_lock_inodes(). This flag is used as the starting subclass
* and each subsequent lock acquired will increment the subclass by one.
xfs: clean up inode lockdep annotations Lockdep annotations are a maintenance nightmare. Locking has to be modified to suit the limitations of the annotations, and we're always having to fix the annotations because they are unable to express the complexity of locking heirarchies correctly. So, next up, we've got more issues with lockdep annotations for inode locking w.r.t. XFS_LOCK_PARENT: - lockdep classes are exclusive and can't be ORed together to form new classes. - IOLOCK needs multiple PARENT subclasses to express the changes needed for the readdir locking rework needed to stop the endless flow of lockdep false positives involving readdir calling filldir under the ILOCK. - there are only 8 unique lockdep subclasses available, so we can't create a generic solution. IOWs we need to treat the 3-bit space available to each lock type differently: - IOLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 IOLOCK subclasses - at least 2 IOLOCK_PARENT subclasses - MMAPLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 MMAPLOCK subclasses - ILOCK uses xfs_lock_inodes with up to 5 inodes, so needs: - at least 5 ILOCK subclasses - one ILOCK_PARENT subclass - one RTBITMAP subclass - one RTSUM subclass For the IOLOCK, split the space into two sets of subclasses. For the MMAPLOCK, just use half the space for the one subclass to match the non-parent lock classes of the IOLOCK. For the ILOCK, use 0-4 as the ILOCK subclasses, 5-7 for the remaining individual subclasses. Because they are now all different, modify xfs_lock_inumorder() to handle the nested subclasses, and to assert fail if passed an invalid subclass. Further, annotate xfs_lock_inodes() to assert fail if an invalid combination of lock primitives and inode counts are passed that would result in a lockdep subclass annotation overflow. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 00:32:49 +00:00
* However, MAX_LOCKDEP_SUBCLASSES == 8, which means we are greatly
* limited to the subclasses we can represent via nesting. We need at least
* 5 inodes nest depth for the ILOCK through rename, and we also have to support
* XFS_ILOCK_PARENT, which gives 6 subclasses. Then we have XFS_ILOCK_RTBITMAP
* and XFS_ILOCK_RTSUM, which are another 2 unique subclasses, so that's all
* 8 subclasses supported by lockdep.
*
* This also means we have to number the sub-classes in the lowest bits of
* the mask we keep, and we have to ensure we never exceed 3 bits of lockdep
* mask and we can't use bit-masking to build the subclasses. What a mess.
*
* Bit layout:
*
* Bit Lock Region
* 16-19 XFS_IOLOCK_SHIFT dependencies
* 20-23 XFS_MMAPLOCK_SHIFT dependencies
* 24-31 XFS_ILOCK_SHIFT dependencies
*
* IOLOCK values
*
* 0-3 subclass value
* 4-7 unused
xfs: clean up inode lockdep annotations Lockdep annotations are a maintenance nightmare. Locking has to be modified to suit the limitations of the annotations, and we're always having to fix the annotations because they are unable to express the complexity of locking heirarchies correctly. So, next up, we've got more issues with lockdep annotations for inode locking w.r.t. XFS_LOCK_PARENT: - lockdep classes are exclusive and can't be ORed together to form new classes. - IOLOCK needs multiple PARENT subclasses to express the changes needed for the readdir locking rework needed to stop the endless flow of lockdep false positives involving readdir calling filldir under the ILOCK. - there are only 8 unique lockdep subclasses available, so we can't create a generic solution. IOWs we need to treat the 3-bit space available to each lock type differently: - IOLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 IOLOCK subclasses - at least 2 IOLOCK_PARENT subclasses - MMAPLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 MMAPLOCK subclasses - ILOCK uses xfs_lock_inodes with up to 5 inodes, so needs: - at least 5 ILOCK subclasses - one ILOCK_PARENT subclass - one RTBITMAP subclass - one RTSUM subclass For the IOLOCK, split the space into two sets of subclasses. For the MMAPLOCK, just use half the space for the one subclass to match the non-parent lock classes of the IOLOCK. For the ILOCK, use 0-4 as the ILOCK subclasses, 5-7 for the remaining individual subclasses. Because they are now all different, modify xfs_lock_inumorder() to handle the nested subclasses, and to assert fail if passed an invalid subclass. Further, annotate xfs_lock_inodes() to assert fail if an invalid combination of lock primitives and inode counts are passed that would result in a lockdep subclass annotation overflow. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 00:32:49 +00:00
*
* MMAPLOCK values
*
* 0-3 subclass value
* 4-7 unused
*
* ILOCK values
* 0-4 subclass values
* 5 PARENT subclass (not nestable)
* 6 RTBITMAP subclass (not nestable)
* 7 RTSUM subclass (not nestable)
*
*/
xfs: clean up inode lockdep annotations Lockdep annotations are a maintenance nightmare. Locking has to be modified to suit the limitations of the annotations, and we're always having to fix the annotations because they are unable to express the complexity of locking heirarchies correctly. So, next up, we've got more issues with lockdep annotations for inode locking w.r.t. XFS_LOCK_PARENT: - lockdep classes are exclusive and can't be ORed together to form new classes. - IOLOCK needs multiple PARENT subclasses to express the changes needed for the readdir locking rework needed to stop the endless flow of lockdep false positives involving readdir calling filldir under the ILOCK. - there are only 8 unique lockdep subclasses available, so we can't create a generic solution. IOWs we need to treat the 3-bit space available to each lock type differently: - IOLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 IOLOCK subclasses - at least 2 IOLOCK_PARENT subclasses - MMAPLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 MMAPLOCK subclasses - ILOCK uses xfs_lock_inodes with up to 5 inodes, so needs: - at least 5 ILOCK subclasses - one ILOCK_PARENT subclass - one RTBITMAP subclass - one RTSUM subclass For the IOLOCK, split the space into two sets of subclasses. For the MMAPLOCK, just use half the space for the one subclass to match the non-parent lock classes of the IOLOCK. For the ILOCK, use 0-4 as the ILOCK subclasses, 5-7 for the remaining individual subclasses. Because they are now all different, modify xfs_lock_inumorder() to handle the nested subclasses, and to assert fail if passed an invalid subclass. Further, annotate xfs_lock_inodes() to assert fail if an invalid combination of lock primitives and inode counts are passed that would result in a lockdep subclass annotation overflow. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 00:32:49 +00:00
#define XFS_IOLOCK_SHIFT 16
#define XFS_IOLOCK_MAX_SUBCLASS 3
#define XFS_IOLOCK_DEP_MASK 0x000f0000u
xfs: clean up inode lockdep annotations Lockdep annotations are a maintenance nightmare. Locking has to be modified to suit the limitations of the annotations, and we're always having to fix the annotations because they are unable to express the complexity of locking heirarchies correctly. So, next up, we've got more issues with lockdep annotations for inode locking w.r.t. XFS_LOCK_PARENT: - lockdep classes are exclusive and can't be ORed together to form new classes. - IOLOCK needs multiple PARENT subclasses to express the changes needed for the readdir locking rework needed to stop the endless flow of lockdep false positives involving readdir calling filldir under the ILOCK. - there are only 8 unique lockdep subclasses available, so we can't create a generic solution. IOWs we need to treat the 3-bit space available to each lock type differently: - IOLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 IOLOCK subclasses - at least 2 IOLOCK_PARENT subclasses - MMAPLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 MMAPLOCK subclasses - ILOCK uses xfs_lock_inodes with up to 5 inodes, so needs: - at least 5 ILOCK subclasses - one ILOCK_PARENT subclass - one RTBITMAP subclass - one RTSUM subclass For the IOLOCK, split the space into two sets of subclasses. For the MMAPLOCK, just use half the space for the one subclass to match the non-parent lock classes of the IOLOCK. For the ILOCK, use 0-4 as the ILOCK subclasses, 5-7 for the remaining individual subclasses. Because they are now all different, modify xfs_lock_inumorder() to handle the nested subclasses, and to assert fail if passed an invalid subclass. Further, annotate xfs_lock_inodes() to assert fail if an invalid combination of lock primitives and inode counts are passed that would result in a lockdep subclass annotation overflow. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 00:32:49 +00:00
#define XFS_MMAPLOCK_SHIFT 20
#define XFS_MMAPLOCK_NUMORDER 0
#define XFS_MMAPLOCK_MAX_SUBCLASS 3
#define XFS_MMAPLOCK_DEP_MASK 0x00f00000u
xfs: clean up inode lockdep annotations Lockdep annotations are a maintenance nightmare. Locking has to be modified to suit the limitations of the annotations, and we're always having to fix the annotations because they are unable to express the complexity of locking heirarchies correctly. So, next up, we've got more issues with lockdep annotations for inode locking w.r.t. XFS_LOCK_PARENT: - lockdep classes are exclusive and can't be ORed together to form new classes. - IOLOCK needs multiple PARENT subclasses to express the changes needed for the readdir locking rework needed to stop the endless flow of lockdep false positives involving readdir calling filldir under the ILOCK. - there are only 8 unique lockdep subclasses available, so we can't create a generic solution. IOWs we need to treat the 3-bit space available to each lock type differently: - IOLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 IOLOCK subclasses - at least 2 IOLOCK_PARENT subclasses - MMAPLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 MMAPLOCK subclasses - ILOCK uses xfs_lock_inodes with up to 5 inodes, so needs: - at least 5 ILOCK subclasses - one ILOCK_PARENT subclass - one RTBITMAP subclass - one RTSUM subclass For the IOLOCK, split the space into two sets of subclasses. For the MMAPLOCK, just use half the space for the one subclass to match the non-parent lock classes of the IOLOCK. For the ILOCK, use 0-4 as the ILOCK subclasses, 5-7 for the remaining individual subclasses. Because they are now all different, modify xfs_lock_inumorder() to handle the nested subclasses, and to assert fail if passed an invalid subclass. Further, annotate xfs_lock_inodes() to assert fail if an invalid combination of lock primitives and inode counts are passed that would result in a lockdep subclass annotation overflow. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 00:32:49 +00:00
#define XFS_ILOCK_SHIFT 24
#define XFS_ILOCK_PARENT_VAL 5u
xfs: clean up inode lockdep annotations Lockdep annotations are a maintenance nightmare. Locking has to be modified to suit the limitations of the annotations, and we're always having to fix the annotations because they are unable to express the complexity of locking heirarchies correctly. So, next up, we've got more issues with lockdep annotations for inode locking w.r.t. XFS_LOCK_PARENT: - lockdep classes are exclusive and can't be ORed together to form new classes. - IOLOCK needs multiple PARENT subclasses to express the changes needed for the readdir locking rework needed to stop the endless flow of lockdep false positives involving readdir calling filldir under the ILOCK. - there are only 8 unique lockdep subclasses available, so we can't create a generic solution. IOWs we need to treat the 3-bit space available to each lock type differently: - IOLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 IOLOCK subclasses - at least 2 IOLOCK_PARENT subclasses - MMAPLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 MMAPLOCK subclasses - ILOCK uses xfs_lock_inodes with up to 5 inodes, so needs: - at least 5 ILOCK subclasses - one ILOCK_PARENT subclass - one RTBITMAP subclass - one RTSUM subclass For the IOLOCK, split the space into two sets of subclasses. For the MMAPLOCK, just use half the space for the one subclass to match the non-parent lock classes of the IOLOCK. For the ILOCK, use 0-4 as the ILOCK subclasses, 5-7 for the remaining individual subclasses. Because they are now all different, modify xfs_lock_inumorder() to handle the nested subclasses, and to assert fail if passed an invalid subclass. Further, annotate xfs_lock_inodes() to assert fail if an invalid combination of lock primitives and inode counts are passed that would result in a lockdep subclass annotation overflow. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 00:32:49 +00:00
#define XFS_ILOCK_MAX_SUBCLASS (XFS_ILOCK_PARENT_VAL - 1)
#define XFS_ILOCK_RTBITMAP_VAL 6u
#define XFS_ILOCK_RTSUM_VAL 7u
#define XFS_ILOCK_DEP_MASK 0xff000000u
xfs: clean up inode lockdep annotations Lockdep annotations are a maintenance nightmare. Locking has to be modified to suit the limitations of the annotations, and we're always having to fix the annotations because they are unable to express the complexity of locking heirarchies correctly. So, next up, we've got more issues with lockdep annotations for inode locking w.r.t. XFS_LOCK_PARENT: - lockdep classes are exclusive and can't be ORed together to form new classes. - IOLOCK needs multiple PARENT subclasses to express the changes needed for the readdir locking rework needed to stop the endless flow of lockdep false positives involving readdir calling filldir under the ILOCK. - there are only 8 unique lockdep subclasses available, so we can't create a generic solution. IOWs we need to treat the 3-bit space available to each lock type differently: - IOLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 IOLOCK subclasses - at least 2 IOLOCK_PARENT subclasses - MMAPLOCK uses xfs_lock_two_inodes(), so needs: - at least 2 MMAPLOCK subclasses - ILOCK uses xfs_lock_inodes with up to 5 inodes, so needs: - at least 5 ILOCK subclasses - one ILOCK_PARENT subclass - one RTBITMAP subclass - one RTSUM subclass For the IOLOCK, split the space into two sets of subclasses. For the MMAPLOCK, just use half the space for the one subclass to match the non-parent lock classes of the IOLOCK. For the ILOCK, use 0-4 as the ILOCK subclasses, 5-7 for the remaining individual subclasses. Because they are now all different, modify xfs_lock_inumorder() to handle the nested subclasses, and to assert fail if passed an invalid subclass. Further, annotate xfs_lock_inodes() to assert fail if an invalid combination of lock primitives and inode counts are passed that would result in a lockdep subclass annotation overflow. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 00:32:49 +00:00
#define XFS_ILOCK_PARENT (XFS_ILOCK_PARENT_VAL << XFS_ILOCK_SHIFT)
#define XFS_ILOCK_RTBITMAP (XFS_ILOCK_RTBITMAP_VAL << XFS_ILOCK_SHIFT)
#define XFS_ILOCK_RTSUM (XFS_ILOCK_RTSUM_VAL << XFS_ILOCK_SHIFT)
#define XFS_LOCK_SUBCLASS_MASK (XFS_IOLOCK_DEP_MASK | \
XFS_MMAPLOCK_DEP_MASK | \
XFS_ILOCK_DEP_MASK)
#define XFS_IOLOCK_DEP(flags) (((flags) & XFS_IOLOCK_DEP_MASK) \
>> XFS_IOLOCK_SHIFT)
#define XFS_MMAPLOCK_DEP(flags) (((flags) & XFS_MMAPLOCK_DEP_MASK) \
>> XFS_MMAPLOCK_SHIFT)
#define XFS_ILOCK_DEP(flags) (((flags) & XFS_ILOCK_DEP_MASK) \
>> XFS_ILOCK_SHIFT)
xfs: prepare xfs_break_layouts() for another layout type When xfs is operating as the back-end of a pNFS block server, it prevents collisions between local and remote operations by requiring a lease to be held for remotely accessed blocks. Local filesystem operations break those leases before writing or mutating the extent map of the file. A similar mechanism is needed to prevent operations on pinned dax mappings, like device-DMA, from colliding with extent unmap operations. BREAK_WRITE and BREAK_UNMAP are introduced as two distinct levels of layout breaking. Layouts are broken in the BREAK_WRITE case to ensure that layout-holders do not collide with local writes. Additionally, layouts are broken in the BREAK_UNMAP case to make sure the layout-holder has a consistent view of the file's extent map. While BREAK_WRITE breaks can be satisfied be recalling FL_LAYOUT leases, BREAK_UNMAP breaks additionally require waiting for busy dax-pages to go idle while holding XFS_MMAPLOCK_EXCL. After this refactoring xfs_break_layouts() becomes the entry point for coordinating both types of breaks. Finally, xfs_break_leased_layouts() becomes just the BREAK_WRITE handler. Note that the unlock tracking is needed in a follow on change. That will coordinate retrying either break handler until both successfully test for a lease break while maintaining the lock state. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Reported-by: Dave Chinner <david@fromorbit.com> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-20 21:42:38 +00:00
/*
* Layouts are broken in the BREAK_WRITE case to ensure that
* layout-holders do not collide with local writes. Additionally,
* layouts are broken in the BREAK_UNMAP case to make sure the
* layout-holder has a consistent view of the file's extent map. While
* BREAK_WRITE breaks can be satisfied by recalling FL_LAYOUT leases,
* BREAK_UNMAP breaks additionally require waiting for busy dax-pages to
* go idle.
*/
enum layout_break_reason {
BREAK_WRITE,
BREAK_UNMAP,
};
/*
* For multiple groups support: if S_ISGID bit is set in the parent
* directory, group of new file is set to that of the parent, and
* new subdirectory gets S_ISGID bit from parent.
*/
#define XFS_INHERIT_GID(pip) \
(xfs_has_grpid((pip)->i_mount) || (VFS_I(pip)->i_mode & S_ISGID))
int xfs_release(struct xfs_inode *ip);
xfs: collect errors from inodegc for unlinked inode recovery Unlinked list recovery requires errors removing the inode the from the unlinked list get fed back to the main recovery loop. Now that we offload the unlinking to the inodegc work, we don't get errors being fed back when we trip over a corruption that prevents the inode from being removed from the unlinked list. This means we never clear the corrupt unlinked list bucket, resulting in runtime operations eventually tripping over it and shutting down. Fix this by collecting inodegc worker errors and feed them back to the flush caller. This is largely best effort - the only context that really cares is log recovery, and it only flushes a single inode at a time so we don't need complex synchronised handling. Essentially the inodegc workers will capture the first error that occurs and the next flush will gather them and clear them. The flush itself will only report the first gathered error. In the cases where callers can return errors, propagate the collected inodegc flush error up the error handling chain. In the case of inode unlinked list recovery, there are several superfluous calls to flush queued unlinked inodes - xlog_recover_iunlink_bucket() guarantees that it has flushed the inodegc and collected errors before it returns. Hence nothing in the calling path needs to run a flush, even when an error is returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-06-05 04:48:15 +00:00
int xfs_inactive(struct xfs_inode *ip);
int xfs_lookup(struct xfs_inode *dp, const struct xfs_name *name,
struct xfs_inode **ipp, struct xfs_name *ci_name);
int xfs_create(struct mnt_idmap *idmap,
struct xfs_inode *dp, struct xfs_name *name,
xfs: initialise attr fork on inode create When we allocate a new inode, we often need to add an attribute to the inode as part of the create. This can happen as a result of needing to add default ACLs or security labels before the inode is made visible to userspace. This is highly inefficient right now. We do the create transaction to allocate the inode, then we do an "add attr fork" transaction to modify the just created empty inode to set the inode fork offset to allow attributes to be stored, then we go and do the attribute creation. This means 3 transactions instead of 1 to allocate an inode, and this greatly increases the load on the CIL commit code, resulting in excessive contention on the CIL spin locks and performance degradation: 18.99% [kernel] [k] __pv_queued_spin_lock_slowpath 3.57% [kernel] [k] do_raw_spin_lock 2.51% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock 2.48% [kernel] [k] memcpy 2.34% [kernel] [k] xfs_log_commit_cil The typical profile resulting from running fsmark on a selinux enabled filesytem is adds this overhead to the create path: - 15.30% xfs_init_security - 15.23% security_inode_init_security - 13.05% xfs_initxattrs - 12.94% xfs_attr_set - 6.75% xfs_bmap_add_attrfork - 5.51% xfs_trans_commit - 5.48% __xfs_trans_commit - 5.35% xfs_log_commit_cil - 3.86% _raw_spin_lock - do_raw_spin_lock __pv_queued_spin_lock_slowpath - 0.70% xfs_trans_alloc 0.52% xfs_trans_reserve - 5.41% xfs_attr_set_args - 5.39% xfs_attr_set_shortform.constprop.0 - 4.46% xfs_trans_commit - 4.46% __xfs_trans_commit - 4.33% xfs_log_commit_cil - 2.74% _raw_spin_lock - do_raw_spin_lock __pv_queued_spin_lock_slowpath 0.60% xfs_inode_item_format 0.90% xfs_attr_try_sf_addname - 1.99% selinux_inode_init_security - 1.02% security_sid_to_context_force - 1.00% security_sid_to_context_core - 0.92% sidtab_entry_to_string - 0.90% sidtab_sid2str_get 0.59% sidtab_sid2str_put.part.0 - 0.82% selinux_determine_inode_label - 0.77% security_transition_sid 0.70% security_compute_sid.part.0 And fsmark creation rate performance drops by ~25%. The key point to note here is that half the additional overhead comes from adding the attribute fork to the newly created inode. That's crazy, considering we can do this same thing at inode create time with a couple of lines of code and no extra overhead. So, if we know we are going to add an attribute immediately after creating the inode, let's just initialise the attribute fork inside the create transaction and chop that whole chunk of code out of the create fast path. This completely removes the performance drop caused by enabling SELinux, and the profile looks like: - 8.99% xfs_init_security - 9.00% security_inode_init_security - 6.43% xfs_initxattrs - 6.37% xfs_attr_set - 5.45% xfs_attr_set_args - 5.42% xfs_attr_set_shortform.constprop.0 - 4.51% xfs_trans_commit - 4.54% __xfs_trans_commit - 4.59% xfs_log_commit_cil - 2.67% _raw_spin_lock - 3.28% do_raw_spin_lock 3.08% __pv_queued_spin_lock_slowpath 0.66% xfs_inode_item_format - 0.90% xfs_attr_try_sf_addname - 0.60% xfs_trans_alloc - 2.35% selinux_inode_init_security - 1.25% security_sid_to_context_force - 1.21% security_sid_to_context_core - 1.19% sidtab_entry_to_string - 1.20% sidtab_sid2str_get - 0.86% sidtab_sid2str_put.part.0 - 0.62% _raw_spin_lock_irqsave - 0.77% do_raw_spin_lock __pv_queued_spin_lock_slowpath - 0.84% selinux_determine_inode_label - 0.83% security_transition_sid 0.86% security_compute_sid.part.0 Which indicates the XFS overhead of creating the selinux xattr has been halved. This doesn't fix the CIL lock contention problem, just means it's not a limiting factor for this workload. Lock contention in the security subsystems is going to be an issue soon, though... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> [djwong: fix compilation error when CONFIG_SECURITY=n] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
2021-03-22 16:52:03 +00:00
umode_t mode, dev_t rdev, bool need_xattr,
struct xfs_inode **ipp);
int xfs_create_tmpfile(struct mnt_idmap *idmap,
struct xfs_inode *dp, umode_t mode,
struct xfs_inode **ipp);
int xfs_remove(struct xfs_inode *dp, struct xfs_name *name,
struct xfs_inode *ip);
int xfs_link(struct xfs_inode *tdp, struct xfs_inode *sip,
struct xfs_name *target_name);
int xfs_rename(struct mnt_idmap *idmap,
struct xfs_inode *src_dp, struct xfs_name *src_name,
struct xfs_inode *src_ip, struct xfs_inode *target_dp,
struct xfs_name *target_name,
struct xfs_inode *target_ip, unsigned int flags);
void xfs_ilock(xfs_inode_t *, uint);
int xfs_ilock_nowait(xfs_inode_t *, uint);
void xfs_iunlock(xfs_inode_t *, uint);
void xfs_ilock_demote(xfs_inode_t *, uint);
bool xfs_isilocked(struct xfs_inode *, uint);
uint xfs_ilock_data_map_shared(struct xfs_inode *);
uint xfs_ilock_attr_map_shared(struct xfs_inode *);
uint xfs_ip2xflags(struct xfs_inode *);
int xfs_ifree(struct xfs_trans *, struct xfs_inode *);
int xfs_itruncate_extents_flags(struct xfs_trans **,
struct xfs_inode *, int, xfs_fsize_t, int);
void xfs_iext_realloc(xfs_inode_t *, int, int);
int xfs_log_force_inode(struct xfs_inode *ip);
void xfs_iunpin_wait(xfs_inode_t *);
#define xfs_ipincount(ip) ((unsigned int) atomic_read(&ip->i_pincount))
int xfs_iflush_cluster(struct xfs_buf *);
void xfs_lock_two_inodes(struct xfs_inode *ip0, uint ip0_mode,
struct xfs_inode *ip1, uint ip1_mode);
xfs_extlen_t xfs_get_extsz_hint(struct xfs_inode *ip);
xfs_extlen_t xfs_get_cowextsz_hint(struct xfs_inode *ip);
int xfs_init_new_inode(struct mnt_idmap *idmap, struct xfs_trans *tp,
struct xfs_inode *pip, xfs_ino_t ino, umode_t mode,
xfs_nlink_t nlink, dev_t rdev, prid_t prid, bool init_xattrs,
struct xfs_inode **ipp);
static inline int
xfs_itruncate_extents(
struct xfs_trans **tpp,
struct xfs_inode *ip,
int whichfork,
xfs_fsize_t new_size)
{
return xfs_itruncate_extents_flags(tpp, ip, whichfork, new_size, 0);
}
/* from xfs_file.c */
int xfs_break_dax_layouts(struct inode *inode, bool *retry);
xfs: prepare xfs_break_layouts() for another layout type When xfs is operating as the back-end of a pNFS block server, it prevents collisions between local and remote operations by requiring a lease to be held for remotely accessed blocks. Local filesystem operations break those leases before writing or mutating the extent map of the file. A similar mechanism is needed to prevent operations on pinned dax mappings, like device-DMA, from colliding with extent unmap operations. BREAK_WRITE and BREAK_UNMAP are introduced as two distinct levels of layout breaking. Layouts are broken in the BREAK_WRITE case to ensure that layout-holders do not collide with local writes. Additionally, layouts are broken in the BREAK_UNMAP case to make sure the layout-holder has a consistent view of the file's extent map. While BREAK_WRITE breaks can be satisfied be recalling FL_LAYOUT leases, BREAK_UNMAP breaks additionally require waiting for busy dax-pages to go idle while holding XFS_MMAPLOCK_EXCL. After this refactoring xfs_break_layouts() becomes the entry point for coordinating both types of breaks. Finally, xfs_break_leased_layouts() becomes just the BREAK_WRITE handler. Note that the unlock tracking is needed in a follow on change. That will coordinate retrying either break handler until both successfully test for a lease break while maintaining the lock state. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Reported-by: Dave Chinner <david@fromorbit.com> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-20 21:42:38 +00:00
int xfs_break_layouts(struct inode *inode, uint *iolock,
enum layout_break_reason reason);
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
/* from xfs_iops.c */
extern void xfs_setup_inode(struct xfs_inode *ip);
extern void xfs_setup_iops(struct xfs_inode *ip);
extern void xfs_diflags_to_iflags(struct xfs_inode *ip, bool init);
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
/*
* When setting up a newly allocated inode, we need to call
* xfs_finish_inode_setup() once the inode is fully instantiated at
* the VFS level to prevent the rest of the world seeing the inode
* before we've completed instantiation. Otherwise we can do it
* the moment the inode lookup is complete.
*/
static inline void xfs_finish_inode_setup(struct xfs_inode *ip)
{
xfs_iflags_clear(ip, XFS_INEW);
barrier();
unlock_new_inode(VFS_I(ip));
}
static inline void xfs_setup_existing_inode(struct xfs_inode *ip)
{
xfs_setup_inode(ip);
xfs_setup_iops(ip);
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
xfs_finish_inode_setup(ip);
}
void xfs_irele(struct xfs_inode *ip);
extern struct kmem_cache *xfs_inode_cache;
/* The default CoW extent size hint. */
#define XFS_DEFAULT_COWEXTSZ_HINT 32
bool xfs_inode_needs_inactive(struct xfs_inode *ip);
xfs: implement per-inode writeback completion queues When scheduling writeback of dirty file data in the page cache, XFS uses IO completion workqueue items to ensure that filesystem metadata only updates after the write completes successfully. This is essential for converting unwritten extents to real extents at the right time and performing COW remappings. Unfortunately, XFS queues each IO completion work item to an unbounded workqueue, which means that the kernel can spawn dozens of threads to try to handle the items quickly. These threads need to take the ILOCK to update file metadata, which results in heavy ILOCK contention if a large number of the work items target a single file, which is inefficient. Worse yet, the writeback completion threads get stuck waiting for the ILOCK while holding transaction reservations, which can use up all available log reservation space. When that happens, metadata updates to other parts of the filesystem grind to a halt, even if the filesystem could otherwise have handled it. Even worse, if one of the things grinding to a halt happens to be a thread in the middle of a defer-ops finish holding the same ILOCK and trying to obtain more log reservation having exhausted the permanent reservation, we now have an ABBA deadlock - writeback completion has a transaction reserved and wants the ILOCK, and someone else has the ILOCK and wants a transaction reservation. Therefore, we create a per-inode writeback io completion queue + work item. When writeback finishes, it can add the ioend to the per-inode queue and let the single worker item process that queue. This dramatically cuts down on the number of kworkers and ILOCK contention in the system, and seems to have eliminated an occasional deadlock I was seeing while running generic/476. Testing with a program that simulates a heavy random-write workload to a single file demonstrates that the number of kworkers drops from approximately 120 threads per file to 1, without dramatically changing write bandwidth or pagecache access latency. Note that we leave the xfs-conv workqueue's max_active alone because we still want to be able to run ioend processing for as many inodes as the system can handle. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-15 20:13:20 +00:00
void xfs_end_io(struct work_struct *work);
int xfs_ilock2_io_mmap(struct xfs_inode *ip1, struct xfs_inode *ip2);
void xfs_iunlock2_io_mmap(struct xfs_inode *ip1, struct xfs_inode *ip2);
#endif /* __XFS_INODE_H__ */