linux-stable/net/sunrpc/xprtrdma/xprt_rdma.h

606 lines
18 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
* Copyright (c) 2014-2017 Oracle. All rights reserved.
* Copyright (c) 2003-2007 Network Appliance, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the BSD-type
* license below:
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
*
* Neither the name of the Network Appliance, Inc. nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _LINUX_SUNRPC_XPRT_RDMA_H
#define _LINUX_SUNRPC_XPRT_RDMA_H
#include <linux/wait.h> /* wait_queue_head_t, etc */
#include <linux/spinlock.h> /* spinlock_t, etc */
#include <linux/atomic.h> /* atomic_t, etc */
#include <linux/kref.h> /* struct kref */
#include <linux/workqueue.h> /* struct work_struct */
#include <linux/llist.h>
#include <rdma/rdma_cm.h> /* RDMA connection api */
#include <rdma/ib_verbs.h> /* RDMA verbs api */
#include <linux/sunrpc/clnt.h> /* rpc_xprt */
#include <linux/sunrpc/rpc_rdma_cid.h> /* completion IDs */
#include <linux/sunrpc/rpc_rdma.h> /* RPC/RDMA protocol */
#include <linux/sunrpc/xprtrdma.h> /* xprt parameters */
#define RDMA_RESOLVE_TIMEOUT (5000) /* 5 seconds */
#define RDMA_CONNECT_RETRY_MAX (2) /* retries if no listener backlog */
#define RPCRDMA_BIND_TO (60U * HZ)
#define RPCRDMA_INIT_REEST_TO (5U * HZ)
#define RPCRDMA_MAX_REEST_TO (30U * HZ)
#define RPCRDMA_IDLE_DISC_TO (5U * 60 * HZ)
/*
* RDMA Endpoint -- connection endpoint details
*/
struct rpcrdma_mr;
struct rpcrdma_ep {
struct kref re_kref;
struct rdma_cm_id *re_id;
struct ib_pd *re_pd;
unsigned int re_max_rdma_segs;
unsigned int re_max_fr_depth;
struct rpcrdma_mr *re_write_pad_mr;
enum ib_mr_type re_mrtype;
struct completion re_done;
unsigned int re_send_count;
unsigned int re_send_batch;
unsigned int re_max_inline_send;
unsigned int re_max_inline_recv;
int re_async_rc;
int re_connect_status;
atomic_t re_receiving;
atomic_t re_force_disconnect;
struct ib_qp_init_attr re_attr;
wait_queue_head_t re_connect_wait;
struct rpc_xprt *re_xprt;
struct rpcrdma_connect_private
re_cm_private;
struct rdma_conn_param re_remote_cma;
int re_receive_count;
unsigned int re_max_requests; /* depends on device */
unsigned int re_inline_send; /* negotiated */
unsigned int re_inline_recv; /* negotiated */
atomic_t re_completion_ids;
char re_write_pad[XDR_UNIT];
};
/* Pre-allocate extra Work Requests for handling reverse-direction
* Receives and Sends. This is a fixed value because the Work Queues
* are allocated when the forward channel is set up, long before the
* backchannel is provisioned. This value is two times
* NFS4_DEF_CB_SLOT_TABLE_SIZE.
*/
#if defined(CONFIG_SUNRPC_BACKCHANNEL)
#define RPCRDMA_BACKWARD_WRS (32)
#else
#define RPCRDMA_BACKWARD_WRS (0)
#endif
/* Registered buffer -- registered kmalloc'd memory for RDMA SEND/RECV
*/
struct rpcrdma_regbuf {
struct ib_sge rg_iov;
struct ib_device *rg_device;
enum dma_data_direction rg_direction;
void *rg_data;
};
static inline u64 rdmab_addr(struct rpcrdma_regbuf *rb)
{
return rb->rg_iov.addr;
}
static inline u32 rdmab_length(struct rpcrdma_regbuf *rb)
{
return rb->rg_iov.length;
}
static inline u32 rdmab_lkey(struct rpcrdma_regbuf *rb)
{
return rb->rg_iov.lkey;
}
static inline struct ib_device *rdmab_device(struct rpcrdma_regbuf *rb)
{
return rb->rg_device;
}
static inline void *rdmab_data(const struct rpcrdma_regbuf *rb)
{
return rb->rg_data;
}
/* Do not use emergency memory reserves, and fail quickly if memory
* cannot be allocated easily. These flags may be used wherever there
* is robust logic to handle a failure to allocate.
*/
#define XPRTRDMA_GFP_FLAGS (__GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN)
xprtrdma: Limit number of RDMA segments in RPC-over-RDMA headers Send buffer space is shared between the RPC-over-RDMA header and an RPC message. A large RPC-over-RDMA header means less space is available for the associated RPC message, which then has to be moved via an RDMA Read or Write. As more segments are added to the chunk lists, the header increases in size. Typical modern hardware needs only a few segments to convey the maximum payload size, but some devices and registration modes may need a lot of segments to convey data payload. Sometimes so many are needed that the remaining space in the Send buffer is not enough for the RPC message. Sending such a message usually fails. To ensure a transport can always make forward progress, cap the number of RDMA segments that are allowed in chunk lists. This prevents less-capable devices and memory registrations from consuming a large portion of the Send buffer by reducing the maximum data payload that can be conveyed with such devices. For now I choose an arbitrary maximum of 8 RDMA segments. This allows a maximum size RPC-over-RDMA header to fit nicely in the current 1024 byte inline threshold with over 700 bytes remaining for an inline RPC message. The current maximum data payload of NFS READ or WRITE requests is one megabyte. To convey that payload on a client with 4KB pages, each chunk segment would need to handle 32 or more data pages. This is well within the capabilities of FMR. For physical registration, the maximum payload size on platforms with 4KB pages is reduced to 32KB. For FRWR, a device's maximum page list depth would need to be at least 34 to support the maximum 1MB payload. A device with a smaller maximum page list depth means the maximum data payload is reduced when using that device. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-02 18:40:56 +00:00
/* To ensure a transport can always make forward progress,
* the number of RDMA segments allowed in header chunk lists
* is capped at 16. This prevents less-capable devices from
* overrunning the Send buffer while building chunk lists.
xprtrdma: Limit number of RDMA segments in RPC-over-RDMA headers Send buffer space is shared between the RPC-over-RDMA header and an RPC message. A large RPC-over-RDMA header means less space is available for the associated RPC message, which then has to be moved via an RDMA Read or Write. As more segments are added to the chunk lists, the header increases in size. Typical modern hardware needs only a few segments to convey the maximum payload size, but some devices and registration modes may need a lot of segments to convey data payload. Sometimes so many are needed that the remaining space in the Send buffer is not enough for the RPC message. Sending such a message usually fails. To ensure a transport can always make forward progress, cap the number of RDMA segments that are allowed in chunk lists. This prevents less-capable devices and memory registrations from consuming a large portion of the Send buffer by reducing the maximum data payload that can be conveyed with such devices. For now I choose an arbitrary maximum of 8 RDMA segments. This allows a maximum size RPC-over-RDMA header to fit nicely in the current 1024 byte inline threshold with over 700 bytes remaining for an inline RPC message. The current maximum data payload of NFS READ or WRITE requests is one megabyte. To convey that payload on a client with 4KB pages, each chunk segment would need to handle 32 or more data pages. This is well within the capabilities of FMR. For physical registration, the maximum payload size on platforms with 4KB pages is reduced to 32KB. For FRWR, a device's maximum page list depth would need to be at least 34 to support the maximum 1MB payload. A device with a smaller maximum page list depth means the maximum data payload is reduced when using that device. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-02 18:40:56 +00:00
*
* Elements of the Read list take up more room than the
* Write list or Reply chunk. 16 read segments means the
* chunk lists cannot consume more than
xprtrdma: Limit number of RDMA segments in RPC-over-RDMA headers Send buffer space is shared between the RPC-over-RDMA header and an RPC message. A large RPC-over-RDMA header means less space is available for the associated RPC message, which then has to be moved via an RDMA Read or Write. As more segments are added to the chunk lists, the header increases in size. Typical modern hardware needs only a few segments to convey the maximum payload size, but some devices and registration modes may need a lot of segments to convey data payload. Sometimes so many are needed that the remaining space in the Send buffer is not enough for the RPC message. Sending such a message usually fails. To ensure a transport can always make forward progress, cap the number of RDMA segments that are allowed in chunk lists. This prevents less-capable devices and memory registrations from consuming a large portion of the Send buffer by reducing the maximum data payload that can be conveyed with such devices. For now I choose an arbitrary maximum of 8 RDMA segments. This allows a maximum size RPC-over-RDMA header to fit nicely in the current 1024 byte inline threshold with over 700 bytes remaining for an inline RPC message. The current maximum data payload of NFS READ or WRITE requests is one megabyte. To convey that payload on a client with 4KB pages, each chunk segment would need to handle 32 or more data pages. This is well within the capabilities of FMR. For physical registration, the maximum payload size on platforms with 4KB pages is reduced to 32KB. For FRWR, a device's maximum page list depth would need to be at least 34 to support the maximum 1MB payload. A device with a smaller maximum page list depth means the maximum data payload is reduced when using that device. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-02 18:40:56 +00:00
*
* ((16 + 2) * read segment size) + 1 XDR words,
xprtrdma: Limit number of RDMA segments in RPC-over-RDMA headers Send buffer space is shared between the RPC-over-RDMA header and an RPC message. A large RPC-over-RDMA header means less space is available for the associated RPC message, which then has to be moved via an RDMA Read or Write. As more segments are added to the chunk lists, the header increases in size. Typical modern hardware needs only a few segments to convey the maximum payload size, but some devices and registration modes may need a lot of segments to convey data payload. Sometimes so many are needed that the remaining space in the Send buffer is not enough for the RPC message. Sending such a message usually fails. To ensure a transport can always make forward progress, cap the number of RDMA segments that are allowed in chunk lists. This prevents less-capable devices and memory registrations from consuming a large portion of the Send buffer by reducing the maximum data payload that can be conveyed with such devices. For now I choose an arbitrary maximum of 8 RDMA segments. This allows a maximum size RPC-over-RDMA header to fit nicely in the current 1024 byte inline threshold with over 700 bytes remaining for an inline RPC message. The current maximum data payload of NFS READ or WRITE requests is one megabyte. To convey that payload on a client with 4KB pages, each chunk segment would need to handle 32 or more data pages. This is well within the capabilities of FMR. For physical registration, the maximum payload size on platforms with 4KB pages is reduced to 32KB. For FRWR, a device's maximum page list depth would need to be at least 34 to support the maximum 1MB payload. A device with a smaller maximum page list depth means the maximum data payload is reduced when using that device. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-02 18:40:56 +00:00
*
* or about 400 bytes. The fixed part of the header is
* another 24 bytes. Thus when the inline threshold is
* 1024 bytes, at least 600 bytes are available for RPC
* message bodies.
xprtrdma: Limit number of RDMA segments in RPC-over-RDMA headers Send buffer space is shared between the RPC-over-RDMA header and an RPC message. A large RPC-over-RDMA header means less space is available for the associated RPC message, which then has to be moved via an RDMA Read or Write. As more segments are added to the chunk lists, the header increases in size. Typical modern hardware needs only a few segments to convey the maximum payload size, but some devices and registration modes may need a lot of segments to convey data payload. Sometimes so many are needed that the remaining space in the Send buffer is not enough for the RPC message. Sending such a message usually fails. To ensure a transport can always make forward progress, cap the number of RDMA segments that are allowed in chunk lists. This prevents less-capable devices and memory registrations from consuming a large portion of the Send buffer by reducing the maximum data payload that can be conveyed with such devices. For now I choose an arbitrary maximum of 8 RDMA segments. This allows a maximum size RPC-over-RDMA header to fit nicely in the current 1024 byte inline threshold with over 700 bytes remaining for an inline RPC message. The current maximum data payload of NFS READ or WRITE requests is one megabyte. To convey that payload on a client with 4KB pages, each chunk segment would need to handle 32 or more data pages. This is well within the capabilities of FMR. For physical registration, the maximum payload size on platforms with 4KB pages is reduced to 32KB. For FRWR, a device's maximum page list depth would need to be at least 34 to support the maximum 1MB payload. A device with a smaller maximum page list depth means the maximum data payload is reduced when using that device. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-02 18:40:56 +00:00
*/
enum {
RPCRDMA_MAX_HDR_SEGS = 16,
};
xprtrdma: Limit number of RDMA segments in RPC-over-RDMA headers Send buffer space is shared between the RPC-over-RDMA header and an RPC message. A large RPC-over-RDMA header means less space is available for the associated RPC message, which then has to be moved via an RDMA Read or Write. As more segments are added to the chunk lists, the header increases in size. Typical modern hardware needs only a few segments to convey the maximum payload size, but some devices and registration modes may need a lot of segments to convey data payload. Sometimes so many are needed that the remaining space in the Send buffer is not enough for the RPC message. Sending such a message usually fails. To ensure a transport can always make forward progress, cap the number of RDMA segments that are allowed in chunk lists. This prevents less-capable devices and memory registrations from consuming a large portion of the Send buffer by reducing the maximum data payload that can be conveyed with such devices. For now I choose an arbitrary maximum of 8 RDMA segments. This allows a maximum size RPC-over-RDMA header to fit nicely in the current 1024 byte inline threshold with over 700 bytes remaining for an inline RPC message. The current maximum data payload of NFS READ or WRITE requests is one megabyte. To convey that payload on a client with 4KB pages, each chunk segment would need to handle 32 or more data pages. This is well within the capabilities of FMR. For physical registration, the maximum payload size on platforms with 4KB pages is reduced to 32KB. For FRWR, a device's maximum page list depth would need to be at least 34 to support the maximum 1MB payload. A device with a smaller maximum page list depth means the maximum data payload is reduced when using that device. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-02 18:40:56 +00:00
/*
* struct rpcrdma_rep -- this structure encapsulates state required
* to receive and complete an RPC Reply, asychronously. It needs
* several pieces of state:
*
* o receive buffer and ib_sge (donated to provider)
* o status of receive (success or not, length, inv rkey)
* o bookkeeping state to get run by reply handler (XDR stream)
*
* These structures are allocated during transport initialization.
* N of these are associated with a transport instance, managed by
* struct rpcrdma_buffer. N is the max number of outstanding RPCs.
*/
struct rpcrdma_rep {
struct ib_cqe rr_cqe;
struct rpc_rdma_cid rr_cid;
__be32 rr_xid;
__be32 rr_vers;
__be32 rr_proc;
int rr_wc_flags;
u32 rr_inv_rkey;
bool rr_temp;
struct rpcrdma_regbuf *rr_rdmabuf;
struct rpcrdma_xprt *rr_rxprt;
struct rpc_rqst *rr_rqst;
struct xdr_buf rr_hdrbuf;
struct xdr_stream rr_stream;
struct llist_node rr_node;
struct ib_recv_wr rr_recv_wr;
xprtrdma: Fix oops in Receive handler after device removal Since v5.4, a device removal occasionally triggered this oops: Dec 2 17:13:53 manet kernel: BUG: unable to handle page fault for address: 0000000c00000219 Dec 2 17:13:53 manet kernel: #PF: supervisor read access in kernel mode Dec 2 17:13:53 manet kernel: #PF: error_code(0x0000) - not-present page Dec 2 17:13:53 manet kernel: PGD 0 P4D 0 Dec 2 17:13:53 manet kernel: Oops: 0000 [#1] SMP Dec 2 17:13:53 manet kernel: CPU: 2 PID: 468 Comm: kworker/2:1H Tainted: G W 5.4.0-00050-g53717e43af61 #883 Dec 2 17:13:53 manet kernel: Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015 Dec 2 17:13:53 manet kernel: Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] Dec 2 17:13:53 manet kernel: RIP: 0010:rpcrdma_wc_receive+0x7c/0xf6 [rpcrdma] Dec 2 17:13:53 manet kernel: Code: 6d 8b 43 14 89 c1 89 45 78 48 89 4d 40 8b 43 2c 89 45 14 8b 43 20 89 45 18 48 8b 45 20 8b 53 14 48 8b 30 48 8b 40 10 48 8b 38 <48> 8b 87 18 02 00 00 48 85 c0 75 18 48 8b 05 1e 24 c4 e1 48 85 c0 Dec 2 17:13:53 manet kernel: RSP: 0018:ffffc900035dfe00 EFLAGS: 00010246 Dec 2 17:13:53 manet kernel: RAX: ffff888467290000 RBX: ffff88846c638400 RCX: 0000000000000048 Dec 2 17:13:53 manet kernel: RDX: 0000000000000048 RSI: 00000000f942e000 RDI: 0000000c00000001 Dec 2 17:13:53 manet kernel: RBP: ffff888467611b00 R08: ffff888464e4a3c4 R09: 0000000000000000 Dec 2 17:13:53 manet kernel: R10: ffffc900035dfc88 R11: fefefefefefefeff R12: ffff888865af4428 Dec 2 17:13:53 manet kernel: R13: ffff888466023000 R14: ffff88846c63f000 R15: 0000000000000010 Dec 2 17:13:53 manet kernel: FS: 0000000000000000(0000) GS:ffff88846fa80000(0000) knlGS:0000000000000000 Dec 2 17:13:53 manet kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Dec 2 17:13:53 manet kernel: CR2: 0000000c00000219 CR3: 0000000002009002 CR4: 00000000001606e0 Dec 2 17:13:53 manet kernel: Call Trace: Dec 2 17:13:53 manet kernel: __ib_process_cq+0x5c/0x14e [ib_core] Dec 2 17:13:53 manet kernel: ib_cq_poll_work+0x26/0x70 [ib_core] Dec 2 17:13:53 manet kernel: process_one_work+0x19d/0x2cd Dec 2 17:13:53 manet kernel: ? cancel_delayed_work_sync+0xf/0xf Dec 2 17:13:53 manet kernel: worker_thread+0x1a6/0x25a Dec 2 17:13:53 manet kernel: ? cancel_delayed_work_sync+0xf/0xf Dec 2 17:13:53 manet kernel: kthread+0xf4/0xf9 Dec 2 17:13:53 manet kernel: ? kthread_queue_delayed_work+0x74/0x74 Dec 2 17:13:53 manet kernel: ret_from_fork+0x24/0x30 The proximal cause is that this rpcrdma_rep has a rr_rdmabuf that is still pointing to the old ib_device, which has been freed. The only way that is possible is if this rpcrdma_rep was not destroyed by rpcrdma_ia_remove. Debugging showed that was indeed the case: this rpcrdma_rep was still in use by a completing RPC at the time of the device removal, and thus wasn't on the rep free list. So, it was not found by rpcrdma_reps_destroy(). The fix is to introduce a list of all rpcrdma_reps so that they all can be found when a device is removed. That list is used to perform only regbuf DMA unmapping, replacing that call to rpcrdma_reps_destroy(). Meanwhile, to prevent corruption of this list, I've moved the destruction of temp rpcrdma_rep objects to rpcrdma_post_recvs(). rpcrdma_xprt_drain() ensures that post_recvs (and thus rep_destroy) is not invoked while rpcrdma_reps_unmap is walking rb_all_reps, thus protecting the rb_all_reps list. Fixes: b0b227f071a0 ("xprtrdma: Use an llist to manage free rpcrdma_reps") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-03 16:52:22 +00:00
struct list_head rr_all;
};
/* To reduce the rate at which a transport invokes ib_post_recv
* (and thus the hardware doorbell rate), xprtrdma posts Receive
* WRs in batches.
*
* Setting this to zero disables Receive post batching.
*/
enum {
RPCRDMA_MAX_RECV_BATCH = 7,
};
xprtrdma: Add data structure to manage RDMA Send arguments Problem statement: Recently Sagi Grimberg <sagi@grimberg.me> observed that kernel RDMA- enabled storage initiators don't handle delayed Send completion correctly. If Send completion is delayed beyond the end of a ULP transaction, the ULP may release resources that are still being used by the HCA to complete a long-running Send operation. This is a common design trait amongst our initiators. Most Send operations are faster than the ULP transaction they are part of. Waiting for a completion for these is typically unnecessary. Infrequently, a network partition or some other problem crops up where an ordering problem can occur. In NFS parlance, the RPC Reply arrives and completes the RPC, but the HCA is still retrying the Send WR that conveyed the RPC Call. In this case, the HCA can try to use memory that has been invalidated or DMA unmapped, and the connection is lost. If that memory has been re-used for something else (possibly not related to NFS), and the Send retransmission exposes that data on the wire. Thus we cannot assume that it is safe to release Send-related resources just because a ULP reply has arrived. After some analysis, we have determined that the completion housekeeping will not be difficult for xprtrdma: - Inline Send buffers are registered via the local DMA key, and are already left DMA mapped for the lifetime of a transport connection, thus no additional handling is necessary for those - Gathered Sends involving page cache pages _will_ need to DMA unmap those pages after the Send completes. But like inline send buffers, they are registered via the local DMA key, and thus will not need to be invalidated In addition, RPC completion will need to wait for Send completion in the latter case. However, nearly always, the Send that conveys the RPC Call will have completed long before the RPC Reply arrives, and thus no additional latency will be accrued. Design notes: In this patch, the rpcrdma_sendctx object is introduced, and a lock-free circular queue is added to manage a set of them per transport. The RPC client's send path already prevents sending more than one RPC Call at the same time. This allows us to treat the consumer side of the queue (rpcrdma_sendctx_get_locked) as if there is a single consumer thread. The producer side of the queue (rpcrdma_sendctx_put_locked) is invoked only from the Send completion handler, which is a single thread of execution (soft IRQ). The only care that needs to be taken is with the tail index, which is shared between the producer and consumer. Only the producer updates the tail index. The consumer compares the head with the tail to ensure that the a sendctx that is in use is never handed out again (or, expressed more conventionally, the queue is empty). When the sendctx queue empties completely, there are enough Sends outstanding that posting more Send operations can result in a Send Queue overflow. In this case, the ULP is told to wait and try again. This introduces strong Send Queue accounting to xprtrdma. As a final touch, Jason Gunthorpe <jgunthorpe@obsidianresearch.com> suggested a mechanism that does not require signaling every Send. We signal once every N Sends, and perform SGE unmapping of N Send operations during that one completion. Reported-by: Sagi Grimberg <sagi@grimberg.me> Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-10-20 14:48:12 +00:00
/* struct rpcrdma_sendctx - DMA mapped SGEs to unmap after Send completes
*/
struct rpcrdma_req;
xprtrdma: Add data structure to manage RDMA Send arguments Problem statement: Recently Sagi Grimberg <sagi@grimberg.me> observed that kernel RDMA- enabled storage initiators don't handle delayed Send completion correctly. If Send completion is delayed beyond the end of a ULP transaction, the ULP may release resources that are still being used by the HCA to complete a long-running Send operation. This is a common design trait amongst our initiators. Most Send operations are faster than the ULP transaction they are part of. Waiting for a completion for these is typically unnecessary. Infrequently, a network partition or some other problem crops up where an ordering problem can occur. In NFS parlance, the RPC Reply arrives and completes the RPC, but the HCA is still retrying the Send WR that conveyed the RPC Call. In this case, the HCA can try to use memory that has been invalidated or DMA unmapped, and the connection is lost. If that memory has been re-used for something else (possibly not related to NFS), and the Send retransmission exposes that data on the wire. Thus we cannot assume that it is safe to release Send-related resources just because a ULP reply has arrived. After some analysis, we have determined that the completion housekeeping will not be difficult for xprtrdma: - Inline Send buffers are registered via the local DMA key, and are already left DMA mapped for the lifetime of a transport connection, thus no additional handling is necessary for those - Gathered Sends involving page cache pages _will_ need to DMA unmap those pages after the Send completes. But like inline send buffers, they are registered via the local DMA key, and thus will not need to be invalidated In addition, RPC completion will need to wait for Send completion in the latter case. However, nearly always, the Send that conveys the RPC Call will have completed long before the RPC Reply arrives, and thus no additional latency will be accrued. Design notes: In this patch, the rpcrdma_sendctx object is introduced, and a lock-free circular queue is added to manage a set of them per transport. The RPC client's send path already prevents sending more than one RPC Call at the same time. This allows us to treat the consumer side of the queue (rpcrdma_sendctx_get_locked) as if there is a single consumer thread. The producer side of the queue (rpcrdma_sendctx_put_locked) is invoked only from the Send completion handler, which is a single thread of execution (soft IRQ). The only care that needs to be taken is with the tail index, which is shared between the producer and consumer. Only the producer updates the tail index. The consumer compares the head with the tail to ensure that the a sendctx that is in use is never handed out again (or, expressed more conventionally, the queue is empty). When the sendctx queue empties completely, there are enough Sends outstanding that posting more Send operations can result in a Send Queue overflow. In this case, the ULP is told to wait and try again. This introduces strong Send Queue accounting to xprtrdma. As a final touch, Jason Gunthorpe <jgunthorpe@obsidianresearch.com> suggested a mechanism that does not require signaling every Send. We signal once every N Sends, and perform SGE unmapping of N Send operations during that one completion. Reported-by: Sagi Grimberg <sagi@grimberg.me> Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-10-20 14:48:12 +00:00
struct rpcrdma_sendctx {
struct ib_cqe sc_cqe;
struct rpc_rdma_cid sc_cid;
struct rpcrdma_req *sc_req;
xprtrdma: Add data structure to manage RDMA Send arguments Problem statement: Recently Sagi Grimberg <sagi@grimberg.me> observed that kernel RDMA- enabled storage initiators don't handle delayed Send completion correctly. If Send completion is delayed beyond the end of a ULP transaction, the ULP may release resources that are still being used by the HCA to complete a long-running Send operation. This is a common design trait amongst our initiators. Most Send operations are faster than the ULP transaction they are part of. Waiting for a completion for these is typically unnecessary. Infrequently, a network partition or some other problem crops up where an ordering problem can occur. In NFS parlance, the RPC Reply arrives and completes the RPC, but the HCA is still retrying the Send WR that conveyed the RPC Call. In this case, the HCA can try to use memory that has been invalidated or DMA unmapped, and the connection is lost. If that memory has been re-used for something else (possibly not related to NFS), and the Send retransmission exposes that data on the wire. Thus we cannot assume that it is safe to release Send-related resources just because a ULP reply has arrived. After some analysis, we have determined that the completion housekeeping will not be difficult for xprtrdma: - Inline Send buffers are registered via the local DMA key, and are already left DMA mapped for the lifetime of a transport connection, thus no additional handling is necessary for those - Gathered Sends involving page cache pages _will_ need to DMA unmap those pages after the Send completes. But like inline send buffers, they are registered via the local DMA key, and thus will not need to be invalidated In addition, RPC completion will need to wait for Send completion in the latter case. However, nearly always, the Send that conveys the RPC Call will have completed long before the RPC Reply arrives, and thus no additional latency will be accrued. Design notes: In this patch, the rpcrdma_sendctx object is introduced, and a lock-free circular queue is added to manage a set of them per transport. The RPC client's send path already prevents sending more than one RPC Call at the same time. This allows us to treat the consumer side of the queue (rpcrdma_sendctx_get_locked) as if there is a single consumer thread. The producer side of the queue (rpcrdma_sendctx_put_locked) is invoked only from the Send completion handler, which is a single thread of execution (soft IRQ). The only care that needs to be taken is with the tail index, which is shared between the producer and consumer. Only the producer updates the tail index. The consumer compares the head with the tail to ensure that the a sendctx that is in use is never handed out again (or, expressed more conventionally, the queue is empty). When the sendctx queue empties completely, there are enough Sends outstanding that posting more Send operations can result in a Send Queue overflow. In this case, the ULP is told to wait and try again. This introduces strong Send Queue accounting to xprtrdma. As a final touch, Jason Gunthorpe <jgunthorpe@obsidianresearch.com> suggested a mechanism that does not require signaling every Send. We signal once every N Sends, and perform SGE unmapping of N Send operations during that one completion. Reported-by: Sagi Grimberg <sagi@grimberg.me> Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-10-20 14:48:12 +00:00
unsigned int sc_unmap_count;
struct ib_sge sc_sges[];
};
/*
* struct rpcrdma_mr - external memory region metadata
*
* An external memory region is any buffer or page that is registered
* on the fly (ie, not pre-registered).
*/
struct rpcrdma_req;
struct rpcrdma_mr {
struct list_head mr_list;
struct rpcrdma_req *mr_req;
struct ib_mr *mr_ibmr;
struct ib_device *mr_device;
struct scatterlist *mr_sg;
int mr_nents;
enum dma_data_direction mr_dir;
struct ib_cqe mr_cqe;
struct completion mr_linv_done;
union {
struct ib_reg_wr mr_regwr;
struct ib_send_wr mr_invwr;
};
struct rpcrdma_xprt *mr_xprt;
u32 mr_handle;
u32 mr_length;
u64 mr_offset;
struct list_head mr_all;
struct rpc_rdma_cid mr_cid;
};
/*
* struct rpcrdma_req -- structure central to the request/reply sequence.
*
* N of these are associated with a transport instance, and stored in
* struct rpcrdma_buffer. N is the max number of outstanding requests.
*
* It includes pre-registered buffer memory for send AND recv.
* The recv buffer, however, is not owned by this structure, and
* is "donated" to the hardware when a recv is posted. When a
* reply is handled, the recv buffer used is given back to the
* struct rpcrdma_req associated with the request.
*
* In addition to the basic memory, this structure includes an array
* of iovs for send operations. The reason is that the iovs passed to
* ib_post_{send,recv} must not be modified until the work request
* completes.
*/
/* Maximum number of page-sized "segments" per chunk list to be
* registered or invalidated. Must handle a Reply chunk:
*/
enum {
RPCRDMA_MAX_IOV_SEGS = 3,
RPCRDMA_MAX_DATA_SEGS = ((1 * 1024 * 1024) / PAGE_SIZE) + 1,
RPCRDMA_MAX_SEGS = RPCRDMA_MAX_DATA_SEGS +
RPCRDMA_MAX_IOV_SEGS,
};
/* Arguments for DMA mapping and registration */
struct rpcrdma_mr_seg {
u32 mr_len; /* length of segment */
struct page *mr_page; /* underlying struct page */
u64 mr_offset; /* IN: page offset, OUT: iova */
};
/* The Send SGE array is provisioned to send a maximum size
* inline request:
xprtrdma: Use gathered Send for large inline messages An RPC Call message that is sent inline but that has a data payload (ie, one or more items in rq_snd_buf's page list) must be "pulled up:" - call_allocate has to reserve enough RPC Call buffer space to accommodate the data payload - call_transmit has to memcopy the rq_snd_buf's page list and tail into its head iovec before it is sent As the inline threshold is increased beyond its current 1KB default, however, this means data payloads of more than a few KB are copied by the host CPU. For example, if the inline threshold is increased just to 4KB, then NFS WRITE requests up to 4KB would involve a memcpy of the NFS WRITE's payload data into the RPC Call buffer. This is an undesirable amount of participation by the host CPU. The inline threshold may be much larger than 4KB in the future, after negotiation with a peer server. Instead of copying the components of rq_snd_buf into its head iovec, construct a gather list of these components, and send them all in place. The same approach is already used in the Linux server's RPC-over-RDMA reply path. This mechanism also eliminates the need for rpcrdma_tail_pullup, which is used to manage the XDR pad and trailing inline content when a Read list is present. This requires that the pages in rq_snd_buf's page list be DMA-mapped during marshaling, and unmapped when a data-bearing RPC is completed. This is slightly less efficient for very small I/O payloads, but significantly more efficient as data payload size and inline threshold increase past a kilobyte. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-15 14:57:24 +00:00
* - RPC-over-RDMA header
* - xdr_buf head iovec
* - RPCRDMA_MAX_INLINE bytes, in pages
xprtrdma: Use gathered Send for large inline messages An RPC Call message that is sent inline but that has a data payload (ie, one or more items in rq_snd_buf's page list) must be "pulled up:" - call_allocate has to reserve enough RPC Call buffer space to accommodate the data payload - call_transmit has to memcopy the rq_snd_buf's page list and tail into its head iovec before it is sent As the inline threshold is increased beyond its current 1KB default, however, this means data payloads of more than a few KB are copied by the host CPU. For example, if the inline threshold is increased just to 4KB, then NFS WRITE requests up to 4KB would involve a memcpy of the NFS WRITE's payload data into the RPC Call buffer. This is an undesirable amount of participation by the host CPU. The inline threshold may be much larger than 4KB in the future, after negotiation with a peer server. Instead of copying the components of rq_snd_buf into its head iovec, construct a gather list of these components, and send them all in place. The same approach is already used in the Linux server's RPC-over-RDMA reply path. This mechanism also eliminates the need for rpcrdma_tail_pullup, which is used to manage the XDR pad and trailing inline content when a Read list is present. This requires that the pages in rq_snd_buf's page list be DMA-mapped during marshaling, and unmapped when a data-bearing RPC is completed. This is slightly less efficient for very small I/O payloads, but significantly more efficient as data payload size and inline threshold increase past a kilobyte. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-15 14:57:24 +00:00
* - xdr_buf tail iovec
*
* The actual number of array elements consumed by each RPC
* depends on the device's max_sge limit.
xprtrdma: Use gathered Send for large inline messages An RPC Call message that is sent inline but that has a data payload (ie, one or more items in rq_snd_buf's page list) must be "pulled up:" - call_allocate has to reserve enough RPC Call buffer space to accommodate the data payload - call_transmit has to memcopy the rq_snd_buf's page list and tail into its head iovec before it is sent As the inline threshold is increased beyond its current 1KB default, however, this means data payloads of more than a few KB are copied by the host CPU. For example, if the inline threshold is increased just to 4KB, then NFS WRITE requests up to 4KB would involve a memcpy of the NFS WRITE's payload data into the RPC Call buffer. This is an undesirable amount of participation by the host CPU. The inline threshold may be much larger than 4KB in the future, after negotiation with a peer server. Instead of copying the components of rq_snd_buf into its head iovec, construct a gather list of these components, and send them all in place. The same approach is already used in the Linux server's RPC-over-RDMA reply path. This mechanism also eliminates the need for rpcrdma_tail_pullup, which is used to manage the XDR pad and trailing inline content when a Read list is present. This requires that the pages in rq_snd_buf's page list be DMA-mapped during marshaling, and unmapped when a data-bearing RPC is completed. This is slightly less efficient for very small I/O payloads, but significantly more efficient as data payload size and inline threshold increase past a kilobyte. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-15 14:57:24 +00:00
*/
enum {
RPCRDMA_MIN_SEND_SGES = 3,
RPCRDMA_MAX_PAGE_SGES = RPCRDMA_MAX_INLINE >> PAGE_SHIFT,
xprtrdma: Use gathered Send for large inline messages An RPC Call message that is sent inline but that has a data payload (ie, one or more items in rq_snd_buf's page list) must be "pulled up:" - call_allocate has to reserve enough RPC Call buffer space to accommodate the data payload - call_transmit has to memcopy the rq_snd_buf's page list and tail into its head iovec before it is sent As the inline threshold is increased beyond its current 1KB default, however, this means data payloads of more than a few KB are copied by the host CPU. For example, if the inline threshold is increased just to 4KB, then NFS WRITE requests up to 4KB would involve a memcpy of the NFS WRITE's payload data into the RPC Call buffer. This is an undesirable amount of participation by the host CPU. The inline threshold may be much larger than 4KB in the future, after negotiation with a peer server. Instead of copying the components of rq_snd_buf into its head iovec, construct a gather list of these components, and send them all in place. The same approach is already used in the Linux server's RPC-over-RDMA reply path. This mechanism also eliminates the need for rpcrdma_tail_pullup, which is used to manage the XDR pad and trailing inline content when a Read list is present. This requires that the pages in rq_snd_buf's page list be DMA-mapped during marshaling, and unmapped when a data-bearing RPC is completed. This is slightly less efficient for very small I/O payloads, but significantly more efficient as data payload size and inline threshold increase past a kilobyte. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-15 14:57:24 +00:00
RPCRDMA_MAX_SEND_SGES = 1 + 1 + RPCRDMA_MAX_PAGE_SGES + 1,
};
struct rpcrdma_buffer;
struct rpcrdma_req {
struct list_head rl_list;
struct rpc_rqst rl_slot;
struct rpcrdma_rep *rl_reply;
struct xdr_stream rl_stream;
struct xdr_buf rl_hdrbuf;
struct ib_send_wr rl_wr;
xprtrdma: Add data structure to manage RDMA Send arguments Problem statement: Recently Sagi Grimberg <sagi@grimberg.me> observed that kernel RDMA- enabled storage initiators don't handle delayed Send completion correctly. If Send completion is delayed beyond the end of a ULP transaction, the ULP may release resources that are still being used by the HCA to complete a long-running Send operation. This is a common design trait amongst our initiators. Most Send operations are faster than the ULP transaction they are part of. Waiting for a completion for these is typically unnecessary. Infrequently, a network partition or some other problem crops up where an ordering problem can occur. In NFS parlance, the RPC Reply arrives and completes the RPC, but the HCA is still retrying the Send WR that conveyed the RPC Call. In this case, the HCA can try to use memory that has been invalidated or DMA unmapped, and the connection is lost. If that memory has been re-used for something else (possibly not related to NFS), and the Send retransmission exposes that data on the wire. Thus we cannot assume that it is safe to release Send-related resources just because a ULP reply has arrived. After some analysis, we have determined that the completion housekeeping will not be difficult for xprtrdma: - Inline Send buffers are registered via the local DMA key, and are already left DMA mapped for the lifetime of a transport connection, thus no additional handling is necessary for those - Gathered Sends involving page cache pages _will_ need to DMA unmap those pages after the Send completes. But like inline send buffers, they are registered via the local DMA key, and thus will not need to be invalidated In addition, RPC completion will need to wait for Send completion in the latter case. However, nearly always, the Send that conveys the RPC Call will have completed long before the RPC Reply arrives, and thus no additional latency will be accrued. Design notes: In this patch, the rpcrdma_sendctx object is introduced, and a lock-free circular queue is added to manage a set of them per transport. The RPC client's send path already prevents sending more than one RPC Call at the same time. This allows us to treat the consumer side of the queue (rpcrdma_sendctx_get_locked) as if there is a single consumer thread. The producer side of the queue (rpcrdma_sendctx_put_locked) is invoked only from the Send completion handler, which is a single thread of execution (soft IRQ). The only care that needs to be taken is with the tail index, which is shared between the producer and consumer. Only the producer updates the tail index. The consumer compares the head with the tail to ensure that the a sendctx that is in use is never handed out again (or, expressed more conventionally, the queue is empty). When the sendctx queue empties completely, there are enough Sends outstanding that posting more Send operations can result in a Send Queue overflow. In this case, the ULP is told to wait and try again. This introduces strong Send Queue accounting to xprtrdma. As a final touch, Jason Gunthorpe <jgunthorpe@obsidianresearch.com> suggested a mechanism that does not require signaling every Send. We signal once every N Sends, and perform SGE unmapping of N Send operations during that one completion. Reported-by: Sagi Grimberg <sagi@grimberg.me> Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-10-20 14:48:12 +00:00
struct rpcrdma_sendctx *rl_sendctx;
xprtrdma: Initialize separate RPC call and reply buffers RPC-over-RDMA needs to separate its RPC call and reply buffers. o When an RPC Call is sent, rq_snd_buf is DMA mapped for an RDMA Send operation using DMA_TO_DEVICE o If the client expects a large RPC reply, it DMA maps rq_rcv_buf as part of a Reply chunk using DMA_FROM_DEVICE The two mappings are for data movement in opposite directions. DMA-API.txt suggests that if these mappings share a DMA cacheline, bad things can happen. This could occur in the final bytes of rq_snd_buf and the first bytes of rq_rcv_buf if the two buffers happen to share a DMA cacheline. On x86_64 the cacheline size is typically 8 bytes, and RPC call messages are usually much smaller than the send buffer, so this hasn't been a noticeable problem. But the DMA cacheline size can be larger on other platforms. Also, often rq_rcv_buf starts most of the way into a page, thus an additional RDMA segment is needed to map and register the end of that buffer. Try to avoid that scenario to reduce the cost of registering and invalidating Reply chunks. Instead of carrying a single regbuf that covers both rq_snd_buf and rq_rcv_buf, each struct rpcrdma_req now carries one regbuf for rq_snd_buf and one regbuf for rq_rcv_buf. Some incidental changes worth noting: - To clear out some spaghetti, refactor xprt_rdma_allocate. - The value stored in rg_size is the same as the value stored in the iov.length field, so eliminate rg_size Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-15 14:55:53 +00:00
struct rpcrdma_regbuf *rl_rdmabuf; /* xprt header */
struct rpcrdma_regbuf *rl_sendbuf; /* rq_snd_buf */
struct rpcrdma_regbuf *rl_recvbuf; /* rq_rcv_buf */
struct list_head rl_all;
struct kref rl_kref;
struct list_head rl_free_mrs;
struct list_head rl_registered;
struct rpcrdma_mr_seg rl_segments[RPCRDMA_MAX_SEGS];
};
xprtrdma: Allocate RPC send buffer separately from struct rpcrdma_req Because internal memory registration is an expensive and synchronous operation, xprtrdma pre-registers send and receive buffers at mount time, and then re-uses them for each RPC. A "hardway" allocation is a memory allocation and registration that replaces a send buffer during the processing of an RPC. Hardway must be done if the RPC send buffer is too small to accommodate an RPC's call and reply headers. For xprtrdma, each RPC send buffer is currently part of struct rpcrdma_req so that xprt_rdma_free(), which is passed nothing but the address of an RPC send buffer, can find its matching struct rpcrdma_req and rpcrdma_rep quickly via container_of / offsetof. That means that hardway currently has to replace a whole rpcrmda_req when it replaces an RPC send buffer. This is often a fairly hefty chunk of contiguous memory due to the size of the rl_segments array and the fact that both the send and receive buffers are part of struct rpcrdma_req. Some obscure re-use of fields in rpcrdma_req is done so that xprt_rdma_free() can detect replaced rpcrdma_req structs, and restore the original. This commit breaks apart the RPC send buffer and struct rpcrdma_req so that increasing the size of the rl_segments array does not change the alignment of each RPC send buffer. (Increasing rl_segments is needed to bump up the maximum r/wsize for NFS/RDMA). This change opens up some interesting possibilities for improving the design of xprt_rdma_allocate(). xprt_rdma_allocate() is now the one place where RPC send buffers are allocated or re-allocated, and they are now always left in place by xprt_rdma_free(). A large re-allocation that includes both the rl_segments array and the RPC send buffer is no longer needed. Send buffer re-allocation becomes quite rare. Good send buffer alignment is guaranteed no matter what the size of the rl_segments array is. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-21 16:04:08 +00:00
static inline struct rpcrdma_req *
rpcr_to_rdmar(const struct rpc_rqst *rqst)
xprtrdma: Allocate RPC send buffer separately from struct rpcrdma_req Because internal memory registration is an expensive and synchronous operation, xprtrdma pre-registers send and receive buffers at mount time, and then re-uses them for each RPC. A "hardway" allocation is a memory allocation and registration that replaces a send buffer during the processing of an RPC. Hardway must be done if the RPC send buffer is too small to accommodate an RPC's call and reply headers. For xprtrdma, each RPC send buffer is currently part of struct rpcrdma_req so that xprt_rdma_free(), which is passed nothing but the address of an RPC send buffer, can find its matching struct rpcrdma_req and rpcrdma_rep quickly via container_of / offsetof. That means that hardway currently has to replace a whole rpcrmda_req when it replaces an RPC send buffer. This is often a fairly hefty chunk of contiguous memory due to the size of the rl_segments array and the fact that both the send and receive buffers are part of struct rpcrdma_req. Some obscure re-use of fields in rpcrdma_req is done so that xprt_rdma_free() can detect replaced rpcrdma_req structs, and restore the original. This commit breaks apart the RPC send buffer and struct rpcrdma_req so that increasing the size of the rl_segments array does not change the alignment of each RPC send buffer. (Increasing rl_segments is needed to bump up the maximum r/wsize for NFS/RDMA). This change opens up some interesting possibilities for improving the design of xprt_rdma_allocate(). xprt_rdma_allocate() is now the one place where RPC send buffers are allocated or re-allocated, and they are now always left in place by xprt_rdma_free(). A large re-allocation that includes both the rl_segments array and the RPC send buffer is no longer needed. Send buffer re-allocation becomes quite rare. Good send buffer alignment is guaranteed no matter what the size of the rl_segments array is. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-21 16:04:08 +00:00
{
return container_of(rqst, struct rpcrdma_req, rl_slot);
xprtrdma: Allocate RPC send buffer separately from struct rpcrdma_req Because internal memory registration is an expensive and synchronous operation, xprtrdma pre-registers send and receive buffers at mount time, and then re-uses them for each RPC. A "hardway" allocation is a memory allocation and registration that replaces a send buffer during the processing of an RPC. Hardway must be done if the RPC send buffer is too small to accommodate an RPC's call and reply headers. For xprtrdma, each RPC send buffer is currently part of struct rpcrdma_req so that xprt_rdma_free(), which is passed nothing but the address of an RPC send buffer, can find its matching struct rpcrdma_req and rpcrdma_rep quickly via container_of / offsetof. That means that hardway currently has to replace a whole rpcrmda_req when it replaces an RPC send buffer. This is often a fairly hefty chunk of contiguous memory due to the size of the rl_segments array and the fact that both the send and receive buffers are part of struct rpcrdma_req. Some obscure re-use of fields in rpcrdma_req is done so that xprt_rdma_free() can detect replaced rpcrdma_req structs, and restore the original. This commit breaks apart the RPC send buffer and struct rpcrdma_req so that increasing the size of the rl_segments array does not change the alignment of each RPC send buffer. (Increasing rl_segments is needed to bump up the maximum r/wsize for NFS/RDMA). This change opens up some interesting possibilities for improving the design of xprt_rdma_allocate(). xprt_rdma_allocate() is now the one place where RPC send buffers are allocated or re-allocated, and they are now always left in place by xprt_rdma_free(). A large re-allocation that includes both the rl_segments array and the RPC send buffer is no longer needed. Send buffer re-allocation becomes quite rare. Good send buffer alignment is guaranteed no matter what the size of the rl_segments array is. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-21 16:04:08 +00:00
}
static inline void
rpcrdma_mr_push(struct rpcrdma_mr *mr, struct list_head *list)
{
list_add(&mr->mr_list, list);
}
static inline struct rpcrdma_mr *
rpcrdma_mr_pop(struct list_head *list)
{
struct rpcrdma_mr *mr;
mr = list_first_entry_or_null(list, struct rpcrdma_mr, mr_list);
if (mr)
list_del_init(&mr->mr_list);
return mr;
}
/*
* struct rpcrdma_buffer -- holds list/queue of pre-registered memory for
* inline requests/replies, and client/server credits.
*
* One of these is associated with a transport instance
*/
struct rpcrdma_buffer {
spinlock_t rb_lock;
struct list_head rb_send_bufs;
struct list_head rb_mrs;
xprtrdma: Add data structure to manage RDMA Send arguments Problem statement: Recently Sagi Grimberg <sagi@grimberg.me> observed that kernel RDMA- enabled storage initiators don't handle delayed Send completion correctly. If Send completion is delayed beyond the end of a ULP transaction, the ULP may release resources that are still being used by the HCA to complete a long-running Send operation. This is a common design trait amongst our initiators. Most Send operations are faster than the ULP transaction they are part of. Waiting for a completion for these is typically unnecessary. Infrequently, a network partition or some other problem crops up where an ordering problem can occur. In NFS parlance, the RPC Reply arrives and completes the RPC, but the HCA is still retrying the Send WR that conveyed the RPC Call. In this case, the HCA can try to use memory that has been invalidated or DMA unmapped, and the connection is lost. If that memory has been re-used for something else (possibly not related to NFS), and the Send retransmission exposes that data on the wire. Thus we cannot assume that it is safe to release Send-related resources just because a ULP reply has arrived. After some analysis, we have determined that the completion housekeeping will not be difficult for xprtrdma: - Inline Send buffers are registered via the local DMA key, and are already left DMA mapped for the lifetime of a transport connection, thus no additional handling is necessary for those - Gathered Sends involving page cache pages _will_ need to DMA unmap those pages after the Send completes. But like inline send buffers, they are registered via the local DMA key, and thus will not need to be invalidated In addition, RPC completion will need to wait for Send completion in the latter case. However, nearly always, the Send that conveys the RPC Call will have completed long before the RPC Reply arrives, and thus no additional latency will be accrued. Design notes: In this patch, the rpcrdma_sendctx object is introduced, and a lock-free circular queue is added to manage a set of them per transport. The RPC client's send path already prevents sending more than one RPC Call at the same time. This allows us to treat the consumer side of the queue (rpcrdma_sendctx_get_locked) as if there is a single consumer thread. The producer side of the queue (rpcrdma_sendctx_put_locked) is invoked only from the Send completion handler, which is a single thread of execution (soft IRQ). The only care that needs to be taken is with the tail index, which is shared between the producer and consumer. Only the producer updates the tail index. The consumer compares the head with the tail to ensure that the a sendctx that is in use is never handed out again (or, expressed more conventionally, the queue is empty). When the sendctx queue empties completely, there are enough Sends outstanding that posting more Send operations can result in a Send Queue overflow. In this case, the ULP is told to wait and try again. This introduces strong Send Queue accounting to xprtrdma. As a final touch, Jason Gunthorpe <jgunthorpe@obsidianresearch.com> suggested a mechanism that does not require signaling every Send. We signal once every N Sends, and perform SGE unmapping of N Send operations during that one completion. Reported-by: Sagi Grimberg <sagi@grimberg.me> Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-10-20 14:48:12 +00:00
unsigned long rb_sc_head;
unsigned long rb_sc_tail;
unsigned long rb_sc_last;
struct rpcrdma_sendctx **rb_sc_ctxs;
struct list_head rb_allreqs;
struct list_head rb_all_mrs;
xprtrdma: Fix oops in Receive handler after device removal Since v5.4, a device removal occasionally triggered this oops: Dec 2 17:13:53 manet kernel: BUG: unable to handle page fault for address: 0000000c00000219 Dec 2 17:13:53 manet kernel: #PF: supervisor read access in kernel mode Dec 2 17:13:53 manet kernel: #PF: error_code(0x0000) - not-present page Dec 2 17:13:53 manet kernel: PGD 0 P4D 0 Dec 2 17:13:53 manet kernel: Oops: 0000 [#1] SMP Dec 2 17:13:53 manet kernel: CPU: 2 PID: 468 Comm: kworker/2:1H Tainted: G W 5.4.0-00050-g53717e43af61 #883 Dec 2 17:13:53 manet kernel: Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015 Dec 2 17:13:53 manet kernel: Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] Dec 2 17:13:53 manet kernel: RIP: 0010:rpcrdma_wc_receive+0x7c/0xf6 [rpcrdma] Dec 2 17:13:53 manet kernel: Code: 6d 8b 43 14 89 c1 89 45 78 48 89 4d 40 8b 43 2c 89 45 14 8b 43 20 89 45 18 48 8b 45 20 8b 53 14 48 8b 30 48 8b 40 10 48 8b 38 <48> 8b 87 18 02 00 00 48 85 c0 75 18 48 8b 05 1e 24 c4 e1 48 85 c0 Dec 2 17:13:53 manet kernel: RSP: 0018:ffffc900035dfe00 EFLAGS: 00010246 Dec 2 17:13:53 manet kernel: RAX: ffff888467290000 RBX: ffff88846c638400 RCX: 0000000000000048 Dec 2 17:13:53 manet kernel: RDX: 0000000000000048 RSI: 00000000f942e000 RDI: 0000000c00000001 Dec 2 17:13:53 manet kernel: RBP: ffff888467611b00 R08: ffff888464e4a3c4 R09: 0000000000000000 Dec 2 17:13:53 manet kernel: R10: ffffc900035dfc88 R11: fefefefefefefeff R12: ffff888865af4428 Dec 2 17:13:53 manet kernel: R13: ffff888466023000 R14: ffff88846c63f000 R15: 0000000000000010 Dec 2 17:13:53 manet kernel: FS: 0000000000000000(0000) GS:ffff88846fa80000(0000) knlGS:0000000000000000 Dec 2 17:13:53 manet kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Dec 2 17:13:53 manet kernel: CR2: 0000000c00000219 CR3: 0000000002009002 CR4: 00000000001606e0 Dec 2 17:13:53 manet kernel: Call Trace: Dec 2 17:13:53 manet kernel: __ib_process_cq+0x5c/0x14e [ib_core] Dec 2 17:13:53 manet kernel: ib_cq_poll_work+0x26/0x70 [ib_core] Dec 2 17:13:53 manet kernel: process_one_work+0x19d/0x2cd Dec 2 17:13:53 manet kernel: ? cancel_delayed_work_sync+0xf/0xf Dec 2 17:13:53 manet kernel: worker_thread+0x1a6/0x25a Dec 2 17:13:53 manet kernel: ? cancel_delayed_work_sync+0xf/0xf Dec 2 17:13:53 manet kernel: kthread+0xf4/0xf9 Dec 2 17:13:53 manet kernel: ? kthread_queue_delayed_work+0x74/0x74 Dec 2 17:13:53 manet kernel: ret_from_fork+0x24/0x30 The proximal cause is that this rpcrdma_rep has a rr_rdmabuf that is still pointing to the old ib_device, which has been freed. The only way that is possible is if this rpcrdma_rep was not destroyed by rpcrdma_ia_remove. Debugging showed that was indeed the case: this rpcrdma_rep was still in use by a completing RPC at the time of the device removal, and thus wasn't on the rep free list. So, it was not found by rpcrdma_reps_destroy(). The fix is to introduce a list of all rpcrdma_reps so that they all can be found when a device is removed. That list is used to perform only regbuf DMA unmapping, replacing that call to rpcrdma_reps_destroy(). Meanwhile, to prevent corruption of this list, I've moved the destruction of temp rpcrdma_rep objects to rpcrdma_post_recvs(). rpcrdma_xprt_drain() ensures that post_recvs (and thus rep_destroy) is not invoked while rpcrdma_reps_unmap is walking rb_all_reps, thus protecting the rb_all_reps list. Fixes: b0b227f071a0 ("xprtrdma: Use an llist to manage free rpcrdma_reps") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-03 16:52:22 +00:00
struct list_head rb_all_reps;
struct llist_head rb_free_reps;
__be32 rb_max_requests;
u32 rb_credits; /* most recent credit grant */
u32 rb_bc_srv_max_requests;
u32 rb_bc_max_requests;
struct work_struct rb_refresh_worker;
};
/*
* Statistics for RPCRDMA
*/
struct rpcrdma_stats {
/* accessed when sending a call */
unsigned long read_chunk_count;
unsigned long write_chunk_count;
unsigned long reply_chunk_count;
unsigned long long total_rdma_request;
/* rarely accessed error counters */
unsigned long long pullup_copy_count;
unsigned long hardway_register_count;
unsigned long failed_marshal_count;
unsigned long bad_reply_count;
unsigned long mrs_recycled;
unsigned long mrs_orphaned;
unsigned long mrs_allocated;
xprtrdma: Add data structure to manage RDMA Send arguments Problem statement: Recently Sagi Grimberg <sagi@grimberg.me> observed that kernel RDMA- enabled storage initiators don't handle delayed Send completion correctly. If Send completion is delayed beyond the end of a ULP transaction, the ULP may release resources that are still being used by the HCA to complete a long-running Send operation. This is a common design trait amongst our initiators. Most Send operations are faster than the ULP transaction they are part of. Waiting for a completion for these is typically unnecessary. Infrequently, a network partition or some other problem crops up where an ordering problem can occur. In NFS parlance, the RPC Reply arrives and completes the RPC, but the HCA is still retrying the Send WR that conveyed the RPC Call. In this case, the HCA can try to use memory that has been invalidated or DMA unmapped, and the connection is lost. If that memory has been re-used for something else (possibly not related to NFS), and the Send retransmission exposes that data on the wire. Thus we cannot assume that it is safe to release Send-related resources just because a ULP reply has arrived. After some analysis, we have determined that the completion housekeeping will not be difficult for xprtrdma: - Inline Send buffers are registered via the local DMA key, and are already left DMA mapped for the lifetime of a transport connection, thus no additional handling is necessary for those - Gathered Sends involving page cache pages _will_ need to DMA unmap those pages after the Send completes. But like inline send buffers, they are registered via the local DMA key, and thus will not need to be invalidated In addition, RPC completion will need to wait for Send completion in the latter case. However, nearly always, the Send that conveys the RPC Call will have completed long before the RPC Reply arrives, and thus no additional latency will be accrued. Design notes: In this patch, the rpcrdma_sendctx object is introduced, and a lock-free circular queue is added to manage a set of them per transport. The RPC client's send path already prevents sending more than one RPC Call at the same time. This allows us to treat the consumer side of the queue (rpcrdma_sendctx_get_locked) as if there is a single consumer thread. The producer side of the queue (rpcrdma_sendctx_put_locked) is invoked only from the Send completion handler, which is a single thread of execution (soft IRQ). The only care that needs to be taken is with the tail index, which is shared between the producer and consumer. Only the producer updates the tail index. The consumer compares the head with the tail to ensure that the a sendctx that is in use is never handed out again (or, expressed more conventionally, the queue is empty). When the sendctx queue empties completely, there are enough Sends outstanding that posting more Send operations can result in a Send Queue overflow. In this case, the ULP is told to wait and try again. This introduces strong Send Queue accounting to xprtrdma. As a final touch, Jason Gunthorpe <jgunthorpe@obsidianresearch.com> suggested a mechanism that does not require signaling every Send. We signal once every N Sends, and perform SGE unmapping of N Send operations during that one completion. Reported-by: Sagi Grimberg <sagi@grimberg.me> Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-10-20 14:48:12 +00:00
unsigned long empty_sendctx_q;
/* accessed when receiving a reply */
unsigned long long total_rdma_reply;
unsigned long long fixup_copy_count;
unsigned long reply_waits_for_send;
unsigned long local_inv_needed;
unsigned long nomsg_call_count;
unsigned long bcall_count;
};
/*
* RPCRDMA transport -- encapsulates the structures above for
* integration with RPC.
*
* The contained structures are embedded, not pointers,
* for convenience. This structure need not be visible externally.
*
* It is allocated and initialized during mount, and released
* during unmount.
*/
struct rpcrdma_xprt {
struct rpc_xprt rx_xprt;
struct rpcrdma_ep *rx_ep;
struct rpcrdma_buffer rx_buf;
struct delayed_work rx_connect_worker;
struct rpc_timeout rx_timeout;
struct rpcrdma_stats rx_stats;
};
#define rpcx_to_rdmax(x) container_of(x, struct rpcrdma_xprt, rx_xprt)
static inline const char *
rpcrdma_addrstr(const struct rpcrdma_xprt *r_xprt)
{
return r_xprt->rx_xprt.address_strings[RPC_DISPLAY_ADDR];
}
static inline const char *
rpcrdma_portstr(const struct rpcrdma_xprt *r_xprt)
{
return r_xprt->rx_xprt.address_strings[RPC_DISPLAY_PORT];
}
/* Setting this to 0 ensures interoperability with early servers.
* Setting this to 1 enhances certain unaligned read/write performance.
* Default is 0, see sysctl entry and rpc_rdma.c rpcrdma_convert_iovs() */
extern int xprt_rdma_pad_optimize;
/* This setting controls the hunt for a supported memory
* registration strategy.
*/
extern unsigned int xprt_rdma_memreg_strategy;
/*
* Endpoint calls - xprtrdma/verbs.c
*/
void rpcrdma_force_disconnect(struct rpcrdma_ep *ep);
void rpcrdma_flush_disconnect(struct rpcrdma_xprt *r_xprt, struct ib_wc *wc);
int rpcrdma_xprt_connect(struct rpcrdma_xprt *r_xprt);
void rpcrdma_xprt_disconnect(struct rpcrdma_xprt *r_xprt);
void rpcrdma_post_recvs(struct rpcrdma_xprt *r_xprt, int needed, bool temp);
/*
* Buffer calls - xprtrdma/verbs.c
*/
struct rpcrdma_req *rpcrdma_req_create(struct rpcrdma_xprt *r_xprt,
size_t size);
int rpcrdma_req_setup(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req);
void rpcrdma_req_destroy(struct rpcrdma_req *req);
int rpcrdma_buffer_create(struct rpcrdma_xprt *);
void rpcrdma_buffer_destroy(struct rpcrdma_buffer *);
struct rpcrdma_sendctx *rpcrdma_sendctx_get_locked(struct rpcrdma_xprt *r_xprt);
struct rpcrdma_mr *rpcrdma_mr_get(struct rpcrdma_xprt *r_xprt);
void rpcrdma_mrs_refresh(struct rpcrdma_xprt *r_xprt);
struct rpcrdma_req *rpcrdma_buffer_get(struct rpcrdma_buffer *);
void rpcrdma_buffer_put(struct rpcrdma_buffer *buffers,
struct rpcrdma_req *req);
void rpcrdma_rep_put(struct rpcrdma_buffer *buf, struct rpcrdma_rep *rep);
void rpcrdma_reply_put(struct rpcrdma_buffer *buffers, struct rpcrdma_req *req);
bool rpcrdma_regbuf_realloc(struct rpcrdma_regbuf *rb, size_t size,
gfp_t flags);
bool __rpcrdma_regbuf_dma_map(struct rpcrdma_xprt *r_xprt,
struct rpcrdma_regbuf *rb);
/**
* rpcrdma_regbuf_is_mapped - check if buffer is DMA mapped
*
* Returns true if the buffer is now mapped to rb->rg_device.
*/
static inline bool rpcrdma_regbuf_is_mapped(struct rpcrdma_regbuf *rb)
{
return rb->rg_device != NULL;
}
/**
* rpcrdma_regbuf_dma_map - DMA-map a regbuf
* @r_xprt: controlling transport instance
* @rb: regbuf to be mapped
*
* Returns true if the buffer is currently DMA mapped.
*/
static inline bool rpcrdma_regbuf_dma_map(struct rpcrdma_xprt *r_xprt,
struct rpcrdma_regbuf *rb)
{
if (likely(rpcrdma_regbuf_is_mapped(rb)))
return true;
return __rpcrdma_regbuf_dma_map(r_xprt, rb);
}
/*
* Wrappers for chunk registration, shared by read/write chunk code.
*/
static inline enum dma_data_direction
rpcrdma_data_dir(bool writing)
{
return writing ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
}
/* Memory registration calls xprtrdma/frwr_ops.c
*/
void frwr_reset(struct rpcrdma_req *req);
int frwr_query_device(struct rpcrdma_ep *ep, const struct ib_device *device);
int frwr_mr_init(struct rpcrdma_xprt *r_xprt, struct rpcrdma_mr *mr);
void frwr_mr_release(struct rpcrdma_mr *mr);
struct rpcrdma_mr_seg *frwr_map(struct rpcrdma_xprt *r_xprt,
struct rpcrdma_mr_seg *seg,
int nsegs, bool writing, __be32 xid,
struct rpcrdma_mr *mr);
int frwr_send(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req);
void frwr_reminv(struct rpcrdma_rep *rep, struct list_head *mrs);
void frwr_unmap_sync(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req);
void frwr_unmap_async(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req);
int frwr_wp_create(struct rpcrdma_xprt *r_xprt);
/*
* RPC/RDMA protocol calls - xprtrdma/rpc_rdma.c
*/
xprtrdma: Use gathered Send for large inline messages An RPC Call message that is sent inline but that has a data payload (ie, one or more items in rq_snd_buf's page list) must be "pulled up:" - call_allocate has to reserve enough RPC Call buffer space to accommodate the data payload - call_transmit has to memcopy the rq_snd_buf's page list and tail into its head iovec before it is sent As the inline threshold is increased beyond its current 1KB default, however, this means data payloads of more than a few KB are copied by the host CPU. For example, if the inline threshold is increased just to 4KB, then NFS WRITE requests up to 4KB would involve a memcpy of the NFS WRITE's payload data into the RPC Call buffer. This is an undesirable amount of participation by the host CPU. The inline threshold may be much larger than 4KB in the future, after negotiation with a peer server. Instead of copying the components of rq_snd_buf into its head iovec, construct a gather list of these components, and send them all in place. The same approach is already used in the Linux server's RPC-over-RDMA reply path. This mechanism also eliminates the need for rpcrdma_tail_pullup, which is used to manage the XDR pad and trailing inline content when a Read list is present. This requires that the pages in rq_snd_buf's page list be DMA-mapped during marshaling, and unmapped when a data-bearing RPC is completed. This is slightly less efficient for very small I/O payloads, but significantly more efficient as data payload size and inline threshold increase past a kilobyte. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-15 14:57:24 +00:00
enum rpcrdma_chunktype {
rpcrdma_noch = 0,
rpcrdma_noch_pullup,
rpcrdma_noch_mapped,
xprtrdma: Use gathered Send for large inline messages An RPC Call message that is sent inline but that has a data payload (ie, one or more items in rq_snd_buf's page list) must be "pulled up:" - call_allocate has to reserve enough RPC Call buffer space to accommodate the data payload - call_transmit has to memcopy the rq_snd_buf's page list and tail into its head iovec before it is sent As the inline threshold is increased beyond its current 1KB default, however, this means data payloads of more than a few KB are copied by the host CPU. For example, if the inline threshold is increased just to 4KB, then NFS WRITE requests up to 4KB would involve a memcpy of the NFS WRITE's payload data into the RPC Call buffer. This is an undesirable amount of participation by the host CPU. The inline threshold may be much larger than 4KB in the future, after negotiation with a peer server. Instead of copying the components of rq_snd_buf into its head iovec, construct a gather list of these components, and send them all in place. The same approach is already used in the Linux server's RPC-over-RDMA reply path. This mechanism also eliminates the need for rpcrdma_tail_pullup, which is used to manage the XDR pad and trailing inline content when a Read list is present. This requires that the pages in rq_snd_buf's page list be DMA-mapped during marshaling, and unmapped when a data-bearing RPC is completed. This is slightly less efficient for very small I/O payloads, but significantly more efficient as data payload size and inline threshold increase past a kilobyte. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-15 14:57:24 +00:00
rpcrdma_readch,
rpcrdma_areadch,
rpcrdma_writech,
rpcrdma_replych
};
int rpcrdma_prepare_send_sges(struct rpcrdma_xprt *r_xprt,
struct rpcrdma_req *req, u32 hdrlen,
struct xdr_buf *xdr,
enum rpcrdma_chunktype rtype);
void rpcrdma_sendctx_unmap(struct rpcrdma_sendctx *sc);
int rpcrdma_marshal_req(struct rpcrdma_xprt *r_xprt, struct rpc_rqst *rqst);
void rpcrdma_set_max_header_sizes(struct rpcrdma_ep *ep);
void rpcrdma_reset_cwnd(struct rpcrdma_xprt *r_xprt);
void rpcrdma_complete_rqst(struct rpcrdma_rep *rep);
void rpcrdma_unpin_rqst(struct rpcrdma_rep *rep);
void rpcrdma_reply_handler(struct rpcrdma_rep *rep);
static inline void rpcrdma_set_xdrlen(struct xdr_buf *xdr, size_t len)
{
xdr->head[0].iov_len = len;
xdr->len = len;
}
/* RPC/RDMA module init - xprtrdma/transport.c
*/
extern unsigned int xprt_rdma_max_inline_read;
extern unsigned int xprt_rdma_max_inline_write;
void xprt_rdma_format_addresses(struct rpc_xprt *xprt, struct sockaddr *sap);
void xprt_rdma_free_addresses(struct rpc_xprt *xprt);
void xprt_rdma_close(struct rpc_xprt *xprt);
void xprt_rdma_print_stats(struct rpc_xprt *xprt, struct seq_file *seq);
int xprt_rdma_init(void);
void xprt_rdma_cleanup(void);
/* Backchannel calls - xprtrdma/backchannel.c
*/
#if defined(CONFIG_SUNRPC_BACKCHANNEL)
int xprt_rdma_bc_setup(struct rpc_xprt *, unsigned int);
size_t xprt_rdma_bc_maxpayload(struct rpc_xprt *);
unsigned int xprt_rdma_bc_max_slots(struct rpc_xprt *);
int rpcrdma_bc_post_recv(struct rpcrdma_xprt *, unsigned int);
void rpcrdma_bc_receive_call(struct rpcrdma_xprt *, struct rpcrdma_rep *);
int xprt_rdma_bc_send_reply(struct rpc_rqst *rqst);
void xprt_rdma_bc_free_rqst(struct rpc_rqst *);
void xprt_rdma_bc_destroy(struct rpc_xprt *, unsigned int);
#endif /* CONFIG_SUNRPC_BACKCHANNEL */
extern struct xprt_class xprt_rdma_bc;
#endif /* _LINUX_SUNRPC_XPRT_RDMA_H */