mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity
linux-stable/io_uring/futex.c

382 lines
9.3 KiB
C
Raw Normal View History

io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/io_uring.h>
#include <uapi/linux/io_uring.h>
#include "../kernel/futex/futex.h"
#include "io_uring.h"
io_uring/alloc_cache: switch to array based caching Currently lists are being used to manage this, but best practice is usually to have these in an array instead as that it cheaper to manage. Outside of that detail, games are also played with KASAN as the list is inside the cached entry itself. Finally, all users of this need a struct io_cache_entry embedded in their struct, which is union'ized with something else in there that isn't used across the free -> realloc cycle. Get rid of all of that, and simply have it be an array. This will not change the memory used, as we're just trading an 8-byte member entry for the per-elem array size. This reduces the overhead of the recycled allocations, and it reduces the amount of code code needed to support recycling to about half of what it currently is. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-20 21:19:44 +00:00
#include "alloc_cache.h"
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
#include "futex.h"
struct io_futex {
struct file *file;
io_uring: add support for vectored futex waits This adds support for IORING_OP_FUTEX_WAITV, which allows registering a notification for a number of futexes at once. If one of the futexes are woken, then the request will complete with the index of the futex that got woken as the result. This is identical to what the normal vectored futex waitv operation does. Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a pointer to a struct futex_waitv array, and sqe->off must now contain the number of elements in that array. As flags are passed in the futex_vector array, and likewise for the value and futex address(es), sqe->addr2 and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV. For cancelations, FUTEX_WAITV does not rely on the futex_unqueue() return value as we're dealing with multiple futexes. Instead, a separate per io_uring request atomic is used to claim ownership of the request. Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well, but that punts a lot of the work to the application: 1) Application would need to submit N IORING_OP_FUTEX_WAIT requests, rather than just a single IORING_OP_FUTEX_WAITV. 2) When one futex is woken, application would need to cancel the remaining N-1 requests that didn't trigger. While this is of course doable, having a single vectored futex wait makes for much simpler application code. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-13 01:04:32 +00:00
union {
u32 __user *uaddr;
struct futex_waitv __user *uwaitv;
};
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
unsigned long futex_val;
unsigned long futex_mask;
io_uring: add support for vectored futex waits This adds support for IORING_OP_FUTEX_WAITV, which allows registering a notification for a number of futexes at once. If one of the futexes are woken, then the request will complete with the index of the futex that got woken as the result. This is identical to what the normal vectored futex waitv operation does. Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a pointer to a struct futex_waitv array, and sqe->off must now contain the number of elements in that array. As flags are passed in the futex_vector array, and likewise for the value and futex address(es), sqe->addr2 and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV. For cancelations, FUTEX_WAITV does not rely on the futex_unqueue() return value as we're dealing with multiple futexes. Instead, a separate per io_uring request atomic is used to claim ownership of the request. Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well, but that punts a lot of the work to the application: 1) Application would need to submit N IORING_OP_FUTEX_WAIT requests, rather than just a single IORING_OP_FUTEX_WAITV. 2) When one futex is woken, application would need to cancel the remaining N-1 requests that didn't trigger. While this is of course doable, having a single vectored futex wait makes for much simpler application code. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-13 01:04:32 +00:00
unsigned long futexv_owned;
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
u32 futex_flags;
io_uring: add support for vectored futex waits This adds support for IORING_OP_FUTEX_WAITV, which allows registering a notification for a number of futexes at once. If one of the futexes are woken, then the request will complete with the index of the futex that got woken as the result. This is identical to what the normal vectored futex waitv operation does. Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a pointer to a struct futex_waitv array, and sqe->off must now contain the number of elements in that array. As flags are passed in the futex_vector array, and likewise for the value and futex address(es), sqe->addr2 and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV. For cancelations, FUTEX_WAITV does not rely on the futex_unqueue() return value as we're dealing with multiple futexes. Instead, a separate per io_uring request atomic is used to claim ownership of the request. Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well, but that punts a lot of the work to the application: 1) Application would need to submit N IORING_OP_FUTEX_WAIT requests, rather than just a single IORING_OP_FUTEX_WAITV. 2) When one futex is woken, application would need to cancel the remaining N-1 requests that didn't trigger. While this is of course doable, having a single vectored futex wait makes for much simpler application code. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-13 01:04:32 +00:00
unsigned int futex_nr;
bool futexv_unqueued;
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
};
struct io_futex_data {
io_uring/alloc_cache: switch to array based caching Currently lists are being used to manage this, but best practice is usually to have these in an array instead as that it cheaper to manage. Outside of that detail, games are also played with KASAN as the list is inside the cached entry itself. Finally, all users of this need a struct io_cache_entry embedded in their struct, which is union'ized with something else in there that isn't used across the free -> realloc cycle. Get rid of all of that, and simply have it be an array. This will not change the memory used, as we're just trading an 8-byte member entry for the per-elem array size. This reduces the overhead of the recycled allocations, and it reduces the amount of code code needed to support recycling to about half of what it currently is. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-20 21:19:44 +00:00
struct futex_q q;
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
struct io_kiocb *req;
};
io_uring/alloc_cache: switch to array based caching Currently lists are being used to manage this, but best practice is usually to have these in an array instead as that it cheaper to manage. Outside of that detail, games are also played with KASAN as the list is inside the cached entry itself. Finally, all users of this need a struct io_cache_entry embedded in their struct, which is union'ized with something else in there that isn't used across the free -> realloc cycle. Get rid of all of that, and simply have it be an array. This will not change the memory used, as we're just trading an 8-byte member entry for the per-elem array size. This reduces the overhead of the recycled allocations, and it reduces the amount of code code needed to support recycling to about half of what it currently is. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-20 21:19:44 +00:00
#define IO_FUTEX_ALLOC_CACHE_MAX 32
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
io_uring/alloc_cache: switch to array based caching Currently lists are being used to manage this, but best practice is usually to have these in an array instead as that it cheaper to manage. Outside of that detail, games are also played with KASAN as the list is inside the cached entry itself. Finally, all users of this need a struct io_cache_entry embedded in their struct, which is union'ized with something else in there that isn't used across the free -> realloc cycle. Get rid of all of that, and simply have it be an array. This will not change the memory used, as we're just trading an 8-byte member entry for the per-elem array size. This reduces the overhead of the recycled allocations, and it reduces the amount of code code needed to support recycling to about half of what it currently is. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-20 21:19:44 +00:00
bool io_futex_cache_init(struct io_ring_ctx *ctx)
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
{
io_uring/alloc_cache: switch to array based caching Currently lists are being used to manage this, but best practice is usually to have these in an array instead as that it cheaper to manage. Outside of that detail, games are also played with KASAN as the list is inside the cached entry itself. Finally, all users of this need a struct io_cache_entry embedded in their struct, which is union'ized with something else in there that isn't used across the free -> realloc cycle. Get rid of all of that, and simply have it be an array. This will not change the memory used, as we're just trading an 8-byte member entry for the per-elem array size. This reduces the overhead of the recycled allocations, and it reduces the amount of code code needed to support recycling to about half of what it currently is. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-20 21:19:44 +00:00
return io_alloc_cache_init(&ctx->futex_cache, IO_FUTEX_ALLOC_CACHE_MAX,
sizeof(struct io_futex_data));
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
}
void io_futex_cache_free(struct io_ring_ctx *ctx)
{
io_uring/alloc_cache: switch to array based caching Currently lists are being used to manage this, but best practice is usually to have these in an array instead as that it cheaper to manage. Outside of that detail, games are also played with KASAN as the list is inside the cached entry itself. Finally, all users of this need a struct io_cache_entry embedded in their struct, which is union'ized with something else in there that isn't used across the free -> realloc cycle. Get rid of all of that, and simply have it be an array. This will not change the memory used, as we're just trading an 8-byte member entry for the per-elem array size. This reduces the overhead of the recycled allocations, and it reduces the amount of code code needed to support recycling to about half of what it currently is. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-20 21:19:44 +00:00
io_alloc_cache_free(&ctx->futex_cache, kfree);
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
}
io_uring: add support for vectored futex waits This adds support for IORING_OP_FUTEX_WAITV, which allows registering a notification for a number of futexes at once. If one of the futexes are woken, then the request will complete with the index of the futex that got woken as the result. This is identical to what the normal vectored futex waitv operation does. Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a pointer to a struct futex_waitv array, and sqe->off must now contain the number of elements in that array. As flags are passed in the futex_vector array, and likewise for the value and futex address(es), sqe->addr2 and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV. For cancelations, FUTEX_WAITV does not rely on the futex_unqueue() return value as we're dealing with multiple futexes. Instead, a separate per io_uring request atomic is used to claim ownership of the request. Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well, but that punts a lot of the work to the application: 1) Application would need to submit N IORING_OP_FUTEX_WAIT requests, rather than just a single IORING_OP_FUTEX_WAITV. 2) When one futex is woken, application would need to cancel the remaining N-1 requests that didn't trigger. While this is of course doable, having a single vectored futex wait makes for much simpler application code. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-13 01:04:32 +00:00
static void __io_futex_complete(struct io_kiocb *req, struct io_tw_state *ts)
{
req->async_data = NULL;
hlist_del_init(&req->hash_node);
io_req_task_complete(req, ts);
}
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
static void io_futex_complete(struct io_kiocb *req, struct io_tw_state *ts)
{
struct io_futex_data *ifd = req->async_data;
struct io_ring_ctx *ctx = req->ctx;
io_tw_lock(ctx, ts);
io_uring/alloc_cache: switch to array based caching Currently lists are being used to manage this, but best practice is usually to have these in an array instead as that it cheaper to manage. Outside of that detail, games are also played with KASAN as the list is inside the cached entry itself. Finally, all users of this need a struct io_cache_entry embedded in their struct, which is union'ized with something else in there that isn't used across the free -> realloc cycle. Get rid of all of that, and simply have it be an array. This will not change the memory used, as we're just trading an 8-byte member entry for the per-elem array size. This reduces the overhead of the recycled allocations, and it reduces the amount of code code needed to support recycling to about half of what it currently is. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-20 21:19:44 +00:00
if (!io_alloc_cache_put(&ctx->futex_cache, ifd))
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
kfree(ifd);
io_uring: add support for vectored futex waits This adds support for IORING_OP_FUTEX_WAITV, which allows registering a notification for a number of futexes at once. If one of the futexes are woken, then the request will complete with the index of the futex that got woken as the result. This is identical to what the normal vectored futex waitv operation does. Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a pointer to a struct futex_waitv array, and sqe->off must now contain the number of elements in that array. As flags are passed in the futex_vector array, and likewise for the value and futex address(es), sqe->addr2 and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV. For cancelations, FUTEX_WAITV does not rely on the futex_unqueue() return value as we're dealing with multiple futexes. Instead, a separate per io_uring request atomic is used to claim ownership of the request. Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well, but that punts a lot of the work to the application: 1) Application would need to submit N IORING_OP_FUTEX_WAIT requests, rather than just a single IORING_OP_FUTEX_WAITV. 2) When one futex is woken, application would need to cancel the remaining N-1 requests that didn't trigger. While this is of course doable, having a single vectored futex wait makes for much simpler application code. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-13 01:04:32 +00:00
__io_futex_complete(req, ts);
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
}
io_uring: add support for vectored futex waits This adds support for IORING_OP_FUTEX_WAITV, which allows registering a notification for a number of futexes at once. If one of the futexes are woken, then the request will complete with the index of the futex that got woken as the result. This is identical to what the normal vectored futex waitv operation does. Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a pointer to a struct futex_waitv array, and sqe->off must now contain the number of elements in that array. As flags are passed in the futex_vector array, and likewise for the value and futex address(es), sqe->addr2 and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV. For cancelations, FUTEX_WAITV does not rely on the futex_unqueue() return value as we're dealing with multiple futexes. Instead, a separate per io_uring request atomic is used to claim ownership of the request. Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well, but that punts a lot of the work to the application: 1) Application would need to submit N IORING_OP_FUTEX_WAIT requests, rather than just a single IORING_OP_FUTEX_WAITV. 2) When one futex is woken, application would need to cancel the remaining N-1 requests that didn't trigger. While this is of course doable, having a single vectored futex wait makes for much simpler application code. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-13 01:04:32 +00:00
static void io_futexv_complete(struct io_kiocb *req, struct io_tw_state *ts)
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
{
io_uring: add support for vectored futex waits This adds support for IORING_OP_FUTEX_WAITV, which allows registering a notification for a number of futexes at once. If one of the futexes are woken, then the request will complete with the index of the futex that got woken as the result. This is identical to what the normal vectored futex waitv operation does. Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a pointer to a struct futex_waitv array, and sqe->off must now contain the number of elements in that array. As flags are passed in the futex_vector array, and likewise for the value and futex address(es), sqe->addr2 and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV. For cancelations, FUTEX_WAITV does not rely on the futex_unqueue() return value as we're dealing with multiple futexes. Instead, a separate per io_uring request atomic is used to claim ownership of the request. Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well, but that punts a lot of the work to the application: 1) Application would need to submit N IORING_OP_FUTEX_WAIT requests, rather than just a single IORING_OP_FUTEX_WAITV. 2) When one futex is woken, application would need to cancel the remaining N-1 requests that didn't trigger. While this is of course doable, having a single vectored futex wait makes for much simpler application code. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-13 01:04:32 +00:00
struct io_futex *iof = io_kiocb_to_cmd(req, struct io_futex);
struct futex_vector *futexv = req->async_data;
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
io_uring: add support for vectored futex waits This adds support for IORING_OP_FUTEX_WAITV, which allows registering a notification for a number of futexes at once. If one of the futexes are woken, then the request will complete with the index of the futex that got woken as the result. This is identical to what the normal vectored futex waitv operation does. Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a pointer to a struct futex_waitv array, and sqe->off must now contain the number of elements in that array. As flags are passed in the futex_vector array, and likewise for the value and futex address(es), sqe->addr2 and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV. For cancelations, FUTEX_WAITV does not rely on the futex_unqueue() return value as we're dealing with multiple futexes. Instead, a separate per io_uring request atomic is used to claim ownership of the request. Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well, but that punts a lot of the work to the application: 1) Application would need to submit N IORING_OP_FUTEX_WAIT requests, rather than just a single IORING_OP_FUTEX_WAITV. 2) When one futex is woken, application would need to cancel the remaining N-1 requests that didn't trigger. While this is of course doable, having a single vectored futex wait makes for much simpler application code. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-13 01:04:32 +00:00
io_tw_lock(req->ctx, ts);
if (!iof->futexv_unqueued) {
int res;
res = futex_unqueue_multiple(futexv, iof->futex_nr);
if (res != -1)
io_req_set_res(req, res, 0);
}
kfree(req->async_data);
req->flags &= ~REQ_F_ASYNC_DATA;
__io_futex_complete(req, ts);
}
static bool io_futexv_claim(struct io_futex *iof)
{
if (test_bit(0, &iof->futexv_owned) ||
test_and_set_bit_lock(0, &iof->futexv_owned))
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
return false;
io_uring: add support for vectored futex waits This adds support for IORING_OP_FUTEX_WAITV, which allows registering a notification for a number of futexes at once. If one of the futexes are woken, then the request will complete with the index of the futex that got woken as the result. This is identical to what the normal vectored futex waitv operation does. Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a pointer to a struct futex_waitv array, and sqe->off must now contain the number of elements in that array. As flags are passed in the futex_vector array, and likewise for the value and futex address(es), sqe->addr2 and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV. For cancelations, FUTEX_WAITV does not rely on the futex_unqueue() return value as we're dealing with multiple futexes. Instead, a separate per io_uring request atomic is used to claim ownership of the request. Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well, but that punts a lot of the work to the application: 1) Application would need to submit N IORING_OP_FUTEX_WAIT requests, rather than just a single IORING_OP_FUTEX_WAITV. 2) When one futex is woken, application would need to cancel the remaining N-1 requests that didn't trigger. While this is of course doable, having a single vectored futex wait makes for much simpler application code. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-13 01:04:32 +00:00
return true;
}
static bool __io_futex_cancel(struct io_ring_ctx *ctx, struct io_kiocb *req)
{
/* futex wake already done or in progress */
if (req->opcode == IORING_OP_FUTEX_WAIT) {
struct io_futex_data *ifd = req->async_data;
if (!futex_unqueue(&ifd->q))
return false;
req->io_task_work.func = io_futex_complete;
} else {
struct io_futex *iof = io_kiocb_to_cmd(req, struct io_futex);
if (!io_futexv_claim(iof))
return false;
req->io_task_work.func = io_futexv_complete;
}
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
hlist_del_init(&req->hash_node);
io_req_set_res(req, -ECANCELED, 0);
io_req_task_work_add(req);
return true;
}
int io_futex_cancel(struct io_ring_ctx *ctx, struct io_cancel_data *cd,
unsigned int issue_flags)
{
struct hlist_node *tmp;
struct io_kiocb *req;
int nr = 0;
if (cd->flags & (IORING_ASYNC_CANCEL_FD|IORING_ASYNC_CANCEL_FD_FIXED))
return -ENOENT;
io_ring_submit_lock(ctx, issue_flags);
hlist_for_each_entry_safe(req, tmp, &ctx->futex_list, hash_node) {
if (req->cqe.user_data != cd->data &&
!(cd->flags & IORING_ASYNC_CANCEL_ANY))
continue;
if (__io_futex_cancel(ctx, req))
nr++;
if (!(cd->flags & IORING_ASYNC_CANCEL_ALL))
break;
}
io_ring_submit_unlock(ctx, issue_flags);
if (nr)
return nr;
return -ENOENT;
}
bool io_futex_remove_all(struct io_ring_ctx *ctx, struct task_struct *task,
bool cancel_all)
{
struct hlist_node *tmp;
struct io_kiocb *req;
bool found = false;
lockdep_assert_held(&ctx->uring_lock);
hlist_for_each_entry_safe(req, tmp, &ctx->futex_list, hash_node) {
if (!io_match_task_safe(req, task, cancel_all))
continue;
io_uring/futex: always remove futex entry for cancel all We know the request is either being removed, or already in the process of being removed through task_work, so we can delete it from our futex list upfront. This is important for remove all conditions, as we otherwise will find it multiple times and prevent cancelation progress. Cc: stable@vger.kernel.org Fixes: 194bb58c6090 ("io_uring: add support for futex wake and wait") Fixes: 8f350194d5cf ("io_uring: add support for vectored futex waits") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-15 21:37:15 +00:00
hlist_del_init(&req->hash_node);
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
__io_futex_cancel(ctx, req);
found = true;
}
return found;
}
int io_futex_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
struct io_futex *iof = io_kiocb_to_cmd(req, struct io_futex);
u32 flags;
if (unlikely(sqe->len || sqe->futex_flags || sqe->buf_index ||
sqe->file_index))
return -EINVAL;
iof->uaddr = u64_to_user_ptr(READ_ONCE(sqe->addr));
iof->futex_val = READ_ONCE(sqe->addr2);
iof->futex_mask = READ_ONCE(sqe->addr3);
flags = READ_ONCE(sqe->fd);
if (flags & ~FUTEX2_VALID_MASK)
return -EINVAL;
iof->futex_flags = futex2_to_flags(flags);
if (!futex_flags_valid(iof->futex_flags))
return -EINVAL;
if (!futex_validate_input(iof->futex_flags, iof->futex_val) ||
!futex_validate_input(iof->futex_flags, iof->futex_mask))
return -EINVAL;
return 0;
}
io_uring: add support for vectored futex waits This adds support for IORING_OP_FUTEX_WAITV, which allows registering a notification for a number of futexes at once. If one of the futexes are woken, then the request will complete with the index of the futex that got woken as the result. This is identical to what the normal vectored futex waitv operation does. Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a pointer to a struct futex_waitv array, and sqe->off must now contain the number of elements in that array. As flags are passed in the futex_vector array, and likewise for the value and futex address(es), sqe->addr2 and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV. For cancelations, FUTEX_WAITV does not rely on the futex_unqueue() return value as we're dealing with multiple futexes. Instead, a separate per io_uring request atomic is used to claim ownership of the request. Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well, but that punts a lot of the work to the application: 1) Application would need to submit N IORING_OP_FUTEX_WAIT requests, rather than just a single IORING_OP_FUTEX_WAITV. 2) When one futex is woken, application would need to cancel the remaining N-1 requests that didn't trigger. While this is of course doable, having a single vectored futex wait makes for much simpler application code. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-13 01:04:32 +00:00
static void io_futex_wakev_fn(struct wake_q_head *wake_q, struct futex_q *q)
{
struct io_kiocb *req = q->wake_data;
struct io_futex *iof = io_kiocb_to_cmd(req, struct io_futex);
if (!io_futexv_claim(iof))
return;
if (unlikely(!__futex_wake_mark(q)))
return;
io_req_set_res(req, 0, 0);
req->io_task_work.func = io_futexv_complete;
io_req_task_work_add(req);
}
int io_futexv_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
struct io_futex *iof = io_kiocb_to_cmd(req, struct io_futex);
struct futex_vector *futexv;
int ret;
/* No flags or mask supported for waitv */
if (unlikely(sqe->fd || sqe->buf_index || sqe->file_index ||
sqe->addr2 || sqe->futex_flags || sqe->addr3))
return -EINVAL;
iof->uaddr = u64_to_user_ptr(READ_ONCE(sqe->addr));
iof->futex_nr = READ_ONCE(sqe->len);
if (!iof->futex_nr || iof->futex_nr > FUTEX_WAITV_MAX)
return -EINVAL;
futexv = kcalloc(iof->futex_nr, sizeof(*futexv), GFP_KERNEL);
if (!futexv)
return -ENOMEM;
ret = futex_parse_waitv(futexv, iof->uwaitv, iof->futex_nr,
io_futex_wakev_fn, req);
if (ret) {
kfree(futexv);
return ret;
}
iof->futexv_owned = 0;
iof->futexv_unqueued = 0;
req->flags |= REQ_F_ASYNC_DATA;
req->async_data = futexv;
return 0;
}
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
static void io_futex_wake_fn(struct wake_q_head *wake_q, struct futex_q *q)
{
struct io_futex_data *ifd = container_of(q, struct io_futex_data, q);
struct io_kiocb *req = ifd->req;
if (unlikely(!__futex_wake_mark(q)))
return;
io_req_set_res(req, 0, 0);
req->io_task_work.func = io_futex_complete;
io_req_task_work_add(req);
}
static struct io_futex_data *io_alloc_ifd(struct io_ring_ctx *ctx)
{
io_uring/alloc_cache: switch to array based caching Currently lists are being used to manage this, but best practice is usually to have these in an array instead as that it cheaper to manage. Outside of that detail, games are also played with KASAN as the list is inside the cached entry itself. Finally, all users of this need a struct io_cache_entry embedded in their struct, which is union'ized with something else in there that isn't used across the free -> realloc cycle. Get rid of all of that, and simply have it be an array. This will not change the memory used, as we're just trading an 8-byte member entry for the per-elem array size. This reduces the overhead of the recycled allocations, and it reduces the amount of code code needed to support recycling to about half of what it currently is. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-20 21:19:44 +00:00
struct io_futex_data *ifd;
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
io_uring/alloc_cache: switch to array based caching Currently lists are being used to manage this, but best practice is usually to have these in an array instead as that it cheaper to manage. Outside of that detail, games are also played with KASAN as the list is inside the cached entry itself. Finally, all users of this need a struct io_cache_entry embedded in their struct, which is union'ized with something else in there that isn't used across the free -> realloc cycle. Get rid of all of that, and simply have it be an array. This will not change the memory used, as we're just trading an 8-byte member entry for the per-elem array size. This reduces the overhead of the recycled allocations, and it reduces the amount of code code needed to support recycling to about half of what it currently is. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-20 21:19:44 +00:00
ifd = io_alloc_cache_get(&ctx->futex_cache);
if (ifd)
return ifd;
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
return kmalloc(sizeof(struct io_futex_data), GFP_NOWAIT);
}
io_uring: add support for vectored futex waits This adds support for IORING_OP_FUTEX_WAITV, which allows registering a notification for a number of futexes at once. If one of the futexes are woken, then the request will complete with the index of the futex that got woken as the result. This is identical to what the normal vectored futex waitv operation does. Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a pointer to a struct futex_waitv array, and sqe->off must now contain the number of elements in that array. As flags are passed in the futex_vector array, and likewise for the value and futex address(es), sqe->addr2 and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV. For cancelations, FUTEX_WAITV does not rely on the futex_unqueue() return value as we're dealing with multiple futexes. Instead, a separate per io_uring request atomic is used to claim ownership of the request. Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well, but that punts a lot of the work to the application: 1) Application would need to submit N IORING_OP_FUTEX_WAIT requests, rather than just a single IORING_OP_FUTEX_WAITV. 2) When one futex is woken, application would need to cancel the remaining N-1 requests that didn't trigger. While this is of course doable, having a single vectored futex wait makes for much simpler application code. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-13 01:04:32 +00:00
int io_futexv_wait(struct io_kiocb *req, unsigned int issue_flags)
{
struct io_futex *iof = io_kiocb_to_cmd(req, struct io_futex);
struct futex_vector *futexv = req->async_data;
struct io_ring_ctx *ctx = req->ctx;
int ret, woken = -1;
io_ring_submit_lock(ctx, issue_flags);
ret = futex_wait_multiple_setup(futexv, iof->futex_nr, &woken);
/*
* Error case, ret is < 0. Mark the request as failed.
*/
if (unlikely(ret < 0)) {
io_ring_submit_unlock(ctx, issue_flags);
req_set_fail(req);
io_req_set_res(req, ret, 0);
kfree(futexv);
req->async_data = NULL;
req->flags &= ~REQ_F_ASYNC_DATA;
return IOU_OK;
}
/*
* 0 return means that we successfully setup the waiters, and that
* nobody triggered a wakeup while we were doing so. If the wakeup
* happened post setup, the task_work will be run post this issue and
* under the submission lock. 1 means We got woken while setting up,
* let that side do the completion. Note that
* futex_wait_multiple_setup() will have unqueued all the futexes in
* this case. Mark us as having done that already, since this is
* different from normal wakeup.
*/
if (!ret) {
/*
* If futex_wait_multiple_setup() returns 0 for a
* successful setup, then the task state will not be
* runnable. This is fine for the sync syscall, as
* it'll be blocking unless we already got one of the
* futexes woken, but it obviously won't work for an
* async invocation. Mark us runnable again.
*/
__set_current_state(TASK_RUNNING);
hlist_add_head(&req->hash_node, &ctx->futex_list);
} else {
iof->futexv_unqueued = 1;
if (woken != -1)
io_req_set_res(req, woken, 0);
}
io_ring_submit_unlock(ctx, issue_flags);
return IOU_ISSUE_SKIP_COMPLETE;
}
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
int io_futex_wait(struct io_kiocb *req, unsigned int issue_flags)
{
struct io_futex *iof = io_kiocb_to_cmd(req, struct io_futex);
struct io_ring_ctx *ctx = req->ctx;
struct io_futex_data *ifd = NULL;
struct futex_hash_bucket *hb;
int ret;
if (!iof->futex_mask) {
ret = -EINVAL;
goto done;
}
io_ring_submit_lock(ctx, issue_flags);
ifd = io_alloc_ifd(ctx);
if (!ifd) {
ret = -ENOMEM;
goto done_unlock;
}
req->async_data = ifd;
ifd->q = futex_q_init;
ifd->q.bitset = iof->futex_mask;
ifd->q.wake = io_futex_wake_fn;
ifd->req = req;
ret = futex_wait_setup(iof->uaddr, iof->futex_val, iof->futex_flags,
&ifd->q, &hb);
if (!ret) {
hlist_add_head(&req->hash_node, &ctx->futex_list);
io_ring_submit_unlock(ctx, issue_flags);
futex_queue(&ifd->q, hb);
return IOU_ISSUE_SKIP_COMPLETE;
}
done_unlock:
io_ring_submit_unlock(ctx, issue_flags);
done:
if (ret < 0)
req_set_fail(req);
io_req_set_res(req, ret, 0);
kfree(ifd);
return IOU_OK;
}
int io_futex_wake(struct io_kiocb *req, unsigned int issue_flags)
{
struct io_futex *iof = io_kiocb_to_cmd(req, struct io_futex);
int ret;
/*
* Strict flags - ensure that waking 0 futexes yields a 0 result.
* See commit 43adf8449510 ("futex: FLAGS_STRICT") for details.
*/
ret = futex_wake(iof->uaddr, FLAGS_STRICT | iof->futex_flags,
iof->futex_val, iof->futex_mask);
if (ret < 0)
req_set_fail(req);
io_req_set_res(req, ret, 0);
return IOU_OK;
}