linux-stable/sound/core/sound.c

422 lines
10 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Advanced Linux Sound Architecture
* Copyright (c) by Jaroslav Kysela <perex@perex.cz>
*/
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/device.h>
#include <linux/module.h>
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
#include <linux/debugfs.h>
#include <sound/core.h>
#include <sound/minors.h>
#include <sound/info.h>
#include <sound/control.h>
#include <sound/initval.h>
#include <linux/kmod.h>
#include <linux/mutex.h>
static int major = CONFIG_SND_MAJOR;
int snd_major;
EXPORT_SYMBOL(snd_major);
static int cards_limit = 1;
MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>");
MODULE_DESCRIPTION("Advanced Linux Sound Architecture driver for soundcards.");
MODULE_LICENSE("GPL");
module_param(major, int, 0444);
MODULE_PARM_DESC(major, "Major # for sound driver.");
module_param(cards_limit, int, 0444);
MODULE_PARM_DESC(cards_limit, "Count of auto-loadable soundcards.");
MODULE_ALIAS_CHARDEV_MAJOR(CONFIG_SND_MAJOR);
/* this one holds the actual max. card number currently available.
* as default, it's identical with cards_limit option. when more
* modules are loaded manually, this limit number increases, too.
*/
int snd_ecards_limit;
EXPORT_SYMBOL(snd_ecards_limit);
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
#ifdef CONFIG_SND_DEBUG
struct dentry *sound_debugfs_root;
EXPORT_SYMBOL_GPL(sound_debugfs_root);
#endif
static struct snd_minor *snd_minors[SNDRV_OS_MINORS];
static DEFINE_MUTEX(sound_mutex);
#ifdef CONFIG_MODULES
/**
* snd_request_card - try to load the card module
* @card: the card number
*
* Tries to load the module "snd-card-X" for the given card number
* via request_module. Returns immediately if already loaded.
*/
void snd_request_card(int card)
{
if (snd_card_locked(card))
return;
if (card < 0 || card >= cards_limit)
return;
request_module("snd-card-%i", card);
}
EXPORT_SYMBOL(snd_request_card);
static void snd_request_other(int minor)
{
char *str;
switch (minor) {
case SNDRV_MINOR_SEQUENCER: str = "snd-seq"; break;
case SNDRV_MINOR_TIMER: str = "snd-timer"; break;
default: return;
}
request_module(str);
}
#endif /* modular kernel */
/**
* snd_lookup_minor_data - get user data of a registered device
* @minor: the minor number
* @type: device type (SNDRV_DEVICE_TYPE_XXX)
*
* Checks that a minor device with the specified type is registered, and returns
* its user data pointer.
*
* This function increments the reference counter of the card instance
* if an associated instance with the given minor number and type is found.
* The caller must call snd_card_unref() appropriately later.
*
* Return: The user data pointer if the specified device is found. %NULL
* otherwise.
*/
void *snd_lookup_minor_data(unsigned int minor, int type)
{
struct snd_minor *mreg;
void *private_data;
if (minor >= ARRAY_SIZE(snd_minors))
return NULL;
guard(mutex)(&sound_mutex);
mreg = snd_minors[minor];
if (mreg && mreg->type == type) {
private_data = mreg->private_data;
if (private_data && mreg->card_ptr)
get_device(&mreg->card_ptr->card_dev);
} else
private_data = NULL;
return private_data;
}
EXPORT_SYMBOL(snd_lookup_minor_data);
#ifdef CONFIG_MODULES
static struct snd_minor *autoload_device(unsigned int minor)
{
int dev;
mutex_unlock(&sound_mutex); /* release lock temporarily */
dev = SNDRV_MINOR_DEVICE(minor);
if (dev == SNDRV_MINOR_CONTROL) {
/* /dev/aloadC? */
int card = SNDRV_MINOR_CARD(minor);
struct snd_card *ref = snd_card_ref(card);
if (!ref)
snd_request_card(card);
else
snd_card_unref(ref);
} else if (dev == SNDRV_MINOR_GLOBAL) {
/* /dev/aloadSEQ */
snd_request_other(minor);
}
mutex_lock(&sound_mutex); /* reacuire lock */
return snd_minors[minor];
}
#else /* !CONFIG_MODULES */
#define autoload_device(minor) NULL
#endif /* CONFIG_MODULES */
static int snd_open(struct inode *inode, struct file *file)
{
unsigned int minor = iminor(inode);
struct snd_minor *mptr = NULL;
const struct file_operations *new_fops;
int err = 0;
if (minor >= ARRAY_SIZE(snd_minors))
return -ENODEV;
scoped_guard(mutex, &sound_mutex) {
mptr = snd_minors[minor];
if (mptr == NULL) {
mptr = autoload_device(minor);
if (!mptr)
return -ENODEV;
}
new_fops = fops_get(mptr->f_ops);
}
if (!new_fops)
return -ENODEV;
replace_fops(file, new_fops);
if (file->f_op->open)
err = file->f_op->open(inode, file);
return err;
}
static const struct file_operations snd_fops =
{
.owner = THIS_MODULE,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.open = snd_open,
.llseek = noop_llseek,
};
#ifdef CONFIG_SND_DYNAMIC_MINORS
static int snd_find_free_minor(int type, struct snd_card *card, int dev)
{
int minor;
/* static minors for module auto loading */
if (type == SNDRV_DEVICE_TYPE_SEQUENCER)
return SNDRV_MINOR_SEQUENCER;
if (type == SNDRV_DEVICE_TYPE_TIMER)
return SNDRV_MINOR_TIMER;
for (minor = 0; minor < ARRAY_SIZE(snd_minors); ++minor) {
/* skip static minors still used for module auto loading */
if (SNDRV_MINOR_DEVICE(minor) == SNDRV_MINOR_CONTROL)
continue;
if (minor == SNDRV_MINOR_SEQUENCER ||
minor == SNDRV_MINOR_TIMER)
continue;
if (!snd_minors[minor])
return minor;
}
return -EBUSY;
}
#else
static int snd_find_free_minor(int type, struct snd_card *card, int dev)
{
int minor;
switch (type) {
case SNDRV_DEVICE_TYPE_SEQUENCER:
case SNDRV_DEVICE_TYPE_TIMER:
minor = type;
break;
case SNDRV_DEVICE_TYPE_CONTROL:
if (snd_BUG_ON(!card))
return -EINVAL;
minor = SNDRV_MINOR(card->number, type);
break;
case SNDRV_DEVICE_TYPE_HWDEP:
case SNDRV_DEVICE_TYPE_RAWMIDI:
case SNDRV_DEVICE_TYPE_PCM_PLAYBACK:
case SNDRV_DEVICE_TYPE_PCM_CAPTURE:
case SNDRV_DEVICE_TYPE_COMPRESS:
if (snd_BUG_ON(!card))
return -EINVAL;
minor = SNDRV_MINOR(card->number, type + dev);
break;
default:
return -EINVAL;
}
if (snd_BUG_ON(minor < 0 || minor >= SNDRV_OS_MINORS))
return -EINVAL;
if (snd_minors[minor])
return -EBUSY;
return minor;
}
#endif
/**
* snd_register_device - Register the ALSA device file for the card
* @type: the device type, SNDRV_DEVICE_TYPE_XXX
* @card: the card instance
* @dev: the device index
* @f_ops: the file operations
* @private_data: user pointer for f_ops->open()
* @device: the device to register
*
* Registers an ALSA device file for the given card.
* The operators have to be set in reg parameter.
*
* Return: Zero if successful, or a negative error code on failure.
*/
int snd_register_device(int type, struct snd_card *card, int dev,
const struct file_operations *f_ops,
void *private_data, struct device *device)
{
int minor;
int err = 0;
struct snd_minor *preg;
if (snd_BUG_ON(!device))
return -EINVAL;
preg = kmalloc(sizeof *preg, GFP_KERNEL);
if (preg == NULL)
return -ENOMEM;
preg->type = type;
preg->card = card ? card->number : -1;
preg->device = dev;
preg->f_ops = f_ops;
preg->private_data = private_data;
preg->card_ptr = card;
guard(mutex)(&sound_mutex);
minor = snd_find_free_minor(type, card, dev);
if (minor < 0) {
err = minor;
goto error;
}
preg->dev = device;
device->devt = MKDEV(major, minor);
err = device_add(device);
if (err < 0)
goto error;
snd_minors[minor] = preg;
error:
if (err < 0)
kfree(preg);
return err;
}
EXPORT_SYMBOL(snd_register_device);
/**
* snd_unregister_device - unregister the device on the given card
* @dev: the device instance
*
* Unregisters the device file already registered via
* snd_register_device().
*
* Return: Zero if successful, or a negative error code on failure.
*/
int snd_unregister_device(struct device *dev)
{
int minor;
struct snd_minor *preg;
guard(mutex)(&sound_mutex);
for (minor = 0; minor < ARRAY_SIZE(snd_minors); ++minor) {
preg = snd_minors[minor];
if (preg && preg->dev == dev) {
snd_minors[minor] = NULL;
device_del(dev);
kfree(preg);
break;
}
}
if (minor >= ARRAY_SIZE(snd_minors))
return -ENOENT;
return 0;
}
EXPORT_SYMBOL(snd_unregister_device);
#ifdef CONFIG_SND_PROC_FS
/*
* INFO PART
*/
static const char *snd_device_type_name(int type)
{
switch (type) {
case SNDRV_DEVICE_TYPE_CONTROL:
return "control";
case SNDRV_DEVICE_TYPE_HWDEP:
return "hardware dependent";
case SNDRV_DEVICE_TYPE_RAWMIDI:
return "raw midi";
case SNDRV_DEVICE_TYPE_PCM_PLAYBACK:
return "digital audio playback";
case SNDRV_DEVICE_TYPE_PCM_CAPTURE:
return "digital audio capture";
case SNDRV_DEVICE_TYPE_SEQUENCER:
return "sequencer";
case SNDRV_DEVICE_TYPE_TIMER:
return "timer";
case SNDRV_DEVICE_TYPE_COMPRESS:
return "compress";
default:
return "?";
}
}
static void snd_minor_info_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer)
{
int minor;
struct snd_minor *mptr;
guard(mutex)(&sound_mutex);
for (minor = 0; minor < SNDRV_OS_MINORS; ++minor) {
mptr = snd_minors[minor];
if (!mptr)
continue;
if (mptr->card >= 0) {
if (mptr->device >= 0)
snd_iprintf(buffer, "%3i: [%2i-%2i]: %s\n",
minor, mptr->card, mptr->device,
snd_device_type_name(mptr->type));
else
snd_iprintf(buffer, "%3i: [%2i] : %s\n",
minor, mptr->card,
snd_device_type_name(mptr->type));
} else
snd_iprintf(buffer, "%3i: : %s\n", minor,
snd_device_type_name(mptr->type));
}
}
int __init snd_minor_info_init(void)
{
struct snd_info_entry *entry;
entry = snd_info_create_module_entry(THIS_MODULE, "devices", NULL);
if (!entry)
return -ENOMEM;
entry->c.text.read = snd_minor_info_read;
return snd_info_register(entry); /* freed in error path */
}
#endif /* CONFIG_SND_PROC_FS */
/*
* INIT PART
*/
static int __init alsa_sound_init(void)
{
snd_major = major;
snd_ecards_limit = cards_limit;
if (register_chrdev(major, "alsa", &snd_fops)) {
pr_err("ALSA core: unable to register native major device number %d\n", major);
return -EIO;
}
if (snd_info_init() < 0) {
unregister_chrdev(major, "alsa");
return -ENOMEM;
}
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
#ifdef CONFIG_SND_DEBUG
sound_debugfs_root = debugfs_create_dir("sound", NULL);
#endif
#ifndef MODULE
pr_info("Advanced Linux Sound Architecture Driver Initialized.\n");
#endif
return 0;
}
static void __exit alsa_sound_exit(void)
{
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
#ifdef CONFIG_SND_DEBUG
debugfs_remove(sound_debugfs_root);
#endif
snd_info_done();
unregister_chrdev(major, "alsa");
}
subsys_initcall(alsa_sound_init);
module_exit(alsa_sound_exit);