linux-stable/drivers/media/i2c/imx334.c

1465 lines
33 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Sony imx334 sensor driver
*
* Copyright (C) 2021 Intel Corporation
*/
#include <asm/unaligned.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-subdev.h>
/* Streaming Mode */
#define IMX334_REG_MODE_SELECT 0x3000
#define IMX334_MODE_STANDBY 0x01
#define IMX334_MODE_STREAMING 0x00
/* Lines per frame */
#define IMX334_REG_LPFR 0x3030
/* Chip ID */
#define IMX334_REG_ID 0x3044
#define IMX334_ID 0x1e
/* Exposure control */
#define IMX334_REG_SHUTTER 0x3058
#define IMX334_EXPOSURE_MIN 1
#define IMX334_EXPOSURE_OFFSET 5
#define IMX334_EXPOSURE_STEP 1
#define IMX334_EXPOSURE_DEFAULT 0x0648
/* Analog gain control */
#define IMX334_REG_AGAIN 0x30e8
#define IMX334_AGAIN_MIN 0
#define IMX334_AGAIN_MAX 240
#define IMX334_AGAIN_STEP 1
#define IMX334_AGAIN_DEFAULT 0
/* Group hold register */
#define IMX334_REG_HOLD 0x3001
/* Input clock rate */
#define IMX334_INCLK_RATE 24000000
/* CSI2 HW configuration */
#define IMX334_LINK_FREQ_891M 891000000
#define IMX334_LINK_FREQ_445M 445500000
#define IMX334_NUM_DATA_LANES 4
#define IMX334_REG_MIN 0x00
#define IMX334_REG_MAX 0xfffff
/* Test Pattern Control */
#define IMX334_REG_TP 0x329e
#define IMX334_TP_COLOR_HBARS 0xA
#define IMX334_TP_COLOR_VBARS 0xB
#define IMX334_TPG_EN_DOUT 0x329c
#define IMX334_TP_ENABLE 0x1
#define IMX334_TP_DISABLE 0x0
#define IMX334_TPG_COLORW 0x32a0
#define IMX334_TPG_COLORW_120P 0x13
#define IMX334_TP_CLK_EN 0x3148
#define IMX334_TP_CLK_EN_VAL 0x10
#define IMX334_TP_CLK_DIS_VAL 0x0
#define IMX334_DIG_CLP_MODE 0x3280
/**
* struct imx334_reg - imx334 sensor register
* @address: Register address
* @val: Register value
*/
struct imx334_reg {
u16 address;
u8 val;
};
/**
* struct imx334_reg_list - imx334 sensor register list
* @num_of_regs: Number of registers in the list
* @regs: Pointer to register list
*/
struct imx334_reg_list {
u32 num_of_regs;
const struct imx334_reg *regs;
};
/**
* struct imx334_mode - imx334 sensor mode structure
* @width: Frame width
* @height: Frame height
* @hblank: Horizontal blanking in lines
* @vblank: Vertical blanking in lines
* @vblank_min: Minimal vertical blanking in lines
* @vblank_max: Maximum vertical blanking in lines
* @pclk: Sensor pixel clock
* @link_freq_idx: Link frequency index
* @reg_list: Register list for sensor mode
*/
struct imx334_mode {
u32 width;
u32 height;
u32 hblank;
u32 vblank;
u32 vblank_min;
u32 vblank_max;
u64 pclk;
u32 link_freq_idx;
struct imx334_reg_list reg_list;
};
/**
* struct imx334 - imx334 sensor device structure
* @dev: Pointer to generic device
* @client: Pointer to i2c client
* @sd: V4L2 sub-device
* @pad: Media pad. Only one pad supported
* @reset_gpio: Sensor reset gpio
* @inclk: Sensor input clock
* @ctrl_handler: V4L2 control handler
* @link_freq_ctrl: Pointer to link frequency control
* @pclk_ctrl: Pointer to pixel clock control
* @hblank_ctrl: Pointer to horizontal blanking control
* @vblank_ctrl: Pointer to vertical blanking control
* @exp_ctrl: Pointer to exposure control
* @again_ctrl: Pointer to analog gain control
* @vblank: Vertical blanking in lines
* @cur_mode: Pointer to current selected sensor mode
* @mutex: Mutex for serializing sensor controls
* @link_freq_bitmap: Menu bitmap for link_freq_ctrl
* @cur_code: current selected format code
*/
struct imx334 {
struct device *dev;
struct i2c_client *client;
struct v4l2_subdev sd;
struct media_pad pad;
struct gpio_desc *reset_gpio;
struct clk *inclk;
struct v4l2_ctrl_handler ctrl_handler;
struct v4l2_ctrl *link_freq_ctrl;
struct v4l2_ctrl *pclk_ctrl;
struct v4l2_ctrl *hblank_ctrl;
struct v4l2_ctrl *vblank_ctrl;
struct {
struct v4l2_ctrl *exp_ctrl;
struct v4l2_ctrl *again_ctrl;
};
u32 vblank;
const struct imx334_mode *cur_mode;
struct mutex mutex;
unsigned long link_freq_bitmap;
u32 cur_code;
};
static const s64 link_freq[] = {
IMX334_LINK_FREQ_891M,
IMX334_LINK_FREQ_445M,
};
/* Sensor mode registers for 1920x1080@30fps */
static const struct imx334_reg mode_1920x1080_regs[] = {
{0x3000, 0x01},
{0x3018, 0x04},
{0x3030, 0xca},
{0x3031, 0x08},
{0x3032, 0x00},
{0x3034, 0x4c},
{0x3035, 0x04},
{0x302c, 0xf0},
{0x302d, 0x03},
{0x302e, 0x80},
{0x302f, 0x07},
{0x3074, 0xcc},
{0x3075, 0x02},
{0x308e, 0xcd},
{0x308f, 0x02},
{0x3076, 0x38},
{0x3077, 0x04},
{0x3090, 0x38},
{0x3091, 0x04},
{0x3308, 0x38},
{0x3309, 0x04},
{0x30C6, 0x00},
{0x30c7, 0x00},
{0x30ce, 0x00},
{0x30cf, 0x00},
{0x30d8, 0x18},
{0x30d9, 0x0a},
{0x304c, 0x00},
{0x304e, 0x00},
{0x304f, 0x00},
{0x3050, 0x00},
{0x30b6, 0x00},
{0x30b7, 0x00},
{0x3116, 0x08},
{0x3117, 0x00},
{0x31a0, 0x20},
{0x31a1, 0x0f},
{0x300c, 0x3b},
{0x300d, 0x29},
{0x314c, 0x29},
{0x314d, 0x01},
{0x315a, 0x06},
{0x3168, 0xa0},
{0x316a, 0x7e},
{0x319e, 0x02},
{0x3199, 0x00},
{0x319d, 0x00},
{0x31dd, 0x03},
{0x3300, 0x00},
{0x341c, 0xff},
{0x341d, 0x01},
{0x3a01, 0x03},
{0x3a18, 0x7f},
{0x3a19, 0x00},
{0x3a1a, 0x37},
{0x3a1b, 0x00},
{0x3a1c, 0x37},
{0x3a1d, 0x00},
{0x3a1e, 0xf7},
{0x3a1f, 0x00},
{0x3a20, 0x3f},
{0x3a21, 0x00},
{0x3a20, 0x6f},
{0x3a21, 0x00},
{0x3a20, 0x3f},
{0x3a21, 0x00},
{0x3a20, 0x5f},
{0x3a21, 0x00},
{0x3a20, 0x2f},
{0x3a21, 0x00},
{0x3078, 0x02},
{0x3079, 0x00},
{0x307a, 0x00},
{0x307b, 0x00},
{0x3080, 0x02},
{0x3081, 0x00},
{0x3082, 0x00},
{0x3083, 0x00},
{0x3088, 0x02},
{0x3094, 0x00},
{0x3095, 0x00},
{0x3096, 0x00},
{0x309b, 0x02},
{0x309c, 0x00},
{0x309d, 0x00},
{0x309e, 0x00},
{0x30a4, 0x00},
{0x30a5, 0x00},
{0x3288, 0x21},
{0x328a, 0x02},
{0x3414, 0x05},
{0x3416, 0x18},
{0x35Ac, 0x0e},
{0x3648, 0x01},
{0x364a, 0x04},
{0x364c, 0x04},
{0x3678, 0x01},
{0x367c, 0x31},
{0x367e, 0x31},
{0x3708, 0x02},
{0x3714, 0x01},
{0x3715, 0x02},
{0x3716, 0x02},
{0x3717, 0x02},
{0x371c, 0x3d},
{0x371d, 0x3f},
{0x372c, 0x00},
{0x372d, 0x00},
{0x372e, 0x46},
{0x372f, 0x00},
{0x3730, 0x89},
{0x3731, 0x00},
{0x3732, 0x08},
{0x3733, 0x01},
{0x3734, 0xfe},
{0x3735, 0x05},
{0x375d, 0x00},
{0x375e, 0x00},
{0x375f, 0x61},
{0x3760, 0x06},
{0x3768, 0x1b},
{0x3769, 0x1b},
{0x376a, 0x1a},
{0x376b, 0x19},
{0x376c, 0x18},
{0x376d, 0x14},
{0x376e, 0x0f},
{0x3776, 0x00},
{0x3777, 0x00},
{0x3778, 0x46},
{0x3779, 0x00},
{0x377a, 0x08},
{0x377b, 0x01},
{0x377c, 0x45},
{0x377d, 0x01},
{0x377e, 0x23},
{0x377f, 0x02},
{0x3780, 0xd9},
{0x3781, 0x03},
{0x3782, 0xf5},
{0x3783, 0x06},
{0x3784, 0xa5},
{0x3788, 0x0f},
{0x378a, 0xd9},
{0x378b, 0x03},
{0x378c, 0xeb},
{0x378d, 0x05},
{0x378e, 0x87},
{0x378f, 0x06},
{0x3790, 0xf5},
{0x3792, 0x43},
{0x3794, 0x7a},
{0x3796, 0xa1},
{0x37b0, 0x37},
{0x3e04, 0x0e},
{0x30e8, 0x50},
{0x30e9, 0x00},
{0x3e04, 0x0e},
{0x3002, 0x00},
};
/* Sensor mode registers for 3840x2160@30fps */
static const struct imx334_reg mode_3840x2160_regs[] = {
{0x3000, 0x01},
{0x3002, 0x00},
{0x3018, 0x04},
{0x37b0, 0x36},
{0x304c, 0x00},
{0x300c, 0x3b},
{0x300d, 0x2a},
{0x3034, 0x26},
{0x3035, 0x02},
{0x314c, 0x29},
{0x314d, 0x01},
{0x315a, 0x02},
{0x3168, 0xa0},
{0x316a, 0x7e},
{0x3288, 0x21},
{0x328a, 0x02},
{0x302c, 0x3c},
{0x302d, 0x00},
{0x302e, 0x00},
{0x302f, 0x0f},
{0x3076, 0x70},
{0x3077, 0x08},
{0x3090, 0x70},
{0x3091, 0x08},
{0x30d8, 0x20},
{0x30d9, 0x12},
{0x3308, 0x70},
{0x3309, 0x08},
{0x3414, 0x05},
{0x3416, 0x18},
{0x35ac, 0x0e},
{0x3648, 0x01},
{0x364a, 0x04},
{0x364c, 0x04},
{0x3678, 0x01},
{0x367c, 0x31},
{0x367e, 0x31},
{0x3708, 0x02},
{0x3714, 0x01},
{0x3715, 0x02},
{0x3716, 0x02},
{0x3717, 0x02},
{0x371c, 0x3d},
{0x371d, 0x3f},
{0x372c, 0x00},
{0x372d, 0x00},
{0x372e, 0x46},
{0x372f, 0x00},
{0x3730, 0x89},
{0x3731, 0x00},
{0x3732, 0x08},
{0x3733, 0x01},
{0x3734, 0xfe},
{0x3735, 0x05},
{0x375d, 0x00},
{0x375e, 0x00},
{0x375f, 0x61},
{0x3760, 0x06},
{0x3768, 0x1b},
{0x3769, 0x1b},
{0x376a, 0x1a},
{0x376b, 0x19},
{0x376c, 0x18},
{0x376d, 0x14},
{0x376e, 0x0f},
{0x3776, 0x00},
{0x3777, 0x00},
{0x3778, 0x46},
{0x3779, 0x00},
{0x377a, 0x08},
{0x377b, 0x01},
{0x377c, 0x45},
{0x377d, 0x01},
{0x377e, 0x23},
{0x377f, 0x02},
{0x3780, 0xd9},
{0x3781, 0x03},
{0x3782, 0xf5},
{0x3783, 0x06},
{0x3784, 0xa5},
{0x3788, 0x0f},
{0x378a, 0xd9},
{0x378b, 0x03},
{0x378c, 0xeb},
{0x378d, 0x05},
{0x378e, 0x87},
{0x378f, 0x06},
{0x3790, 0xf5},
{0x3792, 0x43},
{0x3794, 0x7a},
{0x3796, 0xa1},
{0x3e04, 0x0e},
{0x319e, 0x00},
{0x3a00, 0x01},
{0x3a18, 0xbf},
{0x3a19, 0x00},
{0x3a1a, 0x67},
{0x3a1b, 0x00},
{0x3a1c, 0x6f},
{0x3a1d, 0x00},
{0x3a1e, 0xd7},
{0x3a1f, 0x01},
{0x3a20, 0x6f},
{0x3a21, 0x00},
{0x3a22, 0xcf},
{0x3a23, 0x00},
{0x3a24, 0x6f},
{0x3a25, 0x00},
{0x3a26, 0xb7},
{0x3a27, 0x00},
{0x3a28, 0x5f},
{0x3a29, 0x00},
};
static const char * const imx334_test_pattern_menu[] = {
"Disabled",
"Vertical Color Bars",
"Horizontal Color Bars",
};
static const int imx334_test_pattern_val[] = {
IMX334_TP_DISABLE,
IMX334_TP_COLOR_HBARS,
IMX334_TP_COLOR_VBARS,
};
static const struct imx334_reg raw10_framefmt_regs[] = {
{0x3050, 0x00},
{0x319d, 0x00},
{0x341c, 0xff},
{0x341d, 0x01},
};
static const struct imx334_reg raw12_framefmt_regs[] = {
{0x3050, 0x01},
{0x319d, 0x01},
{0x341c, 0x47},
{0x341d, 0x00},
};
static const u32 imx334_mbus_codes[] = {
MEDIA_BUS_FMT_SRGGB12_1X12,
MEDIA_BUS_FMT_SRGGB10_1X10,
};
/* Supported sensor mode configurations */
static const struct imx334_mode supported_modes[] = {
{
.width = 3840,
.height = 2160,
.hblank = 560,
.vblank = 2340,
.vblank_min = 90,
.vblank_max = 132840,
.pclk = 594000000,
.link_freq_idx = 0,
.reg_list = {
.num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
.regs = mode_3840x2160_regs,
},
}, {
.width = 1920,
.height = 1080,
.hblank = 2480,
.vblank = 1170,
.vblank_min = 45,
.vblank_max = 132840,
.pclk = 297000000,
.link_freq_idx = 1,
.reg_list = {
.num_of_regs = ARRAY_SIZE(mode_1920x1080_regs),
.regs = mode_1920x1080_regs,
},
},
};
/**
* to_imx334() - imv334 V4L2 sub-device to imx334 device.
* @subdev: pointer to imx334 V4L2 sub-device
*
* Return: pointer to imx334 device
*/
static inline struct imx334 *to_imx334(struct v4l2_subdev *subdev)
{
return container_of(subdev, struct imx334, sd);
}
/**
* imx334_read_reg() - Read registers.
* @imx334: pointer to imx334 device
* @reg: register address
* @len: length of bytes to read. Max supported bytes is 4
* @val: pointer to register value to be filled.
*
* Big endian register addresses with little endian values.
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_read_reg(struct imx334 *imx334, u16 reg, u32 len, u32 *val)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx334->sd);
struct i2c_msg msgs[2] = {0};
u8 addr_buf[2] = {0};
u8 data_buf[4] = {0};
int ret;
if (WARN_ON(len > 4))
return -EINVAL;
put_unaligned_be16(reg, addr_buf);
/* Write register address */
msgs[0].addr = client->addr;
msgs[0].flags = 0;
msgs[0].len = ARRAY_SIZE(addr_buf);
msgs[0].buf = addr_buf;
/* Read data from register */
msgs[1].addr = client->addr;
msgs[1].flags = I2C_M_RD;
msgs[1].len = len;
msgs[1].buf = data_buf;
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
if (ret != ARRAY_SIZE(msgs))
return -EIO;
*val = get_unaligned_le32(data_buf);
return 0;
}
/**
* imx334_write_reg() - Write register
* @imx334: pointer to imx334 device
* @reg: register address
* @len: length of bytes. Max supported bytes is 4
* @val: register value
*
* Big endian register addresses with little endian values.
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_write_reg(struct imx334 *imx334, u16 reg, u32 len, u32 val)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx334->sd);
u8 buf[6] = {0};
if (WARN_ON(len > 4))
return -EINVAL;
put_unaligned_be16(reg, buf);
put_unaligned_le32(val, buf + 2);
if (i2c_master_send(client, buf, len + 2) != len + 2)
return -EIO;
return 0;
}
/**
* imx334_write_regs() - Write a list of registers
* @imx334: pointer to imx334 device
* @regs: list of registers to be written
* @len: length of registers array
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_write_regs(struct imx334 *imx334,
const struct imx334_reg *regs, u32 len)
{
unsigned int i;
int ret;
for (i = 0; i < len; i++) {
ret = imx334_write_reg(imx334, regs[i].address, 1, regs[i].val);
if (ret)
return ret;
}
return 0;
}
/**
* imx334_update_controls() - Update control ranges based on streaming mode
* @imx334: pointer to imx334 device
* @mode: pointer to imx334_mode sensor mode
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_update_controls(struct imx334 *imx334,
const struct imx334_mode *mode)
{
int ret;
ret = __v4l2_ctrl_s_ctrl(imx334->link_freq_ctrl, mode->link_freq_idx);
if (ret)
return ret;
ret = __v4l2_ctrl_modify_range(imx334->pclk_ctrl, mode->pclk,
mode->pclk, 1, mode->pclk);
if (ret)
return ret;
ret = __v4l2_ctrl_modify_range(imx334->hblank_ctrl, mode->hblank,
mode->hblank, 1, mode->hblank);
if (ret)
return ret;
ret = __v4l2_ctrl_modify_range(imx334->vblank_ctrl, mode->vblank_min,
mode->vblank_max, 1, mode->vblank);
if (ret)
return ret;
return __v4l2_ctrl_s_ctrl(imx334->vblank_ctrl, mode->vblank);
}
/**
* imx334_update_exp_gain() - Set updated exposure and gain
* @imx334: pointer to imx334 device
* @exposure: updated exposure value
* @gain: updated analog gain value
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_update_exp_gain(struct imx334 *imx334, u32 exposure, u32 gain)
{
u32 lpfr, shutter;
int ret;
lpfr = imx334->vblank + imx334->cur_mode->height;
shutter = lpfr - exposure;
dev_dbg(imx334->dev, "Set long exp %u analog gain %u sh0 %u lpfr %u",
exposure, gain, shutter, lpfr);
ret = imx334_write_reg(imx334, IMX334_REG_HOLD, 1, 1);
if (ret)
return ret;
ret = imx334_write_reg(imx334, IMX334_REG_LPFR, 3, lpfr);
if (ret)
goto error_release_group_hold;
ret = imx334_write_reg(imx334, IMX334_REG_SHUTTER, 3, shutter);
if (ret)
goto error_release_group_hold;
ret = imx334_write_reg(imx334, IMX334_REG_AGAIN, 1, gain);
error_release_group_hold:
imx334_write_reg(imx334, IMX334_REG_HOLD, 1, 0);
return ret;
}
/**
* imx334_set_ctrl() - Set subdevice control
* @ctrl: pointer to v4l2_ctrl structure
*
* Supported controls:
* - V4L2_CID_VBLANK
* - cluster controls:
* - V4L2_CID_ANALOGUE_GAIN
* - V4L2_CID_EXPOSURE
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct imx334 *imx334 =
container_of(ctrl->handler, struct imx334, ctrl_handler);
u32 analog_gain;
u32 exposure;
int ret;
switch (ctrl->id) {
case V4L2_CID_VBLANK:
imx334->vblank = imx334->vblank_ctrl->val;
dev_dbg(imx334->dev, "Received vblank %u, new lpfr %u",
imx334->vblank,
imx334->vblank + imx334->cur_mode->height);
ret = __v4l2_ctrl_modify_range(imx334->exp_ctrl,
IMX334_EXPOSURE_MIN,
imx334->vblank +
imx334->cur_mode->height -
IMX334_EXPOSURE_OFFSET,
1, IMX334_EXPOSURE_DEFAULT);
break;
case V4L2_CID_EXPOSURE:
/* Set controls only if sensor is in power on state */
if (!pm_runtime_get_if_in_use(imx334->dev))
return 0;
exposure = ctrl->val;
analog_gain = imx334->again_ctrl->val;
dev_dbg(imx334->dev, "Received exp %u analog gain %u",
exposure, analog_gain);
ret = imx334_update_exp_gain(imx334, exposure, analog_gain);
pm_runtime_put(imx334->dev);
break;
case V4L2_CID_PIXEL_RATE:
case V4L2_CID_LINK_FREQ:
case V4L2_CID_HBLANK:
ret = 0;
break;
case V4L2_CID_TEST_PATTERN:
if (ctrl->val) {
imx334_write_reg(imx334, IMX334_TP_CLK_EN, 1,
IMX334_TP_CLK_EN_VAL);
imx334_write_reg(imx334, IMX334_DIG_CLP_MODE, 1, 0x0);
imx334_write_reg(imx334, IMX334_TPG_COLORW, 1,
IMX334_TPG_COLORW_120P);
imx334_write_reg(imx334, IMX334_REG_TP, 1,
imx334_test_pattern_val[ctrl->val]);
imx334_write_reg(imx334, IMX334_TPG_EN_DOUT, 1,
IMX334_TP_ENABLE);
} else {
imx334_write_reg(imx334, IMX334_DIG_CLP_MODE, 1, 0x1);
imx334_write_reg(imx334, IMX334_TP_CLK_EN, 1,
IMX334_TP_CLK_DIS_VAL);
imx334_write_reg(imx334, IMX334_TPG_EN_DOUT, 1,
IMX334_TP_DISABLE);
}
ret = 0;
break;
default:
dev_err(imx334->dev, "Invalid control %d", ctrl->id);
ret = -EINVAL;
}
return ret;
}
/* V4l2 subdevice control ops*/
static const struct v4l2_ctrl_ops imx334_ctrl_ops = {
.s_ctrl = imx334_set_ctrl,
};
static int imx334_get_format_code(struct imx334 *imx334, u32 code)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(imx334_mbus_codes); i++) {
if (imx334_mbus_codes[i] == code)
return imx334_mbus_codes[i];
}
return imx334_mbus_codes[0];
}
/**
* imx334_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes
* @sd: pointer to imx334 V4L2 sub-device structure
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
* @sd_state: V4L2 sub-device state
* @code: V4L2 sub-device code enumeration need to be filled
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_enum_mbus_code(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
if (code->index >= ARRAY_SIZE(imx334_mbus_codes))
return -EINVAL;
code->code = imx334_mbus_codes[code->index];
return 0;
}
/**
* imx334_enum_frame_size() - Enumerate V4L2 sub-device frame sizes
* @sd: pointer to imx334 V4L2 sub-device structure
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
* @sd_state: V4L2 sub-device state
* @fsize: V4L2 sub-device size enumeration need to be filled
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_enum_frame_size(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_size_enum *fsize)
{
struct imx334 *imx334 = to_imx334(sd);
u32 code;
if (fsize->index >= ARRAY_SIZE(supported_modes))
return -EINVAL;
code = imx334_get_format_code(imx334, fsize->code);
if (fsize->code != code)
return -EINVAL;
fsize->min_width = supported_modes[fsize->index].width;
fsize->max_width = fsize->min_width;
fsize->min_height = supported_modes[fsize->index].height;
fsize->max_height = fsize->min_height;
return 0;
}
/**
* imx334_fill_pad_format() - Fill subdevice pad format
* from selected sensor mode
* @imx334: pointer to imx334 device
* @mode: pointer to imx334_mode sensor mode
* @fmt: V4L2 sub-device format need to be filled
*/
static void imx334_fill_pad_format(struct imx334 *imx334,
const struct imx334_mode *mode,
struct v4l2_subdev_format *fmt)
{
fmt->format.width = mode->width;
fmt->format.height = mode->height;
fmt->format.field = V4L2_FIELD_NONE;
fmt->format.colorspace = V4L2_COLORSPACE_RAW;
fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT;
fmt->format.xfer_func = V4L2_XFER_FUNC_NONE;
}
/**
* imx334_get_pad_format() - Get subdevice pad format
* @sd: pointer to imx334 V4L2 sub-device structure
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
* @sd_state: V4L2 sub-device state
* @fmt: V4L2 sub-device format need to be set
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_get_pad_format(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
struct imx334 *imx334 = to_imx334(sd);
mutex_lock(&imx334->mutex);
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
struct v4l2_mbus_framefmt *framefmt;
media: v4l: subdev: Switch to stream-aware state functions Switch all drivers accessing sub-device state to use the stream-aware functions. We will soon remove the old ones. This patch has been generated using the following Coccinelle script: ---------8<------------ @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) ---------8<------------ Additionally drivers/media/i2c/s5k5baf.c and drivers/media/platform/samsung/s3c-camif/camif-capture.c have been manually changed as Coccinelle didn't. Further local variables have been removed as they became unused as a result of the other changes. Also Coccinelle introduced indentation by space in files drivers/media/i2c/st-mipid02.c and drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c. This has been also corrected. The diff from Coccinelle-generated changes are: > diff --git b/drivers/media/i2c/imx319.c a/drivers/media/i2c/imx319.c > index e549692ff478..420984382173 100644 > --- b/drivers/media/i2c/imx319.c > +++ a/drivers/media/i2c/imx319.c > @@ -2001,7 +2001,6 @@ static int imx319_do_get_pad_format(struct imx319 *imx319, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx319->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/imx355.c a/drivers/media/i2c/imx355.c > index 96bdde685d65..e1b1d2fc79dd 100644 > --- b/drivers/media/i2c/imx355.c > +++ a/drivers/media/i2c/imx355.c > @@ -1299,7 +1299,6 @@ static int imx355_do_get_pad_format(struct imx355 *imx355, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx355->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov08x40.c a/drivers/media/i2c/ov08x40.c > index ca799bbcfdb7..abbb0b774d43 100644 > --- b/drivers/media/i2c/ov08x40.c > +++ a/drivers/media/i2c/ov08x40.c > @@ -2774,7 +2774,6 @@ static int ov08x40_do_get_pad_format(struct ov08x40 *ov08x, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov08x->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13858.c a/drivers/media/i2c/ov13858.c > index 7816d9787c61..09387e335d80 100644 > --- b/drivers/media/i2c/ov13858.c > +++ a/drivers/media/i2c/ov13858.c > @@ -1316,7 +1316,6 @@ static int ov13858_do_get_pad_format(struct ov13858 *ov13858, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13858->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13b10.c a/drivers/media/i2c/ov13b10.c > index 268cd4b03f9c..c06411d5ee2b 100644 > --- b/drivers/media/i2c/ov13b10.c > +++ a/drivers/media/i2c/ov13b10.c > @@ -1001,7 +1001,6 @@ static int ov13b10_do_get_pad_format(struct ov13b10 *ov13b, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13b->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/s5c73m3/s5c73m3-core.c a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > index 47605e36bc60..8f9b5713daf7 100644 > --- b/drivers/media/i2c/s5c73m3/s5c73m3-core.c > +++ a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > @@ -819,7 +819,6 @@ static void s5c73m3_oif_try_format(struct s5c73m3 *state, > struct v4l2_subdev_format *fmt, > const struct s5c73m3_frame_size **fs) > { > - struct v4l2_subdev *sd = &state->sensor_sd; > u32 code; > > switch (fmt->pad) { > diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c > index 67da2045f543..03ccfb0e1e11 100644 > --- a/drivers/media/i2c/s5k5baf.c > +++ b/drivers/media/i2c/s5k5baf.c > @@ -1472,14 +1472,11 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, > > if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { > rects = (struct v4l2_rect * []) { > - &s5k5baf_cis_rect, > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_compose(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_OUT) > - }; > + &s5k5baf_cis_rect, > + v4l2_subdev_state_get_crop(sd_state, PAD_CIS), > + v4l2_subdev_state_get_compose(sd_state, PAD_CIS), > + v4l2_subdev_state_get_crop(sd_state, PAD_OUT) > + }; > s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); > return 0; > } > diff --git b/drivers/media/platform/samsung/s3c-camif/camif-capture.c a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > index 295e083f38e8..be58260ea67e 100644 > --- b/drivers/media/platform/samsung/s3c-camif/camif-capture.c > +++ a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > @@ -1216,7 +1216,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, > struct v4l2_mbus_framefmt *mf = &fmt->format; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > fmt->format = *mf; > return 0; > } > @@ -1305,7 +1305,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, > __camif_subdev_try_format(camif, mf, fmt->pad); > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > *mf = fmt->format; > mutex_unlock(&camif->lock); > return 0; > diff --git b/drivers/media/platform/ti/cal/cal-camerarx.c a/drivers/media/platform/ti/cal/cal-camerarx.c > index cea454ed9c20..61433744c6c4 100644 > --- b/drivers/media/platform/ti/cal/cal-camerarx.c > +++ a/drivers/media/platform/ti/cal/cal-camerarx.c > @@ -621,8 +621,6 @@ static int cal_camerarx_sd_enum_mbus_code(struct v4l2_subdev *sd, > struct v4l2_subdev_state *state, > struct v4l2_subdev_mbus_code_enum *code) > { > - struct cal_camerarx *phy = to_cal_camerarx(sd); > - > /* No transcoding, source and sink codes must match. */ > if (cal_rx_pad_is_source(code->pad)) { > struct v4l2_mbus_framefmt *fmt; > diff --git b/drivers/staging/media/imx/imx-ic-prp.c a/drivers/staging/media/imx/imx-ic-prp.c > index dd558fac6477..61d69f19657e 100644 > --- b/drivers/staging/media/imx/imx-ic-prp.c > +++ a/drivers/staging/media/imx/imx-ic-prp.c > @@ -82,8 +82,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git b/drivers/staging/media/imx/imx-ic-prpencvf.c a/drivers/staging/media/imx/imx-ic-prpencvf.c > index 02db7dbb884b..ec73c901079e 100644 > --- b/drivers/staging/media/imx/imx-ic-prpencvf.c > +++ a/drivers/staging/media/imx/imx-ic-prpencvf.c > @@ -790,8 +790,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c > index 9c9361354c00..b08a249b5fdd 100644 > --- a/drivers/media/i2c/st-mipid02.c > +++ b/drivers/media/i2c/st-mipid02.c > @@ -751,7 +751,7 @@ static void mipid02_set_fmt_source(struct v4l2_subdev *sd, > format->format = bridge->fmt; > else > format->format = *v4l2_subdev_state_get_format(sd_state, > - MIPID02_SINK_0); > + MIPID02_SINK_0); > > /* but code may need to be converted */ > format->format.code = serial_to_parallel_code(format->format.code); > diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > index 117912d3bfbd..96353648c032 100644 > --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > @@ -319,7 +319,7 @@ static void rkisp1_isp_start(struct rkisp1_isp *isp, > rkisp1_write(rkisp1, RKISP1_CIF_ISP_CTRL, val); > > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_info = rkisp1_mbus_info_get_by_code(src_fmt->code); > > if (src_info->pixel_enc != V4L2_PIXEL_ENC_BAYER) > @@ -475,9 +475,9 @@ static void rkisp1_isp_set_src_fmt(struct rkisp1_isp *isp, > sink_fmt = v4l2_subdev_state_get_format(sd_state, > RKISP1_ISP_PAD_SINK_VIDEO); > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_crop = v4l2_subdev_state_get_crop(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > > /* > * Media bus code. The ISP can operate in pass-through mode (Bayer in, Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-10-13 07:37:10 +00:00
framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
fmt->format = *framefmt;
} else {
fmt->format.code = imx334->cur_code;
imx334_fill_pad_format(imx334, imx334->cur_mode, fmt);
}
mutex_unlock(&imx334->mutex);
return 0;
}
/**
* imx334_set_pad_format() - Set subdevice pad format
* @sd: pointer to imx334 V4L2 sub-device structure
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
* @sd_state: V4L2 sub-device state
* @fmt: V4L2 sub-device format need to be set
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_set_pad_format(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
struct imx334 *imx334 = to_imx334(sd);
const struct imx334_mode *mode;
int ret = 0;
mutex_lock(&imx334->mutex);
mode = v4l2_find_nearest_size(supported_modes,
ARRAY_SIZE(supported_modes),
width, height,
fmt->format.width, fmt->format.height);
imx334_fill_pad_format(imx334, mode, fmt);
fmt->format.code = imx334_get_format_code(imx334, fmt->format.code);
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
struct v4l2_mbus_framefmt *framefmt;
media: v4l: subdev: Switch to stream-aware state functions Switch all drivers accessing sub-device state to use the stream-aware functions. We will soon remove the old ones. This patch has been generated using the following Coccinelle script: ---------8<------------ @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) ---------8<------------ Additionally drivers/media/i2c/s5k5baf.c and drivers/media/platform/samsung/s3c-camif/camif-capture.c have been manually changed as Coccinelle didn't. Further local variables have been removed as they became unused as a result of the other changes. Also Coccinelle introduced indentation by space in files drivers/media/i2c/st-mipid02.c and drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c. This has been also corrected. The diff from Coccinelle-generated changes are: > diff --git b/drivers/media/i2c/imx319.c a/drivers/media/i2c/imx319.c > index e549692ff478..420984382173 100644 > --- b/drivers/media/i2c/imx319.c > +++ a/drivers/media/i2c/imx319.c > @@ -2001,7 +2001,6 @@ static int imx319_do_get_pad_format(struct imx319 *imx319, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx319->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/imx355.c a/drivers/media/i2c/imx355.c > index 96bdde685d65..e1b1d2fc79dd 100644 > --- b/drivers/media/i2c/imx355.c > +++ a/drivers/media/i2c/imx355.c > @@ -1299,7 +1299,6 @@ static int imx355_do_get_pad_format(struct imx355 *imx355, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx355->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov08x40.c a/drivers/media/i2c/ov08x40.c > index ca799bbcfdb7..abbb0b774d43 100644 > --- b/drivers/media/i2c/ov08x40.c > +++ a/drivers/media/i2c/ov08x40.c > @@ -2774,7 +2774,6 @@ static int ov08x40_do_get_pad_format(struct ov08x40 *ov08x, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov08x->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13858.c a/drivers/media/i2c/ov13858.c > index 7816d9787c61..09387e335d80 100644 > --- b/drivers/media/i2c/ov13858.c > +++ a/drivers/media/i2c/ov13858.c > @@ -1316,7 +1316,6 @@ static int ov13858_do_get_pad_format(struct ov13858 *ov13858, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13858->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13b10.c a/drivers/media/i2c/ov13b10.c > index 268cd4b03f9c..c06411d5ee2b 100644 > --- b/drivers/media/i2c/ov13b10.c > +++ a/drivers/media/i2c/ov13b10.c > @@ -1001,7 +1001,6 @@ static int ov13b10_do_get_pad_format(struct ov13b10 *ov13b, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13b->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/s5c73m3/s5c73m3-core.c a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > index 47605e36bc60..8f9b5713daf7 100644 > --- b/drivers/media/i2c/s5c73m3/s5c73m3-core.c > +++ a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > @@ -819,7 +819,6 @@ static void s5c73m3_oif_try_format(struct s5c73m3 *state, > struct v4l2_subdev_format *fmt, > const struct s5c73m3_frame_size **fs) > { > - struct v4l2_subdev *sd = &state->sensor_sd; > u32 code; > > switch (fmt->pad) { > diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c > index 67da2045f543..03ccfb0e1e11 100644 > --- a/drivers/media/i2c/s5k5baf.c > +++ b/drivers/media/i2c/s5k5baf.c > @@ -1472,14 +1472,11 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, > > if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { > rects = (struct v4l2_rect * []) { > - &s5k5baf_cis_rect, > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_compose(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_OUT) > - }; > + &s5k5baf_cis_rect, > + v4l2_subdev_state_get_crop(sd_state, PAD_CIS), > + v4l2_subdev_state_get_compose(sd_state, PAD_CIS), > + v4l2_subdev_state_get_crop(sd_state, PAD_OUT) > + }; > s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); > return 0; > } > diff --git b/drivers/media/platform/samsung/s3c-camif/camif-capture.c a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > index 295e083f38e8..be58260ea67e 100644 > --- b/drivers/media/platform/samsung/s3c-camif/camif-capture.c > +++ a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > @@ -1216,7 +1216,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, > struct v4l2_mbus_framefmt *mf = &fmt->format; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > fmt->format = *mf; > return 0; > } > @@ -1305,7 +1305,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, > __camif_subdev_try_format(camif, mf, fmt->pad); > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > *mf = fmt->format; > mutex_unlock(&camif->lock); > return 0; > diff --git b/drivers/media/platform/ti/cal/cal-camerarx.c a/drivers/media/platform/ti/cal/cal-camerarx.c > index cea454ed9c20..61433744c6c4 100644 > --- b/drivers/media/platform/ti/cal/cal-camerarx.c > +++ a/drivers/media/platform/ti/cal/cal-camerarx.c > @@ -621,8 +621,6 @@ static int cal_camerarx_sd_enum_mbus_code(struct v4l2_subdev *sd, > struct v4l2_subdev_state *state, > struct v4l2_subdev_mbus_code_enum *code) > { > - struct cal_camerarx *phy = to_cal_camerarx(sd); > - > /* No transcoding, source and sink codes must match. */ > if (cal_rx_pad_is_source(code->pad)) { > struct v4l2_mbus_framefmt *fmt; > diff --git b/drivers/staging/media/imx/imx-ic-prp.c a/drivers/staging/media/imx/imx-ic-prp.c > index dd558fac6477..61d69f19657e 100644 > --- b/drivers/staging/media/imx/imx-ic-prp.c > +++ a/drivers/staging/media/imx/imx-ic-prp.c > @@ -82,8 +82,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git b/drivers/staging/media/imx/imx-ic-prpencvf.c a/drivers/staging/media/imx/imx-ic-prpencvf.c > index 02db7dbb884b..ec73c901079e 100644 > --- b/drivers/staging/media/imx/imx-ic-prpencvf.c > +++ a/drivers/staging/media/imx/imx-ic-prpencvf.c > @@ -790,8 +790,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c > index 9c9361354c00..b08a249b5fdd 100644 > --- a/drivers/media/i2c/st-mipid02.c > +++ b/drivers/media/i2c/st-mipid02.c > @@ -751,7 +751,7 @@ static void mipid02_set_fmt_source(struct v4l2_subdev *sd, > format->format = bridge->fmt; > else > format->format = *v4l2_subdev_state_get_format(sd_state, > - MIPID02_SINK_0); > + MIPID02_SINK_0); > > /* but code may need to be converted */ > format->format.code = serial_to_parallel_code(format->format.code); > diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > index 117912d3bfbd..96353648c032 100644 > --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > @@ -319,7 +319,7 @@ static void rkisp1_isp_start(struct rkisp1_isp *isp, > rkisp1_write(rkisp1, RKISP1_CIF_ISP_CTRL, val); > > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_info = rkisp1_mbus_info_get_by_code(src_fmt->code); > > if (src_info->pixel_enc != V4L2_PIXEL_ENC_BAYER) > @@ -475,9 +475,9 @@ static void rkisp1_isp_set_src_fmt(struct rkisp1_isp *isp, > sink_fmt = v4l2_subdev_state_get_format(sd_state, > RKISP1_ISP_PAD_SINK_VIDEO); > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_crop = v4l2_subdev_state_get_crop(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > > /* > * Media bus code. The ISP can operate in pass-through mode (Bayer in, Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-10-13 07:37:10 +00:00
framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
*framefmt = fmt->format;
} else if (imx334->cur_mode != mode || imx334->cur_code != fmt->format.code) {
imx334->cur_code = fmt->format.code;
ret = imx334_update_controls(imx334, mode);
if (!ret)
imx334->cur_mode = mode;
}
mutex_unlock(&imx334->mutex);
return ret;
}
/**
* imx334_init_state() - Initialize sub-device state
* @sd: pointer to imx334 V4L2 sub-device structure
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
* @sd_state: V4L2 sub-device state
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_init_state(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state)
{
struct imx334 *imx334 = to_imx334(sd);
struct v4l2_subdev_format fmt = { 0 };
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
mutex_lock(&imx334->mutex);
imx334_fill_pad_format(imx334, imx334->cur_mode, &fmt);
__v4l2_ctrl_modify_range(imx334->link_freq_ctrl, 0,
__fls(imx334->link_freq_bitmap),
~(imx334->link_freq_bitmap),
__ffs(imx334->link_freq_bitmap));
mutex_unlock(&imx334->mutex);
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
return imx334_set_pad_format(sd, sd_state, &fmt);
}
static int imx334_set_framefmt(struct imx334 *imx334)
{
switch (imx334->cur_code) {
case MEDIA_BUS_FMT_SRGGB10_1X10:
return imx334_write_regs(imx334, raw10_framefmt_regs,
ARRAY_SIZE(raw10_framefmt_regs));
case MEDIA_BUS_FMT_SRGGB12_1X12:
return imx334_write_regs(imx334, raw12_framefmt_regs,
ARRAY_SIZE(raw12_framefmt_regs));
}
return -EINVAL;
}
/**
* imx334_start_streaming() - Start sensor stream
* @imx334: pointer to imx334 device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_start_streaming(struct imx334 *imx334)
{
const struct imx334_reg_list *reg_list;
int ret;
/* Write sensor mode registers */
reg_list = &imx334->cur_mode->reg_list;
ret = imx334_write_regs(imx334, reg_list->regs,
reg_list->num_of_regs);
if (ret) {
dev_err(imx334->dev, "fail to write initial registers");
return ret;
}
ret = imx334_set_framefmt(imx334);
if (ret) {
dev_err(imx334->dev, "%s failed to set frame format: %d\n",
__func__, ret);
return ret;
}
/* Setup handler will write actual exposure and gain */
ret = __v4l2_ctrl_handler_setup(imx334->sd.ctrl_handler);
if (ret) {
dev_err(imx334->dev, "fail to setup handler");
return ret;
}
/* Start streaming */
ret = imx334_write_reg(imx334, IMX334_REG_MODE_SELECT,
1, IMX334_MODE_STREAMING);
if (ret) {
dev_err(imx334->dev, "fail to start streaming");
return ret;
}
return 0;
}
/**
* imx334_stop_streaming() - Stop sensor stream
* @imx334: pointer to imx334 device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_stop_streaming(struct imx334 *imx334)
{
return imx334_write_reg(imx334, IMX334_REG_MODE_SELECT,
1, IMX334_MODE_STANDBY);
}
/**
* imx334_set_stream() - Enable sensor streaming
* @sd: pointer to imx334 subdevice
* @enable: set to enable sensor streaming
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_set_stream(struct v4l2_subdev *sd, int enable)
{
struct imx334 *imx334 = to_imx334(sd);
int ret;
mutex_lock(&imx334->mutex);
if (enable) {
ret = pm_runtime_resume_and_get(imx334->dev);
if (ret < 0)
goto error_unlock;
ret = imx334_start_streaming(imx334);
if (ret)
goto error_power_off;
} else {
imx334_stop_streaming(imx334);
pm_runtime_put(imx334->dev);
}
mutex_unlock(&imx334->mutex);
return 0;
error_power_off:
pm_runtime_put(imx334->dev);
error_unlock:
mutex_unlock(&imx334->mutex);
return ret;
}
/**
* imx334_detect() - Detect imx334 sensor
* @imx334: pointer to imx334 device
*
* Return: 0 if successful, -EIO if sensor id does not match
*/
static int imx334_detect(struct imx334 *imx334)
{
int ret;
u32 val;
ret = imx334_read_reg(imx334, IMX334_REG_ID, 2, &val);
if (ret)
return ret;
if (val != IMX334_ID) {
dev_err(imx334->dev, "chip id mismatch: %x!=%x",
IMX334_ID, val);
return -ENXIO;
}
return 0;
}
/**
* imx334_parse_hw_config() - Parse HW configuration and check if supported
* @imx334: pointer to imx334 device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_parse_hw_config(struct imx334 *imx334)
{
struct fwnode_handle *fwnode = dev_fwnode(imx334->dev);
struct v4l2_fwnode_endpoint bus_cfg = {
.bus_type = V4L2_MBUS_CSI2_DPHY
};
struct fwnode_handle *ep;
unsigned long rate;
int ret;
if (!fwnode)
return -ENXIO;
/* Request optional reset pin */
imx334->reset_gpio = devm_gpiod_get_optional(imx334->dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(imx334->reset_gpio)) {
dev_err(imx334->dev, "failed to get reset gpio %ld",
PTR_ERR(imx334->reset_gpio));
return PTR_ERR(imx334->reset_gpio);
}
/* Get sensor input clock */
imx334->inclk = devm_clk_get(imx334->dev, NULL);
if (IS_ERR(imx334->inclk)) {
dev_err(imx334->dev, "could not get inclk");
return PTR_ERR(imx334->inclk);
}
rate = clk_get_rate(imx334->inclk);
if (rate != IMX334_INCLK_RATE) {
dev_err(imx334->dev, "inclk frequency mismatch");
return -EINVAL;
}
ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
if (!ep)
return -ENXIO;
ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
fwnode_handle_put(ep);
if (ret)
return ret;
if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX334_NUM_DATA_LANES) {
dev_err(imx334->dev,
"number of CSI2 data lanes %d is not supported",
bus_cfg.bus.mipi_csi2.num_data_lanes);
ret = -EINVAL;
goto done_endpoint_free;
}
ret = v4l2_link_freq_to_bitmap(imx334->dev, bus_cfg.link_frequencies,
bus_cfg.nr_of_link_frequencies,
link_freq, ARRAY_SIZE(link_freq),
&imx334->link_freq_bitmap);
done_endpoint_free:
v4l2_fwnode_endpoint_free(&bus_cfg);
return ret;
}
/* V4l2 subdevice ops */
static const struct v4l2_subdev_video_ops imx334_video_ops = {
.s_stream = imx334_set_stream,
};
static const struct v4l2_subdev_pad_ops imx334_pad_ops = {
.enum_mbus_code = imx334_enum_mbus_code,
.enum_frame_size = imx334_enum_frame_size,
.get_fmt = imx334_get_pad_format,
.set_fmt = imx334_set_pad_format,
};
static const struct v4l2_subdev_ops imx334_subdev_ops = {
.video = &imx334_video_ops,
.pad = &imx334_pad_ops,
};
static const struct v4l2_subdev_internal_ops imx334_internal_ops = {
.init_state = imx334_init_state,
};
/**
* imx334_power_on() - Sensor power on sequence
* @dev: pointer to i2c device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_power_on(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct imx334 *imx334 = to_imx334(sd);
int ret;
gpiod_set_value_cansleep(imx334->reset_gpio, 1);
ret = clk_prepare_enable(imx334->inclk);
if (ret) {
dev_err(imx334->dev, "fail to enable inclk");
goto error_reset;
}
usleep_range(18000, 20000);
return 0;
error_reset:
gpiod_set_value_cansleep(imx334->reset_gpio, 0);
return ret;
}
/**
* imx334_power_off() - Sensor power off sequence
* @dev: pointer to i2c device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_power_off(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct imx334 *imx334 = to_imx334(sd);
gpiod_set_value_cansleep(imx334->reset_gpio, 0);
clk_disable_unprepare(imx334->inclk);
return 0;
}
/**
* imx334_init_controls() - Initialize sensor subdevice controls
* @imx334: pointer to imx334 device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_init_controls(struct imx334 *imx334)
{
struct v4l2_ctrl_handler *ctrl_hdlr = &imx334->ctrl_handler;
const struct imx334_mode *mode = imx334->cur_mode;
u32 lpfr;
int ret;
ret = v4l2_ctrl_handler_init(ctrl_hdlr, 7);
if (ret)
return ret;
/* Serialize controls with sensor device */
ctrl_hdlr->lock = &imx334->mutex;
/* Initialize exposure and gain */
lpfr = mode->vblank + mode->height;
imx334->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx334_ctrl_ops,
V4L2_CID_EXPOSURE,
IMX334_EXPOSURE_MIN,
lpfr - IMX334_EXPOSURE_OFFSET,
IMX334_EXPOSURE_STEP,
IMX334_EXPOSURE_DEFAULT);
imx334->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx334_ctrl_ops,
V4L2_CID_ANALOGUE_GAIN,
IMX334_AGAIN_MIN,
IMX334_AGAIN_MAX,
IMX334_AGAIN_STEP,
IMX334_AGAIN_DEFAULT);
v4l2_ctrl_cluster(2, &imx334->exp_ctrl);
imx334->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx334_ctrl_ops,
V4L2_CID_VBLANK,
mode->vblank_min,
mode->vblank_max,
1, mode->vblank);
/* Read only controls */
imx334->pclk_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx334_ctrl_ops,
V4L2_CID_PIXEL_RATE,
mode->pclk, mode->pclk,
1, mode->pclk);
imx334->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr,
&imx334_ctrl_ops,
V4L2_CID_LINK_FREQ,
__fls(imx334->link_freq_bitmap),
__ffs(imx334->link_freq_bitmap),
link_freq);
if (imx334->link_freq_ctrl)
imx334->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
imx334->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx334_ctrl_ops,
V4L2_CID_HBLANK,
IMX334_REG_MIN,
IMX334_REG_MAX,
1, mode->hblank);
if (imx334->hblank_ctrl)
imx334->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx334_ctrl_ops,
V4L2_CID_TEST_PATTERN,
ARRAY_SIZE(imx334_test_pattern_menu) - 1,
0, 0, imx334_test_pattern_menu);
if (ctrl_hdlr->error) {
dev_err(imx334->dev, "control init failed: %d",
ctrl_hdlr->error);
v4l2_ctrl_handler_free(ctrl_hdlr);
return ctrl_hdlr->error;
}
imx334->sd.ctrl_handler = ctrl_hdlr;
return 0;
}
/**
* imx334_probe() - I2C client device binding
* @client: pointer to i2c client device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx334_probe(struct i2c_client *client)
{
struct imx334 *imx334;
int ret;
imx334 = devm_kzalloc(&client->dev, sizeof(*imx334), GFP_KERNEL);
if (!imx334)
return -ENOMEM;
imx334->dev = &client->dev;
/* Initialize subdev */
v4l2_i2c_subdev_init(&imx334->sd, client, &imx334_subdev_ops);
imx334->sd.internal_ops = &imx334_internal_ops;
ret = imx334_parse_hw_config(imx334);
if (ret) {
dev_err(imx334->dev, "HW configuration is not supported");
return ret;
}
mutex_init(&imx334->mutex);
ret = imx334_power_on(imx334->dev);
if (ret) {
dev_err(imx334->dev, "failed to power-on the sensor");
goto error_mutex_destroy;
}
/* Check module identity */
ret = imx334_detect(imx334);
if (ret) {
dev_err(imx334->dev, "failed to find sensor: %d", ret);
goto error_power_off;
}
/* Set default mode to max resolution */
imx334->cur_mode = &supported_modes[__ffs(imx334->link_freq_bitmap)];
imx334->cur_code = imx334_mbus_codes[0];
imx334->vblank = imx334->cur_mode->vblank;
ret = imx334_init_controls(imx334);
if (ret) {
dev_err(imx334->dev, "failed to init controls: %d", ret);
goto error_power_off;
}
/* Initialize subdev */
imx334->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
imx334->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
/* Initialize source pad */
imx334->pad.flags = MEDIA_PAD_FL_SOURCE;
ret = media_entity_pads_init(&imx334->sd.entity, 1, &imx334->pad);
if (ret) {
dev_err(imx334->dev, "failed to init entity pads: %d", ret);
goto error_handler_free;
}
ret = v4l2_async_register_subdev_sensor(&imx334->sd);
if (ret < 0) {
dev_err(imx334->dev,
"failed to register async subdev: %d", ret);
goto error_media_entity;
}
pm_runtime_set_active(imx334->dev);
pm_runtime_enable(imx334->dev);
pm_runtime_idle(imx334->dev);
return 0;
error_media_entity:
media_entity_cleanup(&imx334->sd.entity);
error_handler_free:
v4l2_ctrl_handler_free(imx334->sd.ctrl_handler);
error_power_off:
imx334_power_off(imx334->dev);
error_mutex_destroy:
mutex_destroy(&imx334->mutex);
return ret;
}
/**
* imx334_remove() - I2C client device unbinding
* @client: pointer to I2C client device
*
* Return: 0 if successful, error code otherwise.
*/
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 08:02:30 +00:00
static void imx334_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct imx334 *imx334 = to_imx334(sd);
v4l2_async_unregister_subdev(sd);
media_entity_cleanup(&sd->entity);
v4l2_ctrl_handler_free(sd->ctrl_handler);
pm_runtime_disable(&client->dev);
pm_runtime_suspended(&client->dev);
mutex_destroy(&imx334->mutex);
}
static const struct dev_pm_ops imx334_pm_ops = {
SET_RUNTIME_PM_OPS(imx334_power_off, imx334_power_on, NULL)
};
static const struct of_device_id imx334_of_match[] = {
{ .compatible = "sony,imx334" },
{ }
};
MODULE_DEVICE_TABLE(of, imx334_of_match);
static struct i2c_driver imx334_driver = {
.probe = imx334_probe,
.remove = imx334_remove,
.driver = {
.name = "imx334",
.pm = &imx334_pm_ops,
.of_match_table = imx334_of_match,
},
};
module_i2c_driver(imx334_driver);
MODULE_DESCRIPTION("Sony imx334 sensor driver");
MODULE_LICENSE("GPL");