linux-stable/fs/dlm/recover.c

852 lines
21 KiB
C
Raw Normal View History

/******************************************************************************
*******************************************************************************
**
** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
** Copyright (C) 2004-2005 Red Hat, Inc. All rights reserved.
**
** This copyrighted material is made available to anyone wishing to use,
** modify, copy, or redistribute it subject to the terms and conditions
** of the GNU General Public License v.2.
**
*******************************************************************************
******************************************************************************/
#include "dlm_internal.h"
#include "lockspace.h"
#include "dir.h"
#include "config.h"
#include "ast.h"
#include "memory.h"
#include "rcom.h"
#include "lock.h"
#include "lowcomms.h"
#include "member.h"
#include "recover.h"
/*
* Recovery waiting routines: these functions wait for a particular reply from
* a remote node, or for the remote node to report a certain status. They need
* to abort if the lockspace is stopped indicating a node has failed (perhaps
* the one being waited for).
*/
/*
* Wait until given function returns non-zero or lockspace is stopped
* (LS_RECOVERY_STOP set due to failure of a node in ls_nodes). When another
* function thinks it could have completed the waited-on task, they should wake
* up ls_wait_general to get an immediate response rather than waiting for the
* timer to detect the result. A timer wakes us up periodically while waiting
* to see if we should abort due to a node failure. This should only be called
* by the dlm_recoverd thread.
*/
static void dlm_wait_timer_fn(unsigned long data)
{
struct dlm_ls *ls = (struct dlm_ls *) data;
mod_timer(&ls->ls_timer, jiffies + (dlm_config.ci_recover_timer * HZ));
wake_up(&ls->ls_wait_general);
}
int dlm_wait_function(struct dlm_ls *ls, int (*testfn) (struct dlm_ls *ls))
{
int error = 0;
init_timer(&ls->ls_timer);
ls->ls_timer.function = dlm_wait_timer_fn;
ls->ls_timer.data = (long) ls;
ls->ls_timer.expires = jiffies + (dlm_config.ci_recover_timer * HZ);
add_timer(&ls->ls_timer);
wait_event(ls->ls_wait_general, testfn(ls) || dlm_recovery_stopped(ls));
del_timer_sync(&ls->ls_timer);
if (dlm_recovery_stopped(ls)) {
log_debug(ls, "dlm_wait_function aborted");
error = -EINTR;
}
return error;
}
/*
* An efficient way for all nodes to wait for all others to have a certain
* status. The node with the lowest nodeid polls all the others for their
* status (wait_status_all) and all the others poll the node with the low id
* for its accumulated result (wait_status_low). When all nodes have set
* status flag X, then status flag X_ALL will be set on the low nodeid.
*/
uint32_t dlm_recover_status(struct dlm_ls *ls)
{
uint32_t status;
spin_lock(&ls->ls_recover_lock);
status = ls->ls_recover_status;
spin_unlock(&ls->ls_recover_lock);
return status;
}
static void _set_recover_status(struct dlm_ls *ls, uint32_t status)
{
ls->ls_recover_status |= status;
}
void dlm_set_recover_status(struct dlm_ls *ls, uint32_t status)
{
spin_lock(&ls->ls_recover_lock);
_set_recover_status(ls, status);
spin_unlock(&ls->ls_recover_lock);
}
static int wait_status_all(struct dlm_ls *ls, uint32_t wait_status,
int save_slots)
{
struct dlm_rcom *rc = ls->ls_recover_buf;
struct dlm_member *memb;
int error = 0, delay;
list_for_each_entry(memb, &ls->ls_nodes, list) {
delay = 0;
for (;;) {
if (dlm_recovery_stopped(ls)) {
error = -EINTR;
goto out;
}
error = dlm_rcom_status(ls, memb->nodeid, 0);
if (error)
goto out;
if (save_slots)
dlm_slot_save(ls, rc, memb);
if (rc->rc_result & wait_status)
break;
if (delay < 1000)
delay += 20;
msleep(delay);
}
}
out:
return error;
}
static int wait_status_low(struct dlm_ls *ls, uint32_t wait_status,
uint32_t status_flags)
{
struct dlm_rcom *rc = ls->ls_recover_buf;
int error = 0, delay = 0, nodeid = ls->ls_low_nodeid;
for (;;) {
if (dlm_recovery_stopped(ls)) {
error = -EINTR;
goto out;
}
error = dlm_rcom_status(ls, nodeid, status_flags);
if (error)
break;
if (rc->rc_result & wait_status)
break;
if (delay < 1000)
delay += 20;
msleep(delay);
}
out:
return error;
}
static int wait_status(struct dlm_ls *ls, uint32_t status)
{
uint32_t status_all = status << 1;
int error;
if (ls->ls_low_nodeid == dlm_our_nodeid()) {
error = wait_status_all(ls, status, 0);
if (!error)
dlm_set_recover_status(ls, status_all);
} else
error = wait_status_low(ls, status_all, 0);
return error;
}
int dlm_recover_members_wait(struct dlm_ls *ls)
{
struct dlm_member *memb;
struct dlm_slot *slots;
int num_slots, slots_size;
int error, rv;
uint32_t gen;
list_for_each_entry(memb, &ls->ls_nodes, list) {
memb->slot = -1;
memb->generation = 0;
}
if (ls->ls_low_nodeid == dlm_our_nodeid()) {
error = wait_status_all(ls, DLM_RS_NODES, 1);
if (error)
goto out;
/* slots array is sparse, slots_size may be > num_slots */
rv = dlm_slots_assign(ls, &num_slots, &slots_size, &slots, &gen);
if (!rv) {
spin_lock(&ls->ls_recover_lock);
_set_recover_status(ls, DLM_RS_NODES_ALL);
ls->ls_num_slots = num_slots;
ls->ls_slots_size = slots_size;
ls->ls_slots = slots;
ls->ls_generation = gen;
spin_unlock(&ls->ls_recover_lock);
} else {
dlm_set_recover_status(ls, DLM_RS_NODES_ALL);
}
} else {
error = wait_status_low(ls, DLM_RS_NODES_ALL, DLM_RSF_NEED_SLOTS);
if (error)
goto out;
dlm_slots_copy_in(ls);
}
out:
return error;
}
int dlm_recover_directory_wait(struct dlm_ls *ls)
{
return wait_status(ls, DLM_RS_DIR);
}
int dlm_recover_locks_wait(struct dlm_ls *ls)
{
return wait_status(ls, DLM_RS_LOCKS);
}
int dlm_recover_done_wait(struct dlm_ls *ls)
{
return wait_status(ls, DLM_RS_DONE);
}
/*
* The recover_list contains all the rsb's for which we've requested the new
* master nodeid. As replies are returned from the resource directories the
* rsb's are removed from the list. When the list is empty we're done.
*
* The recover_list is later similarly used for all rsb's for which we've sent
* new lkb's and need to receive new corresponding lkid's.
*
* We use the address of the rsb struct as a simple local identifier for the
* rsb so we can match an rcom reply with the rsb it was sent for.
*/
static int recover_list_empty(struct dlm_ls *ls)
{
int empty;
spin_lock(&ls->ls_recover_list_lock);
empty = list_empty(&ls->ls_recover_list);
spin_unlock(&ls->ls_recover_list_lock);
return empty;
}
static void recover_list_add(struct dlm_rsb *r)
{
struct dlm_ls *ls = r->res_ls;
spin_lock(&ls->ls_recover_list_lock);
if (list_empty(&r->res_recover_list)) {
list_add_tail(&r->res_recover_list, &ls->ls_recover_list);
ls->ls_recover_list_count++;
dlm_hold_rsb(r);
}
spin_unlock(&ls->ls_recover_list_lock);
}
static void recover_list_del(struct dlm_rsb *r)
{
struct dlm_ls *ls = r->res_ls;
spin_lock(&ls->ls_recover_list_lock);
list_del_init(&r->res_recover_list);
ls->ls_recover_list_count--;
spin_unlock(&ls->ls_recover_list_lock);
dlm_put_rsb(r);
}
static struct dlm_rsb *recover_list_find(struct dlm_ls *ls, uint64_t id)
{
struct dlm_rsb *r = NULL;
spin_lock(&ls->ls_recover_list_lock);
list_for_each_entry(r, &ls->ls_recover_list, res_recover_list) {
if (id == (unsigned long) r)
goto out;
}
r = NULL;
out:
spin_unlock(&ls->ls_recover_list_lock);
return r;
}
static void recover_list_clear(struct dlm_ls *ls)
{
struct dlm_rsb *r, *s;
spin_lock(&ls->ls_recover_list_lock);
list_for_each_entry_safe(r, s, &ls->ls_recover_list, res_recover_list) {
list_del_init(&r->res_recover_list);
r->res_recover_locks_count = 0;
dlm_put_rsb(r);
ls->ls_recover_list_count--;
}
if (ls->ls_recover_list_count != 0) {
log_error(ls, "warning: recover_list_count %d",
ls->ls_recover_list_count);
ls->ls_recover_list_count = 0;
}
spin_unlock(&ls->ls_recover_list_lock);
}
/* Master recovery: find new master node for rsb's that were
mastered on nodes that have been removed.
dlm_recover_masters
recover_master
dlm_send_rcom_lookup -> receive_rcom_lookup
dlm_dir_lookup
receive_rcom_lookup_reply <-
dlm_recover_master_reply
set_new_master
set_master_lkbs
set_lock_master
*/
/*
* Set the lock master for all LKBs in a lock queue
* If we are the new master of the rsb, we may have received new
* MSTCPY locks from other nodes already which we need to ignore
* when setting the new nodeid.
*/
static void set_lock_master(struct list_head *queue, int nodeid)
{
struct dlm_lkb *lkb;
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
list_for_each_entry(lkb, queue, lkb_statequeue) {
if (!(lkb->lkb_flags & DLM_IFL_MSTCPY)) {
lkb->lkb_nodeid = nodeid;
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
lkb->lkb_remid = 0;
}
}
}
static void set_master_lkbs(struct dlm_rsb *r)
{
set_lock_master(&r->res_grantqueue, r->res_nodeid);
set_lock_master(&r->res_convertqueue, r->res_nodeid);
set_lock_master(&r->res_waitqueue, r->res_nodeid);
}
/*
* Propagate the new master nodeid to locks
* The NEW_MASTER flag tells dlm_recover_locks() which rsb's to consider.
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
* The NEW_MASTER2 flag tells recover_lvb() and recover_grant() which
* rsb's to consider.
*/
static void set_new_master(struct dlm_rsb *r, int nodeid)
{
r->res_nodeid = nodeid;
set_master_lkbs(r);
rsb_set_flag(r, RSB_NEW_MASTER);
rsb_set_flag(r, RSB_NEW_MASTER2);
}
/*
* We do async lookups on rsb's that need new masters. The rsb's
* waiting for a lookup reply are kept on the recover_list.
*/
static int recover_master(struct dlm_rsb *r)
{
struct dlm_ls *ls = r->res_ls;
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
int error, ret_nodeid;
int our_nodeid = dlm_our_nodeid();
int dir_nodeid = dlm_dir_nodeid(r);
if (dir_nodeid == our_nodeid) {
error = dlm_dir_lookup(ls, our_nodeid, r->res_name,
r->res_length, &ret_nodeid);
if (error)
log_error(ls, "recover dir lookup error %d", error);
if (ret_nodeid == our_nodeid)
ret_nodeid = 0;
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
lock_rsb(r);
set_new_master(r, ret_nodeid);
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
unlock_rsb(r);
} else {
recover_list_add(r);
error = dlm_send_rcom_lookup(r, dir_nodeid);
}
return error;
}
/*
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
* All MSTCPY locks are purged and rebuilt, even if the master stayed the same.
* This is necessary because recovery can be started, aborted and restarted,
* causing the master nodeid to briefly change during the aborted recovery, and
* change back to the original value in the second recovery. The MSTCPY locks
* may or may not have been purged during the aborted recovery. Another node
* with an outstanding request in waiters list and a request reply saved in the
* requestqueue, cannot know whether it should ignore the reply and resend the
* request, or accept the reply and complete the request. It must do the
* former if the remote node purged MSTCPY locks, and it must do the later if
* the remote node did not. This is solved by always purging MSTCPY locks, in
* which case, the request reply would always be ignored and the request
* resent.
*/
static int recover_master_static(struct dlm_rsb *r)
{
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
int dir_nodeid = dlm_dir_nodeid(r);
int new_master = dir_nodeid;
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
if (dir_nodeid == dlm_our_nodeid())
new_master = 0;
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
lock_rsb(r);
dlm_purge_mstcpy_locks(r);
set_new_master(r, new_master);
unlock_rsb(r);
return 1;
}
/*
* Go through local root resources and for each rsb which has a master which
* has departed, get the new master nodeid from the directory. The dir will
* assign mastery to the first node to look up the new master. That means
* we'll discover in this lookup if we're the new master of any rsb's.
*
* We fire off all the dir lookup requests individually and asynchronously to
* the correct dir node.
*/
int dlm_recover_masters(struct dlm_ls *ls)
{
struct dlm_rsb *r;
int error = 0, count = 0;
log_debug(ls, "dlm_recover_masters");
down_read(&ls->ls_root_sem);
list_for_each_entry(r, &ls->ls_root_list, res_root_list) {
if (dlm_recovery_stopped(ls)) {
up_read(&ls->ls_root_sem);
error = -EINTR;
goto out;
}
if (dlm_no_directory(ls))
count += recover_master_static(r);
[DLM] fix master recovery If master recovery happens on an rsb in one recovery sequence, then that sequence is aborted before lock recovery happens, then in the next sequence, we rely on the previous master recovery (which may now be invalid due to another node ignoring a lookup result) and go on do to the lock recovery where we get stuck due to an invalid master value. recovery cycle begins: master of rsb X has left nodes A and B send node C an rcom lookup for X to find the new master C gets lookup from B first, sets B as new master, and sends reply back to B C gets lookup from A next, and sends reply back to A saying B is master A gets lookup reply from C and sets B as the new master in the rsb recovery cycle on A, B and C is aborted to start a new recovery B gets lookup reply from C and ignores it since there's a new recovery recovery cycle begins: some other node has joined B doesn't think it's the master of X so it doesn't rebuild it in the directory C looks up the master of X, no one is master, so it becomes new master B looks up the master of X, finds it's C A believes that B is the master of X, so it sends its lock to B B sends an error back to A A resends this repeats forever, the incorrect master value on A is never corrected The fix is to do master recovery on an rsb that still has the NEW_MASTER flag set from an earlier recovery sequence, and therefore didn't complete lock recovery. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-01-15 16:28:22 +00:00
else if (!is_master(r) &&
(dlm_is_removed(ls, r->res_nodeid) ||
rsb_flag(r, RSB_NEW_MASTER))) {
recover_master(r);
count++;
}
schedule();
}
up_read(&ls->ls_root_sem);
log_debug(ls, "dlm_recover_masters %d resources", count);
error = dlm_wait_function(ls, &recover_list_empty);
out:
if (error)
recover_list_clear(ls);
return error;
}
int dlm_recover_master_reply(struct dlm_ls *ls, struct dlm_rcom *rc)
{
struct dlm_rsb *r;
int nodeid;
r = recover_list_find(ls, rc->rc_id);
if (!r) {
log_error(ls, "dlm_recover_master_reply no id %llx",
(unsigned long long)rc->rc_id);
goto out;
}
nodeid = rc->rc_result;
if (nodeid == dlm_our_nodeid())
nodeid = 0;
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
lock_rsb(r);
set_new_master(r, nodeid);
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
unlock_rsb(r);
recover_list_del(r);
if (recover_list_empty(ls))
wake_up(&ls->ls_wait_general);
out:
return 0;
}
/* Lock recovery: rebuild the process-copy locks we hold on a
remastered rsb on the new rsb master.
dlm_recover_locks
recover_locks
recover_locks_queue
dlm_send_rcom_lock -> receive_rcom_lock
dlm_recover_master_copy
receive_rcom_lock_reply <-
dlm_recover_process_copy
*/
/*
* keep a count of the number of lkb's we send to the new master; when we get
* an equal number of replies then recovery for the rsb is done
*/
static int recover_locks_queue(struct dlm_rsb *r, struct list_head *head)
{
struct dlm_lkb *lkb;
int error = 0;
list_for_each_entry(lkb, head, lkb_statequeue) {
error = dlm_send_rcom_lock(r, lkb);
if (error)
break;
r->res_recover_locks_count++;
}
return error;
}
static int recover_locks(struct dlm_rsb *r)
{
int error = 0;
lock_rsb(r);
DLM_ASSERT(!r->res_recover_locks_count, dlm_dump_rsb(r););
error = recover_locks_queue(r, &r->res_grantqueue);
if (error)
goto out;
error = recover_locks_queue(r, &r->res_convertqueue);
if (error)
goto out;
error = recover_locks_queue(r, &r->res_waitqueue);
if (error)
goto out;
if (r->res_recover_locks_count)
recover_list_add(r);
else
rsb_clear_flag(r, RSB_NEW_MASTER);
out:
unlock_rsb(r);
return error;
}
int dlm_recover_locks(struct dlm_ls *ls)
{
struct dlm_rsb *r;
int error, count = 0;
down_read(&ls->ls_root_sem);
list_for_each_entry(r, &ls->ls_root_list, res_root_list) {
if (is_master(r)) {
rsb_clear_flag(r, RSB_NEW_MASTER);
continue;
}
if (!rsb_flag(r, RSB_NEW_MASTER))
continue;
if (dlm_recovery_stopped(ls)) {
error = -EINTR;
up_read(&ls->ls_root_sem);
goto out;
}
error = recover_locks(r);
if (error) {
up_read(&ls->ls_root_sem);
goto out;
}
count += r->res_recover_locks_count;
}
up_read(&ls->ls_root_sem);
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
log_debug(ls, "dlm_recover_locks %d out", count);
error = dlm_wait_function(ls, &recover_list_empty);
out:
if (error)
recover_list_clear(ls);
return error;
}
void dlm_recovered_lock(struct dlm_rsb *r)
{
DLM_ASSERT(rsb_flag(r, RSB_NEW_MASTER), dlm_dump_rsb(r););
r->res_recover_locks_count--;
if (!r->res_recover_locks_count) {
rsb_clear_flag(r, RSB_NEW_MASTER);
recover_list_del(r);
}
if (recover_list_empty(r->res_ls))
wake_up(&r->res_ls->ls_wait_general);
}
/*
* The lvb needs to be recovered on all master rsb's. This includes setting
* the VALNOTVALID flag if necessary, and determining the correct lvb contents
* based on the lvb's of the locks held on the rsb.
*
* RSB_VALNOTVALID is set if there are only NL/CR locks on the rsb. If it
* was already set prior to recovery, it's not cleared, regardless of locks.
*
* The LVB contents are only considered for changing when this is a new master
* of the rsb (NEW_MASTER2). Then, the rsb's lvb is taken from any lkb with
* mode > CR. If no lkb's exist with mode above CR, the lvb contents are taken
* from the lkb with the largest lvb sequence number.
*/
static void recover_lvb(struct dlm_rsb *r)
{
struct dlm_lkb *lkb, *high_lkb = NULL;
uint32_t high_seq = 0;
int lock_lvb_exists = 0;
int big_lock_exists = 0;
int lvblen = r->res_ls->ls_lvblen;
list_for_each_entry(lkb, &r->res_grantqueue, lkb_statequeue) {
if (!(lkb->lkb_exflags & DLM_LKF_VALBLK))
continue;
lock_lvb_exists = 1;
if (lkb->lkb_grmode > DLM_LOCK_CR) {
big_lock_exists = 1;
goto setflag;
}
if (((int)lkb->lkb_lvbseq - (int)high_seq) >= 0) {
high_lkb = lkb;
high_seq = lkb->lkb_lvbseq;
}
}
list_for_each_entry(lkb, &r->res_convertqueue, lkb_statequeue) {
if (!(lkb->lkb_exflags & DLM_LKF_VALBLK))
continue;
lock_lvb_exists = 1;
if (lkb->lkb_grmode > DLM_LOCK_CR) {
big_lock_exists = 1;
goto setflag;
}
if (((int)lkb->lkb_lvbseq - (int)high_seq) >= 0) {
high_lkb = lkb;
high_seq = lkb->lkb_lvbseq;
}
}
setflag:
if (!lock_lvb_exists)
goto out;
if (!big_lock_exists)
rsb_set_flag(r, RSB_VALNOTVALID);
/* don't mess with the lvb unless we're the new master */
if (!rsb_flag(r, RSB_NEW_MASTER2))
goto out;
if (!r->res_lvbptr) {
r->res_lvbptr = dlm_allocate_lvb(r->res_ls);
if (!r->res_lvbptr)
goto out;
}
if (big_lock_exists) {
r->res_lvbseq = lkb->lkb_lvbseq;
memcpy(r->res_lvbptr, lkb->lkb_lvbptr, lvblen);
} else if (high_lkb) {
r->res_lvbseq = high_lkb->lkb_lvbseq;
memcpy(r->res_lvbptr, high_lkb->lkb_lvbptr, lvblen);
} else {
r->res_lvbseq = 0;
memset(r->res_lvbptr, 0, lvblen);
}
out:
return;
}
/* All master rsb's flagged RECOVER_CONVERT need to be looked at. The locks
converting PR->CW or CW->PR need to have their lkb_grmode set. */
static void recover_conversion(struct dlm_rsb *r)
{
struct dlm_lkb *lkb;
int grmode = -1;
list_for_each_entry(lkb, &r->res_grantqueue, lkb_statequeue) {
if (lkb->lkb_grmode == DLM_LOCK_PR ||
lkb->lkb_grmode == DLM_LOCK_CW) {
grmode = lkb->lkb_grmode;
break;
}
}
list_for_each_entry(lkb, &r->res_convertqueue, lkb_statequeue) {
if (lkb->lkb_grmode != DLM_LOCK_IV)
continue;
if (grmode == -1)
lkb->lkb_grmode = lkb->lkb_rqmode;
else
lkb->lkb_grmode = grmode;
}
}
/* We've become the new master for this rsb and waiting/converting locks may
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
need to be granted in dlm_recover_grant() due to locks that may have
existed from a removed node. */
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
static void recover_grant(struct dlm_rsb *r)
{
if (!list_empty(&r->res_waitqueue) || !list_empty(&r->res_convertqueue))
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
rsb_set_flag(r, RSB_RECOVER_GRANT);
}
void dlm_recover_rsbs(struct dlm_ls *ls)
{
struct dlm_rsb *r;
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
unsigned int count = 0;
down_read(&ls->ls_root_sem);
list_for_each_entry(r, &ls->ls_root_list, res_root_list) {
lock_rsb(r);
if (is_master(r)) {
if (rsb_flag(r, RSB_RECOVER_CONVERT))
recover_conversion(r);
if (rsb_flag(r, RSB_NEW_MASTER2))
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
recover_grant(r);
recover_lvb(r);
count++;
}
rsb_clear_flag(r, RSB_RECOVER_CONVERT);
rsb_clear_flag(r, RSB_NEW_MASTER2);
unlock_rsb(r);
}
up_read(&ls->ls_root_sem);
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-26 20:54:29 +00:00
if (count)
log_debug(ls, "dlm_recover_rsbs %d done", count);
}
/* Create a single list of all root rsb's to be used during recovery */
int dlm_create_root_list(struct dlm_ls *ls)
{
struct rb_node *n;
struct dlm_rsb *r;
int i, error = 0;
down_write(&ls->ls_root_sem);
if (!list_empty(&ls->ls_root_list)) {
log_error(ls, "root list not empty");
error = -EINVAL;
goto out;
}
for (i = 0; i < ls->ls_rsbtbl_size; i++) {
spin_lock(&ls->ls_rsbtbl[i].lock);
for (n = rb_first(&ls->ls_rsbtbl[i].keep); n; n = rb_next(n)) {
r = rb_entry(n, struct dlm_rsb, res_hashnode);
list_add(&r->res_root_list, &ls->ls_root_list);
dlm_hold_rsb(r);
}
/* If we're using a directory, add tossed rsbs to the root
list; they'll have entries created in the new directory,
but no other recovery steps should do anything with them. */
if (dlm_no_directory(ls)) {
spin_unlock(&ls->ls_rsbtbl[i].lock);
continue;
}
for (n = rb_first(&ls->ls_rsbtbl[i].toss); n; n = rb_next(n)) {
r = rb_entry(n, struct dlm_rsb, res_hashnode);
list_add(&r->res_root_list, &ls->ls_root_list);
dlm_hold_rsb(r);
}
spin_unlock(&ls->ls_rsbtbl[i].lock);
}
out:
up_write(&ls->ls_root_sem);
return error;
}
void dlm_release_root_list(struct dlm_ls *ls)
{
struct dlm_rsb *r, *safe;
down_write(&ls->ls_root_sem);
list_for_each_entry_safe(r, safe, &ls->ls_root_list, res_root_list) {
list_del_init(&r->res_root_list);
dlm_put_rsb(r);
}
up_write(&ls->ls_root_sem);
}
/* If not using a directory, clear the entire toss list, there's no benefit to
caching the master value since it's fixed. If we are using a dir, keep the
rsb's we're the master of. Recovery will add them to the root list and from
there they'll be entered in the rebuilt directory. */
void dlm_clear_toss_list(struct dlm_ls *ls)
{
struct rb_node *n, *next;
struct dlm_rsb *rsb;
int i;
for (i = 0; i < ls->ls_rsbtbl_size; i++) {
spin_lock(&ls->ls_rsbtbl[i].lock);
for (n = rb_first(&ls->ls_rsbtbl[i].toss); n; n = next) {
next = rb_next(n);;
rsb = rb_entry(n, struct dlm_rsb, res_hashnode);
if (dlm_no_directory(ls) || !is_master(rsb)) {
rb_erase(n, &ls->ls_rsbtbl[i].toss);
dlm_free_rsb(rsb);
}
}
spin_unlock(&ls->ls_rsbtbl[i].lock);
}
}