linux-stable/include/linux/livepatch.h

258 lines
8.2 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 13:51:43 +00:00
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* livepatch.h - Kernel Live Patching Core
*
* Copyright (C) 2014 Seth Jennings <sjenning@redhat.com>
* Copyright (C) 2014 SUSE
*/
#ifndef _LINUX_LIVEPATCH_H_
#define _LINUX_LIVEPATCH_H_
#include <linux/module.h>
#include <linux/ftrace.h>
livepatch: allow removal of a disabled patch Currently we do not allow patch module to unload since there is no method to determine if a task is still running in the patched code. The consistency model gives us the way because when the unpatching finishes we know that all tasks were marked as safe to call an original function. Thus every new call to the function calls the original code and at the same time no task can be somewhere in the patched code, because it had to leave that code to be marked as safe. We can safely let the patch module go after that. Completion is used for synchronization between module removal and sysfs infrastructure in a similar way to commit 942e443127e9 ("module: Fix mod->mkobj.kobj potentially freed too early"). Note that we still do not allow the removal for immediate model, that is no consistency model. The module refcount may increase in this case if somebody disables and enables the patch several times. This should not cause any harm. With this change a call to try_module_get() is moved to __klp_enable_patch from klp_register_patch to make module reference counting symmetric (module_put() is in a patch disable path) and to allow to take a new reference to a disabled module when being enabled. Finally, we need to be very careful about possible races between klp_unregister_patch(), kobject_put() functions and operations on the related sysfs files. kobject_put(&patch->kobj) must be called without klp_mutex. Otherwise, it might be blocked by enabled_store() that needs the mutex as well. In addition, enabled_store() must check if the patch was not unregisted in the meantime. There is no need to do the same for other kobject_put() callsites at the moment. Their sysfs operations neither take the lock nor they access any data that might be freed in the meantime. There was an attempt to use kobjects the right way and prevent these races by design. But it made the patch definition more complicated and opened another can of worms. See https://lkml.kernel.org/r/1464018848-4303-1-git-send-email-pmladek@suse.com [Thanks to Petr Mladek for improving the commit message.] Signed-off-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-06 17:20:29 +00:00
#include <linux/completion.h>
#include <linux/list.h>
#include <linux/livepatch_sched.h>
#if IS_ENABLED(CONFIG_LIVEPATCH)
livepatch: change to a per-task consistency model Change livepatch to use a basic per-task consistency model. This is the foundation which will eventually enable us to patch those ~10% of security patches which change function or data semantics. This is the biggest remaining piece needed to make livepatch more generally useful. This code stems from the design proposal made by Vojtech [1] in November 2014. It's a hybrid of kGraft and kpatch: it uses kGraft's per-task consistency and syscall barrier switching combined with kpatch's stack trace switching. There are also a number of fallback options which make it quite flexible. Patches are applied on a per-task basis, when the task is deemed safe to switch over. When a patch is enabled, livepatch enters into a transition state where tasks are converging to the patched state. Usually this transition state can complete in a few seconds. The same sequence occurs when a patch is disabled, except the tasks converge from the patched state to the unpatched state. An interrupt handler inherits the patched state of the task it interrupts. The same is true for forked tasks: the child inherits the patched state of the parent. Livepatch uses several complementary approaches to determine when it's safe to patch tasks: 1. The first and most effective approach is stack checking of sleeping tasks. If no affected functions are on the stack of a given task, the task is patched. In most cases this will patch most or all of the tasks on the first try. Otherwise it'll keep trying periodically. This option is only available if the architecture has reliable stacks (HAVE_RELIABLE_STACKTRACE). 2. The second approach, if needed, is kernel exit switching. A task is switched when it returns to user space from a system call, a user space IRQ, or a signal. It's useful in the following cases: a) Patching I/O-bound user tasks which are sleeping on an affected function. In this case you have to send SIGSTOP and SIGCONT to force it to exit the kernel and be patched. b) Patching CPU-bound user tasks. If the task is highly CPU-bound then it will get patched the next time it gets interrupted by an IRQ. c) In the future it could be useful for applying patches for architectures which don't yet have HAVE_RELIABLE_STACKTRACE. In this case you would have to signal most of the tasks on the system. However this isn't supported yet because there's currently no way to patch kthreads without HAVE_RELIABLE_STACKTRACE. 3. For idle "swapper" tasks, since they don't ever exit the kernel, they instead have a klp_update_patch_state() call in the idle loop which allows them to be patched before the CPU enters the idle state. (Note there's not yet such an approach for kthreads.) All the above approaches may be skipped by setting the 'immediate' flag in the 'klp_patch' struct, which will disable per-task consistency and patch all tasks immediately. This can be useful if the patch doesn't change any function or data semantics. Note that, even with this flag set, it's possible that some tasks may still be running with an old version of the function, until that function returns. There's also an 'immediate' flag in the 'klp_func' struct which allows you to specify that certain functions in the patch can be applied without per-task consistency. This might be useful if you want to patch a common function like schedule(), and the function change doesn't need consistency but the rest of the patch does. For architectures which don't have HAVE_RELIABLE_STACKTRACE, the user must set patch->immediate which causes all tasks to be patched immediately. This option should be used with care, only when the patch doesn't change any function or data semantics. In the future, architectures which don't have HAVE_RELIABLE_STACKTRACE may be allowed to use per-task consistency if we can come up with another way to patch kthreads. The /sys/kernel/livepatch/<patch>/transition file shows whether a patch is in transition. Only a single patch (the topmost patch on the stack) can be in transition at a given time. A patch can remain in transition indefinitely, if any of the tasks are stuck in the initial patch state. A transition can be reversed and effectively canceled by writing the opposite value to the /sys/kernel/livepatch/<patch>/enabled file while the transition is in progress. Then all the tasks will attempt to converge back to the original patch state. [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Ingo Molnar <mingo@kernel.org> # for the scheduler changes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14 01:42:40 +00:00
/* task patch states */
#define KLP_UNDEFINED -1
#define KLP_UNPATCHED 0
#define KLP_PATCHED 1
/**
* struct klp_func - function structure for live patching
* @old_name: name of the function to be patched
* @new_func: pointer to the patched function code
livepatch: add old_sympos as disambiguator field to klp_func Currently, patching objects with duplicate symbol names fail because the creation of the sysfs function directory collides with the previous attempt. Appending old_addr to the function name is problematic as it reveals the address of the function being patch to a normal user. Using the symbol's occurrence in kallsyms to postfix the function name in the sysfs directory solves the issue of having consistent unique names and ensuring that the address is not exposed to a normal user. In addition, using the symbol position as the user's method to disambiguate symbols instead of addr allows for disambiguating symbols in modules as well for both function addresses and for relocs. This also simplifies much of the code. Special handling for kASLR is no longer needed and can be removed. The klp_find_verify_func_addr function can be replaced by klp_find_object_symbol, and klp_verify_vmlinux_symbol and its callback can be removed completely. In cases of duplicate symbols, old_sympos will be used to disambiguate instead of old_addr. By default old_sympos will be 0, and patching will only succeed if the symbol is unique. Specifying a positive value will ensure that occurrence of the symbol in kallsyms for the patched object will be used for patching if it is valid. In addition, make old_addr an internal structure field not to be specified by the user. Finally, remove klp_find_verify_func_addr as it can be replaced by klp_find_object_symbol directly. Support for symbol position disambiguation for relocations is added in the next patch in this series. Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-02 02:40:54 +00:00
* @old_sympos: a hint indicating which symbol position the old function
* can be found (optional)
* @old_func: pointer to the function being patched
* @kobj: kobject for sysfs resources
* @node: list node for klp_object func_list
* @stack_node: list node for klp_ops func_stack list
* @old_size: size of the old function
* @new_size: size of the new function
livepatch: Add atomic replace Sometimes we would like to revert a particular fix. Currently, this is not easy because we want to keep all other fixes active and we could revert only the last applied patch. One solution would be to apply new patch that implemented all the reverted functions like in the original code. It would work as expected but there will be unnecessary redirections. In addition, it would also require knowing which functions need to be reverted at build time. Another problem is when there are many patches that touch the same functions. There might be dependencies between patches that are not enforced on the kernel side. Also it might be pretty hard to actually prepare the patch and ensure compatibility with the other patches. Atomic replace && cumulative patches: A better solution would be to create cumulative patch and say that it replaces all older ones. This patch adds a new "replace" flag to struct klp_patch. When it is enabled, a set of 'nop' klp_func will be dynamically created for all functions that are already being patched but that will no longer be modified by the new patch. They are used as a new target during the patch transition. The idea is to handle Nops' structures like the static ones. When the dynamic structures are allocated, we initialize all values that are normally statically defined. The only exception is "new_func" in struct klp_func. It has to point to the original function and the address is known only when the object (module) is loaded. Note that we really need to set it. The address is used, for example, in klp_check_stack_func(). Nevertheless we still need to distinguish the dynamically allocated structures in some operations. For this, we add "nop" flag into struct klp_func and "dynamic" flag into struct klp_object. They need special handling in the following situations: + The structures are added into the lists of objects and functions immediately. In fact, the lists were created for this purpose. + The address of the original function is known only when the patched object (module) is loaded. Therefore it is copied later in klp_init_object_loaded(). + The ftrace handler must not set PC to func->new_func. It would cause infinite loop because the address points back to the beginning of the original function. + The various free() functions must free the structure itself. Note that other ways to detect the dynamic structures are not considered safe. For example, even the statically defined struct klp_object might include empty funcs array. It might be there just to run some callbacks. Also note that the safe iterator must be used in the free() functions. Otherwise already freed structures might get accessed. Special callbacks handling: The callbacks from the replaced patches are _not_ called by intention. It would be pretty hard to define a reasonable semantic and implement it. It might even be counter-productive. The new patch is cumulative. It is supposed to include most of the changes from older patches. In most cases, it will not want to call pre_unpatch() post_unpatch() callbacks from the replaced patches. It would disable/break things for no good reasons. Also it should be easier to handle various scenarios in a single script in the new patch than think about interactions caused by running many scripts from older patches. Not to say that the old scripts even would not expect to be called in this situation. Removing replaced patches: One nice effect of the cumulative patches is that the code from the older patches is no longer used. Therefore the replaced patches can be removed. It has several advantages: + Nops' structs will no longer be necessary and might be removed. This would save memory, restore performance (no ftrace handler), allow clear view on what is really patched. + Disabling the patch will cause using the original code everywhere. Therefore the livepatch callbacks could handle only one scenario. Note that the complication is already complex enough when the patch gets enabled. It is currently solved by calling callbacks only from the new cumulative patch. + The state is clean in both the sysfs interface and lsmod. The modules with the replaced livepatches might even get removed from the system. Some people actually expected this behavior from the beginning. After all a cumulative patch is supposed to "completely" replace an existing one. It is like when a new version of an application replaces an older one. This patch does the first step. It removes the replaced patches from the list of patches. It is safe. The consistency model ensures that they are no longer used. By other words, each process works only with the structures from klp_transition_patch. The removal is done by a special function. It combines actions done by __disable_patch() and klp_complete_transition(). But it is a fast track without all the transaction-related stuff. Signed-off-by: Jason Baron <jbaron@akamai.com> [pmladek@suse.com: Split, reuse existing code, simplified] Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-09 12:43:25 +00:00
* @nop: temporary patch to use the original code again; dyn. allocated
* @patched: the func has been added to the klp_ops list
livepatch: change to a per-task consistency model Change livepatch to use a basic per-task consistency model. This is the foundation which will eventually enable us to patch those ~10% of security patches which change function or data semantics. This is the biggest remaining piece needed to make livepatch more generally useful. This code stems from the design proposal made by Vojtech [1] in November 2014. It's a hybrid of kGraft and kpatch: it uses kGraft's per-task consistency and syscall barrier switching combined with kpatch's stack trace switching. There are also a number of fallback options which make it quite flexible. Patches are applied on a per-task basis, when the task is deemed safe to switch over. When a patch is enabled, livepatch enters into a transition state where tasks are converging to the patched state. Usually this transition state can complete in a few seconds. The same sequence occurs when a patch is disabled, except the tasks converge from the patched state to the unpatched state. An interrupt handler inherits the patched state of the task it interrupts. The same is true for forked tasks: the child inherits the patched state of the parent. Livepatch uses several complementary approaches to determine when it's safe to patch tasks: 1. The first and most effective approach is stack checking of sleeping tasks. If no affected functions are on the stack of a given task, the task is patched. In most cases this will patch most or all of the tasks on the first try. Otherwise it'll keep trying periodically. This option is only available if the architecture has reliable stacks (HAVE_RELIABLE_STACKTRACE). 2. The second approach, if needed, is kernel exit switching. A task is switched when it returns to user space from a system call, a user space IRQ, or a signal. It's useful in the following cases: a) Patching I/O-bound user tasks which are sleeping on an affected function. In this case you have to send SIGSTOP and SIGCONT to force it to exit the kernel and be patched. b) Patching CPU-bound user tasks. If the task is highly CPU-bound then it will get patched the next time it gets interrupted by an IRQ. c) In the future it could be useful for applying patches for architectures which don't yet have HAVE_RELIABLE_STACKTRACE. In this case you would have to signal most of the tasks on the system. However this isn't supported yet because there's currently no way to patch kthreads without HAVE_RELIABLE_STACKTRACE. 3. For idle "swapper" tasks, since they don't ever exit the kernel, they instead have a klp_update_patch_state() call in the idle loop which allows them to be patched before the CPU enters the idle state. (Note there's not yet such an approach for kthreads.) All the above approaches may be skipped by setting the 'immediate' flag in the 'klp_patch' struct, which will disable per-task consistency and patch all tasks immediately. This can be useful if the patch doesn't change any function or data semantics. Note that, even with this flag set, it's possible that some tasks may still be running with an old version of the function, until that function returns. There's also an 'immediate' flag in the 'klp_func' struct which allows you to specify that certain functions in the patch can be applied without per-task consistency. This might be useful if you want to patch a common function like schedule(), and the function change doesn't need consistency but the rest of the patch does. For architectures which don't have HAVE_RELIABLE_STACKTRACE, the user must set patch->immediate which causes all tasks to be patched immediately. This option should be used with care, only when the patch doesn't change any function or data semantics. In the future, architectures which don't have HAVE_RELIABLE_STACKTRACE may be allowed to use per-task consistency if we can come up with another way to patch kthreads. The /sys/kernel/livepatch/<patch>/transition file shows whether a patch is in transition. Only a single patch (the topmost patch on the stack) can be in transition at a given time. A patch can remain in transition indefinitely, if any of the tasks are stuck in the initial patch state. A transition can be reversed and effectively canceled by writing the opposite value to the /sys/kernel/livepatch/<patch>/enabled file while the transition is in progress. Then all the tasks will attempt to converge back to the original patch state. [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Ingo Molnar <mingo@kernel.org> # for the scheduler changes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14 01:42:40 +00:00
* @transition: the func is currently being applied or reverted
*
* The patched and transition variables define the func's patching state. When
* patching, a func is always in one of the following states:
*
* patched=0 transition=0: unpatched
* patched=0 transition=1: unpatched, temporary starting state
* patched=1 transition=1: patched, may be visible to some tasks
* patched=1 transition=0: patched, visible to all tasks
*
* And when unpatching, it goes in the reverse order:
*
* patched=1 transition=0: patched, visible to all tasks
* patched=1 transition=1: patched, may be visible to some tasks
* patched=0 transition=1: unpatched, temporary ending state
* patched=0 transition=0: unpatched
*/
struct klp_func {
/* external */
const char *old_name;
void *new_func;
/*
livepatch: add old_sympos as disambiguator field to klp_func Currently, patching objects with duplicate symbol names fail because the creation of the sysfs function directory collides with the previous attempt. Appending old_addr to the function name is problematic as it reveals the address of the function being patch to a normal user. Using the symbol's occurrence in kallsyms to postfix the function name in the sysfs directory solves the issue of having consistent unique names and ensuring that the address is not exposed to a normal user. In addition, using the symbol position as the user's method to disambiguate symbols instead of addr allows for disambiguating symbols in modules as well for both function addresses and for relocs. This also simplifies much of the code. Special handling for kASLR is no longer needed and can be removed. The klp_find_verify_func_addr function can be replaced by klp_find_object_symbol, and klp_verify_vmlinux_symbol and its callback can be removed completely. In cases of duplicate symbols, old_sympos will be used to disambiguate instead of old_addr. By default old_sympos will be 0, and patching will only succeed if the symbol is unique. Specifying a positive value will ensure that occurrence of the symbol in kallsyms for the patched object will be used for patching if it is valid. In addition, make old_addr an internal structure field not to be specified by the user. Finally, remove klp_find_verify_func_addr as it can be replaced by klp_find_object_symbol directly. Support for symbol position disambiguation for relocations is added in the next patch in this series. Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-02 02:40:54 +00:00
* The old_sympos field is optional and can be used to resolve
* duplicate symbol names in livepatch objects. If this field is zero,
* it is expected the symbol is unique, otherwise patching fails. If
* this value is greater than zero then that occurrence of the symbol
* in kallsyms for the given object is used.
*/
livepatch: add old_sympos as disambiguator field to klp_func Currently, patching objects with duplicate symbol names fail because the creation of the sysfs function directory collides with the previous attempt. Appending old_addr to the function name is problematic as it reveals the address of the function being patch to a normal user. Using the symbol's occurrence in kallsyms to postfix the function name in the sysfs directory solves the issue of having consistent unique names and ensuring that the address is not exposed to a normal user. In addition, using the symbol position as the user's method to disambiguate symbols instead of addr allows for disambiguating symbols in modules as well for both function addresses and for relocs. This also simplifies much of the code. Special handling for kASLR is no longer needed and can be removed. The klp_find_verify_func_addr function can be replaced by klp_find_object_symbol, and klp_verify_vmlinux_symbol and its callback can be removed completely. In cases of duplicate symbols, old_sympos will be used to disambiguate instead of old_addr. By default old_sympos will be 0, and patching will only succeed if the symbol is unique. Specifying a positive value will ensure that occurrence of the symbol in kallsyms for the patched object will be used for patching if it is valid. In addition, make old_addr an internal structure field not to be specified by the user. Finally, remove klp_find_verify_func_addr as it can be replaced by klp_find_object_symbol directly. Support for symbol position disambiguation for relocations is added in the next patch in this series. Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-02 02:40:54 +00:00
unsigned long old_sympos;
/* internal */
void *old_func;
struct kobject kobj;
struct list_head node;
struct list_head stack_node;
unsigned long old_size, new_size;
livepatch: Add atomic replace Sometimes we would like to revert a particular fix. Currently, this is not easy because we want to keep all other fixes active and we could revert only the last applied patch. One solution would be to apply new patch that implemented all the reverted functions like in the original code. It would work as expected but there will be unnecessary redirections. In addition, it would also require knowing which functions need to be reverted at build time. Another problem is when there are many patches that touch the same functions. There might be dependencies between patches that are not enforced on the kernel side. Also it might be pretty hard to actually prepare the patch and ensure compatibility with the other patches. Atomic replace && cumulative patches: A better solution would be to create cumulative patch and say that it replaces all older ones. This patch adds a new "replace" flag to struct klp_patch. When it is enabled, a set of 'nop' klp_func will be dynamically created for all functions that are already being patched but that will no longer be modified by the new patch. They are used as a new target during the patch transition. The idea is to handle Nops' structures like the static ones. When the dynamic structures are allocated, we initialize all values that are normally statically defined. The only exception is "new_func" in struct klp_func. It has to point to the original function and the address is known only when the object (module) is loaded. Note that we really need to set it. The address is used, for example, in klp_check_stack_func(). Nevertheless we still need to distinguish the dynamically allocated structures in some operations. For this, we add "nop" flag into struct klp_func and "dynamic" flag into struct klp_object. They need special handling in the following situations: + The structures are added into the lists of objects and functions immediately. In fact, the lists were created for this purpose. + The address of the original function is known only when the patched object (module) is loaded. Therefore it is copied later in klp_init_object_loaded(). + The ftrace handler must not set PC to func->new_func. It would cause infinite loop because the address points back to the beginning of the original function. + The various free() functions must free the structure itself. Note that other ways to detect the dynamic structures are not considered safe. For example, even the statically defined struct klp_object might include empty funcs array. It might be there just to run some callbacks. Also note that the safe iterator must be used in the free() functions. Otherwise already freed structures might get accessed. Special callbacks handling: The callbacks from the replaced patches are _not_ called by intention. It would be pretty hard to define a reasonable semantic and implement it. It might even be counter-productive. The new patch is cumulative. It is supposed to include most of the changes from older patches. In most cases, it will not want to call pre_unpatch() post_unpatch() callbacks from the replaced patches. It would disable/break things for no good reasons. Also it should be easier to handle various scenarios in a single script in the new patch than think about interactions caused by running many scripts from older patches. Not to say that the old scripts even would not expect to be called in this situation. Removing replaced patches: One nice effect of the cumulative patches is that the code from the older patches is no longer used. Therefore the replaced patches can be removed. It has several advantages: + Nops' structs will no longer be necessary and might be removed. This would save memory, restore performance (no ftrace handler), allow clear view on what is really patched. + Disabling the patch will cause using the original code everywhere. Therefore the livepatch callbacks could handle only one scenario. Note that the complication is already complex enough when the patch gets enabled. It is currently solved by calling callbacks only from the new cumulative patch. + The state is clean in both the sysfs interface and lsmod. The modules with the replaced livepatches might even get removed from the system. Some people actually expected this behavior from the beginning. After all a cumulative patch is supposed to "completely" replace an existing one. It is like when a new version of an application replaces an older one. This patch does the first step. It removes the replaced patches from the list of patches. It is safe. The consistency model ensures that they are no longer used. By other words, each process works only with the structures from klp_transition_patch. The removal is done by a special function. It combines actions done by __disable_patch() and klp_complete_transition(). But it is a fast track without all the transaction-related stuff. Signed-off-by: Jason Baron <jbaron@akamai.com> [pmladek@suse.com: Split, reuse existing code, simplified] Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-09 12:43:25 +00:00
bool nop;
bool patched;
livepatch: change to a per-task consistency model Change livepatch to use a basic per-task consistency model. This is the foundation which will eventually enable us to patch those ~10% of security patches which change function or data semantics. This is the biggest remaining piece needed to make livepatch more generally useful. This code stems from the design proposal made by Vojtech [1] in November 2014. It's a hybrid of kGraft and kpatch: it uses kGraft's per-task consistency and syscall barrier switching combined with kpatch's stack trace switching. There are also a number of fallback options which make it quite flexible. Patches are applied on a per-task basis, when the task is deemed safe to switch over. When a patch is enabled, livepatch enters into a transition state where tasks are converging to the patched state. Usually this transition state can complete in a few seconds. The same sequence occurs when a patch is disabled, except the tasks converge from the patched state to the unpatched state. An interrupt handler inherits the patched state of the task it interrupts. The same is true for forked tasks: the child inherits the patched state of the parent. Livepatch uses several complementary approaches to determine when it's safe to patch tasks: 1. The first and most effective approach is stack checking of sleeping tasks. If no affected functions are on the stack of a given task, the task is patched. In most cases this will patch most or all of the tasks on the first try. Otherwise it'll keep trying periodically. This option is only available if the architecture has reliable stacks (HAVE_RELIABLE_STACKTRACE). 2. The second approach, if needed, is kernel exit switching. A task is switched when it returns to user space from a system call, a user space IRQ, or a signal. It's useful in the following cases: a) Patching I/O-bound user tasks which are sleeping on an affected function. In this case you have to send SIGSTOP and SIGCONT to force it to exit the kernel and be patched. b) Patching CPU-bound user tasks. If the task is highly CPU-bound then it will get patched the next time it gets interrupted by an IRQ. c) In the future it could be useful for applying patches for architectures which don't yet have HAVE_RELIABLE_STACKTRACE. In this case you would have to signal most of the tasks on the system. However this isn't supported yet because there's currently no way to patch kthreads without HAVE_RELIABLE_STACKTRACE. 3. For idle "swapper" tasks, since they don't ever exit the kernel, they instead have a klp_update_patch_state() call in the idle loop which allows them to be patched before the CPU enters the idle state. (Note there's not yet such an approach for kthreads.) All the above approaches may be skipped by setting the 'immediate' flag in the 'klp_patch' struct, which will disable per-task consistency and patch all tasks immediately. This can be useful if the patch doesn't change any function or data semantics. Note that, even with this flag set, it's possible that some tasks may still be running with an old version of the function, until that function returns. There's also an 'immediate' flag in the 'klp_func' struct which allows you to specify that certain functions in the patch can be applied without per-task consistency. This might be useful if you want to patch a common function like schedule(), and the function change doesn't need consistency but the rest of the patch does. For architectures which don't have HAVE_RELIABLE_STACKTRACE, the user must set patch->immediate which causes all tasks to be patched immediately. This option should be used with care, only when the patch doesn't change any function or data semantics. In the future, architectures which don't have HAVE_RELIABLE_STACKTRACE may be allowed to use per-task consistency if we can come up with another way to patch kthreads. The /sys/kernel/livepatch/<patch>/transition file shows whether a patch is in transition. Only a single patch (the topmost patch on the stack) can be in transition at a given time. A patch can remain in transition indefinitely, if any of the tasks are stuck in the initial patch state. A transition can be reversed and effectively canceled by writing the opposite value to the /sys/kernel/livepatch/<patch>/enabled file while the transition is in progress. Then all the tasks will attempt to converge back to the original patch state. [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Ingo Molnar <mingo@kernel.org> # for the scheduler changes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14 01:42:40 +00:00
bool transition;
};
struct klp_object;
/**
* struct klp_callbacks - pre/post live-(un)patch callback structure
* @pre_patch: executed before code patching
* @post_patch: executed after code patching
* @pre_unpatch: executed before code unpatching
* @post_unpatch: executed after code unpatching
* @post_unpatch_enabled: flag indicating if post-unpatch callback
* should run
*
* All callbacks are optional. Only the pre-patch callback, if provided,
* will be unconditionally executed. If the parent klp_object fails to
* patch for any reason, including a non-zero error status returned from
* the pre-patch callback, no further callbacks will be executed.
*/
struct klp_callbacks {
int (*pre_patch)(struct klp_object *obj);
void (*post_patch)(struct klp_object *obj);
void (*pre_unpatch)(struct klp_object *obj);
void (*post_unpatch)(struct klp_object *obj);
bool post_unpatch_enabled;
};
/**
* struct klp_object - kernel object structure for live patching
* @name: module name (or NULL for vmlinux)
* @funcs: function entries for functions to be patched in the object
* @callbacks: functions to be executed pre/post (un)patching
* @kobj: kobject for sysfs resources
* @func_list: dynamic list of the function entries
* @node: list node for klp_patch obj_list
* @mod: kernel module associated with the patched object
livepatch: change to a per-task consistency model Change livepatch to use a basic per-task consistency model. This is the foundation which will eventually enable us to patch those ~10% of security patches which change function or data semantics. This is the biggest remaining piece needed to make livepatch more generally useful. This code stems from the design proposal made by Vojtech [1] in November 2014. It's a hybrid of kGraft and kpatch: it uses kGraft's per-task consistency and syscall barrier switching combined with kpatch's stack trace switching. There are also a number of fallback options which make it quite flexible. Patches are applied on a per-task basis, when the task is deemed safe to switch over. When a patch is enabled, livepatch enters into a transition state where tasks are converging to the patched state. Usually this transition state can complete in a few seconds. The same sequence occurs when a patch is disabled, except the tasks converge from the patched state to the unpatched state. An interrupt handler inherits the patched state of the task it interrupts. The same is true for forked tasks: the child inherits the patched state of the parent. Livepatch uses several complementary approaches to determine when it's safe to patch tasks: 1. The first and most effective approach is stack checking of sleeping tasks. If no affected functions are on the stack of a given task, the task is patched. In most cases this will patch most or all of the tasks on the first try. Otherwise it'll keep trying periodically. This option is only available if the architecture has reliable stacks (HAVE_RELIABLE_STACKTRACE). 2. The second approach, if needed, is kernel exit switching. A task is switched when it returns to user space from a system call, a user space IRQ, or a signal. It's useful in the following cases: a) Patching I/O-bound user tasks which are sleeping on an affected function. In this case you have to send SIGSTOP and SIGCONT to force it to exit the kernel and be patched. b) Patching CPU-bound user tasks. If the task is highly CPU-bound then it will get patched the next time it gets interrupted by an IRQ. c) In the future it could be useful for applying patches for architectures which don't yet have HAVE_RELIABLE_STACKTRACE. In this case you would have to signal most of the tasks on the system. However this isn't supported yet because there's currently no way to patch kthreads without HAVE_RELIABLE_STACKTRACE. 3. For idle "swapper" tasks, since they don't ever exit the kernel, they instead have a klp_update_patch_state() call in the idle loop which allows them to be patched before the CPU enters the idle state. (Note there's not yet such an approach for kthreads.) All the above approaches may be skipped by setting the 'immediate' flag in the 'klp_patch' struct, which will disable per-task consistency and patch all tasks immediately. This can be useful if the patch doesn't change any function or data semantics. Note that, even with this flag set, it's possible that some tasks may still be running with an old version of the function, until that function returns. There's also an 'immediate' flag in the 'klp_func' struct which allows you to specify that certain functions in the patch can be applied without per-task consistency. This might be useful if you want to patch a common function like schedule(), and the function change doesn't need consistency but the rest of the patch does. For architectures which don't have HAVE_RELIABLE_STACKTRACE, the user must set patch->immediate which causes all tasks to be patched immediately. This option should be used with care, only when the patch doesn't change any function or data semantics. In the future, architectures which don't have HAVE_RELIABLE_STACKTRACE may be allowed to use per-task consistency if we can come up with another way to patch kthreads. The /sys/kernel/livepatch/<patch>/transition file shows whether a patch is in transition. Only a single patch (the topmost patch on the stack) can be in transition at a given time. A patch can remain in transition indefinitely, if any of the tasks are stuck in the initial patch state. A transition can be reversed and effectively canceled by writing the opposite value to the /sys/kernel/livepatch/<patch>/enabled file while the transition is in progress. Then all the tasks will attempt to converge back to the original patch state. [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Ingo Molnar <mingo@kernel.org> # for the scheduler changes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14 01:42:40 +00:00
* (NULL for vmlinux)
livepatch: Add atomic replace Sometimes we would like to revert a particular fix. Currently, this is not easy because we want to keep all other fixes active and we could revert only the last applied patch. One solution would be to apply new patch that implemented all the reverted functions like in the original code. It would work as expected but there will be unnecessary redirections. In addition, it would also require knowing which functions need to be reverted at build time. Another problem is when there are many patches that touch the same functions. There might be dependencies between patches that are not enforced on the kernel side. Also it might be pretty hard to actually prepare the patch and ensure compatibility with the other patches. Atomic replace && cumulative patches: A better solution would be to create cumulative patch and say that it replaces all older ones. This patch adds a new "replace" flag to struct klp_patch. When it is enabled, a set of 'nop' klp_func will be dynamically created for all functions that are already being patched but that will no longer be modified by the new patch. They are used as a new target during the patch transition. The idea is to handle Nops' structures like the static ones. When the dynamic structures are allocated, we initialize all values that are normally statically defined. The only exception is "new_func" in struct klp_func. It has to point to the original function and the address is known only when the object (module) is loaded. Note that we really need to set it. The address is used, for example, in klp_check_stack_func(). Nevertheless we still need to distinguish the dynamically allocated structures in some operations. For this, we add "nop" flag into struct klp_func and "dynamic" flag into struct klp_object. They need special handling in the following situations: + The structures are added into the lists of objects and functions immediately. In fact, the lists were created for this purpose. + The address of the original function is known only when the patched object (module) is loaded. Therefore it is copied later in klp_init_object_loaded(). + The ftrace handler must not set PC to func->new_func. It would cause infinite loop because the address points back to the beginning of the original function. + The various free() functions must free the structure itself. Note that other ways to detect the dynamic structures are not considered safe. For example, even the statically defined struct klp_object might include empty funcs array. It might be there just to run some callbacks. Also note that the safe iterator must be used in the free() functions. Otherwise already freed structures might get accessed. Special callbacks handling: The callbacks from the replaced patches are _not_ called by intention. It would be pretty hard to define a reasonable semantic and implement it. It might even be counter-productive. The new patch is cumulative. It is supposed to include most of the changes from older patches. In most cases, it will not want to call pre_unpatch() post_unpatch() callbacks from the replaced patches. It would disable/break things for no good reasons. Also it should be easier to handle various scenarios in a single script in the new patch than think about interactions caused by running many scripts from older patches. Not to say that the old scripts even would not expect to be called in this situation. Removing replaced patches: One nice effect of the cumulative patches is that the code from the older patches is no longer used. Therefore the replaced patches can be removed. It has several advantages: + Nops' structs will no longer be necessary and might be removed. This would save memory, restore performance (no ftrace handler), allow clear view on what is really patched. + Disabling the patch will cause using the original code everywhere. Therefore the livepatch callbacks could handle only one scenario. Note that the complication is already complex enough when the patch gets enabled. It is currently solved by calling callbacks only from the new cumulative patch. + The state is clean in both the sysfs interface and lsmod. The modules with the replaced livepatches might even get removed from the system. Some people actually expected this behavior from the beginning. After all a cumulative patch is supposed to "completely" replace an existing one. It is like when a new version of an application replaces an older one. This patch does the first step. It removes the replaced patches from the list of patches. It is safe. The consistency model ensures that they are no longer used. By other words, each process works only with the structures from klp_transition_patch. The removal is done by a special function. It combines actions done by __disable_patch() and klp_complete_transition(). But it is a fast track without all the transaction-related stuff. Signed-off-by: Jason Baron <jbaron@akamai.com> [pmladek@suse.com: Split, reuse existing code, simplified] Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-09 12:43:25 +00:00
* @dynamic: temporary object for nop functions; dynamically allocated
* @patched: the object's funcs have been added to the klp_ops list
*/
struct klp_object {
/* external */
const char *name;
struct klp_func *funcs;
struct klp_callbacks callbacks;
/* internal */
struct kobject kobj;
struct list_head func_list;
struct list_head node;
struct module *mod;
livepatch: Add atomic replace Sometimes we would like to revert a particular fix. Currently, this is not easy because we want to keep all other fixes active and we could revert only the last applied patch. One solution would be to apply new patch that implemented all the reverted functions like in the original code. It would work as expected but there will be unnecessary redirections. In addition, it would also require knowing which functions need to be reverted at build time. Another problem is when there are many patches that touch the same functions. There might be dependencies between patches that are not enforced on the kernel side. Also it might be pretty hard to actually prepare the patch and ensure compatibility with the other patches. Atomic replace && cumulative patches: A better solution would be to create cumulative patch and say that it replaces all older ones. This patch adds a new "replace" flag to struct klp_patch. When it is enabled, a set of 'nop' klp_func will be dynamically created for all functions that are already being patched but that will no longer be modified by the new patch. They are used as a new target during the patch transition. The idea is to handle Nops' structures like the static ones. When the dynamic structures are allocated, we initialize all values that are normally statically defined. The only exception is "new_func" in struct klp_func. It has to point to the original function and the address is known only when the object (module) is loaded. Note that we really need to set it. The address is used, for example, in klp_check_stack_func(). Nevertheless we still need to distinguish the dynamically allocated structures in some operations. For this, we add "nop" flag into struct klp_func and "dynamic" flag into struct klp_object. They need special handling in the following situations: + The structures are added into the lists of objects and functions immediately. In fact, the lists were created for this purpose. + The address of the original function is known only when the patched object (module) is loaded. Therefore it is copied later in klp_init_object_loaded(). + The ftrace handler must not set PC to func->new_func. It would cause infinite loop because the address points back to the beginning of the original function. + The various free() functions must free the structure itself. Note that other ways to detect the dynamic structures are not considered safe. For example, even the statically defined struct klp_object might include empty funcs array. It might be there just to run some callbacks. Also note that the safe iterator must be used in the free() functions. Otherwise already freed structures might get accessed. Special callbacks handling: The callbacks from the replaced patches are _not_ called by intention. It would be pretty hard to define a reasonable semantic and implement it. It might even be counter-productive. The new patch is cumulative. It is supposed to include most of the changes from older patches. In most cases, it will not want to call pre_unpatch() post_unpatch() callbacks from the replaced patches. It would disable/break things for no good reasons. Also it should be easier to handle various scenarios in a single script in the new patch than think about interactions caused by running many scripts from older patches. Not to say that the old scripts even would not expect to be called in this situation. Removing replaced patches: One nice effect of the cumulative patches is that the code from the older patches is no longer used. Therefore the replaced patches can be removed. It has several advantages: + Nops' structs will no longer be necessary and might be removed. This would save memory, restore performance (no ftrace handler), allow clear view on what is really patched. + Disabling the patch will cause using the original code everywhere. Therefore the livepatch callbacks could handle only one scenario. Note that the complication is already complex enough when the patch gets enabled. It is currently solved by calling callbacks only from the new cumulative patch. + The state is clean in both the sysfs interface and lsmod. The modules with the replaced livepatches might even get removed from the system. Some people actually expected this behavior from the beginning. After all a cumulative patch is supposed to "completely" replace an existing one. It is like when a new version of an application replaces an older one. This patch does the first step. It removes the replaced patches from the list of patches. It is safe. The consistency model ensures that they are no longer used. By other words, each process works only with the structures from klp_transition_patch. The removal is done by a special function. It combines actions done by __disable_patch() and klp_complete_transition(). But it is a fast track without all the transaction-related stuff. Signed-off-by: Jason Baron <jbaron@akamai.com> [pmladek@suse.com: Split, reuse existing code, simplified] Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-09 12:43:25 +00:00
bool dynamic;
bool patched;
};
livepatch: Basic API to track system state changes This is another step how to help maintaining more livepatches. One big help was the atomic replace and cumulative livepatches. These livepatches replace the already installed ones. Therefore it should be enough when each cumulative livepatch is consistent. The problems might come with shadow variables and callbacks. They might change the system behavior or state so that it is no longer safe to go back and use an older livepatch or the original kernel code. Also, a new livepatch must be able to detect changes which were made by the already installed livepatches. This is where the livepatch system state tracking gets useful. It allows to: - find whether a system state has already been modified by previous livepatches - store data needed to manipulate and restore the system state The information about the manipulated system states is stored in an array of struct klp_state. It can be searched by two new functions klp_get_state() and klp_get_prev_state(). The dependencies are going to be solved by a version field added later. The only important information is that it will be allowed to modify the same state by more non-cumulative livepatches. It is similar to allowing to modify the same function several times. The livepatch author is responsible for preventing incompatible changes. Link: http://lkml.kernel.org/r/20191030154313.13263-3-pmladek@suse.com To: Jiri Kosina <jikos@kernel.org> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Nicolai Stange <nstange@suse.de> Cc: live-patching@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-10-30 15:43:10 +00:00
/**
* struct klp_state - state of the system modified by the livepatch
* @id: system state identifier (non-zero)
livepatch: Allow to distinguish different version of system state changes The atomic replace runs pre/post (un)install callbacks only from the new livepatch. There are several reasons for this: + Simplicity: clear ordering of operations, no interactions between old and new callbacks. + Reliability: only new livepatch knows what changes can already be made by older livepatches and how to take over the state. + Testing: the atomic replace can be properly tested only when a newer livepatch is available. It might be too late to fix unwanted effect of callbacks from older livepatches. It might happen that an older change is not enough and the same system state has to be modified another way. Different changes need to get distinguished by a version number added to struct klp_state. The version can also be used to prevent loading incompatible livepatches. The check is done when the livepatch is enabled. The rules are: + Any completely new system state modification is allowed. + System state modifications with the same or higher version are allowed for already modified system states. + Cumulative livepatches must handle all system state modifications from already installed livepatches. + Non-cumulative livepatches are allowed to touch already modified system states. Link: http://lkml.kernel.org/r/20191030154313.13263-4-pmladek@suse.com To: Jiri Kosina <jikos@kernel.org> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Nicolai Stange <nstange@suse.de> Cc: live-patching@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-10-30 15:43:11 +00:00
* @version: version of the change
livepatch: Basic API to track system state changes This is another step how to help maintaining more livepatches. One big help was the atomic replace and cumulative livepatches. These livepatches replace the already installed ones. Therefore it should be enough when each cumulative livepatch is consistent. The problems might come with shadow variables and callbacks. They might change the system behavior or state so that it is no longer safe to go back and use an older livepatch or the original kernel code. Also, a new livepatch must be able to detect changes which were made by the already installed livepatches. This is where the livepatch system state tracking gets useful. It allows to: - find whether a system state has already been modified by previous livepatches - store data needed to manipulate and restore the system state The information about the manipulated system states is stored in an array of struct klp_state. It can be searched by two new functions klp_get_state() and klp_get_prev_state(). The dependencies are going to be solved by a version field added later. The only important information is that it will be allowed to modify the same state by more non-cumulative livepatches. It is similar to allowing to modify the same function several times. The livepatch author is responsible for preventing incompatible changes. Link: http://lkml.kernel.org/r/20191030154313.13263-3-pmladek@suse.com To: Jiri Kosina <jikos@kernel.org> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Nicolai Stange <nstange@suse.de> Cc: live-patching@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-10-30 15:43:10 +00:00
* @data: custom data
*/
struct klp_state {
unsigned long id;
livepatch: Allow to distinguish different version of system state changes The atomic replace runs pre/post (un)install callbacks only from the new livepatch. There are several reasons for this: + Simplicity: clear ordering of operations, no interactions between old and new callbacks. + Reliability: only new livepatch knows what changes can already be made by older livepatches and how to take over the state. + Testing: the atomic replace can be properly tested only when a newer livepatch is available. It might be too late to fix unwanted effect of callbacks from older livepatches. It might happen that an older change is not enough and the same system state has to be modified another way. Different changes need to get distinguished by a version number added to struct klp_state. The version can also be used to prevent loading incompatible livepatches. The check is done when the livepatch is enabled. The rules are: + Any completely new system state modification is allowed. + System state modifications with the same or higher version are allowed for already modified system states. + Cumulative livepatches must handle all system state modifications from already installed livepatches. + Non-cumulative livepatches are allowed to touch already modified system states. Link: http://lkml.kernel.org/r/20191030154313.13263-4-pmladek@suse.com To: Jiri Kosina <jikos@kernel.org> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Nicolai Stange <nstange@suse.de> Cc: live-patching@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-10-30 15:43:11 +00:00
unsigned int version;
livepatch: Basic API to track system state changes This is another step how to help maintaining more livepatches. One big help was the atomic replace and cumulative livepatches. These livepatches replace the already installed ones. Therefore it should be enough when each cumulative livepatch is consistent. The problems might come with shadow variables and callbacks. They might change the system behavior or state so that it is no longer safe to go back and use an older livepatch or the original kernel code. Also, a new livepatch must be able to detect changes which were made by the already installed livepatches. This is where the livepatch system state tracking gets useful. It allows to: - find whether a system state has already been modified by previous livepatches - store data needed to manipulate and restore the system state The information about the manipulated system states is stored in an array of struct klp_state. It can be searched by two new functions klp_get_state() and klp_get_prev_state(). The dependencies are going to be solved by a version field added later. The only important information is that it will be allowed to modify the same state by more non-cumulative livepatches. It is similar to allowing to modify the same function several times. The livepatch author is responsible for preventing incompatible changes. Link: http://lkml.kernel.org/r/20191030154313.13263-3-pmladek@suse.com To: Jiri Kosina <jikos@kernel.org> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Nicolai Stange <nstange@suse.de> Cc: live-patching@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-10-30 15:43:10 +00:00
void *data;
};
/**
* struct klp_patch - patch structure for live patching
* @mod: reference to the live patch module
* @objs: object entries for kernel objects to be patched
livepatch: Basic API to track system state changes This is another step how to help maintaining more livepatches. One big help was the atomic replace and cumulative livepatches. These livepatches replace the already installed ones. Therefore it should be enough when each cumulative livepatch is consistent. The problems might come with shadow variables and callbacks. They might change the system behavior or state so that it is no longer safe to go back and use an older livepatch or the original kernel code. Also, a new livepatch must be able to detect changes which were made by the already installed livepatches. This is where the livepatch system state tracking gets useful. It allows to: - find whether a system state has already been modified by previous livepatches - store data needed to manipulate and restore the system state The information about the manipulated system states is stored in an array of struct klp_state. It can be searched by two new functions klp_get_state() and klp_get_prev_state(). The dependencies are going to be solved by a version field added later. The only important information is that it will be allowed to modify the same state by more non-cumulative livepatches. It is similar to allowing to modify the same function several times. The livepatch author is responsible for preventing incompatible changes. Link: http://lkml.kernel.org/r/20191030154313.13263-3-pmladek@suse.com To: Jiri Kosina <jikos@kernel.org> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Nicolai Stange <nstange@suse.de> Cc: live-patching@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-10-30 15:43:10 +00:00
* @states: system states that can get modified
livepatch: Add atomic replace Sometimes we would like to revert a particular fix. Currently, this is not easy because we want to keep all other fixes active and we could revert only the last applied patch. One solution would be to apply new patch that implemented all the reverted functions like in the original code. It would work as expected but there will be unnecessary redirections. In addition, it would also require knowing which functions need to be reverted at build time. Another problem is when there are many patches that touch the same functions. There might be dependencies between patches that are not enforced on the kernel side. Also it might be pretty hard to actually prepare the patch and ensure compatibility with the other patches. Atomic replace && cumulative patches: A better solution would be to create cumulative patch and say that it replaces all older ones. This patch adds a new "replace" flag to struct klp_patch. When it is enabled, a set of 'nop' klp_func will be dynamically created for all functions that are already being patched but that will no longer be modified by the new patch. They are used as a new target during the patch transition. The idea is to handle Nops' structures like the static ones. When the dynamic structures are allocated, we initialize all values that are normally statically defined. The only exception is "new_func" in struct klp_func. It has to point to the original function and the address is known only when the object (module) is loaded. Note that we really need to set it. The address is used, for example, in klp_check_stack_func(). Nevertheless we still need to distinguish the dynamically allocated structures in some operations. For this, we add "nop" flag into struct klp_func and "dynamic" flag into struct klp_object. They need special handling in the following situations: + The structures are added into the lists of objects and functions immediately. In fact, the lists were created for this purpose. + The address of the original function is known only when the patched object (module) is loaded. Therefore it is copied later in klp_init_object_loaded(). + The ftrace handler must not set PC to func->new_func. It would cause infinite loop because the address points back to the beginning of the original function. + The various free() functions must free the structure itself. Note that other ways to detect the dynamic structures are not considered safe. For example, even the statically defined struct klp_object might include empty funcs array. It might be there just to run some callbacks. Also note that the safe iterator must be used in the free() functions. Otherwise already freed structures might get accessed. Special callbacks handling: The callbacks from the replaced patches are _not_ called by intention. It would be pretty hard to define a reasonable semantic and implement it. It might even be counter-productive. The new patch is cumulative. It is supposed to include most of the changes from older patches. In most cases, it will not want to call pre_unpatch() post_unpatch() callbacks from the replaced patches. It would disable/break things for no good reasons. Also it should be easier to handle various scenarios in a single script in the new patch than think about interactions caused by running many scripts from older patches. Not to say that the old scripts even would not expect to be called in this situation. Removing replaced patches: One nice effect of the cumulative patches is that the code from the older patches is no longer used. Therefore the replaced patches can be removed. It has several advantages: + Nops' structs will no longer be necessary and might be removed. This would save memory, restore performance (no ftrace handler), allow clear view on what is really patched. + Disabling the patch will cause using the original code everywhere. Therefore the livepatch callbacks could handle only one scenario. Note that the complication is already complex enough when the patch gets enabled. It is currently solved by calling callbacks only from the new cumulative patch. + The state is clean in both the sysfs interface and lsmod. The modules with the replaced livepatches might even get removed from the system. Some people actually expected this behavior from the beginning. After all a cumulative patch is supposed to "completely" replace an existing one. It is like when a new version of an application replaces an older one. This patch does the first step. It removes the replaced patches from the list of patches. It is safe. The consistency model ensures that they are no longer used. By other words, each process works only with the structures from klp_transition_patch. The removal is done by a special function. It combines actions done by __disable_patch() and klp_complete_transition(). But it is a fast track without all the transaction-related stuff. Signed-off-by: Jason Baron <jbaron@akamai.com> [pmladek@suse.com: Split, reuse existing code, simplified] Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-09 12:43:25 +00:00
* @replace: replace all actively used patches
livepatch: Simplify API by removing registration step The possibility to re-enable a registered patch was useful for immediate patches where the livepatch module had to stay until the system reboot. The improved consistency model allows to achieve the same result by unloading and loading the livepatch module again. Also we are going to add a feature called atomic replace. It will allow to create a patch that would replace all already registered patches. The aim is to handle dependent patches more securely. It will obsolete the stack of patches that helped to handle the dependencies so far. Then it might be unclear when a cumulative patch re-enabling is safe. It would be complicated to support the many modes. Instead we could actually make the API and code easier to understand. Therefore, remove the two step public API. All the checks and init calls are moved from klp_register_patch() to klp_enabled_patch(). Also the patch is automatically freed, including the sysfs interface when the transition to the disabled state is completed. As a result, there is never a disabled patch on the top of the stack. Therefore we do not need to check the stack in __klp_enable_patch(). And we could simplify the check in __klp_disable_patch(). Also the API and logic is much easier. It is enough to call klp_enable_patch() in module_init() call. The patch can be disabled by writing '0' into /sys/kernel/livepatch/<patch>/enabled. Then the module can be removed once the transition finishes and sysfs interface is freed. The only problem is how to free the structures and kobjects safely. The operation is triggered from the sysfs interface. We could not put the related kobject from there because it would cause lock inversion between klp_mutex and kernfs locks, see kn->count lockdep map. Therefore, offload the free task to a workqueue. It is perfectly fine: + The patch can no longer be used in the livepatch operations. + The module could not be removed until the free operation finishes and module_put() is called. + The operation is asynchronous already when the first klp_try_complete_transition() fails and another call is queued with a delay. Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-09 12:43:23 +00:00
* @list: list node for global list of actively used patches
* @kobj: kobject for sysfs resources
* @obj_list: dynamic list of the object entries
* @enabled: the patch is enabled (but operation may be incomplete)
* @forced: was involved in a forced transition
livepatch: Simplify API by removing registration step The possibility to re-enable a registered patch was useful for immediate patches where the livepatch module had to stay until the system reboot. The improved consistency model allows to achieve the same result by unloading and loading the livepatch module again. Also we are going to add a feature called atomic replace. It will allow to create a patch that would replace all already registered patches. The aim is to handle dependent patches more securely. It will obsolete the stack of patches that helped to handle the dependencies so far. Then it might be unclear when a cumulative patch re-enabling is safe. It would be complicated to support the many modes. Instead we could actually make the API and code easier to understand. Therefore, remove the two step public API. All the checks and init calls are moved from klp_register_patch() to klp_enabled_patch(). Also the patch is automatically freed, including the sysfs interface when the transition to the disabled state is completed. As a result, there is never a disabled patch on the top of the stack. Therefore we do not need to check the stack in __klp_enable_patch(). And we could simplify the check in __klp_disable_patch(). Also the API and logic is much easier. It is enough to call klp_enable_patch() in module_init() call. The patch can be disabled by writing '0' into /sys/kernel/livepatch/<patch>/enabled. Then the module can be removed once the transition finishes and sysfs interface is freed. The only problem is how to free the structures and kobjects safely. The operation is triggered from the sysfs interface. We could not put the related kobject from there because it would cause lock inversion between klp_mutex and kernfs locks, see kn->count lockdep map. Therefore, offload the free task to a workqueue. It is perfectly fine: + The patch can no longer be used in the livepatch operations. + The module could not be removed until the free operation finishes and module_put() is called. + The operation is asynchronous already when the first klp_try_complete_transition() fails and another call is queued with a delay. Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-09 12:43:23 +00:00
* @free_work: patch cleanup from workqueue-context
livepatch: allow removal of a disabled patch Currently we do not allow patch module to unload since there is no method to determine if a task is still running in the patched code. The consistency model gives us the way because when the unpatching finishes we know that all tasks were marked as safe to call an original function. Thus every new call to the function calls the original code and at the same time no task can be somewhere in the patched code, because it had to leave that code to be marked as safe. We can safely let the patch module go after that. Completion is used for synchronization between module removal and sysfs infrastructure in a similar way to commit 942e443127e9 ("module: Fix mod->mkobj.kobj potentially freed too early"). Note that we still do not allow the removal for immediate model, that is no consistency model. The module refcount may increase in this case if somebody disables and enables the patch several times. This should not cause any harm. With this change a call to try_module_get() is moved to __klp_enable_patch from klp_register_patch to make module reference counting symmetric (module_put() is in a patch disable path) and to allow to take a new reference to a disabled module when being enabled. Finally, we need to be very careful about possible races between klp_unregister_patch(), kobject_put() functions and operations on the related sysfs files. kobject_put(&patch->kobj) must be called without klp_mutex. Otherwise, it might be blocked by enabled_store() that needs the mutex as well. In addition, enabled_store() must check if the patch was not unregisted in the meantime. There is no need to do the same for other kobject_put() callsites at the moment. Their sysfs operations neither take the lock nor they access any data that might be freed in the meantime. There was an attempt to use kobjects the right way and prevent these races by design. But it made the patch definition more complicated and opened another can of worms. See https://lkml.kernel.org/r/1464018848-4303-1-git-send-email-pmladek@suse.com [Thanks to Petr Mladek for improving the commit message.] Signed-off-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-06 17:20:29 +00:00
* @finish: for waiting till it is safe to remove the patch module
*/
struct klp_patch {
/* external */
struct module *mod;
struct klp_object *objs;
livepatch: Basic API to track system state changes This is another step how to help maintaining more livepatches. One big help was the atomic replace and cumulative livepatches. These livepatches replace the already installed ones. Therefore it should be enough when each cumulative livepatch is consistent. The problems might come with shadow variables and callbacks. They might change the system behavior or state so that it is no longer safe to go back and use an older livepatch or the original kernel code. Also, a new livepatch must be able to detect changes which were made by the already installed livepatches. This is where the livepatch system state tracking gets useful. It allows to: - find whether a system state has already been modified by previous livepatches - store data needed to manipulate and restore the system state The information about the manipulated system states is stored in an array of struct klp_state. It can be searched by two new functions klp_get_state() and klp_get_prev_state(). The dependencies are going to be solved by a version field added later. The only important information is that it will be allowed to modify the same state by more non-cumulative livepatches. It is similar to allowing to modify the same function several times. The livepatch author is responsible for preventing incompatible changes. Link: http://lkml.kernel.org/r/20191030154313.13263-3-pmladek@suse.com To: Jiri Kosina <jikos@kernel.org> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Nicolai Stange <nstange@suse.de> Cc: live-patching@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-10-30 15:43:10 +00:00
struct klp_state *states;
livepatch: Add atomic replace Sometimes we would like to revert a particular fix. Currently, this is not easy because we want to keep all other fixes active and we could revert only the last applied patch. One solution would be to apply new patch that implemented all the reverted functions like in the original code. It would work as expected but there will be unnecessary redirections. In addition, it would also require knowing which functions need to be reverted at build time. Another problem is when there are many patches that touch the same functions. There might be dependencies between patches that are not enforced on the kernel side. Also it might be pretty hard to actually prepare the patch and ensure compatibility with the other patches. Atomic replace && cumulative patches: A better solution would be to create cumulative patch and say that it replaces all older ones. This patch adds a new "replace" flag to struct klp_patch. When it is enabled, a set of 'nop' klp_func will be dynamically created for all functions that are already being patched but that will no longer be modified by the new patch. They are used as a new target during the patch transition. The idea is to handle Nops' structures like the static ones. When the dynamic structures are allocated, we initialize all values that are normally statically defined. The only exception is "new_func" in struct klp_func. It has to point to the original function and the address is known only when the object (module) is loaded. Note that we really need to set it. The address is used, for example, in klp_check_stack_func(). Nevertheless we still need to distinguish the dynamically allocated structures in some operations. For this, we add "nop" flag into struct klp_func and "dynamic" flag into struct klp_object. They need special handling in the following situations: + The structures are added into the lists of objects and functions immediately. In fact, the lists were created for this purpose. + The address of the original function is known only when the patched object (module) is loaded. Therefore it is copied later in klp_init_object_loaded(). + The ftrace handler must not set PC to func->new_func. It would cause infinite loop because the address points back to the beginning of the original function. + The various free() functions must free the structure itself. Note that other ways to detect the dynamic structures are not considered safe. For example, even the statically defined struct klp_object might include empty funcs array. It might be there just to run some callbacks. Also note that the safe iterator must be used in the free() functions. Otherwise already freed structures might get accessed. Special callbacks handling: The callbacks from the replaced patches are _not_ called by intention. It would be pretty hard to define a reasonable semantic and implement it. It might even be counter-productive. The new patch is cumulative. It is supposed to include most of the changes from older patches. In most cases, it will not want to call pre_unpatch() post_unpatch() callbacks from the replaced patches. It would disable/break things for no good reasons. Also it should be easier to handle various scenarios in a single script in the new patch than think about interactions caused by running many scripts from older patches. Not to say that the old scripts even would not expect to be called in this situation. Removing replaced patches: One nice effect of the cumulative patches is that the code from the older patches is no longer used. Therefore the replaced patches can be removed. It has several advantages: + Nops' structs will no longer be necessary and might be removed. This would save memory, restore performance (no ftrace handler), allow clear view on what is really patched. + Disabling the patch will cause using the original code everywhere. Therefore the livepatch callbacks could handle only one scenario. Note that the complication is already complex enough when the patch gets enabled. It is currently solved by calling callbacks only from the new cumulative patch. + The state is clean in both the sysfs interface and lsmod. The modules with the replaced livepatches might even get removed from the system. Some people actually expected this behavior from the beginning. After all a cumulative patch is supposed to "completely" replace an existing one. It is like when a new version of an application replaces an older one. This patch does the first step. It removes the replaced patches from the list of patches. It is safe. The consistency model ensures that they are no longer used. By other words, each process works only with the structures from klp_transition_patch. The removal is done by a special function. It combines actions done by __disable_patch() and klp_complete_transition(). But it is a fast track without all the transaction-related stuff. Signed-off-by: Jason Baron <jbaron@akamai.com> [pmladek@suse.com: Split, reuse existing code, simplified] Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-09 12:43:25 +00:00
bool replace;
/* internal */
struct list_head list;
struct kobject kobj;
struct list_head obj_list;
bool enabled;
bool forced;
livepatch: Simplify API by removing registration step The possibility to re-enable a registered patch was useful for immediate patches where the livepatch module had to stay until the system reboot. The improved consistency model allows to achieve the same result by unloading and loading the livepatch module again. Also we are going to add a feature called atomic replace. It will allow to create a patch that would replace all already registered patches. The aim is to handle dependent patches more securely. It will obsolete the stack of patches that helped to handle the dependencies so far. Then it might be unclear when a cumulative patch re-enabling is safe. It would be complicated to support the many modes. Instead we could actually make the API and code easier to understand. Therefore, remove the two step public API. All the checks and init calls are moved from klp_register_patch() to klp_enabled_patch(). Also the patch is automatically freed, including the sysfs interface when the transition to the disabled state is completed. As a result, there is never a disabled patch on the top of the stack. Therefore we do not need to check the stack in __klp_enable_patch(). And we could simplify the check in __klp_disable_patch(). Also the API and logic is much easier. It is enough to call klp_enable_patch() in module_init() call. The patch can be disabled by writing '0' into /sys/kernel/livepatch/<patch>/enabled. Then the module can be removed once the transition finishes and sysfs interface is freed. The only problem is how to free the structures and kobjects safely. The operation is triggered from the sysfs interface. We could not put the related kobject from there because it would cause lock inversion between klp_mutex and kernfs locks, see kn->count lockdep map. Therefore, offload the free task to a workqueue. It is perfectly fine: + The patch can no longer be used in the livepatch operations. + The module could not be removed until the free operation finishes and module_put() is called. + The operation is asynchronous already when the first klp_try_complete_transition() fails and another call is queued with a delay. Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-09 12:43:23 +00:00
struct work_struct free_work;
livepatch: allow removal of a disabled patch Currently we do not allow patch module to unload since there is no method to determine if a task is still running in the patched code. The consistency model gives us the way because when the unpatching finishes we know that all tasks were marked as safe to call an original function. Thus every new call to the function calls the original code and at the same time no task can be somewhere in the patched code, because it had to leave that code to be marked as safe. We can safely let the patch module go after that. Completion is used for synchronization between module removal and sysfs infrastructure in a similar way to commit 942e443127e9 ("module: Fix mod->mkobj.kobj potentially freed too early"). Note that we still do not allow the removal for immediate model, that is no consistency model. The module refcount may increase in this case if somebody disables and enables the patch several times. This should not cause any harm. With this change a call to try_module_get() is moved to __klp_enable_patch from klp_register_patch to make module reference counting symmetric (module_put() is in a patch disable path) and to allow to take a new reference to a disabled module when being enabled. Finally, we need to be very careful about possible races between klp_unregister_patch(), kobject_put() functions and operations on the related sysfs files. kobject_put(&patch->kobj) must be called without klp_mutex. Otherwise, it might be blocked by enabled_store() that needs the mutex as well. In addition, enabled_store() must check if the patch was not unregisted in the meantime. There is no need to do the same for other kobject_put() callsites at the moment. Their sysfs operations neither take the lock nor they access any data that might be freed in the meantime. There was an attempt to use kobjects the right way and prevent these races by design. But it made the patch definition more complicated and opened another can of worms. See https://lkml.kernel.org/r/1464018848-4303-1-git-send-email-pmladek@suse.com [Thanks to Petr Mladek for improving the commit message.] Signed-off-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-06 17:20:29 +00:00
struct completion finish;
};
#define klp_for_each_object_static(patch, obj) \
for (obj = patch->objs; obj->funcs || obj->name; obj++)
livepatch: Add atomic replace Sometimes we would like to revert a particular fix. Currently, this is not easy because we want to keep all other fixes active and we could revert only the last applied patch. One solution would be to apply new patch that implemented all the reverted functions like in the original code. It would work as expected but there will be unnecessary redirections. In addition, it would also require knowing which functions need to be reverted at build time. Another problem is when there are many patches that touch the same functions. There might be dependencies between patches that are not enforced on the kernel side. Also it might be pretty hard to actually prepare the patch and ensure compatibility with the other patches. Atomic replace && cumulative patches: A better solution would be to create cumulative patch and say that it replaces all older ones. This patch adds a new "replace" flag to struct klp_patch. When it is enabled, a set of 'nop' klp_func will be dynamically created for all functions that are already being patched but that will no longer be modified by the new patch. They are used as a new target during the patch transition. The idea is to handle Nops' structures like the static ones. When the dynamic structures are allocated, we initialize all values that are normally statically defined. The only exception is "new_func" in struct klp_func. It has to point to the original function and the address is known only when the object (module) is loaded. Note that we really need to set it. The address is used, for example, in klp_check_stack_func(). Nevertheless we still need to distinguish the dynamically allocated structures in some operations. For this, we add "nop" flag into struct klp_func and "dynamic" flag into struct klp_object. They need special handling in the following situations: + The structures are added into the lists of objects and functions immediately. In fact, the lists were created for this purpose. + The address of the original function is known only when the patched object (module) is loaded. Therefore it is copied later in klp_init_object_loaded(). + The ftrace handler must not set PC to func->new_func. It would cause infinite loop because the address points back to the beginning of the original function. + The various free() functions must free the structure itself. Note that other ways to detect the dynamic structures are not considered safe. For example, even the statically defined struct klp_object might include empty funcs array. It might be there just to run some callbacks. Also note that the safe iterator must be used in the free() functions. Otherwise already freed structures might get accessed. Special callbacks handling: The callbacks from the replaced patches are _not_ called by intention. It would be pretty hard to define a reasonable semantic and implement it. It might even be counter-productive. The new patch is cumulative. It is supposed to include most of the changes from older patches. In most cases, it will not want to call pre_unpatch() post_unpatch() callbacks from the replaced patches. It would disable/break things for no good reasons. Also it should be easier to handle various scenarios in a single script in the new patch than think about interactions caused by running many scripts from older patches. Not to say that the old scripts even would not expect to be called in this situation. Removing replaced patches: One nice effect of the cumulative patches is that the code from the older patches is no longer used. Therefore the replaced patches can be removed. It has several advantages: + Nops' structs will no longer be necessary and might be removed. This would save memory, restore performance (no ftrace handler), allow clear view on what is really patched. + Disabling the patch will cause using the original code everywhere. Therefore the livepatch callbacks could handle only one scenario. Note that the complication is already complex enough when the patch gets enabled. It is currently solved by calling callbacks only from the new cumulative patch. + The state is clean in both the sysfs interface and lsmod. The modules with the replaced livepatches might even get removed from the system. Some people actually expected this behavior from the beginning. After all a cumulative patch is supposed to "completely" replace an existing one. It is like when a new version of an application replaces an older one. This patch does the first step. It removes the replaced patches from the list of patches. It is safe. The consistency model ensures that they are no longer used. By other words, each process works only with the structures from klp_transition_patch. The removal is done by a special function. It combines actions done by __disable_patch() and klp_complete_transition(). But it is a fast track without all the transaction-related stuff. Signed-off-by: Jason Baron <jbaron@akamai.com> [pmladek@suse.com: Split, reuse existing code, simplified] Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-09 12:43:25 +00:00
#define klp_for_each_object_safe(patch, obj, tmp_obj) \
list_for_each_entry_safe(obj, tmp_obj, &patch->obj_list, node)
#define klp_for_each_object(patch, obj) \
list_for_each_entry(obj, &patch->obj_list, node)
#define klp_for_each_func_static(obj, func) \
for (func = obj->funcs; \
func->old_name || func->new_func || func->old_sympos; \
func++)
livepatch: Add atomic replace Sometimes we would like to revert a particular fix. Currently, this is not easy because we want to keep all other fixes active and we could revert only the last applied patch. One solution would be to apply new patch that implemented all the reverted functions like in the original code. It would work as expected but there will be unnecessary redirections. In addition, it would also require knowing which functions need to be reverted at build time. Another problem is when there are many patches that touch the same functions. There might be dependencies between patches that are not enforced on the kernel side. Also it might be pretty hard to actually prepare the patch and ensure compatibility with the other patches. Atomic replace && cumulative patches: A better solution would be to create cumulative patch and say that it replaces all older ones. This patch adds a new "replace" flag to struct klp_patch. When it is enabled, a set of 'nop' klp_func will be dynamically created for all functions that are already being patched but that will no longer be modified by the new patch. They are used as a new target during the patch transition. The idea is to handle Nops' structures like the static ones. When the dynamic structures are allocated, we initialize all values that are normally statically defined. The only exception is "new_func" in struct klp_func. It has to point to the original function and the address is known only when the object (module) is loaded. Note that we really need to set it. The address is used, for example, in klp_check_stack_func(). Nevertheless we still need to distinguish the dynamically allocated structures in some operations. For this, we add "nop" flag into struct klp_func and "dynamic" flag into struct klp_object. They need special handling in the following situations: + The structures are added into the lists of objects and functions immediately. In fact, the lists were created for this purpose. + The address of the original function is known only when the patched object (module) is loaded. Therefore it is copied later in klp_init_object_loaded(). + The ftrace handler must not set PC to func->new_func. It would cause infinite loop because the address points back to the beginning of the original function. + The various free() functions must free the structure itself. Note that other ways to detect the dynamic structures are not considered safe. For example, even the statically defined struct klp_object might include empty funcs array. It might be there just to run some callbacks. Also note that the safe iterator must be used in the free() functions. Otherwise already freed structures might get accessed. Special callbacks handling: The callbacks from the replaced patches are _not_ called by intention. It would be pretty hard to define a reasonable semantic and implement it. It might even be counter-productive. The new patch is cumulative. It is supposed to include most of the changes from older patches. In most cases, it will not want to call pre_unpatch() post_unpatch() callbacks from the replaced patches. It would disable/break things for no good reasons. Also it should be easier to handle various scenarios in a single script in the new patch than think about interactions caused by running many scripts from older patches. Not to say that the old scripts even would not expect to be called in this situation. Removing replaced patches: One nice effect of the cumulative patches is that the code from the older patches is no longer used. Therefore the replaced patches can be removed. It has several advantages: + Nops' structs will no longer be necessary and might be removed. This would save memory, restore performance (no ftrace handler), allow clear view on what is really patched. + Disabling the patch will cause using the original code everywhere. Therefore the livepatch callbacks could handle only one scenario. Note that the complication is already complex enough when the patch gets enabled. It is currently solved by calling callbacks only from the new cumulative patch. + The state is clean in both the sysfs interface and lsmod. The modules with the replaced livepatches might even get removed from the system. Some people actually expected this behavior from the beginning. After all a cumulative patch is supposed to "completely" replace an existing one. It is like when a new version of an application replaces an older one. This patch does the first step. It removes the replaced patches from the list of patches. It is safe. The consistency model ensures that they are no longer used. By other words, each process works only with the structures from klp_transition_patch. The removal is done by a special function. It combines actions done by __disable_patch() and klp_complete_transition(). But it is a fast track without all the transaction-related stuff. Signed-off-by: Jason Baron <jbaron@akamai.com> [pmladek@suse.com: Split, reuse existing code, simplified] Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-09 12:43:25 +00:00
#define klp_for_each_func_safe(obj, func, tmp_func) \
list_for_each_entry_safe(func, tmp_func, &obj->func_list, node)
#define klp_for_each_func(obj, func) \
list_for_each_entry(func, &obj->func_list, node)
int klp_enable_patch(struct klp_patch *);
/* Called from the module loader during module coming/going states */
int klp_module_coming(struct module *mod);
void klp_module_going(struct module *mod);
livepatch: change to a per-task consistency model Change livepatch to use a basic per-task consistency model. This is the foundation which will eventually enable us to patch those ~10% of security patches which change function or data semantics. This is the biggest remaining piece needed to make livepatch more generally useful. This code stems from the design proposal made by Vojtech [1] in November 2014. It's a hybrid of kGraft and kpatch: it uses kGraft's per-task consistency and syscall barrier switching combined with kpatch's stack trace switching. There are also a number of fallback options which make it quite flexible. Patches are applied on a per-task basis, when the task is deemed safe to switch over. When a patch is enabled, livepatch enters into a transition state where tasks are converging to the patched state. Usually this transition state can complete in a few seconds. The same sequence occurs when a patch is disabled, except the tasks converge from the patched state to the unpatched state. An interrupt handler inherits the patched state of the task it interrupts. The same is true for forked tasks: the child inherits the patched state of the parent. Livepatch uses several complementary approaches to determine when it's safe to patch tasks: 1. The first and most effective approach is stack checking of sleeping tasks. If no affected functions are on the stack of a given task, the task is patched. In most cases this will patch most or all of the tasks on the first try. Otherwise it'll keep trying periodically. This option is only available if the architecture has reliable stacks (HAVE_RELIABLE_STACKTRACE). 2. The second approach, if needed, is kernel exit switching. A task is switched when it returns to user space from a system call, a user space IRQ, or a signal. It's useful in the following cases: a) Patching I/O-bound user tasks which are sleeping on an affected function. In this case you have to send SIGSTOP and SIGCONT to force it to exit the kernel and be patched. b) Patching CPU-bound user tasks. If the task is highly CPU-bound then it will get patched the next time it gets interrupted by an IRQ. c) In the future it could be useful for applying patches for architectures which don't yet have HAVE_RELIABLE_STACKTRACE. In this case you would have to signal most of the tasks on the system. However this isn't supported yet because there's currently no way to patch kthreads without HAVE_RELIABLE_STACKTRACE. 3. For idle "swapper" tasks, since they don't ever exit the kernel, they instead have a klp_update_patch_state() call in the idle loop which allows them to be patched before the CPU enters the idle state. (Note there's not yet such an approach for kthreads.) All the above approaches may be skipped by setting the 'immediate' flag in the 'klp_patch' struct, which will disable per-task consistency and patch all tasks immediately. This can be useful if the patch doesn't change any function or data semantics. Note that, even with this flag set, it's possible that some tasks may still be running with an old version of the function, until that function returns. There's also an 'immediate' flag in the 'klp_func' struct which allows you to specify that certain functions in the patch can be applied without per-task consistency. This might be useful if you want to patch a common function like schedule(), and the function change doesn't need consistency but the rest of the patch does. For architectures which don't have HAVE_RELIABLE_STACKTRACE, the user must set patch->immediate which causes all tasks to be patched immediately. This option should be used with care, only when the patch doesn't change any function or data semantics. In the future, architectures which don't have HAVE_RELIABLE_STACKTRACE may be allowed to use per-task consistency if we can come up with another way to patch kthreads. The /sys/kernel/livepatch/<patch>/transition file shows whether a patch is in transition. Only a single patch (the topmost patch on the stack) can be in transition at a given time. A patch can remain in transition indefinitely, if any of the tasks are stuck in the initial patch state. A transition can be reversed and effectively canceled by writing the opposite value to the /sys/kernel/livepatch/<patch>/enabled file while the transition is in progress. Then all the tasks will attempt to converge back to the original patch state. [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Ingo Molnar <mingo@kernel.org> # for the scheduler changes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14 01:42:40 +00:00
void klp_copy_process(struct task_struct *child);
void klp_update_patch_state(struct task_struct *task);
livepatch: change to a per-task consistency model Change livepatch to use a basic per-task consistency model. This is the foundation which will eventually enable us to patch those ~10% of security patches which change function or data semantics. This is the biggest remaining piece needed to make livepatch more generally useful. This code stems from the design proposal made by Vojtech [1] in November 2014. It's a hybrid of kGraft and kpatch: it uses kGraft's per-task consistency and syscall barrier switching combined with kpatch's stack trace switching. There are also a number of fallback options which make it quite flexible. Patches are applied on a per-task basis, when the task is deemed safe to switch over. When a patch is enabled, livepatch enters into a transition state where tasks are converging to the patched state. Usually this transition state can complete in a few seconds. The same sequence occurs when a patch is disabled, except the tasks converge from the patched state to the unpatched state. An interrupt handler inherits the patched state of the task it interrupts. The same is true for forked tasks: the child inherits the patched state of the parent. Livepatch uses several complementary approaches to determine when it's safe to patch tasks: 1. The first and most effective approach is stack checking of sleeping tasks. If no affected functions are on the stack of a given task, the task is patched. In most cases this will patch most or all of the tasks on the first try. Otherwise it'll keep trying periodically. This option is only available if the architecture has reliable stacks (HAVE_RELIABLE_STACKTRACE). 2. The second approach, if needed, is kernel exit switching. A task is switched when it returns to user space from a system call, a user space IRQ, or a signal. It's useful in the following cases: a) Patching I/O-bound user tasks which are sleeping on an affected function. In this case you have to send SIGSTOP and SIGCONT to force it to exit the kernel and be patched. b) Patching CPU-bound user tasks. If the task is highly CPU-bound then it will get patched the next time it gets interrupted by an IRQ. c) In the future it could be useful for applying patches for architectures which don't yet have HAVE_RELIABLE_STACKTRACE. In this case you would have to signal most of the tasks on the system. However this isn't supported yet because there's currently no way to patch kthreads without HAVE_RELIABLE_STACKTRACE. 3. For idle "swapper" tasks, since they don't ever exit the kernel, they instead have a klp_update_patch_state() call in the idle loop which allows them to be patched before the CPU enters the idle state. (Note there's not yet such an approach for kthreads.) All the above approaches may be skipped by setting the 'immediate' flag in the 'klp_patch' struct, which will disable per-task consistency and patch all tasks immediately. This can be useful if the patch doesn't change any function or data semantics. Note that, even with this flag set, it's possible that some tasks may still be running with an old version of the function, until that function returns. There's also an 'immediate' flag in the 'klp_func' struct which allows you to specify that certain functions in the patch can be applied without per-task consistency. This might be useful if you want to patch a common function like schedule(), and the function change doesn't need consistency but the rest of the patch does. For architectures which don't have HAVE_RELIABLE_STACKTRACE, the user must set patch->immediate which causes all tasks to be patched immediately. This option should be used with care, only when the patch doesn't change any function or data semantics. In the future, architectures which don't have HAVE_RELIABLE_STACKTRACE may be allowed to use per-task consistency if we can come up with another way to patch kthreads. The /sys/kernel/livepatch/<patch>/transition file shows whether a patch is in transition. Only a single patch (the topmost patch on the stack) can be in transition at a given time. A patch can remain in transition indefinitely, if any of the tasks are stuck in the initial patch state. A transition can be reversed and effectively canceled by writing the opposite value to the /sys/kernel/livepatch/<patch>/enabled file while the transition is in progress. Then all the tasks will attempt to converge back to the original patch state. [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Ingo Molnar <mingo@kernel.org> # for the scheduler changes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14 01:42:40 +00:00
static inline bool klp_patch_pending(struct task_struct *task)
{
return test_tsk_thread_flag(task, TIF_PATCH_PENDING);
}
static inline bool klp_have_reliable_stack(void)
{
return IS_ENABLED(CONFIG_STACKTRACE) &&
IS_ENABLED(CONFIG_HAVE_RELIABLE_STACKTRACE);
}
livepatch: Initialize shadow variables safely by a custom callback The existing API allows to pass a sample data to initialize the shadow data. It works well when the data are position independent. But it fails miserably when we need to set a pointer to the shadow structure itself. Unfortunately, we might need to initialize the pointer surprisingly often because of struct list_head. It is even worse because the list might be hidden in other common structures, for example, struct mutex, struct wait_queue_head. For example, this was needed to fix races in ALSA sequencer. It required to add mutex into struct snd_seq_client. See commit b3defb791b26ea06 ("ALSA: seq: Make ioctls race-free") and commit d15d662e89fc667b9 ("ALSA: seq: Fix racy pool initializations") This patch makes the API more safe. A custom constructor function and data are passed to klp_shadow_*alloc() functions instead of the sample data. Note that ctor_data are no longer a template for shadow->data. It might point to any data that might be necessary when the constructor is called. Also note that the constructor is called under klp_shadow_lock. It is an internal spin_lock that synchronizes alloc() vs. get() operations, see klp_shadow_get_or_alloc(). On one hand, this adds a risk of ABBA deadlocks. On the other hand, it allows to do some operations safely. For example, we could add the new structure into an existing list. This must be done only once when the structure is allocated. Reported-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-16 11:36:46 +00:00
typedef int (*klp_shadow_ctor_t)(void *obj,
void *shadow_data,
void *ctor_data);
typedef void (*klp_shadow_dtor_t)(void *obj, void *shadow_data);
livepatch: Initialize shadow variables safely by a custom callback The existing API allows to pass a sample data to initialize the shadow data. It works well when the data are position independent. But it fails miserably when we need to set a pointer to the shadow structure itself. Unfortunately, we might need to initialize the pointer surprisingly often because of struct list_head. It is even worse because the list might be hidden in other common structures, for example, struct mutex, struct wait_queue_head. For example, this was needed to fix races in ALSA sequencer. It required to add mutex into struct snd_seq_client. See commit b3defb791b26ea06 ("ALSA: seq: Make ioctls race-free") and commit d15d662e89fc667b9 ("ALSA: seq: Fix racy pool initializations") This patch makes the API more safe. A custom constructor function and data are passed to klp_shadow_*alloc() functions instead of the sample data. Note that ctor_data are no longer a template for shadow->data. It might point to any data that might be necessary when the constructor is called. Also note that the constructor is called under klp_shadow_lock. It is an internal spin_lock that synchronizes alloc() vs. get() operations, see klp_shadow_get_or_alloc(). On one hand, this adds a risk of ABBA deadlocks. On the other hand, it allows to do some operations safely. For example, we could add the new structure into an existing list. This must be done only once when the structure is allocated. Reported-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-16 11:36:46 +00:00
void *klp_shadow_get(void *obj, unsigned long id);
livepatch: Initialize shadow variables safely by a custom callback The existing API allows to pass a sample data to initialize the shadow data. It works well when the data are position independent. But it fails miserably when we need to set a pointer to the shadow structure itself. Unfortunately, we might need to initialize the pointer surprisingly often because of struct list_head. It is even worse because the list might be hidden in other common structures, for example, struct mutex, struct wait_queue_head. For example, this was needed to fix races in ALSA sequencer. It required to add mutex into struct snd_seq_client. See commit b3defb791b26ea06 ("ALSA: seq: Make ioctls race-free") and commit d15d662e89fc667b9 ("ALSA: seq: Fix racy pool initializations") This patch makes the API more safe. A custom constructor function and data are passed to klp_shadow_*alloc() functions instead of the sample data. Note that ctor_data are no longer a template for shadow->data. It might point to any data that might be necessary when the constructor is called. Also note that the constructor is called under klp_shadow_lock. It is an internal spin_lock that synchronizes alloc() vs. get() operations, see klp_shadow_get_or_alloc(). On one hand, this adds a risk of ABBA deadlocks. On the other hand, it allows to do some operations safely. For example, we could add the new structure into an existing list. This must be done only once when the structure is allocated. Reported-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-16 11:36:46 +00:00
void *klp_shadow_alloc(void *obj, unsigned long id,
size_t size, gfp_t gfp_flags,
klp_shadow_ctor_t ctor, void *ctor_data);
void *klp_shadow_get_or_alloc(void *obj, unsigned long id,
size_t size, gfp_t gfp_flags,
klp_shadow_ctor_t ctor, void *ctor_data);
void klp_shadow_free(void *obj, unsigned long id, klp_shadow_dtor_t dtor);
void klp_shadow_free_all(unsigned long id, klp_shadow_dtor_t dtor);
livepatch: Basic API to track system state changes This is another step how to help maintaining more livepatches. One big help was the atomic replace and cumulative livepatches. These livepatches replace the already installed ones. Therefore it should be enough when each cumulative livepatch is consistent. The problems might come with shadow variables and callbacks. They might change the system behavior or state so that it is no longer safe to go back and use an older livepatch or the original kernel code. Also, a new livepatch must be able to detect changes which were made by the already installed livepatches. This is where the livepatch system state tracking gets useful. It allows to: - find whether a system state has already been modified by previous livepatches - store data needed to manipulate and restore the system state The information about the manipulated system states is stored in an array of struct klp_state. It can be searched by two new functions klp_get_state() and klp_get_prev_state(). The dependencies are going to be solved by a version field added later. The only important information is that it will be allowed to modify the same state by more non-cumulative livepatches. It is similar to allowing to modify the same function several times. The livepatch author is responsible for preventing incompatible changes. Link: http://lkml.kernel.org/r/20191030154313.13263-3-pmladek@suse.com To: Jiri Kosina <jikos@kernel.org> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Nicolai Stange <nstange@suse.de> Cc: live-patching@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-10-30 15:43:10 +00:00
struct klp_state *klp_get_state(struct klp_patch *patch, unsigned long id);
struct klp_state *klp_get_prev_state(unsigned long id);
livepatch: Apply vmlinux-specific KLP relocations early KLP relocations are livepatch-specific relocations which are applied to a KLP module's text or data. They exist for two reasons: 1) Unexported symbols: replacement functions often need to access unexported symbols (e.g. static functions), which "normal" relocations don't allow. 2) Late module patching: this is the ability for a KLP module to bypass normal module dependencies, such that the KLP module can be loaded *before* a to-be-patched module. This means that relocations which need to access symbols in the to-be-patched module might need to be applied to the KLP module well after it has been loaded. Non-late-patched KLP relocations are applied from the KLP module's init function. That usually works fine, unless the patched code wants to use alternatives, paravirt patching, jump tables, or some other special section which needs relocations. Then we run into ordering issues and crashes. In order for those special sections to work properly, the KLP relocations should be applied *before* the special section init code runs, such as apply_paravirt(), apply_alternatives(), or jump_label_apply_nops(). You might think the obvious solution would be to move the KLP relocation initialization earlier, but it's not necessarily that simple. The problem is the above-mentioned late module patching, for which KLP relocations can get applied well after the KLP module is loaded. To "fix" this issue in the past, we created .klp.arch sections: .klp.arch.{module}..altinstructions .klp.arch.{module}..parainstructions Those sections allow KLP late module patching code to call apply_paravirt() and apply_alternatives() after the module-specific KLP relocations (.klp.rela.{module}.{section}) have been applied. But that has a lot of drawbacks, including code complexity, the need for arch-specific code, and the (per-arch) danger that we missed some special section -- for example the __jump_table section which is used for jump labels. It turns out there's a simpler and more functional approach. There are two kinds of KLP relocation sections: 1) vmlinux-specific KLP relocation sections .klp.rela.vmlinux.{sec} These are relocations (applied to the KLP module) which reference unexported vmlinux symbols. 2) module-specific KLP relocation sections .klp.rela.{module}.{sec}: These are relocations (applied to the KLP module) which reference unexported or exported module symbols. Up until now, these have been treated the same. However, they're inherently different. Because of late module patching, module-specific KLP relocations can be applied very late, thus they can create the ordering headaches described above. But vmlinux-specific KLP relocations don't have that problem. There's nothing to prevent them from being applied earlier. So apply them at the same time as normal relocations, when the KLP module is being loaded. This means that for vmlinux-specific KLP relocations, we no longer have any ordering issues. vmlinux-referencing jump labels, alternatives, and paravirt patching will work automatically, without the need for the .klp.arch hacks. All that said, for module-specific KLP relocations, the ordering problems still exist and we *do* still need .klp.arch. Or do we? Stay tuned. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-29 15:24:44 +00:00
int klp_apply_section_relocs(struct module *pmod, Elf_Shdr *sechdrs,
const char *shstrtab, const char *strtab,
unsigned int symindex, unsigned int secindex,
const char *objname);
#else /* !CONFIG_LIVEPATCH */
static inline int klp_module_coming(struct module *mod) { return 0; }
static inline void klp_module_going(struct module *mod) {}
livepatch: change to a per-task consistency model Change livepatch to use a basic per-task consistency model. This is the foundation which will eventually enable us to patch those ~10% of security patches which change function or data semantics. This is the biggest remaining piece needed to make livepatch more generally useful. This code stems from the design proposal made by Vojtech [1] in November 2014. It's a hybrid of kGraft and kpatch: it uses kGraft's per-task consistency and syscall barrier switching combined with kpatch's stack trace switching. There are also a number of fallback options which make it quite flexible. Patches are applied on a per-task basis, when the task is deemed safe to switch over. When a patch is enabled, livepatch enters into a transition state where tasks are converging to the patched state. Usually this transition state can complete in a few seconds. The same sequence occurs when a patch is disabled, except the tasks converge from the patched state to the unpatched state. An interrupt handler inherits the patched state of the task it interrupts. The same is true for forked tasks: the child inherits the patched state of the parent. Livepatch uses several complementary approaches to determine when it's safe to patch tasks: 1. The first and most effective approach is stack checking of sleeping tasks. If no affected functions are on the stack of a given task, the task is patched. In most cases this will patch most or all of the tasks on the first try. Otherwise it'll keep trying periodically. This option is only available if the architecture has reliable stacks (HAVE_RELIABLE_STACKTRACE). 2. The second approach, if needed, is kernel exit switching. A task is switched when it returns to user space from a system call, a user space IRQ, or a signal. It's useful in the following cases: a) Patching I/O-bound user tasks which are sleeping on an affected function. In this case you have to send SIGSTOP and SIGCONT to force it to exit the kernel and be patched. b) Patching CPU-bound user tasks. If the task is highly CPU-bound then it will get patched the next time it gets interrupted by an IRQ. c) In the future it could be useful for applying patches for architectures which don't yet have HAVE_RELIABLE_STACKTRACE. In this case you would have to signal most of the tasks on the system. However this isn't supported yet because there's currently no way to patch kthreads without HAVE_RELIABLE_STACKTRACE. 3. For idle "swapper" tasks, since they don't ever exit the kernel, they instead have a klp_update_patch_state() call in the idle loop which allows them to be patched before the CPU enters the idle state. (Note there's not yet such an approach for kthreads.) All the above approaches may be skipped by setting the 'immediate' flag in the 'klp_patch' struct, which will disable per-task consistency and patch all tasks immediately. This can be useful if the patch doesn't change any function or data semantics. Note that, even with this flag set, it's possible that some tasks may still be running with an old version of the function, until that function returns. There's also an 'immediate' flag in the 'klp_func' struct which allows you to specify that certain functions in the patch can be applied without per-task consistency. This might be useful if you want to patch a common function like schedule(), and the function change doesn't need consistency but the rest of the patch does. For architectures which don't have HAVE_RELIABLE_STACKTRACE, the user must set patch->immediate which causes all tasks to be patched immediately. This option should be used with care, only when the patch doesn't change any function or data semantics. In the future, architectures which don't have HAVE_RELIABLE_STACKTRACE may be allowed to use per-task consistency if we can come up with another way to patch kthreads. The /sys/kernel/livepatch/<patch>/transition file shows whether a patch is in transition. Only a single patch (the topmost patch on the stack) can be in transition at a given time. A patch can remain in transition indefinitely, if any of the tasks are stuck in the initial patch state. A transition can be reversed and effectively canceled by writing the opposite value to the /sys/kernel/livepatch/<patch>/enabled file while the transition is in progress. Then all the tasks will attempt to converge back to the original patch state. [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Ingo Molnar <mingo@kernel.org> # for the scheduler changes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14 01:42:40 +00:00
static inline bool klp_patch_pending(struct task_struct *task) { return false; }
static inline void klp_update_patch_state(struct task_struct *task) {}
livepatch: change to a per-task consistency model Change livepatch to use a basic per-task consistency model. This is the foundation which will eventually enable us to patch those ~10% of security patches which change function or data semantics. This is the biggest remaining piece needed to make livepatch more generally useful. This code stems from the design proposal made by Vojtech [1] in November 2014. It's a hybrid of kGraft and kpatch: it uses kGraft's per-task consistency and syscall barrier switching combined with kpatch's stack trace switching. There are also a number of fallback options which make it quite flexible. Patches are applied on a per-task basis, when the task is deemed safe to switch over. When a patch is enabled, livepatch enters into a transition state where tasks are converging to the patched state. Usually this transition state can complete in a few seconds. The same sequence occurs when a patch is disabled, except the tasks converge from the patched state to the unpatched state. An interrupt handler inherits the patched state of the task it interrupts. The same is true for forked tasks: the child inherits the patched state of the parent. Livepatch uses several complementary approaches to determine when it's safe to patch tasks: 1. The first and most effective approach is stack checking of sleeping tasks. If no affected functions are on the stack of a given task, the task is patched. In most cases this will patch most or all of the tasks on the first try. Otherwise it'll keep trying periodically. This option is only available if the architecture has reliable stacks (HAVE_RELIABLE_STACKTRACE). 2. The second approach, if needed, is kernel exit switching. A task is switched when it returns to user space from a system call, a user space IRQ, or a signal. It's useful in the following cases: a) Patching I/O-bound user tasks which are sleeping on an affected function. In this case you have to send SIGSTOP and SIGCONT to force it to exit the kernel and be patched. b) Patching CPU-bound user tasks. If the task is highly CPU-bound then it will get patched the next time it gets interrupted by an IRQ. c) In the future it could be useful for applying patches for architectures which don't yet have HAVE_RELIABLE_STACKTRACE. In this case you would have to signal most of the tasks on the system. However this isn't supported yet because there's currently no way to patch kthreads without HAVE_RELIABLE_STACKTRACE. 3. For idle "swapper" tasks, since they don't ever exit the kernel, they instead have a klp_update_patch_state() call in the idle loop which allows them to be patched before the CPU enters the idle state. (Note there's not yet such an approach for kthreads.) All the above approaches may be skipped by setting the 'immediate' flag in the 'klp_patch' struct, which will disable per-task consistency and patch all tasks immediately. This can be useful if the patch doesn't change any function or data semantics. Note that, even with this flag set, it's possible that some tasks may still be running with an old version of the function, until that function returns. There's also an 'immediate' flag in the 'klp_func' struct which allows you to specify that certain functions in the patch can be applied without per-task consistency. This might be useful if you want to patch a common function like schedule(), and the function change doesn't need consistency but the rest of the patch does. For architectures which don't have HAVE_RELIABLE_STACKTRACE, the user must set patch->immediate which causes all tasks to be patched immediately. This option should be used with care, only when the patch doesn't change any function or data semantics. In the future, architectures which don't have HAVE_RELIABLE_STACKTRACE may be allowed to use per-task consistency if we can come up with another way to patch kthreads. The /sys/kernel/livepatch/<patch>/transition file shows whether a patch is in transition. Only a single patch (the topmost patch on the stack) can be in transition at a given time. A patch can remain in transition indefinitely, if any of the tasks are stuck in the initial patch state. A transition can be reversed and effectively canceled by writing the opposite value to the /sys/kernel/livepatch/<patch>/enabled file while the transition is in progress. Then all the tasks will attempt to converge back to the original patch state. [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Ingo Molnar <mingo@kernel.org> # for the scheduler changes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14 01:42:40 +00:00
static inline void klp_copy_process(struct task_struct *child) {}
livepatch: Apply vmlinux-specific KLP relocations early KLP relocations are livepatch-specific relocations which are applied to a KLP module's text or data. They exist for two reasons: 1) Unexported symbols: replacement functions often need to access unexported symbols (e.g. static functions), which "normal" relocations don't allow. 2) Late module patching: this is the ability for a KLP module to bypass normal module dependencies, such that the KLP module can be loaded *before* a to-be-patched module. This means that relocations which need to access symbols in the to-be-patched module might need to be applied to the KLP module well after it has been loaded. Non-late-patched KLP relocations are applied from the KLP module's init function. That usually works fine, unless the patched code wants to use alternatives, paravirt patching, jump tables, or some other special section which needs relocations. Then we run into ordering issues and crashes. In order for those special sections to work properly, the KLP relocations should be applied *before* the special section init code runs, such as apply_paravirt(), apply_alternatives(), or jump_label_apply_nops(). You might think the obvious solution would be to move the KLP relocation initialization earlier, but it's not necessarily that simple. The problem is the above-mentioned late module patching, for which KLP relocations can get applied well after the KLP module is loaded. To "fix" this issue in the past, we created .klp.arch sections: .klp.arch.{module}..altinstructions .klp.arch.{module}..parainstructions Those sections allow KLP late module patching code to call apply_paravirt() and apply_alternatives() after the module-specific KLP relocations (.klp.rela.{module}.{section}) have been applied. But that has a lot of drawbacks, including code complexity, the need for arch-specific code, and the (per-arch) danger that we missed some special section -- for example the __jump_table section which is used for jump labels. It turns out there's a simpler and more functional approach. There are two kinds of KLP relocation sections: 1) vmlinux-specific KLP relocation sections .klp.rela.vmlinux.{sec} These are relocations (applied to the KLP module) which reference unexported vmlinux symbols. 2) module-specific KLP relocation sections .klp.rela.{module}.{sec}: These are relocations (applied to the KLP module) which reference unexported or exported module symbols. Up until now, these have been treated the same. However, they're inherently different. Because of late module patching, module-specific KLP relocations can be applied very late, thus they can create the ordering headaches described above. But vmlinux-specific KLP relocations don't have that problem. There's nothing to prevent them from being applied earlier. So apply them at the same time as normal relocations, when the KLP module is being loaded. This means that for vmlinux-specific KLP relocations, we no longer have any ordering issues. vmlinux-referencing jump labels, alternatives, and paravirt patching will work automatically, without the need for the .klp.arch hacks. All that said, for module-specific KLP relocations, the ordering problems still exist and we *do* still need .klp.arch. Or do we? Stay tuned. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-29 15:24:44 +00:00
static inline
int klp_apply_section_relocs(struct module *pmod, Elf_Shdr *sechdrs,
const char *shstrtab, const char *strtab,
unsigned int symindex, unsigned int secindex,
const char *objname)
{
return 0;
}
#endif /* CONFIG_LIVEPATCH */
#endif /* _LINUX_LIVEPATCH_H_ */