linux-stable/mm/mprotect.c

897 lines
23 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* mm/mprotect.c
*
* (C) Copyright 1994 Linus Torvalds
* (C) Copyright 2002 Christoph Hellwig
*
* Address space accounting code <alan@lxorguk.ukuu.org.uk>
* (C) Copyright 2002 Red Hat Inc, All Rights Reserved
*/
#include <linux/pagewalk.h>
#include <linux/hugetlb.h>
#include <linux/shm.h>
#include <linux/mman.h>
#include <linux/fs.h>
#include <linux/highmem.h>
#include <linux/security.h>
#include <linux/mempolicy.h>
#include <linux/personality.h>
#include <linux/syscalls.h>
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
#include <linux/swap.h>
#include <linux/swapops.h>
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:29 +00:00
#include <linux/mmu_notifier.h>
#include <linux/migrate.h>
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
#include <linux/perf_event.h>
x86/pkeys: Allocation/free syscalls This patch adds two new system calls: int pkey_alloc(unsigned long flags, unsigned long init_access_rights) int pkey_free(int pkey); These implement an "allocator" for the protection keys themselves, which can be thought of as analogous to the allocator that the kernel has for file descriptors. The kernel tracks which numbers are in use, and only allows operations on keys that are valid. A key which was not obtained by pkey_alloc() may not, for instance, be passed to pkey_mprotect(). These system calls are also very important given the kernel's use of pkeys to implement execute-only support. These help ensure that userspace can never assume that it has control of a key unless it first asks the kernel. The kernel does not promise to preserve PKRU (right register) contents except for allocated pkeys. The 'init_access_rights' argument to pkey_alloc() specifies the rights that will be established for the returned pkey. For instance: pkey = pkey_alloc(flags, PKEY_DENY_WRITE); will allocate 'pkey', but also sets the bits in PKRU[1] such that writing to 'pkey' is already denied. The kernel does not prevent pkey_free() from successfully freeing in-use pkeys (those still assigned to a memory range by pkey_mprotect()). It would be expensive to implement the checks for this, so we instead say, "Just don't do it" since sane software will never do it anyway. Any piece of userspace calling pkey_alloc() needs to be prepared for it to fail. Why? pkey_alloc() returns the same error code (ENOSPC) when there are no pkeys and when pkeys are unsupported. They can be unsupported for a whole host of reasons, so apps must be prepared for this. Also, libraries or LD_PRELOADs might steal keys before an application gets access to them. This allocation mechanism could be implemented in userspace. Even if we did it in userspace, we would still need additional user/kernel interfaces to tell userspace which keys are being used by the kernel internally (such as for execute-only mappings). Having the kernel provide this facility completely removes the need for these additional interfaces, or having an implementation of this in userspace at all. Note that we have to make changes to all of the architectures that do not use mman-common.h because we use the new PKEY_DENY_ACCESS/WRITE macros in arch-independent code. 1. PKRU is the Protection Key Rights User register. It is a usermode-accessible register that controls whether writes and/or access to each individual pkey is allowed or denied. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 16:30:15 +00:00
#include <linux/pkeys.h>
#include <linux/ksm.h>
#include <linux/uaccess.h>
sched/numa: avoid trapping faults and attempting migration of file-backed dirty pages change_pte_range is called from task work context to mark PTEs for receiving NUMA faulting hints. If the marked pages are dirty then migration may fail. Some filesystems cannot migrate dirty pages without blocking so are skipped in MIGRATE_ASYNC mode which just wastes CPU. Even when they can, it can be a waste of cycles when the pages are shared forcing higher scan rates. This patch avoids marking shared dirty pages for hinting faults but also will skip a migration if the page was dirtied after the scanner updated a clean page. This is most noticeable running the NASA Parallel Benchmark when backed by btrfs, the default root filesystem for some distributions, but also noticeable when using XFS. The following are results from a 4-socket machine running a 4.16-rc4 kernel with some scheduler patches that are pending for the next merge window. 4.16.0-rc4 4.16.0-rc4 schedtip-20180309 nodirty-v1 Time cg.D 459.07 ( 0.00%) 444.21 ( 3.24%) Time ep.D 76.96 ( 0.00%) 77.69 ( -0.95%) Time is.D 25.55 ( 0.00%) 27.85 ( -9.00%) Time lu.D 601.58 ( 0.00%) 596.87 ( 0.78%) Time mg.D 107.73 ( 0.00%) 108.22 ( -0.45%) is.D regresses slightly in terms of absolute time but note that that particular load varies quite a bit from run to run. The more relevant observation is the total system CPU usage. 4.16.0-rc4 4.16.0-rc4 schedtip-20180309 nodirty-v1 User 71471.91 70627.04 System 11078.96 8256.13 Elapsed 661.66 632.74 That is a substantial drop in system CPU usage and overall the workload completes faster. The NUMA balancing statistics are also interesting NUMA base PTE updates 111407972 139848884 NUMA huge PMD updates 206506 264869 NUMA page range updates 217139044 275461812 NUMA hint faults 4300924 3719784 NUMA hint local faults 3012539 3416618 NUMA hint local percent 70 91 NUMA pages migrated 1517487 1358420 While more PTEs are scanned due to changes in what faults are gathered, it's clear that a far higher percentage of faults are local as the bulk of the remote hits were dirty pages that, in this case with btrfs, had no chance of migrating. The following is a comparison when using XFS as that is a more realistic filesystem choice for a data partition 4.16.0-rc4 4.16.0-rc4 schedtip-20180309 nodirty-v1r47 Time cg.D 485.28 ( 0.00%) 442.62 ( 8.79%) Time ep.D 77.68 ( 0.00%) 77.54 ( 0.18%) Time is.D 26.44 ( 0.00%) 24.79 ( 6.24%) Time lu.D 597.46 ( 0.00%) 597.11 ( 0.06%) Time mg.D 142.65 ( 0.00%) 105.83 ( 25.81%) That is a reasonable gain on two relatively long-lived workloads. While not presented, there is also a substantial drop in system CPu usage and the NUMA balancing stats show similar improvements in locality as btrfs did. Link: http://lkml.kernel.org/r/20180326094334.zserdec62gwmmfqf@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:20 +00:00
#include <linux/mm_inline.h>
mm: introduce include/linux/pgtable.h The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:32:38 +00:00
#include <linux/pgtable.h>
memory tiering: skip to scan fast memory If the NUMA balancing isn't used to optimize the page placement among sockets but only among memory types, the hot pages in the fast memory node couldn't be migrated (promoted) to anywhere. So it's unnecessary to scan the pages in the fast memory node via changing their PTE/PMD mapping to be PROT_NONE. So that the page faults could be avoided too. In the test, if only the memory tiering NUMA balancing mode is enabled, the number of the NUMA balancing hint faults for the DRAM node is reduced to almost 0 with the patch. While the benchmark score doesn't change visibly. Link: https://lkml.kernel.org/r/20220221084529.1052339-4-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:46:27 +00:00
#include <linux/sched/sysctl.h>
mm/shmem: allow uffd wr-protect none pte for file-backed mem File-backed memory differs from anonymous memory in that even if the pte is missing, the data could still resides either in the file or in page/swap cache. So when wr-protect a pte, we need to consider none ptes too. We do that by installing the uffd-wp pte markers when necessary. So when there's a future write to the pte, the fault handler will go the special path to first fault-in the page as read-only, then report to userfaultfd server with the wr-protect message. On the other hand, when unprotecting a page, it's also possible that the pte got unmapped but replaced by the special uffd-wp marker. Then we'll need to be able to recover from a uffd-wp pte marker into a none pte, so that the next access to the page will fault in correctly as usual when accessed the next time. Special care needs to be taken throughout the change_protection_range() process. Since now we allow user to wr-protect a none pte, we need to be able to pre-populate the page table entries if we see (!anonymous && MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always skip when the pgtable entry does not exist. For example, the pgtable can be missing for a whole chunk of 2M pmd, but the page cache can exist for the 2M range. When we want to wr-protect one 4K page within the 2M pmd range, we need to pre-populate the pgtable and install the pte marker showing that we want to get a message and block the thread when the page cache of that 4K page is written. Without pre-populating the pmd, change_protection() will simply skip that whole pmd. Note that this patch only covers the small pages (pte level) but not covering any of the transparent huge pages yet. That will be done later, and this patch will be a preparation for it too. Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
#include <linux/userfaultfd_k.h>
mm/demotion: update node_is_toptier to work with memory tiers With memory tier support we can have memory only NUMA nodes in the top tier from which we want to avoid promotion tracking NUMA faults. Update node_is_toptier to work with memory tiers. All NUMA nodes are by default top tier nodes. With lower(slower) memory tiers added we consider all memory tiers above a memory tier having CPU NUMA nodes as a top memory tier [sj@kernel.org: include missed header file, memory-tiers.h] Link: https://lkml.kernel.org/r/20220820190720.248704-1-sj@kernel.org [akpm@linux-foundation.org: mm/memory.c needs linux/memory-tiers.h] [aneesh.kumar@linux.ibm.com: make toptier_distance inclusive upper bound of toptiers] Link: https://lkml.kernel.org/r/20220830081457.118960-1-aneesh.kumar@linux.ibm.com Link: https://lkml.kernel.org/r/20220818131042.113280-10-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Wei Xu <weixugc@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Bharata B Rao <bharata@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hesham Almatary <hesham.almatary@huawei.com> Cc: Jagdish Gediya <jvgediya.oss@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-18 13:10:41 +00:00
#include <linux/memory-tiers.h>
#include <asm/cacheflush.h>
x86/pkeys: Allocation/free syscalls This patch adds two new system calls: int pkey_alloc(unsigned long flags, unsigned long init_access_rights) int pkey_free(int pkey); These implement an "allocator" for the protection keys themselves, which can be thought of as analogous to the allocator that the kernel has for file descriptors. The kernel tracks which numbers are in use, and only allows operations on keys that are valid. A key which was not obtained by pkey_alloc() may not, for instance, be passed to pkey_mprotect(). These system calls are also very important given the kernel's use of pkeys to implement execute-only support. These help ensure that userspace can never assume that it has control of a key unless it first asks the kernel. The kernel does not promise to preserve PKRU (right register) contents except for allocated pkeys. The 'init_access_rights' argument to pkey_alloc() specifies the rights that will be established for the returned pkey. For instance: pkey = pkey_alloc(flags, PKEY_DENY_WRITE); will allocate 'pkey', but also sets the bits in PKRU[1] such that writing to 'pkey' is already denied. The kernel does not prevent pkey_free() from successfully freeing in-use pkeys (those still assigned to a memory range by pkey_mprotect()). It would be expensive to implement the checks for this, so we instead say, "Just don't do it" since sane software will never do it anyway. Any piece of userspace calling pkey_alloc() needs to be prepared for it to fail. Why? pkey_alloc() returns the same error code (ENOSPC) when there are no pkeys and when pkeys are unsupported. They can be unsupported for a whole host of reasons, so apps must be prepared for this. Also, libraries or LD_PRELOADs might steal keys before an application gets access to them. This allocation mechanism could be implemented in userspace. Even if we did it in userspace, we would still need additional user/kernel interfaces to tell userspace which keys are being used by the kernel internally (such as for execute-only mappings). Having the kernel provide this facility completely removes the need for these additional interfaces, or having an implementation of this in userspace at all. Note that we have to make changes to all of the architectures that do not use mman-common.h because we use the new PKEY_DENY_ACCESS/WRITE macros in arch-independent code. 1. PKRU is the Protection Key Rights User register. It is a usermode-accessible register that controls whether writes and/or access to each individual pkey is allowed or denied. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 16:30:15 +00:00
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
#include <asm/tlb.h>
mm: fix mprotect() behaviour on VM_LOCKED VMAs On mlock(2) we trigger COW on private writable VMA to avoid faults in future. mm/gup.c: 840 long populate_vma_page_range(struct vm_area_struct *vma, 841 unsigned long start, unsigned long end, int *nonblocking) 842 { ... 855 * We want to touch writable mappings with a write fault in order 856 * to break COW, except for shared mappings because these don't COW 857 * and we would not want to dirty them for nothing. 858 */ 859 if ((vma->vm_flags & (VM_WRITE | VM_SHARED)) == VM_WRITE) 860 gup_flags |= FOLL_WRITE; But we miss this case when we make VM_LOCKED VMA writeable via mprotect(2). The test case: #define _GNU_SOURCE #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #include <sys/resource.h> #include <sys/stat.h> #include <sys/time.h> #include <sys/types.h> #define PAGE_SIZE 4096 int main(int argc, char **argv) { struct rusage usage; long before; char *p; int fd; /* Create a file and populate first page of page cache */ fd = open("/tmp", O_TMPFILE | O_RDWR, S_IRUSR | S_IWUSR); write(fd, "1", 1); /* Create a *read-only* *private* mapping of the file */ p = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_PRIVATE, fd, 0); /* * Since the mapping is read-only, mlock() will populate the mapping * with PTEs pointing to page cache without triggering COW. */ mlock(p, PAGE_SIZE); /* * Mapping became read-write, but it's still populated with PTEs * pointing to page cache. */ mprotect(p, PAGE_SIZE, PROT_READ | PROT_WRITE); getrusage(RUSAGE_SELF, &usage); before = usage.ru_minflt; /* Trigger COW: fault in mlock()ed VMA. */ *p = 1; getrusage(RUSAGE_SELF, &usage); printf("faults: %ld\n", usage.ru_minflt - before); return 0; } $ ./test faults: 1 Let's fix it by triggering populating of VMA in mprotect_fixup() on this condition. We don't care about population error as we don't in other similar cases i.e. mremap. [akpm@linux-foundation.org: tweak comment text] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:56:10 +00:00
#include "internal.h"
mm/autonuma: use can_change_(pte|pmd)_writable() to replace savedwrite commit b191f9b106ea ("mm: numa: preserve PTE write permissions across a NUMA hinting fault") added remembering write permissions using ordinary pte_write() for PROT_NONE mapped pages to avoid write faults when remapping the page !PROT_NONE on NUMA hinting faults. That commit noted: The patch looks hacky but the alternatives looked worse. The tidest was to rewalk the page tables after a hinting fault but it was more complex than this approach and the performance was worse. It's not generally safe to just mark the page writable during the fault if it's a write fault as it may have been read-only for COW so that approach was discarded. Later, commit 288bc54949fc ("mm/autonuma: let architecture override how the write bit should be stashed in a protnone pte.") introduced a family of savedwrite PTE functions that didn't necessarily improve the whole situation. One confusing thing is that nowadays, if a page is pte_protnone() and pte_savedwrite() then also pte_write() is true. Another source of confusion is that there is only a single pte_mk_savedwrite() call in the kernel. All other write-protection code seems to silently rely on pte_wrprotect(). Ever since PageAnonExclusive was introduced and we started using it in mprotect context via commit 64fe24a3e05e ("mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection"), we do have machinery in place to avoid write faults when changing protection, which is exactly what we want to do here. Let's similarly do what ordinary mprotect() does nowadays when upgrading write permissions and reuse can_change_pte_writable() and can_change_pmd_writable() to detect if we can upgrade PTE permissions to be writable. For anonymous pages there should be absolutely no change: if an anonymous page is not exclusive, it could not have been mapped writable -- because only exclusive anonymous pages can be mapped writable. However, there *might* be a change for writable shared mappings that require writenotify: if they are not dirty, we cannot map them writable. While it might not matter in practice, we'd need a different way to identify whether writenotify is actually required -- and ordinary mprotect would benefit from that as well. Note that we don't optimize for the actual migration case: (1) When migration succeeds the new PTE will not be writable because the source PTE was not writable (protnone); in the future we might just optimize that case similarly by reusing can_change_pte_writable()/can_change_pmd_writable() when removing migration PTEs. (2) When migration fails, we'd have to recalculate the "writable" flag because we temporarily dropped the PT lock; for now keep it simple and set "writable=false". We'll remove all savedwrite leftovers next. Link: https://lkml.kernel.org/r/20221108174652.198904-6-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Hugh Dickins <hughd@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-08 17:46:50 +00:00
bool can_change_pte_writable(struct vm_area_struct *vma, unsigned long addr,
pte_t pte)
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we can try mapping anonymous pages in a private writable mapping writable if they are exclusive, the PTE is already dirty, and no special handling applies. Mapping the anonymous page writable is essentially the same thing the write fault handler would do in this case. Special handling is required for uffd-wp and softdirty tracking, so take care of that properly. Also, leave PROT_NONE handling alone for now; in the future, we could similarly extend the logic in do_numa_page() or use pte_mk_savedwrite() here. While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE) performance, it should also be a valuable optimization for uffd-wp, when un-protecting. This has been previously suggested by Peter Collingbourne in [1], relevant in the context of the Scudo memory allocator, before we had PageAnonExclusive. This commit doesn't add the same handling for PMDs (i.e., anonymous THP, anonymous hugetlb); benchmark results from Andrea indicate that there are minor performance gains, so it's might still be valuable to streamline that logic for all anonymous pages in the future. As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually happening. Micro-benchmark courtesy of Andrea: === #define _GNU_SOURCE #include <sys/mman.h> #include <stdlib.h> #include <string.h> #include <stdio.h> #include <unistd.h> #define SIZE (1024*1024*1024) int main(int argc, char *argv[]) { char *p; if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE)) perror("posix_memalign"), exit(1); if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE)) perror("madvise"); explicit_bzero(p, SIZE); for (int loops = 0; loops < 40; loops++) { if (mprotect(p, SIZE, PROT_READ)) perror("mprotect"), exit(1); if (mprotect(p, SIZE, PROT_READ|PROT_WRITE)) perror("mprotect"), exit(1); explicit_bzero(p, SIZE); } } === Results on my Ryzen 9 3900X: Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043 Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026 === [1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Suggested-by: Peter Collingbourne <pcc@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 09:36:29 +00:00
{
struct page *page;
if (WARN_ON_ONCE(!(vma->vm_flags & VM_WRITE)))
return false;
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we can try mapping anonymous pages in a private writable mapping writable if they are exclusive, the PTE is already dirty, and no special handling applies. Mapping the anonymous page writable is essentially the same thing the write fault handler would do in this case. Special handling is required for uffd-wp and softdirty tracking, so take care of that properly. Also, leave PROT_NONE handling alone for now; in the future, we could similarly extend the logic in do_numa_page() or use pte_mk_savedwrite() here. While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE) performance, it should also be a valuable optimization for uffd-wp, when un-protecting. This has been previously suggested by Peter Collingbourne in [1], relevant in the context of the Scudo memory allocator, before we had PageAnonExclusive. This commit doesn't add the same handling for PMDs (i.e., anonymous THP, anonymous hugetlb); benchmark results from Andrea indicate that there are minor performance gains, so it's might still be valuable to streamline that logic for all anonymous pages in the future. As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually happening. Micro-benchmark courtesy of Andrea: === #define _GNU_SOURCE #include <sys/mman.h> #include <stdlib.h> #include <string.h> #include <stdio.h> #include <unistd.h> #define SIZE (1024*1024*1024) int main(int argc, char *argv[]) { char *p; if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE)) perror("posix_memalign"), exit(1); if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE)) perror("madvise"); explicit_bzero(p, SIZE); for (int loops = 0; loops < 40; loops++) { if (mprotect(p, SIZE, PROT_READ)) perror("mprotect"), exit(1); if (mprotect(p, SIZE, PROT_READ|PROT_WRITE)) perror("mprotect"), exit(1); explicit_bzero(p, SIZE); } } === Results on my Ryzen 9 3900X: Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043 Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026 === [1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Suggested-by: Peter Collingbourne <pcc@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 09:36:29 +00:00
/* Don't touch entries that are not even readable. */
mm/mprotect: allow clean exclusive anon pages to be writable Patch series "mm/autonuma: replace savedwrite infrastructure", v2. As discussed in my talk at LPC, we can reuse the same mechanism for deciding whether to map a pte writable when upgrading permissions via mprotect() -- e.g., PROT_READ -> PROT_READ|PROT_WRITE -- to replace the savedwrite infrastructure used for NUMA hinting faults (e.g., PROT_NONE -> PROT_READ|PROT_WRITE). Instead of maintaining previous write permissions for a pte/pmd, we re-determine if the pte/pmd can be writable. The big benefit is that we have a common logic for deciding whether we can map a pte/pmd writable on protection changes. For private mappings, there should be no difference -- from what I understand, that is what autonuma benchmarks care about. I ran autonumabench for v1 on a system with 2 NUMA nodes, 96 GiB each via: perf stat --null --repeat 10 The numa01 benchmark is quite noisy in my environment and I failed to reduce the noise so far. numa01: mm-unstable: 146.88 +- 6.54 seconds time elapsed ( +- 4.45% ) mm-unstable++: 147.45 +- 13.39 seconds time elapsed ( +- 9.08% ) numa02: mm-unstable: 16.0300 +- 0.0624 seconds time elapsed ( +- 0.39% ) mm-unstable++: 16.1281 +- 0.0945 seconds time elapsed ( +- 0.59% ) It is worth noting that for shared writable mappings that require writenotify, we will only avoid write faults if the pte/pmd is dirty (inherited from the older mprotect logic). If we ever care about optimizing that further, we'd need a different mechanism to identify whether the FS still needs to get notified on the next write access. In any case, such an optimization will then not be autonuma-specific, but mprotect() permission upgrades would similarly benefit from it. This patch (of 7): Anonymous pages might have the dirty bit clear, but this should not prevent mprotect from making them writable if they are exclusive. Therefore, skip the test whether the page is dirty in this case. Note that there are already other ways to get a writable PTE mapping an anonymous page that is clean: for example, via MADV_FREE. In an ideal world, we'd have a different indication from the FS whether writenotify is still required. [david@redhat.com: return directly; update description] Link: https://lkml.kernel.org/r/20221108174652.198904-1-david@redhat.com Link: https://lkml.kernel.org/r/20221108174652.198904-2-david@redhat.com Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Dave Chinner <david@fromorbit.com> Cc: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-08 17:46:46 +00:00
if (pte_protnone(pte))
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we can try mapping anonymous pages in a private writable mapping writable if they are exclusive, the PTE is already dirty, and no special handling applies. Mapping the anonymous page writable is essentially the same thing the write fault handler would do in this case. Special handling is required for uffd-wp and softdirty tracking, so take care of that properly. Also, leave PROT_NONE handling alone for now; in the future, we could similarly extend the logic in do_numa_page() or use pte_mk_savedwrite() here. While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE) performance, it should also be a valuable optimization for uffd-wp, when un-protecting. This has been previously suggested by Peter Collingbourne in [1], relevant in the context of the Scudo memory allocator, before we had PageAnonExclusive. This commit doesn't add the same handling for PMDs (i.e., anonymous THP, anonymous hugetlb); benchmark results from Andrea indicate that there are minor performance gains, so it's might still be valuable to streamline that logic for all anonymous pages in the future. As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually happening. Micro-benchmark courtesy of Andrea: === #define _GNU_SOURCE #include <sys/mman.h> #include <stdlib.h> #include <string.h> #include <stdio.h> #include <unistd.h> #define SIZE (1024*1024*1024) int main(int argc, char *argv[]) { char *p; if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE)) perror("posix_memalign"), exit(1); if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE)) perror("madvise"); explicit_bzero(p, SIZE); for (int loops = 0; loops < 40; loops++) { if (mprotect(p, SIZE, PROT_READ)) perror("mprotect"), exit(1); if (mprotect(p, SIZE, PROT_READ|PROT_WRITE)) perror("mprotect"), exit(1); explicit_bzero(p, SIZE); } } === Results on my Ryzen 9 3900X: Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043 Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026 === [1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Suggested-by: Peter Collingbourne <pcc@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 09:36:29 +00:00
return false;
/* Do we need write faults for softdirty tracking? */
mm/mprotect: fix soft-dirty check in can_change_pte_writable() Patch series "mm/mprotect: Fix soft-dirty checks", v4. This patch (of 3): The check wanted to make sure when soft-dirty tracking is enabled we won't grant write bit by accident, as a page fault is needed for dirty tracking. The intention is correct but we didn't check it right because VM_SOFTDIRTY set actually means soft-dirty tracking disabled. Fix it. There's another thing tricky about soft-dirty is that, we can't check the vma flag !(vma_flags & VM_SOFTDIRTY) directly but only check it after we checked CONFIG_MEM_SOFT_DIRTY because otherwise VM_SOFTDIRTY will be defined as zero, and !(vma_flags & VM_SOFTDIRTY) will constantly return true. To avoid misuse, introduce a helper for checking whether vma has soft-dirty tracking enabled. We can easily verify this with any exclusive anonymous page, like program below: =======8<====== #include <stdio.h> #include <unistd.h> #include <stdlib.h> #include <assert.h> #include <inttypes.h> #include <stdint.h> #include <sys/types.h> #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <unistd.h> #include <fcntl.h> #include <stdbool.h> #define BIT_ULL(nr) (1ULL << (nr)) #define PM_SOFT_DIRTY BIT_ULL(55) unsigned int psize; char *page; uint64_t pagemap_read_vaddr(int fd, void *vaddr) { uint64_t value; int ret; ret = pread(fd, &value, sizeof(uint64_t), ((uint64_t)vaddr >> 12) * sizeof(uint64_t)); assert(ret == sizeof(uint64_t)); return value; } void clear_refs_write(void) { int fd = open("/proc/self/clear_refs", O_RDWR); assert(fd >= 0); write(fd, "4", 2); close(fd); } #define check_soft_dirty(str, expect) do { \ bool dirty = pagemap_read_vaddr(fd, page) & PM_SOFT_DIRTY; \ if (dirty != expect) { \ printf("ERROR: %s, soft-dirty=%d (expect: %d) ", str, dirty, expect); \ exit(-1); \ } \ } while (0) int main(void) { int fd = open("/proc/self/pagemap", O_RDONLY); assert(fd >= 0); psize = getpagesize(); page = mmap(NULL, psize, PROT_READ|PROT_WRITE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); assert(page != MAP_FAILED); *page = 1; check_soft_dirty("Just faulted in page", 1); clear_refs_write(); check_soft_dirty("Clear_refs written", 0); mprotect(page, psize, PROT_READ); check_soft_dirty("Marked RO", 0); mprotect(page, psize, PROT_READ|PROT_WRITE); check_soft_dirty("Marked RW", 0); *page = 2; check_soft_dirty("Wrote page again", 1); munmap(page, psize); close(fd); printf("Test passed. "); return 0; } =======8<====== Here we attach a Fixes to commit 64fe24a3e05e only for easy tracking, as this patch won't apply to a tree before that point. However the commit wasn't the source of problem, but instead 64e455079e1b. It's just that after 64fe24a3e05e anonymous memory will also suffer from this problem with mprotect(). Link: https://lkml.kernel.org/r/20220725142048.30450-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220725142048.30450-2-peterx@redhat.com Fixes: 64e455079e1b ("mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared") Fixes: 64fe24a3e05e ("mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-25 14:20:46 +00:00
if (vma_soft_dirty_enabled(vma) && !pte_soft_dirty(pte))
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we can try mapping anonymous pages in a private writable mapping writable if they are exclusive, the PTE is already dirty, and no special handling applies. Mapping the anonymous page writable is essentially the same thing the write fault handler would do in this case. Special handling is required for uffd-wp and softdirty tracking, so take care of that properly. Also, leave PROT_NONE handling alone for now; in the future, we could similarly extend the logic in do_numa_page() or use pte_mk_savedwrite() here. While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE) performance, it should also be a valuable optimization for uffd-wp, when un-protecting. This has been previously suggested by Peter Collingbourne in [1], relevant in the context of the Scudo memory allocator, before we had PageAnonExclusive. This commit doesn't add the same handling for PMDs (i.e., anonymous THP, anonymous hugetlb); benchmark results from Andrea indicate that there are minor performance gains, so it's might still be valuable to streamline that logic for all anonymous pages in the future. As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually happening. Micro-benchmark courtesy of Andrea: === #define _GNU_SOURCE #include <sys/mman.h> #include <stdlib.h> #include <string.h> #include <stdio.h> #include <unistd.h> #define SIZE (1024*1024*1024) int main(int argc, char *argv[]) { char *p; if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE)) perror("posix_memalign"), exit(1); if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE)) perror("madvise"); explicit_bzero(p, SIZE); for (int loops = 0; loops < 40; loops++) { if (mprotect(p, SIZE, PROT_READ)) perror("mprotect"), exit(1); if (mprotect(p, SIZE, PROT_READ|PROT_WRITE)) perror("mprotect"), exit(1); explicit_bzero(p, SIZE); } } === Results on my Ryzen 9 3900X: Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043 Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026 === [1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Suggested-by: Peter Collingbourne <pcc@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 09:36:29 +00:00
return false;
/* Do we need write faults for uffd-wp tracking? */
if (userfaultfd_pte_wp(vma, pte))
return false;
if (!(vma->vm_flags & VM_SHARED)) {
/*
* Writable MAP_PRIVATE mapping: We can only special-case on
* exclusive anonymous pages, because we know that our
* write-fault handler similarly would map them writable without
* any additional checks while holding the PT lock.
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we can try mapping anonymous pages in a private writable mapping writable if they are exclusive, the PTE is already dirty, and no special handling applies. Mapping the anonymous page writable is essentially the same thing the write fault handler would do in this case. Special handling is required for uffd-wp and softdirty tracking, so take care of that properly. Also, leave PROT_NONE handling alone for now; in the future, we could similarly extend the logic in do_numa_page() or use pte_mk_savedwrite() here. While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE) performance, it should also be a valuable optimization for uffd-wp, when un-protecting. This has been previously suggested by Peter Collingbourne in [1], relevant in the context of the Scudo memory allocator, before we had PageAnonExclusive. This commit doesn't add the same handling for PMDs (i.e., anonymous THP, anonymous hugetlb); benchmark results from Andrea indicate that there are minor performance gains, so it's might still be valuable to streamline that logic for all anonymous pages in the future. As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually happening. Micro-benchmark courtesy of Andrea: === #define _GNU_SOURCE #include <sys/mman.h> #include <stdlib.h> #include <string.h> #include <stdio.h> #include <unistd.h> #define SIZE (1024*1024*1024) int main(int argc, char *argv[]) { char *p; if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE)) perror("posix_memalign"), exit(1); if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE)) perror("madvise"); explicit_bzero(p, SIZE); for (int loops = 0; loops < 40; loops++) { if (mprotect(p, SIZE, PROT_READ)) perror("mprotect"), exit(1); if (mprotect(p, SIZE, PROT_READ|PROT_WRITE)) perror("mprotect"), exit(1); explicit_bzero(p, SIZE); } } === Results on my Ryzen 9 3900X: Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043 Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026 === [1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Suggested-by: Peter Collingbourne <pcc@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 09:36:29 +00:00
*/
page = vm_normal_page(vma, addr, pte);
mm/mprotect: allow clean exclusive anon pages to be writable Patch series "mm/autonuma: replace savedwrite infrastructure", v2. As discussed in my talk at LPC, we can reuse the same mechanism for deciding whether to map a pte writable when upgrading permissions via mprotect() -- e.g., PROT_READ -> PROT_READ|PROT_WRITE -- to replace the savedwrite infrastructure used for NUMA hinting faults (e.g., PROT_NONE -> PROT_READ|PROT_WRITE). Instead of maintaining previous write permissions for a pte/pmd, we re-determine if the pte/pmd can be writable. The big benefit is that we have a common logic for deciding whether we can map a pte/pmd writable on protection changes. For private mappings, there should be no difference -- from what I understand, that is what autonuma benchmarks care about. I ran autonumabench for v1 on a system with 2 NUMA nodes, 96 GiB each via: perf stat --null --repeat 10 The numa01 benchmark is quite noisy in my environment and I failed to reduce the noise so far. numa01: mm-unstable: 146.88 +- 6.54 seconds time elapsed ( +- 4.45% ) mm-unstable++: 147.45 +- 13.39 seconds time elapsed ( +- 9.08% ) numa02: mm-unstable: 16.0300 +- 0.0624 seconds time elapsed ( +- 0.39% ) mm-unstable++: 16.1281 +- 0.0945 seconds time elapsed ( +- 0.59% ) It is worth noting that for shared writable mappings that require writenotify, we will only avoid write faults if the pte/pmd is dirty (inherited from the older mprotect logic). If we ever care about optimizing that further, we'd need a different mechanism to identify whether the FS still needs to get notified on the next write access. In any case, such an optimization will then not be autonuma-specific, but mprotect() permission upgrades would similarly benefit from it. This patch (of 7): Anonymous pages might have the dirty bit clear, but this should not prevent mprotect from making them writable if they are exclusive. Therefore, skip the test whether the page is dirty in this case. Note that there are already other ways to get a writable PTE mapping an anonymous page that is clean: for example, via MADV_FREE. In an ideal world, we'd have a different indication from the FS whether writenotify is still required. [david@redhat.com: return directly; update description] Link: https://lkml.kernel.org/r/20221108174652.198904-1-david@redhat.com Link: https://lkml.kernel.org/r/20221108174652.198904-2-david@redhat.com Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Dave Chinner <david@fromorbit.com> Cc: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-08 17:46:46 +00:00
return page && PageAnon(page) && PageAnonExclusive(page);
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we can try mapping anonymous pages in a private writable mapping writable if they are exclusive, the PTE is already dirty, and no special handling applies. Mapping the anonymous page writable is essentially the same thing the write fault handler would do in this case. Special handling is required for uffd-wp and softdirty tracking, so take care of that properly. Also, leave PROT_NONE handling alone for now; in the future, we could similarly extend the logic in do_numa_page() or use pte_mk_savedwrite() here. While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE) performance, it should also be a valuable optimization for uffd-wp, when un-protecting. This has been previously suggested by Peter Collingbourne in [1], relevant in the context of the Scudo memory allocator, before we had PageAnonExclusive. This commit doesn't add the same handling for PMDs (i.e., anonymous THP, anonymous hugetlb); benchmark results from Andrea indicate that there are minor performance gains, so it's might still be valuable to streamline that logic for all anonymous pages in the future. As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually happening. Micro-benchmark courtesy of Andrea: === #define _GNU_SOURCE #include <sys/mman.h> #include <stdlib.h> #include <string.h> #include <stdio.h> #include <unistd.h> #define SIZE (1024*1024*1024) int main(int argc, char *argv[]) { char *p; if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE)) perror("posix_memalign"), exit(1); if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE)) perror("madvise"); explicit_bzero(p, SIZE); for (int loops = 0; loops < 40; loops++) { if (mprotect(p, SIZE, PROT_READ)) perror("mprotect"), exit(1); if (mprotect(p, SIZE, PROT_READ|PROT_WRITE)) perror("mprotect"), exit(1); explicit_bzero(p, SIZE); } } === Results on my Ryzen 9 3900X: Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043 Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026 === [1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Suggested-by: Peter Collingbourne <pcc@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 09:36:29 +00:00
}
/*
* Writable MAP_SHARED mapping: "clean" might indicate that the FS still
* needs a real write-fault for writenotify
* (see vma_wants_writenotify()). If "dirty", the assumption is that the
* FS was already notified and we can simply mark the PTE writable
* just like the write-fault handler would do.
*/
mm/mprotect: allow clean exclusive anon pages to be writable Patch series "mm/autonuma: replace savedwrite infrastructure", v2. As discussed in my talk at LPC, we can reuse the same mechanism for deciding whether to map a pte writable when upgrading permissions via mprotect() -- e.g., PROT_READ -> PROT_READ|PROT_WRITE -- to replace the savedwrite infrastructure used for NUMA hinting faults (e.g., PROT_NONE -> PROT_READ|PROT_WRITE). Instead of maintaining previous write permissions for a pte/pmd, we re-determine if the pte/pmd can be writable. The big benefit is that we have a common logic for deciding whether we can map a pte/pmd writable on protection changes. For private mappings, there should be no difference -- from what I understand, that is what autonuma benchmarks care about. I ran autonumabench for v1 on a system with 2 NUMA nodes, 96 GiB each via: perf stat --null --repeat 10 The numa01 benchmark is quite noisy in my environment and I failed to reduce the noise so far. numa01: mm-unstable: 146.88 +- 6.54 seconds time elapsed ( +- 4.45% ) mm-unstable++: 147.45 +- 13.39 seconds time elapsed ( +- 9.08% ) numa02: mm-unstable: 16.0300 +- 0.0624 seconds time elapsed ( +- 0.39% ) mm-unstable++: 16.1281 +- 0.0945 seconds time elapsed ( +- 0.59% ) It is worth noting that for shared writable mappings that require writenotify, we will only avoid write faults if the pte/pmd is dirty (inherited from the older mprotect logic). If we ever care about optimizing that further, we'd need a different mechanism to identify whether the FS still needs to get notified on the next write access. In any case, such an optimization will then not be autonuma-specific, but mprotect() permission upgrades would similarly benefit from it. This patch (of 7): Anonymous pages might have the dirty bit clear, but this should not prevent mprotect from making them writable if they are exclusive. Therefore, skip the test whether the page is dirty in this case. Note that there are already other ways to get a writable PTE mapping an anonymous page that is clean: for example, via MADV_FREE. In an ideal world, we'd have a different indication from the FS whether writenotify is still required. [david@redhat.com: return directly; update description] Link: https://lkml.kernel.org/r/20221108174652.198904-1-david@redhat.com Link: https://lkml.kernel.org/r/20221108174652.198904-2-david@redhat.com Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Dave Chinner <david@fromorbit.com> Cc: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-08 17:46:46 +00:00
return pte_dirty(pte);
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we can try mapping anonymous pages in a private writable mapping writable if they are exclusive, the PTE is already dirty, and no special handling applies. Mapping the anonymous page writable is essentially the same thing the write fault handler would do in this case. Special handling is required for uffd-wp and softdirty tracking, so take care of that properly. Also, leave PROT_NONE handling alone for now; in the future, we could similarly extend the logic in do_numa_page() or use pte_mk_savedwrite() here. While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE) performance, it should also be a valuable optimization for uffd-wp, when un-protecting. This has been previously suggested by Peter Collingbourne in [1], relevant in the context of the Scudo memory allocator, before we had PageAnonExclusive. This commit doesn't add the same handling for PMDs (i.e., anonymous THP, anonymous hugetlb); benchmark results from Andrea indicate that there are minor performance gains, so it's might still be valuable to streamline that logic for all anonymous pages in the future. As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually happening. Micro-benchmark courtesy of Andrea: === #define _GNU_SOURCE #include <sys/mman.h> #include <stdlib.h> #include <string.h> #include <stdio.h> #include <unistd.h> #define SIZE (1024*1024*1024) int main(int argc, char *argv[]) { char *p; if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE)) perror("posix_memalign"), exit(1); if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE)) perror("madvise"); explicit_bzero(p, SIZE); for (int loops = 0; loops < 40; loops++) { if (mprotect(p, SIZE, PROT_READ)) perror("mprotect"), exit(1); if (mprotect(p, SIZE, PROT_READ|PROT_WRITE)) perror("mprotect"), exit(1); explicit_bzero(p, SIZE); } } === Results on my Ryzen 9 3900X: Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043 Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026 === [1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Suggested-by: Peter Collingbourne <pcc@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 09:36:29 +00:00
}
static long change_pte_range(struct mmu_gather *tlb,
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
struct vm_area_struct *vma, pmd_t *pmd, unsigned long addr,
unsigned long end, pgprot_t newprot, unsigned long cp_flags)
{
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
pte_t *pte, oldpte;
spinlock_t *ptl;
long pages = 0;
int target_node = NUMA_NO_NODE;
mm: merge parameters for change_protection() change_protection() was used by either the NUMA or mprotect() code, there's one parameter for each of the callers (dirty_accountable and prot_numa). Further, these parameters are passed along the calls: - change_protection_range() - change_p4d_range() - change_pud_range() - change_pmd_range() - ... Now we introduce a flag for change_protect() and all these helpers to replace these parameters. Then we can avoid passing multiple parameters multiple times along the way. More importantly, it'll greatly simplify the work if we want to introduce any new parameters to change_protection(). In the follow up patches, a new parameter for userfaultfd write protection will be introduced. No functional change at all. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-7-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:05:45 +00:00
bool prot_numa = cp_flags & MM_CP_PROT_NUMA;
userfaultfd: wp: apply _PAGE_UFFD_WP bit Firstly, introduce two new flags MM_CP_UFFD_WP[_RESOLVE] for change_protection() when used with uffd-wp and make sure the two new flags are exclusively used. Then, - For MM_CP_UFFD_WP: apply the _PAGE_UFFD_WP bit and remove _PAGE_RW when a range of memory is write protected by uffd - For MM_CP_UFFD_WP_RESOLVE: remove the _PAGE_UFFD_WP bit and recover _PAGE_RW when write protection is resolved from userspace And use this new interface in mwriteprotect_range() to replace the old MM_CP_DIRTY_ACCT. Do this change for both PTEs and huge PMDs. Then we can start to identify which PTE/PMD is write protected by general (e.g., COW or soft dirty tracking), and which is for userfaultfd-wp. Since we should keep the _PAGE_UFFD_WP when doing pte_modify(), add it into _PAGE_CHG_MASK as well. Meanwhile, since we have this new bit, we can be even more strict when detecting uffd-wp page faults in either do_wp_page() or wp_huge_pmd(). After we're with _PAGE_UFFD_WP, a special case is when a page is both protected by the general COW logic and also userfault-wp. Here the userfault-wp will have higher priority and will be handled first. Only after the uffd-wp bit is cleared on the PTE/PMD will we continue to handle the general COW. These are the steps on what will happen with such a page: 1. CPU accesses write protected shared page (so both protected by general COW and uffd-wp), blocked by uffd-wp first because in do_wp_page we'll handle uffd-wp first, so it has higher priority than general COW. 2. Uffd service thread receives the request, do UFFDIO_WRITEPROTECT to remove the uffd-wp bit upon the PTE/PMD. However here we still keep the write bit cleared. Notify the blocked CPU. 3. The blocked CPU resumes the page fault process with a fault retry, during retry it'll notice it was not with the uffd-wp bit this time but it is still write protected by general COW, then it'll go though the COW path in the fault handler, copy the page, apply write bit where necessary, and retry again. 4. The CPU will be able to access this page with write bit set. Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Martin Cracauer <cracauer@cons.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-8-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:05:49 +00:00
bool uffd_wp = cp_flags & MM_CP_UFFD_WP;
bool uffd_wp_resolve = cp_flags & MM_CP_UFFD_WP_RESOLVE;
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
tlb_change_page_size(tlb, PAGE_SIZE);
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
mm/mprotect: delete pmd_none_or_clear_bad_unless_trans_huge() change_pmd_range() had special pmd_none_or_clear_bad_unless_trans_huge(), required to avoid "bad" choices when setting automatic NUMA hinting under mmap_read_lock(); but most of that is already covered in pte_offset_map() now. change_pmd_range() just wants a pmd_none() check before wasting time on MMU notifiers, then checks on the read-once _pmd value to work out what's needed for huge cases. If change_pte_range() returns -EAGAIN to retry if pte_offset_map_lock() fails, nothing more special is needed. Link: https://lkml.kernel.org/r/725a42a9-91e9-c868-925-e3a5fd40bb4f@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:30:48 +00:00
if (!pte)
return -EAGAIN;
mm: numa: recheck for transhuge pages under lock during protection changes Sasha reported the following bug using trinity kernel BUG at mm/mprotect.c:149! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 20 PID: 26219 Comm: trinity-c216 Tainted: G W 3.14.0-rc5-next-20140305-sasha-00011-ge06f5f3-dirty #105 task: ffff8800b6c80000 ti: ffff880228436000 task.ti: ffff880228436000 RIP: change_protection_range+0x3b3/0x500 Call Trace: change_protection+0x25/0x30 change_prot_numa+0x1b/0x30 task_numa_work+0x279/0x360 task_work_run+0xae/0xf0 do_notify_resume+0x8e/0xe0 retint_signal+0x4d/0x92 The VM_BUG_ON was added in -mm by the patch "mm,numa: reorganize change_pmd_range". The race existed without the patch but was just harder to hit. The problem is that a transhuge check is made without holding the PTL. It's possible at the time of the check that a parallel fault clears the pmd and inserts a new one which then triggers the VM_BUG_ON check. This patch removes the VM_BUG_ON but fixes the race by rechecking transhuge under the PTL when marking page tables for NUMA hinting and bailing if a race occurred. It is not a problem for calls to mprotect() as they hold mmap_sem for write. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Sasha Levin <sasha.levin@oracle.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:36:56 +00:00
/* Get target node for single threaded private VMAs */
if (prot_numa && !(vma->vm_flags & VM_SHARED) &&
atomic_read(&vma->vm_mm->mm_users) == 1)
target_node = numa_node_id();
mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.de Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: <stable@vger.kernel.org> [v4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02 20:31:52 +00:00
flush_tlb_batched_pending(vma->vm_mm);
arch_enter_lazy_mmu_mode();
do {
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
oldpte = ptep_get(pte);
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
if (pte_present(oldpte)) {
pte_t ptent;
/*
* Avoid trapping faults against the zero or KSM
* pages. See similar comment in change_huge_pmd.
*/
if (prot_numa) {
struct page *page;
memory tiering: skip to scan fast memory If the NUMA balancing isn't used to optimize the page placement among sockets but only among memory types, the hot pages in the fast memory node couldn't be migrated (promoted) to anywhere. So it's unnecessary to scan the pages in the fast memory node via changing their PTE/PMD mapping to be PROT_NONE. So that the page faults could be avoided too. In the test, if only the memory tiering NUMA balancing mode is enabled, the number of the NUMA balancing hint faults for the DRAM node is reduced to almost 0 with the patch. While the benchmark score doesn't change visibly. Link: https://lkml.kernel.org/r/20220221084529.1052339-4-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:46:27 +00:00
int nid;
memory tiering: hot page selection with hint page fault latency Patch series "memory tiering: hot page selection", v4. To optimize page placement in a memory tiering system with NUMA balancing, the hot pages in the slow memory nodes need to be identified. Essentially, the original NUMA balancing implementation selects the mostly recently accessed (MRU) pages to promote. But this isn't a perfect algorithm to identify the hot pages. Because the pages with quite low access frequency may be accessed eventually given the NUMA balancing page table scanning period could be quite long (e.g. 60 seconds). So in this patchset, we implement a new hot page identification algorithm based on the latency between NUMA balancing page table scanning and hint page fault. Which is a kind of mostly frequently accessed (MFU) algorithm. In NUMA balancing memory tiering mode, if there are hot pages in slow memory node and cold pages in fast memory node, we need to promote/demote hot/cold pages between the fast and cold memory nodes. A choice is to promote/demote as fast as possible. But the CPU cycles and memory bandwidth consumed by the high promoting/demoting throughput will hurt the latency of some workload because of accessing inflating and slow memory bandwidth contention. A way to resolve this issue is to restrict the max promoting/demoting throughput. It will take longer to finish the promoting/demoting. But the workload latency will be better. This is implemented in this patchset as the page promotion rate limit mechanism. The promotion hot threshold is workload and system configuration dependent. So in this patchset, a method to adjust the hot threshold automatically is implemented. The basic idea is to control the number of the candidate promotion pages to match the promotion rate limit. We used the pmbench memory accessing benchmark tested the patchset on a 2-socket server system with DRAM and PMEM installed. The test results are as follows, pmbench score promote rate (accesses/s) MB/s ------------- ------------ base 146887704.1 725.6 hot selection 165695601.2 544.0 rate limit 162814569.8 165.2 auto adjustment 170495294.0 136.9 From the results above, With hot page selection patch [1/3], the pmbench score increases about 12.8%, and promote rate (overhead) decreases about 25.0%, compared with base kernel. With rate limit patch [2/3], pmbench score decreases about 1.7%, and promote rate decreases about 69.6%, compared with hot page selection patch. With threshold auto adjustment patch [3/3], pmbench score increases about 4.7%, and promote rate decrease about 17.1%, compared with rate limit patch. Baolin helped to test the patchset with MySQL on a machine which contains 1 DRAM node (30G) and 1 PMEM node (126G). sysbench /usr/share/sysbench/oltp_read_write.lua \ ...... --tables=200 \ --table-size=1000000 \ --report-interval=10 \ --threads=16 \ --time=120 The tps can be improved about 5%. This patch (of 3): To optimize page placement in a memory tiering system with NUMA balancing, the hot pages in the slow memory node need to be identified. Essentially, the original NUMA balancing implementation selects the mostly recently accessed (MRU) pages to promote. But this isn't a perfect algorithm to identify the hot pages. Because the pages with quite low access frequency may be accessed eventually given the NUMA balancing page table scanning period could be quite long (e.g. 60 seconds). The most frequently accessed (MFU) algorithm is better. So, in this patch we implemented a better hot page selection algorithm. Which is based on NUMA balancing page table scanning and hint page fault as follows, - When the page tables of the processes are scanned to change PTE/PMD to be PROT_NONE, the current time is recorded in struct page as scan time. - When the page is accessed, hint page fault will occur. The scan time is gotten from the struct page. And The hint page fault latency is defined as hint page fault time - scan time The shorter the hint page fault latency of a page is, the higher the probability of their access frequency to be higher. So the hint page fault latency is a better estimation of the page hot/cold. It's hard to find some extra space in struct page to hold the scan time. Fortunately, we can reuse some bits used by the original NUMA balancing. NUMA balancing uses some bits in struct page to store the page accessing CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the multi-stage node selection algorithm to avoid to migrate pages shared accessed by the NUMA nodes back and forth. But for pages in the slow memory node, even if they are shared accessed by multiple NUMA nodes, as long as the pages are hot, they need to be promoted to the fast memory node. So the accessing CPU and PID information are unnecessary for the slow memory pages. We can reuse these bits in struct page to record the scan time. For the fast memory pages, these bits are used as before. For the hot threshold, the default value is 1 second, which works well in our performance test. All pages with hint page fault latency < hot threshold will be considered hot. It's hard for users to determine the hot threshold. So we don't provide a kernel ABI to set it, just provide a debugfs interface for advanced users to experiment. We will continue to work on a hot threshold automatic adjustment mechanism. The downside of the above method is that the response time to the workload hot spot changing may be much longer. For example, - A previous cold memory area becomes hot - The hint page fault will be triggered. But the hint page fault latency isn't shorter than the hot threshold. So the pages will not be promoted. - When the memory area is scanned again, maybe after a scan period, the hint page fault latency measured will be shorter than the hot threshold and the pages will be promoted. To mitigate this, if there are enough free space in the fast memory node, the hot threshold will not be used, all pages will be promoted upon the hint page fault for fast response. Thanks Zhong Jiang reported and tested the fix for a bug when disabling memory tiering mode dynamically. Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: osalvador <osalvador@suse.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13 08:39:51 +00:00
bool toptier;
/* Avoid TLB flush if possible */
if (pte_protnone(oldpte))
continue;
page = vm_normal_page(vma, addr, oldpte);
if (!page || is_zone_device_page(page) || PageKsm(page))
continue;
mm: numa: do not trap faults on shared data section pages. Workloads consisting of a large number of processes running the same program with a very large shared data segment may experience performance problems when numa balancing attempts to migrate the shared cow pages. This manifests itself with many processes or tasks in TASK_UNINTERRUPTIBLE state waiting for the shared pages to be migrated. The program listed below simulates the conditions with these results when run with 288 processes on a 144 core/8 socket machine. Average throughput Average throughput Average throughput with numa_balancing=0 with numa_balancing=1 with numa_balancing=1 without the patch with the patch --------------------- --------------------- --------------------- 2118782 2021534 2107979 Complex production environments show less variability and fewer poorly performing outliers accompanied with a smaller number of processes waiting on NUMA page migration with this patch applied. In some cases, %iowait drops from 16%-26% to 0. // SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2017 Oracle and/or its affiliates. All rights reserved. */ #include <sys/time.h> #include <stdio.h> #include <wait.h> #include <sys/mman.h> int a[1000000] = {13}; int main(int argc, const char **argv) { int n = 0; int i; pid_t pid; int stat; int *count_array; int cpu_count = 288; long total = 0; struct timeval t1, t2 = {(argc > 1 ? atoi(argv[1]) : 10), 0}; if (argc > 2) cpu_count = atoi(argv[2]); count_array = mmap(NULL, cpu_count * sizeof(int), (PROT_READ|PROT_WRITE), (MAP_SHARED|MAP_ANONYMOUS), 0, 0); if (count_array == MAP_FAILED) { perror("mmap:"); return 0; } for (i = 0; i < cpu_count; ++i) { pid = fork(); if (pid <= 0) break; if ((i & 0xf) == 0) usleep(2); } if (pid != 0) { if (i == 0) { perror("fork:"); return 0; } for (;;) { pid = wait(&stat); if (pid < 0) break; } for (i = 0; i < cpu_count; ++i) total += count_array[i]; printf("Total %ld\n", total); munmap(count_array, cpu_count * sizeof(int)); return 0; } gettimeofday(&t1, 0); timeradd(&t1, &t2, &t1); while (timercmp(&t2, &t1, <)) { int b = 0; int j; for (j = 0; j < 1000000; j++) b += a[j]; gettimeofday(&t2, 0); n++; } count_array[i] = n; return 0; } This patch changes change_pte_range() to skip shared copy-on-write pages when called from change_prot_numa(). NOTE: change_prot_numa() is nominally called from task_numa_work() and queue_pages_test_walk(). task_numa_work() is the auto NUMA balancing path, and queue_pages_test_walk() is part of explicit NUMA policy management. However, queue_pages_test_walk() only calls change_prot_numa() when MPOL_MF_LAZY is specified and currently that is not allowed, so change_prot_numa() is only called from auto NUMA balancing. In the case of explicit NUMA policy management, shared pages are not migrated unless MPOL_MF_MOVE_ALL is specified, and MPOL_MF_MOVE_ALL depends on CAP_SYS_NICE. Currently, there is no way to pass information about MPOL_MF_MOVE_ALL to change_pte_range. This will have to be fixed if MPOL_MF_LAZY is enabled and MPOL_MF_MOVE_ALL is to be honored in lazy migration mode. task_numa_work() skips the read-only VMAs of programs and shared libraries. Link: http://lkml.kernel.org/r/1516751617-7369-1-git-send-email-henry.willard@oracle.com Signed-off-by: Henry Willard <henry.willard@oracle.com> Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Steve Sistare <steven.sistare@oracle.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 00:21:07 +00:00
/* Also skip shared copy-on-write pages */
if (is_cow_mapping(vma->vm_flags) &&
mm: don't try to NUMA-migrate COW pages that have other uses Oded Gabbay reports that enabling NUMA balancing causes corruption with his Gaudi accelerator test load: "All the details are in the bug, but the bottom line is that somehow, this patch causes corruption when the numa balancing feature is enabled AND we don't use process affinity AND we use GUP to pin pages so our accelerator can DMA to/from system memory. Either disabling numa balancing, using process affinity to bind to specific numa-node or reverting this patch causes the bug to disappear" and Oded bisected the issue to commit 09854ba94c6a ("mm: do_wp_page() simplification"). Now, the NUMA balancing shouldn't actually be changing the writability of a page, and as such shouldn't matter for COW. But it appears it does. Suspicious. However, regardless of that, the condition for enabling NUMA faults in change_pte_range() is nonsensical. It uses "page_mapcount(page)" to decide if a COW page should be NUMA-protected or not, and that makes absolutely no sense. The number of mappings a page has is irrelevant: not only does GUP get a reference to a page as in Oded's case, but the other mappings migth be paged out and the only reference to them would be in the page count. Since we should never try to NUMA-balance a page that we can't move anyway due to other references, just fix the code to use 'page_count()'. Oded confirms that that fixes his issue. Now, this does imply that something in NUMA balancing ends up changing page protections (other than the obvious one of making the page inaccessible to get the NUMA faulting information). Otherwise the COW simplification wouldn't matter - since doing the GUP on the page would make sure it's writable. The cause of that permission change would be good to figure out too, since it clearly results in spurious COW events - but fixing the nonsensical test that just happened to work before is obviously the CorrectThing(tm) to do regardless. Fixes: 09854ba94c6a ("mm: do_wp_page() simplification") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215616 Link: https://lore.kernel.org/all/CAFCwf10eNmwq2wD71xjUhqkvv5+_pJMR1nPug2RqNDcFT4H86Q@mail.gmail.com/ Reported-and-tested-by: Oded Gabbay <oded.gabbay@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-02-17 16:57:47 +00:00
page_count(page) != 1)
mm: numa: do not trap faults on shared data section pages. Workloads consisting of a large number of processes running the same program with a very large shared data segment may experience performance problems when numa balancing attempts to migrate the shared cow pages. This manifests itself with many processes or tasks in TASK_UNINTERRUPTIBLE state waiting for the shared pages to be migrated. The program listed below simulates the conditions with these results when run with 288 processes on a 144 core/8 socket machine. Average throughput Average throughput Average throughput with numa_balancing=0 with numa_balancing=1 with numa_balancing=1 without the patch with the patch --------------------- --------------------- --------------------- 2118782 2021534 2107979 Complex production environments show less variability and fewer poorly performing outliers accompanied with a smaller number of processes waiting on NUMA page migration with this patch applied. In some cases, %iowait drops from 16%-26% to 0. // SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2017 Oracle and/or its affiliates. All rights reserved. */ #include <sys/time.h> #include <stdio.h> #include <wait.h> #include <sys/mman.h> int a[1000000] = {13}; int main(int argc, const char **argv) { int n = 0; int i; pid_t pid; int stat; int *count_array; int cpu_count = 288; long total = 0; struct timeval t1, t2 = {(argc > 1 ? atoi(argv[1]) : 10), 0}; if (argc > 2) cpu_count = atoi(argv[2]); count_array = mmap(NULL, cpu_count * sizeof(int), (PROT_READ|PROT_WRITE), (MAP_SHARED|MAP_ANONYMOUS), 0, 0); if (count_array == MAP_FAILED) { perror("mmap:"); return 0; } for (i = 0; i < cpu_count; ++i) { pid = fork(); if (pid <= 0) break; if ((i & 0xf) == 0) usleep(2); } if (pid != 0) { if (i == 0) { perror("fork:"); return 0; } for (;;) { pid = wait(&stat); if (pid < 0) break; } for (i = 0; i < cpu_count; ++i) total += count_array[i]; printf("Total %ld\n", total); munmap(count_array, cpu_count * sizeof(int)); return 0; } gettimeofday(&t1, 0); timeradd(&t1, &t2, &t1); while (timercmp(&t2, &t1, <)) { int b = 0; int j; for (j = 0; j < 1000000; j++) b += a[j]; gettimeofday(&t2, 0); n++; } count_array[i] = n; return 0; } This patch changes change_pte_range() to skip shared copy-on-write pages when called from change_prot_numa(). NOTE: change_prot_numa() is nominally called from task_numa_work() and queue_pages_test_walk(). task_numa_work() is the auto NUMA balancing path, and queue_pages_test_walk() is part of explicit NUMA policy management. However, queue_pages_test_walk() only calls change_prot_numa() when MPOL_MF_LAZY is specified and currently that is not allowed, so change_prot_numa() is only called from auto NUMA balancing. In the case of explicit NUMA policy management, shared pages are not migrated unless MPOL_MF_MOVE_ALL is specified, and MPOL_MF_MOVE_ALL depends on CAP_SYS_NICE. Currently, there is no way to pass information about MPOL_MF_MOVE_ALL to change_pte_range. This will have to be fixed if MPOL_MF_LAZY is enabled and MPOL_MF_MOVE_ALL is to be honored in lazy migration mode. task_numa_work() skips the read-only VMAs of programs and shared libraries. Link: http://lkml.kernel.org/r/1516751617-7369-1-git-send-email-henry.willard@oracle.com Signed-off-by: Henry Willard <henry.willard@oracle.com> Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Steve Sistare <steven.sistare@oracle.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 00:21:07 +00:00
continue;
sched/numa: avoid trapping faults and attempting migration of file-backed dirty pages change_pte_range is called from task work context to mark PTEs for receiving NUMA faulting hints. If the marked pages are dirty then migration may fail. Some filesystems cannot migrate dirty pages without blocking so are skipped in MIGRATE_ASYNC mode which just wastes CPU. Even when they can, it can be a waste of cycles when the pages are shared forcing higher scan rates. This patch avoids marking shared dirty pages for hinting faults but also will skip a migration if the page was dirtied after the scanner updated a clean page. This is most noticeable running the NASA Parallel Benchmark when backed by btrfs, the default root filesystem for some distributions, but also noticeable when using XFS. The following are results from a 4-socket machine running a 4.16-rc4 kernel with some scheduler patches that are pending for the next merge window. 4.16.0-rc4 4.16.0-rc4 schedtip-20180309 nodirty-v1 Time cg.D 459.07 ( 0.00%) 444.21 ( 3.24%) Time ep.D 76.96 ( 0.00%) 77.69 ( -0.95%) Time is.D 25.55 ( 0.00%) 27.85 ( -9.00%) Time lu.D 601.58 ( 0.00%) 596.87 ( 0.78%) Time mg.D 107.73 ( 0.00%) 108.22 ( -0.45%) is.D regresses slightly in terms of absolute time but note that that particular load varies quite a bit from run to run. The more relevant observation is the total system CPU usage. 4.16.0-rc4 4.16.0-rc4 schedtip-20180309 nodirty-v1 User 71471.91 70627.04 System 11078.96 8256.13 Elapsed 661.66 632.74 That is a substantial drop in system CPU usage and overall the workload completes faster. The NUMA balancing statistics are also interesting NUMA base PTE updates 111407972 139848884 NUMA huge PMD updates 206506 264869 NUMA page range updates 217139044 275461812 NUMA hint faults 4300924 3719784 NUMA hint local faults 3012539 3416618 NUMA hint local percent 70 91 NUMA pages migrated 1517487 1358420 While more PTEs are scanned due to changes in what faults are gathered, it's clear that a far higher percentage of faults are local as the bulk of the remote hits were dirty pages that, in this case with btrfs, had no chance of migrating. The following is a comparison when using XFS as that is a more realistic filesystem choice for a data partition 4.16.0-rc4 4.16.0-rc4 schedtip-20180309 nodirty-v1r47 Time cg.D 485.28 ( 0.00%) 442.62 ( 8.79%) Time ep.D 77.68 ( 0.00%) 77.54 ( 0.18%) Time is.D 26.44 ( 0.00%) 24.79 ( 6.24%) Time lu.D 597.46 ( 0.00%) 597.11 ( 0.06%) Time mg.D 142.65 ( 0.00%) 105.83 ( 25.81%) That is a reasonable gain on two relatively long-lived workloads. While not presented, there is also a substantial drop in system CPu usage and the NUMA balancing stats show similar improvements in locality as btrfs did. Link: http://lkml.kernel.org/r/20180326094334.zserdec62gwmmfqf@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:20 +00:00
/*
* While migration can move some dirty pages,
* it cannot move them all from MIGRATE_ASYNC
* context.
*/
if (page_is_file_lru(page) && PageDirty(page))
sched/numa: avoid trapping faults and attempting migration of file-backed dirty pages change_pte_range is called from task work context to mark PTEs for receiving NUMA faulting hints. If the marked pages are dirty then migration may fail. Some filesystems cannot migrate dirty pages without blocking so are skipped in MIGRATE_ASYNC mode which just wastes CPU. Even when they can, it can be a waste of cycles when the pages are shared forcing higher scan rates. This patch avoids marking shared dirty pages for hinting faults but also will skip a migration if the page was dirtied after the scanner updated a clean page. This is most noticeable running the NASA Parallel Benchmark when backed by btrfs, the default root filesystem for some distributions, but also noticeable when using XFS. The following are results from a 4-socket machine running a 4.16-rc4 kernel with some scheduler patches that are pending for the next merge window. 4.16.0-rc4 4.16.0-rc4 schedtip-20180309 nodirty-v1 Time cg.D 459.07 ( 0.00%) 444.21 ( 3.24%) Time ep.D 76.96 ( 0.00%) 77.69 ( -0.95%) Time is.D 25.55 ( 0.00%) 27.85 ( -9.00%) Time lu.D 601.58 ( 0.00%) 596.87 ( 0.78%) Time mg.D 107.73 ( 0.00%) 108.22 ( -0.45%) is.D regresses slightly in terms of absolute time but note that that particular load varies quite a bit from run to run. The more relevant observation is the total system CPU usage. 4.16.0-rc4 4.16.0-rc4 schedtip-20180309 nodirty-v1 User 71471.91 70627.04 System 11078.96 8256.13 Elapsed 661.66 632.74 That is a substantial drop in system CPU usage and overall the workload completes faster. The NUMA balancing statistics are also interesting NUMA base PTE updates 111407972 139848884 NUMA huge PMD updates 206506 264869 NUMA page range updates 217139044 275461812 NUMA hint faults 4300924 3719784 NUMA hint local faults 3012539 3416618 NUMA hint local percent 70 91 NUMA pages migrated 1517487 1358420 While more PTEs are scanned due to changes in what faults are gathered, it's clear that a far higher percentage of faults are local as the bulk of the remote hits were dirty pages that, in this case with btrfs, had no chance of migrating. The following is a comparison when using XFS as that is a more realistic filesystem choice for a data partition 4.16.0-rc4 4.16.0-rc4 schedtip-20180309 nodirty-v1r47 Time cg.D 485.28 ( 0.00%) 442.62 ( 8.79%) Time ep.D 77.68 ( 0.00%) 77.54 ( 0.18%) Time is.D 26.44 ( 0.00%) 24.79 ( 6.24%) Time lu.D 597.46 ( 0.00%) 597.11 ( 0.06%) Time mg.D 142.65 ( 0.00%) 105.83 ( 25.81%) That is a reasonable gain on two relatively long-lived workloads. While not presented, there is also a substantial drop in system CPu usage and the NUMA balancing stats show similar improvements in locality as btrfs did. Link: http://lkml.kernel.org/r/20180326094334.zserdec62gwmmfqf@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:20 +00:00
continue;
/*
* Don't mess with PTEs if page is already on the node
* a single-threaded process is running on.
*/
memory tiering: skip to scan fast memory If the NUMA balancing isn't used to optimize the page placement among sockets but only among memory types, the hot pages in the fast memory node couldn't be migrated (promoted) to anywhere. So it's unnecessary to scan the pages in the fast memory node via changing their PTE/PMD mapping to be PROT_NONE. So that the page faults could be avoided too. In the test, if only the memory tiering NUMA balancing mode is enabled, the number of the NUMA balancing hint faults for the DRAM node is reduced to almost 0 with the patch. While the benchmark score doesn't change visibly. Link: https://lkml.kernel.org/r/20220221084529.1052339-4-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:46:27 +00:00
nid = page_to_nid(page);
if (target_node == nid)
continue;
memory tiering: hot page selection with hint page fault latency Patch series "memory tiering: hot page selection", v4. To optimize page placement in a memory tiering system with NUMA balancing, the hot pages in the slow memory nodes need to be identified. Essentially, the original NUMA balancing implementation selects the mostly recently accessed (MRU) pages to promote. But this isn't a perfect algorithm to identify the hot pages. Because the pages with quite low access frequency may be accessed eventually given the NUMA balancing page table scanning period could be quite long (e.g. 60 seconds). So in this patchset, we implement a new hot page identification algorithm based on the latency between NUMA balancing page table scanning and hint page fault. Which is a kind of mostly frequently accessed (MFU) algorithm. In NUMA balancing memory tiering mode, if there are hot pages in slow memory node and cold pages in fast memory node, we need to promote/demote hot/cold pages between the fast and cold memory nodes. A choice is to promote/demote as fast as possible. But the CPU cycles and memory bandwidth consumed by the high promoting/demoting throughput will hurt the latency of some workload because of accessing inflating and slow memory bandwidth contention. A way to resolve this issue is to restrict the max promoting/demoting throughput. It will take longer to finish the promoting/demoting. But the workload latency will be better. This is implemented in this patchset as the page promotion rate limit mechanism. The promotion hot threshold is workload and system configuration dependent. So in this patchset, a method to adjust the hot threshold automatically is implemented. The basic idea is to control the number of the candidate promotion pages to match the promotion rate limit. We used the pmbench memory accessing benchmark tested the patchset on a 2-socket server system with DRAM and PMEM installed. The test results are as follows, pmbench score promote rate (accesses/s) MB/s ------------- ------------ base 146887704.1 725.6 hot selection 165695601.2 544.0 rate limit 162814569.8 165.2 auto adjustment 170495294.0 136.9 From the results above, With hot page selection patch [1/3], the pmbench score increases about 12.8%, and promote rate (overhead) decreases about 25.0%, compared with base kernel. With rate limit patch [2/3], pmbench score decreases about 1.7%, and promote rate decreases about 69.6%, compared with hot page selection patch. With threshold auto adjustment patch [3/3], pmbench score increases about 4.7%, and promote rate decrease about 17.1%, compared with rate limit patch. Baolin helped to test the patchset with MySQL on a machine which contains 1 DRAM node (30G) and 1 PMEM node (126G). sysbench /usr/share/sysbench/oltp_read_write.lua \ ...... --tables=200 \ --table-size=1000000 \ --report-interval=10 \ --threads=16 \ --time=120 The tps can be improved about 5%. This patch (of 3): To optimize page placement in a memory tiering system with NUMA balancing, the hot pages in the slow memory node need to be identified. Essentially, the original NUMA balancing implementation selects the mostly recently accessed (MRU) pages to promote. But this isn't a perfect algorithm to identify the hot pages. Because the pages with quite low access frequency may be accessed eventually given the NUMA balancing page table scanning period could be quite long (e.g. 60 seconds). The most frequently accessed (MFU) algorithm is better. So, in this patch we implemented a better hot page selection algorithm. Which is based on NUMA balancing page table scanning and hint page fault as follows, - When the page tables of the processes are scanned to change PTE/PMD to be PROT_NONE, the current time is recorded in struct page as scan time. - When the page is accessed, hint page fault will occur. The scan time is gotten from the struct page. And The hint page fault latency is defined as hint page fault time - scan time The shorter the hint page fault latency of a page is, the higher the probability of their access frequency to be higher. So the hint page fault latency is a better estimation of the page hot/cold. It's hard to find some extra space in struct page to hold the scan time. Fortunately, we can reuse some bits used by the original NUMA balancing. NUMA balancing uses some bits in struct page to store the page accessing CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the multi-stage node selection algorithm to avoid to migrate pages shared accessed by the NUMA nodes back and forth. But for pages in the slow memory node, even if they are shared accessed by multiple NUMA nodes, as long as the pages are hot, they need to be promoted to the fast memory node. So the accessing CPU and PID information are unnecessary for the slow memory pages. We can reuse these bits in struct page to record the scan time. For the fast memory pages, these bits are used as before. For the hot threshold, the default value is 1 second, which works well in our performance test. All pages with hint page fault latency < hot threshold will be considered hot. It's hard for users to determine the hot threshold. So we don't provide a kernel ABI to set it, just provide a debugfs interface for advanced users to experiment. We will continue to work on a hot threshold automatic adjustment mechanism. The downside of the above method is that the response time to the workload hot spot changing may be much longer. For example, - A previous cold memory area becomes hot - The hint page fault will be triggered. But the hint page fault latency isn't shorter than the hot threshold. So the pages will not be promoted. - When the memory area is scanned again, maybe after a scan period, the hint page fault latency measured will be shorter than the hot threshold and the pages will be promoted. To mitigate this, if there are enough free space in the fast memory node, the hot threshold will not be used, all pages will be promoted upon the hint page fault for fast response. Thanks Zhong Jiang reported and tested the fix for a bug when disabling memory tiering mode dynamically. Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: osalvador <osalvador@suse.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13 08:39:51 +00:00
toptier = node_is_toptier(nid);
memory tiering: skip to scan fast memory If the NUMA balancing isn't used to optimize the page placement among sockets but only among memory types, the hot pages in the fast memory node couldn't be migrated (promoted) to anywhere. So it's unnecessary to scan the pages in the fast memory node via changing their PTE/PMD mapping to be PROT_NONE. So that the page faults could be avoided too. In the test, if only the memory tiering NUMA balancing mode is enabled, the number of the NUMA balancing hint faults for the DRAM node is reduced to almost 0 with the patch. While the benchmark score doesn't change visibly. Link: https://lkml.kernel.org/r/20220221084529.1052339-4-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:46:27 +00:00
/*
* Skip scanning top tier node if normal numa
* balancing is disabled
*/
if (!(sysctl_numa_balancing_mode & NUMA_BALANCING_NORMAL) &&
memory tiering: hot page selection with hint page fault latency Patch series "memory tiering: hot page selection", v4. To optimize page placement in a memory tiering system with NUMA balancing, the hot pages in the slow memory nodes need to be identified. Essentially, the original NUMA balancing implementation selects the mostly recently accessed (MRU) pages to promote. But this isn't a perfect algorithm to identify the hot pages. Because the pages with quite low access frequency may be accessed eventually given the NUMA balancing page table scanning period could be quite long (e.g. 60 seconds). So in this patchset, we implement a new hot page identification algorithm based on the latency between NUMA balancing page table scanning and hint page fault. Which is a kind of mostly frequently accessed (MFU) algorithm. In NUMA balancing memory tiering mode, if there are hot pages in slow memory node and cold pages in fast memory node, we need to promote/demote hot/cold pages between the fast and cold memory nodes. A choice is to promote/demote as fast as possible. But the CPU cycles and memory bandwidth consumed by the high promoting/demoting throughput will hurt the latency of some workload because of accessing inflating and slow memory bandwidth contention. A way to resolve this issue is to restrict the max promoting/demoting throughput. It will take longer to finish the promoting/demoting. But the workload latency will be better. This is implemented in this patchset as the page promotion rate limit mechanism. The promotion hot threshold is workload and system configuration dependent. So in this patchset, a method to adjust the hot threshold automatically is implemented. The basic idea is to control the number of the candidate promotion pages to match the promotion rate limit. We used the pmbench memory accessing benchmark tested the patchset on a 2-socket server system with DRAM and PMEM installed. The test results are as follows, pmbench score promote rate (accesses/s) MB/s ------------- ------------ base 146887704.1 725.6 hot selection 165695601.2 544.0 rate limit 162814569.8 165.2 auto adjustment 170495294.0 136.9 From the results above, With hot page selection patch [1/3], the pmbench score increases about 12.8%, and promote rate (overhead) decreases about 25.0%, compared with base kernel. With rate limit patch [2/3], pmbench score decreases about 1.7%, and promote rate decreases about 69.6%, compared with hot page selection patch. With threshold auto adjustment patch [3/3], pmbench score increases about 4.7%, and promote rate decrease about 17.1%, compared with rate limit patch. Baolin helped to test the patchset with MySQL on a machine which contains 1 DRAM node (30G) and 1 PMEM node (126G). sysbench /usr/share/sysbench/oltp_read_write.lua \ ...... --tables=200 \ --table-size=1000000 \ --report-interval=10 \ --threads=16 \ --time=120 The tps can be improved about 5%. This patch (of 3): To optimize page placement in a memory tiering system with NUMA balancing, the hot pages in the slow memory node need to be identified. Essentially, the original NUMA balancing implementation selects the mostly recently accessed (MRU) pages to promote. But this isn't a perfect algorithm to identify the hot pages. Because the pages with quite low access frequency may be accessed eventually given the NUMA balancing page table scanning period could be quite long (e.g. 60 seconds). The most frequently accessed (MFU) algorithm is better. So, in this patch we implemented a better hot page selection algorithm. Which is based on NUMA balancing page table scanning and hint page fault as follows, - When the page tables of the processes are scanned to change PTE/PMD to be PROT_NONE, the current time is recorded in struct page as scan time. - When the page is accessed, hint page fault will occur. The scan time is gotten from the struct page. And The hint page fault latency is defined as hint page fault time - scan time The shorter the hint page fault latency of a page is, the higher the probability of their access frequency to be higher. So the hint page fault latency is a better estimation of the page hot/cold. It's hard to find some extra space in struct page to hold the scan time. Fortunately, we can reuse some bits used by the original NUMA balancing. NUMA balancing uses some bits in struct page to store the page accessing CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the multi-stage node selection algorithm to avoid to migrate pages shared accessed by the NUMA nodes back and forth. But for pages in the slow memory node, even if they are shared accessed by multiple NUMA nodes, as long as the pages are hot, they need to be promoted to the fast memory node. So the accessing CPU and PID information are unnecessary for the slow memory pages. We can reuse these bits in struct page to record the scan time. For the fast memory pages, these bits are used as before. For the hot threshold, the default value is 1 second, which works well in our performance test. All pages with hint page fault latency < hot threshold will be considered hot. It's hard for users to determine the hot threshold. So we don't provide a kernel ABI to set it, just provide a debugfs interface for advanced users to experiment. We will continue to work on a hot threshold automatic adjustment mechanism. The downside of the above method is that the response time to the workload hot spot changing may be much longer. For example, - A previous cold memory area becomes hot - The hint page fault will be triggered. But the hint page fault latency isn't shorter than the hot threshold. So the pages will not be promoted. - When the memory area is scanned again, maybe after a scan period, the hint page fault latency measured will be shorter than the hot threshold and the pages will be promoted. To mitigate this, if there are enough free space in the fast memory node, the hot threshold will not be used, all pages will be promoted upon the hint page fault for fast response. Thanks Zhong Jiang reported and tested the fix for a bug when disabling memory tiering mode dynamically. Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: osalvador <osalvador@suse.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13 08:39:51 +00:00
toptier)
continue;
memory tiering: hot page selection with hint page fault latency Patch series "memory tiering: hot page selection", v4. To optimize page placement in a memory tiering system with NUMA balancing, the hot pages in the slow memory nodes need to be identified. Essentially, the original NUMA balancing implementation selects the mostly recently accessed (MRU) pages to promote. But this isn't a perfect algorithm to identify the hot pages. Because the pages with quite low access frequency may be accessed eventually given the NUMA balancing page table scanning period could be quite long (e.g. 60 seconds). So in this patchset, we implement a new hot page identification algorithm based on the latency between NUMA balancing page table scanning and hint page fault. Which is a kind of mostly frequently accessed (MFU) algorithm. In NUMA balancing memory tiering mode, if there are hot pages in slow memory node and cold pages in fast memory node, we need to promote/demote hot/cold pages between the fast and cold memory nodes. A choice is to promote/demote as fast as possible. But the CPU cycles and memory bandwidth consumed by the high promoting/demoting throughput will hurt the latency of some workload because of accessing inflating and slow memory bandwidth contention. A way to resolve this issue is to restrict the max promoting/demoting throughput. It will take longer to finish the promoting/demoting. But the workload latency will be better. This is implemented in this patchset as the page promotion rate limit mechanism. The promotion hot threshold is workload and system configuration dependent. So in this patchset, a method to adjust the hot threshold automatically is implemented. The basic idea is to control the number of the candidate promotion pages to match the promotion rate limit. We used the pmbench memory accessing benchmark tested the patchset on a 2-socket server system with DRAM and PMEM installed. The test results are as follows, pmbench score promote rate (accesses/s) MB/s ------------- ------------ base 146887704.1 725.6 hot selection 165695601.2 544.0 rate limit 162814569.8 165.2 auto adjustment 170495294.0 136.9 From the results above, With hot page selection patch [1/3], the pmbench score increases about 12.8%, and promote rate (overhead) decreases about 25.0%, compared with base kernel. With rate limit patch [2/3], pmbench score decreases about 1.7%, and promote rate decreases about 69.6%, compared with hot page selection patch. With threshold auto adjustment patch [3/3], pmbench score increases about 4.7%, and promote rate decrease about 17.1%, compared with rate limit patch. Baolin helped to test the patchset with MySQL on a machine which contains 1 DRAM node (30G) and 1 PMEM node (126G). sysbench /usr/share/sysbench/oltp_read_write.lua \ ...... --tables=200 \ --table-size=1000000 \ --report-interval=10 \ --threads=16 \ --time=120 The tps can be improved about 5%. This patch (of 3): To optimize page placement in a memory tiering system with NUMA balancing, the hot pages in the slow memory node need to be identified. Essentially, the original NUMA balancing implementation selects the mostly recently accessed (MRU) pages to promote. But this isn't a perfect algorithm to identify the hot pages. Because the pages with quite low access frequency may be accessed eventually given the NUMA balancing page table scanning period could be quite long (e.g. 60 seconds). The most frequently accessed (MFU) algorithm is better. So, in this patch we implemented a better hot page selection algorithm. Which is based on NUMA balancing page table scanning and hint page fault as follows, - When the page tables of the processes are scanned to change PTE/PMD to be PROT_NONE, the current time is recorded in struct page as scan time. - When the page is accessed, hint page fault will occur. The scan time is gotten from the struct page. And The hint page fault latency is defined as hint page fault time - scan time The shorter the hint page fault latency of a page is, the higher the probability of their access frequency to be higher. So the hint page fault latency is a better estimation of the page hot/cold. It's hard to find some extra space in struct page to hold the scan time. Fortunately, we can reuse some bits used by the original NUMA balancing. NUMA balancing uses some bits in struct page to store the page accessing CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the multi-stage node selection algorithm to avoid to migrate pages shared accessed by the NUMA nodes back and forth. But for pages in the slow memory node, even if they are shared accessed by multiple NUMA nodes, as long as the pages are hot, they need to be promoted to the fast memory node. So the accessing CPU and PID information are unnecessary for the slow memory pages. We can reuse these bits in struct page to record the scan time. For the fast memory pages, these bits are used as before. For the hot threshold, the default value is 1 second, which works well in our performance test. All pages with hint page fault latency < hot threshold will be considered hot. It's hard for users to determine the hot threshold. So we don't provide a kernel ABI to set it, just provide a debugfs interface for advanced users to experiment. We will continue to work on a hot threshold automatic adjustment mechanism. The downside of the above method is that the response time to the workload hot spot changing may be much longer. For example, - A previous cold memory area becomes hot - The hint page fault will be triggered. But the hint page fault latency isn't shorter than the hot threshold. So the pages will not be promoted. - When the memory area is scanned again, maybe after a scan period, the hint page fault latency measured will be shorter than the hot threshold and the pages will be promoted. To mitigate this, if there are enough free space in the fast memory node, the hot threshold will not be used, all pages will be promoted upon the hint page fault for fast response. Thanks Zhong Jiang reported and tested the fix for a bug when disabling memory tiering mode dynamically. Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: osalvador <osalvador@suse.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13 08:39:51 +00:00
if (sysctl_numa_balancing_mode & NUMA_BALANCING_MEMORY_TIERING &&
!toptier)
xchg_page_access_time(page,
jiffies_to_msecs(jiffies));
}
oldpte = ptep_modify_prot_start(vma, addr, pte);
ptent = pte_modify(oldpte, newprot);
mm/uffd: always wr-protect pte in pte|pmd_mkuffd_wp() This patch is a cleanup to always wr-protect pte/pmd in mkuffd_wp paths. The reasons I still think this patch is worthwhile, are: (1) It is a cleanup already; diffstat tells. (2) It just feels natural after I thought about this, if the pte is uffd protected, let's remove the write bit no matter what it was. (2) Since x86 is the only arch that supports uffd-wp, it also redefines pte|pmd_mkuffd_wp() in that it should always contain removals of write bits. It means any future arch that want to implement uffd-wp should naturally follow this rule too. It's good to make it a default, even if with vm_page_prot changes on VM_UFFD_WP. (3) It covers more than vm_page_prot. So no chance of any potential future "accident" (like pte_mkdirty() sparc64 or loongarch, even though it just got its pte_mkdirty fixed <1 month ago). It'll be fairly clear when reading the code too that we don't worry anything before a pte_mkuffd_wp() on uncertainty of the write bit. We may call pte_wrprotect() one more time in some paths (e.g. thp split), but that should be fully local bitop instruction so the overhead should be negligible. Although this patch should logically also fix all the known issues on uffd-wp too recently on page migration (not for numa hint recovery - that may need another explcit pte_wrprotect), but this is not the plan for that fix. So no fixes, and stable doesn't need this. Link: https://lkml.kernel.org/r/20221214201533.1774616-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ives van Hoorne <ives@codesandbox.io> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 20:15:33 +00:00
if (uffd_wp)
userfaultfd: wp: apply _PAGE_UFFD_WP bit Firstly, introduce two new flags MM_CP_UFFD_WP[_RESOLVE] for change_protection() when used with uffd-wp and make sure the two new flags are exclusively used. Then, - For MM_CP_UFFD_WP: apply the _PAGE_UFFD_WP bit and remove _PAGE_RW when a range of memory is write protected by uffd - For MM_CP_UFFD_WP_RESOLVE: remove the _PAGE_UFFD_WP bit and recover _PAGE_RW when write protection is resolved from userspace And use this new interface in mwriteprotect_range() to replace the old MM_CP_DIRTY_ACCT. Do this change for both PTEs and huge PMDs. Then we can start to identify which PTE/PMD is write protected by general (e.g., COW or soft dirty tracking), and which is for userfaultfd-wp. Since we should keep the _PAGE_UFFD_WP when doing pte_modify(), add it into _PAGE_CHG_MASK as well. Meanwhile, since we have this new bit, we can be even more strict when detecting uffd-wp page faults in either do_wp_page() or wp_huge_pmd(). After we're with _PAGE_UFFD_WP, a special case is when a page is both protected by the general COW logic and also userfault-wp. Here the userfault-wp will have higher priority and will be handled first. Only after the uffd-wp bit is cleared on the PTE/PMD will we continue to handle the general COW. These are the steps on what will happen with such a page: 1. CPU accesses write protected shared page (so both protected by general COW and uffd-wp), blocked by uffd-wp first because in do_wp_page we'll handle uffd-wp first, so it has higher priority than general COW. 2. Uffd service thread receives the request, do UFFDIO_WRITEPROTECT to remove the uffd-wp bit upon the PTE/PMD. However here we still keep the write bit cleared. Notify the blocked CPU. 3. The blocked CPU resumes the page fault process with a fault retry, during retry it'll notice it was not with the uffd-wp bit this time but it is still write protected by general COW, then it'll go though the COW path in the fault handler, copy the page, apply write bit where necessary, and retry again. 4. The CPU will be able to access this page with write bit set. Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Martin Cracauer <cracauer@cons.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-8-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:05:49 +00:00
ptent = pte_mkuffd_wp(ptent);
mm/uffd: always wr-protect pte in pte|pmd_mkuffd_wp() This patch is a cleanup to always wr-protect pte/pmd in mkuffd_wp paths. The reasons I still think this patch is worthwhile, are: (1) It is a cleanup already; diffstat tells. (2) It just feels natural after I thought about this, if the pte is uffd protected, let's remove the write bit no matter what it was. (2) Since x86 is the only arch that supports uffd-wp, it also redefines pte|pmd_mkuffd_wp() in that it should always contain removals of write bits. It means any future arch that want to implement uffd-wp should naturally follow this rule too. It's good to make it a default, even if with vm_page_prot changes on VM_UFFD_WP. (3) It covers more than vm_page_prot. So no chance of any potential future "accident" (like pte_mkdirty() sparc64 or loongarch, even though it just got its pte_mkdirty fixed <1 month ago). It'll be fairly clear when reading the code too that we don't worry anything before a pte_mkuffd_wp() on uncertainty of the write bit. We may call pte_wrprotect() one more time in some paths (e.g. thp split), but that should be fully local bitop instruction so the overhead should be negligible. Although this patch should logically also fix all the known issues on uffd-wp too recently on page migration (not for numa hint recovery - that may need another explcit pte_wrprotect), but this is not the plan for that fix. So no fixes, and stable doesn't need this. Link: https://lkml.kernel.org/r/20221214201533.1774616-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ives van Hoorne <ives@codesandbox.io> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 20:15:33 +00:00
else if (uffd_wp_resolve)
userfaultfd: wp: apply _PAGE_UFFD_WP bit Firstly, introduce two new flags MM_CP_UFFD_WP[_RESOLVE] for change_protection() when used with uffd-wp and make sure the two new flags are exclusively used. Then, - For MM_CP_UFFD_WP: apply the _PAGE_UFFD_WP bit and remove _PAGE_RW when a range of memory is write protected by uffd - For MM_CP_UFFD_WP_RESOLVE: remove the _PAGE_UFFD_WP bit and recover _PAGE_RW when write protection is resolved from userspace And use this new interface in mwriteprotect_range() to replace the old MM_CP_DIRTY_ACCT. Do this change for both PTEs and huge PMDs. Then we can start to identify which PTE/PMD is write protected by general (e.g., COW or soft dirty tracking), and which is for userfaultfd-wp. Since we should keep the _PAGE_UFFD_WP when doing pte_modify(), add it into _PAGE_CHG_MASK as well. Meanwhile, since we have this new bit, we can be even more strict when detecting uffd-wp page faults in either do_wp_page() or wp_huge_pmd(). After we're with _PAGE_UFFD_WP, a special case is when a page is both protected by the general COW logic and also userfault-wp. Here the userfault-wp will have higher priority and will be handled first. Only after the uffd-wp bit is cleared on the PTE/PMD will we continue to handle the general COW. These are the steps on what will happen with such a page: 1. CPU accesses write protected shared page (so both protected by general COW and uffd-wp), blocked by uffd-wp first because in do_wp_page we'll handle uffd-wp first, so it has higher priority than general COW. 2. Uffd service thread receives the request, do UFFDIO_WRITEPROTECT to remove the uffd-wp bit upon the PTE/PMD. However here we still keep the write bit cleared. Notify the blocked CPU. 3. The blocked CPU resumes the page fault process with a fault retry, during retry it'll notice it was not with the uffd-wp bit this time but it is still write protected by general COW, then it'll go though the COW path in the fault handler, copy the page, apply write bit where necessary, and retry again. 4. The CPU will be able to access this page with write bit set. Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Martin Cracauer <cracauer@cons.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-8-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:05:49 +00:00
ptent = pte_clear_uffd_wp(ptent);
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we can try mapping anonymous pages in a private writable mapping writable if they are exclusive, the PTE is already dirty, and no special handling applies. Mapping the anonymous page writable is essentially the same thing the write fault handler would do in this case. Special handling is required for uffd-wp and softdirty tracking, so take care of that properly. Also, leave PROT_NONE handling alone for now; in the future, we could similarly extend the logic in do_numa_page() or use pte_mk_savedwrite() here. While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE) performance, it should also be a valuable optimization for uffd-wp, when un-protecting. This has been previously suggested by Peter Collingbourne in [1], relevant in the context of the Scudo memory allocator, before we had PageAnonExclusive. This commit doesn't add the same handling for PMDs (i.e., anonymous THP, anonymous hugetlb); benchmark results from Andrea indicate that there are minor performance gains, so it's might still be valuable to streamline that logic for all anonymous pages in the future. As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually happening. Micro-benchmark courtesy of Andrea: === #define _GNU_SOURCE #include <sys/mman.h> #include <stdlib.h> #include <string.h> #include <stdio.h> #include <unistd.h> #define SIZE (1024*1024*1024) int main(int argc, char *argv[]) { char *p; if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE)) perror("posix_memalign"), exit(1); if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE)) perror("madvise"); explicit_bzero(p, SIZE); for (int loops = 0; loops < 40; loops++) { if (mprotect(p, SIZE, PROT_READ)) perror("mprotect"), exit(1); if (mprotect(p, SIZE, PROT_READ|PROT_WRITE)) perror("mprotect"), exit(1); explicit_bzero(p, SIZE); } } === Results on my Ryzen 9 3900X: Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043 Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026 === [1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Suggested-by: Peter Collingbourne <pcc@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 09:36:29 +00:00
/*
* In some writable, shared mappings, we might want
* to catch actual write access -- see
* vma_wants_writenotify().
*
* In all writable, private mappings, we have to
* properly handle COW.
*
* In both cases, we can sometimes still change PTEs
* writable and avoid the write-fault handler, for
* example, if a PTE is already dirty and no other
* COW or special handling is required.
*/
if ((cp_flags & MM_CP_TRY_CHANGE_WRITABLE) &&
!pte_write(ptent) &&
can_change_pte_writable(vma, addr, ptent))
mm: Make pte_mkwrite() take a VMA The x86 Shadow stack feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly. One of these unusual properties is that shadow stack memory is writable, but only in limited ways. These limits are applied via a specific PTE bit combination. Nevertheless, the memory is writable, and core mm code will need to apply the writable permissions in the typical paths that call pte_mkwrite(). Future patches will make pte_mkwrite() take a VMA, so that the x86 implementation of it can know whether to create regular writable or shadow stack mappings. But there are a couple of challenges to this. Modifying the signatures of each arch pte_mkwrite() implementation would be error prone because some are generated with macros and would need to be re-implemented. Also, some pte_mkwrite() callers operate on kernel memory without a VMA. So this can be done in a three step process. First pte_mkwrite() can be renamed to pte_mkwrite_novma() in each arch, with a generic pte_mkwrite() added that just calls pte_mkwrite_novma(). Next callers without a VMA can be moved to pte_mkwrite_novma(). And lastly, pte_mkwrite() and all callers can be changed to take/pass a VMA. Previous work pte_mkwrite() renamed pte_mkwrite_novma() and converted callers that don't have a VMA were to use pte_mkwrite_novma(). So now change pte_mkwrite() to take a VMA and change the remaining callers to pass a VMA. Apply the same changes for pmd_mkwrite(). No functional change. Suggested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/all/20230613001108.3040476-4-rick.p.edgecombe%40intel.com
2023-06-13 00:10:29 +00:00
ptent = pte_mkwrite(ptent, vma);
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we can try mapping anonymous pages in a private writable mapping writable if they are exclusive, the PTE is already dirty, and no special handling applies. Mapping the anonymous page writable is essentially the same thing the write fault handler would do in this case. Special handling is required for uffd-wp and softdirty tracking, so take care of that properly. Also, leave PROT_NONE handling alone for now; in the future, we could similarly extend the logic in do_numa_page() or use pte_mk_savedwrite() here. While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE) performance, it should also be a valuable optimization for uffd-wp, when un-protecting. This has been previously suggested by Peter Collingbourne in [1], relevant in the context of the Scudo memory allocator, before we had PageAnonExclusive. This commit doesn't add the same handling for PMDs (i.e., anonymous THP, anonymous hugetlb); benchmark results from Andrea indicate that there are minor performance gains, so it's might still be valuable to streamline that logic for all anonymous pages in the future. As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually happening. Micro-benchmark courtesy of Andrea: === #define _GNU_SOURCE #include <sys/mman.h> #include <stdlib.h> #include <string.h> #include <stdio.h> #include <unistd.h> #define SIZE (1024*1024*1024) int main(int argc, char *argv[]) { char *p; if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE)) perror("posix_memalign"), exit(1); if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE)) perror("madvise"); explicit_bzero(p, SIZE); for (int loops = 0; loops < 40; loops++) { if (mprotect(p, SIZE, PROT_READ)) perror("mprotect"), exit(1); if (mprotect(p, SIZE, PROT_READ|PROT_WRITE)) perror("mprotect"), exit(1); explicit_bzero(p, SIZE); } } === Results on my Ryzen 9 3900X: Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043 Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026 === [1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Suggested-by: Peter Collingbourne <pcc@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 09:36:29 +00:00
ptep_modify_prot_commit(vma, addr, pte, oldpte, ptent);
if (pte_needs_flush(oldpte, ptent))
tlb_flush_pte_range(tlb, addr, PAGE_SIZE);
pages++;
userfaultfd: wp: support swap and page migration For either swap and page migration, we all use the bit 2 of the entry to identify whether this entry is uffd write-protected. It plays a similar role as the existing soft dirty bit in swap entries but only for keeping the uffd-wp tracking for a specific PTE/PMD. Something special here is that when we want to recover the uffd-wp bit from a swap/migration entry to the PTE bit we'll also need to take care of the _PAGE_RW bit and make sure it's cleared, otherwise even with the _PAGE_UFFD_WP bit we can't trap it at all. In change_pte_range() we do nothing for uffd if the PTE is a swap entry. That can lead to data mismatch if the page that we are going to write protect is swapped out when sending the UFFDIO_WRITEPROTECT. This patch also applies/removes the uffd-wp bit even for the swap entries. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-11-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:06:01 +00:00
} else if (is_swap_pte(oldpte)) {
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
swp_entry_t entry = pte_to_swp_entry(oldpte);
userfaultfd: wp: support swap and page migration For either swap and page migration, we all use the bit 2 of the entry to identify whether this entry is uffd write-protected. It plays a similar role as the existing soft dirty bit in swap entries but only for keeping the uffd-wp tracking for a specific PTE/PMD. Something special here is that when we want to recover the uffd-wp bit from a swap/migration entry to the PTE bit we'll also need to take care of the _PAGE_RW bit and make sure it's cleared, otherwise even with the _PAGE_UFFD_WP bit we can't trap it at all. In change_pte_range() we do nothing for uffd if the PTE is a swap entry. That can lead to data mismatch if the page that we are going to write protect is swapped out when sending the UFFDIO_WRITEPROTECT. This patch also applies/removes the uffd-wp bit even for the swap entries. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-11-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:06:01 +00:00
pte_t newpte;
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
if (is_writable_migration_entry(entry)) {
mm/mprotect: only reference swap pfn page if type match Yu Zhao reported a bug after the commit "mm/swap: Add swp_offset_pfn() to fetch PFN from swap entry" added a check in swp_offset_pfn() for swap type [1]: kernel BUG at include/linux/swapops.h:117! CPU: 46 PID: 5245 Comm: EventManager_De Tainted: G S O L 6.0.0-dbg-DEV #2 RIP: 0010:pfn_swap_entry_to_page+0x72/0xf0 Code: c6 48 8b 36 48 83 fe ff 74 53 48 01 d1 48 83 c1 08 48 8b 09 f6 c1 01 75 7b 66 90 48 89 c1 48 8b 09 f6 c1 01 74 74 5d c3 eb 9e <0f> 0b 48 ba ff ff ff ff 03 00 00 00 eb ae a9 ff 0f 00 00 75 13 48 RSP: 0018:ffffa59e73fabb80 EFLAGS: 00010282 RAX: 00000000ffffffe8 RBX: 0c00000000000000 RCX: ffffcd5440000000 RDX: 1ffffffffff7a80a RSI: 0000000000000000 RDI: 0c0000000000042b RBP: ffffa59e73fabb80 R08: ffff9965ca6e8bb8 R09: 0000000000000000 R10: ffffffffa5a2f62d R11: 0000030b372e9fff R12: ffff997b79db5738 R13: 000000000000042b R14: 0c0000000000042b R15: 1ffffffffff7a80a FS: 00007f549d1bb700(0000) GS:ffff99d3cf680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000440d035b3180 CR3: 0000002243176004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> change_pte_range+0x36e/0x880 change_p4d_range+0x2e8/0x670 change_protection_range+0x14e/0x2c0 mprotect_fixup+0x1ee/0x330 do_mprotect_pkey+0x34c/0x440 __x64_sys_mprotect+0x1d/0x30 It triggers because pfn_swap_entry_to_page() could be called upon e.g. a genuine swap entry. Fix it by only calling it when it's a write migration entry where the page* is used. [1] https://lore.kernel.org/lkml/CAOUHufaVC2Za-p8m0aiHw6YkheDcrO-C3wRGixwDS32VTS+k1w@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220823221138.45602-1-peterx@redhat.com Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: Yu Zhao <yuzhao@google.com> Tested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-23 22:11:38 +00:00
struct page *page = pfn_swap_entry_to_page(entry);
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
/*
* A protection check is difficult so
* just be safe and disable write
*/
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
if (PageAnon(page))
entry = make_readable_exclusive_migration_entry(
swp_offset(entry));
else
entry = make_readable_migration_entry(swp_offset(entry));
newpte = swp_entry_to_pte(entry);
if (pte_swp_soft_dirty(oldpte))
newpte = pte_swp_mksoft_dirty(newpte);
} else if (is_writable_device_private_entry(entry)) {
mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory HMM (heterogeneous memory management) need struct page to support migration from system main memory to device memory. Reasons for HMM and migration to device memory is explained with HMM core patch. This patch deals with device memory that is un-addressable memory (ie CPU can not access it). Hence we do not want those struct page to be manage like regular memory. That is why we extend ZONE_DEVICE to support different types of memory. A persistent memory type is define for existing user of ZONE_DEVICE and a new device un-addressable type is added for the un-addressable memory type. There is a clear separation between what is expected from each memory type and existing user of ZONE_DEVICE are un-affected by new requirement and new use of the un-addressable type. All specific code path are protect with test against the memory type. Because memory is un-addressable we use a new special swap type for when a page is migrated to device memory (this reduces the number of maximum swap file). The main two additions beside memory type to ZONE_DEVICE is two callbacks. First one, page_free() is call whenever page refcount reach 1 (which means the page is free as ZONE_DEVICE page never reach a refcount of 0). This allow device driver to manage its memory and associated struct page. The second callback page_fault() happens when there is a CPU access to an address that is back by a device page (which are un-addressable by the CPU). This callback is responsible to migrate the page back to system main memory. Device driver can not block migration back to system memory, HMM make sure that such page can not be pin into device memory. If device is in some error condition and can not migrate memory back then a CPU page fault to device memory should end with SIGBUS. [arnd@arndb.de: fix warning] Link: http://lkml.kernel.org/r/20170823133213.712917-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170817000548.32038-8-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:43 +00:00
/*
* We do not preserve soft-dirtiness. See
* copy_nonpresent_pte() for explanation.
mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory HMM (heterogeneous memory management) need struct page to support migration from system main memory to device memory. Reasons for HMM and migration to device memory is explained with HMM core patch. This patch deals with device memory that is un-addressable memory (ie CPU can not access it). Hence we do not want those struct page to be manage like regular memory. That is why we extend ZONE_DEVICE to support different types of memory. A persistent memory type is define for existing user of ZONE_DEVICE and a new device un-addressable type is added for the un-addressable memory type. There is a clear separation between what is expected from each memory type and existing user of ZONE_DEVICE are un-affected by new requirement and new use of the un-addressable type. All specific code path are protect with test against the memory type. Because memory is un-addressable we use a new special swap type for when a page is migrated to device memory (this reduces the number of maximum swap file). The main two additions beside memory type to ZONE_DEVICE is two callbacks. First one, page_free() is call whenever page refcount reach 1 (which means the page is free as ZONE_DEVICE page never reach a refcount of 0). This allow device driver to manage its memory and associated struct page. The second callback page_fault() happens when there is a CPU access to an address that is back by a device page (which are un-addressable by the CPU). This callback is responsible to migrate the page back to system main memory. Device driver can not block migration back to system memory, HMM make sure that such page can not be pin into device memory. If device is in some error condition and can not migrate memory back then a CPU page fault to device memory should end with SIGBUS. [arnd@arndb.de: fix warning] Link: http://lkml.kernel.org/r/20170823133213.712917-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170817000548.32038-8-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:43 +00:00
*/
entry = make_readable_device_private_entry(
swp_offset(entry));
mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory HMM (heterogeneous memory management) need struct page to support migration from system main memory to device memory. Reasons for HMM and migration to device memory is explained with HMM core patch. This patch deals with device memory that is un-addressable memory (ie CPU can not access it). Hence we do not want those struct page to be manage like regular memory. That is why we extend ZONE_DEVICE to support different types of memory. A persistent memory type is define for existing user of ZONE_DEVICE and a new device un-addressable type is added for the un-addressable memory type. There is a clear separation between what is expected from each memory type and existing user of ZONE_DEVICE are un-affected by new requirement and new use of the un-addressable type. All specific code path are protect with test against the memory type. Because memory is un-addressable we use a new special swap type for when a page is migrated to device memory (this reduces the number of maximum swap file). The main two additions beside memory type to ZONE_DEVICE is two callbacks. First one, page_free() is call whenever page refcount reach 1 (which means the page is free as ZONE_DEVICE page never reach a refcount of 0). This allow device driver to manage its memory and associated struct page. The second callback page_fault() happens when there is a CPU access to an address that is back by a device page (which are un-addressable by the CPU). This callback is responsible to migrate the page back to system main memory. Device driver can not block migration back to system memory, HMM make sure that such page can not be pin into device memory. If device is in some error condition and can not migrate memory back then a CPU page fault to device memory should end with SIGBUS. [arnd@arndb.de: fix warning] Link: http://lkml.kernel.org/r/20170823133213.712917-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170817000548.32038-8-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:43 +00:00
newpte = swp_entry_to_pte(entry);
userfaultfd: wp: support swap and page migration For either swap and page migration, we all use the bit 2 of the entry to identify whether this entry is uffd write-protected. It plays a similar role as the existing soft dirty bit in swap entries but only for keeping the uffd-wp tracking for a specific PTE/PMD. Something special here is that when we want to recover the uffd-wp bit from a swap/migration entry to the PTE bit we'll also need to take care of the _PAGE_RW bit and make sure it's cleared, otherwise even with the _PAGE_UFFD_WP bit we can't trap it at all. In change_pte_range() we do nothing for uffd if the PTE is a swap entry. That can lead to data mismatch if the page that we are going to write protect is swapped out when sending the UFFDIO_WRITEPROTECT. This patch also applies/removes the uffd-wp bit even for the swap entries. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-11-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:06:01 +00:00
if (pte_swp_uffd_wp(oldpte))
newpte = pte_swp_mkuffd_wp(newpte);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
} else if (is_writable_device_exclusive_entry(entry)) {
entry = make_readable_device_exclusive_entry(
swp_offset(entry));
newpte = swp_entry_to_pte(entry);
if (pte_swp_soft_dirty(oldpte))
newpte = pte_swp_mksoft_dirty(newpte);
if (pte_swp_uffd_wp(oldpte))
newpte = pte_swp_mkuffd_wp(newpte);
mm: fix a few rare cases of using swapin error pte marker This patch should harden commit 15520a3f0469 ("mm: use pte markers for swap errors") on using pte markers for swapin errors on a few corner cases. 1. Propagate swapin errors across fork()s: if there're swapin errors in the parent mm, after fork()s the child should sigbus too when an error page is accessed. 2. Fix a rare condition race in pte_marker_clear() where a uffd-wp pte marker can be quickly switched to a swapin error. 3. Explicitly ignore swapin error pte markers in change_protection(). I mostly don't worry on (2) or (3) at all, but we should still have them. Case (1) is special because it can potentially cause silent data corrupt on child when parent has swapin error triggered with swapoff, but since swapin error is rare itself already it's probably not easy to trigger either. Currently there is a priority difference between the uffd-wp bit and the swapin error entry, in which the swapin error always has higher priority (e.g. we don't need to wr-protect a swapin error pte marker). If there will be a 3rd bit introduced, we'll probably need to consider a more involved approach so we may need to start operate on the bits. Let's leave that for later. This patch is tested with case (1) explicitly where we'll get corrupted data before in the child if there's existing swapin error pte markers, and after patch applied the child can be rightfully killed. We don't need to copy stable for this one since 15520a3f0469 just landed as part of v6.2-rc1, only "Fixes" applied. Link: https://lkml.kernel.org/r/20221214200453.1772655-3-peterx@redhat.com Fixes: 15520a3f0469 ("mm: use pte markers for swap errors") Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 20:04:53 +00:00
} else if (is_pte_marker_entry(entry)) {
/*
mm: make PTE_MARKER_SWAPIN_ERROR more general Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD", v4. This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4 for a detailed description of the feature. This patch (of 8): Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement UFFDIO_POISON, so make some various preparations for that: First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be confusing since we're going to re-use it for something not really related to swap. This can be particularly confusing for things like hugetlbfs, which doesn't support swap whatsoever. Also rename some various helper functions. Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap. But, since we're going to re-use it, we want it to go ahead and copy it just like non-hugetlbfs memory does today. Since the code to do this is more complicated now, pull it out into a helper which can be re-used in both places. While we're at it, also make it slightly more explicit in its handling of e.g. uffd wp markers. For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't matter, e.g. a userspace program would receive a SIGBUS either way. But for UFFDIO_POISON, this change will let KVM guests get an MCE out of the box, instead of giving a SIGBUS to the hypervisor and requiring it to somehow inject an MCE. Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today because the lack of swap support means we'll never end up with such a PTE anyway, but this behavior will be needed once such entries *can* show up via UFFDIO_POISON. Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gaosheng Cui <cuigaosheng1@huawei.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Houghton <jthoughton@google.com> Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: T.J. Alumbaugh <talumbau@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-07 21:55:33 +00:00
* Ignore error swap entries unconditionally,
mm: fix a few rare cases of using swapin error pte marker This patch should harden commit 15520a3f0469 ("mm: use pte markers for swap errors") on using pte markers for swapin errors on a few corner cases. 1. Propagate swapin errors across fork()s: if there're swapin errors in the parent mm, after fork()s the child should sigbus too when an error page is accessed. 2. Fix a rare condition race in pte_marker_clear() where a uffd-wp pte marker can be quickly switched to a swapin error. 3. Explicitly ignore swapin error pte markers in change_protection(). I mostly don't worry on (2) or (3) at all, but we should still have them. Case (1) is special because it can potentially cause silent data corrupt on child when parent has swapin error triggered with swapoff, but since swapin error is rare itself already it's probably not easy to trigger either. Currently there is a priority difference between the uffd-wp bit and the swapin error entry, in which the swapin error always has higher priority (e.g. we don't need to wr-protect a swapin error pte marker). If there will be a 3rd bit introduced, we'll probably need to consider a more involved approach so we may need to start operate on the bits. Let's leave that for later. This patch is tested with case (1) explicitly where we'll get corrupted data before in the child if there's existing swapin error pte markers, and after patch applied the child can be rightfully killed. We don't need to copy stable for this one since 15520a3f0469 just landed as part of v6.2-rc1, only "Fixes" applied. Link: https://lkml.kernel.org/r/20221214200453.1772655-3-peterx@redhat.com Fixes: 15520a3f0469 ("mm: use pte markers for swap errors") Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 20:04:53 +00:00
* because any access should sigbus anyway.
*/
mm: make PTE_MARKER_SWAPIN_ERROR more general Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD", v4. This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4 for a detailed description of the feature. This patch (of 8): Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement UFFDIO_POISON, so make some various preparations for that: First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be confusing since we're going to re-use it for something not really related to swap. This can be particularly confusing for things like hugetlbfs, which doesn't support swap whatsoever. Also rename some various helper functions. Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap. But, since we're going to re-use it, we want it to go ahead and copy it just like non-hugetlbfs memory does today. Since the code to do this is more complicated now, pull it out into a helper which can be re-used in both places. While we're at it, also make it slightly more explicit in its handling of e.g. uffd wp markers. For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't matter, e.g. a userspace program would receive a SIGBUS either way. But for UFFDIO_POISON, this change will let KVM guests get an MCE out of the box, instead of giving a SIGBUS to the hypervisor and requiring it to somehow inject an MCE. Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today because the lack of swap support means we'll never end up with such a PTE anyway, but this behavior will be needed once such entries *can* show up via UFFDIO_POISON. Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gaosheng Cui <cuigaosheng1@huawei.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Houghton <jthoughton@google.com> Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: T.J. Alumbaugh <talumbau@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-07 21:55:33 +00:00
if (is_poisoned_swp_entry(entry))
mm: fix a few rare cases of using swapin error pte marker This patch should harden commit 15520a3f0469 ("mm: use pte markers for swap errors") on using pte markers for swapin errors on a few corner cases. 1. Propagate swapin errors across fork()s: if there're swapin errors in the parent mm, after fork()s the child should sigbus too when an error page is accessed. 2. Fix a rare condition race in pte_marker_clear() where a uffd-wp pte marker can be quickly switched to a swapin error. 3. Explicitly ignore swapin error pte markers in change_protection(). I mostly don't worry on (2) or (3) at all, but we should still have them. Case (1) is special because it can potentially cause silent data corrupt on child when parent has swapin error triggered with swapoff, but since swapin error is rare itself already it's probably not easy to trigger either. Currently there is a priority difference between the uffd-wp bit and the swapin error entry, in which the swapin error always has higher priority (e.g. we don't need to wr-protect a swapin error pte marker). If there will be a 3rd bit introduced, we'll probably need to consider a more involved approach so we may need to start operate on the bits. Let's leave that for later. This patch is tested with case (1) explicitly where we'll get corrupted data before in the child if there's existing swapin error pte markers, and after patch applied the child can be rightfully killed. We don't need to copy stable for this one since 15520a3f0469 just landed as part of v6.2-rc1, only "Fixes" applied. Link: https://lkml.kernel.org/r/20221214200453.1772655-3-peterx@redhat.com Fixes: 15520a3f0469 ("mm: use pte markers for swap errors") Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 20:04:53 +00:00
continue;
mm/shmem: allow uffd wr-protect none pte for file-backed mem File-backed memory differs from anonymous memory in that even if the pte is missing, the data could still resides either in the file or in page/swap cache. So when wr-protect a pte, we need to consider none ptes too. We do that by installing the uffd-wp pte markers when necessary. So when there's a future write to the pte, the fault handler will go the special path to first fault-in the page as read-only, then report to userfaultfd server with the wr-protect message. On the other hand, when unprotecting a page, it's also possible that the pte got unmapped but replaced by the special uffd-wp marker. Then we'll need to be able to recover from a uffd-wp pte marker into a none pte, so that the next access to the page will fault in correctly as usual when accessed the next time. Special care needs to be taken throughout the change_protection_range() process. Since now we allow user to wr-protect a none pte, we need to be able to pre-populate the page table entries if we see (!anonymous && MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always skip when the pgtable entry does not exist. For example, the pgtable can be missing for a whole chunk of 2M pmd, but the page cache can exist for the 2M range. When we want to wr-protect one 4K page within the 2M pmd range, we need to pre-populate the pgtable and install the pte marker showing that we want to get a message and block the thread when the page cache of that 4K page is written. Without pre-populating the pmd, change_protection() will simply skip that whole pmd. Note that this patch only covers the small pages (pte level) but not covering any of the transparent huge pages yet. That will be done later, and this patch will be a preparation for it too. Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
/*
* If this is uffd-wp pte marker and we'd like
* to unprotect it, drop it; the next page
* fault will trigger without uffd trapping.
*/
if (uffd_wp_resolve) {
pte_clear(vma->vm_mm, addr, pte);
pages++;
}
continue;
userfaultfd: wp: support swap and page migration For either swap and page migration, we all use the bit 2 of the entry to identify whether this entry is uffd write-protected. It plays a similar role as the existing soft dirty bit in swap entries but only for keeping the uffd-wp tracking for a specific PTE/PMD. Something special here is that when we want to recover the uffd-wp bit from a swap/migration entry to the PTE bit we'll also need to take care of the _PAGE_RW bit and make sure it's cleared, otherwise even with the _PAGE_UFFD_WP bit we can't trap it at all. In change_pte_range() we do nothing for uffd if the PTE is a swap entry. That can lead to data mismatch if the page that we are going to write protect is swapped out when sending the UFFDIO_WRITEPROTECT. This patch also applies/removes the uffd-wp bit even for the swap entries. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-11-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:06:01 +00:00
} else {
newpte = oldpte;
}
mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory HMM (heterogeneous memory management) need struct page to support migration from system main memory to device memory. Reasons for HMM and migration to device memory is explained with HMM core patch. This patch deals with device memory that is un-addressable memory (ie CPU can not access it). Hence we do not want those struct page to be manage like regular memory. That is why we extend ZONE_DEVICE to support different types of memory. A persistent memory type is define for existing user of ZONE_DEVICE and a new device un-addressable type is added for the un-addressable memory type. There is a clear separation between what is expected from each memory type and existing user of ZONE_DEVICE are un-affected by new requirement and new use of the un-addressable type. All specific code path are protect with test against the memory type. Because memory is un-addressable we use a new special swap type for when a page is migrated to device memory (this reduces the number of maximum swap file). The main two additions beside memory type to ZONE_DEVICE is two callbacks. First one, page_free() is call whenever page refcount reach 1 (which means the page is free as ZONE_DEVICE page never reach a refcount of 0). This allow device driver to manage its memory and associated struct page. The second callback page_fault() happens when there is a CPU access to an address that is back by a device page (which are un-addressable by the CPU). This callback is responsible to migrate the page back to system main memory. Device driver can not block migration back to system memory, HMM make sure that such page can not be pin into device memory. If device is in some error condition and can not migrate memory back then a CPU page fault to device memory should end with SIGBUS. [arnd@arndb.de: fix warning] Link: http://lkml.kernel.org/r/20170823133213.712917-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170817000548.32038-8-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:43 +00:00
userfaultfd: wp: support swap and page migration For either swap and page migration, we all use the bit 2 of the entry to identify whether this entry is uffd write-protected. It plays a similar role as the existing soft dirty bit in swap entries but only for keeping the uffd-wp tracking for a specific PTE/PMD. Something special here is that when we want to recover the uffd-wp bit from a swap/migration entry to the PTE bit we'll also need to take care of the _PAGE_RW bit and make sure it's cleared, otherwise even with the _PAGE_UFFD_WP bit we can't trap it at all. In change_pte_range() we do nothing for uffd if the PTE is a swap entry. That can lead to data mismatch if the page that we are going to write protect is swapped out when sending the UFFDIO_WRITEPROTECT. This patch also applies/removes the uffd-wp bit even for the swap entries. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-11-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:06:01 +00:00
if (uffd_wp)
newpte = pte_swp_mkuffd_wp(newpte);
else if (uffd_wp_resolve)
newpte = pte_swp_clear_uffd_wp(newpte);
if (!pte_same(oldpte, newpte)) {
set_pte_at(vma->vm_mm, addr, pte, newpte);
mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory HMM (heterogeneous memory management) need struct page to support migration from system main memory to device memory. Reasons for HMM and migration to device memory is explained with HMM core patch. This patch deals with device memory that is un-addressable memory (ie CPU can not access it). Hence we do not want those struct page to be manage like regular memory. That is why we extend ZONE_DEVICE to support different types of memory. A persistent memory type is define for existing user of ZONE_DEVICE and a new device un-addressable type is added for the un-addressable memory type. There is a clear separation between what is expected from each memory type and existing user of ZONE_DEVICE are un-affected by new requirement and new use of the un-addressable type. All specific code path are protect with test against the memory type. Because memory is un-addressable we use a new special swap type for when a page is migrated to device memory (this reduces the number of maximum swap file). The main two additions beside memory type to ZONE_DEVICE is two callbacks. First one, page_free() is call whenever page refcount reach 1 (which means the page is free as ZONE_DEVICE page never reach a refcount of 0). This allow device driver to manage its memory and associated struct page. The second callback page_fault() happens when there is a CPU access to an address that is back by a device page (which are un-addressable by the CPU). This callback is responsible to migrate the page back to system main memory. Device driver can not block migration back to system memory, HMM make sure that such page can not be pin into device memory. If device is in some error condition and can not migrate memory back then a CPU page fault to device memory should end with SIGBUS. [arnd@arndb.de: fix warning] Link: http://lkml.kernel.org/r/20170823133213.712917-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170817000548.32038-8-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:43 +00:00
pages++;
}
mm/shmem: allow uffd wr-protect none pte for file-backed mem File-backed memory differs from anonymous memory in that even if the pte is missing, the data could still resides either in the file or in page/swap cache. So when wr-protect a pte, we need to consider none ptes too. We do that by installing the uffd-wp pte markers when necessary. So when there's a future write to the pte, the fault handler will go the special path to first fault-in the page as read-only, then report to userfaultfd server with the wr-protect message. On the other hand, when unprotecting a page, it's also possible that the pte got unmapped but replaced by the special uffd-wp marker. Then we'll need to be able to recover from a uffd-wp pte marker into a none pte, so that the next access to the page will fault in correctly as usual when accessed the next time. Special care needs to be taken throughout the change_protection_range() process. Since now we allow user to wr-protect a none pte, we need to be able to pre-populate the page table entries if we see (!anonymous && MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always skip when the pgtable entry does not exist. For example, the pgtable can be missing for a whole chunk of 2M pmd, but the page cache can exist for the 2M range. When we want to wr-protect one 4K page within the 2M pmd range, we need to pre-populate the pgtable and install the pte marker showing that we want to get a message and block the thread when the page cache of that 4K page is written. Without pre-populating the pmd, change_protection() will simply skip that whole pmd. Note that this patch only covers the small pages (pte level) but not covering any of the transparent huge pages yet. That will be done later, and this patch will be a preparation for it too. Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
} else {
/* It must be an none page, or what else?.. */
WARN_ON_ONCE(!pte_none(oldpte));
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
/*
* Nobody plays with any none ptes besides
* userfaultfd when applying the protections.
*/
if (likely(!uffd_wp))
continue;
if (userfaultfd_wp_use_markers(vma)) {
mm/shmem: allow uffd wr-protect none pte for file-backed mem File-backed memory differs from anonymous memory in that even if the pte is missing, the data could still resides either in the file or in page/swap cache. So when wr-protect a pte, we need to consider none ptes too. We do that by installing the uffd-wp pte markers when necessary. So when there's a future write to the pte, the fault handler will go the special path to first fault-in the page as read-only, then report to userfaultfd server with the wr-protect message. On the other hand, when unprotecting a page, it's also possible that the pte got unmapped but replaced by the special uffd-wp marker. Then we'll need to be able to recover from a uffd-wp pte marker into a none pte, so that the next access to the page will fault in correctly as usual when accessed the next time. Special care needs to be taken throughout the change_protection_range() process. Since now we allow user to wr-protect a none pte, we need to be able to pre-populate the page table entries if we see (!anonymous && MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always skip when the pgtable entry does not exist. For example, the pgtable can be missing for a whole chunk of 2M pmd, but the page cache can exist for the 2M range. When we want to wr-protect one 4K page within the 2M pmd range, we need to pre-populate the pgtable and install the pte marker showing that we want to get a message and block the thread when the page cache of that 4K page is written. Without pre-populating the pmd, change_protection() will simply skip that whole pmd. Note that this patch only covers the small pages (pte level) but not covering any of the transparent huge pages yet. That will be done later, and this patch will be a preparation for it too. Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
/*
* For file-backed mem, we need to be able to
* wr-protect a none pte, because even if the
* pte is none, the page/swap cache could
* exist. Doing that by install a marker.
*/
set_pte_at(vma->vm_mm, addr, pte,
make_pte_marker(PTE_MARKER_UFFD_WP));
pages++;
}
}
} while (pte++, addr += PAGE_SIZE, addr != end);
arch_leave_lazy_mmu_mode();
pte_unmap_unlock(pte - 1, ptl);
return pages;
}
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
/*
* Return true if we want to split THPs into PTE mappings in change
* protection procedure, false otherwise.
*/
mm/shmem: allow uffd wr-protect none pte for file-backed mem File-backed memory differs from anonymous memory in that even if the pte is missing, the data could still resides either in the file or in page/swap cache. So when wr-protect a pte, we need to consider none ptes too. We do that by installing the uffd-wp pte markers when necessary. So when there's a future write to the pte, the fault handler will go the special path to first fault-in the page as read-only, then report to userfaultfd server with the wr-protect message. On the other hand, when unprotecting a page, it's also possible that the pte got unmapped but replaced by the special uffd-wp marker. Then we'll need to be able to recover from a uffd-wp pte marker into a none pte, so that the next access to the page will fault in correctly as usual when accessed the next time. Special care needs to be taken throughout the change_protection_range() process. Since now we allow user to wr-protect a none pte, we need to be able to pre-populate the page table entries if we see (!anonymous && MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always skip when the pgtable entry does not exist. For example, the pgtable can be missing for a whole chunk of 2M pmd, but the page cache can exist for the 2M range. When we want to wr-protect one 4K page within the 2M pmd range, we need to pre-populate the pgtable and install the pte marker showing that we want to get a message and block the thread when the page cache of that 4K page is written. Without pre-populating the pmd, change_protection() will simply skip that whole pmd. Note that this patch only covers the small pages (pte level) but not covering any of the transparent huge pages yet. That will be done later, and this patch will be a preparation for it too. Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
static inline bool
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
pgtable_split_needed(struct vm_area_struct *vma, unsigned long cp_flags)
mm/shmem: allow uffd wr-protect none pte for file-backed mem File-backed memory differs from anonymous memory in that even if the pte is missing, the data could still resides either in the file or in page/swap cache. So when wr-protect a pte, we need to consider none ptes too. We do that by installing the uffd-wp pte markers when necessary. So when there's a future write to the pte, the fault handler will go the special path to first fault-in the page as read-only, then report to userfaultfd server with the wr-protect message. On the other hand, when unprotecting a page, it's also possible that the pte got unmapped but replaced by the special uffd-wp marker. Then we'll need to be able to recover from a uffd-wp pte marker into a none pte, so that the next access to the page will fault in correctly as usual when accessed the next time. Special care needs to be taken throughout the change_protection_range() process. Since now we allow user to wr-protect a none pte, we need to be able to pre-populate the page table entries if we see (!anonymous && MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always skip when the pgtable entry does not exist. For example, the pgtable can be missing for a whole chunk of 2M pmd, but the page cache can exist for the 2M range. When we want to wr-protect one 4K page within the 2M pmd range, we need to pre-populate the pgtable and install the pte marker showing that we want to get a message and block the thread when the page cache of that 4K page is written. Without pre-populating the pmd, change_protection() will simply skip that whole pmd. Note that this patch only covers the small pages (pte level) but not covering any of the transparent huge pages yet. That will be done later, and this patch will be a preparation for it too. Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
{
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
/*
* pte markers only resides in pte level, if we need pte markers,
* we need to split. We cannot wr-protect shmem thp because file
* thp is handled differently when split by erasing the pmd so far.
*/
mm/shmem: allow uffd wr-protect none pte for file-backed mem File-backed memory differs from anonymous memory in that even if the pte is missing, the data could still resides either in the file or in page/swap cache. So when wr-protect a pte, we need to consider none ptes too. We do that by installing the uffd-wp pte markers when necessary. So when there's a future write to the pte, the fault handler will go the special path to first fault-in the page as read-only, then report to userfaultfd server with the wr-protect message. On the other hand, when unprotecting a page, it's also possible that the pte got unmapped but replaced by the special uffd-wp marker. Then we'll need to be able to recover from a uffd-wp pte marker into a none pte, so that the next access to the page will fault in correctly as usual when accessed the next time. Special care needs to be taken throughout the change_protection_range() process. Since now we allow user to wr-protect a none pte, we need to be able to pre-populate the page table entries if we see (!anonymous && MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always skip when the pgtable entry does not exist. For example, the pgtable can be missing for a whole chunk of 2M pmd, but the page cache can exist for the 2M range. When we want to wr-protect one 4K page within the 2M pmd range, we need to pre-populate the pgtable and install the pte marker showing that we want to get a message and block the thread when the page cache of that 4K page is written. Without pre-populating the pmd, change_protection() will simply skip that whole pmd. Note that this patch only covers the small pages (pte level) but not covering any of the transparent huge pages yet. That will be done later, and this patch will be a preparation for it too. Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
return (cp_flags & MM_CP_UFFD_WP) && !vma_is_anonymous(vma);
}
/*
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
* Return true if we want to populate pgtables in change protection
* procedure, false otherwise
*/
static inline bool
pgtable_populate_needed(struct vm_area_struct *vma, unsigned long cp_flags)
{
/* If not within ioctl(UFFDIO_WRITEPROTECT), then don't bother */
if (!(cp_flags & MM_CP_UFFD_WP))
return false;
/* Populate if the userfaultfd mode requires pte markers */
return userfaultfd_wp_use_markers(vma);
}
/*
* Populate the pgtable underneath for whatever reason if requested.
* When {pte|pmd|...}_alloc() failed we treat it the same way as pgtable
* allocation failures during page faults by kicking OOM and returning
* error.
mm/shmem: allow uffd wr-protect none pte for file-backed mem File-backed memory differs from anonymous memory in that even if the pte is missing, the data could still resides either in the file or in page/swap cache. So when wr-protect a pte, we need to consider none ptes too. We do that by installing the uffd-wp pte markers when necessary. So when there's a future write to the pte, the fault handler will go the special path to first fault-in the page as read-only, then report to userfaultfd server with the wr-protect message. On the other hand, when unprotecting a page, it's also possible that the pte got unmapped but replaced by the special uffd-wp marker. Then we'll need to be able to recover from a uffd-wp pte marker into a none pte, so that the next access to the page will fault in correctly as usual when accessed the next time. Special care needs to be taken throughout the change_protection_range() process. Since now we allow user to wr-protect a none pte, we need to be able to pre-populate the page table entries if we see (!anonymous && MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always skip when the pgtable entry does not exist. For example, the pgtable can be missing for a whole chunk of 2M pmd, but the page cache can exist for the 2M range. When we want to wr-protect one 4K page within the 2M pmd range, we need to pre-populate the pgtable and install the pte marker showing that we want to get a message and block the thread when the page cache of that 4K page is written. Without pre-populating the pmd, change_protection() will simply skip that whole pmd. Note that this patch only covers the small pages (pte level) but not covering any of the transparent huge pages yet. That will be done later, and this patch will be a preparation for it too. Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
*/
#define change_pmd_prepare(vma, pmd, cp_flags) \
({ \
long err = 0; \
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
if (unlikely(pgtable_populate_needed(vma, cp_flags))) { \
if (pte_alloc(vma->vm_mm, pmd)) \
err = -ENOMEM; \
mm/shmem: allow uffd wr-protect none pte for file-backed mem File-backed memory differs from anonymous memory in that even if the pte is missing, the data could still resides either in the file or in page/swap cache. So when wr-protect a pte, we need to consider none ptes too. We do that by installing the uffd-wp pte markers when necessary. So when there's a future write to the pte, the fault handler will go the special path to first fault-in the page as read-only, then report to userfaultfd server with the wr-protect message. On the other hand, when unprotecting a page, it's also possible that the pte got unmapped but replaced by the special uffd-wp marker. Then we'll need to be able to recover from a uffd-wp pte marker into a none pte, so that the next access to the page will fault in correctly as usual when accessed the next time. Special care needs to be taken throughout the change_protection_range() process. Since now we allow user to wr-protect a none pte, we need to be able to pre-populate the page table entries if we see (!anonymous && MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always skip when the pgtable entry does not exist. For example, the pgtable can be missing for a whole chunk of 2M pmd, but the page cache can exist for the 2M range. When we want to wr-protect one 4K page within the 2M pmd range, we need to pre-populate the pgtable and install the pte marker showing that we want to get a message and block the thread when the page cache of that 4K page is written. Without pre-populating the pmd, change_protection() will simply skip that whole pmd. Note that this patch only covers the small pages (pte level) but not covering any of the transparent huge pages yet. That will be done later, and this patch will be a preparation for it too. Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
} \
err; \
})
mm/shmem: allow uffd wr-protect none pte for file-backed mem File-backed memory differs from anonymous memory in that even if the pte is missing, the data could still resides either in the file or in page/swap cache. So when wr-protect a pte, we need to consider none ptes too. We do that by installing the uffd-wp pte markers when necessary. So when there's a future write to the pte, the fault handler will go the special path to first fault-in the page as read-only, then report to userfaultfd server with the wr-protect message. On the other hand, when unprotecting a page, it's also possible that the pte got unmapped but replaced by the special uffd-wp marker. Then we'll need to be able to recover from a uffd-wp pte marker into a none pte, so that the next access to the page will fault in correctly as usual when accessed the next time. Special care needs to be taken throughout the change_protection_range() process. Since now we allow user to wr-protect a none pte, we need to be able to pre-populate the page table entries if we see (!anonymous && MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always skip when the pgtable entry does not exist. For example, the pgtable can be missing for a whole chunk of 2M pmd, but the page cache can exist for the 2M range. When we want to wr-protect one 4K page within the 2M pmd range, we need to pre-populate the pgtable and install the pte marker showing that we want to get a message and block the thread when the page cache of that 4K page is written. Without pre-populating the pmd, change_protection() will simply skip that whole pmd. Note that this patch only covers the small pages (pte level) but not covering any of the transparent huge pages yet. That will be done later, and this patch will be a preparation for it too. Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
/*
* This is the general pud/p4d/pgd version of change_pmd_prepare(). We need to
* have separate change_pmd_prepare() because pte_alloc() returns 0 on success,
* while {pmd|pud|p4d}_alloc() returns the valid pointer on success.
*/
#define change_prepare(vma, high, low, addr, cp_flags) \
({ \
long err = 0; \
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
if (unlikely(pgtable_populate_needed(vma, cp_flags))) { \
mm/shmem: allow uffd wr-protect none pte for file-backed mem File-backed memory differs from anonymous memory in that even if the pte is missing, the data could still resides either in the file or in page/swap cache. So when wr-protect a pte, we need to consider none ptes too. We do that by installing the uffd-wp pte markers when necessary. So when there's a future write to the pte, the fault handler will go the special path to first fault-in the page as read-only, then report to userfaultfd server with the wr-protect message. On the other hand, when unprotecting a page, it's also possible that the pte got unmapped but replaced by the special uffd-wp marker. Then we'll need to be able to recover from a uffd-wp pte marker into a none pte, so that the next access to the page will fault in correctly as usual when accessed the next time. Special care needs to be taken throughout the change_protection_range() process. Since now we allow user to wr-protect a none pte, we need to be able to pre-populate the page table entries if we see (!anonymous && MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always skip when the pgtable entry does not exist. For example, the pgtable can be missing for a whole chunk of 2M pmd, but the page cache can exist for the 2M range. When we want to wr-protect one 4K page within the 2M pmd range, we need to pre-populate the pgtable and install the pte marker showing that we want to get a message and block the thread when the page cache of that 4K page is written. Without pre-populating the pmd, change_protection() will simply skip that whole pmd. Note that this patch only covers the small pages (pte level) but not covering any of the transparent huge pages yet. That will be done later, and this patch will be a preparation for it too. Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
low##_t *p = low##_alloc(vma->vm_mm, high, addr); \
if (p == NULL) \
err = -ENOMEM; \
mm/shmem: allow uffd wr-protect none pte for file-backed mem File-backed memory differs from anonymous memory in that even if the pte is missing, the data could still resides either in the file or in page/swap cache. So when wr-protect a pte, we need to consider none ptes too. We do that by installing the uffd-wp pte markers when necessary. So when there's a future write to the pte, the fault handler will go the special path to first fault-in the page as read-only, then report to userfaultfd server with the wr-protect message. On the other hand, when unprotecting a page, it's also possible that the pte got unmapped but replaced by the special uffd-wp marker. Then we'll need to be able to recover from a uffd-wp pte marker into a none pte, so that the next access to the page will fault in correctly as usual when accessed the next time. Special care needs to be taken throughout the change_protection_range() process. Since now we allow user to wr-protect a none pte, we need to be able to pre-populate the page table entries if we see (!anonymous && MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always skip when the pgtable entry does not exist. For example, the pgtable can be missing for a whole chunk of 2M pmd, but the page cache can exist for the 2M range. When we want to wr-protect one 4K page within the 2M pmd range, we need to pre-populate the pgtable and install the pte marker showing that we want to get a message and block the thread when the page cache of that 4K page is written. Without pre-populating the pmd, change_protection() will simply skip that whole pmd. Note that this patch only covers the small pages (pte level) but not covering any of the transparent huge pages yet. That will be done later, and this patch will be a preparation for it too. Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
} \
err; \
})
mm/shmem: allow uffd wr-protect none pte for file-backed mem File-backed memory differs from anonymous memory in that even if the pte is missing, the data could still resides either in the file or in page/swap cache. So when wr-protect a pte, we need to consider none ptes too. We do that by installing the uffd-wp pte markers when necessary. So when there's a future write to the pte, the fault handler will go the special path to first fault-in the page as read-only, then report to userfaultfd server with the wr-protect message. On the other hand, when unprotecting a page, it's also possible that the pte got unmapped but replaced by the special uffd-wp marker. Then we'll need to be able to recover from a uffd-wp pte marker into a none pte, so that the next access to the page will fault in correctly as usual when accessed the next time. Special care needs to be taken throughout the change_protection_range() process. Since now we allow user to wr-protect a none pte, we need to be able to pre-populate the page table entries if we see (!anonymous && MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always skip when the pgtable entry does not exist. For example, the pgtable can be missing for a whole chunk of 2M pmd, but the page cache can exist for the 2M range. When we want to wr-protect one 4K page within the 2M pmd range, we need to pre-populate the pgtable and install the pte marker showing that we want to get a message and block the thread when the page cache of that 4K page is written. Without pre-populating the pmd, change_protection() will simply skip that whole pmd. Note that this patch only covers the small pages (pte level) but not covering any of the transparent huge pages yet. That will be done later, and this patch will be a preparation for it too. Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
static inline long change_pmd_range(struct mmu_gather *tlb,
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
struct vm_area_struct *vma, pud_t *pud, unsigned long addr,
unsigned long end, pgprot_t newprot, unsigned long cp_flags)
{
pmd_t *pmd;
unsigned long next;
long pages = 0;
mm: numa: return the number of base pages altered by protection changes Commit 0255d4918480 ("mm: Account for a THP NUMA hinting update as one PTE update") was added to account for the number of PTE updates when marking pages prot_numa. task_numa_work was using the old return value to track how much address space had been updated. Altering the return value causes the scanner to do more work than it is configured or documented to in a single unit of work. This patch reverts that commit and accounts for the number of THP updates separately in vmstat. It is up to the administrator to interpret the pair of values correctly. This is a straight-forward operation and likely to only be of interest when actively debugging NUMA balancing problems. The impact of this patch is that the NUMA PTE scanner will scan slower when THP is enabled and workloads may converge slower as a result. On the flip size system CPU usage should be lower than recent tests reported. This is an illustrative example of a short single JVM specjbb test specjbb 3.12.0 3.12.0 vanilla acctupdates TPut 1 26143.00 ( 0.00%) 25747.00 ( -1.51%) TPut 7 185257.00 ( 0.00%) 183202.00 ( -1.11%) TPut 13 329760.00 ( 0.00%) 346577.00 ( 5.10%) TPut 19 442502.00 ( 0.00%) 460146.00 ( 3.99%) TPut 25 540634.00 ( 0.00%) 549053.00 ( 1.56%) TPut 31 512098.00 ( 0.00%) 519611.00 ( 1.47%) TPut 37 461276.00 ( 0.00%) 474973.00 ( 2.97%) TPut 43 403089.00 ( 0.00%) 414172.00 ( 2.75%) 3.12.0 3.12.0 vanillaacctupdates User 5169.64 5184.14 System 100.45 80.02 Elapsed 252.75 251.85 Performance is similar but note the reduction in system CPU time. While this showed a performance gain, it will not be universal but at least it'll be behaving as documented. The vmstats are obviously different but here is an obvious interpretation of them from mmtests. 3.12.0 3.12.0 vanillaacctupdates NUMA page range updates 1408326 11043064 NUMA huge PMD updates 0 21040 NUMA PTE updates 1408326 291624 "NUMA page range updates" == nr_pte_updates and is the value returned to the NUMA pte scanner. NUMA huge PMD updates were the number of THP updates which in combination can be used to calculate how many ptes were updated from userspace. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Alex Thorlton <athorlton@sgi.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:08:32 +00:00
unsigned long nr_huge_updates = 0;
struct mmu_notifier_range range;
range.start = 0;
pmd = pmd_offset(pud, addr);
do {
long ret;
mm/mprotect: delete pmd_none_or_clear_bad_unless_trans_huge() change_pmd_range() had special pmd_none_or_clear_bad_unless_trans_huge(), required to avoid "bad" choices when setting automatic NUMA hinting under mmap_read_lock(); but most of that is already covered in pte_offset_map() now. change_pmd_range() just wants a pmd_none() check before wasting time on MMU notifiers, then checks on the read-once _pmd value to work out what's needed for huge cases. If change_pte_range() returns -EAGAIN to retry if pte_offset_map_lock() fails, nothing more special is needed. Link: https://lkml.kernel.org/r/725a42a9-91e9-c868-925-e3a5fd40bb4f@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:30:48 +00:00
pmd_t _pmd;
again:
next = pmd_addr_end(addr, end);
mm, numa: fix bad pmd by atomically check for pmd_trans_huge when marking page tables prot_numa : A user reported a bug against a distribution kernel while running a : proprietary workload described as "memory intensive that is not swapping" : that is expected to apply to mainline kernels. The workload is : read/write/modifying ranges of memory and checking the contents. They : reported that within a few hours that a bad PMD would be reported followed : by a memory corruption where expected data was all zeros. A partial : report of the bad PMD looked like : : [ 5195.338482] ../mm/pgtable-generic.c:33: bad pmd ffff8888157ba008(000002e0396009e2) : [ 5195.341184] ------------[ cut here ]------------ : [ 5195.356880] kernel BUG at ../mm/pgtable-generic.c:35! : .... : [ 5195.410033] Call Trace: : [ 5195.410471] [<ffffffff811bc75d>] change_protection_range+0x7dd/0x930 : [ 5195.410716] [<ffffffff811d4be8>] change_prot_numa+0x18/0x30 : [ 5195.410918] [<ffffffff810adefe>] task_numa_work+0x1fe/0x310 : [ 5195.411200] [<ffffffff81098322>] task_work_run+0x72/0x90 : [ 5195.411246] [<ffffffff81077139>] exit_to_usermode_loop+0x91/0xc2 : [ 5195.411494] [<ffffffff81003a51>] prepare_exit_to_usermode+0x31/0x40 : [ 5195.411739] [<ffffffff815e56af>] retint_user+0x8/0x10 : : Decoding revealed that the PMD was a valid prot_numa PMD and the bad PMD : was a false detection. The bug does not trigger if automatic NUMA : balancing or transparent huge pages is disabled. : : The bug is due a race in change_pmd_range between a pmd_trans_huge and : pmd_nond_or_clear_bad check without any locks held. During the : pmd_trans_huge check, a parallel protection update under lock can have : cleared the PMD and filled it with a prot_numa entry between the transhuge : check and the pmd_none_or_clear_bad check. : : While this could be fixed with heavy locking, it's only necessary to make : a copy of the PMD on the stack during change_pmd_range and avoid races. A : new helper is created for this as the check if quite subtle and the : existing similar helpful is not suitable. This passed 154 hours of : testing (usually triggers between 20 minutes and 24 hours) without : detecting bad PMDs or corruption. A basic test of an autonuma-intensive : workload showed no significant change in behaviour. Although Mel withdrew the patch on the face of LKML comment https://lkml.org/lkml/2017/4/10/922 the race window aforementioned is still open, and we have reports of Linpack test reporting bad residuals after the bad PMD warning is observed. In addition to that, bad rss-counter and non-zero pgtables assertions are triggered on mm teardown for the task hitting the bad PMD. host kernel: mm/pgtable-generic.c:40: bad pmd 00000000b3152f68(8000000d2d2008e7) .... host kernel: BUG: Bad rss-counter state mm:00000000b583043d idx:1 val:512 host kernel: BUG: non-zero pgtables_bytes on freeing mm: 4096 The issue is observed on a v4.18-based distribution kernel, but the race window is expected to be applicable to mainline kernels, as well. [akpm@linux-foundation.org: fix comment typo, per Rafael] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rafael Aquini <aquini@redhat.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Link: http://lkml.kernel.org/r/20200216191800.22423-1-aquini@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-06 06:28:26 +00:00
ret = change_pmd_prepare(vma, pmd, cp_flags);
if (ret) {
pages = ret;
break;
}
mm/mprotect: delete pmd_none_or_clear_bad_unless_trans_huge() change_pmd_range() had special pmd_none_or_clear_bad_unless_trans_huge(), required to avoid "bad" choices when setting automatic NUMA hinting under mmap_read_lock(); but most of that is already covered in pte_offset_map() now. change_pmd_range() just wants a pmd_none() check before wasting time on MMU notifiers, then checks on the read-once _pmd value to work out what's needed for huge cases. If change_pte_range() returns -EAGAIN to retry if pte_offset_map_lock() fails, nothing more special is needed. Link: https://lkml.kernel.org/r/725a42a9-91e9-c868-925-e3a5fd40bb4f@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:30:48 +00:00
if (pmd_none(*pmd))
mm/mprotect: add a cond_resched() inside change_pmd_range() While testing on a large CPU system, detected the following RCU stall many times over the span of the workload. This problem is solved by adding a cond_resched() in the change_pmd_range() function. INFO: rcu_sched detected stalls on CPUs/tasks: 154-....: (670 ticks this GP) idle=022/140000000000000/0 softirq=2825/2825 fqs=612 (detected by 955, t=6002 jiffies, g=4486, c=4485, q=90864) Sending NMI from CPU 955 to CPUs 154: NMI backtrace for cpu 154 CPU: 154 PID: 147071 Comm: workload Not tainted 4.15.0-rc3+ #3 NIP: c0000000000b3f64 LR: c0000000000b33d4 CTR: 000000000000aa18 REGS: 00000000a4b0fb44 TRAP: 0501 Not tainted (4.15.0-rc3+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22422082 XER: 00000000 CFAR: 00000000006cf8f0 SOFTE: 1 GPR00: 0010000000000000 c00003ef9b1cb8c0 c0000000010cc600 0000000000000000 GPR04: 8e0000018c32b200 40017b3858fd6e00 8e0000018c32b208 40017b3858fd6e00 GPR08: 8e0000018c32b210 40017b3858fd6e00 8e0000018c32b218 40017b3858fd6e00 GPR12: ffffffffffffffff c00000000fb25100 NIP [c0000000000b3f64] plpar_hcall9+0x44/0x7c LR [c0000000000b33d4] pSeries_lpar_flush_hash_range+0x384/0x420 Call Trace: flush_hash_range+0x48/0x100 __flush_tlb_pending+0x44/0xd0 hpte_need_flush+0x408/0x470 change_protection_range+0xaac/0xf10 change_prot_numa+0x30/0xb0 task_numa_work+0x2d0/0x3e0 task_work_run+0x130/0x190 do_notify_resume+0x118/0x120 ret_from_except_lite+0x70/0x74 Instruction dump: 60000000 f8810028 7ca42b78 7cc53378 7ce63b78 7d074378 7d284b78 7d495378 e9410060 e9610068 e9810070 44000022 <7d806378> e9810028 f88c0000 f8ac0008 Link: http://lkml.kernel.org/r/20171214140551.5794-1-khandual@linux.vnet.ibm.com Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Suggested-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-05 00:17:52 +00:00
goto next;
/* invoke the mmu notifier if the pmd is populated */
if (!range.start) {
mmu_notifier_range_init(&range,
MMU_NOTIFY_PROTECTION_VMA, 0,
vma->vm_mm, addr, end);
mmu_notifier_invalidate_range_start(&range);
}
mm/mprotect: delete pmd_none_or_clear_bad_unless_trans_huge() change_pmd_range() had special pmd_none_or_clear_bad_unless_trans_huge(), required to avoid "bad" choices when setting automatic NUMA hinting under mmap_read_lock(); but most of that is already covered in pte_offset_map() now. change_pmd_range() just wants a pmd_none() check before wasting time on MMU notifiers, then checks on the read-once _pmd value to work out what's needed for huge cases. If change_pte_range() returns -EAGAIN to retry if pte_offset_map_lock() fails, nothing more special is needed. Link: https://lkml.kernel.org/r/725a42a9-91e9-c868-925-e3a5fd40bb4f@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:30:48 +00:00
_pmd = pmdp_get_lockless(pmd);
if (is_swap_pmd(_pmd) || pmd_trans_huge(_pmd) || pmd_devmap(_pmd)) {
mm/shmem: allows file-back mem to be uffd wr-protected on thps We don't have "huge" version of pte markers, instead when necessary we split the thp. However split the thp is not enough, because file-backed thp is handled totally differently comparing to anonymous thps: rather than doing a real split, the thp pmd will simply got cleared in __split_huge_pmd_locked(). That is not enough if e.g. when there is a thp covers range [0, 2M) but we want to wr-protect small page resides in [4K, 8K) range, because after __split_huge_pmd() returns, there will be a none pmd, and change_pmd_range() will just skip it right after the split. Here we leverage the previously introduced change_pmd_prepare() macro so that we'll populate the pmd with a pgtable page after the pmd split (in which process the pmd will be cleared for cases like shmem). Then change_pte_range() will do all the rest for us by installing the uffd-wp pte marker at any none pte that we'd like to wr-protect. Link: https://lkml.kernel.org/r/20220405014852.14413-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
if ((next - addr != HPAGE_PMD_SIZE) ||
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
pgtable_split_needed(vma, cp_flags)) {
__split_huge_pmd(vma, pmd, addr, false, NULL);
mm/shmem: allows file-back mem to be uffd wr-protected on thps We don't have "huge" version of pte markers, instead when necessary we split the thp. However split the thp is not enough, because file-backed thp is handled totally differently comparing to anonymous thps: rather than doing a real split, the thp pmd will simply got cleared in __split_huge_pmd_locked(). That is not enough if e.g. when there is a thp covers range [0, 2M) but we want to wr-protect small page resides in [4K, 8K) range, because after __split_huge_pmd() returns, there will be a none pmd, and change_pmd_range() will just skip it right after the split. Here we leverage the previously introduced change_pmd_prepare() macro so that we'll populate the pmd with a pgtable page after the pmd split (in which process the pmd will be cleared for cases like shmem). Then change_pte_range() will do all the rest for us by installing the uffd-wp pte marker at any none pte that we'd like to wr-protect. Link: https://lkml.kernel.org/r/20220405014852.14413-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
/*
* For file-backed, the pmd could have been
* cleared; make sure pmd populated if
* necessary, then fall-through to pte level.
*/
ret = change_pmd_prepare(vma, pmd, cp_flags);
if (ret) {
pages = ret;
break;
}
} else {
mm/mprotect: delete pmd_none_or_clear_bad_unless_trans_huge() change_pmd_range() had special pmd_none_or_clear_bad_unless_trans_huge(), required to avoid "bad" choices when setting automatic NUMA hinting under mmap_read_lock(); but most of that is already covered in pte_offset_map() now. change_pmd_range() just wants a pmd_none() check before wasting time on MMU notifiers, then checks on the read-once _pmd value to work out what's needed for huge cases. If change_pte_range() returns -EAGAIN to retry if pte_offset_map_lock() fails, nothing more special is needed. Link: https://lkml.kernel.org/r/725a42a9-91e9-c868-925-e3a5fd40bb4f@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:30:48 +00:00
ret = change_huge_pmd(tlb, vma, pmd,
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
addr, newprot, cp_flags);
mm/mprotect: delete pmd_none_or_clear_bad_unless_trans_huge() change_pmd_range() had special pmd_none_or_clear_bad_unless_trans_huge(), required to avoid "bad" choices when setting automatic NUMA hinting under mmap_read_lock(); but most of that is already covered in pte_offset_map() now. change_pmd_range() just wants a pmd_none() check before wasting time on MMU notifiers, then checks on the read-once _pmd value to work out what's needed for huge cases. If change_pte_range() returns -EAGAIN to retry if pte_offset_map_lock() fails, nothing more special is needed. Link: https://lkml.kernel.org/r/725a42a9-91e9-c868-925-e3a5fd40bb4f@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:30:48 +00:00
if (ret) {
if (ret == HPAGE_PMD_NR) {
mm: numa: return the number of base pages altered by protection changes Commit 0255d4918480 ("mm: Account for a THP NUMA hinting update as one PTE update") was added to account for the number of PTE updates when marking pages prot_numa. task_numa_work was using the old return value to track how much address space had been updated. Altering the return value causes the scanner to do more work than it is configured or documented to in a single unit of work. This patch reverts that commit and accounts for the number of THP updates separately in vmstat. It is up to the administrator to interpret the pair of values correctly. This is a straight-forward operation and likely to only be of interest when actively debugging NUMA balancing problems. The impact of this patch is that the NUMA PTE scanner will scan slower when THP is enabled and workloads may converge slower as a result. On the flip size system CPU usage should be lower than recent tests reported. This is an illustrative example of a short single JVM specjbb test specjbb 3.12.0 3.12.0 vanilla acctupdates TPut 1 26143.00 ( 0.00%) 25747.00 ( -1.51%) TPut 7 185257.00 ( 0.00%) 183202.00 ( -1.11%) TPut 13 329760.00 ( 0.00%) 346577.00 ( 5.10%) TPut 19 442502.00 ( 0.00%) 460146.00 ( 3.99%) TPut 25 540634.00 ( 0.00%) 549053.00 ( 1.56%) TPut 31 512098.00 ( 0.00%) 519611.00 ( 1.47%) TPut 37 461276.00 ( 0.00%) 474973.00 ( 2.97%) TPut 43 403089.00 ( 0.00%) 414172.00 ( 2.75%) 3.12.0 3.12.0 vanillaacctupdates User 5169.64 5184.14 System 100.45 80.02 Elapsed 252.75 251.85 Performance is similar but note the reduction in system CPU time. While this showed a performance gain, it will not be universal but at least it'll be behaving as documented. The vmstats are obviously different but here is an obvious interpretation of them from mmtests. 3.12.0 3.12.0 vanillaacctupdates NUMA page range updates 1408326 11043064 NUMA huge PMD updates 0 21040 NUMA PTE updates 1408326 291624 "NUMA page range updates" == nr_pte_updates and is the value returned to the NUMA pte scanner. NUMA huge PMD updates were the number of THP updates which in combination can be used to calculate how many ptes were updated from userspace. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Alex Thorlton <athorlton@sgi.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:08:32 +00:00
pages += HPAGE_PMD_NR;
nr_huge_updates++;
}
mm: numa: recheck for transhuge pages under lock during protection changes Sasha reported the following bug using trinity kernel BUG at mm/mprotect.c:149! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 20 PID: 26219 Comm: trinity-c216 Tainted: G W 3.14.0-rc5-next-20140305-sasha-00011-ge06f5f3-dirty #105 task: ffff8800b6c80000 ti: ffff880228436000 task.ti: ffff880228436000 RIP: change_protection_range+0x3b3/0x500 Call Trace: change_protection+0x25/0x30 change_prot_numa+0x1b/0x30 task_numa_work+0x279/0x360 task_work_run+0xae/0xf0 do_notify_resume+0x8e/0xe0 retint_signal+0x4d/0x92 The VM_BUG_ON was added in -mm by the patch "mm,numa: reorganize change_pmd_range". The race existed without the patch but was just harder to hit. The problem is that a transhuge check is made without holding the PTL. It's possible at the time of the check that a parallel fault clears the pmd and inserts a new one which then triggers the VM_BUG_ON check. This patch removes the VM_BUG_ON but fixes the race by rechecking transhuge under the PTL when marking page tables for NUMA hinting and bailing if a race occurred. It is not a problem for calls to mprotect() as they hold mmap_sem for write. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Sasha Levin <sasha.levin@oracle.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:36:56 +00:00
/* huge pmd was handled */
mm/mprotect: add a cond_resched() inside change_pmd_range() While testing on a large CPU system, detected the following RCU stall many times over the span of the workload. This problem is solved by adding a cond_resched() in the change_pmd_range() function. INFO: rcu_sched detected stalls on CPUs/tasks: 154-....: (670 ticks this GP) idle=022/140000000000000/0 softirq=2825/2825 fqs=612 (detected by 955, t=6002 jiffies, g=4486, c=4485, q=90864) Sending NMI from CPU 955 to CPUs 154: NMI backtrace for cpu 154 CPU: 154 PID: 147071 Comm: workload Not tainted 4.15.0-rc3+ #3 NIP: c0000000000b3f64 LR: c0000000000b33d4 CTR: 000000000000aa18 REGS: 00000000a4b0fb44 TRAP: 0501 Not tainted (4.15.0-rc3+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22422082 XER: 00000000 CFAR: 00000000006cf8f0 SOFTE: 1 GPR00: 0010000000000000 c00003ef9b1cb8c0 c0000000010cc600 0000000000000000 GPR04: 8e0000018c32b200 40017b3858fd6e00 8e0000018c32b208 40017b3858fd6e00 GPR08: 8e0000018c32b210 40017b3858fd6e00 8e0000018c32b218 40017b3858fd6e00 GPR12: ffffffffffffffff c00000000fb25100 NIP [c0000000000b3f64] plpar_hcall9+0x44/0x7c LR [c0000000000b33d4] pSeries_lpar_flush_hash_range+0x384/0x420 Call Trace: flush_hash_range+0x48/0x100 __flush_tlb_pending+0x44/0xd0 hpte_need_flush+0x408/0x470 change_protection_range+0xaac/0xf10 change_prot_numa+0x30/0xb0 task_numa_work+0x2d0/0x3e0 task_work_run+0x130/0x190 do_notify_resume+0x118/0x120 ret_from_except_lite+0x70/0x74 Instruction dump: 60000000 f8810028 7ca42b78 7cc53378 7ce63b78 7d074378 7d284b78 7d495378 e9410060 e9610068 e9810070 44000022 <7d806378> e9810028 f88c0000 f8ac0008 Link: http://lkml.kernel.org/r/20171214140551.5794-1-khandual@linux.vnet.ibm.com Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Suggested-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-05 00:17:52 +00:00
goto next;
}
}
/* fall through, the trans huge pmd just split */
}
mm/mprotect: delete pmd_none_or_clear_bad_unless_trans_huge() change_pmd_range() had special pmd_none_or_clear_bad_unless_trans_huge(), required to avoid "bad" choices when setting automatic NUMA hinting under mmap_read_lock(); but most of that is already covered in pte_offset_map() now. change_pmd_range() just wants a pmd_none() check before wasting time on MMU notifiers, then checks on the read-once _pmd value to work out what's needed for huge cases. If change_pte_range() returns -EAGAIN to retry if pte_offset_map_lock() fails, nothing more special is needed. Link: https://lkml.kernel.org/r/725a42a9-91e9-c868-925-e3a5fd40bb4f@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:30:48 +00:00
ret = change_pte_range(tlb, vma, pmd, addr, next, newprot,
cp_flags);
if (ret < 0)
goto again;
pages += ret;
mm/mprotect: add a cond_resched() inside change_pmd_range() While testing on a large CPU system, detected the following RCU stall many times over the span of the workload. This problem is solved by adding a cond_resched() in the change_pmd_range() function. INFO: rcu_sched detected stalls on CPUs/tasks: 154-....: (670 ticks this GP) idle=022/140000000000000/0 softirq=2825/2825 fqs=612 (detected by 955, t=6002 jiffies, g=4486, c=4485, q=90864) Sending NMI from CPU 955 to CPUs 154: NMI backtrace for cpu 154 CPU: 154 PID: 147071 Comm: workload Not tainted 4.15.0-rc3+ #3 NIP: c0000000000b3f64 LR: c0000000000b33d4 CTR: 000000000000aa18 REGS: 00000000a4b0fb44 TRAP: 0501 Not tainted (4.15.0-rc3+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22422082 XER: 00000000 CFAR: 00000000006cf8f0 SOFTE: 1 GPR00: 0010000000000000 c00003ef9b1cb8c0 c0000000010cc600 0000000000000000 GPR04: 8e0000018c32b200 40017b3858fd6e00 8e0000018c32b208 40017b3858fd6e00 GPR08: 8e0000018c32b210 40017b3858fd6e00 8e0000018c32b218 40017b3858fd6e00 GPR12: ffffffffffffffff c00000000fb25100 NIP [c0000000000b3f64] plpar_hcall9+0x44/0x7c LR [c0000000000b33d4] pSeries_lpar_flush_hash_range+0x384/0x420 Call Trace: flush_hash_range+0x48/0x100 __flush_tlb_pending+0x44/0xd0 hpte_need_flush+0x408/0x470 change_protection_range+0xaac/0xf10 change_prot_numa+0x30/0xb0 task_numa_work+0x2d0/0x3e0 task_work_run+0x130/0x190 do_notify_resume+0x118/0x120 ret_from_except_lite+0x70/0x74 Instruction dump: 60000000 f8810028 7ca42b78 7cc53378 7ce63b78 7d074378 7d284b78 7d495378 e9410060 e9610068 e9810070 44000022 <7d806378> e9810028 f88c0000 f8ac0008 Link: http://lkml.kernel.org/r/20171214140551.5794-1-khandual@linux.vnet.ibm.com Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Suggested-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-05 00:17:52 +00:00
next:
cond_resched();
} while (pmd++, addr = next, addr != end);
if (range.start)
mmu_notifier_invalidate_range_end(&range);
mm: numa: return the number of base pages altered by protection changes Commit 0255d4918480 ("mm: Account for a THP NUMA hinting update as one PTE update") was added to account for the number of PTE updates when marking pages prot_numa. task_numa_work was using the old return value to track how much address space had been updated. Altering the return value causes the scanner to do more work than it is configured or documented to in a single unit of work. This patch reverts that commit and accounts for the number of THP updates separately in vmstat. It is up to the administrator to interpret the pair of values correctly. This is a straight-forward operation and likely to only be of interest when actively debugging NUMA balancing problems. The impact of this patch is that the NUMA PTE scanner will scan slower when THP is enabled and workloads may converge slower as a result. On the flip size system CPU usage should be lower than recent tests reported. This is an illustrative example of a short single JVM specjbb test specjbb 3.12.0 3.12.0 vanilla acctupdates TPut 1 26143.00 ( 0.00%) 25747.00 ( -1.51%) TPut 7 185257.00 ( 0.00%) 183202.00 ( -1.11%) TPut 13 329760.00 ( 0.00%) 346577.00 ( 5.10%) TPut 19 442502.00 ( 0.00%) 460146.00 ( 3.99%) TPut 25 540634.00 ( 0.00%) 549053.00 ( 1.56%) TPut 31 512098.00 ( 0.00%) 519611.00 ( 1.47%) TPut 37 461276.00 ( 0.00%) 474973.00 ( 2.97%) TPut 43 403089.00 ( 0.00%) 414172.00 ( 2.75%) 3.12.0 3.12.0 vanillaacctupdates User 5169.64 5184.14 System 100.45 80.02 Elapsed 252.75 251.85 Performance is similar but note the reduction in system CPU time. While this showed a performance gain, it will not be universal but at least it'll be behaving as documented. The vmstats are obviously different but here is an obvious interpretation of them from mmtests. 3.12.0 3.12.0 vanillaacctupdates NUMA page range updates 1408326 11043064 NUMA huge PMD updates 0 21040 NUMA PTE updates 1408326 291624 "NUMA page range updates" == nr_pte_updates and is the value returned to the NUMA pte scanner. NUMA huge PMD updates were the number of THP updates which in combination can be used to calculate how many ptes were updated from userspace. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Alex Thorlton <athorlton@sgi.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:08:32 +00:00
if (nr_huge_updates)
count_vm_numa_events(NUMA_HUGE_PTE_UPDATES, nr_huge_updates);
return pages;
}
static inline long change_pud_range(struct mmu_gather *tlb,
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
struct vm_area_struct *vma, p4d_t *p4d, unsigned long addr,
unsigned long end, pgprot_t newprot, unsigned long cp_flags)
{
pud_t *pud;
unsigned long next;
long pages = 0, ret;
pud = pud_offset(p4d, addr);
do {
next = pud_addr_end(addr, end);
ret = change_prepare(vma, pud, pmd, addr, cp_flags);
if (ret)
return ret;
if (pud_none_or_clear_bad(pud))
continue;
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
pages += change_pmd_range(tlb, vma, pud, addr, next, newprot,
mm: merge parameters for change_protection() change_protection() was used by either the NUMA or mprotect() code, there's one parameter for each of the callers (dirty_accountable and prot_numa). Further, these parameters are passed along the calls: - change_protection_range() - change_p4d_range() - change_pud_range() - change_pmd_range() - ... Now we introduce a flag for change_protect() and all these helpers to replace these parameters. Then we can avoid passing multiple parameters multiple times along the way. More importantly, it'll greatly simplify the work if we want to introduce any new parameters to change_protection(). In the follow up patches, a new parameter for userfaultfd write protection will be introduced. No functional change at all. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-7-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:05:45 +00:00
cp_flags);
} while (pud++, addr = next, addr != end);
return pages;
}
static inline long change_p4d_range(struct mmu_gather *tlb,
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
struct vm_area_struct *vma, pgd_t *pgd, unsigned long addr,
unsigned long end, pgprot_t newprot, unsigned long cp_flags)
{
p4d_t *p4d;
unsigned long next;
long pages = 0, ret;
p4d = p4d_offset(pgd, addr);
do {
next = p4d_addr_end(addr, end);
ret = change_prepare(vma, p4d, pud, addr, cp_flags);
if (ret)
return ret;
if (p4d_none_or_clear_bad(p4d))
continue;
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
pages += change_pud_range(tlb, vma, p4d, addr, next, newprot,
mm: merge parameters for change_protection() change_protection() was used by either the NUMA or mprotect() code, there's one parameter for each of the callers (dirty_accountable and prot_numa). Further, these parameters are passed along the calls: - change_protection_range() - change_p4d_range() - change_pud_range() - change_pmd_range() - ... Now we introduce a flag for change_protect() and all these helpers to replace these parameters. Then we can avoid passing multiple parameters multiple times along the way. More importantly, it'll greatly simplify the work if we want to introduce any new parameters to change_protection(). In the follow up patches, a new parameter for userfaultfd write protection will be introduced. No functional change at all. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-7-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:05:45 +00:00
cp_flags);
} while (p4d++, addr = next, addr != end);
return pages;
}
static long change_protection_range(struct mmu_gather *tlb,
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
struct vm_area_struct *vma, unsigned long addr,
unsigned long end, pgprot_t newprot, unsigned long cp_flags)
{
struct mm_struct *mm = vma->vm_mm;
pgd_t *pgd;
unsigned long next;
long pages = 0, ret;
BUG_ON(addr >= end);
pgd = pgd_offset(mm, addr);
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
tlb_start_vma(tlb, vma);
do {
next = pgd_addr_end(addr, end);
ret = change_prepare(vma, pgd, p4d, addr, cp_flags);
if (ret) {
pages = ret;
break;
}
if (pgd_none_or_clear_bad(pgd))
continue;
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
pages += change_p4d_range(tlb, vma, pgd, addr, next, newprot,
mm: merge parameters for change_protection() change_protection() was used by either the NUMA or mprotect() code, there's one parameter for each of the callers (dirty_accountable and prot_numa). Further, these parameters are passed along the calls: - change_protection_range() - change_p4d_range() - change_pud_range() - change_pmd_range() - ... Now we introduce a flag for change_protect() and all these helpers to replace these parameters. Then we can avoid passing multiple parameters multiple times along the way. More importantly, it'll greatly simplify the work if we want to introduce any new parameters to change_protection(). In the follow up patches, a new parameter for userfaultfd write protection will be introduced. No functional change at all. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-7-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:05:45 +00:00
cp_flags);
} while (pgd++, addr = next, addr != end);
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
tlb_end_vma(tlb, vma);
return pages;
}
long change_protection(struct mmu_gather *tlb,
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
struct vm_area_struct *vma, unsigned long start,
unsigned long end, unsigned long cp_flags)
{
pgprot_t newprot = vma->vm_page_prot;
long pages;
userfaultfd: wp: apply _PAGE_UFFD_WP bit Firstly, introduce two new flags MM_CP_UFFD_WP[_RESOLVE] for change_protection() when used with uffd-wp and make sure the two new flags are exclusively used. Then, - For MM_CP_UFFD_WP: apply the _PAGE_UFFD_WP bit and remove _PAGE_RW when a range of memory is write protected by uffd - For MM_CP_UFFD_WP_RESOLVE: remove the _PAGE_UFFD_WP bit and recover _PAGE_RW when write protection is resolved from userspace And use this new interface in mwriteprotect_range() to replace the old MM_CP_DIRTY_ACCT. Do this change for both PTEs and huge PMDs. Then we can start to identify which PTE/PMD is write protected by general (e.g., COW or soft dirty tracking), and which is for userfaultfd-wp. Since we should keep the _PAGE_UFFD_WP when doing pte_modify(), add it into _PAGE_CHG_MASK as well. Meanwhile, since we have this new bit, we can be even more strict when detecting uffd-wp page faults in either do_wp_page() or wp_huge_pmd(). After we're with _PAGE_UFFD_WP, a special case is when a page is both protected by the general COW logic and also userfault-wp. Here the userfault-wp will have higher priority and will be handled first. Only after the uffd-wp bit is cleared on the PTE/PMD will we continue to handle the general COW. These are the steps on what will happen with such a page: 1. CPU accesses write protected shared page (so both protected by general COW and uffd-wp), blocked by uffd-wp first because in do_wp_page we'll handle uffd-wp first, so it has higher priority than general COW. 2. Uffd service thread receives the request, do UFFDIO_WRITEPROTECT to remove the uffd-wp bit upon the PTE/PMD. However here we still keep the write bit cleared. Notify the blocked CPU. 3. The blocked CPU resumes the page fault process with a fault retry, during retry it'll notice it was not with the uffd-wp bit this time but it is still write protected by general COW, then it'll go though the COW path in the fault handler, copy the page, apply write bit where necessary, and retry again. 4. The CPU will be able to access this page with write bit set. Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Martin Cracauer <cracauer@cons.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-8-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:05:49 +00:00
BUG_ON((cp_flags & MM_CP_UFFD_WP_ALL) == MM_CP_UFFD_WP_ALL);
#ifdef CONFIG_NUMA_BALANCING
/*
* Ordinary protection updates (mprotect, uffd-wp, softdirty tracking)
* are expected to reflect their requirements via VMA flags such that
* vma_set_page_prot() will adjust vma->vm_page_prot accordingly.
*/
if (cp_flags & MM_CP_PROT_NUMA)
newprot = PAGE_NONE;
#else
WARN_ON_ONCE(cp_flags & MM_CP_PROT_NUMA);
#endif
if (is_vm_hugetlb_page(vma))
pages = hugetlb_change_protection(vma, start, end, newprot,
cp_flags);
else
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
pages = change_protection_range(tlb, vma, start, end, newprot,
mm: merge parameters for change_protection() change_protection() was used by either the NUMA or mprotect() code, there's one parameter for each of the callers (dirty_accountable and prot_numa). Further, these parameters are passed along the calls: - change_protection_range() - change_p4d_range() - change_pud_range() - change_pmd_range() - ... Now we introduce a flag for change_protect() and all these helpers to replace these parameters. Then we can avoid passing multiple parameters multiple times along the way. More importantly, it'll greatly simplify the work if we want to introduce any new parameters to change_protection(). In the follow up patches, a new parameter for userfaultfd write protection will be introduced. No functional change at all. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-7-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:05:45 +00:00
cp_flags);
return pages;
}
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
static int prot_none_pte_entry(pte_t *pte, unsigned long addr,
unsigned long next, struct mm_walk *walk)
{
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
return pfn_modify_allowed(pte_pfn(ptep_get(pte)),
*(pgprot_t *)(walk->private)) ?
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
0 : -EACCES;
}
static int prot_none_hugetlb_entry(pte_t *pte, unsigned long hmask,
unsigned long addr, unsigned long next,
struct mm_walk *walk)
{
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
return pfn_modify_allowed(pte_pfn(ptep_get(pte)),
*(pgprot_t *)(walk->private)) ?
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
0 : -EACCES;
}
static int prot_none_test(unsigned long addr, unsigned long next,
struct mm_walk *walk)
{
return 0;
}
static const struct mm_walk_ops prot_none_walk_ops = {
.pte_entry = prot_none_pte_entry,
.hugetlb_entry = prot_none_hugetlb_entry,
.test_walk = prot_none_test,
mm: enable page walking API to lock vmas during the walk walk_page_range() and friends often operate under write-locked mmap_lock. With introduction of vma locks, the vmas have to be locked as well during such walks to prevent concurrent page faults in these areas. Add an additional member to mm_walk_ops to indicate locking requirements for the walk. The change ensures that page walks which prevent concurrent page faults by write-locking mmap_lock, operate correctly after introduction of per-vma locks. With per-vma locks page faults can be handled under vma lock without taking mmap_lock at all, so write locking mmap_lock would not stop them. The change ensures vmas are properly locked during such walks. A sample issue this solves is do_mbind() performing queue_pages_range() to queue pages for migration. Without this change a concurrent page can be faulted into the area and be left out of migration. Link: https://lkml.kernel.org/r/20230804152724.3090321-2-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Suggested-by: Jann Horn <jannh@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Michel Lespinasse <michel@lespinasse.org> Cc: Peter Xu <peterx@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-04 15:27:19 +00:00
.walk_lock = PGWALK_WRLOCK,
};
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
int
mprotect_fixup(struct vma_iterator *vmi, struct mmu_gather *tlb,
struct vm_area_struct *vma, struct vm_area_struct **pprev,
unsigned long start, unsigned long end, unsigned long newflags)
{
struct mm_struct *mm = vma->vm_mm;
unsigned long oldflags = vma->vm_flags;
long nrpages = (end - start) >> PAGE_SHIFT;
unsigned int mm_cp_flags = 0;
unsigned long charged = 0;
pgoff_t pgoff;
int error;
if (newflags == oldflags) {
*pprev = vma;
return 0;
}
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
/*
* Do PROT_NONE PFN permission checks here when we can still
* bail out without undoing a lot of state. This is a rather
* uncommon case, so doesn't need to be very optimized.
*/
if (arch_has_pfn_modify_check() &&
(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP)) &&
(newflags & VM_ACCESS_FLAGS) == 0) {
pgprot_t new_pgprot = vm_get_page_prot(newflags);
error = walk_page_range(current->mm, start, end,
&prot_none_walk_ops, &new_pgprot);
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
if (error)
return error;
}
/*
* If we make a private mapping writable we increase our commit;
* but (without finer accounting) cannot reduce our commit if we
Do not account for the address space used by hugetlbfs using VM_ACCOUNT When overcommit is disabled, the core VM accounts for pages used by anonymous shared, private mappings and special mappings. It keeps track of VMAs that should be accounted for with VM_ACCOUNT and VMAs that never had a reserve with VM_NORESERVE. Overcommit for hugetlbfs is much riskier than overcommit for base pages due to contiguity requirements. It avoids overcommiting on both shared and private mappings using reservation counters that are checked and updated during mmap(). This ensures (within limits) that hugepages exist in the future when faults occurs or it is too easy to applications to be SIGKILLed. As hugetlbfs makes its own reservations of a different unit to the base page size, VM_ACCOUNT should never be set. Even if the units were correct, we would double account for the usage in the core VM and hugetlbfs. VM_NORESERVE may be set because an application can request no reserves be made for hugetlbfs at the risk of getting killed later. With commit fc8744adc870a8d4366908221508bb113d8b72ee, VM_NORESERVE and VM_ACCOUNT are getting unconditionally set for hugetlbfs-backed mappings. This breaks the accounting for both the core VM and hugetlbfs, can trigger an OOM storm when hugepage pools are too small lockups and corrupted counters otherwise are used. This patch brings hugetlbfs more in line with how the core VM treats VM_NORESERVE but prevents VM_ACCOUNT being set. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-10 14:02:27 +00:00
* make it unwritable again. hugetlb mapping were accounted for
* even if read-only so there is no need to account for them here
*/
if (newflags & VM_WRITE) {
mm: rework virtual memory accounting When inspecting a vague code inside prctl(PR_SET_MM_MEM) call (which testing the RLIMIT_DATA value to figure out if we're allowed to assign new @start_brk, @brk, @start_data, @end_data from mm_struct) it's been commited that RLIMIT_DATA in a form it's implemented now doesn't do anything useful because most of user-space libraries use mmap() syscall for dynamic memory allocations. Linus suggested to convert RLIMIT_DATA rlimit into something suitable for anonymous memory accounting. But in this patch we go further, and the changes are bundled together as: * keep vma counting if CONFIG_PROC_FS=n, will be used for limits * replace mm->shared_vm with better defined mm->data_vm * account anonymous executable areas as executable * account file-backed growsdown/up areas as stack * drop struct file* argument from vm_stat_account * enforce RLIMIT_DATA for size of data areas This way code looks cleaner: now code/stack/data classification depends only on vm_flags state: VM_EXEC & ~VM_WRITE -> code (VmExe + VmLib in proc) VM_GROWSUP | VM_GROWSDOWN -> stack (VmStk) VM_WRITE & ~VM_SHARED & !stack -> data (VmData) The rest (VmSize - VmData - VmStk - VmExe - VmLib) could be called "shared", but that might be strange beast like readonly-private or VM_IO area. - RLIMIT_AS limits whole address space "VmSize" - RLIMIT_STACK limits stack "VmStk" (but each vma individually) - RLIMIT_DATA now limits "VmData" Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Kees Cook <keescook@google.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:22:07 +00:00
/* Check space limits when area turns into data. */
if (!may_expand_vm(mm, newflags, nrpages) &&
may_expand_vm(mm, oldflags, nrpages))
return -ENOMEM;
Do not account for the address space used by hugetlbfs using VM_ACCOUNT When overcommit is disabled, the core VM accounts for pages used by anonymous shared, private mappings and special mappings. It keeps track of VMAs that should be accounted for with VM_ACCOUNT and VMAs that never had a reserve with VM_NORESERVE. Overcommit for hugetlbfs is much riskier than overcommit for base pages due to contiguity requirements. It avoids overcommiting on both shared and private mappings using reservation counters that are checked and updated during mmap(). This ensures (within limits) that hugepages exist in the future when faults occurs or it is too easy to applications to be SIGKILLed. As hugetlbfs makes its own reservations of a different unit to the base page size, VM_ACCOUNT should never be set. Even if the units were correct, we would double account for the usage in the core VM and hugetlbfs. VM_NORESERVE may be set because an application can request no reserves be made for hugetlbfs at the risk of getting killed later. With commit fc8744adc870a8d4366908221508bb113d8b72ee, VM_NORESERVE and VM_ACCOUNT are getting unconditionally set for hugetlbfs-backed mappings. This breaks the accounting for both the core VM and hugetlbfs, can trigger an OOM storm when hugepage pools are too small lockups and corrupted counters otherwise are used. This patch brings hugetlbfs more in line with how the core VM treats VM_NORESERVE but prevents VM_ACCOUNT being set. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-10 14:02:27 +00:00
if (!(oldflags & (VM_ACCOUNT|VM_WRITE|VM_HUGETLB|
mm: record MAP_NORESERVE status on vmas and fix small page mprotect reservations With Mel's hugetlb private reservation support patches applied, strict overcommit semantics are applied to both shared and private huge page mappings. This can be a problem if an application relied on unlimited overcommit semantics for private mappings. An example of this would be an application which maps a huge area with the intention of using it very sparsely. These application would benefit from being able to opt-out of the strict overcommit. It should be noted that prior to hugetlb supporting demand faulting all mappings were fully populated and so applications of this type should be rare. This patch stack implements the MAP_NORESERVE mmap() flag for huge page mappings. This flag has the same meaning as for small page mappings, suppressing reservations for that mapping. Thanks to Mel Gorman for reviewing a number of early versions of these patches. This patch: When a small page mapping is created with mmap() reservations are created by default for any memory pages required. When the region is read/write the reservation is increased for every page, no reservation is needed for read-only regions (as they implicitly share the zero page). Reservations are tracked via the VM_ACCOUNT vma flag which is present when the region has reservation backing it. When we convert a region from read-only to read-write new reservations are aquired and VM_ACCOUNT is set. However, when a read-only map is created with MAP_NORESERVE it is indistinguishable from a normal mapping. When we then convert that to read/write we are forced to incorrectly create reservations for it as we have no record of the original MAP_NORESERVE. This patch introduces a new vma flag VM_NORESERVE which records the presence of the original MAP_NORESERVE flag. This allows us to distinguish these two circumstances and correctly account the reserve. As well as fixing this FIXME in the code, this makes it much easier to introduce MAP_NORESERVE support for huge pages as this flag is available consistantly for the life of the mapping. VM_ACCOUNT on the other hand is heavily used at the generic level in association with small pages. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Adam Litke <agl@us.ibm.com> Cc: Johannes Weiner <hannes@saeurebad.de> Cc: Andy Whitcroft <apw@shadowen.org> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:28 +00:00
VM_SHARED|VM_NORESERVE))) {
charged = nrpages;
if (security_vm_enough_memory_mm(mm, charged))
return -ENOMEM;
newflags |= VM_ACCOUNT;
}
}
/*
* First try to merge with previous and/or next vma.
*/
pgoff = vma->vm_pgoff + ((start - vma->vm_start) >> PAGE_SHIFT);
*pprev = vma_merge(vmi, mm, *pprev, start, end, newflags,
vma->anon_vma, vma->vm_file, pgoff, vma_policy(vma),
2022-03-05 04:28:51 +00:00
vma->vm_userfaultfd_ctx, anon_vma_name(vma));
if (*pprev) {
vma = *pprev;
mm: vma_merge: fix vm_page_prot SMP race condition against rmap_walk The rmap_walk can access vm_page_prot (and potentially vm_flags in the pte/pmd manipulations). So it's not safe to wait the caller to update the vm_page_prot/vm_flags after vma_merge returned potentially removing the "next" vma and extending the "current" vma over the next->vm_start,vm_end range, but still with the "current" vma vm_page_prot, after releasing the rmap locks. The vm_page_prot/vm_flags must be transferred from the "next" vma to the current vma while vma_merge still holds the rmap locks. The side effect of this race condition is pte corruption during migrate as remove_migration_ptes when run on a address of the "next" vma that got removed, used the vm_page_prot of the current vma. migrate mprotect ------------ ------------- migrating in "next" vma vma_merge() # removes "next" vma and # extends "current" vma # current vma is not with # vm_page_prot updated remove_migration_ptes read vm_page_prot of current "vma" establish pte with wrong permissions vm_set_page_prot(vma) # too late! change_protection in the old vma range only, next range is not updated This caused segmentation faults and potentially memory corruption in heavy mprotect loads with some light page migration caused by compaction in the background. Hugh Dickins pointed out the comment about the Odd case 8 in vma_merge which confirms the case 8 is only buggy one where the race can trigger, in all other vma_merge cases the above cannot happen. This fix removes the oddness factor from case 8 and it converts it from: AAAA PPPPNNNNXXXX -> PPPPNNNNNNNN to: AAAA PPPPNNNNXXXX -> PPPPXXXXXXXX XXXX has the right vma properties for the whole merged vma returned by vma_adjust, so it solves the problem fully. It has the added benefits that the callers could stop updating vma properties when vma_merge succeeds however the callers are not updated by this patch (there are bits like VM_SOFTDIRTY that still need special care for the whole range, as the vma merging ignores them, but as long as they're not processed by rmap walks and instead they're accessed with the mmap_sem at least for reading, they are fine not to be updated within vma_adjust before releasing the rmap_locks). Link: http://lkml.kernel.org/r/1474309513-20313-1-git-send-email-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Aditya Mandaleeka <adityam@microsoft.com> Cc: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jan Vorlicek <janvorli@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 00:01:28 +00:00
VM_WARN_ON((vma->vm_flags ^ newflags) & ~VM_SOFTDIRTY);
goto success;
}
*pprev = vma;
if (start != vma->vm_start) {
error = split_vma(vmi, vma, start, 1);
if (error)
goto fail;
}
if (end != vma->vm_end) {
error = split_vma(vmi, vma, end, 0);
if (error)
goto fail;
}
success:
/*
* vm_flags and vm_page_prot are protected by the mmap_lock
* held in write mode.
*/
vma_start_write(vma);
mm: replace vma->vm_flags direct modifications with modifier calls Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26 19:37:49 +00:00
vm_flags_reset(vma, newflags);
if (vma_wants_manual_pte_write_upgrade(vma))
mm_cp_flags |= MM_CP_TRY_CHANGE_WRITABLE;
mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared For VMAs that don't want write notifications, PTEs created for read faults have their write bit set. If the read fault happens after VM_SOFTDIRTY is cleared, then the PTE's softdirty bit will remain clear after subsequent writes. Here's a simple code snippet to demonstrate the bug: char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_SHARED, -1, 0); system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */ assert(*m == '\0'); /* new PTE allows write access */ assert(!soft_dirty(x)); *m = 'x'; /* should dirty the page */ assert(soft_dirty(x)); /* fails */ With this patch, write notifications are enabled when VM_SOFTDIRTY is cleared. Furthermore, to avoid unnecessary faults, write notifications are disabled when VM_SOFTDIRTY is set. As a side effect of enabling and disabling write notifications with care, this patch fixes a bug in mprotect where vm_page_prot bits set by drivers were zapped on mprotect. An analogous bug was fixed in mmap by commit c9d0bf241451 ("mm: uncached vma support with writenotify"). Signed-off-by: Peter Feiner <pfeiner@google.com> Reported-by: Peter Feiner <pfeiner@google.com> Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Jamie Liu <jamieliu@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-13 22:55:46 +00:00
vma_set_page_prot(vma);
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
change_protection(tlb, vma, start, end, mm_cp_flags);
mm: fix mprotect() behaviour on VM_LOCKED VMAs On mlock(2) we trigger COW on private writable VMA to avoid faults in future. mm/gup.c: 840 long populate_vma_page_range(struct vm_area_struct *vma, 841 unsigned long start, unsigned long end, int *nonblocking) 842 { ... 855 * We want to touch writable mappings with a write fault in order 856 * to break COW, except for shared mappings because these don't COW 857 * and we would not want to dirty them for nothing. 858 */ 859 if ((vma->vm_flags & (VM_WRITE | VM_SHARED)) == VM_WRITE) 860 gup_flags |= FOLL_WRITE; But we miss this case when we make VM_LOCKED VMA writeable via mprotect(2). The test case: #define _GNU_SOURCE #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #include <sys/resource.h> #include <sys/stat.h> #include <sys/time.h> #include <sys/types.h> #define PAGE_SIZE 4096 int main(int argc, char **argv) { struct rusage usage; long before; char *p; int fd; /* Create a file and populate first page of page cache */ fd = open("/tmp", O_TMPFILE | O_RDWR, S_IRUSR | S_IWUSR); write(fd, "1", 1); /* Create a *read-only* *private* mapping of the file */ p = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_PRIVATE, fd, 0); /* * Since the mapping is read-only, mlock() will populate the mapping * with PTEs pointing to page cache without triggering COW. */ mlock(p, PAGE_SIZE); /* * Mapping became read-write, but it's still populated with PTEs * pointing to page cache. */ mprotect(p, PAGE_SIZE, PROT_READ | PROT_WRITE); getrusage(RUSAGE_SELF, &usage); before = usage.ru_minflt; /* Trigger COW: fault in mlock()ed VMA. */ *p = 1; getrusage(RUSAGE_SELF, &usage); printf("faults: %ld\n", usage.ru_minflt - before); return 0; } $ ./test faults: 1 Let's fix it by triggering populating of VMA in mprotect_fixup() on this condition. We don't care about population error as we don't in other similar cases i.e. mremap. [akpm@linux-foundation.org: tweak comment text] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:56:10 +00:00
/*
* Private VM_LOCKED VMA becoming writable: trigger COW to avoid major
* fault on access.
*/
if ((oldflags & (VM_WRITE | VM_SHARED | VM_LOCKED)) == VM_LOCKED &&
(newflags & VM_WRITE)) {
populate_vma_page_range(vma, start, end, NULL);
}
mm: rework virtual memory accounting When inspecting a vague code inside prctl(PR_SET_MM_MEM) call (which testing the RLIMIT_DATA value to figure out if we're allowed to assign new @start_brk, @brk, @start_data, @end_data from mm_struct) it's been commited that RLIMIT_DATA in a form it's implemented now doesn't do anything useful because most of user-space libraries use mmap() syscall for dynamic memory allocations. Linus suggested to convert RLIMIT_DATA rlimit into something suitable for anonymous memory accounting. But in this patch we go further, and the changes are bundled together as: * keep vma counting if CONFIG_PROC_FS=n, will be used for limits * replace mm->shared_vm with better defined mm->data_vm * account anonymous executable areas as executable * account file-backed growsdown/up areas as stack * drop struct file* argument from vm_stat_account * enforce RLIMIT_DATA for size of data areas This way code looks cleaner: now code/stack/data classification depends only on vm_flags state: VM_EXEC & ~VM_WRITE -> code (VmExe + VmLib in proc) VM_GROWSUP | VM_GROWSDOWN -> stack (VmStk) VM_WRITE & ~VM_SHARED & !stack -> data (VmData) The rest (VmSize - VmData - VmStk - VmExe - VmLib) could be called "shared", but that might be strange beast like readonly-private or VM_IO area. - RLIMIT_AS limits whole address space "VmSize" - RLIMIT_STACK limits stack "VmStk" (but each vma individually) - RLIMIT_DATA now limits "VmData" Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Kees Cook <keescook@google.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:22:07 +00:00
vm_stat_account(mm, oldflags, -nrpages);
vm_stat_account(mm, newflags, nrpages);
perf_event_mmap(vma);
return 0;
fail:
vm_unacct_memory(charged);
return error;
}
mm: Implement new pkey_mprotect() system call pkey_mprotect() is just like mprotect, except it also takes a protection key as an argument. On systems that do not support protection keys, it still works, but requires that key=0. Otherwise it does exactly what mprotect does. I expect it to get used like this, if you want to guarantee that any mapping you create can *never* be accessed without the right protection keys set up. int real_prot = PROT_READ|PROT_WRITE; pkey = pkey_alloc(0, PKEY_DENY_ACCESS); ptr = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); ret = pkey_mprotect(ptr, PAGE_SIZE, real_prot, pkey); This way, there is *no* window where the mapping is accessible since it was always either PROT_NONE or had a protection key set that denied all access. We settled on 'unsigned long' for the type of the key here. We only need 4 bits on x86 today, but I figured that other architectures might need some more space. Semantically, we have a bit of a problem if we combine this syscall with our previously-introduced execute-only support: What do we do when we mix execute-only pkey use with pkey_mprotect() use? For instance: pkey_mprotect(ptr, PAGE_SIZE, PROT_WRITE, 6); // set pkey=6 mprotect(ptr, PAGE_SIZE, PROT_EXEC); // set pkey=X_ONLY_PKEY? mprotect(ptr, PAGE_SIZE, PROT_WRITE); // is pkey=6 again? To solve that, we make the plain-mprotect()-initiated execute-only support only apply to VMAs that have the default protection key (0) set on them. Proposed semantics: 1. protection key 0 is special and represents the default, "unassigned" protection key. It is always allocated. 2. mprotect() never affects a mapping's pkey_mprotect()-assigned protection key. A protection key of 0 (even if set explicitly) represents an unassigned protection key. 2a. mprotect(PROT_EXEC) on a mapping with an assigned protection key may or may not result in a mapping with execute-only properties. pkey_mprotect() plus pkey_set() on all threads should be used to _guarantee_ execute-only semantics if this is not a strong enough semantic. 3. mprotect(PROT_EXEC) may result in an "execute-only" mapping. The kernel will internally attempt to allocate and dedicate a protection key for the purpose of execute-only mappings. This may not be possible in cases where there are no free protection keys available. It can also happen, of course, in situations where there is no hardware support for protection keys. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163012.3DDD36C4@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 16:30:12 +00:00
/*
* pkey==-1 when doing a legacy mprotect()
*/
static int do_mprotect_pkey(unsigned long start, size_t len,
unsigned long prot, int pkey)
{
mm/core, x86/mm/pkeys: Add execute-only protection keys support Protection keys provide new page-based protection in hardware. But, they have an interesting attribute: they only affect data accesses and never affect instruction fetches. That means that if we set up some memory which is set as "access-disabled" via protection keys, we can still execute from it. This patch uses protection keys to set up mappings to do just that. If a user calls: mmap(..., PROT_EXEC); or mprotect(ptr, sz, PROT_EXEC); (note PROT_EXEC-only without PROT_READ/WRITE), the kernel will notice this, and set a special protection key on the memory. It also sets the appropriate bits in the Protection Keys User Rights (PKRU) register so that the memory becomes unreadable and unwritable. I haven't found any userspace that does this today. With this facility in place, we expect userspace to move to use it eventually. Userspace _could_ start doing this today. Any PROT_EXEC calls get converted to PROT_READ inside the kernel, and would transparently be upgraded to "true" PROT_EXEC with this code. IOW, userspace never has to do any PROT_EXEC runtime detection. This feature provides enhanced protection against leaking executable memory contents. This helps thwart attacks which are attempting to find ROP gadgets on the fly. But, the security provided by this approach is not comprehensive. The PKRU register which controls access permissions is a normal user register writable from unprivileged userspace. An attacker who can execute the 'wrpkru' instruction can easily disable the protection provided by this feature. The protection key that is used for execute-only support is permanently dedicated at compile time. This is fine for now because there is currently no API to set a protection key other than this one. Despite there being a constant PKRU value across the entire system, we do not set it unless this feature is in use in a process. That is to preserve the PKRU XSAVE 'init state', which can lead to faster context switches. PKRU *is* a user register and the kernel is modifying it. That means that code doing: pkru = rdpkru() pkru |= 0x100; mmap(..., PROT_EXEC); wrpkru(pkru); could lose the bits in PKRU that enforce execute-only permissions. To avoid this, we suggest avoiding ever calling mmap() or mprotect() when the PKRU value is expected to be unstable. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave@sr71.net> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Piotr Kwapulinski <kwapulinski.piotr@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: keescook@google.com Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210240.CB4BB5CA@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-12 21:02:40 +00:00
unsigned long nstart, end, tmp, reqprot;
struct vm_area_struct *vma, *prev;
int error;
const int grows = prot & (PROT_GROWSDOWN|PROT_GROWSUP);
const bool rier = (current->personality & READ_IMPLIES_EXEC) &&
(prot & PROT_READ);
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
struct mmu_gather tlb;
struct vma_iterator vmi;
start = untagged_addr(start);
prot &= ~(PROT_GROWSDOWN|PROT_GROWSUP);
if (grows == (PROT_GROWSDOWN|PROT_GROWSUP)) /* can't be both */
return -EINVAL;
if (start & ~PAGE_MASK)
return -EINVAL;
if (!len)
return 0;
len = PAGE_ALIGN(len);
end = start + len;
if (end <= start)
return -ENOMEM;
if (!arch_validate_prot(prot, start))
return -EINVAL;
reqprot = prot;
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
if (mmap_write_lock_killable(current->mm))
mm: make mmap_sem for write waits killable for mm syscalls This is a follow up work for oom_reaper [1]. As the async OOM killing depends on oom_sem for read we would really appreciate if a holder for write didn't stood in the way. This patchset is changing many of down_write calls to be killable to help those cases when the writer is blocked and waiting for readers to release the lock and so help __oom_reap_task to process the oom victim. Most of the patches are really trivial because the lock is help from a shallow syscall paths where we can return EINTR trivially and allow the current task to die (note that EINTR will never get to the userspace as the task has fatal signal pending). Others seem to be easy as well as the callers are already handling fatal errors and bail and return to userspace which should be sufficient to handle the failure gracefully. I am not familiar with all those code paths so a deeper review is really appreciated. As this work is touching more areas which are not directly connected I have tried to keep the CC list as small as possible and people who I believed would be familiar are CCed only to the specific patches (all should have received the cover though). This patchset is based on linux-next and it depends on down_write_killable for rw_semaphores which got merged into tip locking/rwsem branch and it is merged into this next tree. I guess it would be easiest to route these patches via mmotm because of the dependency on the tip tree but if respective maintainers prefer other way I have no objections. I haven't covered all the mmap_write(mm->mmap_sem) instances here $ git grep "down_write(.*\<mmap_sem\>)" next/master | wc -l 98 $ git grep "down_write(.*\<mmap_sem\>)" | wc -l 62 I have tried to cover those which should be relatively easy to review in this series because this alone should be a nice improvement. Other places can be changed on top. [0] http://lkml.kernel.org/r/1456752417-9626-1-git-send-email-mhocko@kernel.org [1] http://lkml.kernel.org/r/1452094975-551-1-git-send-email-mhocko@kernel.org [2] http://lkml.kernel.org/r/1456750705-7141-1-git-send-email-mhocko@kernel.org This patch (of 18): This is the first step in making mmap_sem write waiters killable. It focuses on the trivial ones which are taking the lock early after entering the syscall and they are not changing state before. Therefore it is very easy to change them to use down_write_killable and immediately return with -EINTR. This will allow the waiter to pass away without blocking the mmap_sem which might be required to make a forward progress. E.g. the oom reaper will need the lock for reading to dismantle the OOM victim address space. The only tricky function in this patch is vm_mmap_pgoff which has many call sites via vm_mmap. To reduce the risk keep vm_mmap with the original non-killable semantic for now. vm_munmap callers do not bother checking the return value so open code it into the munmap syscall path for now for simplicity. Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 23:25:27 +00:00
return -EINTR;
x86/pkeys: Allocation/free syscalls This patch adds two new system calls: int pkey_alloc(unsigned long flags, unsigned long init_access_rights) int pkey_free(int pkey); These implement an "allocator" for the protection keys themselves, which can be thought of as analogous to the allocator that the kernel has for file descriptors. The kernel tracks which numbers are in use, and only allows operations on keys that are valid. A key which was not obtained by pkey_alloc() may not, for instance, be passed to pkey_mprotect(). These system calls are also very important given the kernel's use of pkeys to implement execute-only support. These help ensure that userspace can never assume that it has control of a key unless it first asks the kernel. The kernel does not promise to preserve PKRU (right register) contents except for allocated pkeys. The 'init_access_rights' argument to pkey_alloc() specifies the rights that will be established for the returned pkey. For instance: pkey = pkey_alloc(flags, PKEY_DENY_WRITE); will allocate 'pkey', but also sets the bits in PKRU[1] such that writing to 'pkey' is already denied. The kernel does not prevent pkey_free() from successfully freeing in-use pkeys (those still assigned to a memory range by pkey_mprotect()). It would be expensive to implement the checks for this, so we instead say, "Just don't do it" since sane software will never do it anyway. Any piece of userspace calling pkey_alloc() needs to be prepared for it to fail. Why? pkey_alloc() returns the same error code (ENOSPC) when there are no pkeys and when pkeys are unsupported. They can be unsupported for a whole host of reasons, so apps must be prepared for this. Also, libraries or LD_PRELOADs might steal keys before an application gets access to them. This allocation mechanism could be implemented in userspace. Even if we did it in userspace, we would still need additional user/kernel interfaces to tell userspace which keys are being used by the kernel internally (such as for execute-only mappings). Having the kernel provide this facility completely removes the need for these additional interfaces, or having an implementation of this in userspace at all. Note that we have to make changes to all of the architectures that do not use mman-common.h because we use the new PKEY_DENY_ACCESS/WRITE macros in arch-independent code. 1. PKRU is the Protection Key Rights User register. It is a usermode-accessible register that controls whether writes and/or access to each individual pkey is allowed or denied. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 16:30:15 +00:00
/*
* If userspace did not allocate the pkey, do not let
* them use it here.
*/
error = -EINVAL;
if ((pkey != -1) && !mm_pkey_is_allocated(current->mm, pkey))
goto out;
vma_iter_init(&vmi, current->mm, start);
vma = vma_find(&vmi, end);
error = -ENOMEM;
if (!vma)
goto out;
if (unlikely(grows & PROT_GROWSDOWN)) {
if (vma->vm_start >= end)
goto out;
start = vma->vm_start;
error = -EINVAL;
if (!(vma->vm_flags & VM_GROWSDOWN))
goto out;
} else {
if (vma->vm_start > start)
goto out;
if (unlikely(grows & PROT_GROWSUP)) {
end = vma->vm_end;
error = -EINVAL;
if (!(vma->vm_flags & VM_GROWSUP))
goto out;
}
}
prev = vma_prev(&vmi);
if (start > vma->vm_start)
prev = vma;
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
tlb_gather_mmu(&tlb, current->mm);
nstart = start;
tmp = vma->vm_start;
for_each_vma_range(vmi, vma, end) {
unsigned long mask_off_old_flags;
unsigned long newflags;
mm: Implement new pkey_mprotect() system call pkey_mprotect() is just like mprotect, except it also takes a protection key as an argument. On systems that do not support protection keys, it still works, but requires that key=0. Otherwise it does exactly what mprotect does. I expect it to get used like this, if you want to guarantee that any mapping you create can *never* be accessed without the right protection keys set up. int real_prot = PROT_READ|PROT_WRITE; pkey = pkey_alloc(0, PKEY_DENY_ACCESS); ptr = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); ret = pkey_mprotect(ptr, PAGE_SIZE, real_prot, pkey); This way, there is *no* window where the mapping is accessible since it was always either PROT_NONE or had a protection key set that denied all access. We settled on 'unsigned long' for the type of the key here. We only need 4 bits on x86 today, but I figured that other architectures might need some more space. Semantically, we have a bit of a problem if we combine this syscall with our previously-introduced execute-only support: What do we do when we mix execute-only pkey use with pkey_mprotect() use? For instance: pkey_mprotect(ptr, PAGE_SIZE, PROT_WRITE, 6); // set pkey=6 mprotect(ptr, PAGE_SIZE, PROT_EXEC); // set pkey=X_ONLY_PKEY? mprotect(ptr, PAGE_SIZE, PROT_WRITE); // is pkey=6 again? To solve that, we make the plain-mprotect()-initiated execute-only support only apply to VMAs that have the default protection key (0) set on them. Proposed semantics: 1. protection key 0 is special and represents the default, "unassigned" protection key. It is always allocated. 2. mprotect() never affects a mapping's pkey_mprotect()-assigned protection key. A protection key of 0 (even if set explicitly) represents an unassigned protection key. 2a. mprotect(PROT_EXEC) on a mapping with an assigned protection key may or may not result in a mapping with execute-only properties. pkey_mprotect() plus pkey_set() on all threads should be used to _guarantee_ execute-only semantics if this is not a strong enough semantic. 3. mprotect(PROT_EXEC) may result in an "execute-only" mapping. The kernel will internally attempt to allocate and dedicate a protection key for the purpose of execute-only mappings. This may not be possible in cases where there are no free protection keys available. It can also happen, of course, in situations where there is no hardware support for protection keys. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163012.3DDD36C4@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 16:30:12 +00:00
int new_vma_pkey;
if (vma->vm_start != tmp) {
error = -ENOMEM;
break;
}
/* Does the application expect PROT_READ to imply PROT_EXEC */
if (rier && (vma->vm_flags & VM_MAYEXEC))
prot |= PROT_EXEC;
/*
* Each mprotect() call explicitly passes r/w/x permissions.
* If a permission is not passed to mprotect(), it must be
* cleared from the VMA.
*/
mask_off_old_flags = VM_ACCESS_FLAGS | VM_FLAGS_CLEAR;
mm: Implement new pkey_mprotect() system call pkey_mprotect() is just like mprotect, except it also takes a protection key as an argument. On systems that do not support protection keys, it still works, but requires that key=0. Otherwise it does exactly what mprotect does. I expect it to get used like this, if you want to guarantee that any mapping you create can *never* be accessed without the right protection keys set up. int real_prot = PROT_READ|PROT_WRITE; pkey = pkey_alloc(0, PKEY_DENY_ACCESS); ptr = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); ret = pkey_mprotect(ptr, PAGE_SIZE, real_prot, pkey); This way, there is *no* window where the mapping is accessible since it was always either PROT_NONE or had a protection key set that denied all access. We settled on 'unsigned long' for the type of the key here. We only need 4 bits on x86 today, but I figured that other architectures might need some more space. Semantically, we have a bit of a problem if we combine this syscall with our previously-introduced execute-only support: What do we do when we mix execute-only pkey use with pkey_mprotect() use? For instance: pkey_mprotect(ptr, PAGE_SIZE, PROT_WRITE, 6); // set pkey=6 mprotect(ptr, PAGE_SIZE, PROT_EXEC); // set pkey=X_ONLY_PKEY? mprotect(ptr, PAGE_SIZE, PROT_WRITE); // is pkey=6 again? To solve that, we make the plain-mprotect()-initiated execute-only support only apply to VMAs that have the default protection key (0) set on them. Proposed semantics: 1. protection key 0 is special and represents the default, "unassigned" protection key. It is always allocated. 2. mprotect() never affects a mapping's pkey_mprotect()-assigned protection key. A protection key of 0 (even if set explicitly) represents an unassigned protection key. 2a. mprotect(PROT_EXEC) on a mapping with an assigned protection key may or may not result in a mapping with execute-only properties. pkey_mprotect() plus pkey_set() on all threads should be used to _guarantee_ execute-only semantics if this is not a strong enough semantic. 3. mprotect(PROT_EXEC) may result in an "execute-only" mapping. The kernel will internally attempt to allocate and dedicate a protection key for the purpose of execute-only mappings. This may not be possible in cases where there are no free protection keys available. It can also happen, of course, in situations where there is no hardware support for protection keys. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163012.3DDD36C4@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 16:30:12 +00:00
new_vma_pkey = arch_override_mprotect_pkey(vma, prot, pkey);
newflags = calc_vm_prot_bits(prot, new_vma_pkey);
newflags |= (vma->vm_flags & ~mask_off_old_flags);
/* newflags >> 4 shift VM_MAY% in place of VM_% */
if ((newflags & ~(newflags >> 4)) & VM_ACCESS_FLAGS) {
error = -EACCES;
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
break;
}
mm: implement memory-deny-write-execute as a prctl Patch series "mm: In-kernel support for memory-deny-write-execute (MDWE)", v2. The background to this is that systemd has a configuration option called MemoryDenyWriteExecute [2], implemented as a SECCOMP BPF filter. Its aim is to prevent a user task from inadvertently creating an executable mapping that is (or was) writeable. Since such BPF filter is stateless, it cannot detect mappings that were previously writeable but subsequently changed to read-only. Therefore the filter simply rejects any mprotect(PROT_EXEC). The side-effect is that on arm64 with BTI support (Branch Target Identification), the dynamic loader cannot change an ELF section from PROT_EXEC to PROT_EXEC|PROT_BTI using mprotect(). For libraries, it can resort to unmapping and re-mapping but for the main executable it does not have a file descriptor. The original bug report in the Red Hat bugzilla - [3] - and subsequent glibc workaround for libraries - [4]. This series adds in-kernel support for this feature as a prctl PR_SET_MDWE, that is inherited on fork(). The prctl denies PROT_WRITE | PROT_EXEC mappings. Like the systemd BPF filter it also denies adding PROT_EXEC to mappings. However unlike the BPF filter it only denies it if the mapping didn't previous have PROT_EXEC. This allows to PROT_EXEC -> PROT_EXEC | PROT_BTI with mprotect(), which is a problem with the BPF filter. This patch (of 2): The aim of such policy is to prevent a user task from creating an executable mapping that is also writeable. An example of mmap() returning -EACCESS if the policy is enabled: mmap(0, size, PROT_READ | PROT_WRITE | PROT_EXEC, flags, 0, 0); Similarly, mprotect() would return -EACCESS below: addr = mmap(0, size, PROT_READ | PROT_EXEC, flags, 0, 0); mprotect(addr, size, PROT_READ | PROT_WRITE | PROT_EXEC); The BPF filter that systemd MDWE uses is stateless, and disallows mprotect() with PROT_EXEC completely. This new prctl allows PROT_EXEC to be enabled if it was already PROT_EXEC, which allows the following case: addr = mmap(0, size, PROT_READ | PROT_EXEC, flags, 0, 0); mprotect(addr, size, PROT_READ | PROT_EXEC | PROT_BTI); where PROT_BTI enables branch tracking identification on arm64. Link: https://lkml.kernel.org/r/20230119160344.54358-1-joey.gouly@arm.com Link: https://lkml.kernel.org/r/20230119160344.54358-2-joey.gouly@arm.com Signed-off-by: Joey Gouly <joey.gouly@arm.com> Co-developed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jeremy Linton <jeremy.linton@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Mark Brown <broonie@kernel.org> Cc: nd <nd@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Szabolcs Nagy <szabolcs.nagy@arm.com> Cc: Topi Miettinen <toiwoton@gmail.com> Cc: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-19 16:03:43 +00:00
if (map_deny_write_exec(vma, newflags)) {
error = -EACCES;
break;
mm: implement memory-deny-write-execute as a prctl Patch series "mm: In-kernel support for memory-deny-write-execute (MDWE)", v2. The background to this is that systemd has a configuration option called MemoryDenyWriteExecute [2], implemented as a SECCOMP BPF filter. Its aim is to prevent a user task from inadvertently creating an executable mapping that is (or was) writeable. Since such BPF filter is stateless, it cannot detect mappings that were previously writeable but subsequently changed to read-only. Therefore the filter simply rejects any mprotect(PROT_EXEC). The side-effect is that on arm64 with BTI support (Branch Target Identification), the dynamic loader cannot change an ELF section from PROT_EXEC to PROT_EXEC|PROT_BTI using mprotect(). For libraries, it can resort to unmapping and re-mapping but for the main executable it does not have a file descriptor. The original bug report in the Red Hat bugzilla - [3] - and subsequent glibc workaround for libraries - [4]. This series adds in-kernel support for this feature as a prctl PR_SET_MDWE, that is inherited on fork(). The prctl denies PROT_WRITE | PROT_EXEC mappings. Like the systemd BPF filter it also denies adding PROT_EXEC to mappings. However unlike the BPF filter it only denies it if the mapping didn't previous have PROT_EXEC. This allows to PROT_EXEC -> PROT_EXEC | PROT_BTI with mprotect(), which is a problem with the BPF filter. This patch (of 2): The aim of such policy is to prevent a user task from creating an executable mapping that is also writeable. An example of mmap() returning -EACCESS if the policy is enabled: mmap(0, size, PROT_READ | PROT_WRITE | PROT_EXEC, flags, 0, 0); Similarly, mprotect() would return -EACCESS below: addr = mmap(0, size, PROT_READ | PROT_EXEC, flags, 0, 0); mprotect(addr, size, PROT_READ | PROT_WRITE | PROT_EXEC); The BPF filter that systemd MDWE uses is stateless, and disallows mprotect() with PROT_EXEC completely. This new prctl allows PROT_EXEC to be enabled if it was already PROT_EXEC, which allows the following case: addr = mmap(0, size, PROT_READ | PROT_EXEC, flags, 0, 0); mprotect(addr, size, PROT_READ | PROT_EXEC | PROT_BTI); where PROT_BTI enables branch tracking identification on arm64. Link: https://lkml.kernel.org/r/20230119160344.54358-1-joey.gouly@arm.com Link: https://lkml.kernel.org/r/20230119160344.54358-2-joey.gouly@arm.com Signed-off-by: Joey Gouly <joey.gouly@arm.com> Co-developed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jeremy Linton <jeremy.linton@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Mark Brown <broonie@kernel.org> Cc: nd <nd@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Szabolcs Nagy <szabolcs.nagy@arm.com> Cc: Topi Miettinen <toiwoton@gmail.com> Cc: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-19 16:03:43 +00:00
}
/* Allow architectures to sanity-check the new flags */
if (!arch_validate_flags(newflags)) {
error = -EINVAL;
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
break;
}
error = security_file_mprotect(vma, reqprot, prot);
if (error)
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
break;
tmp = vma->vm_end;
if (tmp > end)
tmp = end;
mm: Add 'mprotect' hook to struct vm_operations_struct Background ========== 1. SGX enclave pages are populated with data by copying from normal memory via ioctl() (SGX_IOC_ENCLAVE_ADD_PAGES), which will be added later in this series. 2. It is desirable to be able to restrict those normal memory data sources. For instance, to ensure that the source data is executable before copying data to an executable enclave page. 3. Enclave page permissions are dynamic (just like normal permissions) and can be adjusted at runtime with mprotect(). This creates a problem because the original data source may have long since vanished at the time when enclave page permissions are established (mmap() or mprotect()). The solution (elsewhere in this series) is to force enclave creators to declare their paging permission *intent* up front to the ioctl(). This intent can be immediately compared to the source data’s mapping and rejected if necessary. The “intent” is also stashed off for later comparison with enclave PTEs. This ensures that any future mmap()/mprotect() operations performed by the enclave creator or done on behalf of the enclave can be compared with the earlier declared permissions. Problem ======= There is an existing mmap() hook which allows SGX to perform this permission comparison at mmap() time. However, there is no corresponding ->mprotect() hook. Solution ======== Add a vm_ops->mprotect() hook so that mprotect() operations which are inconsistent with any page's stashed intent can be rejected by the driver. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Co-developed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Jethro Beekman <jethro@fortanix.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Hillf Danton <hdanton@sina.com> Cc: linux-mm@kvack.org Link: https://lkml.kernel.org/r/20201112220135.165028-11-jarkko@kernel.org
2020-11-12 22:01:21 +00:00
if (vma->vm_ops && vma->vm_ops->mprotect) {
mm: Add 'mprotect' hook to struct vm_operations_struct Background ========== 1. SGX enclave pages are populated with data by copying from normal memory via ioctl() (SGX_IOC_ENCLAVE_ADD_PAGES), which will be added later in this series. 2. It is desirable to be able to restrict those normal memory data sources. For instance, to ensure that the source data is executable before copying data to an executable enclave page. 3. Enclave page permissions are dynamic (just like normal permissions) and can be adjusted at runtime with mprotect(). This creates a problem because the original data source may have long since vanished at the time when enclave page permissions are established (mmap() or mprotect()). The solution (elsewhere in this series) is to force enclave creators to declare their paging permission *intent* up front to the ioctl(). This intent can be immediately compared to the source data’s mapping and rejected if necessary. The “intent” is also stashed off for later comparison with enclave PTEs. This ensures that any future mmap()/mprotect() operations performed by the enclave creator or done on behalf of the enclave can be compared with the earlier declared permissions. Problem ======= There is an existing mmap() hook which allows SGX to perform this permission comparison at mmap() time. However, there is no corresponding ->mprotect() hook. Solution ======== Add a vm_ops->mprotect() hook so that mprotect() operations which are inconsistent with any page's stashed intent can be rejected by the driver. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Co-developed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Jethro Beekman <jethro@fortanix.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Hillf Danton <hdanton@sina.com> Cc: linux-mm@kvack.org Link: https://lkml.kernel.org/r/20201112220135.165028-11-jarkko@kernel.org
2020-11-12 22:01:21 +00:00
error = vma->vm_ops->mprotect(vma, nstart, tmp, newflags);
if (error)
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
break;
}
mm: Add 'mprotect' hook to struct vm_operations_struct Background ========== 1. SGX enclave pages are populated with data by copying from normal memory via ioctl() (SGX_IOC_ENCLAVE_ADD_PAGES), which will be added later in this series. 2. It is desirable to be able to restrict those normal memory data sources. For instance, to ensure that the source data is executable before copying data to an executable enclave page. 3. Enclave page permissions are dynamic (just like normal permissions) and can be adjusted at runtime with mprotect(). This creates a problem because the original data source may have long since vanished at the time when enclave page permissions are established (mmap() or mprotect()). The solution (elsewhere in this series) is to force enclave creators to declare their paging permission *intent* up front to the ioctl(). This intent can be immediately compared to the source data’s mapping and rejected if necessary. The “intent” is also stashed off for later comparison with enclave PTEs. This ensures that any future mmap()/mprotect() operations performed by the enclave creator or done on behalf of the enclave can be compared with the earlier declared permissions. Problem ======= There is an existing mmap() hook which allows SGX to perform this permission comparison at mmap() time. However, there is no corresponding ->mprotect() hook. Solution ======== Add a vm_ops->mprotect() hook so that mprotect() operations which are inconsistent with any page's stashed intent can be rejected by the driver. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Co-developed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Jethro Beekman <jethro@fortanix.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Hillf Danton <hdanton@sina.com> Cc: linux-mm@kvack.org Link: https://lkml.kernel.org/r/20201112220135.165028-11-jarkko@kernel.org
2020-11-12 22:01:21 +00:00
error = mprotect_fixup(&vmi, &tlb, vma, &prev, nstart, tmp, newflags);
if (error)
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
break;
mm: Add 'mprotect' hook to struct vm_operations_struct Background ========== 1. SGX enclave pages are populated with data by copying from normal memory via ioctl() (SGX_IOC_ENCLAVE_ADD_PAGES), which will be added later in this series. 2. It is desirable to be able to restrict those normal memory data sources. For instance, to ensure that the source data is executable before copying data to an executable enclave page. 3. Enclave page permissions are dynamic (just like normal permissions) and can be adjusted at runtime with mprotect(). This creates a problem because the original data source may have long since vanished at the time when enclave page permissions are established (mmap() or mprotect()). The solution (elsewhere in this series) is to force enclave creators to declare their paging permission *intent* up front to the ioctl(). This intent can be immediately compared to the source data’s mapping and rejected if necessary. The “intent” is also stashed off for later comparison with enclave PTEs. This ensures that any future mmap()/mprotect() operations performed by the enclave creator or done on behalf of the enclave can be compared with the earlier declared permissions. Problem ======= There is an existing mmap() hook which allows SGX to perform this permission comparison at mmap() time. However, there is no corresponding ->mprotect() hook. Solution ======== Add a vm_ops->mprotect() hook so that mprotect() operations which are inconsistent with any page's stashed intent can be rejected by the driver. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Co-developed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Jethro Beekman <jethro@fortanix.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Hillf Danton <hdanton@sina.com> Cc: linux-mm@kvack.org Link: https://lkml.kernel.org/r/20201112220135.165028-11-jarkko@kernel.org
2020-11-12 22:01:21 +00:00
tmp = vma_iter_end(&vmi);
nstart = tmp;
prot = reqprot;
}
mm/mprotect: use mmu_gather Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6. This patchset is intended to remove unnecessary TLB flushes during mprotect() syscalls. Once this patch-set make it through, similar and further optimizations for MADV_COLD and userfaultfd would be possible. Basically, there are 3 optimizations in this patch-set: 1. Use TLB batching infrastructure to batch flushes across VMAs and do better/fewer flushes. This would also be handy for later userfaultfd enhancements. 2. Avoid unnecessary TLB flushes. This optimization is the one that provides most of the performance benefits. Unlike previous versions, we now only avoid flushes that would not result in spurious page-faults. 3. Avoiding TLB flushes on change_huge_pmd() that are only needed to prevent the A/D bits from changing. Andrew asked for some benchmark numbers. I do not have an easy determinate macrobenchmark in which it is easy to show benefit. I therefore ran a microbenchmark: a loop that does the following on anonymous memory, just as a sanity check to see that time is saved by avoiding TLB flushes. The loop goes: mprotect(p, PAGE_SIZE, PROT_READ) mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE) *p = 0; // make the page writable The test was run in KVM guest with 1 or 2 threads (the second thread was busy-looping). I measured the time (cycles) of each operation: 1 thread 2 threads mmots +patch mmots +patch PROT_READ 3494 2725 (-22%) 8630 7788 (-10%) PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%) [ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ] The exact numbers are really meaningless, but the benefit is clear. There are 2 interesting results though. (1) PROT_READ is cheaper, while one can expect it not to be affected. This is presumably due to TLB miss that is saved (2) Without memory access (*p = 0), the speedup of the patch is even greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush. As a result both operations on the patched kernel take roughly ~1500 cycles (with either 1 or 2 threads), whereas on mmotm their cost is as high as presented in the table. This patch (of 3): change_pXX_range() currently does not use mmu_gather, but instead implements its own deferred TLB flushes scheme. This both complicates the code, as developers need to be aware of different invalidation schemes, and prevents opportunities to avoid TLB flushes or perform them in finer granularity. The use of mmu_gather for modified PTEs has benefits in various scenarios even if pages are not released. For instance, if only a single page needs to be flushed out of a range of many pages, only that page would be flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction can be used instead of 512 instructions (or a full TLB flush, which would Linux would actually use by default). mprotect() over multiple VMAs requires a single flush. Use mmu_gather in change_pXX_range(). As the pages are not released, only record the flushed range using tlb_flush_pXX_range(). Handle THP similarly and get rid of flush_cache_range() which becomes redundant since tlb_start_vma() calls it when needed. Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:50 +00:00
tlb_finish_mmu(&tlb);
if (!error && tmp < end)
error = -ENOMEM;
out:
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_write_unlock(current->mm);
return error;
}
mm: Implement new pkey_mprotect() system call pkey_mprotect() is just like mprotect, except it also takes a protection key as an argument. On systems that do not support protection keys, it still works, but requires that key=0. Otherwise it does exactly what mprotect does. I expect it to get used like this, if you want to guarantee that any mapping you create can *never* be accessed without the right protection keys set up. int real_prot = PROT_READ|PROT_WRITE; pkey = pkey_alloc(0, PKEY_DENY_ACCESS); ptr = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); ret = pkey_mprotect(ptr, PAGE_SIZE, real_prot, pkey); This way, there is *no* window where the mapping is accessible since it was always either PROT_NONE or had a protection key set that denied all access. We settled on 'unsigned long' for the type of the key here. We only need 4 bits on x86 today, but I figured that other architectures might need some more space. Semantically, we have a bit of a problem if we combine this syscall with our previously-introduced execute-only support: What do we do when we mix execute-only pkey use with pkey_mprotect() use? For instance: pkey_mprotect(ptr, PAGE_SIZE, PROT_WRITE, 6); // set pkey=6 mprotect(ptr, PAGE_SIZE, PROT_EXEC); // set pkey=X_ONLY_PKEY? mprotect(ptr, PAGE_SIZE, PROT_WRITE); // is pkey=6 again? To solve that, we make the plain-mprotect()-initiated execute-only support only apply to VMAs that have the default protection key (0) set on them. Proposed semantics: 1. protection key 0 is special and represents the default, "unassigned" protection key. It is always allocated. 2. mprotect() never affects a mapping's pkey_mprotect()-assigned protection key. A protection key of 0 (even if set explicitly) represents an unassigned protection key. 2a. mprotect(PROT_EXEC) on a mapping with an assigned protection key may or may not result in a mapping with execute-only properties. pkey_mprotect() plus pkey_set() on all threads should be used to _guarantee_ execute-only semantics if this is not a strong enough semantic. 3. mprotect(PROT_EXEC) may result in an "execute-only" mapping. The kernel will internally attempt to allocate and dedicate a protection key for the purpose of execute-only mappings. This may not be possible in cases where there are no free protection keys available. It can also happen, of course, in situations where there is no hardware support for protection keys. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163012.3DDD36C4@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 16:30:12 +00:00
SYSCALL_DEFINE3(mprotect, unsigned long, start, size_t, len,
unsigned long, prot)
{
return do_mprotect_pkey(start, len, prot, -1);
}
#ifdef CONFIG_ARCH_HAS_PKEYS
mm: Implement new pkey_mprotect() system call pkey_mprotect() is just like mprotect, except it also takes a protection key as an argument. On systems that do not support protection keys, it still works, but requires that key=0. Otherwise it does exactly what mprotect does. I expect it to get used like this, if you want to guarantee that any mapping you create can *never* be accessed without the right protection keys set up. int real_prot = PROT_READ|PROT_WRITE; pkey = pkey_alloc(0, PKEY_DENY_ACCESS); ptr = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); ret = pkey_mprotect(ptr, PAGE_SIZE, real_prot, pkey); This way, there is *no* window where the mapping is accessible since it was always either PROT_NONE or had a protection key set that denied all access. We settled on 'unsigned long' for the type of the key here. We only need 4 bits on x86 today, but I figured that other architectures might need some more space. Semantically, we have a bit of a problem if we combine this syscall with our previously-introduced execute-only support: What do we do when we mix execute-only pkey use with pkey_mprotect() use? For instance: pkey_mprotect(ptr, PAGE_SIZE, PROT_WRITE, 6); // set pkey=6 mprotect(ptr, PAGE_SIZE, PROT_EXEC); // set pkey=X_ONLY_PKEY? mprotect(ptr, PAGE_SIZE, PROT_WRITE); // is pkey=6 again? To solve that, we make the plain-mprotect()-initiated execute-only support only apply to VMAs that have the default protection key (0) set on them. Proposed semantics: 1. protection key 0 is special and represents the default, "unassigned" protection key. It is always allocated. 2. mprotect() never affects a mapping's pkey_mprotect()-assigned protection key. A protection key of 0 (even if set explicitly) represents an unassigned protection key. 2a. mprotect(PROT_EXEC) on a mapping with an assigned protection key may or may not result in a mapping with execute-only properties. pkey_mprotect() plus pkey_set() on all threads should be used to _guarantee_ execute-only semantics if this is not a strong enough semantic. 3. mprotect(PROT_EXEC) may result in an "execute-only" mapping. The kernel will internally attempt to allocate and dedicate a protection key for the purpose of execute-only mappings. This may not be possible in cases where there are no free protection keys available. It can also happen, of course, in situations where there is no hardware support for protection keys. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163012.3DDD36C4@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 16:30:12 +00:00
SYSCALL_DEFINE4(pkey_mprotect, unsigned long, start, size_t, len,
unsigned long, prot, int, pkey)
{
return do_mprotect_pkey(start, len, prot, pkey);
}
x86/pkeys: Allocation/free syscalls This patch adds two new system calls: int pkey_alloc(unsigned long flags, unsigned long init_access_rights) int pkey_free(int pkey); These implement an "allocator" for the protection keys themselves, which can be thought of as analogous to the allocator that the kernel has for file descriptors. The kernel tracks which numbers are in use, and only allows operations on keys that are valid. A key which was not obtained by pkey_alloc() may not, for instance, be passed to pkey_mprotect(). These system calls are also very important given the kernel's use of pkeys to implement execute-only support. These help ensure that userspace can never assume that it has control of a key unless it first asks the kernel. The kernel does not promise to preserve PKRU (right register) contents except for allocated pkeys. The 'init_access_rights' argument to pkey_alloc() specifies the rights that will be established for the returned pkey. For instance: pkey = pkey_alloc(flags, PKEY_DENY_WRITE); will allocate 'pkey', but also sets the bits in PKRU[1] such that writing to 'pkey' is already denied. The kernel does not prevent pkey_free() from successfully freeing in-use pkeys (those still assigned to a memory range by pkey_mprotect()). It would be expensive to implement the checks for this, so we instead say, "Just don't do it" since sane software will never do it anyway. Any piece of userspace calling pkey_alloc() needs to be prepared for it to fail. Why? pkey_alloc() returns the same error code (ENOSPC) when there are no pkeys and when pkeys are unsupported. They can be unsupported for a whole host of reasons, so apps must be prepared for this. Also, libraries or LD_PRELOADs might steal keys before an application gets access to them. This allocation mechanism could be implemented in userspace. Even if we did it in userspace, we would still need additional user/kernel interfaces to tell userspace which keys are being used by the kernel internally (such as for execute-only mappings). Having the kernel provide this facility completely removes the need for these additional interfaces, or having an implementation of this in userspace at all. Note that we have to make changes to all of the architectures that do not use mman-common.h because we use the new PKEY_DENY_ACCESS/WRITE macros in arch-independent code. 1. PKRU is the Protection Key Rights User register. It is a usermode-accessible register that controls whether writes and/or access to each individual pkey is allowed or denied. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 16:30:15 +00:00
SYSCALL_DEFINE2(pkey_alloc, unsigned long, flags, unsigned long, init_val)
{
int pkey;
int ret;
/* No flags supported yet. */
if (flags)
return -EINVAL;
/* check for unsupported init values */
if (init_val & ~PKEY_ACCESS_MASK)
return -EINVAL;
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_write_lock(current->mm);
x86/pkeys: Allocation/free syscalls This patch adds two new system calls: int pkey_alloc(unsigned long flags, unsigned long init_access_rights) int pkey_free(int pkey); These implement an "allocator" for the protection keys themselves, which can be thought of as analogous to the allocator that the kernel has for file descriptors. The kernel tracks which numbers are in use, and only allows operations on keys that are valid. A key which was not obtained by pkey_alloc() may not, for instance, be passed to pkey_mprotect(). These system calls are also very important given the kernel's use of pkeys to implement execute-only support. These help ensure that userspace can never assume that it has control of a key unless it first asks the kernel. The kernel does not promise to preserve PKRU (right register) contents except for allocated pkeys. The 'init_access_rights' argument to pkey_alloc() specifies the rights that will be established for the returned pkey. For instance: pkey = pkey_alloc(flags, PKEY_DENY_WRITE); will allocate 'pkey', but also sets the bits in PKRU[1] such that writing to 'pkey' is already denied. The kernel does not prevent pkey_free() from successfully freeing in-use pkeys (those still assigned to a memory range by pkey_mprotect()). It would be expensive to implement the checks for this, so we instead say, "Just don't do it" since sane software will never do it anyway. Any piece of userspace calling pkey_alloc() needs to be prepared for it to fail. Why? pkey_alloc() returns the same error code (ENOSPC) when there are no pkeys and when pkeys are unsupported. They can be unsupported for a whole host of reasons, so apps must be prepared for this. Also, libraries or LD_PRELOADs might steal keys before an application gets access to them. This allocation mechanism could be implemented in userspace. Even if we did it in userspace, we would still need additional user/kernel interfaces to tell userspace which keys are being used by the kernel internally (such as for execute-only mappings). Having the kernel provide this facility completely removes the need for these additional interfaces, or having an implementation of this in userspace at all. Note that we have to make changes to all of the architectures that do not use mman-common.h because we use the new PKEY_DENY_ACCESS/WRITE macros in arch-independent code. 1. PKRU is the Protection Key Rights User register. It is a usermode-accessible register that controls whether writes and/or access to each individual pkey is allowed or denied. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 16:30:15 +00:00
pkey = mm_pkey_alloc(current->mm);
ret = -ENOSPC;
if (pkey == -1)
goto out;
ret = arch_set_user_pkey_access(current, pkey, init_val);
if (ret) {
mm_pkey_free(current->mm, pkey);
goto out;
}
ret = pkey;
out:
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_write_unlock(current->mm);
x86/pkeys: Allocation/free syscalls This patch adds two new system calls: int pkey_alloc(unsigned long flags, unsigned long init_access_rights) int pkey_free(int pkey); These implement an "allocator" for the protection keys themselves, which can be thought of as analogous to the allocator that the kernel has for file descriptors. The kernel tracks which numbers are in use, and only allows operations on keys that are valid. A key which was not obtained by pkey_alloc() may not, for instance, be passed to pkey_mprotect(). These system calls are also very important given the kernel's use of pkeys to implement execute-only support. These help ensure that userspace can never assume that it has control of a key unless it first asks the kernel. The kernel does not promise to preserve PKRU (right register) contents except for allocated pkeys. The 'init_access_rights' argument to pkey_alloc() specifies the rights that will be established for the returned pkey. For instance: pkey = pkey_alloc(flags, PKEY_DENY_WRITE); will allocate 'pkey', but also sets the bits in PKRU[1] such that writing to 'pkey' is already denied. The kernel does not prevent pkey_free() from successfully freeing in-use pkeys (those still assigned to a memory range by pkey_mprotect()). It would be expensive to implement the checks for this, so we instead say, "Just don't do it" since sane software will never do it anyway. Any piece of userspace calling pkey_alloc() needs to be prepared for it to fail. Why? pkey_alloc() returns the same error code (ENOSPC) when there are no pkeys and when pkeys are unsupported. They can be unsupported for a whole host of reasons, so apps must be prepared for this. Also, libraries or LD_PRELOADs might steal keys before an application gets access to them. This allocation mechanism could be implemented in userspace. Even if we did it in userspace, we would still need additional user/kernel interfaces to tell userspace which keys are being used by the kernel internally (such as for execute-only mappings). Having the kernel provide this facility completely removes the need for these additional interfaces, or having an implementation of this in userspace at all. Note that we have to make changes to all of the architectures that do not use mman-common.h because we use the new PKEY_DENY_ACCESS/WRITE macros in arch-independent code. 1. PKRU is the Protection Key Rights User register. It is a usermode-accessible register that controls whether writes and/or access to each individual pkey is allowed or denied. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 16:30:15 +00:00
return ret;
}
SYSCALL_DEFINE1(pkey_free, int, pkey)
{
int ret;
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_write_lock(current->mm);
x86/pkeys: Allocation/free syscalls This patch adds two new system calls: int pkey_alloc(unsigned long flags, unsigned long init_access_rights) int pkey_free(int pkey); These implement an "allocator" for the protection keys themselves, which can be thought of as analogous to the allocator that the kernel has for file descriptors. The kernel tracks which numbers are in use, and only allows operations on keys that are valid. A key which was not obtained by pkey_alloc() may not, for instance, be passed to pkey_mprotect(). These system calls are also very important given the kernel's use of pkeys to implement execute-only support. These help ensure that userspace can never assume that it has control of a key unless it first asks the kernel. The kernel does not promise to preserve PKRU (right register) contents except for allocated pkeys. The 'init_access_rights' argument to pkey_alloc() specifies the rights that will be established for the returned pkey. For instance: pkey = pkey_alloc(flags, PKEY_DENY_WRITE); will allocate 'pkey', but also sets the bits in PKRU[1] such that writing to 'pkey' is already denied. The kernel does not prevent pkey_free() from successfully freeing in-use pkeys (those still assigned to a memory range by pkey_mprotect()). It would be expensive to implement the checks for this, so we instead say, "Just don't do it" since sane software will never do it anyway. Any piece of userspace calling pkey_alloc() needs to be prepared for it to fail. Why? pkey_alloc() returns the same error code (ENOSPC) when there are no pkeys and when pkeys are unsupported. They can be unsupported for a whole host of reasons, so apps must be prepared for this. Also, libraries or LD_PRELOADs might steal keys before an application gets access to them. This allocation mechanism could be implemented in userspace. Even if we did it in userspace, we would still need additional user/kernel interfaces to tell userspace which keys are being used by the kernel internally (such as for execute-only mappings). Having the kernel provide this facility completely removes the need for these additional interfaces, or having an implementation of this in userspace at all. Note that we have to make changes to all of the architectures that do not use mman-common.h because we use the new PKEY_DENY_ACCESS/WRITE macros in arch-independent code. 1. PKRU is the Protection Key Rights User register. It is a usermode-accessible register that controls whether writes and/or access to each individual pkey is allowed or denied. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 16:30:15 +00:00
ret = mm_pkey_free(current->mm, pkey);
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_write_unlock(current->mm);
x86/pkeys: Allocation/free syscalls This patch adds two new system calls: int pkey_alloc(unsigned long flags, unsigned long init_access_rights) int pkey_free(int pkey); These implement an "allocator" for the protection keys themselves, which can be thought of as analogous to the allocator that the kernel has for file descriptors. The kernel tracks which numbers are in use, and only allows operations on keys that are valid. A key which was not obtained by pkey_alloc() may not, for instance, be passed to pkey_mprotect(). These system calls are also very important given the kernel's use of pkeys to implement execute-only support. These help ensure that userspace can never assume that it has control of a key unless it first asks the kernel. The kernel does not promise to preserve PKRU (right register) contents except for allocated pkeys. The 'init_access_rights' argument to pkey_alloc() specifies the rights that will be established for the returned pkey. For instance: pkey = pkey_alloc(flags, PKEY_DENY_WRITE); will allocate 'pkey', but also sets the bits in PKRU[1] such that writing to 'pkey' is already denied. The kernel does not prevent pkey_free() from successfully freeing in-use pkeys (those still assigned to a memory range by pkey_mprotect()). It would be expensive to implement the checks for this, so we instead say, "Just don't do it" since sane software will never do it anyway. Any piece of userspace calling pkey_alloc() needs to be prepared for it to fail. Why? pkey_alloc() returns the same error code (ENOSPC) when there are no pkeys and when pkeys are unsupported. They can be unsupported for a whole host of reasons, so apps must be prepared for this. Also, libraries or LD_PRELOADs might steal keys before an application gets access to them. This allocation mechanism could be implemented in userspace. Even if we did it in userspace, we would still need additional user/kernel interfaces to tell userspace which keys are being used by the kernel internally (such as for execute-only mappings). Having the kernel provide this facility completely removes the need for these additional interfaces, or having an implementation of this in userspace at all. Note that we have to make changes to all of the architectures that do not use mman-common.h because we use the new PKEY_DENY_ACCESS/WRITE macros in arch-independent code. 1. PKRU is the Protection Key Rights User register. It is a usermode-accessible register that controls whether writes and/or access to each individual pkey is allowed or denied. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 16:30:15 +00:00
/*
* We could provide warnings or errors if any VMA still
x86/pkeys: Allocation/free syscalls This patch adds two new system calls: int pkey_alloc(unsigned long flags, unsigned long init_access_rights) int pkey_free(int pkey); These implement an "allocator" for the protection keys themselves, which can be thought of as analogous to the allocator that the kernel has for file descriptors. The kernel tracks which numbers are in use, and only allows operations on keys that are valid. A key which was not obtained by pkey_alloc() may not, for instance, be passed to pkey_mprotect(). These system calls are also very important given the kernel's use of pkeys to implement execute-only support. These help ensure that userspace can never assume that it has control of a key unless it first asks the kernel. The kernel does not promise to preserve PKRU (right register) contents except for allocated pkeys. The 'init_access_rights' argument to pkey_alloc() specifies the rights that will be established for the returned pkey. For instance: pkey = pkey_alloc(flags, PKEY_DENY_WRITE); will allocate 'pkey', but also sets the bits in PKRU[1] such that writing to 'pkey' is already denied. The kernel does not prevent pkey_free() from successfully freeing in-use pkeys (those still assigned to a memory range by pkey_mprotect()). It would be expensive to implement the checks for this, so we instead say, "Just don't do it" since sane software will never do it anyway. Any piece of userspace calling pkey_alloc() needs to be prepared for it to fail. Why? pkey_alloc() returns the same error code (ENOSPC) when there are no pkeys and when pkeys are unsupported. They can be unsupported for a whole host of reasons, so apps must be prepared for this. Also, libraries or LD_PRELOADs might steal keys before an application gets access to them. This allocation mechanism could be implemented in userspace. Even if we did it in userspace, we would still need additional user/kernel interfaces to tell userspace which keys are being used by the kernel internally (such as for execute-only mappings). Having the kernel provide this facility completely removes the need for these additional interfaces, or having an implementation of this in userspace at all. Note that we have to make changes to all of the architectures that do not use mman-common.h because we use the new PKEY_DENY_ACCESS/WRITE macros in arch-independent code. 1. PKRU is the Protection Key Rights User register. It is a usermode-accessible register that controls whether writes and/or access to each individual pkey is allowed or denied. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 16:30:15 +00:00
* has the pkey set here.
*/
return ret;
}
#endif /* CONFIG_ARCH_HAS_PKEYS */