linux-stable/arch/arm/mach-omap2/gpmc.c

1771 lines
46 KiB
C
Raw Normal View History

/*
* GPMC support functions
*
* Copyright (C) 2005-2006 Nokia Corporation
*
* Author: Juha Yrjola
*
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#undef DEBUG
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_mtd.h>
#include <linux/of_device.h>
#include <linux/mtd/nand.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include <asm/mach-types.h>
ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-31 17:59:07 +00:00
#include "soc.h"
#include "common.h"
#include "omap_device.h"
#include "gpmc.h"
#include "gpmc-nand.h"
#include "gpmc-onenand.h"
#define DEVICE_NAME "omap-gpmc"
/* GPMC register offsets */
#define GPMC_REVISION 0x00
#define GPMC_SYSCONFIG 0x10
#define GPMC_SYSSTATUS 0x14
#define GPMC_IRQSTATUS 0x18
#define GPMC_IRQENABLE 0x1c
#define GPMC_TIMEOUT_CONTROL 0x40
#define GPMC_ERR_ADDRESS 0x44
#define GPMC_ERR_TYPE 0x48
#define GPMC_CONFIG 0x50
#define GPMC_STATUS 0x54
#define GPMC_PREFETCH_CONFIG1 0x1e0
#define GPMC_PREFETCH_CONFIG2 0x1e4
#define GPMC_PREFETCH_CONTROL 0x1ec
#define GPMC_PREFETCH_STATUS 0x1f0
#define GPMC_ECC_CONFIG 0x1f4
#define GPMC_ECC_CONTROL 0x1f8
#define GPMC_ECC_SIZE_CONFIG 0x1fc
#define GPMC_ECC1_RESULT 0x200
#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */
#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */
#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */
#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */
/* GPMC ECC control settings */
#define GPMC_ECC_CTRL_ECCCLEAR 0x100
#define GPMC_ECC_CTRL_ECCDISABLE 0x000
#define GPMC_ECC_CTRL_ECCREG1 0x001
#define GPMC_ECC_CTRL_ECCREG2 0x002
#define GPMC_ECC_CTRL_ECCREG3 0x003
#define GPMC_ECC_CTRL_ECCREG4 0x004
#define GPMC_ECC_CTRL_ECCREG5 0x005
#define GPMC_ECC_CTRL_ECCREG6 0x006
#define GPMC_ECC_CTRL_ECCREG7 0x007
#define GPMC_ECC_CTRL_ECCREG8 0x008
#define GPMC_ECC_CTRL_ECCREG9 0x009
#define GPMC_CONFIG2_CSEXTRADELAY BIT(7)
#define GPMC_CONFIG3_ADVEXTRADELAY BIT(7)
#define GPMC_CONFIG4_OEEXTRADELAY BIT(7)
#define GPMC_CONFIG4_WEEXTRADELAY BIT(23)
#define GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN BIT(6)
#define GPMC_CONFIG6_CYCLE2CYCLESAMECSEN BIT(7)
#define GPMC_CS0_OFFSET 0x60
#define GPMC_CS_SIZE 0x30
#define GPMC_BCH_SIZE 0x10
#define GPMC_MEM_END 0x3FFFFFFF
#define GPMC_CHUNK_SHIFT 24 /* 16 MB */
#define GPMC_SECTION_SHIFT 28 /* 128 MB */
#define CS_NUM_SHIFT 24
#define ENABLE_PREFETCH (0x1 << 7)
#define DMA_MPU_MODE 2
#define GPMC_REVISION_MAJOR(l) ((l >> 4) & 0xf)
#define GPMC_REVISION_MINOR(l) (l & 0xf)
#define GPMC_HAS_WR_ACCESS 0x1
#define GPMC_HAS_WR_DATA_MUX_BUS 0x2
#define GPMC_HAS_MUX_AAD 0x4
#define GPMC_NR_WAITPINS 4
/* XXX: Only NAND irq has been considered,currently these are the only ones used
*/
#define GPMC_NR_IRQ 2
struct gpmc_client_irq {
unsigned irq;
u32 bitmask;
};
/* Structure to save gpmc cs context */
struct gpmc_cs_config {
u32 config1;
u32 config2;
u32 config3;
u32 config4;
u32 config5;
u32 config6;
u32 config7;
int is_valid;
};
/*
* Structure to save/restore gpmc context
* to support core off on OMAP3
*/
struct omap3_gpmc_regs {
u32 sysconfig;
u32 irqenable;
u32 timeout_ctrl;
u32 config;
u32 prefetch_config1;
u32 prefetch_config2;
u32 prefetch_control;
struct gpmc_cs_config cs_context[GPMC_CS_NUM];
};
static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
static struct irq_chip gpmc_irq_chip;
static unsigned gpmc_irq_start;
static struct resource gpmc_mem_root;
static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
/* Define chip-selects as reserved by default until probe completes */
static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1);
static unsigned int gpmc_nr_waitpins;
static struct device *gpmc_dev;
static int gpmc_irq;
static resource_size_t phys_base, mem_size;
static unsigned gpmc_capability;
static void __iomem *gpmc_base;
static struct clk *gpmc_l3_clk;
static irqreturn_t gpmc_handle_irq(int irq, void *dev);
static void gpmc_write_reg(int idx, u32 val)
{
__raw_writel(val, gpmc_base + idx);
}
static u32 gpmc_read_reg(int idx)
{
return __raw_readl(gpmc_base + idx);
}
void gpmc_cs_write_reg(int cs, int idx, u32 val)
{
void __iomem *reg_addr;
reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
__raw_writel(val, reg_addr);
}
static u32 gpmc_cs_read_reg(int cs, int idx)
{
void __iomem *reg_addr;
reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
return __raw_readl(reg_addr);
}
/* TODO: Add support for gpmc_fck to clock framework and use it */
static unsigned long gpmc_get_fclk_period(void)
{
unsigned long rate = clk_get_rate(gpmc_l3_clk);
if (rate == 0) {
printk(KERN_WARNING "gpmc_l3_clk not enabled\n");
return 0;
}
rate /= 1000;
rate = 1000000000 / rate; /* In picoseconds */
return rate;
}
static unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
{
unsigned long tick_ps;
/* Calculate in picosecs to yield more exact results */
tick_ps = gpmc_get_fclk_period();
return (time_ns * 1000 + tick_ps - 1) / tick_ps;
}
static unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
{
unsigned long tick_ps;
/* Calculate in picosecs to yield more exact results */
tick_ps = gpmc_get_fclk_period();
return (time_ps + tick_ps - 1) / tick_ps;
}
unsigned int gpmc_ticks_to_ns(unsigned int ticks)
{
return ticks * gpmc_get_fclk_period() / 1000;
}
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
static unsigned int gpmc_ticks_to_ps(unsigned int ticks)
{
return ticks * gpmc_get_fclk_period();
}
static unsigned int gpmc_round_ps_to_ticks(unsigned int time_ps)
{
unsigned long ticks = gpmc_ps_to_ticks(time_ps);
return ticks * gpmc_get_fclk_period();
}
static inline void gpmc_cs_modify_reg(int cs, int reg, u32 mask, bool value)
{
u32 l;
l = gpmc_cs_read_reg(cs, reg);
if (value)
l |= mask;
else
l &= ~mask;
gpmc_cs_write_reg(cs, reg, l);
}
static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p)
{
gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG1,
GPMC_CONFIG1_TIME_PARA_GRAN,
p->time_para_granularity);
gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG2,
GPMC_CONFIG2_CSEXTRADELAY, p->cs_extra_delay);
gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG3,
GPMC_CONFIG3_ADVEXTRADELAY, p->adv_extra_delay);
gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4,
GPMC_CONFIG4_OEEXTRADELAY, p->oe_extra_delay);
gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4,
GPMC_CONFIG4_OEEXTRADELAY, p->we_extra_delay);
gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6,
GPMC_CONFIG6_CYCLE2CYCLESAMECSEN,
p->cycle2cyclesamecsen);
gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6,
GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN,
p->cycle2cyclediffcsen);
}
#ifdef DEBUG
static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
int time, const char *name)
#else
static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
int time)
#endif
{
u32 l;
int ticks, mask, nr_bits;
if (time == 0)
ticks = 0;
else
ticks = gpmc_ns_to_ticks(time);
nr_bits = end_bit - st_bit + 1;
if (ticks >= 1 << nr_bits) {
#ifdef DEBUG
printk(KERN_INFO "GPMC CS%d: %-10s* %3d ns, %3d ticks >= %d\n",
cs, name, time, ticks, 1 << nr_bits);
#endif
return -1;
}
mask = (1 << nr_bits) - 1;
l = gpmc_cs_read_reg(cs, reg);
#ifdef DEBUG
printk(KERN_INFO
"GPMC CS%d: %-10s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n",
cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000,
(l >> st_bit) & mask, time);
#endif
l &= ~(mask << st_bit);
l |= ticks << st_bit;
gpmc_cs_write_reg(cs, reg, l);
return 0;
}
#ifdef DEBUG
#define GPMC_SET_ONE(reg, st, end, field) \
if (set_gpmc_timing_reg(cs, (reg), (st), (end), \
t->field, #field) < 0) \
return -1
#else
#define GPMC_SET_ONE(reg, st, end, field) \
if (set_gpmc_timing_reg(cs, (reg), (st), (end), t->field) < 0) \
return -1
#endif
int gpmc_calc_divider(unsigned int sync_clk)
{
int div;
u32 l;
l = sync_clk + (gpmc_get_fclk_period() - 1);
div = l / gpmc_get_fclk_period();
if (div > 4)
return -1;
if (div <= 0)
div = 1;
return div;
}
int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
{
int div;
u32 l;
div = gpmc_calc_divider(t->sync_clk);
if (div < 0)
ARM: OMAP: clean up some smatch warnings, fix some printk(KERN_ERR ... Resolve the following warnings from smatch: arch/arm/mach-omap2/gpmc.c:282 gpmc_cs_set_timings() info: why not propagate 'div' from gpmc_cs_calc_divider() instead of -1? arch/arm/mach-omap2/serial.c:328 omap_serial_init_port() error: 'pdev' dereferencing possible ERR_PTR() arch/arm/mach-omap2/timer.c:213 omap2_gp_clockevent_init() Error invalid range 4096 to -1 arch/arm/mach-omap2/gpio.c:63 omap2_gpio_dev_init() warn: possible memory leak of 'pdata' arch/arm/mach-omap2/omap_hwmod.c:1478 _assert_hardreset() warn: assigning -22 to unsigned variable 'ret' arch/arm/mach-omap2/omap_hwmod.c:1487 _assert_hardreset() warn: 4294963201 is more than 255 (max '(ret)' can be) so this is always the same. arch/arm/mach-omap2/omap_hwmod.c:1545 _read_hardreset() warn: assigning -22 to unsigned variable 'ret' arch/arm/mach-omap2/omap_hwmod.c:1554 _read_hardreset() warn: 4294963201 is more than 255 (max '(ret)' can be) so this is always the same. arch/arm/mach-omap2/dpll3xxx.c:629 omap3_clkoutx2_recalc() error: we previously assumed 'pclk' could be null (see line 627) arch/arm/mach-omap2/board-n8x0.c:422 n8x0_mmc_late_init() Error invalid range 14 to 13 arch/arm/mach-omap1/leds-h2p2-debug.c:71 h2p2_dbg_leds_event() error: potentially derefencing uninitialized 'fpga'. arch/arm/plat-omap/mux.c:79 omap_cfg_reg() Error invalid range 4096 to -1 Thanks to Tony Lindgren <tony@atomide.com> for pointing out that BUG() can be disabled. The changes in the first version that removed the subsequent return() after BUG() states have been dropped. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2012-08-03 15:21:10 +00:00
return div;
GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on);
GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off);
GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off);
GPMC_SET_ONE(GPMC_CS_CONFIG3, 0, 3, adv_on);
GPMC_SET_ONE(GPMC_CS_CONFIG3, 8, 12, adv_rd_off);
GPMC_SET_ONE(GPMC_CS_CONFIG3, 16, 20, adv_wr_off);
GPMC_SET_ONE(GPMC_CS_CONFIG4, 0, 3, oe_on);
GPMC_SET_ONE(GPMC_CS_CONFIG4, 8, 12, oe_off);
GPMC_SET_ONE(GPMC_CS_CONFIG4, 16, 19, we_on);
GPMC_SET_ONE(GPMC_CS_CONFIG4, 24, 28, we_off);
GPMC_SET_ONE(GPMC_CS_CONFIG5, 0, 4, rd_cycle);
GPMC_SET_ONE(GPMC_CS_CONFIG5, 8, 12, wr_cycle);
GPMC_SET_ONE(GPMC_CS_CONFIG5, 16, 20, access);
GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
GPMC_SET_ONE(GPMC_CS_CONFIG6, 0, 3, bus_turnaround);
GPMC_SET_ONE(GPMC_CS_CONFIG6, 8, 11, cycle2cycle_delay);
GPMC_SET_ONE(GPMC_CS_CONFIG1, 18, 19, wait_monitoring);
GPMC_SET_ONE(GPMC_CS_CONFIG1, 25, 26, clk_activation);
if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
if (gpmc_capability & GPMC_HAS_WR_ACCESS)
GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
/* caller is expected to have initialized CONFIG1 to cover
* at least sync vs async
*/
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
if (l & (GPMC_CONFIG1_READTYPE_SYNC | GPMC_CONFIG1_WRITETYPE_SYNC)) {
#ifdef DEBUG
printk(KERN_INFO "GPMC CS%d CLK period is %lu ns (div %d)\n",
cs, (div * gpmc_get_fclk_period()) / 1000, div);
#endif
l &= ~0x03;
l |= (div - 1);
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);
}
gpmc_cs_bool_timings(cs, &t->bool_timings);
return 0;
}
static int gpmc_cs_enable_mem(int cs, u32 base, u32 size)
{
u32 l;
u32 mask;
/*
* Ensure that base address is aligned on a
* boundary equal to or greater than size.
*/
if (base & (size - 1))
return -EINVAL;
mask = (1 << GPMC_SECTION_SHIFT) - size;
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
l &= ~0x3f;
l = (base >> GPMC_CHUNK_SHIFT) & 0x3f;
l &= ~(0x0f << 8);
l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
l |= GPMC_CONFIG7_CSVALID;
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
return 0;
}
static void gpmc_cs_disable_mem(int cs)
{
u32 l;
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
l &= ~GPMC_CONFIG7_CSVALID;
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
}
static void gpmc_cs_get_memconf(int cs, u32 *base, u32 *size)
{
u32 l;
u32 mask;
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
*base = (l & 0x3f) << GPMC_CHUNK_SHIFT;
mask = (l >> 8) & 0x0f;
*size = (1 << GPMC_SECTION_SHIFT) - (mask << GPMC_CHUNK_SHIFT);
}
static int gpmc_cs_mem_enabled(int cs)
{
u32 l;
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
return l & GPMC_CONFIG7_CSVALID;
}
static void gpmc_cs_set_reserved(int cs, int reserved)
{
gpmc_cs_map &= ~(1 << cs);
gpmc_cs_map |= (reserved ? 1 : 0) << cs;
}
static bool gpmc_cs_reserved(int cs)
{
return gpmc_cs_map & (1 << cs);
}
static unsigned long gpmc_mem_align(unsigned long size)
{
int order;
size = (size - 1) >> (GPMC_CHUNK_SHIFT - 1);
order = GPMC_CHUNK_SHIFT - 1;
do {
size >>= 1;
order++;
} while (size);
size = 1 << order;
return size;
}
static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size)
{
struct resource *res = &gpmc_cs_mem[cs];
int r;
size = gpmc_mem_align(size);
spin_lock(&gpmc_mem_lock);
res->start = base;
res->end = base + size - 1;
r = request_resource(&gpmc_mem_root, res);
spin_unlock(&gpmc_mem_lock);
return r;
}
static int gpmc_cs_delete_mem(int cs)
{
struct resource *res = &gpmc_cs_mem[cs];
int r;
spin_lock(&gpmc_mem_lock);
r = release_resource(&gpmc_cs_mem[cs]);
res->start = 0;
res->end = 0;
spin_unlock(&gpmc_mem_lock);
return r;
}
/**
* gpmc_cs_remap - remaps a chip-select physical base address
* @cs: chip-select to remap
* @base: physical base address to re-map chip-select to
*
* Re-maps a chip-select to a new physical base address specified by
* "base". Returns 0 on success and appropriate negative error code
* on failure.
*/
static int gpmc_cs_remap(int cs, u32 base)
{
int ret;
u32 old_base, size;
if (cs > GPMC_CS_NUM)
return -ENODEV;
gpmc_cs_get_memconf(cs, &old_base, &size);
if (base == old_base)
return 0;
gpmc_cs_disable_mem(cs);
ret = gpmc_cs_delete_mem(cs);
if (ret < 0)
return ret;
ret = gpmc_cs_insert_mem(cs, base, size);
if (ret < 0)
return ret;
ret = gpmc_cs_enable_mem(cs, base, size);
if (ret < 0)
return ret;
return 0;
}
int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
{
struct resource *res = &gpmc_cs_mem[cs];
int r = -1;
if (cs > GPMC_CS_NUM)
return -ENODEV;
size = gpmc_mem_align(size);
if (size > (1 << GPMC_SECTION_SHIFT))
return -ENOMEM;
spin_lock(&gpmc_mem_lock);
if (gpmc_cs_reserved(cs)) {
r = -EBUSY;
goto out;
}
if (gpmc_cs_mem_enabled(cs))
r = adjust_resource(res, res->start & ~(size - 1), size);
if (r < 0)
r = allocate_resource(&gpmc_mem_root, res, size, 0, ~0,
size, NULL, NULL);
if (r < 0)
goto out;
r = gpmc_cs_enable_mem(cs, res->start, resource_size(res));
if (r < 0) {
release_resource(res);
goto out;
}
*base = res->start;
gpmc_cs_set_reserved(cs, 1);
out:
spin_unlock(&gpmc_mem_lock);
return r;
}
EXPORT_SYMBOL(gpmc_cs_request);
void gpmc_cs_free(int cs)
{
spin_lock(&gpmc_mem_lock);
if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) {
printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
BUG();
spin_unlock(&gpmc_mem_lock);
return;
}
gpmc_cs_disable_mem(cs);
release_resource(&gpmc_cs_mem[cs]);
gpmc_cs_set_reserved(cs, 0);
spin_unlock(&gpmc_mem_lock);
}
EXPORT_SYMBOL(gpmc_cs_free);
/**
* gpmc_configure - write request to configure gpmc
* @cmd: command type
* @wval: value to write
* @return status of the operation
*/
int gpmc_configure(int cmd, int wval)
{
u32 regval;
switch (cmd) {
case GPMC_ENABLE_IRQ:
gpmc_write_reg(GPMC_IRQENABLE, wval);
break;
case GPMC_SET_IRQ_STATUS:
gpmc_write_reg(GPMC_IRQSTATUS, wval);
break;
case GPMC_CONFIG_WP:
regval = gpmc_read_reg(GPMC_CONFIG);
if (wval)
regval &= ~GPMC_CONFIG_WRITEPROTECT; /* WP is ON */
else
regval |= GPMC_CONFIG_WRITEPROTECT; /* WP is OFF */
gpmc_write_reg(GPMC_CONFIG, regval);
break;
default:
pr_err("%s: command not supported\n", __func__);
return -EINVAL;
}
return 0;
}
EXPORT_SYMBOL(gpmc_configure);
void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
{
int i;
reg->gpmc_status = gpmc_base + GPMC_STATUS;
reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET +
GPMC_CS_NAND_ADDRESS + GPMC_CS_SIZE * cs;
reg->gpmc_nand_data = gpmc_base + GPMC_CS0_OFFSET +
GPMC_CS_NAND_DATA + GPMC_CS_SIZE * cs;
reg->gpmc_prefetch_config1 = gpmc_base + GPMC_PREFETCH_CONFIG1;
reg->gpmc_prefetch_config2 = gpmc_base + GPMC_PREFETCH_CONFIG2;
reg->gpmc_prefetch_control = gpmc_base + GPMC_PREFETCH_CONTROL;
reg->gpmc_prefetch_status = gpmc_base + GPMC_PREFETCH_STATUS;
reg->gpmc_ecc_config = gpmc_base + GPMC_ECC_CONFIG;
reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) {
reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 +
GPMC_BCH_SIZE * i;
reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 +
GPMC_BCH_SIZE * i;
reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 +
GPMC_BCH_SIZE * i;
reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 +
GPMC_BCH_SIZE * i;
}
}
int gpmc_get_client_irq(unsigned irq_config)
{
int i;
if (hweight32(irq_config) > 1)
return 0;
for (i = 0; i < GPMC_NR_IRQ; i++)
if (gpmc_client_irq[i].bitmask & irq_config)
return gpmc_client_irq[i].irq;
return 0;
}
static int gpmc_irq_endis(unsigned irq, bool endis)
{
int i;
u32 regval;
for (i = 0; i < GPMC_NR_IRQ; i++)
if (irq == gpmc_client_irq[i].irq) {
regval = gpmc_read_reg(GPMC_IRQENABLE);
if (endis)
regval |= gpmc_client_irq[i].bitmask;
else
regval &= ~gpmc_client_irq[i].bitmask;
gpmc_write_reg(GPMC_IRQENABLE, regval);
break;
}
return 0;
}
static void gpmc_irq_disable(struct irq_data *p)
{
gpmc_irq_endis(p->irq, false);
}
static void gpmc_irq_enable(struct irq_data *p)
{
gpmc_irq_endis(p->irq, true);
}
static void gpmc_irq_noop(struct irq_data *data) { }
static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; }
static int gpmc_setup_irq(void)
{
int i;
u32 regval;
if (!gpmc_irq)
return -EINVAL;
gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0);
if (gpmc_irq_start < 0) {
pr_err("irq_alloc_descs failed\n");
return gpmc_irq_start;
}
gpmc_irq_chip.name = "gpmc";
gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret;
gpmc_irq_chip.irq_enable = gpmc_irq_enable;
gpmc_irq_chip.irq_disable = gpmc_irq_disable;
gpmc_irq_chip.irq_shutdown = gpmc_irq_noop;
gpmc_irq_chip.irq_ack = gpmc_irq_noop;
gpmc_irq_chip.irq_mask = gpmc_irq_noop;
gpmc_irq_chip.irq_unmask = gpmc_irq_noop;
gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE;
gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT;
for (i = 0; i < GPMC_NR_IRQ; i++) {
gpmc_client_irq[i].irq = gpmc_irq_start + i;
irq_set_chip_and_handler(gpmc_client_irq[i].irq,
&gpmc_irq_chip, handle_simple_irq);
set_irq_flags(gpmc_client_irq[i].irq,
IRQF_VALID | IRQF_NOAUTOEN);
}
/* Disable interrupts */
gpmc_write_reg(GPMC_IRQENABLE, 0);
/* clear interrupts */
regval = gpmc_read_reg(GPMC_IRQSTATUS);
gpmc_write_reg(GPMC_IRQSTATUS, regval);
return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
}
static int gpmc_free_irq(void)
{
int i;
if (gpmc_irq)
free_irq(gpmc_irq, NULL);
for (i = 0; i < GPMC_NR_IRQ; i++) {
irq_set_handler(gpmc_client_irq[i].irq, NULL);
irq_set_chip(gpmc_client_irq[i].irq, &no_irq_chip);
irq_modify_status(gpmc_client_irq[i].irq, 0, 0);
}
irq_free_descs(gpmc_irq_start, GPMC_NR_IRQ);
return 0;
}
static void gpmc_mem_exit(void)
{
int cs;
for (cs = 0; cs < GPMC_CS_NUM; cs++) {
if (!gpmc_cs_mem_enabled(cs))
continue;
gpmc_cs_delete_mem(cs);
}
}
static void gpmc_mem_init(void)
{
int cs;
/*
* The first 1MB of GPMC address space is typically mapped to
* the internal ROM. Never allocate the first page, to
* facilitate bug detection; even if we didn't boot from ROM.
*/
gpmc_mem_root.start = SZ_1M;
gpmc_mem_root.end = GPMC_MEM_END;
/* Reserve all regions that has been set up by bootloader */
for (cs = 0; cs < GPMC_CS_NUM; cs++) {
u32 base, size;
if (!gpmc_cs_mem_enabled(cs))
continue;
gpmc_cs_get_memconf(cs, &base, &size);
if (gpmc_cs_insert_mem(cs, base, size)) {
pr_warn("%s: disabling cs %d mapped at 0x%x-0x%x\n",
__func__, cs, base, base + size);
gpmc_cs_disable_mem(cs);
}
}
}
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk)
{
u32 temp;
int div;
div = gpmc_calc_divider(sync_clk);
temp = gpmc_ps_to_ticks(time_ps);
temp = (temp + div - 1) / div;
return gpmc_ticks_to_ps(temp * div);
}
/* XXX: can the cycles be avoided ? */
static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t,
struct gpmc_device_timings *dev_t,
bool mux)
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
{
u32 temp;
/* adv_rd_off */
temp = dev_t->t_avdp_r;
/* XXX: mux check required ? */
if (mux) {
/* XXX: t_avdp not to be required for sync, only added for tusb
* this indirectly necessitates requirement of t_avdp_r and
* t_avdp_w instead of having a single t_avdp
*/
temp = max_t(u32, temp, gpmc_t->clk_activation + dev_t->t_avdh);
temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
}
gpmc_t->adv_rd_off = gpmc_round_ps_to_ticks(temp);
/* oe_on */
temp = dev_t->t_oeasu; /* XXX: remove this ? */
if (mux) {
temp = max_t(u32, temp, gpmc_t->clk_activation + dev_t->t_ach);
temp = max_t(u32, temp, gpmc_t->adv_rd_off +
gpmc_ticks_to_ps(dev_t->cyc_aavdh_oe));
}
gpmc_t->oe_on = gpmc_round_ps_to_ticks(temp);
/* access */
/* XXX: any scope for improvement ?, by combining oe_on
* and clk_activation, need to check whether
* access = clk_activation + round to sync clk ?
*/
temp = max_t(u32, dev_t->t_iaa, dev_t->cyc_iaa * gpmc_t->sync_clk);
temp += gpmc_t->clk_activation;
if (dev_t->cyc_oe)
temp = max_t(u32, temp, gpmc_t->oe_on +
gpmc_ticks_to_ps(dev_t->cyc_oe));
gpmc_t->access = gpmc_round_ps_to_ticks(temp);
gpmc_t->oe_off = gpmc_t->access + gpmc_ticks_to_ps(1);
gpmc_t->cs_rd_off = gpmc_t->oe_off;
/* rd_cycle */
temp = max_t(u32, dev_t->t_cez_r, dev_t->t_oez);
temp = gpmc_round_ps_to_sync_clk(temp, gpmc_t->sync_clk) +
gpmc_t->access;
/* XXX: barter t_ce_rdyz with t_cez_r ? */
if (dev_t->t_ce_rdyz)
temp = max_t(u32, temp, gpmc_t->cs_rd_off + dev_t->t_ce_rdyz);
gpmc_t->rd_cycle = gpmc_round_ps_to_ticks(temp);
return 0;
}
static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t,
struct gpmc_device_timings *dev_t,
bool mux)
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
{
u32 temp;
/* adv_wr_off */
temp = dev_t->t_avdp_w;
if (mux) {
temp = max_t(u32, temp,
gpmc_t->clk_activation + dev_t->t_avdh);
temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
}
gpmc_t->adv_wr_off = gpmc_round_ps_to_ticks(temp);
/* wr_data_mux_bus */
temp = max_t(u32, dev_t->t_weasu,
gpmc_t->clk_activation + dev_t->t_rdyo);
/* XXX: shouldn't mux be kept as a whole for wr_data_mux_bus ?,
* and in that case remember to handle we_on properly
*/
if (mux) {
temp = max_t(u32, temp,
gpmc_t->adv_wr_off + dev_t->t_aavdh);
temp = max_t(u32, temp, gpmc_t->adv_wr_off +
gpmc_ticks_to_ps(dev_t->cyc_aavdh_we));
}
gpmc_t->wr_data_mux_bus = gpmc_round_ps_to_ticks(temp);
/* we_on */
if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
gpmc_t->we_on = gpmc_round_ps_to_ticks(dev_t->t_weasu);
else
gpmc_t->we_on = gpmc_t->wr_data_mux_bus;
/* wr_access */
/* XXX: gpmc_capability check reqd ? , even if not, will not harm */
gpmc_t->wr_access = gpmc_t->access;
/* we_off */
temp = gpmc_t->we_on + dev_t->t_wpl;
temp = max_t(u32, temp,
gpmc_t->wr_access + gpmc_ticks_to_ps(1));
temp = max_t(u32, temp,
gpmc_t->we_on + gpmc_ticks_to_ps(dev_t->cyc_wpl));
gpmc_t->we_off = gpmc_round_ps_to_ticks(temp);
gpmc_t->cs_wr_off = gpmc_round_ps_to_ticks(gpmc_t->we_off +
dev_t->t_wph);
/* wr_cycle */
temp = gpmc_round_ps_to_sync_clk(dev_t->t_cez_w, gpmc_t->sync_clk);
temp += gpmc_t->wr_access;
/* XXX: barter t_ce_rdyz with t_cez_w ? */
if (dev_t->t_ce_rdyz)
temp = max_t(u32, temp,
gpmc_t->cs_wr_off + dev_t->t_ce_rdyz);
gpmc_t->wr_cycle = gpmc_round_ps_to_ticks(temp);
return 0;
}
static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t,
struct gpmc_device_timings *dev_t,
bool mux)
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
{
u32 temp;
/* adv_rd_off */
temp = dev_t->t_avdp_r;
if (mux)
temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
gpmc_t->adv_rd_off = gpmc_round_ps_to_ticks(temp);
/* oe_on */
temp = dev_t->t_oeasu;
if (mux)
temp = max_t(u32, temp,
gpmc_t->adv_rd_off + dev_t->t_aavdh);
gpmc_t->oe_on = gpmc_round_ps_to_ticks(temp);
/* access */
temp = max_t(u32, dev_t->t_iaa, /* XXX: remove t_iaa in async ? */
gpmc_t->oe_on + dev_t->t_oe);
temp = max_t(u32, temp,
gpmc_t->cs_on + dev_t->t_ce);
temp = max_t(u32, temp,
gpmc_t->adv_on + dev_t->t_aa);
gpmc_t->access = gpmc_round_ps_to_ticks(temp);
gpmc_t->oe_off = gpmc_t->access + gpmc_ticks_to_ps(1);
gpmc_t->cs_rd_off = gpmc_t->oe_off;
/* rd_cycle */
temp = max_t(u32, dev_t->t_rd_cycle,
gpmc_t->cs_rd_off + dev_t->t_cez_r);
temp = max_t(u32, temp, gpmc_t->oe_off + dev_t->t_oez);
gpmc_t->rd_cycle = gpmc_round_ps_to_ticks(temp);
return 0;
}
static int gpmc_calc_async_write_timings(struct gpmc_timings *gpmc_t,
struct gpmc_device_timings *dev_t,
bool mux)
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
{
u32 temp;
/* adv_wr_off */
temp = dev_t->t_avdp_w;
if (mux)
temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
gpmc_t->adv_wr_off = gpmc_round_ps_to_ticks(temp);
/* wr_data_mux_bus */
temp = dev_t->t_weasu;
if (mux) {
temp = max_t(u32, temp, gpmc_t->adv_wr_off + dev_t->t_aavdh);
temp = max_t(u32, temp, gpmc_t->adv_wr_off +
gpmc_ticks_to_ps(dev_t->cyc_aavdh_we));
}
gpmc_t->wr_data_mux_bus = gpmc_round_ps_to_ticks(temp);
/* we_on */
if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
gpmc_t->we_on = gpmc_round_ps_to_ticks(dev_t->t_weasu);
else
gpmc_t->we_on = gpmc_t->wr_data_mux_bus;
/* we_off */
temp = gpmc_t->we_on + dev_t->t_wpl;
gpmc_t->we_off = gpmc_round_ps_to_ticks(temp);
gpmc_t->cs_wr_off = gpmc_round_ps_to_ticks(gpmc_t->we_off +
dev_t->t_wph);
/* wr_cycle */
temp = max_t(u32, dev_t->t_wr_cycle,
gpmc_t->cs_wr_off + dev_t->t_cez_w);
gpmc_t->wr_cycle = gpmc_round_ps_to_ticks(temp);
return 0;
}
static int gpmc_calc_sync_common_timings(struct gpmc_timings *gpmc_t,
struct gpmc_device_timings *dev_t)
{
u32 temp;
gpmc_t->sync_clk = gpmc_calc_divider(dev_t->clk) *
gpmc_get_fclk_period();
gpmc_t->page_burst_access = gpmc_round_ps_to_sync_clk(
dev_t->t_bacc,
gpmc_t->sync_clk);
temp = max_t(u32, dev_t->t_ces, dev_t->t_avds);
gpmc_t->clk_activation = gpmc_round_ps_to_ticks(temp);
if (gpmc_calc_divider(gpmc_t->sync_clk) != 1)
return 0;
if (dev_t->ce_xdelay)
gpmc_t->bool_timings.cs_extra_delay = true;
if (dev_t->avd_xdelay)
gpmc_t->bool_timings.adv_extra_delay = true;
if (dev_t->oe_xdelay)
gpmc_t->bool_timings.oe_extra_delay = true;
if (dev_t->we_xdelay)
gpmc_t->bool_timings.we_extra_delay = true;
return 0;
}
static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t,
struct gpmc_device_timings *dev_t,
bool sync)
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
{
u32 temp;
/* cs_on */
gpmc_t->cs_on = gpmc_round_ps_to_ticks(dev_t->t_ceasu);
/* adv_on */
temp = dev_t->t_avdasu;
if (dev_t->t_ce_avd)
temp = max_t(u32, temp,
gpmc_t->cs_on + dev_t->t_ce_avd);
gpmc_t->adv_on = gpmc_round_ps_to_ticks(temp);
if (sync)
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
gpmc_calc_sync_common_timings(gpmc_t, dev_t);
return 0;
}
/* TODO: remove this function once all peripherals are confirmed to
* work with generic timing. Simultaneously gpmc_cs_set_timings()
* has to be modified to handle timings in ps instead of ns
*/
static void gpmc_convert_ps_to_ns(struct gpmc_timings *t)
{
t->cs_on /= 1000;
t->cs_rd_off /= 1000;
t->cs_wr_off /= 1000;
t->adv_on /= 1000;
t->adv_rd_off /= 1000;
t->adv_wr_off /= 1000;
t->we_on /= 1000;
t->we_off /= 1000;
t->oe_on /= 1000;
t->oe_off /= 1000;
t->page_burst_access /= 1000;
t->access /= 1000;
t->rd_cycle /= 1000;
t->wr_cycle /= 1000;
t->bus_turnaround /= 1000;
t->cycle2cycle_delay /= 1000;
t->wait_monitoring /= 1000;
t->clk_activation /= 1000;
t->wr_access /= 1000;
t->wr_data_mux_bus /= 1000;
}
int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
struct gpmc_settings *gpmc_s,
struct gpmc_device_timings *dev_t)
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
{
bool mux = false, sync = false;
if (gpmc_s) {
mux = gpmc_s->mux_add_data ? true : false;
sync = (gpmc_s->sync_read || gpmc_s->sync_write);
}
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
memset(gpmc_t, 0, sizeof(*gpmc_t));
gpmc_calc_common_timings(gpmc_t, dev_t, sync);
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
if (gpmc_s && gpmc_s->sync_read)
gpmc_calc_sync_read_timings(gpmc_t, dev_t, mux);
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
else
gpmc_calc_async_read_timings(gpmc_t, dev_t, mux);
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
if (gpmc_s && gpmc_s->sync_write)
gpmc_calc_sync_write_timings(gpmc_t, dev_t, mux);
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
else
gpmc_calc_async_write_timings(gpmc_t, dev_t, mux);
ARM: OMAP2+: gpmc: generic timing calculation Presently there are three peripherals that gets it timing by runtime calculation. Those peripherals can work with frequency scaling that affects gpmc clock. But timing calculation for them are in different ways. Here a generic runtime calculation method is proposed. Input to this function were selected so that they represent timing variables that are present in peripheral datasheets. Motive behind this was to achieve DT bindings for the inputs as is. Even though a few of the tusb6010 timings could not be made directly related to timings normally found on peripherals, expressions used were translated to those that could be justified. There are possibilities of improving the calculations, like calculating timing for read & write operations in a more similar way. Expressions derived here were tested for async onenand on omap3evm (as vanilla Kernel does not have omap3evm onenand support, local patch was used). Other peripherals, tusb6010, smc91x calculations were validated by simulating on omap3evm. Regarding "we_on" for onenand async, it was found that even for muxed address/data, it need not be greater than "adv_wr_off", but rather could be derived from write setup time for peripheral from start of access time, hence would more be in line with peripheral timings. With this method it was working fine. If it is required in some cases to have "we_on" same as "wr_data_mux_bus" (i.e. greater than "adv_wr_off"), another variable could be added to indicate it. But such a requirement is not expected though. It has been observed that "adv_rd_off" & "adv_wr_off" are currently calculated by adding an offset over "oe_on" and "we_on" respectively in the case of smc91x. But peripheral datasheet does not specify so and so "adv_rd(wr)_off" has been derived (to be specific, made ignorant of "oe_on" and "we_on") observing datasheet rather than adding an offset. Hence this generic routine is expected to work for smc91x (91C96 RX51 board). This was verified on smsc911x (9220 on OMAP3EVM) - a similar ethernet controller. Timings are calculated in ps to prevent rounding errors and converted to ns at final stage so that these values can be directly fed to gpmc_cs_set_timings(). gpmc_cs_set_timings() would be modified to take ps once all custom timing routines are replaced by the generic routine, at the same time generic timing routine would be modified to provide timings in ps. struct gpmc_timings field types are upgraded from u16 => u32 so that it can hold ps values. Whole of this exercise is being done to achieve driver and DT conversion. If timings could not be calculated in a peripheral agnostic way, either gpmc driver would have to be peripheral gnostic or a wrapper arrangement over gpmc driver would be required. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-08-02 14:32:10 +00:00
/* TODO: remove, see function definition */
gpmc_convert_ps_to_ns(gpmc_t);
return 0;
}
/**
* gpmc_cs_program_settings - programs non-timing related settings
* @cs: GPMC chip-select to program
* @p: pointer to GPMC settings structure
*
* Programs non-timing related settings for a GPMC chip-select, such as
* bus-width, burst configuration, etc. Function should be called once
* for each chip-select that is being used and must be called before
* calling gpmc_cs_set_timings() as timing parameters in the CONFIG1
* register will be initialised to zero by this function. Returns 0 on
* success and appropriate negative error code on failure.
*/
int gpmc_cs_program_settings(int cs, struct gpmc_settings *p)
{
u32 config1;
if ((!p->device_width) || (p->device_width > GPMC_DEVWIDTH_16BIT)) {
pr_err("%s: invalid width %d!", __func__, p->device_width);
return -EINVAL;
}
/* Address-data multiplexing not supported for NAND devices */
if (p->device_nand && p->mux_add_data) {
pr_err("%s: invalid configuration!\n", __func__);
return -EINVAL;
}
if ((p->mux_add_data > GPMC_MUX_AD) ||
((p->mux_add_data == GPMC_MUX_AAD) &&
!(gpmc_capability & GPMC_HAS_MUX_AAD))) {
pr_err("%s: invalid multiplex configuration!\n", __func__);
return -EINVAL;
}
/* Page/burst mode supports lengths of 4, 8 and 16 bytes */
if (p->burst_read || p->burst_write) {
switch (p->burst_len) {
case GPMC_BURST_4:
case GPMC_BURST_8:
case GPMC_BURST_16:
break;
default:
pr_err("%s: invalid page/burst-length (%d)\n",
__func__, p->burst_len);
return -EINVAL;
}
}
if ((p->wait_on_read || p->wait_on_write) &&
(p->wait_pin > gpmc_nr_waitpins)) {
pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin);
return -EINVAL;
}
config1 = GPMC_CONFIG1_DEVICESIZE((p->device_width - 1));
if (p->sync_read)
config1 |= GPMC_CONFIG1_READTYPE_SYNC;
if (p->sync_write)
config1 |= GPMC_CONFIG1_WRITETYPE_SYNC;
if (p->wait_on_read)
config1 |= GPMC_CONFIG1_WAIT_READ_MON;
if (p->wait_on_write)
config1 |= GPMC_CONFIG1_WAIT_WRITE_MON;
if (p->wait_on_read || p->wait_on_write)
config1 |= GPMC_CONFIG1_WAIT_PIN_SEL(p->wait_pin);
if (p->device_nand)
config1 |= GPMC_CONFIG1_DEVICETYPE(GPMC_DEVICETYPE_NAND);
if (p->mux_add_data)
config1 |= GPMC_CONFIG1_MUXTYPE(p->mux_add_data);
if (p->burst_read)
config1 |= GPMC_CONFIG1_READMULTIPLE_SUPP;
if (p->burst_write)
config1 |= GPMC_CONFIG1_WRITEMULTIPLE_SUPP;
if (p->burst_read || p->burst_write) {
config1 |= GPMC_CONFIG1_PAGE_LEN(p->burst_len >> 3);
config1 |= p->burst_wrap ? GPMC_CONFIG1_WRAPBURST_SUPP : 0;
}
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1);
return 0;
}
#ifdef CONFIG_OF
static struct of_device_id gpmc_dt_ids[] = {
{ .compatible = "ti,omap2420-gpmc" },
{ .compatible = "ti,omap2430-gpmc" },
{ .compatible = "ti,omap3430-gpmc" }, /* omap3430 & omap3630 */
{ .compatible = "ti,omap4430-gpmc" }, /* omap4430 & omap4460 & omap543x */
{ .compatible = "ti,am3352-gpmc" }, /* am335x devices */
{ }
};
MODULE_DEVICE_TABLE(of, gpmc_dt_ids);
/**
* gpmc_read_settings_dt - read gpmc settings from device-tree
* @np: pointer to device-tree node for a gpmc child device
* @p: pointer to gpmc settings structure
*
* Reads the GPMC settings for a GPMC child device from device-tree and
* stores them in the GPMC settings structure passed. The GPMC settings
* structure is initialised to zero by this function and so any
* previously stored settings will be cleared.
*/
void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
{
memset(p, 0, sizeof(struct gpmc_settings));
p->sync_read = of_property_read_bool(np, "gpmc,sync-read");
p->sync_write = of_property_read_bool(np, "gpmc,sync-write");
p->device_nand = of_property_read_bool(np, "gpmc,device-nand");
of_property_read_u32(np, "gpmc,device-width", &p->device_width);
of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data);
if (!of_property_read_u32(np, "gpmc,burst-length", &p->burst_len)) {
p->burst_wrap = of_property_read_bool(np, "gpmc,burst-wrap");
p->burst_read = of_property_read_bool(np, "gpmc,burst-read");
p->burst_write = of_property_read_bool(np, "gpmc,burst-write");
if (!p->burst_read && !p->burst_write)
pr_warn("%s: page/burst-length set but not used!\n",
__func__);
}
if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) {
p->wait_on_read = of_property_read_bool(np,
"gpmc,wait-on-read");
p->wait_on_write = of_property_read_bool(np,
"gpmc,wait-on-write");
if (!p->wait_on_read && !p->wait_on_write)
pr_warn("%s: read/write wait monitoring not enabled!\n",
__func__);
}
}
static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
struct gpmc_timings *gpmc_t)
{
struct gpmc_bool_timings *p;
if (!np || !gpmc_t)
return;
memset(gpmc_t, 0, sizeof(*gpmc_t));
/* minimum clock period for syncronous mode */
of_property_read_u32(np, "gpmc,sync-clk-ps", &gpmc_t->sync_clk);
/* chip select timtings */
of_property_read_u32(np, "gpmc,cs-on-ns", &gpmc_t->cs_on);
of_property_read_u32(np, "gpmc,cs-rd-off-ns", &gpmc_t->cs_rd_off);
of_property_read_u32(np, "gpmc,cs-wr-off-ns", &gpmc_t->cs_wr_off);
/* ADV signal timings */
of_property_read_u32(np, "gpmc,adv-on-ns", &gpmc_t->adv_on);
of_property_read_u32(np, "gpmc,adv-rd-off-ns", &gpmc_t->adv_rd_off);
of_property_read_u32(np, "gpmc,adv-wr-off-ns", &gpmc_t->adv_wr_off);
/* WE signal timings */
of_property_read_u32(np, "gpmc,we-on-ns", &gpmc_t->we_on);
of_property_read_u32(np, "gpmc,we-off-ns", &gpmc_t->we_off);
/* OE signal timings */
of_property_read_u32(np, "gpmc,oe-on-ns", &gpmc_t->oe_on);
of_property_read_u32(np, "gpmc,oe-off-ns", &gpmc_t->oe_off);
/* access and cycle timings */
of_property_read_u32(np, "gpmc,page-burst-access-ns",
&gpmc_t->page_burst_access);
of_property_read_u32(np, "gpmc,access-ns", &gpmc_t->access);
of_property_read_u32(np, "gpmc,rd-cycle-ns", &gpmc_t->rd_cycle);
of_property_read_u32(np, "gpmc,wr-cycle-ns", &gpmc_t->wr_cycle);
of_property_read_u32(np, "gpmc,bus-turnaround-ns",
&gpmc_t->bus_turnaround);
of_property_read_u32(np, "gpmc,cycle2cycle-delay-ns",
&gpmc_t->cycle2cycle_delay);
of_property_read_u32(np, "gpmc,wait-monitoring-ns",
&gpmc_t->wait_monitoring);
of_property_read_u32(np, "gpmc,clk-activation-ns",
&gpmc_t->clk_activation);
/* only applicable to OMAP3+ */
of_property_read_u32(np, "gpmc,wr-access-ns", &gpmc_t->wr_access);
of_property_read_u32(np, "gpmc,wr-data-mux-bus-ns",
&gpmc_t->wr_data_mux_bus);
/* bool timing parameters */
p = &gpmc_t->bool_timings;
p->cycle2cyclediffcsen =
of_property_read_bool(np, "gpmc,cycle2cycle-diffcsen");
p->cycle2cyclesamecsen =
of_property_read_bool(np, "gpmc,cycle2cycle-samecsen");
p->we_extra_delay = of_property_read_bool(np, "gpmc,we-extra-delay");
p->oe_extra_delay = of_property_read_bool(np, "gpmc,oe-extra-delay");
p->adv_extra_delay = of_property_read_bool(np, "gpmc,adv-extra-delay");
p->cs_extra_delay = of_property_read_bool(np, "gpmc,cs-extra-delay");
p->time_para_granularity =
of_property_read_bool(np, "gpmc,time-para-granularity");
}
#ifdef CONFIG_MTD_NAND
static const char * const nand_ecc_opts[] = {
[OMAP_ECC_HAMMING_CODE_DEFAULT] = "sw",
[OMAP_ECC_HAMMING_CODE_HW] = "hw",
[OMAP_ECC_HAMMING_CODE_HW_ROMCODE] = "hw-romcode",
[OMAP_ECC_BCH4_CODE_HW] = "bch4",
[OMAP_ECC_BCH8_CODE_HW] = "bch8",
};
static int gpmc_probe_nand_child(struct platform_device *pdev,
struct device_node *child)
{
u32 val;
const char *s;
struct gpmc_timings gpmc_t;
struct omap_nand_platform_data *gpmc_nand_data;
if (of_property_read_u32(child, "reg", &val) < 0) {
dev_err(&pdev->dev, "%s has no 'reg' property\n",
child->full_name);
return -ENODEV;
}
gpmc_nand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_nand_data),
GFP_KERNEL);
if (!gpmc_nand_data)
return -ENOMEM;
gpmc_nand_data->cs = val;
gpmc_nand_data->of_node = child;
if (!of_property_read_string(child, "ti,nand-ecc-opt", &s))
for (val = 0; val < ARRAY_SIZE(nand_ecc_opts); val++)
if (!strcasecmp(s, nand_ecc_opts[val])) {
gpmc_nand_data->ecc_opt = val;
break;
}
val = of_get_nand_bus_width(child);
if (val == 16)
gpmc_nand_data->devsize = NAND_BUSWIDTH_16;
gpmc_read_timings_dt(child, &gpmc_t);
gpmc_nand_init(gpmc_nand_data, &gpmc_t);
return 0;
}
#else
static int gpmc_probe_nand_child(struct platform_device *pdev,
struct device_node *child)
{
return 0;
}
#endif
#ifdef CONFIG_MTD_ONENAND
static int gpmc_probe_onenand_child(struct platform_device *pdev,
struct device_node *child)
{
u32 val;
struct omap_onenand_platform_data *gpmc_onenand_data;
if (of_property_read_u32(child, "reg", &val) < 0) {
dev_err(&pdev->dev, "%s has no 'reg' property\n",
child->full_name);
return -ENODEV;
}
gpmc_onenand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_onenand_data),
GFP_KERNEL);
if (!gpmc_onenand_data)
return -ENOMEM;
gpmc_onenand_data->cs = val;
gpmc_onenand_data->of_node = child;
gpmc_onenand_data->dma_channel = -1;
if (!of_property_read_u32(child, "dma-channel", &val))
gpmc_onenand_data->dma_channel = val;
gpmc_onenand_init(gpmc_onenand_data);
return 0;
}
#else
static int gpmc_probe_onenand_child(struct platform_device *pdev,
struct device_node *child)
{
return 0;
}
#endif
/**
* gpmc_probe_generic_child - configures the gpmc for a child device
* @pdev: pointer to gpmc platform device
* @child: pointer to device-tree node for child device
*
* Allocates and configures a GPMC chip-select for a child device.
* Returns 0 on success and appropriate negative error code on failure.
*/
static int gpmc_probe_generic_child(struct platform_device *pdev,
struct device_node *child)
{
struct gpmc_settings gpmc_s;
struct gpmc_timings gpmc_t;
struct resource res;
unsigned long base;
int ret, cs;
if (of_property_read_u32(child, "reg", &cs) < 0) {
dev_err(&pdev->dev, "%s has no 'reg' property\n",
child->full_name);
return -ENODEV;
}
if (of_address_to_resource(child, 0, &res) < 0) {
dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
child->full_name);
return -ENODEV;
}
ret = gpmc_cs_request(cs, resource_size(&res), &base);
if (ret < 0) {
dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
return ret;
}
/*
* FIXME: gpmc_cs_request() will map the CS to an arbitary
* location in the gpmc address space. When booting with
* device-tree we want the NOR flash to be mapped to the
* location specified in the device-tree blob. So remap the
* CS to this location. Once DT migration is complete should
* just make gpmc_cs_request() map a specific address.
*/
ret = gpmc_cs_remap(cs, res.start);
if (ret < 0) {
dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n",
cs, res.start);
goto err;
}
gpmc_read_settings_dt(child, &gpmc_s);
ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width);
if (ret < 0)
goto err;
ret = gpmc_cs_program_settings(cs, &gpmc_s);
if (ret < 0)
goto err;
gpmc_read_timings_dt(child, &gpmc_t);
gpmc_cs_set_timings(cs, &gpmc_t);
if (of_platform_device_create(child, NULL, &pdev->dev))
return 0;
dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
ret = -ENODEV;
err:
gpmc_cs_free(cs);
return ret;
}
static int gpmc_probe_dt(struct platform_device *pdev)
{
int ret;
struct device_node *child;
const struct of_device_id *of_id =
of_match_device(gpmc_dt_ids, &pdev->dev);
if (!of_id)
return 0;
ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins",
&gpmc_nr_waitpins);
if (ret < 0) {
pr_err("%s: number of wait pins not found!\n", __func__);
return ret;
}
for_each_child_of_node(pdev->dev.of_node, child) {
if (!child->name)
continue;
if (of_node_cmp(child->name, "nand") == 0)
ret = gpmc_probe_nand_child(pdev, child);
else if (of_node_cmp(child->name, "onenand") == 0)
ret = gpmc_probe_onenand_child(pdev, child);
else if (of_node_cmp(child->name, "ethernet") == 0 ||
of_node_cmp(child->name, "nor") == 0)
ret = gpmc_probe_generic_child(pdev, child);
if (ret < 0) {
of_node_put(child);
return ret;
}
}
return 0;
}
#else
static int gpmc_probe_dt(struct platform_device *pdev)
{
return 0;
}
#endif
static int gpmc_probe(struct platform_device *pdev)
{
int rc;
u32 l;
struct resource *res;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL)
return -ENOENT;
phys_base = res->start;
mem_size = resource_size(res);
gpmc_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(gpmc_base))
return PTR_ERR(gpmc_base);
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res == NULL)
dev_warn(&pdev->dev, "Failed to get resource: irq\n");
else
gpmc_irq = res->start;
gpmc_l3_clk = clk_get(&pdev->dev, "fck");
if (IS_ERR(gpmc_l3_clk)) {
dev_err(&pdev->dev, "error: clk_get\n");
gpmc_irq = 0;
return PTR_ERR(gpmc_l3_clk);
}
ARM: omap: clk: add clk_prepare and clk_unprepare As part of Common Clk Framework (CCF) the clk_enable() operation was split into a clk_prepare() which could sleep, and a clk_enable() which should never sleep. Similarly the clk_disable() was split into clk_disable() and clk_unprepare(). This was needed to handle complex cases where in a clk gate/ungate would require a slow and a fast part to be implemented. None of the clocks below seem to be in the 'complex' clocks category and are just simple clocks which are enabled/disabled through simple register writes. Most of the instances also seem to be called in non-atomic context which means its safe to move all of those from using a clk_enable() to clk_prepare_enable() and clk_disable() to clk_disable_unprepare(). For some others, mainly the ones handled through the hwmod framework there is a possibility that they get called in either an atomic or a non-atomic context. The way these get handled below work only as long as clk_prepare is implemented as a no-op (which is the case today) since this gets called very early at boot while most subsystems are unavailable. Hence these are marked with a *HACK* comment, which says we need to re-visit these once we start doing something meaningful with clk_prepare/clk_unprepare like doing voltage scaling or something that involves i2c. This is in preparation of OMAP moving to CCF. Based on initial changes from Mike Turquette. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-09-22 08:24:16 +00:00
clk_prepare_enable(gpmc_l3_clk);
gpmc_dev = &pdev->dev;
l = gpmc_read_reg(GPMC_REVISION);
/*
* FIXME: Once device-tree migration is complete the below flags
* should be populated based upon the device-tree compatible
* string. For now just use the IP revision. OMAP3+ devices have
* the wr_access and wr_data_mux_bus register fields. OMAP4+
* devices support the addr-addr-data multiplex protocol.
*
* GPMC IP revisions:
* - OMAP24xx = 2.0
* - OMAP3xxx = 5.0
* - OMAP44xx/54xx/AM335x = 6.0
*/
if (GPMC_REVISION_MAJOR(l) > 0x4)
gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS;
if (GPMC_REVISION_MAJOR(l) > 0x5)
gpmc_capability |= GPMC_HAS_MUX_AAD;
dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
GPMC_REVISION_MINOR(l));
gpmc_mem_init();
if (gpmc_setup_irq() < 0)
dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
/* Now the GPMC is initialised, unreserve the chip-selects */
gpmc_cs_map = 0;
if (!pdev->dev.of_node)
gpmc_nr_waitpins = GPMC_NR_WAITPINS;
rc = gpmc_probe_dt(pdev);
if (rc < 0) {
clk_disable_unprepare(gpmc_l3_clk);
clk_put(gpmc_l3_clk);
dev_err(gpmc_dev, "failed to probe DT parameters\n");
return rc;
}
return 0;
}
static int gpmc_remove(struct platform_device *pdev)
{
gpmc_free_irq();
gpmc_mem_exit();
gpmc_dev = NULL;
return 0;
}
static struct platform_driver gpmc_driver = {
.probe = gpmc_probe,
.remove = gpmc_remove,
.driver = {
.name = DEVICE_NAME,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(gpmc_dt_ids),
},
};
static __init int gpmc_init(void)
{
return platform_driver_register(&gpmc_driver);
}
static __exit void gpmc_exit(void)
{
platform_driver_unregister(&gpmc_driver);
}
omap_postcore_initcall(gpmc_init);
module_exit(gpmc_exit);
static int __init omap_gpmc_init(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
char *oh_name = "gpmc";
/*
* if the board boots up with a populated DT, do not
* manually add the device from this initcall
*/
if (of_have_populated_dt())
return -ENODEV;
oh = omap_hwmod_lookup(oh_name);
if (!oh) {
pr_err("Could not look up %s\n", oh_name);
return -ENODEV;
}
pdev = omap_device_build(DEVICE_NAME, -1, oh, NULL, 0);
WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
}
omap_postcore_initcall(omap_gpmc_init);
static irqreturn_t gpmc_handle_irq(int irq, void *dev)
{
int i;
u32 regval;
regval = gpmc_read_reg(GPMC_IRQSTATUS);
if (!regval)
return IRQ_NONE;
for (i = 0; i < GPMC_NR_IRQ; i++)
if (regval & gpmc_client_irq[i].bitmask)
generic_handle_irq(gpmc_client_irq[i].irq);
gpmc_write_reg(GPMC_IRQSTATUS, regval);
return IRQ_HANDLED;
}
#ifdef CONFIG_ARCH_OMAP3
static struct omap3_gpmc_regs gpmc_context;
void omap3_gpmc_save_context(void)
{
int i;
gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
gpmc_context.config = gpmc_read_reg(GPMC_CONFIG);
gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2);
gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL);
for (i = 0; i < GPMC_CS_NUM; i++) {
gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i);
if (gpmc_context.cs_context[i].is_valid) {
gpmc_context.cs_context[i].config1 =
gpmc_cs_read_reg(i, GPMC_CS_CONFIG1);
gpmc_context.cs_context[i].config2 =
gpmc_cs_read_reg(i, GPMC_CS_CONFIG2);
gpmc_context.cs_context[i].config3 =
gpmc_cs_read_reg(i, GPMC_CS_CONFIG3);
gpmc_context.cs_context[i].config4 =
gpmc_cs_read_reg(i, GPMC_CS_CONFIG4);
gpmc_context.cs_context[i].config5 =
gpmc_cs_read_reg(i, GPMC_CS_CONFIG5);
gpmc_context.cs_context[i].config6 =
gpmc_cs_read_reg(i, GPMC_CS_CONFIG6);
gpmc_context.cs_context[i].config7 =
gpmc_cs_read_reg(i, GPMC_CS_CONFIG7);
}
}
}
void omap3_gpmc_restore_context(void)
{
int i;
gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);
gpmc_write_reg(GPMC_CONFIG, gpmc_context.config);
gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1);
gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2);
gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control);
for (i = 0; i < GPMC_CS_NUM; i++) {
if (gpmc_context.cs_context[i].is_valid) {
gpmc_cs_write_reg(i, GPMC_CS_CONFIG1,
gpmc_context.cs_context[i].config1);
gpmc_cs_write_reg(i, GPMC_CS_CONFIG2,
gpmc_context.cs_context[i].config2);
gpmc_cs_write_reg(i, GPMC_CS_CONFIG3,
gpmc_context.cs_context[i].config3);
gpmc_cs_write_reg(i, GPMC_CS_CONFIG4,
gpmc_context.cs_context[i].config4);
gpmc_cs_write_reg(i, GPMC_CS_CONFIG5,
gpmc_context.cs_context[i].config5);
gpmc_cs_write_reg(i, GPMC_CS_CONFIG6,
gpmc_context.cs_context[i].config6);
gpmc_cs_write_reg(i, GPMC_CS_CONFIG7,
gpmc_context.cs_context[i].config7);
}
}
}
#endif /* CONFIG_ARCH_OMAP3 */