linux-stable/drivers/spi/spi-bcm2835aux.c

606 lines
17 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 06:55:06 +00:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Driver for Broadcom BCM2835 auxiliary SPI Controllers
*
* the driver does not rely on the native chipselects at all
* but only uses the gpio type chipselects
*
* Based on: spi-bcm2835.c
*
* Copyright (C) 2015 Martin Sperl
*/
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
#include <linux/spinlock.h>
/* define polling limits */
static unsigned int polling_limit_us = 30;
module_param(polling_limit_us, uint, 0664);
MODULE_PARM_DESC(polling_limit_us,
"time in us to run a transfer in polling mode - if zero no polling is used\n");
/*
* spi register defines
*
* note there is garbage in the "official" documentation,
* so some data is taken from the file:
* brcm_usrlib/dag/vmcsx/vcinclude/bcm2708_chip/aux_io.h
* inside of:
* http://www.broadcom.com/docs/support/videocore/Brcm_Android_ICS_Graphics_Stack.tar.gz
*/
/* SPI register offsets */
#define BCM2835_AUX_SPI_CNTL0 0x00
#define BCM2835_AUX_SPI_CNTL1 0x04
#define BCM2835_AUX_SPI_STAT 0x08
#define BCM2835_AUX_SPI_PEEK 0x0C
#define BCM2835_AUX_SPI_IO 0x20
#define BCM2835_AUX_SPI_TXHOLD 0x30
/* Bitfields in CNTL0 */
#define BCM2835_AUX_SPI_CNTL0_SPEED 0xFFF00000
#define BCM2835_AUX_SPI_CNTL0_SPEED_MAX 0xFFF
#define BCM2835_AUX_SPI_CNTL0_SPEED_SHIFT 20
#define BCM2835_AUX_SPI_CNTL0_CS 0x000E0000
#define BCM2835_AUX_SPI_CNTL0_POSTINPUT 0x00010000
#define BCM2835_AUX_SPI_CNTL0_VAR_CS 0x00008000
#define BCM2835_AUX_SPI_CNTL0_VAR_WIDTH 0x00004000
#define BCM2835_AUX_SPI_CNTL0_DOUTHOLD 0x00003000
#define BCM2835_AUX_SPI_CNTL0_ENABLE 0x00000800
#define BCM2835_AUX_SPI_CNTL0_IN_RISING 0x00000400
#define BCM2835_AUX_SPI_CNTL0_CLEARFIFO 0x00000200
#define BCM2835_AUX_SPI_CNTL0_OUT_RISING 0x00000100
#define BCM2835_AUX_SPI_CNTL0_CPOL 0x00000080
#define BCM2835_AUX_SPI_CNTL0_MSBF_OUT 0x00000040
#define BCM2835_AUX_SPI_CNTL0_SHIFTLEN 0x0000003F
/* Bitfields in CNTL1 */
#define BCM2835_AUX_SPI_CNTL1_CSHIGH 0x00000700
#define BCM2835_AUX_SPI_CNTL1_TXEMPTY 0x00000080
#define BCM2835_AUX_SPI_CNTL1_IDLE 0x00000040
#define BCM2835_AUX_SPI_CNTL1_MSBF_IN 0x00000002
#define BCM2835_AUX_SPI_CNTL1_KEEP_IN 0x00000001
/* Bitfields in STAT */
#define BCM2835_AUX_SPI_STAT_TX_LVL 0xFF000000
#define BCM2835_AUX_SPI_STAT_RX_LVL 0x00FF0000
#define BCM2835_AUX_SPI_STAT_TX_FULL 0x00000400
#define BCM2835_AUX_SPI_STAT_TX_EMPTY 0x00000200
#define BCM2835_AUX_SPI_STAT_RX_FULL 0x00000100
#define BCM2835_AUX_SPI_STAT_RX_EMPTY 0x00000080
#define BCM2835_AUX_SPI_STAT_BUSY 0x00000040
#define BCM2835_AUX_SPI_STAT_BITCOUNT 0x0000003F
struct bcm2835aux_spi {
void __iomem *regs;
struct clk *clk;
int irq;
u32 cntl[2];
const u8 *tx_buf;
u8 *rx_buf;
int tx_len;
int rx_len;
int pending;
u64 count_transfer_polling;
u64 count_transfer_irq;
u64 count_transfer_irq_after_poll;
struct dentry *debugfs_dir;
};
#if defined(CONFIG_DEBUG_FS)
static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs,
const char *dname)
{
char name[64];
struct dentry *dir;
/* get full name */
snprintf(name, sizeof(name), "spi-bcm2835aux-%s", dname);
/* the base directory */
dir = debugfs_create_dir(name, NULL);
bs->debugfs_dir = dir;
/* the counters */
debugfs_create_u64("count_transfer_polling", 0444, dir,
&bs->count_transfer_polling);
debugfs_create_u64("count_transfer_irq", 0444, dir,
&bs->count_transfer_irq);
debugfs_create_u64("count_transfer_irq_after_poll", 0444, dir,
&bs->count_transfer_irq_after_poll);
}
static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs)
{
debugfs_remove_recursive(bs->debugfs_dir);
bs->debugfs_dir = NULL;
}
#else
static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs,
const char *dname)
{
}
static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs)
{
}
#endif /* CONFIG_DEBUG_FS */
static inline u32 bcm2835aux_rd(struct bcm2835aux_spi *bs, unsigned int reg)
{
return readl(bs->regs + reg);
}
static inline void bcm2835aux_wr(struct bcm2835aux_spi *bs, unsigned int reg,
u32 val)
{
writel(val, bs->regs + reg);
}
static inline void bcm2835aux_rd_fifo(struct bcm2835aux_spi *bs)
{
u32 data;
int count = min(bs->rx_len, 3);
data = bcm2835aux_rd(bs, BCM2835_AUX_SPI_IO);
if (bs->rx_buf) {
switch (count) {
case 3:
*bs->rx_buf++ = (data >> 16) & 0xff;
fallthrough;
case 2:
*bs->rx_buf++ = (data >> 8) & 0xff;
fallthrough;
case 1:
*bs->rx_buf++ = (data >> 0) & 0xff;
/* fallthrough - no default */
}
}
bs->rx_len -= count;
bs->pending -= count;
}
static inline void bcm2835aux_wr_fifo(struct bcm2835aux_spi *bs)
{
u32 data;
u8 byte;
int count;
int i;
/* gather up to 3 bytes to write to the FIFO */
count = min(bs->tx_len, 3);
data = 0;
for (i = 0; i < count; i++) {
byte = bs->tx_buf ? *bs->tx_buf++ : 0;
data |= byte << (8 * (2 - i));
}
/* and set the variable bit-length */
data |= (count * 8) << 24;
/* and decrement length */
bs->tx_len -= count;
bs->pending += count;
/* write to the correct TX-register */
if (bs->tx_len)
bcm2835aux_wr(bs, BCM2835_AUX_SPI_TXHOLD, data);
else
bcm2835aux_wr(bs, BCM2835_AUX_SPI_IO, data);
}
static void bcm2835aux_spi_reset_hw(struct bcm2835aux_spi *bs)
{
/* disable spi clearing fifo and interrupts */
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, 0);
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0,
BCM2835_AUX_SPI_CNTL0_CLEARFIFO);
}
static void bcm2835aux_spi_transfer_helper(struct bcm2835aux_spi *bs)
{
u32 stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT);
/* check if we have data to read */
for (; bs->rx_len && (stat & BCM2835_AUX_SPI_STAT_RX_LVL);
stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT))
bcm2835aux_rd_fifo(bs);
/* check if we have data to write */
while (bs->tx_len &&
(bs->pending < 12) &&
(!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
BCM2835_AUX_SPI_STAT_TX_FULL))) {
bcm2835aux_wr_fifo(bs);
}
}
static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
{
struct spi_master *master = dev_id;
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
/* IRQ may be shared, so return if our interrupts are disabled */
if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) &
(BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE)))
return IRQ_NONE;
/* do common fifo handling */
bcm2835aux_spi_transfer_helper(bs);
if (!bs->tx_len) {
/* disable tx fifo empty interrupt */
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1] |
BCM2835_AUX_SPI_CNTL1_IDLE);
}
/* and if rx_len is 0 then disable interrupts and wake up completion */
if (!bs->rx_len) {
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
spi_finalize_current_transfer(master);
}
return IRQ_HANDLED;
}
static int __bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *tfr)
{
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
/* enable interrupts */
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1] |
BCM2835_AUX_SPI_CNTL1_TXEMPTY |
BCM2835_AUX_SPI_CNTL1_IDLE);
/* and wait for finish... */
return 1;
}
static int bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *tfr)
{
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
/* update statistics */
bs->count_transfer_irq++;
/* fill in registers and fifos before enabling interrupts */
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
/* fill in tx fifo with data before enabling interrupts */
while ((bs->tx_len) &&
(bs->pending < 12) &&
(!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
BCM2835_AUX_SPI_STAT_TX_FULL))) {
bcm2835aux_wr_fifo(bs);
}
/* now run the interrupt mode */
return __bcm2835aux_spi_transfer_one_irq(master, spi, tfr);
}
static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *tfr)
{
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
unsigned long timeout;
/* update statistics */
bs->count_transfer_polling++;
/* configure spi */
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
/* set the timeout to at least 2 jiffies */
timeout = jiffies + 2 + HZ * polling_limit_us / 1000000;
/* loop until finished the transfer */
while (bs->rx_len) {
/* do common fifo handling */
bcm2835aux_spi_transfer_helper(bs);
/* there is still data pending to read check the timeout */
if (bs->rx_len && time_after(jiffies, timeout)) {
dev_dbg_ratelimited(&spi->dev,
"timeout period reached: jiffies: %lu remaining tx/rx: %d/%d - falling back to interrupt mode\n",
jiffies - timeout,
bs->tx_len, bs->rx_len);
/* forward to interrupt handler */
bs->count_transfer_irq_after_poll++;
return __bcm2835aux_spi_transfer_one_irq(master,
spi, tfr);
}
}
/* and return without waiting for completion */
return 0;
}
static int bcm2835aux_spi_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *tfr)
{
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
unsigned long spi_hz, clk_hz, speed;
unsigned long hz_per_byte, byte_limit;
/* calculate the registers to handle
*
* note that we use the variable data mode, which
* is not optimal for longer transfers as we waste registers
* resulting (potentially) in more interrupts when transferring
* more than 12 bytes
*/
/* set clock */
spi_hz = tfr->speed_hz;
clk_hz = clk_get_rate(bs->clk);
if (spi_hz >= clk_hz / 2) {
speed = 0;
} else if (spi_hz) {
speed = DIV_ROUND_UP(clk_hz, 2 * spi_hz) - 1;
if (speed > BCM2835_AUX_SPI_CNTL0_SPEED_MAX)
speed = BCM2835_AUX_SPI_CNTL0_SPEED_MAX;
} else { /* the slowest we can go */
speed = BCM2835_AUX_SPI_CNTL0_SPEED_MAX;
}
/* mask out old speed from previous spi_transfer */
bs->cntl[0] &= ~(BCM2835_AUX_SPI_CNTL0_SPEED);
/* set the new speed */
bs->cntl[0] |= speed << BCM2835_AUX_SPI_CNTL0_SPEED_SHIFT;
tfr->effective_speed_hz = clk_hz / (2 * (speed + 1));
/* set transmit buffers and length */
bs->tx_buf = tfr->tx_buf;
bs->rx_buf = tfr->rx_buf;
bs->tx_len = tfr->len;
bs->rx_len = tfr->len;
bs->pending = 0;
/* Calculate the estimated time in us the transfer runs. Note that
* there are 2 idle clocks cycles after each chunk getting
* transferred - in our case the chunk size is 3 bytes, so we
* approximate this by 9 cycles/byte. This is used to find the number
* of Hz per byte per polling limit. E.g., we can transfer 1 byte in
* 30 µs per 300,000 Hz of bus clock.
*/
hz_per_byte = polling_limit_us ? (9 * 1000000) / polling_limit_us : 0;
byte_limit = hz_per_byte ? tfr->effective_speed_hz / hz_per_byte : 1;
/* run in polling mode for short transfers */
if (tfr->len < byte_limit)
return bcm2835aux_spi_transfer_one_poll(master, spi, tfr);
/* run in interrupt mode for all others */
return bcm2835aux_spi_transfer_one_irq(master, spi, tfr);
}
static int bcm2835aux_spi_prepare_message(struct spi_master *master,
struct spi_message *msg)
{
struct spi_device *spi = msg->spi;
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
bs->cntl[0] = BCM2835_AUX_SPI_CNTL0_ENABLE |
BCM2835_AUX_SPI_CNTL0_VAR_WIDTH |
BCM2835_AUX_SPI_CNTL0_MSBF_OUT;
bs->cntl[1] = BCM2835_AUX_SPI_CNTL1_MSBF_IN;
/* handle all the modes */
if (spi->mode & SPI_CPOL) {
bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_CPOL;
bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_OUT_RISING;
} else {
bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_IN_RISING;
}
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
return 0;
}
static int bcm2835aux_spi_unprepare_message(struct spi_master *master,
struct spi_message *msg)
{
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
bcm2835aux_spi_reset_hw(bs);
return 0;
}
static void bcm2835aux_spi_handle_err(struct spi_master *master,
struct spi_message *msg)
{
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
bcm2835aux_spi_reset_hw(bs);
}
static int bcm2835aux_spi_setup(struct spi_device *spi)
{
/* sanity check for native cs */
if (spi->mode & SPI_NO_CS)
return 0;
if (spi->cs_gpiod)
return 0;
/* for dt-backwards compatibility: only support native on CS0
* known things not supported with broken native CS:
* * multiple chip-selects: cs0-cs2 are all
* simultaniously asserted whenever there is a transfer
* this even includes SPI_NO_CS
* * SPI_CS_HIGH: cs are always asserted low
* * cs_change: cs is deasserted after each spi_transfer
* * cs_delay_usec: cs is always deasserted one SCK cycle
* after the last transfer
* probably more...
*/
dev_warn(&spi->dev,
"Native CS is not supported - please configure cs-gpio in device-tree\n");
if (spi->chip_select == 0)
return 0;
dev_warn(&spi->dev, "Native CS is not working for cs > 0\n");
return -EINVAL;
}
static int bcm2835aux_spi_probe(struct platform_device *pdev)
{
struct spi_master *master;
struct bcm2835aux_spi *bs;
unsigned long clk_hz;
int err;
master = devm_spi_alloc_master(&pdev->dev, sizeof(*bs));
if (!master)
return -ENOMEM;
platform_set_drvdata(pdev, master);
master->mode_bits = (SPI_CPOL | SPI_CS_HIGH | SPI_NO_CS);
master->bits_per_word_mask = SPI_BPW_MASK(8);
/* even though the driver never officially supported native CS
* allow a single native CS for legacy DT support purposes when
* no cs-gpio is configured.
* Known limitations for native cs are:
* * multiple chip-selects: cs0-cs2 are all simultaniously asserted
* whenever there is a transfer - this even includes SPI_NO_CS
* * SPI_CS_HIGH: is ignores - cs are always asserted low
* * cs_change: cs is deasserted after each spi_transfer
* * cs_delay_usec: cs is always deasserted one SCK cycle after
* a spi_transfer
*/
master->num_chipselect = 1;
master->setup = bcm2835aux_spi_setup;
master->transfer_one = bcm2835aux_spi_transfer_one;
master->handle_err = bcm2835aux_spi_handle_err;
master->prepare_message = bcm2835aux_spi_prepare_message;
master->unprepare_message = bcm2835aux_spi_unprepare_message;
master->dev.of_node = pdev->dev.of_node;
master->use_gpio_descriptors = true;
bs = spi_master_get_devdata(master);
/* the main area */
bs->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(bs->regs))
return PTR_ERR(bs->regs);
bs->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(bs->clk)) {
err = PTR_ERR(bs->clk);
dev_err(&pdev->dev, "could not get clk: %d\n", err);
return err;
}
bs->irq = platform_get_irq(pdev, 0);
if (bs->irq <= 0)
return bs->irq ? bs->irq : -ENODEV;
/* this also enables the HW block */
err = clk_prepare_enable(bs->clk);
if (err) {
dev_err(&pdev->dev, "could not prepare clock: %d\n", err);
return err;
}
/* just checking if the clock returns a sane value */
clk_hz = clk_get_rate(bs->clk);
if (!clk_hz) {
dev_err(&pdev->dev, "clock returns 0 Hz\n");
err = -ENODEV;
goto out_clk_disable;
}
/* reset SPI-HW block */
bcm2835aux_spi_reset_hw(bs);
err = devm_request_irq(&pdev->dev, bs->irq,
bcm2835aux_spi_interrupt,
IRQF_SHARED,
dev_name(&pdev->dev), master);
if (err) {
dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
goto out_clk_disable;
}
err = spi_register_master(master);
if (err) {
dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
goto out_clk_disable;
}
bcm2835aux_debugfs_create(bs, dev_name(&pdev->dev));
return 0;
out_clk_disable:
clk_disable_unprepare(bs->clk);
return err;
}
static int bcm2835aux_spi_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
bcm2835aux_debugfs_remove(bs);
spi_unregister_master(master);
bcm2835aux_spi_reset_hw(bs);
/* disable the HW block by releasing the clock */
clk_disable_unprepare(bs->clk);
return 0;
}
static const struct of_device_id bcm2835aux_spi_match[] = {
{ .compatible = "brcm,bcm2835-aux-spi", },
{}
};
MODULE_DEVICE_TABLE(of, bcm2835aux_spi_match);
static struct platform_driver bcm2835aux_spi_driver = {
.driver = {
.name = "spi-bcm2835aux",
.of_match_table = bcm2835aux_spi_match,
},
.probe = bcm2835aux_spi_probe,
.remove = bcm2835aux_spi_remove,
};
module_platform_driver(bcm2835aux_spi_driver);
MODULE_DESCRIPTION("SPI controller driver for Broadcom BCM2835 aux");
MODULE_AUTHOR("Martin Sperl <kernel@martin.sperl.org>");
MODULE_LICENSE("GPL");