linux-stable/drivers/gpu/drm/drm_crtc.c

1295 lines
34 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006-2008 Intel Corporation
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
* Copyright (c) 2008 Red Hat Inc.
*
* DRM core CRTC related functions
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*
* Authors:
* Keith Packard
* Eric Anholt <eric@anholt.net>
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include <linux/ctype.h>
#include <linux/list.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/export.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_modeset_lock.h>
#include <drm/drm_atomic.h>
#include <drm/drm_auth.h>
drm: Add API for capturing frame CRCs Adds files and directories to debugfs for controlling and reading frame CRCs, per CRTC: dri/0/crtc-0/crc dri/0/crtc-0/crc/control dri/0/crtc-0/crc/data Drivers can implement the set_crc_source callback() in drm_crtc_funcs to start and stop generating frame CRCs and can add entries to the output by calling drm_crtc_add_crc_entry. v2: - Lots of good fixes suggested by Thierry. - Added documentation. - Changed the debugfs layout. - Moved to allocate the entries circular queue once when frame generation gets enabled for the first time. v3: - Use the control file just to select the source, and start and stop capture when the data file is opened and closed, respectively. - Make variable the number of CRC values per entry, per source. - Allocate entries queue each time we start capturing as now there isn't a fixed number of CRC values per entry. - Store the frame counter in the data file as a 8-digit hex number. - For sources that cannot provide useful frame numbers, place XXXXXXXX in the frame field. v4: - Build only if CONFIG_DEBUG_FS is enabled. - Use memdup_user_nul. - Consolidate calculation of the size of an entry in a helper. - Add 0x prefix to hex numbers in the data file. - Remove unnecessary snprintf and strlen usage in read callback. v5: - Made the crcs array in drm_crtc_crc_entry fixed-size - Lots of other smaller improvements suggested by Emil Velikov v7: - Move definition of drm_debugfs_crtc_crc_add to drm_internal.h v8: - Call debugfs_remove_recursive when we fail to create the minor device v9: - Register the debugfs directory for a crtc from drm_crtc_register_all() v10: - Don't let debugfs failures interrupt CRTC registration (Emil Velikov) v11: - Remove extra brace that broke compilation. Sorry! Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475767268-14379-3-git-send-email-tomeu.vizoso@collabora.com
2016-10-06 15:21:06 +00:00
#include <drm/drm_debugfs_crc.h>
#include "drm_crtc_internal.h"
#include "drm_internal.h"
/*
* Global properties
*/
static const struct drm_prop_enum_list drm_plane_type_enum_list[] = {
{ DRM_PLANE_TYPE_OVERLAY, "Overlay" },
{ DRM_PLANE_TYPE_PRIMARY, "Primary" },
{ DRM_PLANE_TYPE_CURSOR, "Cursor" },
};
/*
* Optional properties
*/
/**
* drm_crtc_force_disable - Forcibly turn off a CRTC
* @crtc: CRTC to turn off
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_crtc_force_disable(struct drm_crtc *crtc)
{
struct drm_mode_set set = {
.crtc = crtc,
};
return drm_mode_set_config_internal(&set);
}
EXPORT_SYMBOL(drm_crtc_force_disable);
/**
* drm_crtc_force_disable_all - Forcibly turn off all enabled CRTCs
* @dev: DRM device whose CRTCs to turn off
*
* Drivers may want to call this on unload to ensure that all displays are
* unlit and the GPU is in a consistent, low power state. Takes modeset locks.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_crtc_force_disable_all(struct drm_device *dev)
{
struct drm_crtc *crtc;
int ret = 0;
drm_modeset_lock_all(dev);
drm_for_each_crtc(crtc, dev)
if (crtc->enabled) {
ret = drm_crtc_force_disable(crtc);
if (ret)
goto out;
}
out:
drm_modeset_unlock_all(dev);
return ret;
}
EXPORT_SYMBOL(drm_crtc_force_disable_all);
DEFINE_WW_CLASS(crtc_ww_class);
static unsigned int drm_num_crtcs(struct drm_device *dev)
{
unsigned int num = 0;
struct drm_crtc *tmp;
drm_for_each_crtc(tmp, dev) {
num++;
}
return num;
}
static int drm_crtc_register_all(struct drm_device *dev)
{
struct drm_crtc *crtc;
int ret = 0;
drm_for_each_crtc(crtc, dev) {
drm: Add API for capturing frame CRCs Adds files and directories to debugfs for controlling and reading frame CRCs, per CRTC: dri/0/crtc-0/crc dri/0/crtc-0/crc/control dri/0/crtc-0/crc/data Drivers can implement the set_crc_source callback() in drm_crtc_funcs to start and stop generating frame CRCs and can add entries to the output by calling drm_crtc_add_crc_entry. v2: - Lots of good fixes suggested by Thierry. - Added documentation. - Changed the debugfs layout. - Moved to allocate the entries circular queue once when frame generation gets enabled for the first time. v3: - Use the control file just to select the source, and start and stop capture when the data file is opened and closed, respectively. - Make variable the number of CRC values per entry, per source. - Allocate entries queue each time we start capturing as now there isn't a fixed number of CRC values per entry. - Store the frame counter in the data file as a 8-digit hex number. - For sources that cannot provide useful frame numbers, place XXXXXXXX in the frame field. v4: - Build only if CONFIG_DEBUG_FS is enabled. - Use memdup_user_nul. - Consolidate calculation of the size of an entry in a helper. - Add 0x prefix to hex numbers in the data file. - Remove unnecessary snprintf and strlen usage in read callback. v5: - Made the crcs array in drm_crtc_crc_entry fixed-size - Lots of other smaller improvements suggested by Emil Velikov v7: - Move definition of drm_debugfs_crtc_crc_add to drm_internal.h v8: - Call debugfs_remove_recursive when we fail to create the minor device v9: - Register the debugfs directory for a crtc from drm_crtc_register_all() v10: - Don't let debugfs failures interrupt CRTC registration (Emil Velikov) v11: - Remove extra brace that broke compilation. Sorry! Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475767268-14379-3-git-send-email-tomeu.vizoso@collabora.com
2016-10-06 15:21:06 +00:00
if (drm_debugfs_crtc_add(crtc))
DRM_ERROR("Failed to initialize debugfs entry for CRTC '%s'.\n",
crtc->name);
if (crtc->funcs->late_register)
ret = crtc->funcs->late_register(crtc);
if (ret)
return ret;
}
return 0;
}
static void drm_crtc_unregister_all(struct drm_device *dev)
{
struct drm_crtc *crtc;
drm_for_each_crtc(crtc, dev) {
if (crtc->funcs->early_unregister)
crtc->funcs->early_unregister(crtc);
drm: Add API for capturing frame CRCs Adds files and directories to debugfs for controlling and reading frame CRCs, per CRTC: dri/0/crtc-0/crc dri/0/crtc-0/crc/control dri/0/crtc-0/crc/data Drivers can implement the set_crc_source callback() in drm_crtc_funcs to start and stop generating frame CRCs and can add entries to the output by calling drm_crtc_add_crc_entry. v2: - Lots of good fixes suggested by Thierry. - Added documentation. - Changed the debugfs layout. - Moved to allocate the entries circular queue once when frame generation gets enabled for the first time. v3: - Use the control file just to select the source, and start and stop capture when the data file is opened and closed, respectively. - Make variable the number of CRC values per entry, per source. - Allocate entries queue each time we start capturing as now there isn't a fixed number of CRC values per entry. - Store the frame counter in the data file as a 8-digit hex number. - For sources that cannot provide useful frame numbers, place XXXXXXXX in the frame field. v4: - Build only if CONFIG_DEBUG_FS is enabled. - Use memdup_user_nul. - Consolidate calculation of the size of an entry in a helper. - Add 0x prefix to hex numbers in the data file. - Remove unnecessary snprintf and strlen usage in read callback. v5: - Made the crcs array in drm_crtc_crc_entry fixed-size - Lots of other smaller improvements suggested by Emil Velikov v7: - Move definition of drm_debugfs_crtc_crc_add to drm_internal.h v8: - Call debugfs_remove_recursive when we fail to create the minor device v9: - Register the debugfs directory for a crtc from drm_crtc_register_all() v10: - Don't let debugfs failures interrupt CRTC registration (Emil Velikov) v11: - Remove extra brace that broke compilation. Sorry! Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475767268-14379-3-git-send-email-tomeu.vizoso@collabora.com
2016-10-06 15:21:06 +00:00
drm_debugfs_crtc_remove(crtc);
}
}
drm: Add API for capturing frame CRCs Adds files and directories to debugfs for controlling and reading frame CRCs, per CRTC: dri/0/crtc-0/crc dri/0/crtc-0/crc/control dri/0/crtc-0/crc/data Drivers can implement the set_crc_source callback() in drm_crtc_funcs to start and stop generating frame CRCs and can add entries to the output by calling drm_crtc_add_crc_entry. v2: - Lots of good fixes suggested by Thierry. - Added documentation. - Changed the debugfs layout. - Moved to allocate the entries circular queue once when frame generation gets enabled for the first time. v3: - Use the control file just to select the source, and start and stop capture when the data file is opened and closed, respectively. - Make variable the number of CRC values per entry, per source. - Allocate entries queue each time we start capturing as now there isn't a fixed number of CRC values per entry. - Store the frame counter in the data file as a 8-digit hex number. - For sources that cannot provide useful frame numbers, place XXXXXXXX in the frame field. v4: - Build only if CONFIG_DEBUG_FS is enabled. - Use memdup_user_nul. - Consolidate calculation of the size of an entry in a helper. - Add 0x prefix to hex numbers in the data file. - Remove unnecessary snprintf and strlen usage in read callback. v5: - Made the crcs array in drm_crtc_crc_entry fixed-size - Lots of other smaller improvements suggested by Emil Velikov v7: - Move definition of drm_debugfs_crtc_crc_add to drm_internal.h v8: - Call debugfs_remove_recursive when we fail to create the minor device v9: - Register the debugfs directory for a crtc from drm_crtc_register_all() v10: - Don't let debugfs failures interrupt CRTC registration (Emil Velikov) v11: - Remove extra brace that broke compilation. Sorry! Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475767268-14379-3-git-send-email-tomeu.vizoso@collabora.com
2016-10-06 15:21:06 +00:00
static int drm_crtc_crc_init(struct drm_crtc *crtc)
{
#ifdef CONFIG_DEBUG_FS
spin_lock_init(&crtc->crc.lock);
init_waitqueue_head(&crtc->crc.wq);
crtc->crc.source = kstrdup("auto", GFP_KERNEL);
if (!crtc->crc.source)
return -ENOMEM;
#endif
return 0;
}
static void drm_crtc_crc_fini(struct drm_crtc *crtc)
{
#ifdef CONFIG_DEBUG_FS
kfree(crtc->crc.source);
#endif
}
/**
* drm_crtc_init_with_planes - Initialise a new CRTC object with
* specified primary and cursor planes.
* @dev: DRM device
* @crtc: CRTC object to init
* @primary: Primary plane for CRTC
* @cursor: Cursor plane for CRTC
* @funcs: callbacks for the new CRTC
2015-12-09 14:19:31 +00:00
* @name: printf style format string for the CRTC name, or NULL for default name
*
* Inits a new object created as base part of a driver crtc object. Drivers
* should use this function instead of drm_crtc_init(), which is only provided
* for backwards compatibility with drivers which do not yet support universal
* planes). For really simple hardware which has only 1 plane look at
* drm_simple_display_pipe_init() instead.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc,
struct drm_plane *primary,
struct drm_plane *cursor,
2015-12-09 14:19:31 +00:00
const struct drm_crtc_funcs *funcs,
const char *name, ...)
{
struct drm_mode_config *config = &dev->mode_config;
int ret;
WARN_ON(primary && primary->type != DRM_PLANE_TYPE_PRIMARY);
WARN_ON(cursor && cursor->type != DRM_PLANE_TYPE_CURSOR);
crtc->dev = dev;
crtc->funcs = funcs;
INIT_LIST_HEAD(&crtc->commit_list);
spin_lock_init(&crtc->commit_lock);
drm_modeset_lock_init(&crtc->mutex);
ret = drm_mode_object_get(dev, &crtc->base, DRM_MODE_OBJECT_CRTC);
if (ret)
return ret;
if (name) {
va_list ap;
va_start(ap, name);
crtc->name = kvasprintf(GFP_KERNEL, name, ap);
va_end(ap);
} else {
crtc->name = kasprintf(GFP_KERNEL, "crtc-%d",
drm_num_crtcs(dev));
}
if (!crtc->name) {
drm_mode_object_unregister(dev, &crtc->base);
return -ENOMEM;
}
crtc->base.properties = &crtc->properties;
list_add_tail(&crtc->head, &config->crtc_list);
crtc->index = config->num_crtc++;
crtc->primary = primary;
crtc->cursor = cursor;
if (primary && !primary->possible_crtcs)
primary->possible_crtcs = 1 << drm_crtc_index(crtc);
if (cursor && !cursor->possible_crtcs)
cursor->possible_crtcs = 1 << drm_crtc_index(crtc);
drm: Add API for capturing frame CRCs Adds files and directories to debugfs for controlling and reading frame CRCs, per CRTC: dri/0/crtc-0/crc dri/0/crtc-0/crc/control dri/0/crtc-0/crc/data Drivers can implement the set_crc_source callback() in drm_crtc_funcs to start and stop generating frame CRCs and can add entries to the output by calling drm_crtc_add_crc_entry. v2: - Lots of good fixes suggested by Thierry. - Added documentation. - Changed the debugfs layout. - Moved to allocate the entries circular queue once when frame generation gets enabled for the first time. v3: - Use the control file just to select the source, and start and stop capture when the data file is opened and closed, respectively. - Make variable the number of CRC values per entry, per source. - Allocate entries queue each time we start capturing as now there isn't a fixed number of CRC values per entry. - Store the frame counter in the data file as a 8-digit hex number. - For sources that cannot provide useful frame numbers, place XXXXXXXX in the frame field. v4: - Build only if CONFIG_DEBUG_FS is enabled. - Use memdup_user_nul. - Consolidate calculation of the size of an entry in a helper. - Add 0x prefix to hex numbers in the data file. - Remove unnecessary snprintf and strlen usage in read callback. v5: - Made the crcs array in drm_crtc_crc_entry fixed-size - Lots of other smaller improvements suggested by Emil Velikov v7: - Move definition of drm_debugfs_crtc_crc_add to drm_internal.h v8: - Call debugfs_remove_recursive when we fail to create the minor device v9: - Register the debugfs directory for a crtc from drm_crtc_register_all() v10: - Don't let debugfs failures interrupt CRTC registration (Emil Velikov) v11: - Remove extra brace that broke compilation. Sorry! Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475767268-14379-3-git-send-email-tomeu.vizoso@collabora.com
2016-10-06 15:21:06 +00:00
ret = drm_crtc_crc_init(crtc);
if (ret) {
drm_mode_object_unregister(dev, &crtc->base);
return ret;
}
drm/atomic: Add drm_crtc_state->active This is the infrastructure for DPMS ported to the atomic world. Fundamental changes compare to legacy DPMS are: - No more per-connector dpms state, instead there's just one per each display pipeline. So if you clone either you have to unclone first if you only want to switch off one screen, or you just switch of everything (like all desktops do). This massively reduces complexity for cloning since now there's no more half-enabled cloned configs to consider. - Only on/off, dpms standby/suspend are as dead as real CRTs. Again reduces complexity a lot. Now especially for backwards compat the really important part for dpms support is that dpms on always succeeds (except for hw death and unplugged cables ofc). Which means everything that could fail (like configuration checking, resources assignments and buffer management) must be done irrespective from ->active. ->active is really only a toggle to change the hardware state. More precisely: - Drivers MUST NOT look at ->active in their ->atomic_check callbacks. Changes to ->active MUST always suceed if nothing else changes. - Drivers using the atomic helpers MUST NOT look at ->active anywhere, period. The helpers will take care of calling the respective enable/modeset/disable hooks as necessary. As before the helpers will carefully keep track of the state and not call any hooks unecessarily, so still no double-disables or enables like with crtc helpers. - ->mode_set hooks are only called when the mode or output configuration changes, not for changes in ->active state. - Drivers which reconstruct the state objects in their ->reset hooks or through some other hw state readout infrastructure must ensure that ->active reflects actual hw state. This just implements the core bits and helper logic, a subsequent patch will implement the helper code to implement legacy dpms with this. v2: Rebase on top of the drm ioctl work: - Move crtc checks to the core check function. - Also check for ->active_changed when deciding whether a modeset might happen (for the ALLOW_MODESET mode). - Expose the ->active state with an atomic prop. v3: Review from Rob - Spelling fix in comment. - Extract needs_modeset helper to consolidate the ->mode_changed || ->active_changed checks. v4: Fixup fumble between crtc->state and crtc_state. Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-01-22 15:36:21 +00:00
if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
drm_object_attach_property(&crtc->base, config->prop_active, 0);
drm_object_attach_property(&crtc->base, config->prop_mode_id, 0);
drm/atomic: Add drm_crtc_state->active This is the infrastructure for DPMS ported to the atomic world. Fundamental changes compare to legacy DPMS are: - No more per-connector dpms state, instead there's just one per each display pipeline. So if you clone either you have to unclone first if you only want to switch off one screen, or you just switch of everything (like all desktops do). This massively reduces complexity for cloning since now there's no more half-enabled cloned configs to consider. - Only on/off, dpms standby/suspend are as dead as real CRTs. Again reduces complexity a lot. Now especially for backwards compat the really important part for dpms support is that dpms on always succeeds (except for hw death and unplugged cables ofc). Which means everything that could fail (like configuration checking, resources assignments and buffer management) must be done irrespective from ->active. ->active is really only a toggle to change the hardware state. More precisely: - Drivers MUST NOT look at ->active in their ->atomic_check callbacks. Changes to ->active MUST always suceed if nothing else changes. - Drivers using the atomic helpers MUST NOT look at ->active anywhere, period. The helpers will take care of calling the respective enable/modeset/disable hooks as necessary. As before the helpers will carefully keep track of the state and not call any hooks unecessarily, so still no double-disables or enables like with crtc helpers. - ->mode_set hooks are only called when the mode or output configuration changes, not for changes in ->active state. - Drivers which reconstruct the state objects in their ->reset hooks or through some other hw state readout infrastructure must ensure that ->active reflects actual hw state. This just implements the core bits and helper logic, a subsequent patch will implement the helper code to implement legacy dpms with this. v2: Rebase on top of the drm ioctl work: - Move crtc checks to the core check function. - Also check for ->active_changed when deciding whether a modeset might happen (for the ALLOW_MODESET mode). - Expose the ->active state with an atomic prop. v3: Review from Rob - Spelling fix in comment. - Extract needs_modeset helper to consolidate the ->mode_changed || ->active_changed checks. v4: Fixup fumble between crtc->state and crtc_state. Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-01-22 15:36:21 +00:00
}
return 0;
}
EXPORT_SYMBOL(drm_crtc_init_with_planes);
/**
* drm_crtc_cleanup - Clean up the core crtc usage
* @crtc: CRTC to cleanup
*
* This function cleans up @crtc and removes it from the DRM mode setting
* core. Note that the function does *not* free the crtc structure itself,
* this is the responsibility of the caller.
*/
void drm_crtc_cleanup(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
/* Note that the crtc_list is considered to be static; should we
* remove the drm_crtc at runtime we would have to decrement all
* the indices on the drm_crtc after us in the crtc_list.
*/
drm: Add API for capturing frame CRCs Adds files and directories to debugfs for controlling and reading frame CRCs, per CRTC: dri/0/crtc-0/crc dri/0/crtc-0/crc/control dri/0/crtc-0/crc/data Drivers can implement the set_crc_source callback() in drm_crtc_funcs to start and stop generating frame CRCs and can add entries to the output by calling drm_crtc_add_crc_entry. v2: - Lots of good fixes suggested by Thierry. - Added documentation. - Changed the debugfs layout. - Moved to allocate the entries circular queue once when frame generation gets enabled for the first time. v3: - Use the control file just to select the source, and start and stop capture when the data file is opened and closed, respectively. - Make variable the number of CRC values per entry, per source. - Allocate entries queue each time we start capturing as now there isn't a fixed number of CRC values per entry. - Store the frame counter in the data file as a 8-digit hex number. - For sources that cannot provide useful frame numbers, place XXXXXXXX in the frame field. v4: - Build only if CONFIG_DEBUG_FS is enabled. - Use memdup_user_nul. - Consolidate calculation of the size of an entry in a helper. - Add 0x prefix to hex numbers in the data file. - Remove unnecessary snprintf and strlen usage in read callback. v5: - Made the crcs array in drm_crtc_crc_entry fixed-size - Lots of other smaller improvements suggested by Emil Velikov v7: - Move definition of drm_debugfs_crtc_crc_add to drm_internal.h v8: - Call debugfs_remove_recursive when we fail to create the minor device v9: - Register the debugfs directory for a crtc from drm_crtc_register_all() v10: - Don't let debugfs failures interrupt CRTC registration (Emil Velikov) v11: - Remove extra brace that broke compilation. Sorry! Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475767268-14379-3-git-send-email-tomeu.vizoso@collabora.com
2016-10-06 15:21:06 +00:00
drm_crtc_crc_fini(crtc);
kfree(crtc->gamma_store);
crtc->gamma_store = NULL;
drm_modeset_lock_fini(&crtc->mutex);
drm_mode_object_unregister(dev, &crtc->base);
list_del(&crtc->head);
dev->mode_config.num_crtc--;
WARN_ON(crtc->state && !crtc->funcs->atomic_destroy_state);
if (crtc->state && crtc->funcs->atomic_destroy_state)
crtc->funcs->atomic_destroy_state(crtc, crtc->state);
kfree(crtc->name);
memset(crtc, 0, sizeof(*crtc));
}
EXPORT_SYMBOL(drm_crtc_cleanup);
int drm_modeset_register_all(struct drm_device *dev)
{
int ret;
ret = drm_plane_register_all(dev);
if (ret)
goto err_plane;
ret = drm_crtc_register_all(dev);
if (ret)
goto err_crtc;
ret = drm_encoder_register_all(dev);
if (ret)
goto err_encoder;
ret = drm_connector_register_all(dev);
if (ret)
goto err_connector;
return 0;
err_connector:
drm_encoder_unregister_all(dev);
err_encoder:
drm_crtc_unregister_all(dev);
err_crtc:
drm_plane_unregister_all(dev);
err_plane:
return ret;
}
void drm_modeset_unregister_all(struct drm_device *dev)
{
drm_connector_unregister_all(dev);
drm_encoder_unregister_all(dev);
drm_crtc_unregister_all(dev);
drm_plane_unregister_all(dev);
}
static int drm_mode_create_standard_properties(struct drm_device *dev)
{
struct drm_property *prop;
int ret;
ret = drm_connector_create_standard_properties(dev);
if (ret)
return ret;
prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
"type", drm_plane_type_enum_list,
ARRAY_SIZE(drm_plane_type_enum_list));
if (!prop)
return -ENOMEM;
dev->mode_config.plane_type_property = prop;
prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
"SRC_X", 0, UINT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_src_x = prop;
prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
"SRC_Y", 0, UINT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_src_y = prop;
prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
"SRC_W", 0, UINT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_src_w = prop;
prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
"SRC_H", 0, UINT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_src_h = prop;
prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC,
"CRTC_X", INT_MIN, INT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_crtc_x = prop;
prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC,
"CRTC_Y", INT_MIN, INT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_crtc_y = prop;
prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
"CRTC_W", 0, INT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_crtc_w = prop;
prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
"CRTC_H", 0, INT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_crtc_h = prop;
prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC,
"FB_ID", DRM_MODE_OBJECT_FB);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_fb_id = prop;
prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC,
"CRTC_ID", DRM_MODE_OBJECT_CRTC);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_crtc_id = prop;
drm/atomic: Add drm_crtc_state->active This is the infrastructure for DPMS ported to the atomic world. Fundamental changes compare to legacy DPMS are: - No more per-connector dpms state, instead there's just one per each display pipeline. So if you clone either you have to unclone first if you only want to switch off one screen, or you just switch of everything (like all desktops do). This massively reduces complexity for cloning since now there's no more half-enabled cloned configs to consider. - Only on/off, dpms standby/suspend are as dead as real CRTs. Again reduces complexity a lot. Now especially for backwards compat the really important part for dpms support is that dpms on always succeeds (except for hw death and unplugged cables ofc). Which means everything that could fail (like configuration checking, resources assignments and buffer management) must be done irrespective from ->active. ->active is really only a toggle to change the hardware state. More precisely: - Drivers MUST NOT look at ->active in their ->atomic_check callbacks. Changes to ->active MUST always suceed if nothing else changes. - Drivers using the atomic helpers MUST NOT look at ->active anywhere, period. The helpers will take care of calling the respective enable/modeset/disable hooks as necessary. As before the helpers will carefully keep track of the state and not call any hooks unecessarily, so still no double-disables or enables like with crtc helpers. - ->mode_set hooks are only called when the mode or output configuration changes, not for changes in ->active state. - Drivers which reconstruct the state objects in their ->reset hooks or through some other hw state readout infrastructure must ensure that ->active reflects actual hw state. This just implements the core bits and helper logic, a subsequent patch will implement the helper code to implement legacy dpms with this. v2: Rebase on top of the drm ioctl work: - Move crtc checks to the core check function. - Also check for ->active_changed when deciding whether a modeset might happen (for the ALLOW_MODESET mode). - Expose the ->active state with an atomic prop. v3: Review from Rob - Spelling fix in comment. - Extract needs_modeset helper to consolidate the ->mode_changed || ->active_changed checks. v4: Fixup fumble between crtc->state and crtc_state. Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-01-22 15:36:21 +00:00
prop = drm_property_create_bool(dev, DRM_MODE_PROP_ATOMIC,
"ACTIVE");
if (!prop)
return -ENOMEM;
dev->mode_config.prop_active = prop;
prop = drm_property_create(dev,
DRM_MODE_PROP_ATOMIC | DRM_MODE_PROP_BLOB,
"MODE_ID", 0);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_mode_id = prop;
drm: introduce pipe color correction properties Patch based on a previous series by Shashank Sharma. This introduces optional properties to enable color correction at the pipe level. It relies on 3 transformations applied to every pixels displayed. First a lookup into a degamma table, then a multiplication of the rgb components by a 3x3 matrix and finally another lookup into a gamma table. The following properties can be added to a pipe : - DEGAMMA_LUT : blob containing degamma LUT - DEGAMMA_LUT_SIZE : number of elements in DEGAMMA_LUT - CTM : transformation matrix applied after the degamma LUT - GAMMA_LUT : blob containing gamma LUT - GAMMA_LUT_SIZE : number of elements in GAMMA_LUT DEGAMMA_LUT_SIZE and GAMMA_LUT_SIZE are read only properties, set by the driver to tell userspace applications what sizes should be the lookup tables in DEGAMMA_LUT and GAMMA_LUT. A helper is also provided so legacy gamma correction is redirected through these new properties. v2: Register LUT size properties as range v3: Fix round in drm_color_lut_get_value() helper More docs on how degamma/gamma properties are used v4: Update contributors v5: Rename CTM_MATRIX property to CTM (Doh!) Add legacy gamma_set atomic helper Describe CTM/LUT acronyms in the kernel doc v6: Fix missing blob unref in drm_atomic_helper_crtc_reset Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Kumar, Kiran S <kiran.s.kumar@intel.com> Signed-off-by: Kausal Malladi <kausalmalladi@gmail.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Rob Bradford <robert.bradford@intel.com> [danvet: CrOS maintainers are also happy with the userspacde side: https://codereview.chromium.org/1182063002/ ] Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1456506302-640-4-git-send-email-lionel.g.landwerlin@intel.com
2016-02-26 17:05:00 +00:00
prop = drm_property_create(dev,
DRM_MODE_PROP_BLOB,
"DEGAMMA_LUT", 0);
if (!prop)
return -ENOMEM;
dev->mode_config.degamma_lut_property = prop;
prop = drm_property_create_range(dev,
DRM_MODE_PROP_IMMUTABLE,
"DEGAMMA_LUT_SIZE", 0, UINT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.degamma_lut_size_property = prop;
prop = drm_property_create(dev,
DRM_MODE_PROP_BLOB,
"CTM", 0);
if (!prop)
return -ENOMEM;
dev->mode_config.ctm_property = prop;
prop = drm_property_create(dev,
DRM_MODE_PROP_BLOB,
"GAMMA_LUT", 0);
if (!prop)
return -ENOMEM;
dev->mode_config.gamma_lut_property = prop;
prop = drm_property_create_range(dev,
DRM_MODE_PROP_IMMUTABLE,
"GAMMA_LUT_SIZE", 0, UINT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.gamma_lut_size_property = prop;
return 0;
}
/**
* drm_mode_getresources - get graphics configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Construct a set of configuration description structures and return
* them to the user, including CRTC, connector and framebuffer configuration.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_getresources(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_card_res *card_res = data;
struct list_head *lh;
struct drm_framebuffer *fb;
struct drm_connector *connector;
struct drm_crtc *crtc;
struct drm_encoder *encoder;
int ret = 0;
int connector_count = 0;
int crtc_count = 0;
int fb_count = 0;
int encoder_count = 0;
int copied = 0;
uint32_t __user *fb_id;
uint32_t __user *crtc_id;
uint32_t __user *connector_id;
uint32_t __user *encoder_id;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
drm: revamp locking around fb creation/destruction Well, at least step 1. The goal here is that framebuffer objects can survive outside of the mode_config lock, with just a reference held as protection. The first step to get there is to introduce a special fb_lock which protects fb lookup, creation and destruction, to make them appear atomic. This new fb_lock can nest within the mode_config lock. But the idea is (once the reference counting part is completed) that we only quickly take that fb_lock to lookup a framebuffer and grab a reference, without any other locks involved. vmwgfx is the only driver which does framebuffer lookups itself, also wrap those calls to drm_mode_object_find with the new lock. Also protect the fb_list walking in i915 and omapdrm with the new lock. As a slight complication there's also the list of user-created fbs attached to the file private. The problem now is that at fclose() time we need to walk that list, eventually do a modeset call to remove the fb from active usage (and are required to be able to take the mode_config lock), but in the end we need to grab the new fb_lock to remove the fb from the list. The easiest solution is to add another mutex to protect this per-file list. Currently that new fbs_lock nests within the modeset locks and so appears redudant. But later patches will switch around this sequence so that taking the modeset locks in the fb destruction path is optional in the fastpath. Ultimately the goal is that addfb and rmfb do not require the mode_config lock, since otherwise they have the potential to introduce stalls in the pageflip sequence of a compositor (if the compositor e.g. switches to a fullscreen client or if it enables a plane). But that requires a few more steps and hoops to jump through. Note that framebuffer creation/destruction is now double-protected - once by the fb_lock and in parts by the idr_lock. The later would be unnecessariy if framebuffers would have their own idr allocator. But that's material for another patch (series). v2: Properly initialize the fb->filp_head list in _init, otherwise the newly added WARN to check whether the fb isn't on a fpriv list any more will fail for driver-private objects. v3: Fixup two error-case unlock bugs spotted by Richard Wilbur. Reviewed-by: Rob Clark <rob@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-10 20:19:18 +00:00
mutex_lock(&file_priv->fbs_lock);
/*
* For the non-control nodes we need to limit the list of resources
* by IDs in the group list for this node
*/
list_for_each(lh, &file_priv->fbs)
fb_count++;
drm: revamp locking around fb creation/destruction Well, at least step 1. The goal here is that framebuffer objects can survive outside of the mode_config lock, with just a reference held as protection. The first step to get there is to introduce a special fb_lock which protects fb lookup, creation and destruction, to make them appear atomic. This new fb_lock can nest within the mode_config lock. But the idea is (once the reference counting part is completed) that we only quickly take that fb_lock to lookup a framebuffer and grab a reference, without any other locks involved. vmwgfx is the only driver which does framebuffer lookups itself, also wrap those calls to drm_mode_object_find with the new lock. Also protect the fb_list walking in i915 and omapdrm with the new lock. As a slight complication there's also the list of user-created fbs attached to the file private. The problem now is that at fclose() time we need to walk that list, eventually do a modeset call to remove the fb from active usage (and are required to be able to take the mode_config lock), but in the end we need to grab the new fb_lock to remove the fb from the list. The easiest solution is to add another mutex to protect this per-file list. Currently that new fbs_lock nests within the modeset locks and so appears redudant. But later patches will switch around this sequence so that taking the modeset locks in the fb destruction path is optional in the fastpath. Ultimately the goal is that addfb and rmfb do not require the mode_config lock, since otherwise they have the potential to introduce stalls in the pageflip sequence of a compositor (if the compositor e.g. switches to a fullscreen client or if it enables a plane). But that requires a few more steps and hoops to jump through. Note that framebuffer creation/destruction is now double-protected - once by the fb_lock and in parts by the idr_lock. The later would be unnecessariy if framebuffers would have their own idr allocator. But that's material for another patch (series). v2: Properly initialize the fb->filp_head list in _init, otherwise the newly added WARN to check whether the fb isn't on a fpriv list any more will fail for driver-private objects. v3: Fixup two error-case unlock bugs spotted by Richard Wilbur. Reviewed-by: Rob Clark <rob@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-10 20:19:18 +00:00
/* handle this in 4 parts */
/* FBs */
if (card_res->count_fbs >= fb_count) {
copied = 0;
fb_id = (uint32_t __user *)(unsigned long)card_res->fb_id_ptr;
list_for_each_entry(fb, &file_priv->fbs, filp_head) {
if (put_user(fb->base.id, fb_id + copied)) {
mutex_unlock(&file_priv->fbs_lock);
return -EFAULT;
}
copied++;
}
}
card_res->count_fbs = fb_count;
mutex_unlock(&file_priv->fbs_lock);
/* mode_config.mutex protects the connector list against e.g. DP MST
* connector hot-adding. CRTC/Plane lists are invariant. */
mutex_lock(&dev->mode_config.mutex);
drm_for_each_crtc(crtc, dev)
crtc_count++;
drm_for_each_connector(connector, dev)
connector_count++;
drm_for_each_encoder(encoder, dev)
encoder_count++;
card_res->max_height = dev->mode_config.max_height;
card_res->min_height = dev->mode_config.min_height;
card_res->max_width = dev->mode_config.max_width;
card_res->min_width = dev->mode_config.min_width;
/* CRTCs */
if (card_res->count_crtcs >= crtc_count) {
copied = 0;
crtc_id = (uint32_t __user *)(unsigned long)card_res->crtc_id_ptr;
drm_for_each_crtc(crtc, dev) {
if (put_user(crtc->base.id, crtc_id + copied)) {
ret = -EFAULT;
goto out;
}
copied++;
}
}
card_res->count_crtcs = crtc_count;
/* Encoders */
if (card_res->count_encoders >= encoder_count) {
copied = 0;
encoder_id = (uint32_t __user *)(unsigned long)card_res->encoder_id_ptr;
drm_for_each_encoder(encoder, dev) {
if (put_user(encoder->base.id, encoder_id +
copied)) {
ret = -EFAULT;
goto out;
}
copied++;
}
}
card_res->count_encoders = encoder_count;
/* Connectors */
if (card_res->count_connectors >= connector_count) {
copied = 0;
connector_id = (uint32_t __user *)(unsigned long)card_res->connector_id_ptr;
drm_for_each_connector(connector, dev) {
if (put_user(connector->base.id,
connector_id + copied)) {
ret = -EFAULT;
goto out;
}
copied++;
}
}
card_res->count_connectors = connector_count;
out:
mutex_unlock(&dev->mode_config.mutex);
return ret;
}
/**
* drm_mode_getcrtc - get CRTC configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Construct a CRTC configuration structure to return to the user.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_getcrtc(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_crtc *crtc_resp = data;
struct drm_crtc *crtc;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
crtc = drm_crtc_find(dev, crtc_resp->crtc_id);
if (!crtc)
return -ENOENT;
drm_modeset_lock_crtc(crtc, crtc->primary);
crtc_resp->gamma_size = crtc->gamma_size;
if (crtc->primary->fb)
crtc_resp->fb_id = crtc->primary->fb->base.id;
else
crtc_resp->fb_id = 0;
if (crtc->state) {
crtc_resp->x = crtc->primary->state->src_x >> 16;
crtc_resp->y = crtc->primary->state->src_y >> 16;
if (crtc->state->enable) {
drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->state->mode);
crtc_resp->mode_valid = 1;
} else {
crtc_resp->mode_valid = 0;
}
} else {
crtc_resp->x = crtc->x;
crtc_resp->y = crtc->y;
if (crtc->enabled) {
drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->mode);
crtc_resp->mode_valid = 1;
} else {
crtc_resp->mode_valid = 0;
}
}
drm_modeset_unlock_crtc(crtc);
return 0;
}
/**
* drm_mode_set_config_internal - helper to call ->set_config
* @set: modeset config to set
*
* This is a little helper to wrap internal calls to the ->set_config driver
* interface. The only thing it adds is correct refcounting dance.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_set_config_internal(struct drm_mode_set *set)
{
struct drm_crtc *crtc = set->crtc;
struct drm_framebuffer *fb;
struct drm_crtc *tmp;
int ret;
/*
* NOTE: ->set_config can also disable other crtcs (if we steal all
* connectors from it), hence we need to refcount the fbs across all
* crtcs. Atomic modeset will have saner semantics ...
*/
drm_for_each_crtc(tmp, crtc->dev)
tmp->primary->old_fb = tmp->primary->fb;
fb = set->fb;
ret = crtc->funcs->set_config(set);
if (ret == 0) {
crtc->primary->crtc = crtc;
drm: Simplify fb refcounting rules around ->update_plane The introduction of primary planes has apparently caused a bit of fb refcounting fun for people. That makes it a good time to clean up the arcane rules and slight differences between ->update_plane and ->set_config. The new rules are: - The core holds a reference for both the new and the old fb (if they're non-NULL of course) while calling into the driver through either ->update_plane or ->set_config. - Drivers may not clobber plane->fb if their callback fails. If they do that, they need to store a pointer to the old fb in it again. When calling into the driver plane->fb still points at the current (old) framebuffer. - The core will update the plane->fb pointer on success. Drivers can do that themselves too, but aren't required to any more for the primary plane. - The core will update fb refcounts for the plane->fb pointer, presuming the drivers hold up their end of the bargain. v2: Remove now unused tmpfb (Thierry) v3: Drop broken changes from drm_mode_setplane (Ville). Also polish the commit message a bit. v4: Also fix up the handling of ->disable_plane in drm_plane_force_disable. The issue was that we didn't save plane->fb over the ->disable_plane call. Just paranoia, nothing relies on this. v5: Keep still useful comments about directly calling ->set_config, which I should have done for v4 already. Requested by Matt. Cc: Thierry Reding <treding@nvidia.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-23 15:34:06 +00:00
crtc->primary->fb = fb;
}
drm_for_each_crtc(tmp, crtc->dev) {
if (tmp->primary->fb)
drm_framebuffer_reference(tmp->primary->fb);
if (tmp->primary->old_fb)
drm_framebuffer_unreference(tmp->primary->old_fb);
tmp->primary->old_fb = NULL;
}
return ret;
}
EXPORT_SYMBOL(drm_mode_set_config_internal);
/**
* drm_crtc_get_hv_timing - Fetches hdisplay/vdisplay for given mode
* @mode: mode to query
* @hdisplay: hdisplay value to fill in
* @vdisplay: vdisplay value to fill in
*
* The vdisplay value will be doubled if the specified mode is a stereo mode of
* the appropriate layout.
*/
void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
int *hdisplay, int *vdisplay)
{
struct drm_display_mode adjusted;
drm_mode_copy(&adjusted, mode);
drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY);
*hdisplay = adjusted.crtc_hdisplay;
*vdisplay = adjusted.crtc_vdisplay;
}
EXPORT_SYMBOL(drm_crtc_get_hv_timing);
/**
* drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
* CRTC viewport
* @crtc: CRTC that framebuffer will be displayed on
* @x: x panning
* @y: y panning
* @mode: mode that framebuffer will be displayed under
* @fb: framebuffer to check size of
*/
int drm_crtc_check_viewport(const struct drm_crtc *crtc,
int x, int y,
const struct drm_display_mode *mode,
const struct drm_framebuffer *fb)
{
int hdisplay, vdisplay;
drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
if (crtc->state &&
drm_rotation_90_or_270(crtc->primary->state->rotation))
swap(hdisplay, vdisplay);
return drm_framebuffer_check_src_coords(x << 16, y << 16,
hdisplay << 16, vdisplay << 16,
fb);
}
EXPORT_SYMBOL(drm_crtc_check_viewport);
/**
* drm_mode_setcrtc - set CRTC configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Build a new CRTC configuration based on user request.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_setcrtc(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_config *config = &dev->mode_config;
struct drm_mode_crtc *crtc_req = data;
struct drm_crtc *crtc;
struct drm_connector **connector_set = NULL, *connector;
struct drm_framebuffer *fb = NULL;
struct drm_display_mode *mode = NULL;
struct drm_mode_set set;
uint32_t __user *set_connectors_ptr;
int ret;
int i;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
/*
* Universal plane src offsets are only 16.16, prevent havoc for
* drivers using universal plane code internally.
*/
if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000)
return -ERANGE;
drm_modeset_lock_all(dev);
crtc = drm_crtc_find(dev, crtc_req->crtc_id);
if (!crtc) {
DRM_DEBUG_KMS("Unknown CRTC ID %d\n", crtc_req->crtc_id);
ret = -ENOENT;
goto out;
}
DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name);
if (crtc_req->mode_valid) {
/* If we have a mode we need a framebuffer. */
/* If we pass -1, set the mode with the currently bound fb */
if (crtc_req->fb_id == -1) {
if (!crtc->primary->fb) {
DRM_DEBUG_KMS("CRTC doesn't have current FB\n");
ret = -EINVAL;
goto out;
}
fb = crtc->primary->fb;
/* Make refcounting symmetric with the lookup path. */
drm_framebuffer_reference(fb);
} else {
fb = drm_framebuffer_lookup(dev, crtc_req->fb_id);
if (!fb) {
DRM_DEBUG_KMS("Unknown FB ID%d\n",
crtc_req->fb_id);
ret = -ENOENT;
goto out;
}
}
mode = drm_mode_create(dev);
if (!mode) {
ret = -ENOMEM;
goto out;
}
ret = drm_mode_convert_umode(mode, &crtc_req->mode);
if (ret) {
DRM_DEBUG_KMS("Invalid mode\n");
goto out;
}
/*
* Check whether the primary plane supports the fb pixel format.
* Drivers not implementing the universal planes API use a
* default formats list provided by the DRM core which doesn't
* match real hardware capabilities. Skip the check in that
* case.
*/
if (!crtc->primary->format_default) {
ret = drm_plane_check_pixel_format(crtc->primary,
fb->pixel_format);
if (ret) {
char *format_name = drm_get_format_name(fb->pixel_format);
DRM_DEBUG_KMS("Invalid pixel format %s\n", format_name);
kfree(format_name);
goto out;
}
}
ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y,
mode, fb);
if (ret)
goto out;
}
if (crtc_req->count_connectors == 0 && mode) {
DRM_DEBUG_KMS("Count connectors is 0 but mode set\n");
ret = -EINVAL;
goto out;
}
if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
DRM_DEBUG_KMS("Count connectors is %d but no mode or fb set\n",
crtc_req->count_connectors);
ret = -EINVAL;
goto out;
}
if (crtc_req->count_connectors > 0) {
u32 out_id;
/* Avoid unbounded kernel memory allocation */
if (crtc_req->count_connectors > config->num_connector) {
ret = -EINVAL;
goto out;
}
connector_set = kmalloc_array(crtc_req->count_connectors,
sizeof(struct drm_connector *),
GFP_KERNEL);
if (!connector_set) {
ret = -ENOMEM;
goto out;
}
for (i = 0; i < crtc_req->count_connectors; i++) {
connector_set[i] = NULL;
set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr;
if (get_user(out_id, &set_connectors_ptr[i])) {
ret = -EFAULT;
goto out;
}
connector = drm_connector_lookup(dev, out_id);
if (!connector) {
DRM_DEBUG_KMS("Connector id %d unknown\n",
out_id);
ret = -ENOENT;
goto out;
}
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
connector->base.id,
connector->name);
connector_set[i] = connector;
}
}
set.crtc = crtc;
set.x = crtc_req->x;
set.y = crtc_req->y;
set.mode = mode;
set.connectors = connector_set;
set.num_connectors = crtc_req->count_connectors;
set.fb = fb;
ret = drm_mode_set_config_internal(&set);
out:
if (fb)
drm_framebuffer_unreference(fb);
if (connector_set) {
for (i = 0; i < crtc_req->count_connectors; i++) {
if (connector_set[i])
drm_connector_unreference(connector_set[i]);
}
}
kfree(connector_set);
drm_mode_destroy(dev, mode);
drm_modeset_unlock_all(dev);
return ret;
}
int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t value)
{
int ret = -EINVAL;
struct drm_crtc *crtc = obj_to_crtc(obj);
if (crtc->funcs->set_property)
ret = crtc->funcs->set_property(crtc, property, value);
if (!ret)
drm_object_property_set_value(obj, property, value);
return ret;
}
/**
* drm_mode_config_reset - call ->reset callbacks
* @dev: drm device
*
* This functions calls all the crtc's, encoder's and connector's ->reset
* callback. Drivers can use this in e.g. their driver load or resume code to
* reset hardware and software state.
*/
void drm_mode_config_reset(struct drm_device *dev)
{
struct drm_crtc *crtc;
struct drm_plane *plane;
struct drm_encoder *encoder;
struct drm_connector *connector;
drm_for_each_plane(plane, dev)
if (plane->funcs->reset)
plane->funcs->reset(plane);
drm_for_each_crtc(crtc, dev)
if (crtc->funcs->reset)
crtc->funcs->reset(crtc);
drm_for_each_encoder(encoder, dev)
if (encoder->funcs->reset)
encoder->funcs->reset(encoder);
mutex_lock(&dev->mode_config.mutex);
drm_for_each_connector(connector, dev)
if (connector->funcs->reset)
connector->funcs->reset(connector);
mutex_unlock(&dev->mode_config.mutex);
}
EXPORT_SYMBOL(drm_mode_config_reset);
/**
* drm_mode_create_dumb_ioctl - create a dumb backing storage buffer
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* This creates a new dumb buffer in the driver's backing storage manager (GEM,
* TTM or something else entirely) and returns the resulting buffer handle. This
* handle can then be wrapped up into a framebuffer modeset object.
*
* Note that userspace is not allowed to use such objects for render
* acceleration - drivers must create their own private ioctls for such a use
* case.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_create_dumb_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_create_dumb *args = data;
u32 cpp, stride, size;
if (!dev->driver->dumb_create)
return -ENOSYS;
if (!args->width || !args->height || !args->bpp)
return -EINVAL;
/* overflow checks for 32bit size calculations */
/* NOTE: DIV_ROUND_UP() can overflow */
cpp = DIV_ROUND_UP(args->bpp, 8);
if (!cpp || cpp > 0xffffffffU / args->width)
return -EINVAL;
stride = cpp * args->width;
if (args->height > 0xffffffffU / stride)
return -EINVAL;
/* test for wrap-around */
size = args->height * stride;
if (PAGE_ALIGN(size) == 0)
return -EINVAL;
/*
* handle, pitch and size are output parameters. Zero them out to
* prevent drivers from accidentally using uninitialized data. Since
* not all existing userspace is clearing these fields properly we
* cannot reject IOCTL with garbage in them.
*/
args->handle = 0;
args->pitch = 0;
args->size = 0;
return dev->driver->dumb_create(file_priv, dev, args);
}
/**
* drm_mode_mmap_dumb_ioctl - create an mmap offset for a dumb backing storage buffer
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* Allocate an offset in the drm device node's address space to be able to
* memory map a dumb buffer.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_mmap_dumb_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_map_dumb *args = data;
/* call driver ioctl to get mmap offset */
if (!dev->driver->dumb_map_offset)
return -ENOSYS;
return dev->driver->dumb_map_offset(file_priv, dev, args->handle, &args->offset);
}
/**
* drm_mode_destroy_dumb_ioctl - destroy a dumb backing strage buffer
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* This destroys the userspace handle for the given dumb backing storage buffer.
* Since buffer objects must be reference counted in the kernel a buffer object
* won't be immediately freed if a framebuffer modeset object still uses it.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_destroy_dumb_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_destroy_dumb *args = data;
if (!dev->driver->dumb_destroy)
return -ENOSYS;
return dev->driver->dumb_destroy(file_priv, dev, args->handle);
}
/**
* drm_mode_config_init - initialize DRM mode_configuration structure
* @dev: DRM device
*
* Initialize @dev's mode_config structure, used for tracking the graphics
* configuration of @dev.
*
* Since this initializes the modeset locks, no locking is possible. Which is no
* problem, since this should happen single threaded at init time. It is the
* driver's problem to ensure this guarantee.
*
*/
void drm_mode_config_init(struct drm_device *dev)
{
mutex_init(&dev->mode_config.mutex);
drm_modeset_lock_init(&dev->mode_config.connection_mutex);
mutex_init(&dev->mode_config.idr_mutex);
mutex_init(&dev->mode_config.fb_lock);
mutex_init(&dev->mode_config.blob_lock);
INIT_LIST_HEAD(&dev->mode_config.fb_list);
INIT_LIST_HEAD(&dev->mode_config.crtc_list);
INIT_LIST_HEAD(&dev->mode_config.connector_list);
INIT_LIST_HEAD(&dev->mode_config.encoder_list);
INIT_LIST_HEAD(&dev->mode_config.property_list);
INIT_LIST_HEAD(&dev->mode_config.property_blob_list);
INIT_LIST_HEAD(&dev->mode_config.plane_list);
idr_init(&dev->mode_config.crtc_idr);
idr_init(&dev->mode_config.tile_idr);
ida_init(&dev->mode_config.connector_ida);
drm_modeset_lock_all(dev);
drm_mode_create_standard_properties(dev);
drm_modeset_unlock_all(dev);
/* Just to be sure */
dev->mode_config.num_fb = 0;
dev->mode_config.num_connector = 0;
dev->mode_config.num_crtc = 0;
dev->mode_config.num_encoder = 0;
dev->mode_config.num_overlay_plane = 0;
dev->mode_config.num_total_plane = 0;
}
EXPORT_SYMBOL(drm_mode_config_init);
/**
* drm_mode_config_cleanup - free up DRM mode_config info
* @dev: DRM device
*
* Free up all the connectors and CRTCs associated with this DRM device, then
* free up the framebuffers and associated buffer objects.
*
* Note that since this /should/ happen single-threaded at driver/device
* teardown time, no locking is required. It's the driver's job to ensure that
* this guarantee actually holds true.
*
* FIXME: cleanup any dangling user buffer objects too
*/
void drm_mode_config_cleanup(struct drm_device *dev)
{
struct drm_connector *connector, *ot;
struct drm_crtc *crtc, *ct;
struct drm_encoder *encoder, *enct;
struct drm_framebuffer *fb, *fbt;
struct drm_property *property, *pt;
struct drm_property_blob *blob, *bt;
struct drm_plane *plane, *plt;
list_for_each_entry_safe(encoder, enct, &dev->mode_config.encoder_list,
head) {
encoder->funcs->destroy(encoder);
}
list_for_each_entry_safe(connector, ot,
&dev->mode_config.connector_list, head) {
connector->funcs->destroy(connector);
}
list_for_each_entry_safe(property, pt, &dev->mode_config.property_list,
head) {
drm_property_destroy(dev, property);
}
list_for_each_entry_safe(plane, plt, &dev->mode_config.plane_list,
head) {
plane->funcs->destroy(plane);
}
list_for_each_entry_safe(crtc, ct, &dev->mode_config.crtc_list, head) {
crtc->funcs->destroy(crtc);
}
list_for_each_entry_safe(blob, bt, &dev->mode_config.property_blob_list,
head_global) {
drm_property_unreference_blob(blob);
}
/*
* Single-threaded teardown context, so it's not required to grab the
* fb_lock to protect against concurrent fb_list access. Contrary, it
* would actually deadlock with the drm_framebuffer_cleanup function.
*
* Also, if there are any framebuffers left, that's a driver leak now,
* so politely WARN about this.
*/
WARN_ON(!list_empty(&dev->mode_config.fb_list));
list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) {
drm_framebuffer_free(&fb->base.refcount);
}
ida_destroy(&dev->mode_config.connector_ida);
idr_destroy(&dev->mode_config.tile_idr);
idr_destroy(&dev->mode_config.crtc_idr);
drm_modeset_lock_fini(&dev->mode_config.connection_mutex);
}
EXPORT_SYMBOL(drm_mode_config_cleanup);
/**
* DOC: Tile group
*
* Tile groups are used to represent tiled monitors with a unique
* integer identifier. Tiled monitors using DisplayID v1.3 have
* a unique 8-byte handle, we store this in a tile group, so we
* have a common identifier for all tiles in a monitor group.
*/
static void drm_tile_group_free(struct kref *kref)
{
struct drm_tile_group *tg = container_of(kref, struct drm_tile_group, refcount);
struct drm_device *dev = tg->dev;
mutex_lock(&dev->mode_config.idr_mutex);
idr_remove(&dev->mode_config.tile_idr, tg->id);
mutex_unlock(&dev->mode_config.idr_mutex);
kfree(tg);
}
/**
* drm_mode_put_tile_group - drop a reference to a tile group.
* @dev: DRM device
* @tg: tile group to drop reference to.
*
* drop reference to tile group and free if 0.
*/
void drm_mode_put_tile_group(struct drm_device *dev,
struct drm_tile_group *tg)
{
kref_put(&tg->refcount, drm_tile_group_free);
}
/**
* drm_mode_get_tile_group - get a reference to an existing tile group
* @dev: DRM device
* @topology: 8-bytes unique per monitor.
*
* Use the unique bytes to get a reference to an existing tile group.
*
* RETURNS:
* tile group or NULL if not found.
*/
struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
char topology[8])
{
struct drm_tile_group *tg;
int id;
mutex_lock(&dev->mode_config.idr_mutex);
idr_for_each_entry(&dev->mode_config.tile_idr, tg, id) {
if (!memcmp(tg->group_data, topology, 8)) {
if (!kref_get_unless_zero(&tg->refcount))
tg = NULL;
mutex_unlock(&dev->mode_config.idr_mutex);
return tg;
}
}
mutex_unlock(&dev->mode_config.idr_mutex);
return NULL;
}
EXPORT_SYMBOL(drm_mode_get_tile_group);
/**
* drm_mode_create_tile_group - create a tile group from a displayid description
* @dev: DRM device
* @topology: 8-bytes unique per monitor.
*
* Create a tile group for the unique monitor, and get a unique
* identifier for the tile group.
*
* RETURNS:
* new tile group or error.
*/
struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
char topology[8])
{
struct drm_tile_group *tg;
int ret;
tg = kzalloc(sizeof(*tg), GFP_KERNEL);
if (!tg)
return ERR_PTR(-ENOMEM);
kref_init(&tg->refcount);
memcpy(tg->group_data, topology, 8);
tg->dev = dev;
mutex_lock(&dev->mode_config.idr_mutex);
ret = idr_alloc(&dev->mode_config.tile_idr, tg, 1, 0, GFP_KERNEL);
if (ret >= 0) {
tg->id = ret;
} else {
kfree(tg);
tg = ERR_PTR(ret);
}
mutex_unlock(&dev->mode_config.idr_mutex);
return tg;
}
EXPORT_SYMBOL(drm_mode_create_tile_group);