linux-stable/tools/perf/builtin-bench.c

348 lines
9.4 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* builtin-bench.c
*
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
* General benchmarking collections provided by perf
*
* Copyright (C) 2009, Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
*/
/*
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
* Available benchmark collection list:
*
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
* sched ... scheduler and IPC performance
perf bench: Add basic syscall benchmark The usefulness of having a standard way of testing syscall performance has come up from time to time[0]. Furthermore, some of our testing machinery (such as 'mmtests') already makes use of a simplified version of the microbenchmark. This patch mainly takes the same idea to measure syscall throughput compatible with 'perf-bench' via getppid(2), yet without any of the additional template stuff from Ingo's version (based on numa.c). The code is identical to what mmtests uses. [0] https://lore.kernel.org/lkml/20160201074156.GA27156@gmail.com/ Committer notes: Add mising stdlib.h and unistd.h to get the prototypes for exit() and getppid(). Committer testing: $ perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks syscall: System call benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks internals: Perf-internals benchmarks all: All benchmarks $ $ perf bench syscall # List of available benchmarks for collection 'syscall': basic: Benchmark for basic getppid(2) calls all: Run all syscall benchmarks $ perf bench syscall basic # Running 'syscall/basic' benchmark: # Executed 10000000 getppid() calls Total time: 3.679 [sec] 0.367957 usecs/op 2717708 ops/sec $ perf bench syscall all # Running syscall/basic benchmark... # Executed 10000000 getppid() calls Total time: 3.644 [sec] 0.364456 usecs/op 2743815 ops/sec $ Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20190308181747.l36zqz2avtivrr3c@linux-r8p5 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-08 18:17:47 +00:00
* syscall ... System call performance
* mem ... memory access performance
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
* numa ... NUMA scheduling and MM performance
* futex ... Futex performance
perf bench: Add epoll parallel epoll_wait benchmark This program benchmarks concurrent epoll_wait(2) for file descriptors that are monitored with with EPOLLIN along various semantics, by a single epoll instance. Such conditions can be found when using single/combined or multiple queuing when load balancing. Each thread has a number of private, nonblocking file descriptors, referred to as fdmap. A writer thread will constantly be writing to the fdmaps of all threads, minimizing each threads's chances of epoll_wait not finding any ready read events and blocking as this is not what we want to stress. Full details in the start of the C file. Committer testing: # perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks all: All benchmarks # perf bench epoll # List of available benchmarks for collection 'epoll': wait: Benchmark epoll concurrent epoll_waits all: Run all futex benchmarks # perf bench epoll wait # Running 'epoll/wait' benchmark: Run summary [PID 19295]: 3 threads monitoring on 64 file-descriptors for 8 secs. [thread 0] fdmap: 0xdaa650 ... 0xdaa74c [ 328241 ops/sec ] [thread 1] fdmap: 0xdaa900 ... 0xdaa9fc [ 351695 ops/sec ] [thread 2] fdmap: 0xdaabb0 ... 0xdaacac [ 381423 ops/sec ] Averaged 353786 operations/sec (+- 4.35%), total secs = 8 # Committer notes: Fix the build on debian:experimental-x-mips, debian:experimental-x-mipsel and others: CC /tmp/build/perf/bench/epoll-wait.o bench/epoll-wait.c: In function 'writerfn': bench/epoll-wait.c:399:12: error: format '%ld' expects argument of type 'long int', but argument 2 has type 'size_t' {aka 'unsigned int'} [-Werror=format=] printinfo("exiting writer-thread (total full-loops: %ld)\n", iter); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~ bench/epoll-wait.c:86:31: note: in definition of macro 'printinfo' do { if (__verbose) { printf(fmt, ## arg); fflush(stdout); } } while (0) ^~~ cc1: all warnings being treated as errors Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> <jbaron@akamai.com> Link: http://lkml.kernel.org/r/20181106152226.20883-2-dave@stgolabs.net Link: http://lkml.kernel.org/r/20181106182349.thdkpvshkna5vd7o@linux-r8p5> [ Applied above fixup as per Davidlohr's request ] [ Use inttypes.h to print rlim_t fields, fixing the build on Alpine Linux / musl libc ] [ Check if eventfd() is available, i.e. if HAVE_EVENTFD is defined ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-06 15:22:25 +00:00
* epoll ... Event poll performance
*/
#include <subcmd/parse-options.h>
#include "builtin.h"
#include "bench/bench.h"
#include <locale.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
#include <sys/prctl.h>
#include <linux/zalloc.h>
typedef int (*bench_fn_t)(int argc, const char **argv);
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
struct bench {
const char *name;
const char *summary;
bench_fn_t fn;
};
#ifdef HAVE_LIBNUMA_SUPPORT
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
static struct bench numa_benchmarks[] = {
{ "mem", "Benchmark for NUMA workloads", bench_numa },
{ "all", "Run all NUMA benchmarks", NULL },
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
{ NULL, NULL, NULL }
perf: Add 'perf bench numa mem' NUMA performance measurement suite Add a suite of NUMA performance benchmarks. The goal was simulate the behavior and access patterns of real NUMA workloads, via a wide range of parameters, so this tool goes well beyond simple bzero() measurements that most NUMA micro-benchmarks use: - It processes the data and creates a chain of data dependencies, like a real workload would. Neither the compiler, nor the kernel (via KSM and other optimizations) nor the CPU can eliminate parts of the workload. - It randomizes the initial state and also randomizes the target addresses of the processing - it's not a simple forward scan of addresses. - It provides flexible options to set process, thread and memory relationship information: -G sets "global" memory shared between all test processes, -P sets "process" memory shared by all threads of a process and -T sets "thread" private memory. - There's a NUMA convergence monitoring and convergence latency measurement option via -c and -m. - Micro-sleeps and synchronization can be injected to provoke lock contention and scheduling, via the -u and -S options. This simulates IO and contention. - The -x option instructs the workload to 'perturb' itself artificially every N seconds, by moving to the first and last CPU of the system periodically. This way the stability of convergence equilibrium and the number of steps taken for the scheduler to reach equilibrium again can be measured. - The amount of work can be specified via the -l loop count, and/or via a -s seconds-timeout value. - CPU and node memory binding options, to test hard binding scenarios. THP can be turned on and off via madvise() calls. - Live reporting of convergence progress in an 'at glance' output format. Printing of convergence and deconvergence events. The 'perf bench numa mem -a' option will start an array of about 30 individual tests that will each output such measurements: # Running 5x5-bw-thread, "perf bench numa mem -p 5 -t 5 -P 512 -s 20 -zZ0q --thp 1" 5x5-bw-thread, 20.276, secs, runtime-max/thread 5x5-bw-thread, 20.004, secs, runtime-min/thread 5x5-bw-thread, 20.155, secs, runtime-avg/thread 5x5-bw-thread, 0.671, %, spread-runtime/thread 5x5-bw-thread, 21.153, GB, data/thread 5x5-bw-thread, 528.818, GB, data-total 5x5-bw-thread, 0.959, nsecs, runtime/byte/thread 5x5-bw-thread, 1.043, GB/sec, thread-speed 5x5-bw-thread, 26.081, GB/sec, total-speed See the help text and the code for more details. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-12-06 12:51:59 +00:00
};
#endif
perf: Add 'perf bench numa mem' NUMA performance measurement suite Add a suite of NUMA performance benchmarks. The goal was simulate the behavior and access patterns of real NUMA workloads, via a wide range of parameters, so this tool goes well beyond simple bzero() measurements that most NUMA micro-benchmarks use: - It processes the data and creates a chain of data dependencies, like a real workload would. Neither the compiler, nor the kernel (via KSM and other optimizations) nor the CPU can eliminate parts of the workload. - It randomizes the initial state and also randomizes the target addresses of the processing - it's not a simple forward scan of addresses. - It provides flexible options to set process, thread and memory relationship information: -G sets "global" memory shared between all test processes, -P sets "process" memory shared by all threads of a process and -T sets "thread" private memory. - There's a NUMA convergence monitoring and convergence latency measurement option via -c and -m. - Micro-sleeps and synchronization can be injected to provoke lock contention and scheduling, via the -u and -S options. This simulates IO and contention. - The -x option instructs the workload to 'perturb' itself artificially every N seconds, by moving to the first and last CPU of the system periodically. This way the stability of convergence equilibrium and the number of steps taken for the scheduler to reach equilibrium again can be measured. - The amount of work can be specified via the -l loop count, and/or via a -s seconds-timeout value. - CPU and node memory binding options, to test hard binding scenarios. THP can be turned on and off via madvise() calls. - Live reporting of convergence progress in an 'at glance' output format. Printing of convergence and deconvergence events. The 'perf bench numa mem -a' option will start an array of about 30 individual tests that will each output such measurements: # Running 5x5-bw-thread, "perf bench numa mem -p 5 -t 5 -P 512 -s 20 -zZ0q --thp 1" 5x5-bw-thread, 20.276, secs, runtime-max/thread 5x5-bw-thread, 20.004, secs, runtime-min/thread 5x5-bw-thread, 20.155, secs, runtime-avg/thread 5x5-bw-thread, 0.671, %, spread-runtime/thread 5x5-bw-thread, 21.153, GB, data/thread 5x5-bw-thread, 528.818, GB, data-total 5x5-bw-thread, 0.959, nsecs, runtime/byte/thread 5x5-bw-thread, 1.043, GB/sec, thread-speed 5x5-bw-thread, 26.081, GB/sec, total-speed See the help text and the code for more details. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-12-06 12:51:59 +00:00
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
static struct bench sched_benchmarks[] = {
{ "messaging", "Benchmark for scheduling and IPC", bench_sched_messaging },
{ "pipe", "Benchmark for pipe() between two processes", bench_sched_pipe },
{ "seccomp-notify", "Benchmark for seccomp user notify", bench_sched_seccomp_notify},
{ "all", "Run all scheduler benchmarks", NULL },
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
{ NULL, NULL, NULL }
};
perf bench: Add basic syscall benchmark The usefulness of having a standard way of testing syscall performance has come up from time to time[0]. Furthermore, some of our testing machinery (such as 'mmtests') already makes use of a simplified version of the microbenchmark. This patch mainly takes the same idea to measure syscall throughput compatible with 'perf-bench' via getppid(2), yet without any of the additional template stuff from Ingo's version (based on numa.c). The code is identical to what mmtests uses. [0] https://lore.kernel.org/lkml/20160201074156.GA27156@gmail.com/ Committer notes: Add mising stdlib.h and unistd.h to get the prototypes for exit() and getppid(). Committer testing: $ perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks syscall: System call benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks internals: Perf-internals benchmarks all: All benchmarks $ $ perf bench syscall # List of available benchmarks for collection 'syscall': basic: Benchmark for basic getppid(2) calls all: Run all syscall benchmarks $ perf bench syscall basic # Running 'syscall/basic' benchmark: # Executed 10000000 getppid() calls Total time: 3.679 [sec] 0.367957 usecs/op 2717708 ops/sec $ perf bench syscall all # Running syscall/basic benchmark... # Executed 10000000 getppid() calls Total time: 3.644 [sec] 0.364456 usecs/op 2743815 ops/sec $ Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20190308181747.l36zqz2avtivrr3c@linux-r8p5 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-08 18:17:47 +00:00
static struct bench syscall_benchmarks[] = {
{ "basic", "Benchmark for basic getppid(2) calls", bench_syscall_basic },
{ "getpgid", "Benchmark for getpgid(2) calls", bench_syscall_getpgid },
{ "fork", "Benchmark for fork(2) calls", bench_syscall_fork },
{ "execve", "Benchmark for execve(2) calls", bench_syscall_execve },
perf bench: Add basic syscall benchmark The usefulness of having a standard way of testing syscall performance has come up from time to time[0]. Furthermore, some of our testing machinery (such as 'mmtests') already makes use of a simplified version of the microbenchmark. This patch mainly takes the same idea to measure syscall throughput compatible with 'perf-bench' via getppid(2), yet without any of the additional template stuff from Ingo's version (based on numa.c). The code is identical to what mmtests uses. [0] https://lore.kernel.org/lkml/20160201074156.GA27156@gmail.com/ Committer notes: Add mising stdlib.h and unistd.h to get the prototypes for exit() and getppid(). Committer testing: $ perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks syscall: System call benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks internals: Perf-internals benchmarks all: All benchmarks $ $ perf bench syscall # List of available benchmarks for collection 'syscall': basic: Benchmark for basic getppid(2) calls all: Run all syscall benchmarks $ perf bench syscall basic # Running 'syscall/basic' benchmark: # Executed 10000000 getppid() calls Total time: 3.679 [sec] 0.367957 usecs/op 2717708 ops/sec $ perf bench syscall all # Running syscall/basic benchmark... # Executed 10000000 getppid() calls Total time: 3.644 [sec] 0.364456 usecs/op 2743815 ops/sec $ Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20190308181747.l36zqz2avtivrr3c@linux-r8p5 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-08 18:17:47 +00:00
{ "all", "Run all syscall benchmarks", NULL },
{ NULL, NULL, NULL },
};
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
static struct bench mem_benchmarks[] = {
{ "memcpy", "Benchmark for memcpy() functions", bench_mem_memcpy },
{ "memset", "Benchmark for memset() functions", bench_mem_memset },
perf bench: Add benchmark of find_next_bit for_each_set_bit, or similar functions like for_each_cpu, may be hot within the kernel. If many bits were set then one could imagine on Intel a "bt" instruction with every bit may be faster than the function call and word length find_next_bit logic. Add a benchmark to measure this. This benchmark on AMD rome and Intel skylakex shows "bt" is not a good option except for very small bitmaps. Committer testing: # perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks syscall: System call benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks internals: Perf-internals benchmarks all: All benchmarks # perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() functions memset: Benchmark for memset() functions find_bit: Benchmark for find_bit() functions all: Run all memory access benchmarks # perf bench mem find_bit # Running 'mem/find_bit' benchmark: 100000 operations 1 bits set of 1 bits Average for_each_set_bit took: 730.200 usec (+- 6.468 usec) Average test_bit loop took: 366.200 usec (+- 4.652 usec) 100000 operations 1 bits set of 2 bits Average for_each_set_bit took: 781.000 usec (+- 24.247 usec) Average test_bit loop took: 550.200 usec (+- 4.152 usec) 100000 operations 2 bits set of 2 bits Average for_each_set_bit took: 1113.400 usec (+- 112.340 usec) Average test_bit loop took: 1098.500 usec (+- 182.834 usec) 100000 operations 1 bits set of 4 bits Average for_each_set_bit took: 843.800 usec (+- 8.772 usec) Average test_bit loop took: 948.800 usec (+- 10.278 usec) 100000 operations 2 bits set of 4 bits Average for_each_set_bit took: 1185.800 usec (+- 114.345 usec) Average test_bit loop took: 1473.200 usec (+- 175.498 usec) 100000 operations 4 bits set of 4 bits Average for_each_set_bit took: 1769.667 usec (+- 233.177 usec) Average test_bit loop took: 1864.933 usec (+- 187.470 usec) 100000 operations 1 bits set of 8 bits Average for_each_set_bit took: 898.000 usec (+- 21.755 usec) Average test_bit loop took: 1768.400 usec (+- 23.672 usec) 100000 operations 2 bits set of 8 bits Average for_each_set_bit took: 1244.900 usec (+- 116.396 usec) Average test_bit loop took: 2201.800 usec (+- 145.398 usec) 100000 operations 4 bits set of 8 bits Average for_each_set_bit took: 1822.533 usec (+- 231.554 usec) Average test_bit loop took: 2569.467 usec (+- 168.453 usec) 100000 operations 8 bits set of 8 bits Average for_each_set_bit took: 2845.100 usec (+- 441.365 usec) Average test_bit loop took: 3023.300 usec (+- 219.575 usec) 100000 operations 1 bits set of 16 bits Average for_each_set_bit took: 923.400 usec (+- 17.560 usec) Average test_bit loop took: 3240.000 usec (+- 16.492 usec) 100000 operations 2 bits set of 16 bits Average for_each_set_bit took: 1264.300 usec (+- 114.034 usec) Average test_bit loop took: 3714.400 usec (+- 158.898 usec) 100000 operations 4 bits set of 16 bits Average for_each_set_bit took: 1817.867 usec (+- 222.199 usec) Average test_bit loop took: 4015.333 usec (+- 154.162 usec) 100000 operations 8 bits set of 16 bits Average for_each_set_bit took: 2826.350 usec (+- 433.457 usec) Average test_bit loop took: 4460.350 usec (+- 210.762 usec) 100000 operations 16 bits set of 16 bits Average for_each_set_bit took: 4615.600 usec (+- 809.350 usec) Average test_bit loop took: 5129.960 usec (+- 320.821 usec) 100000 operations 1 bits set of 32 bits Average for_each_set_bit took: 904.400 usec (+- 14.250 usec) Average test_bit loop took: 6194.000 usec (+- 29.254 usec) 100000 operations 2 bits set of 32 bits Average for_each_set_bit took: 1252.700 usec (+- 116.432 usec) Average test_bit loop took: 6652.400 usec (+- 154.352 usec) 100000 operations 4 bits set of 32 bits Average for_each_set_bit took: 1824.200 usec (+- 229.133 usec) Average test_bit loop took: 6961.733 usec (+- 154.682 usec) 100000 operations 8 bits set of 32 bits Average for_each_set_bit took: 2823.950 usec (+- 432.296 usec) Average test_bit loop took: 7351.900 usec (+- 193.626 usec) 100000 operations 16 bits set of 32 bits Average for_each_set_bit took: 4552.560 usec (+- 785.141 usec) Average test_bit loop took: 7998.360 usec (+- 305.629 usec) 100000 operations 32 bits set of 32 bits Average for_each_set_bit took: 7557.067 usec (+- 1407.702 usec) Average test_bit loop took: 9072.400 usec (+- 513.209 usec) 100000 operations 1 bits set of 64 bits Average for_each_set_bit took: 896.800 usec (+- 14.389 usec) Average test_bit loop took: 11927.200 usec (+- 68.862 usec) 100000 operations 2 bits set of 64 bits Average for_each_set_bit took: 1230.400 usec (+- 111.731 usec) Average test_bit loop took: 12478.600 usec (+- 189.382 usec) 100000 operations 4 bits set of 64 bits Average for_each_set_bit took: 1844.733 usec (+- 244.826 usec) Average test_bit loop took: 12911.467 usec (+- 206.246 usec) 100000 operations 8 bits set of 64 bits Average for_each_set_bit took: 2779.300 usec (+- 413.612 usec) Average test_bit loop took: 13372.650 usec (+- 239.623 usec) 100000 operations 16 bits set of 64 bits Average for_each_set_bit took: 4423.920 usec (+- 748.240 usec) Average test_bit loop took: 13995.800 usec (+- 318.427 usec) 100000 operations 32 bits set of 64 bits Average for_each_set_bit took: 7580.600 usec (+- 1462.407 usec) Average test_bit loop took: 15063.067 usec (+- 516.477 usec) 100000 operations 64 bits set of 64 bits Average for_each_set_bit took: 13391.514 usec (+- 2765.371 usec) Average test_bit loop took: 16974.914 usec (+- 916.936 usec) 100000 operations 1 bits set of 128 bits Average for_each_set_bit took: 1153.800 usec (+- 124.245 usec) Average test_bit loop took: 26959.000 usec (+- 714.047 usec) 100000 operations 2 bits set of 128 bits Average for_each_set_bit took: 1445.200 usec (+- 113.587 usec) Average test_bit loop took: 25798.800 usec (+- 512.908 usec) 100000 operations 4 bits set of 128 bits Average for_each_set_bit took: 1990.933 usec (+- 219.362 usec) Average test_bit loop took: 25589.400 usec (+- 348.288 usec) 100000 operations 8 bits set of 128 bits Average for_each_set_bit took: 2963.000 usec (+- 419.487 usec) Average test_bit loop took: 25690.050 usec (+- 262.025 usec) 100000 operations 16 bits set of 128 bits Average for_each_set_bit took: 4585.200 usec (+- 741.734 usec) Average test_bit loop took: 26125.040 usec (+- 274.127 usec) 100000 operations 32 bits set of 128 bits Average for_each_set_bit took: 7626.200 usec (+- 1404.950 usec) Average test_bit loop took: 27038.867 usec (+- 442.554 usec) 100000 operations 64 bits set of 128 bits Average for_each_set_bit took: 13343.371 usec (+- 2686.460 usec) Average test_bit loop took: 28936.543 usec (+- 883.257 usec) 100000 operations 128 bits set of 128 bits Average for_each_set_bit took: 23442.950 usec (+- 4880.541 usec) Average test_bit loop took: 32484.125 usec (+- 1691.931 usec) 100000 operations 1 bits set of 256 bits Average for_each_set_bit took: 1183.000 usec (+- 32.073 usec) Average test_bit loop took: 50114.600 usec (+- 198.880 usec) 100000 operations 2 bits set of 256 bits Average for_each_set_bit took: 1550.000 usec (+- 124.550 usec) Average test_bit loop took: 50334.200 usec (+- 128.425 usec) 100000 operations 4 bits set of 256 bits Average for_each_set_bit took: 2164.333 usec (+- 246.359 usec) Average test_bit loop took: 49959.867 usec (+- 188.035 usec) 100000 operations 8 bits set of 256 bits Average for_each_set_bit took: 3211.200 usec (+- 454.829 usec) Average test_bit loop took: 50140.850 usec (+- 176.046 usec) 100000 operations 16 bits set of 256 bits Average for_each_set_bit took: 5181.640 usec (+- 882.726 usec) Average test_bit loop took: 51003.160 usec (+- 419.601 usec) 100000 operations 32 bits set of 256 bits Average for_each_set_bit took: 8369.333 usec (+- 1513.150 usec) Average test_bit loop took: 52096.700 usec (+- 573.022 usec) 100000 operations 64 bits set of 256 bits Average for_each_set_bit took: 13866.857 usec (+- 2649.393 usec) Average test_bit loop took: 53989.600 usec (+- 938.808 usec) 100000 operations 128 bits set of 256 bits Average for_each_set_bit took: 23588.350 usec (+- 4724.222 usec) Average test_bit loop took: 57300.625 usec (+- 1625.962 usec) 100000 operations 256 bits set of 256 bits Average for_each_set_bit took: 42752.200 usec (+- 9202.084 usec) Average test_bit loop took: 64426.933 usec (+- 3402.326 usec) 100000 operations 1 bits set of 512 bits Average for_each_set_bit took: 1632.000 usec (+- 229.954 usec) Average test_bit loop took: 98090.000 usec (+- 1120.435 usec) 100000 operations 2 bits set of 512 bits Average for_each_set_bit took: 1937.700 usec (+- 148.902 usec) Average test_bit loop took: 100364.100 usec (+- 1433.219 usec) 100000 operations 4 bits set of 512 bits Average for_each_set_bit took: 2528.000 usec (+- 243.654 usec) Average test_bit loop took: 99932.067 usec (+- 955.868 usec) 100000 operations 8 bits set of 512 bits Average for_each_set_bit took: 3734.100 usec (+- 512.359 usec) Average test_bit loop took: 98944.750 usec (+- 812.070 usec) 100000 operations 16 bits set of 512 bits Average for_each_set_bit took: 5551.400 usec (+- 846.605 usec) Average test_bit loop took: 98691.600 usec (+- 654.753 usec) 100000 operations 32 bits set of 512 bits Average for_each_set_bit took: 8594.500 usec (+- 1446.072 usec) Average test_bit loop took: 99176.867 usec (+- 579.990 usec) 100000 operations 64 bits set of 512 bits Average for_each_set_bit took: 13840.743 usec (+- 2527.055 usec) Average test_bit loop took: 100758.743 usec (+- 833.865 usec) 100000 operations 128 bits set of 512 bits Average for_each_set_bit took: 23185.925 usec (+- 4532.910 usec) Average test_bit loop took: 103786.700 usec (+- 1475.276 usec) 100000 operations 256 bits set of 512 bits Average for_each_set_bit took: 40322.400 usec (+- 8341.802 usec) Average test_bit loop took: 109433.378 usec (+- 2742.615 usec) 100000 operations 512 bits set of 512 bits Average for_each_set_bit took: 71804.540 usec (+- 15436.546 usec) Average test_bit loop took: 120255.440 usec (+- 5252.777 usec) 100000 operations 1 bits set of 1024 bits Average for_each_set_bit took: 1859.600 usec (+- 27.969 usec) Average test_bit loop took: 187676.000 usec (+- 1337.770 usec) 100000 operations 2 bits set of 1024 bits Average for_each_set_bit took: 2273.600 usec (+- 139.420 usec) Average test_bit loop took: 188176.000 usec (+- 684.357 usec) 100000 operations 4 bits set of 1024 bits Average for_each_set_bit took: 2940.400 usec (+- 268.213 usec) Average test_bit loop took: 189172.600 usec (+- 593.295 usec) 100000 operations 8 bits set of 1024 bits Average for_each_set_bit took: 4224.200 usec (+- 547.933 usec) Average test_bit loop took: 190257.250 usec (+- 621.021 usec) 100000 operations 16 bits set of 1024 bits Average for_each_set_bit took: 6090.560 usec (+- 877.975 usec) Average test_bit loop took: 190143.880 usec (+- 503.753 usec) 100000 operations 32 bits set of 1024 bits Average for_each_set_bit took: 9178.800 usec (+- 1475.136 usec) Average test_bit loop took: 190757.100 usec (+- 494.757 usec) 100000 operations 64 bits set of 1024 bits Average for_each_set_bit took: 14441.457 usec (+- 2545.497 usec) Average test_bit loop took: 192299.486 usec (+- 795.251 usec) 100000 operations 128 bits set of 1024 bits Average for_each_set_bit took: 23623.825 usec (+- 4481.182 usec) Average test_bit loop took: 194885.550 usec (+- 1300.817 usec) 100000 operations 256 bits set of 1024 bits Average for_each_set_bit took: 40194.956 usec (+- 8109.056 usec) Average test_bit loop took: 200259.311 usec (+- 2566.085 usec) 100000 operations 512 bits set of 1024 bits Average for_each_set_bit took: 70983.560 usec (+- 15074.982 usec) Average test_bit loop took: 210527.460 usec (+- 4968.980 usec) 100000 operations 1024 bits set of 1024 bits Average for_each_set_bit took: 136530.345 usec (+- 31584.400 usec) Average test_bit loop took: 233329.691 usec (+- 10814.036 usec) 100000 operations 1 bits set of 2048 bits Average for_each_set_bit took: 3077.600 usec (+- 76.376 usec) Average test_bit loop took: 402154.400 usec (+- 518.571 usec) 100000 operations 2 bits set of 2048 bits Average for_each_set_bit took: 3508.600 usec (+- 148.350 usec) Average test_bit loop took: 403814.500 usec (+- 1133.027 usec) 100000 operations 4 bits set of 2048 bits Average for_each_set_bit took: 4219.333 usec (+- 285.844 usec) Average test_bit loop took: 404312.533 usec (+- 985.751 usec) 100000 operations 8 bits set of 2048 bits Average for_each_set_bit took: 5670.550 usec (+- 615.238 usec) Average test_bit loop took: 405321.800 usec (+- 1038.487 usec) 100000 operations 16 bits set of 2048 bits Average for_each_set_bit took: 7785.080 usec (+- 992.522 usec) Average test_bit loop took: 406746.160 usec (+- 1015.478 usec) 100000 operations 32 bits set of 2048 bits Average for_each_set_bit took: 11163.800 usec (+- 1627.320 usec) Average test_bit loop took: 406124.267 usec (+- 898.785 usec) 100000 operations 64 bits set of 2048 bits Average for_each_set_bit took: 16964.629 usec (+- 2806.130 usec) Average test_bit loop took: 406618.514 usec (+- 798.356 usec) 100000 operations 128 bits set of 2048 bits Average for_each_set_bit took: 27219.625 usec (+- 4988.458 usec) Average test_bit loop took: 410149.325 usec (+- 1705.641 usec) 100000 operations 256 bits set of 2048 bits Average for_each_set_bit took: 45138.578 usec (+- 8831.021 usec) Average test_bit loop took: 415462.467 usec (+- 2725.418 usec) 100000 operations 512 bits set of 2048 bits Average for_each_set_bit took: 77450.540 usec (+- 15962.238 usec) Average test_bit loop took: 426089.180 usec (+- 5171.788 usec) 100000 operations 1024 bits set of 2048 bits Average for_each_set_bit took: 138023.636 usec (+- 29826.959 usec) Average test_bit loop took: 446346.636 usec (+- 9904.417 usec) 100000 operations 2048 bits set of 2048 bits Average for_each_set_bit took: 251072.600 usec (+- 55947.692 usec) Average test_bit loop took: 484855.983 usec (+- 18970.431 usec) # Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20200729220034.1337168-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-29 22:00:34 +00:00
{ "find_bit", "Benchmark for find_bit() functions", bench_mem_find_bit },
{ "all", "Run all memory access benchmarks", NULL },
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
{ NULL, NULL, NULL }
};
static struct bench futex_benchmarks[] = {
{ "hash", "Benchmark for futex hash table", bench_futex_hash },
{ "wake", "Benchmark for futex wake calls", bench_futex_wake },
{ "wake-parallel", "Benchmark for parallel futex wake calls", bench_futex_wake_parallel },
{ "requeue", "Benchmark for futex requeue calls", bench_futex_requeue },
/* pi-futexes */
{ "lock-pi", "Benchmark for futex lock_pi calls", bench_futex_lock_pi },
{ "all", "Run all futex benchmarks", NULL },
{ NULL, NULL, NULL }
};
#ifdef HAVE_EVENTFD_SUPPORT
perf bench: Add epoll parallel epoll_wait benchmark This program benchmarks concurrent epoll_wait(2) for file descriptors that are monitored with with EPOLLIN along various semantics, by a single epoll instance. Such conditions can be found when using single/combined or multiple queuing when load balancing. Each thread has a number of private, nonblocking file descriptors, referred to as fdmap. A writer thread will constantly be writing to the fdmaps of all threads, minimizing each threads's chances of epoll_wait not finding any ready read events and blocking as this is not what we want to stress. Full details in the start of the C file. Committer testing: # perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks all: All benchmarks # perf bench epoll # List of available benchmarks for collection 'epoll': wait: Benchmark epoll concurrent epoll_waits all: Run all futex benchmarks # perf bench epoll wait # Running 'epoll/wait' benchmark: Run summary [PID 19295]: 3 threads monitoring on 64 file-descriptors for 8 secs. [thread 0] fdmap: 0xdaa650 ... 0xdaa74c [ 328241 ops/sec ] [thread 1] fdmap: 0xdaa900 ... 0xdaa9fc [ 351695 ops/sec ] [thread 2] fdmap: 0xdaabb0 ... 0xdaacac [ 381423 ops/sec ] Averaged 353786 operations/sec (+- 4.35%), total secs = 8 # Committer notes: Fix the build on debian:experimental-x-mips, debian:experimental-x-mipsel and others: CC /tmp/build/perf/bench/epoll-wait.o bench/epoll-wait.c: In function 'writerfn': bench/epoll-wait.c:399:12: error: format '%ld' expects argument of type 'long int', but argument 2 has type 'size_t' {aka 'unsigned int'} [-Werror=format=] printinfo("exiting writer-thread (total full-loops: %ld)\n", iter); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~ bench/epoll-wait.c:86:31: note: in definition of macro 'printinfo' do { if (__verbose) { printf(fmt, ## arg); fflush(stdout); } } while (0) ^~~ cc1: all warnings being treated as errors Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> <jbaron@akamai.com> Link: http://lkml.kernel.org/r/20181106152226.20883-2-dave@stgolabs.net Link: http://lkml.kernel.org/r/20181106182349.thdkpvshkna5vd7o@linux-r8p5> [ Applied above fixup as per Davidlohr's request ] [ Use inttypes.h to print rlim_t fields, fixing the build on Alpine Linux / musl libc ] [ Check if eventfd() is available, i.e. if HAVE_EVENTFD is defined ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-06 15:22:25 +00:00
static struct bench epoll_benchmarks[] = {
{ "wait", "Benchmark epoll concurrent epoll_waits", bench_epoll_wait },
perf bench: Add epoll_ctl(2) benchmark Benchmark the various operations allowed for epoll_ctl(2). The idea is to concurrently stress a single epoll instance doing add/mod/del operations. Committer testing: # perf bench epoll ctl # Running 'epoll/ctl' benchmark: Run summary [PID 20344]: 4 threads doing epoll_ctl ops 64 file-descriptors for 8 secs. [thread 0] fdmap: 0x21a46b0 ... 0x21a47ac [ add: 1680960 ops; mod: 1680960 ops; del: 1680960 ops ] [thread 1] fdmap: 0x21a4960 ... 0x21a4a5c [ add: 1685440 ops; mod: 1685440 ops; del: 1685440 ops ] [thread 2] fdmap: 0x21a4c10 ... 0x21a4d0c [ add: 1674368 ops; mod: 1674368 ops; del: 1674368 ops ] [thread 3] fdmap: 0x21a4ec0 ... 0x21a4fbc [ add: 1677568 ops; mod: 1677568 ops; del: 1677568 ops ] Averaged 1679584 ADD operations (+- 0.14%) Averaged 1679584 MOD operations (+- 0.14%) Averaged 1679584 DEL operations (+- 0.14%) # Lets measure those calls with 'perf trace' to get a glympse at what this benchmark is doing in terms of syscalls: # perf trace -m32768 -s perf bench epoll ctl # Running 'epoll/ctl' benchmark: Run summary [PID 20405]: 4 threads doing epoll_ctl ops 64 file-descriptors for 8 secs. [thread 0] fdmap: 0x21764e0 ... 0x21765dc [ add: 1100480 ops; mod: 1100480 ops; del: 1100480 ops ] [thread 1] fdmap: 0x2176790 ... 0x217688c [ add: 1250176 ops; mod: 1250176 ops; del: 1250176 ops ] [thread 2] fdmap: 0x2176a40 ... 0x2176b3c [ add: 1022464 ops; mod: 1022464 ops; del: 1022464 ops ] [thread 3] fdmap: 0x2176cf0 ... 0x2176dec [ add: 705472 ops; mod: 705472 ops; del: 705472 ops ] Averaged 1019648 ADD operations (+- 11.27%) Averaged 1019648 MOD operations (+- 11.27%) Averaged 1019648 DEL operations (+- 11.27%) Summary of events: epoll-ctl (20405), 1264 events, 0.0% syscall calls total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- --------- --------- --------- --------- ------ eventfd2 256 9.514 0.001 0.037 5.243 68.00% clone 4 1.245 0.204 0.311 0.531 24.13% mprotect 66 0.345 0.002 0.005 0.021 7.43% openat 45 0.313 0.004 0.007 0.073 21.93% mmap 88 0.302 0.002 0.003 0.013 5.02% futex 4 0.160 0.002 0.040 0.140 83.43% sched_setaffinity 4 0.124 0.005 0.031 0.070 49.39% read 44 0.103 0.001 0.002 0.013 15.54% fstat 40 0.052 0.001 0.001 0.003 5.43% close 39 0.039 0.001 0.001 0.001 1.48% stat 9 0.034 0.003 0.004 0.006 7.30% access 3 0.023 0.007 0.008 0.008 4.25% open 2 0.021 0.008 0.011 0.013 22.60% getdents 4 0.019 0.001 0.005 0.009 37.15% write 2 0.013 0.004 0.007 0.009 38.48% munmap 1 0.010 0.010 0.010 0.010 0.00% brk 3 0.006 0.001 0.002 0.003 26.34% rt_sigprocmask 2 0.004 0.001 0.002 0.003 43.95% rt_sigaction 3 0.004 0.001 0.001 0.002 16.07% prlimit64 3 0.004 0.001 0.001 0.001 5.39% prctl 1 0.003 0.003 0.003 0.003 0.00% epoll_create 1 0.003 0.003 0.003 0.003 0.00% lseek 2 0.002 0.001 0.001 0.001 11.42% sched_getaffinity 1 0.002 0.002 0.002 0.002 0.00% arch_prctl 1 0.002 0.002 0.002 0.002 0.00% set_tid_address 1 0.001 0.001 0.001 0.001 0.00% getpid 1 0.001 0.001 0.001 0.001 0.00% set_robust_list 1 0.001 0.001 0.001 0.001 0.00% execve 1 0.000 0.000 0.000 0.000 0.00% epoll-ctl (20406), 1245480 events, 14.6% syscall calls total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- --------- --------- --------- --------- ------ epoll_ctl 619511 1034.927 0.001 0.002 6.691 0.67% nanosleep 3226 616.114 0.006 0.191 10.376 7.57% futex 2 11.336 0.002 5.668 11.334 99.97% set_robust_list 1 0.001 0.001 0.001 0.001 0.00% clone 1 0.000 0.000 0.000 0.000 0.00% epoll-ctl (20407), 1243151 events, 14.5% syscall calls total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- --------- --------- --------- --------- ------ epoll_ctl 618350 1042.181 0.001 0.002 2.512 0.40% nanosleep 3220 366.261 0.012 0.114 18.162 9.59% futex 4 5.463 0.001 1.366 5.427 99.12% set_robust_list 1 0.002 0.002 0.002 0.002 0.00% epoll-ctl (20408), 1801690 events, 21.1% syscall calls total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- --------- --------- --------- --------- ------ epoll_ctl 896174 1540.581 0.001 0.002 6.987 0.74% nanosleep 4667 783.393 0.006 0.168 10.419 7.10% futex 2 4.682 0.002 2.341 4.681 99.93% set_robust_list 1 0.002 0.002 0.002 0.002 0.00% clone 1 0.000 0.000 0.000 0.000 0.00% epoll-ctl (20409), 4254890 events, 49.8% syscall calls total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- --------- --------- --------- --------- ------ epoll_ctl 2116416 3768.097 0.001 0.002 9.956 0.41% nanosleep 11023 1141.778 0.006 0.104 9.447 4.95% futex 3 0.037 0.002 0.012 0.029 70.50% set_robust_list 1 0.008 0.008 0.008 0.008 0.00% madvise 1 0.005 0.005 0.005 0.005 0.00% clone 1 0.000 0.000 0.000 0.000 0.00% # Committer notes: Fix build on fedora:24-x-ARC-uClibc, debian:experimental-x-mips, debian:experimental-x-mipsel, ubuntu:16.04-x-arm and ubuntu:16.04-x-powerpc CC /tmp/build/perf/bench/epoll-ctl.o bench/epoll-ctl.c: In function 'init_fdmaps': bench/epoll-ctl.c:214:16: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] for (i = 0; i < nfds; i+=inc) { ^ bench/epoll-ctl.c: In function 'bench_epoll_ctl': bench/epoll-ctl.c:377:16: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] for (i = 0; i < nthreads; i++) { ^ bench/epoll-ctl.c:388:16: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] for (i = 0; i < nthreads; i++) { ^ cc1: all warnings being treated as errors Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Link: http://lkml.kernel.org/r/20181106152226.20883-3-dave@stgolabs.net [ Use inttypes.h to print rlim_t fields, fixing the build on Alpine Linux / musl libc ] [ Check if eventfd() is available, i.e. if HAVE_EVENTFD is defined ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-06 15:22:26 +00:00
{ "ctl", "Benchmark epoll concurrent epoll_ctls", bench_epoll_ctl },
perf bench: Add epoll parallel epoll_wait benchmark This program benchmarks concurrent epoll_wait(2) for file descriptors that are monitored with with EPOLLIN along various semantics, by a single epoll instance. Such conditions can be found when using single/combined or multiple queuing when load balancing. Each thread has a number of private, nonblocking file descriptors, referred to as fdmap. A writer thread will constantly be writing to the fdmaps of all threads, minimizing each threads's chances of epoll_wait not finding any ready read events and blocking as this is not what we want to stress. Full details in the start of the C file. Committer testing: # perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks all: All benchmarks # perf bench epoll # List of available benchmarks for collection 'epoll': wait: Benchmark epoll concurrent epoll_waits all: Run all futex benchmarks # perf bench epoll wait # Running 'epoll/wait' benchmark: Run summary [PID 19295]: 3 threads monitoring on 64 file-descriptors for 8 secs. [thread 0] fdmap: 0xdaa650 ... 0xdaa74c [ 328241 ops/sec ] [thread 1] fdmap: 0xdaa900 ... 0xdaa9fc [ 351695 ops/sec ] [thread 2] fdmap: 0xdaabb0 ... 0xdaacac [ 381423 ops/sec ] Averaged 353786 operations/sec (+- 4.35%), total secs = 8 # Committer notes: Fix the build on debian:experimental-x-mips, debian:experimental-x-mipsel and others: CC /tmp/build/perf/bench/epoll-wait.o bench/epoll-wait.c: In function 'writerfn': bench/epoll-wait.c:399:12: error: format '%ld' expects argument of type 'long int', but argument 2 has type 'size_t' {aka 'unsigned int'} [-Werror=format=] printinfo("exiting writer-thread (total full-loops: %ld)\n", iter); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~ bench/epoll-wait.c:86:31: note: in definition of macro 'printinfo' do { if (__verbose) { printf(fmt, ## arg); fflush(stdout); } } while (0) ^~~ cc1: all warnings being treated as errors Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> <jbaron@akamai.com> Link: http://lkml.kernel.org/r/20181106152226.20883-2-dave@stgolabs.net Link: http://lkml.kernel.org/r/20181106182349.thdkpvshkna5vd7o@linux-r8p5> [ Applied above fixup as per Davidlohr's request ] [ Use inttypes.h to print rlim_t fields, fixing the build on Alpine Linux / musl libc ] [ Check if eventfd() is available, i.e. if HAVE_EVENTFD is defined ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-06 15:22:25 +00:00
{ "all", "Run all futex benchmarks", NULL },
{ NULL, NULL, NULL }
};
#endif // HAVE_EVENTFD_SUPPORT
perf bench: Add epoll parallel epoll_wait benchmark This program benchmarks concurrent epoll_wait(2) for file descriptors that are monitored with with EPOLLIN along various semantics, by a single epoll instance. Such conditions can be found when using single/combined or multiple queuing when load balancing. Each thread has a number of private, nonblocking file descriptors, referred to as fdmap. A writer thread will constantly be writing to the fdmaps of all threads, minimizing each threads's chances of epoll_wait not finding any ready read events and blocking as this is not what we want to stress. Full details in the start of the C file. Committer testing: # perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks all: All benchmarks # perf bench epoll # List of available benchmarks for collection 'epoll': wait: Benchmark epoll concurrent epoll_waits all: Run all futex benchmarks # perf bench epoll wait # Running 'epoll/wait' benchmark: Run summary [PID 19295]: 3 threads monitoring on 64 file-descriptors for 8 secs. [thread 0] fdmap: 0xdaa650 ... 0xdaa74c [ 328241 ops/sec ] [thread 1] fdmap: 0xdaa900 ... 0xdaa9fc [ 351695 ops/sec ] [thread 2] fdmap: 0xdaabb0 ... 0xdaacac [ 381423 ops/sec ] Averaged 353786 operations/sec (+- 4.35%), total secs = 8 # Committer notes: Fix the build on debian:experimental-x-mips, debian:experimental-x-mipsel and others: CC /tmp/build/perf/bench/epoll-wait.o bench/epoll-wait.c: In function 'writerfn': bench/epoll-wait.c:399:12: error: format '%ld' expects argument of type 'long int', but argument 2 has type 'size_t' {aka 'unsigned int'} [-Werror=format=] printinfo("exiting writer-thread (total full-loops: %ld)\n", iter); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~ bench/epoll-wait.c:86:31: note: in definition of macro 'printinfo' do { if (__verbose) { printf(fmt, ## arg); fflush(stdout); } } while (0) ^~~ cc1: all warnings being treated as errors Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> <jbaron@akamai.com> Link: http://lkml.kernel.org/r/20181106152226.20883-2-dave@stgolabs.net Link: http://lkml.kernel.org/r/20181106182349.thdkpvshkna5vd7o@linux-r8p5> [ Applied above fixup as per Davidlohr's request ] [ Use inttypes.h to print rlim_t fields, fixing the build on Alpine Linux / musl libc ] [ Check if eventfd() is available, i.e. if HAVE_EVENTFD is defined ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-06 15:22:25 +00:00
static struct bench internals_benchmarks[] = {
{ "synthesize", "Benchmark perf event synthesis", bench_synthesize },
perf bench: Add kallsyms parsing Add a benchmark for kallsyms parsing. Example output: Running 'internals/kallsyms-parse' benchmark: Average kallsyms__parse took: 103.971 ms (+- 0.121 ms) Committer testing: Test Machine: AMD Ryzen 5 3600X 6-Core Processor [root@five ~]# perf bench internals kallsyms-parse # Running 'internals/kallsyms-parse' benchmark: Average kallsyms__parse took: 79.692 ms (+- 0.101 ms) [root@five ~]# perf stat -r5 perf bench internals kallsyms-parse # Running 'internals/kallsyms-parse' benchmark: Average kallsyms__parse took: 80.563 ms (+- 0.079 ms) # Running 'internals/kallsyms-parse' benchmark: Average kallsyms__parse took: 81.046 ms (+- 0.155 ms) # Running 'internals/kallsyms-parse' benchmark: Average kallsyms__parse took: 80.874 ms (+- 0.104 ms) # Running 'internals/kallsyms-parse' benchmark: Average kallsyms__parse took: 81.173 ms (+- 0.133 ms) # Running 'internals/kallsyms-parse' benchmark: Average kallsyms__parse took: 81.169 ms (+- 0.074 ms) Performance counter stats for 'perf bench internals kallsyms-parse' (5 runs): 8,093.54 msec task-clock # 0.999 CPUs utilized ( +- 0.14% ) 3,165 context-switches # 0.391 K/sec ( +- 0.18% ) 10 cpu-migrations # 0.001 K/sec ( +- 23.13% ) 744 page-faults # 0.092 K/sec ( +- 0.21% ) 34,551,564,954 cycles # 4.269 GHz ( +- 0.05% ) (83.33%) 1,160,584,308 stalled-cycles-frontend # 3.36% frontend cycles idle ( +- 1.60% ) (83.33%) 14,974,323,985 stalled-cycles-backend # 43.34% backend cycles idle ( +- 0.24% ) (83.33%) 58,712,905,705 instructions # 1.70 insn per cycle # 0.26 stalled cycles per insn ( +- 0.01% ) (83.34%) 14,136,433,778 branches # 1746.632 M/sec ( +- 0.01% ) (83.33%) 141,943,217 branch-misses # 1.00% of all branches ( +- 0.04% ) (83.33%) 8.1040 +- 0.0115 seconds time elapsed ( +- 0.14% ) [root@five ~]# Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20200501221315.54715-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-01 22:13:13 +00:00
{ "kallsyms-parse", "Benchmark kallsyms parsing", bench_kallsyms_parse },
perf bench: Add build-id injection benchmark Sometimes I can see that 'perf record' piped with 'perf inject' take a long time processing build-ids. So introduce a inject-build-id benchmark to the internals benchmark suite to measure its overhead regularly. It runs the 'perf inject' command internally and feeds the given number of synthesized events (MMAP2 + SAMPLE basically). Usage: perf bench internals inject-build-id <options> -i, --iterations <n> Number of iterations used to compute average (default: 100) -m, --nr-mmaps <n> Number of mmap events for each iteration (default: 100) -n, --nr-samples <n> Number of sample events per mmap event (default: 100) -v, --verbose be more verbose (show iteration count, DSO name, etc) By default, it measures average processing time of 100 MMAP2 events and 10000 SAMPLE events. Below is a result on my laptop. $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 25.789 msec (+- 0.202 msec) Average time per event: 2.528 usec (+- 0.020 usec) Average memory usage: 8411 KB (+- 7 KB) Committer testing: $ perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks syscall: System call benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks internals: Perf-internals benchmarks all: All benchmarks $ perf bench internals # List of available benchmarks for collection 'internals': synthesize: Benchmark perf event synthesis kallsyms-parse: Benchmark kallsyms parsing inject-build-id: Benchmark build-id injection $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.202 msec (+- 0.059 msec) Average time per event: 1.392 usec (+- 0.006 usec) Average memory usage: 12650 KB (+- 10 KB) Average build-id-all injection took: 12.831 msec (+- 0.071 msec) Average time per event: 1.258 usec (+- 0.007 usec) Average memory usage: 11895 KB (+- 10 KB) $ $ perf stat -r5 perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.380 msec (+- 0.056 msec) Average time per event: 1.410 usec (+- 0.006 usec) Average memory usage: 12608 KB (+- 11 KB) Average build-id-all injection took: 11.889 msec (+- 0.064 msec) Average time per event: 1.166 usec (+- 0.006 usec) Average memory usage: 11838 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.246 msec (+- 0.065 msec) Average time per event: 1.397 usec (+- 0.006 usec) Average memory usage: 12744 KB (+- 10 KB) Average build-id-all injection took: 12.019 msec (+- 0.066 msec) Average time per event: 1.178 usec (+- 0.006 usec) Average memory usage: 11963 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.321 msec (+- 0.067 msec) Average time per event: 1.404 usec (+- 0.007 usec) Average memory usage: 12690 KB (+- 10 KB) Average build-id-all injection took: 11.909 msec (+- 0.041 msec) Average time per event: 1.168 usec (+- 0.004 usec) Average memory usage: 11938 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.287 msec (+- 0.059 msec) Average time per event: 1.401 usec (+- 0.006 usec) Average memory usage: 12864 KB (+- 10 KB) Average build-id-all injection took: 11.862 msec (+- 0.058 msec) Average time per event: 1.163 usec (+- 0.006 usec) Average memory usage: 12103 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.402 msec (+- 0.053 msec) Average time per event: 1.412 usec (+- 0.005 usec) Average memory usage: 12876 KB (+- 10 KB) Average build-id-all injection took: 11.826 msec (+- 0.061 msec) Average time per event: 1.159 usec (+- 0.006 usec) Average memory usage: 12111 KB (+- 10 KB) Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 4,267.48 msec task-clock:u # 1.502 CPUs utilized ( +- 0.14% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 102,092 page-faults:u # 0.024 M/sec ( +- 0.08% ) 3,894,589,578 cycles:u # 0.913 GHz ( +- 0.19% ) (83.49%) 140,078,421 stalled-cycles-frontend:u # 3.60% frontend cycles idle ( +- 0.77% ) (83.34%) 948,581,189 stalled-cycles-backend:u # 24.36% backend cycles idle ( +- 0.46% ) (83.25%) 5,835,587,719 instructions:u # 1.50 insn per cycle # 0.16 stalled cycles per insn ( +- 0.21% ) (83.24%) 1,267,423,636 branches:u # 296.996 M/sec ( +- 0.22% ) (83.12%) 17,484,290 branch-misses:u # 1.38% of all branches ( +- 0.12% ) (83.55%) 2.84176 +- 0.00222 seconds time elapsed ( +- 0.08% ) $ Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20201012070214.2074921-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-12 07:02:09 +00:00
{ "inject-build-id", "Benchmark build-id injection", bench_inject_build_id },
perf bench: Add benchmark for evlist open/close operations This new benchmark finds the total time that is taken to open, mmap, enable, disable, munmap, close an evlist (time taken for new, create_maps, config, delete is not counted in). The evlist can be configured as in perf-record using the -a,-C,-e,-u,--per-thread,-t,-p options. The events can be duplicated in the evlist to quickly test performance with many events using the -n options. Furthermore, also the number of iterations used to calculate the statistics is customizable. Examples: - Open one dummy event system-wide: $ sudo ./perf bench internals evlist-open-close Number of cpus: 4 Number of threads: 1 Number of events: 1 (4 fds) Number of iterations: 100 Average open-close took: 613.870 usec (+- 32.852 usec) - Open the group '{cs,cycles}' on CPU 0 $ sudo ./perf bench internals evlist-open-close -e '{cs,cycles}' -C 0 Number of cpus: 1 Number of threads: 1 Number of events: 2 (2 fds) Number of iterations: 100 Average open-close took: 8503.220 usec (+- 252.652 usec) - Open 10 'cycles' events for user 0, calculate average over 100 runs $ sudo ./perf bench internals evlist-open-close -e cycles -n 10 -u 0 -i 100 Number of cpus: 4 Number of threads: 328 Number of events: 10 (13120 fds) Number of iterations: 100 Average open-close took: 180043.140 usec (+- 2295.889 usec) Committer notes: Replaced a deprecated bzero() call with designated initialized zeroing. Added some missing evlist allocation checks, one noted by Riccardo on the mailing list. Minor cosmetic changes (sent in private). Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210809201101.277594-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-09 20:11:02 +00:00
{ "evlist-open-close", "Benchmark evlist open and close", bench_evlist_open_close },
{ "pmu-scan", "Benchmark sysfs PMU info scanning", bench_pmu_scan },
{ NULL, NULL, NULL }
};
perf bench: Add breakpoint benchmarks Add 2 benchmarks: 1. Performance of thread creation/exiting in presence of breakpoints. 2. Performance of breakpoint modification in presence of threads. The benchmarks capture use cases that we are interested in: using inheritable breakpoints in large highly-threaded applications. The benchmarks show significant slowdown imposed by breakpoints (even when they don't fire). Testing on Intel 8173M with 112 HW threads show: perf bench --repeat=56 breakpoint thread --breakpoints=0 --parallelism=56 --threads=20 78.675000 usecs/op perf bench --repeat=56 breakpoint thread --breakpoints=4 --parallelism=56 --threads=20 12967.135714 usecs/op That's 165x slowdown due to presence of the breakpoints. perf bench --repeat=20000 breakpoint enable --passive=0 --active=0 1.433250 usecs/op perf bench --repeat=20000 breakpoint enable --passive=224 --active=0 585.318400 usecs/op perf bench --repeat=20000 breakpoint enable --passive=0 --active=111 635.953000 usecs/op That's 408x and 444x slowdown due to presence of threads. Profiles show some overhead in toggle_bp_slot, but also very high contention: 90.83% breakpoint-thre [kernel.kallsyms] [k] osq_lock 4.69% breakpoint-thre [kernel.kallsyms] [k] mutex_spin_on_owner 2.06% breakpoint-thre [kernel.kallsyms] [k] __reserve_bp_slot 2.04% breakpoint-thre [kernel.kallsyms] [k] toggle_bp_slot 79.01% breakpoint-enab [kernel.kallsyms] [k] smp_call_function_single 9.94% breakpoint-enab [kernel.kallsyms] [k] llist_add_batch 5.70% breakpoint-enab [kernel.kallsyms] [k] _raw_spin_lock_irq 1.84% breakpoint-enab [kernel.kallsyms] [k] event_function_call 1.12% breakpoint-enab [kernel.kallsyms] [k] send_call_function_single_ipi 0.37% breakpoint-enab [kernel.kallsyms] [k] generic_exec_single 0.24% breakpoint-enab [kernel.kallsyms] [k] __perf_event_disable 0.20% breakpoint-enab [kernel.kallsyms] [k] _perf_event_enable 0.18% breakpoint-enab [kernel.kallsyms] [k] toggle_bp_slot Committer notes: Fixup struct init for older compilers: 3 32.90 alpine:3.5 : FAIL clang version 3.8.1 (tags/RELEASE_381/final) bench/breakpoint.c:49:34: error: missing field 'size' initializer [-Werror,-Wmissing-field-initializers] struct perf_event_attr attr = {0}; ^ 1 error generated. 7 37.31 alpine:3.9 : FAIL gcc version 8.3.0 (Alpine 8.3.0) bench/breakpoint.c:49:34: error: missing field 'size' initializer [-Werror,-Wmissing-field-initializers] struct perf_event_attr attr = {0}; ^ 1 error generated. Signed-off-by: Dmitriy Vyukov <dvyukov@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220505155745.1690906-1-dvyukov@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-05 15:57:45 +00:00
static struct bench breakpoint_benchmarks[] = {
{ "thread", "Benchmark thread start/finish with breakpoints", bench_breakpoint_thread},
{ "enable", "Benchmark breakpoint enable/disable", bench_breakpoint_enable},
{ "all", "Run all breakpoint benchmarks", NULL},
{ NULL, NULL, NULL },
};
static struct bench uprobe_benchmarks[] = {
{ "baseline", "Baseline libc usleep(1000) call", bench_uprobe_baseline, },
{ "empty", "Attach empty BPF prog to uprobe on usleep, system wide", bench_uprobe_empty, },
{ "trace_printk", "Attach trace_printk BPF prog to uprobe on usleep syswide", bench_uprobe_trace_printk, },
{ NULL, NULL, NULL },
};
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
struct collection {
const char *name;
const char *summary;
struct bench *benchmarks;
};
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
static struct collection collections[] = {
{ "sched", "Scheduler and IPC benchmarks", sched_benchmarks },
perf bench: Add basic syscall benchmark The usefulness of having a standard way of testing syscall performance has come up from time to time[0]. Furthermore, some of our testing machinery (such as 'mmtests') already makes use of a simplified version of the microbenchmark. This patch mainly takes the same idea to measure syscall throughput compatible with 'perf-bench' via getppid(2), yet without any of the additional template stuff from Ingo's version (based on numa.c). The code is identical to what mmtests uses. [0] https://lore.kernel.org/lkml/20160201074156.GA27156@gmail.com/ Committer notes: Add mising stdlib.h and unistd.h to get the prototypes for exit() and getppid(). Committer testing: $ perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks syscall: System call benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks internals: Perf-internals benchmarks all: All benchmarks $ $ perf bench syscall # List of available benchmarks for collection 'syscall': basic: Benchmark for basic getppid(2) calls all: Run all syscall benchmarks $ perf bench syscall basic # Running 'syscall/basic' benchmark: # Executed 10000000 getppid() calls Total time: 3.679 [sec] 0.367957 usecs/op 2717708 ops/sec $ perf bench syscall all # Running syscall/basic benchmark... # Executed 10000000 getppid() calls Total time: 3.644 [sec] 0.364456 usecs/op 2743815 ops/sec $ Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20190308181747.l36zqz2avtivrr3c@linux-r8p5 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-08 18:17:47 +00:00
{ "syscall", "System call benchmarks", syscall_benchmarks },
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
{ "mem", "Memory access benchmarks", mem_benchmarks },
#ifdef HAVE_LIBNUMA_SUPPORT
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
{ "numa", "NUMA scheduling and MM benchmarks", numa_benchmarks },
#endif
{"futex", "Futex stressing benchmarks", futex_benchmarks },
#ifdef HAVE_EVENTFD_SUPPORT
perf bench: Add epoll parallel epoll_wait benchmark This program benchmarks concurrent epoll_wait(2) for file descriptors that are monitored with with EPOLLIN along various semantics, by a single epoll instance. Such conditions can be found when using single/combined or multiple queuing when load balancing. Each thread has a number of private, nonblocking file descriptors, referred to as fdmap. A writer thread will constantly be writing to the fdmaps of all threads, minimizing each threads's chances of epoll_wait not finding any ready read events and blocking as this is not what we want to stress. Full details in the start of the C file. Committer testing: # perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks all: All benchmarks # perf bench epoll # List of available benchmarks for collection 'epoll': wait: Benchmark epoll concurrent epoll_waits all: Run all futex benchmarks # perf bench epoll wait # Running 'epoll/wait' benchmark: Run summary [PID 19295]: 3 threads monitoring on 64 file-descriptors for 8 secs. [thread 0] fdmap: 0xdaa650 ... 0xdaa74c [ 328241 ops/sec ] [thread 1] fdmap: 0xdaa900 ... 0xdaa9fc [ 351695 ops/sec ] [thread 2] fdmap: 0xdaabb0 ... 0xdaacac [ 381423 ops/sec ] Averaged 353786 operations/sec (+- 4.35%), total secs = 8 # Committer notes: Fix the build on debian:experimental-x-mips, debian:experimental-x-mipsel and others: CC /tmp/build/perf/bench/epoll-wait.o bench/epoll-wait.c: In function 'writerfn': bench/epoll-wait.c:399:12: error: format '%ld' expects argument of type 'long int', but argument 2 has type 'size_t' {aka 'unsigned int'} [-Werror=format=] printinfo("exiting writer-thread (total full-loops: %ld)\n", iter); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~ bench/epoll-wait.c:86:31: note: in definition of macro 'printinfo' do { if (__verbose) { printf(fmt, ## arg); fflush(stdout); } } while (0) ^~~ cc1: all warnings being treated as errors Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> <jbaron@akamai.com> Link: http://lkml.kernel.org/r/20181106152226.20883-2-dave@stgolabs.net Link: http://lkml.kernel.org/r/20181106182349.thdkpvshkna5vd7o@linux-r8p5> [ Applied above fixup as per Davidlohr's request ] [ Use inttypes.h to print rlim_t fields, fixing the build on Alpine Linux / musl libc ] [ Check if eventfd() is available, i.e. if HAVE_EVENTFD is defined ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-06 15:22:25 +00:00
{"epoll", "Epoll stressing benchmarks", epoll_benchmarks },
#endif
{ "internals", "Perf-internals benchmarks", internals_benchmarks },
perf bench: Add breakpoint benchmarks Add 2 benchmarks: 1. Performance of thread creation/exiting in presence of breakpoints. 2. Performance of breakpoint modification in presence of threads. The benchmarks capture use cases that we are interested in: using inheritable breakpoints in large highly-threaded applications. The benchmarks show significant slowdown imposed by breakpoints (even when they don't fire). Testing on Intel 8173M with 112 HW threads show: perf bench --repeat=56 breakpoint thread --breakpoints=0 --parallelism=56 --threads=20 78.675000 usecs/op perf bench --repeat=56 breakpoint thread --breakpoints=4 --parallelism=56 --threads=20 12967.135714 usecs/op That's 165x slowdown due to presence of the breakpoints. perf bench --repeat=20000 breakpoint enable --passive=0 --active=0 1.433250 usecs/op perf bench --repeat=20000 breakpoint enable --passive=224 --active=0 585.318400 usecs/op perf bench --repeat=20000 breakpoint enable --passive=0 --active=111 635.953000 usecs/op That's 408x and 444x slowdown due to presence of threads. Profiles show some overhead in toggle_bp_slot, but also very high contention: 90.83% breakpoint-thre [kernel.kallsyms] [k] osq_lock 4.69% breakpoint-thre [kernel.kallsyms] [k] mutex_spin_on_owner 2.06% breakpoint-thre [kernel.kallsyms] [k] __reserve_bp_slot 2.04% breakpoint-thre [kernel.kallsyms] [k] toggle_bp_slot 79.01% breakpoint-enab [kernel.kallsyms] [k] smp_call_function_single 9.94% breakpoint-enab [kernel.kallsyms] [k] llist_add_batch 5.70% breakpoint-enab [kernel.kallsyms] [k] _raw_spin_lock_irq 1.84% breakpoint-enab [kernel.kallsyms] [k] event_function_call 1.12% breakpoint-enab [kernel.kallsyms] [k] send_call_function_single_ipi 0.37% breakpoint-enab [kernel.kallsyms] [k] generic_exec_single 0.24% breakpoint-enab [kernel.kallsyms] [k] __perf_event_disable 0.20% breakpoint-enab [kernel.kallsyms] [k] _perf_event_enable 0.18% breakpoint-enab [kernel.kallsyms] [k] toggle_bp_slot Committer notes: Fixup struct init for older compilers: 3 32.90 alpine:3.5 : FAIL clang version 3.8.1 (tags/RELEASE_381/final) bench/breakpoint.c:49:34: error: missing field 'size' initializer [-Werror,-Wmissing-field-initializers] struct perf_event_attr attr = {0}; ^ 1 error generated. 7 37.31 alpine:3.9 : FAIL gcc version 8.3.0 (Alpine 8.3.0) bench/breakpoint.c:49:34: error: missing field 'size' initializer [-Werror,-Wmissing-field-initializers] struct perf_event_attr attr = {0}; ^ 1 error generated. Signed-off-by: Dmitriy Vyukov <dvyukov@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220505155745.1690906-1-dvyukov@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-05 15:57:45 +00:00
{ "breakpoint", "Breakpoint benchmarks", breakpoint_benchmarks },
{ "uprobe", "uprobe benchmarks", uprobe_benchmarks },
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
{ "all", "All benchmarks", NULL },
{ NULL, NULL, NULL }
};
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
/* Iterate over all benchmark collections: */
#define for_each_collection(coll) \
for (coll = collections; coll->name; coll++)
/* Iterate over all benchmarks within a collection: */
#define for_each_bench(coll, bench) \
for (bench = coll->benchmarks; bench && bench->name; bench++)
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
static void dump_benchmarks(struct collection *coll)
{
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
struct bench *bench;
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
printf("\n # List of available benchmarks for collection '%s':\n\n", coll->name);
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
for_each_bench(coll, bench)
printf("%14s: %s\n", bench->name, bench->summary);
printf("\n");
}
static const char *bench_format_str;
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
/* Output/formatting style, exported to benchmark modules: */
int bench_format = BENCH_FORMAT_DEFAULT;
unsigned int bench_repeat = 10; /* default number of times to repeat the run */
static const struct option bench_options[] = {
OPT_STRING('f', "format", &bench_format_str, "default|simple", "Specify the output formatting style"),
OPT_UINTEGER('r', "repeat", &bench_repeat, "Specify number of times to repeat the run"),
OPT_END()
};
static const char * const bench_usage[] = {
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
"perf bench [<common options>] <collection> <benchmark> [<options>]",
NULL
};
static void print_usage(void)
{
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
struct collection *coll;
int i;
printf("Usage: \n");
for (i = 0; bench_usage[i]; i++)
printf("\t%s\n", bench_usage[i]);
printf("\n");
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
printf(" # List of all available benchmark collections:\n\n");
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
for_each_collection(coll)
printf("%14s: %s\n", coll->name, coll->summary);
printf("\n");
}
static int bench_str2int(const char *str)
{
if (!str)
return BENCH_FORMAT_DEFAULT;
if (!strcmp(str, BENCH_FORMAT_DEFAULT_STR))
return BENCH_FORMAT_DEFAULT;
else if (!strcmp(str, BENCH_FORMAT_SIMPLE_STR))
return BENCH_FORMAT_SIMPLE;
return BENCH_FORMAT_UNKNOWN;
}
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
/*
* Run a specific benchmark but first rename the running task's ->comm[]
* to something meaningful:
*/
static int run_bench(const char *coll_name, const char *bench_name, bench_fn_t fn,
int argc, const char **argv)
perf bench: Add "all" pseudo subsystem and "all" pseudo suite This patch adds a new "all" pseudo subsystem and an "all" pseudo suite. These are for testing all subsystem and its all suite, or all suite of one subsystem. (This patch also contains a few trivial comment fixes for bench/* and output style fixes. I judged that there are no necessity to make them into individual patch.) Example of use: | % ./perf bench sched all # Test all suites of sched subsystem | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.414 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 10.999 [sec] | | 10.999317 usecs/op | 90914 ops/sec | | % ./perf bench all # Test all suites of all subsystems | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.420 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 11.741 [sec] | | 11.741346 usecs/op | 85169 ops/sec | | # Running mem/memcpy benchmark... | # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ... | | 808.407437 MB/Sec Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-13 08:01:59 +00:00
{
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
int size;
char *name;
int ret;
size = strlen(coll_name) + 1 + strlen(bench_name) + 1;
name = zalloc(size);
BUG_ON(!name);
scnprintf(name, size, "%s-%s", coll_name, bench_name);
prctl(PR_SET_NAME, name);
argv[0] = name;
ret = fn(argc, argv);
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
free(name);
return ret;
}
static void run_collection(struct collection *coll)
{
struct bench *bench;
perf bench: Add "all" pseudo subsystem and "all" pseudo suite This patch adds a new "all" pseudo subsystem and an "all" pseudo suite. These are for testing all subsystem and its all suite, or all suite of one subsystem. (This patch also contains a few trivial comment fixes for bench/* and output style fixes. I judged that there are no necessity to make them into individual patch.) Example of use: | % ./perf bench sched all # Test all suites of sched subsystem | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.414 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 10.999 [sec] | | 10.999317 usecs/op | 90914 ops/sec | | % ./perf bench all # Test all suites of all subsystems | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.420 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 11.741 [sec] | | 11.741346 usecs/op | 85169 ops/sec | | # Running mem/memcpy benchmark... | # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ... | | 808.407437 MB/Sec Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-13 08:01:59 +00:00
const char *argv[2];
argv[1] = NULL;
/*
* TODO:
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
*
* Preparing preset parameters for
perf bench: Add "all" pseudo subsystem and "all" pseudo suite This patch adds a new "all" pseudo subsystem and an "all" pseudo suite. These are for testing all subsystem and its all suite, or all suite of one subsystem. (This patch also contains a few trivial comment fixes for bench/* and output style fixes. I judged that there are no necessity to make them into individual patch.) Example of use: | % ./perf bench sched all # Test all suites of sched subsystem | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.414 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 10.999 [sec] | | 10.999317 usecs/op | 90914 ops/sec | | % ./perf bench all # Test all suites of all subsystems | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.420 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 11.741 [sec] | | 11.741346 usecs/op | 85169 ops/sec | | # Running mem/memcpy benchmark... | # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ... | | 808.407437 MB/Sec Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-13 08:01:59 +00:00
* embedded, ordinary PC, HPC, etc...
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
* would be helpful.
perf bench: Add "all" pseudo subsystem and "all" pseudo suite This patch adds a new "all" pseudo subsystem and an "all" pseudo suite. These are for testing all subsystem and its all suite, or all suite of one subsystem. (This patch also contains a few trivial comment fixes for bench/* and output style fixes. I judged that there are no necessity to make them into individual patch.) Example of use: | % ./perf bench sched all # Test all suites of sched subsystem | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.414 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 10.999 [sec] | | 10.999317 usecs/op | 90914 ops/sec | | % ./perf bench all # Test all suites of all subsystems | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.420 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 11.741 [sec] | | 11.741346 usecs/op | 85169 ops/sec | | # Running mem/memcpy benchmark... | # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ... | | 808.407437 MB/Sec Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-13 08:01:59 +00:00
*/
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
for_each_bench(coll, bench) {
if (!bench->fn)
break;
printf("# Running %s/%s benchmark...\n", coll->name, bench->name);
perf bench: Add "all" pseudo subsystem and "all" pseudo suite This patch adds a new "all" pseudo subsystem and an "all" pseudo suite. These are for testing all subsystem and its all suite, or all suite of one subsystem. (This patch also contains a few trivial comment fixes for bench/* and output style fixes. I judged that there are no necessity to make them into individual patch.) Example of use: | % ./perf bench sched all # Test all suites of sched subsystem | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.414 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 10.999 [sec] | | 10.999317 usecs/op | 90914 ops/sec | | % ./perf bench all # Test all suites of all subsystems | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.420 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 11.741 [sec] | | 11.741346 usecs/op | 85169 ops/sec | | # Running mem/memcpy benchmark... | # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ... | | 808.407437 MB/Sec Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-13 08:01:59 +00:00
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
argv[1] = bench->name;
run_bench(coll->name, bench->name, bench->fn, 1, argv);
perf bench: Add "all" pseudo subsystem and "all" pseudo suite This patch adds a new "all" pseudo subsystem and an "all" pseudo suite. These are for testing all subsystem and its all suite, or all suite of one subsystem. (This patch also contains a few trivial comment fixes for bench/* and output style fixes. I judged that there are no necessity to make them into individual patch.) Example of use: | % ./perf bench sched all # Test all suites of sched subsystem | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.414 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 10.999 [sec] | | 10.999317 usecs/op | 90914 ops/sec | | % ./perf bench all # Test all suites of all subsystems | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.420 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 11.741 [sec] | | 11.741346 usecs/op | 85169 ops/sec | | # Running mem/memcpy benchmark... | # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ... | | 808.407437 MB/Sec Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-13 08:01:59 +00:00
printf("\n");
}
}
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
static void run_all_collections(void)
perf bench: Add "all" pseudo subsystem and "all" pseudo suite This patch adds a new "all" pseudo subsystem and an "all" pseudo suite. These are for testing all subsystem and its all suite, or all suite of one subsystem. (This patch also contains a few trivial comment fixes for bench/* and output style fixes. I judged that there are no necessity to make them into individual patch.) Example of use: | % ./perf bench sched all # Test all suites of sched subsystem | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.414 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 10.999 [sec] | | 10.999317 usecs/op | 90914 ops/sec | | % ./perf bench all # Test all suites of all subsystems | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.420 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 11.741 [sec] | | 11.741346 usecs/op | 85169 ops/sec | | # Running mem/memcpy benchmark... | # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ... | | 808.407437 MB/Sec Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-13 08:01:59 +00:00
{
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
struct collection *coll;
for_each_collection(coll)
run_collection(coll);
perf bench: Add "all" pseudo subsystem and "all" pseudo suite This patch adds a new "all" pseudo subsystem and an "all" pseudo suite. These are for testing all subsystem and its all suite, or all suite of one subsystem. (This patch also contains a few trivial comment fixes for bench/* and output style fixes. I judged that there are no necessity to make them into individual patch.) Example of use: | % ./perf bench sched all # Test all suites of sched subsystem | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.414 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 10.999 [sec] | | 10.999317 usecs/op | 90914 ops/sec | | % ./perf bench all # Test all suites of all subsystems | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.420 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 11.741 [sec] | | 11.741346 usecs/op | 85169 ops/sec | | # Running mem/memcpy benchmark... | # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ... | | 808.407437 MB/Sec Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-13 08:01:59 +00:00
}
int cmd_bench(int argc, const char **argv)
{
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
struct collection *coll;
int ret = 0;
/* Unbuffered output */
setvbuf(stdout, NULL, _IONBF, 0);
setlocale(LC_ALL, "");
if (argc < 2) {
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
/* No collection specified. */
print_usage();
goto end;
}
argc = parse_options(argc, argv, bench_options, bench_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
bench_format = bench_str2int(bench_format_str);
if (bench_format == BENCH_FORMAT_UNKNOWN) {
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
printf("Unknown format descriptor: '%s'\n", bench_format_str);
goto end;
}
if (bench_repeat == 0) {
printf("Invalid repeat option: Must specify a positive value\n");
goto end;
}
if (argc < 1) {
print_usage();
goto end;
}
perf bench: Add "all" pseudo subsystem and "all" pseudo suite This patch adds a new "all" pseudo subsystem and an "all" pseudo suite. These are for testing all subsystem and its all suite, or all suite of one subsystem. (This patch also contains a few trivial comment fixes for bench/* and output style fixes. I judged that there are no necessity to make them into individual patch.) Example of use: | % ./perf bench sched all # Test all suites of sched subsystem | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.414 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 10.999 [sec] | | 10.999317 usecs/op | 90914 ops/sec | | % ./perf bench all # Test all suites of all subsystems | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.420 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 11.741 [sec] | | 11.741346 usecs/op | 85169 ops/sec | | # Running mem/memcpy benchmark... | # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ... | | 808.407437 MB/Sec Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-13 08:01:59 +00:00
if (!strcmp(argv[0], "all")) {
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
run_all_collections();
perf bench: Add "all" pseudo subsystem and "all" pseudo suite This patch adds a new "all" pseudo subsystem and an "all" pseudo suite. These are for testing all subsystem and its all suite, or all suite of one subsystem. (This patch also contains a few trivial comment fixes for bench/* and output style fixes. I judged that there are no necessity to make them into individual patch.) Example of use: | % ./perf bench sched all # Test all suites of sched subsystem | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.414 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 10.999 [sec] | | 10.999317 usecs/op | 90914 ops/sec | | % ./perf bench all # Test all suites of all subsystems | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.420 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 11.741 [sec] | | 11.741346 usecs/op | 85169 ops/sec | | # Running mem/memcpy benchmark... | # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ... | | 808.407437 MB/Sec Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-13 08:01:59 +00:00
goto end;
}
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
for_each_collection(coll) {
struct bench *bench;
if (strcmp(coll->name, argv[0]))
continue;
if (argc < 2) {
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
/* No bench specified. */
dump_benchmarks(coll);
goto end;
}
perf bench: Add "all" pseudo subsystem and "all" pseudo suite This patch adds a new "all" pseudo subsystem and an "all" pseudo suite. These are for testing all subsystem and its all suite, or all suite of one subsystem. (This patch also contains a few trivial comment fixes for bench/* and output style fixes. I judged that there are no necessity to make them into individual patch.) Example of use: | % ./perf bench sched all # Test all suites of sched subsystem | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.414 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 10.999 [sec] | | 10.999317 usecs/op | 90914 ops/sec | | % ./perf bench all # Test all suites of all subsystems | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.420 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 11.741 [sec] | | 11.741346 usecs/op | 85169 ops/sec | | # Running mem/memcpy benchmark... | # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ... | | 808.407437 MB/Sec Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-13 08:01:59 +00:00
if (!strcmp(argv[1], "all")) {
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
run_collection(coll);
perf bench: Add "all" pseudo subsystem and "all" pseudo suite This patch adds a new "all" pseudo subsystem and an "all" pseudo suite. These are for testing all subsystem and its all suite, or all suite of one subsystem. (This patch also contains a few trivial comment fixes for bench/* and output style fixes. I judged that there are no necessity to make them into individual patch.) Example of use: | % ./perf bench sched all # Test all suites of sched subsystem | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.414 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 10.999 [sec] | | 10.999317 usecs/op | 90914 ops/sec | | % ./perf bench all # Test all suites of all subsystems | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.420 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 11.741 [sec] | | 11.741346 usecs/op | 85169 ops/sec | | # Running mem/memcpy benchmark... | # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ... | | 808.407437 MB/Sec Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-13 08:01:59 +00:00
goto end;
}
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
for_each_bench(coll, bench) {
if (strcmp(bench->name, argv[1]))
continue;
if (bench_format == BENCH_FORMAT_DEFAULT)
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
printf("# Running '%s/%s' benchmark:\n", coll->name, bench->name);
ret = run_bench(coll->name, bench->name, bench->fn, argc-1, argv+1);
goto end;
}
if (!strcmp(argv[1], "-h") || !strcmp(argv[1], "--help")) {
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
dump_benchmarks(coll);
goto end;
}
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
printf("Unknown benchmark: '%s' for collection '%s'\n", argv[1], argv[0]);
ret = 1;
goto end;
}
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
printf("Unknown collection: '%s'\n", argv[0]);
ret = 1;
end:
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups Before this patch, looking at 'perf bench sched pipe' behavior over 'top' only told us that something related to perf is running: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf 19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf After the patch it's clearly visible what's going on: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe 19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe The benchmark-subsystem name is concatenated with the individual testcase name. Unfortunately 'perf top' does not show the reconfigured name, possibly because it caches ->comm[] values and does not recognize changes to them? Also clean up a few bits in builtin-bench.c while at it and reorganize the code and the output strings to be consistent. Use iterators to access the various arrays. Rename 'suites' concept to 'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The many repetitions of 'suite' made the code harder to read and understand. The new output is: comet:~/tip/tools/perf> ./perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks all: All benchmarks comet:~/tip/tools/perf> ./perf bench sched # List of available benchmarks for collection 'sched': messaging: Benchmark for scheduling and IPC pipe: Benchmark for pipe() between two processes all: Test all scheduler benchmarks comet:~/tip/tools/perf> ./perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() memset: Benchmark for memset() tests all: Test all memory benchmarks comet:~/tip/tools/perf> ./perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Test all NUMA benchmarks Individual benchmark modules were not touched. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-23 12:37:56 +00:00
return ret;
}