linux-stable/sound/pci/hda/patch_hdmi.c

3290 lines
91 KiB
C
Raw Normal View History

/*
*
* patch_hdmi.c - routines for HDMI/DisplayPort codecs
*
* Copyright(c) 2008-2010 Intel Corporation. All rights reserved.
* Copyright (c) 2006 ATI Technologies Inc.
* Copyright (c) 2008 NVIDIA Corp. All rights reserved.
* Copyright (c) 2008 Wei Ni <wni@nvidia.com>
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
* Copyright (c) 2013 Anssi Hannula <anssi.hannula@iki.fi>
*
* Authors:
* Wu Fengguang <wfg@linux.intel.com>
*
* Maintained by:
* Wu Fengguang <wfg@linux.intel.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <sound/core.h>
#include <sound/jack.h>
#include <sound/asoundef.h>
#include <sound/tlv.h>
#include "hda_codec.h"
#include "hda_local.h"
#include "hda_jack.h"
static bool static_hdmi_pcm;
module_param(static_hdmi_pcm, bool, 0644);
MODULE_PARM_DESC(static_hdmi_pcm, "Don't restrict PCM parameters per ELD info");
#define is_haswell(codec) ((codec)->vendor_id == 0x80862807)
#define is_valleyview(codec) ((codec)->vendor_id == 0x80862882)
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
struct hdmi_spec_per_cvt {
hda_nid_t cvt_nid;
int assigned;
unsigned int channels_min;
unsigned int channels_max;
u32 rates;
u64 formats;
unsigned int maxbps;
};
/* max. connections to a widget */
#define HDA_MAX_CONNECTIONS 32
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
struct hdmi_spec_per_pin {
hda_nid_t pin_nid;
int num_mux_nids;
hda_nid_t mux_nids[HDA_MAX_CONNECTIONS];
2013-10-04 23:25:40 +00:00
hda_nid_t cvt_nid;
struct hda_codec *codec;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
struct hdmi_eld sink_eld;
struct mutex lock;
struct delayed_work work;
struct snd_kcontrol *eld_ctl;
int repoll_count;
bool setup; /* the stream has been set up by prepare callback */
int channels; /* current number of channels */
bool non_pcm;
bool chmap_set; /* channel-map override by ALSA API? */
unsigned char chmap[8]; /* ALSA API channel-map */
char pcm_name[8]; /* filled in build_pcm callbacks */
#ifdef CONFIG_PROC_FS
struct snd_info_entry *proc_entry;
#endif
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
};
struct cea_channel_speaker_allocation;
/* operations used by generic code that can be overridden by patches */
struct hdmi_ops {
int (*pin_get_eld)(struct hda_codec *codec, hda_nid_t pin_nid,
unsigned char *buf, int *eld_size);
/* get and set channel assigned to each HDMI ASP (audio sample packet) slot */
int (*pin_get_slot_channel)(struct hda_codec *codec, hda_nid_t pin_nid,
int asp_slot);
int (*pin_set_slot_channel)(struct hda_codec *codec, hda_nid_t pin_nid,
int asp_slot, int channel);
void (*pin_setup_infoframe)(struct hda_codec *codec, hda_nid_t pin_nid,
int ca, int active_channels, int conn_type);
/* enable/disable HBR (HD passthrough) */
int (*pin_hbr_setup)(struct hda_codec *codec, hda_nid_t pin_nid, bool hbr);
int (*setup_stream)(struct hda_codec *codec, hda_nid_t cvt_nid,
hda_nid_t pin_nid, u32 stream_tag, int format);
/* Helpers for producing the channel map TLVs. These can be overridden
* for devices that have non-standard mapping requirements. */
int (*chmap_cea_alloc_validate_get_type)(struct cea_channel_speaker_allocation *cap,
int channels);
void (*cea_alloc_to_tlv_chmap)(struct cea_channel_speaker_allocation *cap,
unsigned int *chmap, int channels);
/* check that the user-given chmap is supported */
int (*chmap_validate)(int ca, int channels, unsigned char *chmap);
};
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
struct hdmi_spec {
int num_cvts;
struct snd_array cvts; /* struct hdmi_spec_per_cvt */
hda_nid_t cvt_nids[4]; /* only for haswell fix */
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
int num_pins;
struct snd_array pins; /* struct hdmi_spec_per_pin */
struct snd_array pcm_rec; /* struct hda_pcm */
unsigned int channels_max; /* max over all cvts */
struct hdmi_eld temp_eld;
struct hdmi_ops ops;
/*
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
* Non-generic VIA/NVIDIA specific
*/
struct hda_multi_out multiout;
struct hda_pcm_stream pcm_playback;
};
struct hdmi_audio_infoframe {
u8 type; /* 0x84 */
u8 ver; /* 0x01 */
u8 len; /* 0x0a */
u8 checksum;
u8 CC02_CT47; /* CC in bits 0:2, CT in 4:7 */
u8 SS01_SF24;
u8 CXT04;
u8 CA;
u8 LFEPBL01_LSV36_DM_INH7;
};
struct dp_audio_infoframe {
u8 type; /* 0x84 */
u8 len; /* 0x1b */
u8 ver; /* 0x11 << 2 */
u8 CC02_CT47; /* match with HDMI infoframe from this on */
u8 SS01_SF24;
u8 CXT04;
u8 CA;
u8 LFEPBL01_LSV36_DM_INH7;
};
union audio_infoframe {
struct hdmi_audio_infoframe hdmi;
struct dp_audio_infoframe dp;
u8 bytes[0];
};
/*
* CEA speaker placement:
*
* FLH FCH FRH
* FLW FL FLC FC FRC FR FRW
*
* LFE
* TC
*
* RL RLC RC RRC RR
*
* The Left/Right Surround channel _notions_ LS/RS in SMPTE 320M corresponds to
* CEA RL/RR; The SMPTE channel _assignment_ C/LFE is swapped to CEA LFE/FC.
*/
enum cea_speaker_placement {
FL = (1 << 0), /* Front Left */
FC = (1 << 1), /* Front Center */
FR = (1 << 2), /* Front Right */
FLC = (1 << 3), /* Front Left Center */
FRC = (1 << 4), /* Front Right Center */
RL = (1 << 5), /* Rear Left */
RC = (1 << 6), /* Rear Center */
RR = (1 << 7), /* Rear Right */
RLC = (1 << 8), /* Rear Left Center */
RRC = (1 << 9), /* Rear Right Center */
LFE = (1 << 10), /* Low Frequency Effect */
FLW = (1 << 11), /* Front Left Wide */
FRW = (1 << 12), /* Front Right Wide */
FLH = (1 << 13), /* Front Left High */
FCH = (1 << 14), /* Front Center High */
FRH = (1 << 15), /* Front Right High */
TC = (1 << 16), /* Top Center */
};
/*
* ELD SA bits in the CEA Speaker Allocation data block
*/
static int eld_speaker_allocation_bits[] = {
[0] = FL | FR,
[1] = LFE,
[2] = FC,
[3] = RL | RR,
[4] = RC,
[5] = FLC | FRC,
[6] = RLC | RRC,
/* the following are not defined in ELD yet */
[7] = FLW | FRW,
[8] = FLH | FRH,
[9] = TC,
[10] = FCH,
};
struct cea_channel_speaker_allocation {
int ca_index;
int speakers[8];
/* derived values, just for convenience */
int channels;
int spk_mask;
};
/*
* ALSA sequence is:
*
* surround40 surround41 surround50 surround51 surround71
* ch0 front left = = = =
* ch1 front right = = = =
* ch2 rear left = = = =
* ch3 rear right = = = =
* ch4 LFE center center center
* ch5 LFE LFE
* ch6 side left
* ch7 side right
*
* surround71 = {FL, FR, RLC, RRC, FC, LFE, RL, RR}
*/
static int hdmi_channel_mapping[0x32][8] = {
/* stereo */
[0x00] = { 0x00, 0x11, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7 },
/* 2.1 */
[0x01] = { 0x00, 0x11, 0x22, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7 },
/* Dolby Surround */
[0x02] = { 0x00, 0x11, 0x23, 0xf2, 0xf4, 0xf5, 0xf6, 0xf7 },
/* surround40 */
[0x08] = { 0x00, 0x11, 0x24, 0x35, 0xf3, 0xf2, 0xf6, 0xf7 },
/* 4ch */
[0x03] = { 0x00, 0x11, 0x23, 0x32, 0x44, 0xf5, 0xf6, 0xf7 },
/* surround41 */
[0x09] = { 0x00, 0x11, 0x24, 0x35, 0x42, 0xf3, 0xf6, 0xf7 },
/* surround50 */
[0x0a] = { 0x00, 0x11, 0x24, 0x35, 0x43, 0xf2, 0xf6, 0xf7 },
/* surround51 */
[0x0b] = { 0x00, 0x11, 0x24, 0x35, 0x43, 0x52, 0xf6, 0xf7 },
/* 7.1 */
[0x13] = { 0x00, 0x11, 0x26, 0x37, 0x43, 0x52, 0x64, 0x75 },
};
/*
* This is an ordered list!
*
* The preceding ones have better chances to be selected by
* hdmi_channel_allocation().
*/
static struct cea_channel_speaker_allocation channel_allocations[] = {
/* channel: 7 6 5 4 3 2 1 0 */
{ .ca_index = 0x00, .speakers = { 0, 0, 0, 0, 0, 0, FR, FL } },
/* 2.1 */
{ .ca_index = 0x01, .speakers = { 0, 0, 0, 0, 0, LFE, FR, FL } },
/* Dolby Surround */
{ .ca_index = 0x02, .speakers = { 0, 0, 0, 0, FC, 0, FR, FL } },
/* surround40 */
{ .ca_index = 0x08, .speakers = { 0, 0, RR, RL, 0, 0, FR, FL } },
/* surround41 */
{ .ca_index = 0x09, .speakers = { 0, 0, RR, RL, 0, LFE, FR, FL } },
/* surround50 */
{ .ca_index = 0x0a, .speakers = { 0, 0, RR, RL, FC, 0, FR, FL } },
/* surround51 */
{ .ca_index = 0x0b, .speakers = { 0, 0, RR, RL, FC, LFE, FR, FL } },
/* 6.1 */
{ .ca_index = 0x0f, .speakers = { 0, RC, RR, RL, FC, LFE, FR, FL } },
/* surround71 */
{ .ca_index = 0x13, .speakers = { RRC, RLC, RR, RL, FC, LFE, FR, FL } },
{ .ca_index = 0x03, .speakers = { 0, 0, 0, 0, FC, LFE, FR, FL } },
{ .ca_index = 0x04, .speakers = { 0, 0, 0, RC, 0, 0, FR, FL } },
{ .ca_index = 0x05, .speakers = { 0, 0, 0, RC, 0, LFE, FR, FL } },
{ .ca_index = 0x06, .speakers = { 0, 0, 0, RC, FC, 0, FR, FL } },
{ .ca_index = 0x07, .speakers = { 0, 0, 0, RC, FC, LFE, FR, FL } },
{ .ca_index = 0x0c, .speakers = { 0, RC, RR, RL, 0, 0, FR, FL } },
{ .ca_index = 0x0d, .speakers = { 0, RC, RR, RL, 0, LFE, FR, FL } },
{ .ca_index = 0x0e, .speakers = { 0, RC, RR, RL, FC, 0, FR, FL } },
{ .ca_index = 0x10, .speakers = { RRC, RLC, RR, RL, 0, 0, FR, FL } },
{ .ca_index = 0x11, .speakers = { RRC, RLC, RR, RL, 0, LFE, FR, FL } },
{ .ca_index = 0x12, .speakers = { RRC, RLC, RR, RL, FC, 0, FR, FL } },
{ .ca_index = 0x14, .speakers = { FRC, FLC, 0, 0, 0, 0, FR, FL } },
{ .ca_index = 0x15, .speakers = { FRC, FLC, 0, 0, 0, LFE, FR, FL } },
{ .ca_index = 0x16, .speakers = { FRC, FLC, 0, 0, FC, 0, FR, FL } },
{ .ca_index = 0x17, .speakers = { FRC, FLC, 0, 0, FC, LFE, FR, FL } },
{ .ca_index = 0x18, .speakers = { FRC, FLC, 0, RC, 0, 0, FR, FL } },
{ .ca_index = 0x19, .speakers = { FRC, FLC, 0, RC, 0, LFE, FR, FL } },
{ .ca_index = 0x1a, .speakers = { FRC, FLC, 0, RC, FC, 0, FR, FL } },
{ .ca_index = 0x1b, .speakers = { FRC, FLC, 0, RC, FC, LFE, FR, FL } },
{ .ca_index = 0x1c, .speakers = { FRC, FLC, RR, RL, 0, 0, FR, FL } },
{ .ca_index = 0x1d, .speakers = { FRC, FLC, RR, RL, 0, LFE, FR, FL } },
{ .ca_index = 0x1e, .speakers = { FRC, FLC, RR, RL, FC, 0, FR, FL } },
{ .ca_index = 0x1f, .speakers = { FRC, FLC, RR, RL, FC, LFE, FR, FL } },
{ .ca_index = 0x20, .speakers = { 0, FCH, RR, RL, FC, 0, FR, FL } },
{ .ca_index = 0x21, .speakers = { 0, FCH, RR, RL, FC, LFE, FR, FL } },
{ .ca_index = 0x22, .speakers = { TC, 0, RR, RL, FC, 0, FR, FL } },
{ .ca_index = 0x23, .speakers = { TC, 0, RR, RL, FC, LFE, FR, FL } },
{ .ca_index = 0x24, .speakers = { FRH, FLH, RR, RL, 0, 0, FR, FL } },
{ .ca_index = 0x25, .speakers = { FRH, FLH, RR, RL, 0, LFE, FR, FL } },
{ .ca_index = 0x26, .speakers = { FRW, FLW, RR, RL, 0, 0, FR, FL } },
{ .ca_index = 0x27, .speakers = { FRW, FLW, RR, RL, 0, LFE, FR, FL } },
{ .ca_index = 0x28, .speakers = { TC, RC, RR, RL, FC, 0, FR, FL } },
{ .ca_index = 0x29, .speakers = { TC, RC, RR, RL, FC, LFE, FR, FL } },
{ .ca_index = 0x2a, .speakers = { FCH, RC, RR, RL, FC, 0, FR, FL } },
{ .ca_index = 0x2b, .speakers = { FCH, RC, RR, RL, FC, LFE, FR, FL } },
{ .ca_index = 0x2c, .speakers = { TC, FCH, RR, RL, FC, 0, FR, FL } },
{ .ca_index = 0x2d, .speakers = { TC, FCH, RR, RL, FC, LFE, FR, FL } },
{ .ca_index = 0x2e, .speakers = { FRH, FLH, RR, RL, FC, 0, FR, FL } },
{ .ca_index = 0x2f, .speakers = { FRH, FLH, RR, RL, FC, LFE, FR, FL } },
{ .ca_index = 0x30, .speakers = { FRW, FLW, RR, RL, FC, 0, FR, FL } },
{ .ca_index = 0x31, .speakers = { FRW, FLW, RR, RL, FC, LFE, FR, FL } },
};
/*
* HDMI routines
*/
#define get_pin(spec, idx) \
((struct hdmi_spec_per_pin *)snd_array_elem(&spec->pins, idx))
#define get_cvt(spec, idx) \
((struct hdmi_spec_per_cvt *)snd_array_elem(&spec->cvts, idx))
#define get_pcm_rec(spec, idx) \
((struct hda_pcm *)snd_array_elem(&spec->pcm_rec, idx))
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
static int pin_nid_to_pin_index(struct hdmi_spec *spec, hda_nid_t pin_nid)
{
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
int pin_idx;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++)
if (get_pin(spec, pin_idx)->pin_nid == pin_nid)
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
return pin_idx;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
snd_printk(KERN_WARNING "HDMI: pin nid %d not registered\n", pin_nid);
return -EINVAL;
}
static int hinfo_to_pin_index(struct hdmi_spec *spec,
struct hda_pcm_stream *hinfo)
{
int pin_idx;
for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++)
if (get_pcm_rec(spec, pin_idx)->stream == hinfo)
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
return pin_idx;
snd_printk(KERN_WARNING "HDMI: hinfo %p not registered\n", hinfo);
return -EINVAL;
}
static int cvt_nid_to_cvt_index(struct hdmi_spec *spec, hda_nid_t cvt_nid)
{
int cvt_idx;
for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++)
if (get_cvt(spec, cvt_idx)->cvt_nid == cvt_nid)
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
return cvt_idx;
snd_printk(KERN_WARNING "HDMI: cvt nid %d not registered\n", cvt_nid);
return -EINVAL;
}
static int hdmi_eld_ctl_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct hdmi_spec *spec = codec->spec;
struct hdmi_spec_per_pin *per_pin;
struct hdmi_eld *eld;
int pin_idx;
uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
pin_idx = kcontrol->private_value;
per_pin = get_pin(spec, pin_idx);
eld = &per_pin->sink_eld;
mutex_lock(&per_pin->lock);
uinfo->count = eld->eld_valid ? eld->eld_size : 0;
mutex_unlock(&per_pin->lock);
return 0;
}
static int hdmi_eld_ctl_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct hdmi_spec *spec = codec->spec;
struct hdmi_spec_per_pin *per_pin;
struct hdmi_eld *eld;
int pin_idx;
pin_idx = kcontrol->private_value;
per_pin = get_pin(spec, pin_idx);
eld = &per_pin->sink_eld;
mutex_lock(&per_pin->lock);
if (eld->eld_size > ARRAY_SIZE(ucontrol->value.bytes.data)) {
mutex_unlock(&per_pin->lock);
snd_BUG();
return -EINVAL;
}
memset(ucontrol->value.bytes.data, 0,
ARRAY_SIZE(ucontrol->value.bytes.data));
if (eld->eld_valid)
memcpy(ucontrol->value.bytes.data, eld->eld_buffer,
eld->eld_size);
mutex_unlock(&per_pin->lock);
return 0;
}
static struct snd_kcontrol_new eld_bytes_ctl = {
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = "ELD",
.info = hdmi_eld_ctl_info,
.get = hdmi_eld_ctl_get,
};
static int hdmi_create_eld_ctl(struct hda_codec *codec, int pin_idx,
int device)
{
struct snd_kcontrol *kctl;
struct hdmi_spec *spec = codec->spec;
int err;
kctl = snd_ctl_new1(&eld_bytes_ctl, codec);
if (!kctl)
return -ENOMEM;
kctl->private_value = pin_idx;
kctl->id.device = device;
err = snd_hda_ctl_add(codec, get_pin(spec, pin_idx)->pin_nid, kctl);
if (err < 0)
return err;
get_pin(spec, pin_idx)->eld_ctl = kctl;
return 0;
}
#ifdef BE_PARANOID
static void hdmi_get_dip_index(struct hda_codec *codec, hda_nid_t pin_nid,
int *packet_index, int *byte_index)
{
int val;
val = snd_hda_codec_read(codec, pin_nid, 0,
AC_VERB_GET_HDMI_DIP_INDEX, 0);
*packet_index = val >> 5;
*byte_index = val & 0x1f;
}
#endif
static void hdmi_set_dip_index(struct hda_codec *codec, hda_nid_t pin_nid,
int packet_index, int byte_index)
{
int val;
val = (packet_index << 5) | (byte_index & 0x1f);
snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_INDEX, val);
}
static void hdmi_write_dip_byte(struct hda_codec *codec, hda_nid_t pin_nid,
unsigned char val)
{
snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_DATA, val);
}
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
static void hdmi_init_pin(struct hda_codec *codec, hda_nid_t pin_nid)
{
/* Unmute */
if (get_wcaps(codec, pin_nid) & AC_WCAP_OUT_AMP)
snd_hda_codec_write(codec, pin_nid, 0,
AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
/* Enable pin out: some machines with GM965 gets broken output when
* the pin is disabled or changed while using with HDMI
*/
snd_hda_codec_write(codec, pin_nid, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
}
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
static int hdmi_get_channel_count(struct hda_codec *codec, hda_nid_t cvt_nid)
{
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
return 1 + snd_hda_codec_read(codec, cvt_nid, 0,
AC_VERB_GET_CVT_CHAN_COUNT, 0);
}
static void hdmi_set_channel_count(struct hda_codec *codec,
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
hda_nid_t cvt_nid, int chs)
{
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
if (chs != hdmi_get_channel_count(codec, cvt_nid))
snd_hda_codec_write(codec, cvt_nid, 0,
AC_VERB_SET_CVT_CHAN_COUNT, chs - 1);
}
/*
* ELD proc files
*/
#ifdef CONFIG_PROC_FS
static void print_eld_info(struct snd_info_entry *entry,
struct snd_info_buffer *buffer)
{
struct hdmi_spec_per_pin *per_pin = entry->private_data;
mutex_lock(&per_pin->lock);
snd_hdmi_print_eld_info(&per_pin->sink_eld, buffer);
mutex_unlock(&per_pin->lock);
}
static void write_eld_info(struct snd_info_entry *entry,
struct snd_info_buffer *buffer)
{
struct hdmi_spec_per_pin *per_pin = entry->private_data;
mutex_lock(&per_pin->lock);
snd_hdmi_write_eld_info(&per_pin->sink_eld, buffer);
mutex_unlock(&per_pin->lock);
}
static int eld_proc_new(struct hdmi_spec_per_pin *per_pin, int index)
{
char name[32];
struct hda_codec *codec = per_pin->codec;
struct snd_info_entry *entry;
int err;
snprintf(name, sizeof(name), "eld#%d.%d", codec->addr, index);
err = snd_card_proc_new(codec->bus->card, name, &entry);
if (err < 0)
return err;
snd_info_set_text_ops(entry, per_pin, print_eld_info);
entry->c.text.write = write_eld_info;
entry->mode |= S_IWUSR;
per_pin->proc_entry = entry;
return 0;
}
static void eld_proc_free(struct hdmi_spec_per_pin *per_pin)
{
if (!per_pin->codec->bus->shutdown && per_pin->proc_entry) {
snd_device_free(per_pin->codec->bus->card, per_pin->proc_entry);
per_pin->proc_entry = NULL;
}
}
#else
static inline int eld_proc_new(struct hdmi_spec_per_pin *per_pin,
int index)
{
return 0;
}
static inline void eld_proc_free(struct hdmi_spec_per_pin *per_pin)
{
}
#endif
/*
* Channel mapping routines
*/
/*
* Compute derived values in channel_allocations[].
*/
static void init_channel_allocations(void)
{
int i, j;
struct cea_channel_speaker_allocation *p;
for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
p = channel_allocations + i;
p->channels = 0;
p->spk_mask = 0;
for (j = 0; j < ARRAY_SIZE(p->speakers); j++)
if (p->speakers[j]) {
p->channels++;
p->spk_mask |= p->speakers[j];
}
}
}
static int get_channel_allocation_order(int ca)
{
int i;
for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
if (channel_allocations[i].ca_index == ca)
break;
}
return i;
}
/*
* The transformation takes two steps:
*
* eld->spk_alloc => (eld_speaker_allocation_bits[]) => spk_mask
* spk_mask => (channel_allocations[]) => ai->CA
*
* TODO: it could select the wrong CA from multiple candidates.
*/
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
static int hdmi_channel_allocation(struct hdmi_eld *eld, int channels)
{
int i;
int ca = 0;
int spk_mask = 0;
char buf[SND_PRINT_CHANNEL_ALLOCATION_ADVISED_BUFSIZE];
/*
* CA defaults to 0 for basic stereo audio
*/
if (channels <= 2)
return 0;
/*
* expand ELD's speaker allocation mask
*
* ELD tells the speaker mask in a compact(paired) form,
* expand ELD's notions to match the ones used by Audio InfoFrame.
*/
for (i = 0; i < ARRAY_SIZE(eld_speaker_allocation_bits); i++) {
if (eld->info.spk_alloc & (1 << i))
spk_mask |= eld_speaker_allocation_bits[i];
}
/* search for the first working match in the CA table */
for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
if (channels == channel_allocations[i].channels &&
(spk_mask & channel_allocations[i].spk_mask) ==
channel_allocations[i].spk_mask) {
ca = channel_allocations[i].ca_index;
break;
}
}
ALSA: hda - hdmi: Fallback to ALSA allocation when selecting CA hdmi_channel_allocation() tries to find a HDMI channel allocation that matches the number channels in the playback stream and contains only speakers that the HDMI sink has reported as available via EDID. If no such allocation is found, 0 (stereo audio) is used. Using CA 0 causes the audio causes the sink to discard everything except the first two channels (front left and front right). However, the sink may be capable of receiving more channels than it has speakers (and then perform downmix or discard the extra channels), in which case it is preferable to use a CA that contains extra channels than to use CA 0 which discards all the non-stereo channels. Additionally, it seems that HBR (HD) passthrough output does not work on Intel HDMI codecs when CA is set to 0 (possibly the codec zeroes channels not present in CA). This happens with all receivers that report a 5.1 speaker mask since a HBR stream is carried on 8 channels to the codec. Add a fallback in the CA selection so that the CA channel count at least matches the stream channel count, even if the stream contains channels not present in the sink speaker descriptor. Thanks to GrimGriefer at OpenELEC forums for discovering that changing the sink speaker mask allowed HBR output. Reported-by: GrimGriefer Reported-by: Ashecrow Reported-by: Frank Zafka <kafkaesque1978@gmail.com> Reported-by: Peter Frühberger <fritsch@xbmc.org> Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-01 11:36:47 +00:00
if (!ca) {
/* if there was no match, select the regular ALSA channel
* allocation with the matching number of channels */
for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
if (channels == channel_allocations[i].channels) {
ca = channel_allocations[i].ca_index;
break;
}
}
}
snd_print_channel_allocation(eld->info.spk_alloc, buf, sizeof(buf));
snd_printdd("HDMI: select CA 0x%x for %d-channel allocation: %s\n",
ca, channels, buf);
return ca;
}
static void hdmi_debug_channel_mapping(struct hda_codec *codec,
hda_nid_t pin_nid)
{
#ifdef CONFIG_SND_DEBUG_VERBOSE
struct hdmi_spec *spec = codec->spec;
int i;
int channel;
for (i = 0; i < 8; i++) {
channel = spec->ops.pin_get_slot_channel(codec, pin_nid, i);
printk(KERN_DEBUG "HDMI: ASP channel %d => slot %d\n",
channel, i);
}
#endif
}
static void hdmi_std_setup_channel_mapping(struct hda_codec *codec,
hda_nid_t pin_nid,
bool non_pcm,
int ca)
{
struct hdmi_spec *spec = codec->spec;
struct cea_channel_speaker_allocation *ch_alloc;
int i;
int err;
int order;
int non_pcm_mapping[8];
order = get_channel_allocation_order(ca);
ch_alloc = &channel_allocations[order];
if (hdmi_channel_mapping[ca][1] == 0) {
int hdmi_slot = 0;
/* fill actual channel mappings in ALSA channel (i) order */
for (i = 0; i < ch_alloc->channels; i++) {
while (!ch_alloc->speakers[7 - hdmi_slot] && !WARN_ON(hdmi_slot >= 8))
hdmi_slot++; /* skip zero slots */
hdmi_channel_mapping[ca][i] = (i << 4) | hdmi_slot++;
}
/* fill the rest of the slots with ALSA channel 0xf */
for (hdmi_slot = 0; hdmi_slot < 8; hdmi_slot++)
if (!ch_alloc->speakers[7 - hdmi_slot])
hdmi_channel_mapping[ca][i++] = (0xf << 4) | hdmi_slot;
}
if (non_pcm) {
for (i = 0; i < ch_alloc->channels; i++)
non_pcm_mapping[i] = (i << 4) | i;
for (; i < 8; i++)
non_pcm_mapping[i] = (0xf << 4) | i;
}
for (i = 0; i < 8; i++) {
int slotsetup = non_pcm ? non_pcm_mapping[i] : hdmi_channel_mapping[ca][i];
int hdmi_slot = slotsetup & 0x0f;
int channel = (slotsetup & 0xf0) >> 4;
err = spec->ops.pin_set_slot_channel(codec, pin_nid, hdmi_slot, channel);
if (err) {
snd_printdd(KERN_NOTICE
"HDMI: channel mapping failed\n");
break;
}
}
}
struct channel_map_table {
unsigned char map; /* ALSA API channel map position */
int spk_mask; /* speaker position bit mask */
};
static struct channel_map_table map_tables[] = {
{ SNDRV_CHMAP_FL, FL },
{ SNDRV_CHMAP_FR, FR },
{ SNDRV_CHMAP_RL, RL },
{ SNDRV_CHMAP_RR, RR },
{ SNDRV_CHMAP_LFE, LFE },
{ SNDRV_CHMAP_FC, FC },
{ SNDRV_CHMAP_RLC, RLC },
{ SNDRV_CHMAP_RRC, RRC },
{ SNDRV_CHMAP_RC, RC },
{ SNDRV_CHMAP_FLC, FLC },
{ SNDRV_CHMAP_FRC, FRC },
{ SNDRV_CHMAP_FLH, FLH },
{ SNDRV_CHMAP_FRH, FRH },
{ SNDRV_CHMAP_FLW, FLW },
{ SNDRV_CHMAP_FRW, FRW },
{ SNDRV_CHMAP_TC, TC },
{ SNDRV_CHMAP_FCH, FCH },
{} /* terminator */
};
/* from ALSA API channel position to speaker bit mask */
static int to_spk_mask(unsigned char c)
{
struct channel_map_table *t = map_tables;
for (; t->map; t++) {
if (t->map == c)
return t->spk_mask;
}
return 0;
}
/* from ALSA API channel position to CEA slot */
static int to_cea_slot(int ordered_ca, unsigned char pos)
{
int mask = to_spk_mask(pos);
int i;
if (mask) {
for (i = 0; i < 8; i++) {
if (channel_allocations[ordered_ca].speakers[7 - i] == mask)
return i;
}
}
return -1;
}
/* from speaker bit mask to ALSA API channel position */
static int spk_to_chmap(int spk)
{
struct channel_map_table *t = map_tables;
for (; t->map; t++) {
if (t->spk_mask == spk)
return t->map;
}
return 0;
}
/* from CEA slot to ALSA API channel position */
static int from_cea_slot(int ordered_ca, unsigned char slot)
{
int mask = channel_allocations[ordered_ca].speakers[7 - slot];
return spk_to_chmap(mask);
}
/* get the CA index corresponding to the given ALSA API channel map */
static int hdmi_manual_channel_allocation(int chs, unsigned char *map)
{
int i, spks = 0, spk_mask = 0;
for (i = 0; i < chs; i++) {
int mask = to_spk_mask(map[i]);
if (mask) {
spk_mask |= mask;
spks++;
}
}
for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
if ((chs == channel_allocations[i].channels ||
spks == channel_allocations[i].channels) &&
(spk_mask & channel_allocations[i].spk_mask) ==
channel_allocations[i].spk_mask)
return channel_allocations[i].ca_index;
}
return -1;
}
/* set up the channel slots for the given ALSA API channel map */
static int hdmi_manual_setup_channel_mapping(struct hda_codec *codec,
hda_nid_t pin_nid,
int chs, unsigned char *map,
int ca)
{
struct hdmi_spec *spec = codec->spec;
int ordered_ca = get_channel_allocation_order(ca);
int alsa_pos, hdmi_slot;
int assignments[8] = {[0 ... 7] = 0xf};
for (alsa_pos = 0; alsa_pos < chs; alsa_pos++) {
hdmi_slot = to_cea_slot(ordered_ca, map[alsa_pos]);
if (hdmi_slot < 0)
continue; /* unassigned channel */
assignments[hdmi_slot] = alsa_pos;
}
for (hdmi_slot = 0; hdmi_slot < 8; hdmi_slot++) {
int err;
err = spec->ops.pin_set_slot_channel(codec, pin_nid, hdmi_slot,
assignments[hdmi_slot]);
if (err)
return -EINVAL;
}
return 0;
}
/* store ALSA API channel map from the current default map */
static void hdmi_setup_fake_chmap(unsigned char *map, int ca)
{
int i;
int ordered_ca = get_channel_allocation_order(ca);
for (i = 0; i < 8; i++) {
if (i < channel_allocations[ordered_ca].channels)
map[i] = from_cea_slot(ordered_ca, hdmi_channel_mapping[ca][i] & 0x0f);
else
map[i] = 0;
}
}
static void hdmi_setup_channel_mapping(struct hda_codec *codec,
hda_nid_t pin_nid, bool non_pcm, int ca,
int channels, unsigned char *map,
bool chmap_set)
{
if (!non_pcm && chmap_set) {
hdmi_manual_setup_channel_mapping(codec, pin_nid,
channels, map, ca);
} else {
hdmi_std_setup_channel_mapping(codec, pin_nid, non_pcm, ca);
hdmi_setup_fake_chmap(map, ca);
}
hdmi_debug_channel_mapping(codec, pin_nid);
}
static int hdmi_pin_set_slot_channel(struct hda_codec *codec, hda_nid_t pin_nid,
int asp_slot, int channel)
{
return snd_hda_codec_write(codec, pin_nid, 0,
AC_VERB_SET_HDMI_CHAN_SLOT,
(channel << 4) | asp_slot);
}
static int hdmi_pin_get_slot_channel(struct hda_codec *codec, hda_nid_t pin_nid,
int asp_slot)
{
return (snd_hda_codec_read(codec, pin_nid, 0,
AC_VERB_GET_HDMI_CHAN_SLOT,
asp_slot) & 0xf0) >> 4;
}
/*
* Audio InfoFrame routines
*/
/*
* Enable Audio InfoFrame Transmission
*/
static void hdmi_start_infoframe_trans(struct hda_codec *codec,
hda_nid_t pin_nid)
{
hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
AC_DIPXMIT_BEST);
}
/*
* Disable Audio InfoFrame Transmission
*/
static void hdmi_stop_infoframe_trans(struct hda_codec *codec,
hda_nid_t pin_nid)
{
hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
AC_DIPXMIT_DISABLE);
}
static void hdmi_debug_dip_size(struct hda_codec *codec, hda_nid_t pin_nid)
{
#ifdef CONFIG_SND_DEBUG_VERBOSE
int i;
int size;
size = snd_hdmi_get_eld_size(codec, pin_nid);
printk(KERN_DEBUG "HDMI: ELD buf size is %d\n", size);
for (i = 0; i < 8; i++) {
size = snd_hda_codec_read(codec, pin_nid, 0,
AC_VERB_GET_HDMI_DIP_SIZE, i);
printk(KERN_DEBUG "HDMI: DIP GP[%d] buf size is %d\n", i, size);
}
#endif
}
static void hdmi_clear_dip_buffers(struct hda_codec *codec, hda_nid_t pin_nid)
{
#ifdef BE_PARANOID
int i, j;
int size;
int pi, bi;
for (i = 0; i < 8; i++) {
size = snd_hda_codec_read(codec, pin_nid, 0,
AC_VERB_GET_HDMI_DIP_SIZE, i);
if (size == 0)
continue;
hdmi_set_dip_index(codec, pin_nid, i, 0x0);
for (j = 1; j < 1000; j++) {
hdmi_write_dip_byte(codec, pin_nid, 0x0);
hdmi_get_dip_index(codec, pin_nid, &pi, &bi);
if (pi != i)
snd_printd(KERN_INFO "dip index %d: %d != %d\n",
bi, pi, i);
if (bi == 0) /* byte index wrapped around */
break;
}
snd_printd(KERN_INFO
"HDMI: DIP GP[%d] buf reported size=%d, written=%d\n",
i, size, j);
}
#endif
}
static void hdmi_checksum_audio_infoframe(struct hdmi_audio_infoframe *hdmi_ai)
{
u8 *bytes = (u8 *)hdmi_ai;
u8 sum = 0;
int i;
hdmi_ai->checksum = 0;
for (i = 0; i < sizeof(*hdmi_ai); i++)
sum += bytes[i];
hdmi_ai->checksum = -sum;
}
static void hdmi_fill_audio_infoframe(struct hda_codec *codec,
hda_nid_t pin_nid,
u8 *dip, int size)
{
int i;
hdmi_debug_dip_size(codec, pin_nid);
hdmi_clear_dip_buffers(codec, pin_nid); /* be paranoid */
hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
for (i = 0; i < size; i++)
hdmi_write_dip_byte(codec, pin_nid, dip[i]);
}
static bool hdmi_infoframe_uptodate(struct hda_codec *codec, hda_nid_t pin_nid,
u8 *dip, int size)
{
u8 val;
int i;
if (snd_hda_codec_read(codec, pin_nid, 0, AC_VERB_GET_HDMI_DIP_XMIT, 0)
!= AC_DIPXMIT_BEST)
return false;
hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
for (i = 0; i < size; i++) {
val = snd_hda_codec_read(codec, pin_nid, 0,
AC_VERB_GET_HDMI_DIP_DATA, 0);
if (val != dip[i])
return false;
}
return true;
}
static void hdmi_pin_setup_infoframe(struct hda_codec *codec,
hda_nid_t pin_nid,
int ca, int active_channels,
int conn_type)
{
union audio_infoframe ai;
if (conn_type == 0) { /* HDMI */
struct hdmi_audio_infoframe *hdmi_ai = &ai.hdmi;
hdmi_ai->type = 0x84;
hdmi_ai->ver = 0x01;
hdmi_ai->len = 0x0a;
hdmi_ai->CC02_CT47 = active_channels - 1;
hdmi_ai->CA = ca;
hdmi_checksum_audio_infoframe(hdmi_ai);
} else if (conn_type == 1) { /* DisplayPort */
struct dp_audio_infoframe *dp_ai = &ai.dp;
dp_ai->type = 0x84;
dp_ai->len = 0x1b;
dp_ai->ver = 0x11 << 2;
dp_ai->CC02_CT47 = active_channels - 1;
dp_ai->CA = ca;
} else {
snd_printd("HDMI: unknown connection type at pin %d\n",
pin_nid);
return;
}
/*
* sizeof(ai) is used instead of sizeof(*hdmi_ai) or
* sizeof(*dp_ai) to avoid partial match/update problems when
* the user switches between HDMI/DP monitors.
*/
if (!hdmi_infoframe_uptodate(codec, pin_nid, ai.bytes,
sizeof(ai))) {
snd_printdd("hdmi_pin_setup_infoframe: "
"pin=%d channels=%d ca=0x%02x\n",
pin_nid,
active_channels, ca);
hdmi_stop_infoframe_trans(codec, pin_nid);
hdmi_fill_audio_infoframe(codec, pin_nid,
ai.bytes, sizeof(ai));
hdmi_start_infoframe_trans(codec, pin_nid);
}
}
static void hdmi_setup_audio_infoframe(struct hda_codec *codec,
struct hdmi_spec_per_pin *per_pin,
bool non_pcm)
{
struct hdmi_spec *spec = codec->spec;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
hda_nid_t pin_nid = per_pin->pin_nid;
int channels = per_pin->channels;
2013-10-04 23:25:40 +00:00
int active_channels;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
struct hdmi_eld *eld;
2013-10-04 23:25:40 +00:00
int ca, ordered_ca;
if (!channels)
return;
if (is_haswell(codec))
snd_hda_codec_write(codec, pin_nid, 0,
AC_VERB_SET_AMP_GAIN_MUTE,
AMP_OUT_UNMUTE);
eld = &per_pin->sink_eld;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
if (!eld->monitor_present)
return;
if (!non_pcm && per_pin->chmap_set)
ca = hdmi_manual_channel_allocation(channels, per_pin->chmap);
else
ca = hdmi_channel_allocation(eld, channels);
if (ca < 0)
ca = 0;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
2013-10-04 23:25:40 +00:00
ordered_ca = get_channel_allocation_order(ca);
active_channels = channel_allocations[ordered_ca].channels;
hdmi_set_channel_count(codec, per_pin->cvt_nid, active_channels);
/*
* always configure channel mapping, it may have been changed by the
* user in the meantime
*/
hdmi_setup_channel_mapping(codec, pin_nid, non_pcm, ca,
channels, per_pin->chmap,
per_pin->chmap_set);
spec->ops.pin_setup_infoframe(codec, pin_nid, ca, active_channels,
eld->info.conn_type);
per_pin->non_pcm = non_pcm;
}
/*
* Unsolicited events
*/
static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll);
static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
{
struct hdmi_spec *spec = codec->spec;
int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
int pin_nid;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
int pin_idx;
struct hda_jack_tbl *jack;
int dev_entry = (res & AC_UNSOL_RES_DE) >> AC_UNSOL_RES_DE_SHIFT;
jack = snd_hda_jack_tbl_get_from_tag(codec, tag);
if (!jack)
return;
pin_nid = jack->nid;
jack->jack_dirty = 1;
_snd_printd(SND_PR_VERBOSE,
"HDMI hot plug event: Codec=%d Pin=%d Device=%d Inactive=%d Presence_Detect=%d ELD_Valid=%d\n",
codec->addr, pin_nid, dev_entry, !!(res & AC_UNSOL_RES_IA),
!!(res & AC_UNSOL_RES_PD), !!(res & AC_UNSOL_RES_ELDV));
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
pin_idx = pin_nid_to_pin_index(spec, pin_nid);
if (pin_idx < 0)
return;
hdmi_present_sense(get_pin(spec, pin_idx), 1);
snd_hda_jack_report_sync(codec);
}
static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res)
{
int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
int subtag = (res & AC_UNSOL_RES_SUBTAG) >> AC_UNSOL_RES_SUBTAG_SHIFT;
int cp_state = !!(res & AC_UNSOL_RES_CP_STATE);
int cp_ready = !!(res & AC_UNSOL_RES_CP_READY);
printk(KERN_INFO
"HDMI CP event: CODEC=%d TAG=%d SUBTAG=0x%x CP_STATE=%d CP_READY=%d\n",
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
codec->addr,
tag,
subtag,
cp_state,
cp_ready);
/* TODO */
if (cp_state)
;
if (cp_ready)
;
}
static void hdmi_unsol_event(struct hda_codec *codec, unsigned int res)
{
int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
int subtag = (res & AC_UNSOL_RES_SUBTAG) >> AC_UNSOL_RES_SUBTAG_SHIFT;
if (!snd_hda_jack_tbl_get_from_tag(codec, tag)) {
snd_printd(KERN_INFO "Unexpected HDMI event tag 0x%x\n", tag);
return;
}
if (subtag == 0)
hdmi_intrinsic_event(codec, res);
else
hdmi_non_intrinsic_event(codec, res);
}
static void haswell_verify_D0(struct hda_codec *codec,
hda_nid_t cvt_nid, hda_nid_t nid)
{
int pwr;
/* For Haswell, the converter 1/2 may keep in D3 state after bootup,
* thus pins could only choose converter 0 for use. Make sure the
* converters are in correct power state */
if (!snd_hda_check_power_state(codec, cvt_nid, AC_PWRST_D0))
snd_hda_codec_write(codec, cvt_nid, 0, AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
if (!snd_hda_check_power_state(codec, nid, AC_PWRST_D0)) {
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_POWER_STATE,
AC_PWRST_D0);
msleep(40);
pwr = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_POWER_STATE, 0);
pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT;
snd_printd("Haswell HDMI audio: Power for pin 0x%x is now D%d\n", nid, pwr);
}
}
/*
* Callbacks
*/
/* HBR should be Non-PCM, 8 channels */
#define is_hbr_format(format) \
((format & AC_FMT_TYPE_NON_PCM) && (format & AC_FMT_CHAN_MASK) == 7)
static int hdmi_pin_hbr_setup(struct hda_codec *codec, hda_nid_t pin_nid,
bool hbr)
{
int pinctl, new_pinctl;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
if (snd_hda_query_pin_caps(codec, pin_nid) & AC_PINCAP_HBR) {
pinctl = snd_hda_codec_read(codec, pin_nid, 0,
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
new_pinctl = pinctl & ~AC_PINCTL_EPT;
if (hbr)
new_pinctl |= AC_PINCTL_EPT_HBR;
else
new_pinctl |= AC_PINCTL_EPT_NATIVE;
snd_printdd("hdmi_pin_hbr_setup: "
"NID=0x%x, %spinctl=0x%x\n",
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
pin_nid,
pinctl == new_pinctl ? "" : "new-",
new_pinctl);
if (pinctl != new_pinctl)
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
snd_hda_codec_write(codec, pin_nid, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL,
new_pinctl);
} else if (hbr)
return -EINVAL;
return 0;
}
static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid,
hda_nid_t pin_nid, u32 stream_tag, int format)
{
struct hdmi_spec *spec = codec->spec;
int err;
if (is_haswell(codec))
haswell_verify_D0(codec, cvt_nid, pin_nid);
err = spec->ops.pin_hbr_setup(codec, pin_nid, is_hbr_format(format));
if (err) {
snd_printdd("hdmi_setup_stream: HBR is not supported\n");
return err;
}
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
snd_hda_codec_setup_stream(codec, cvt_nid, stream_tag, 0, format);
return 0;
}
static int hdmi_choose_cvt(struct hda_codec *codec,
int pin_idx, int *cvt_id, int *mux_id)
{
struct hdmi_spec *spec = codec->spec;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
struct hdmi_spec_per_pin *per_pin;
struct hdmi_spec_per_cvt *per_cvt = NULL;
int cvt_idx, mux_idx = 0;
per_pin = get_pin(spec, pin_idx);
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
/* Dynamically assign converter to stream */
for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) {
per_cvt = get_cvt(spec, cvt_idx);
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
/* Must not already be assigned */
if (per_cvt->assigned)
continue;
/* Must be in pin's mux's list of converters */
for (mux_idx = 0; mux_idx < per_pin->num_mux_nids; mux_idx++)
if (per_pin->mux_nids[mux_idx] == per_cvt->cvt_nid)
break;
/* Not in mux list */
if (mux_idx == per_pin->num_mux_nids)
continue;
break;
}
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
/* No free converters */
if (cvt_idx == spec->num_cvts)
return -ENODEV;
if (cvt_id)
*cvt_id = cvt_idx;
if (mux_id)
*mux_id = mux_idx;
return 0;
}
static void not_share_unassigned_cvt(struct hda_codec *codec,
hda_nid_t pin_nid, int mux_idx)
{
struct hdmi_spec *spec = codec->spec;
hda_nid_t nid, end_nid;
int cvt_idx, curr;
struct hdmi_spec_per_cvt *per_cvt;
/* configure all pins, including "no physical connection" ones */
end_nid = codec->start_nid + codec->num_nodes;
for (nid = codec->start_nid; nid < end_nid; nid++) {
unsigned int wid_caps = get_wcaps(codec, nid);
unsigned int wid_type = get_wcaps_type(wid_caps);
if (wid_type != AC_WID_PIN)
continue;
if (nid == pin_nid)
continue;
curr = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_CONNECT_SEL, 0);
if (curr != mux_idx)
continue;
/* choose an unassigned converter. The conveters in the
* connection list are in the same order as in the codec.
*/
for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) {
per_cvt = get_cvt(spec, cvt_idx);
if (!per_cvt->assigned) {
snd_printdd("choose cvt %d for pin nid %d\n",
cvt_idx, nid);
snd_hda_codec_write_cache(codec, nid, 0,
AC_VERB_SET_CONNECT_SEL,
cvt_idx);
break;
}
}
}
}
/*
* HDA PCM callbacks
*/
static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
struct snd_pcm_substream *substream)
{
struct hdmi_spec *spec = codec->spec;
struct snd_pcm_runtime *runtime = substream->runtime;
int pin_idx, cvt_idx, mux_idx = 0;
struct hdmi_spec_per_pin *per_pin;
struct hdmi_eld *eld;
struct hdmi_spec_per_cvt *per_cvt = NULL;
int err;
/* Validate hinfo */
pin_idx = hinfo_to_pin_index(spec, hinfo);
if (snd_BUG_ON(pin_idx < 0))
return -EINVAL;
per_pin = get_pin(spec, pin_idx);
eld = &per_pin->sink_eld;
err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx, &mux_idx);
if (err < 0)
return err;
per_cvt = get_cvt(spec, cvt_idx);
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
/* Claim converter */
per_cvt->assigned = 1;
2013-10-04 23:25:40 +00:00
per_pin->cvt_nid = per_cvt->cvt_nid;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
hinfo->nid = per_cvt->cvt_nid;
snd_hda_codec_write_cache(codec, per_pin->pin_nid, 0,
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
AC_VERB_SET_CONNECT_SEL,
mux_idx);
/* configure unused pins to choose other converters */
if (is_haswell(codec) || is_valleyview(codec))
not_share_unassigned_cvt(codec, per_pin->pin_nid, mux_idx);
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
snd_hda_spdif_ctls_assign(codec, pin_idx, per_cvt->cvt_nid);
/* Initially set the converter's capabilities */
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
hinfo->channels_min = per_cvt->channels_min;
hinfo->channels_max = per_cvt->channels_max;
hinfo->rates = per_cvt->rates;
hinfo->formats = per_cvt->formats;
hinfo->maxbps = per_cvt->maxbps;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
/* Restrict capabilities by ELD if this isn't disabled */
if (!static_hdmi_pcm && eld->eld_valid) {
snd_hdmi_eld_update_pcm_info(&eld->info, hinfo);
if (hinfo->channels_min > hinfo->channels_max ||
!hinfo->rates || !hinfo->formats) {
per_cvt->assigned = 0;
hinfo->nid = 0;
snd_hda_spdif_ctls_unassign(codec, pin_idx);
return -ENODEV;
}
}
/* Store the updated parameters */
runtime->hw.channels_min = hinfo->channels_min;
runtime->hw.channels_max = hinfo->channels_max;
runtime->hw.formats = hinfo->formats;
runtime->hw.rates = hinfo->rates;
snd_pcm_hw_constraint_step(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_CHANNELS, 2);
return 0;
}
/*
* HDA/HDMI auto parsing
*/
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
static int hdmi_read_pin_conn(struct hda_codec *codec, int pin_idx)
{
struct hdmi_spec *spec = codec->spec;
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
hda_nid_t pin_nid = per_pin->pin_nid;
if (!(get_wcaps(codec, pin_nid) & AC_WCAP_CONN_LIST)) {
snd_printk(KERN_WARNING
"HDMI: pin %d wcaps %#x "
"does not support connection list\n",
pin_nid, get_wcaps(codec, pin_nid));
return -EINVAL;
}
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
per_pin->num_mux_nids = snd_hda_get_connections(codec, pin_nid,
per_pin->mux_nids,
HDA_MAX_CONNECTIONS);
return 0;
}
static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
{
struct hda_codec *codec = per_pin->codec;
struct hdmi_spec *spec = codec->spec;
struct hdmi_eld *eld = &spec->temp_eld;
struct hdmi_eld *pin_eld = &per_pin->sink_eld;
hda_nid_t pin_nid = per_pin->pin_nid;
ALSA: HDA: Unify HDMI hotplug handling. This change unifies the initial handling of a pin's state with the code to update a pin's state after a hotplug (unsolicited response) event. The initial probing, and all updates, are now routed through hdmi_present_sense. The stored PD and ELDV status is now always derived from GetPinSense verb execution, and not from the data in the unsolicited response. This means: a) The WAR for NVIDIA codec's UR.PD values ("old_pin_detect") can be removed, since this only affected the no-longer-used unsolicited response payload. b) In turn, this means that most NVIDIA codecs can simply use patch_generic_hdmi instead of having a custom variant just to set old_pin_detect. c) When PD && ELDV becomes true, no extra verbs are executed, because the GetPinSense that was previously executed by snd_hdmi_get_eld (really, hdmi_eld_valid) has simply moved into hdmi_present_sense. d) When PD && ELDV becomes false, there is a single extra GetPinSense verb executed for codecs where old_pin_detect wasn't set, i.e. some NVIDIA, and all ATI/AMD and Intel codecs. I doubt this will be a performance issue. The new unified code in hdmi_present_sense also ensures that eld->eld_valid is not set unless eld->monitor_present is also set. This protects against potential invalid combinations of PD and ELDV received from HW, and transitively from a graphics driver. Also, print the derived PD/ELDV bits from hdmi_present_sense so the kernel log always displays the actual state stored, which will differ from the values in the unsolicited response for NVIDIA HW where old_pin_detect was previously set. Finally, a couple of small tweaks originally by Takashi: * Clear the ELD content to zero before reading it, so that if it's not read (i.e. when !(PD && ELDV)) it's in a known state. * Don't show ELD fields in /proc ELD files when the ELD isn't valid. The only possibility I can see for regression here is a codec where the GetPinSense verb returns incorrect data. However, we're already exposed to that, since that data is used (a) from hdmi_add_pin to set up the initial pin state, and (b) within snd_hda_input_jack_report to query a pin's presence value. As such, I don't believe any HW has bugs here. Includes-changes-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-24 23:11:17 +00:00
/*
* Always execute a GetPinSense verb here, even when called from
* hdmi_intrinsic_event; for some NVIDIA HW, the unsolicited
* response's PD bit is not the real PD value, but indicates that
* the real PD value changed. An older version of the HD-audio
* specification worked this way. Hence, we just ignore the data in
* the unsolicited response to avoid custom WARs.
*/
int present = snd_hda_pin_sense(codec, pin_nid);
bool update_eld = false;
bool eld_changed = false;
mutex_lock(&per_pin->lock);
pin_eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE);
if (pin_eld->monitor_present)
eld->eld_valid = !!(present & AC_PINSENSE_ELDV);
else
eld->eld_valid = false;
_snd_printd(SND_PR_VERBOSE,
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
codec->addr, pin_nid, pin_eld->monitor_present, eld->eld_valid);
ALSA: HDA: Unify HDMI hotplug handling. This change unifies the initial handling of a pin's state with the code to update a pin's state after a hotplug (unsolicited response) event. The initial probing, and all updates, are now routed through hdmi_present_sense. The stored PD and ELDV status is now always derived from GetPinSense verb execution, and not from the data in the unsolicited response. This means: a) The WAR for NVIDIA codec's UR.PD values ("old_pin_detect") can be removed, since this only affected the no-longer-used unsolicited response payload. b) In turn, this means that most NVIDIA codecs can simply use patch_generic_hdmi instead of having a custom variant just to set old_pin_detect. c) When PD && ELDV becomes true, no extra verbs are executed, because the GetPinSense that was previously executed by snd_hdmi_get_eld (really, hdmi_eld_valid) has simply moved into hdmi_present_sense. d) When PD && ELDV becomes false, there is a single extra GetPinSense verb executed for codecs where old_pin_detect wasn't set, i.e. some NVIDIA, and all ATI/AMD and Intel codecs. I doubt this will be a performance issue. The new unified code in hdmi_present_sense also ensures that eld->eld_valid is not set unless eld->monitor_present is also set. This protects against potential invalid combinations of PD and ELDV received from HW, and transitively from a graphics driver. Also, print the derived PD/ELDV bits from hdmi_present_sense so the kernel log always displays the actual state stored, which will differ from the values in the unsolicited response for NVIDIA HW where old_pin_detect was previously set. Finally, a couple of small tweaks originally by Takashi: * Clear the ELD content to zero before reading it, so that if it's not read (i.e. when !(PD && ELDV)) it's in a known state. * Don't show ELD fields in /proc ELD files when the ELD isn't valid. The only possibility I can see for regression here is a codec where the GetPinSense verb returns incorrect data. However, we're already exposed to that, since that data is used (a) from hdmi_add_pin to set up the initial pin state, and (b) within snd_hda_input_jack_report to query a pin's presence value. As such, I don't believe any HW has bugs here. Includes-changes-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-24 23:11:17 +00:00
if (eld->eld_valid) {
if (spec->ops.pin_get_eld(codec, pin_nid, eld->eld_buffer,
&eld->eld_size) < 0)
eld->eld_valid = false;
else {
memset(&eld->info, 0, sizeof(struct parsed_hdmi_eld));
if (snd_hdmi_parse_eld(&eld->info, eld->eld_buffer,
eld->eld_size) < 0)
eld->eld_valid = false;
}
if (eld->eld_valid) {
snd_hdmi_show_eld(&eld->info);
update_eld = true;
}
else if (repoll) {
queue_delayed_work(codec->bus->workq,
&per_pin->work,
msecs_to_jiffies(300));
goto unlock;
}
}
if (pin_eld->eld_valid && !eld->eld_valid) {
update_eld = true;
eld_changed = true;
}
if (update_eld) {
bool old_eld_valid = pin_eld->eld_valid;
pin_eld->eld_valid = eld->eld_valid;
eld_changed = pin_eld->eld_size != eld->eld_size ||
memcmp(pin_eld->eld_buffer, eld->eld_buffer,
eld->eld_size) != 0;
if (eld_changed)
memcpy(pin_eld->eld_buffer, eld->eld_buffer,
eld->eld_size);
pin_eld->eld_size = eld->eld_size;
pin_eld->info = eld->info;
/*
* Re-setup pin and infoframe. This is needed e.g. when
* - sink is first plugged-in (infoframe is not set up if !monitor_present)
* - transcoder can change during stream playback on Haswell
*/
if (eld->eld_valid && !old_eld_valid && per_pin->setup)
hdmi_setup_audio_infoframe(codec, per_pin,
per_pin->non_pcm);
}
if (eld_changed)
snd_ctl_notify(codec->bus->card,
SNDRV_CTL_EVENT_MASK_VALUE | SNDRV_CTL_EVENT_MASK_INFO,
&per_pin->eld_ctl->id);
unlock:
mutex_unlock(&per_pin->lock);
}
static void hdmi_repoll_eld(struct work_struct *work)
{
struct hdmi_spec_per_pin *per_pin =
container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work);
if (per_pin->repoll_count++ > 6)
per_pin->repoll_count = 0;
hdmi_present_sense(per_pin, per_pin->repoll_count);
}
static void intel_haswell_fixup_connect_list(struct hda_codec *codec,
hda_nid_t nid);
static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
{
struct hdmi_spec *spec = codec->spec;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
unsigned int caps, config;
int pin_idx;
struct hdmi_spec_per_pin *per_pin;
int err;
caps = snd_hda_query_pin_caps(codec, pin_nid);
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
if (!(caps & (AC_PINCAP_HDMI | AC_PINCAP_DP)))
return 0;
config = snd_hda_codec_get_pincfg(codec, pin_nid);
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
if (get_defcfg_connect(config) == AC_JACK_PORT_NONE)
return 0;
if (is_haswell(codec))
intel_haswell_fixup_connect_list(codec, pin_nid);
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
pin_idx = spec->num_pins;
per_pin = snd_array_new(&spec->pins);
if (!per_pin)
return -ENOMEM;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
per_pin->pin_nid = pin_nid;
per_pin->non_pcm = false;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
err = hdmi_read_pin_conn(codec, pin_idx);
if (err < 0)
return err;
spec->num_pins++;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
return 0;
}
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t cvt_nid)
{
struct hdmi_spec *spec = codec->spec;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
struct hdmi_spec_per_cvt *per_cvt;
unsigned int chans;
int err;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
chans = get_wcaps(codec, cvt_nid);
chans = get_wcaps_channels(chans);
per_cvt = snd_array_new(&spec->cvts);
if (!per_cvt)
return -ENOMEM;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
per_cvt->cvt_nid = cvt_nid;
per_cvt->channels_min = 2;
if (chans <= 16) {
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
per_cvt->channels_max = chans;
if (chans > spec->channels_max)
spec->channels_max = chans;
}
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
err = snd_hda_query_supported_pcm(codec, cvt_nid,
&per_cvt->rates,
&per_cvt->formats,
&per_cvt->maxbps);
if (err < 0)
return err;
if (spec->num_cvts < ARRAY_SIZE(spec->cvt_nids))
spec->cvt_nids[spec->num_cvts] = cvt_nid;
spec->num_cvts++;
return 0;
}
static int hdmi_parse_codec(struct hda_codec *codec)
{
hda_nid_t nid;
int i, nodes;
nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid);
if (!nid || nodes < 0) {
snd_printk(KERN_WARNING "HDMI: failed to get afg sub nodes\n");
return -EINVAL;
}
for (i = 0; i < nodes; i++, nid++) {
unsigned int caps;
unsigned int type;
caps = get_wcaps(codec, nid);
type = get_wcaps_type(caps);
if (!(caps & AC_WCAP_DIGITAL))
continue;
switch (type) {
case AC_WID_AUD_OUT:
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
hdmi_add_cvt(codec, nid);
break;
case AC_WID_PIN:
hdmi_add_pin(codec, nid);
break;
}
}
#ifdef CONFIG_PM
/* We're seeing some problems with unsolicited hot plug events on
* PantherPoint after S3, if this is not enabled */
if (codec->vendor_id == 0x80862806)
codec->bus->power_keep_link_on = 1;
/*
* G45/IbexPeak don't support EPSS: the unsolicited pin hot plug event
* can be lost and presence sense verb will become inaccurate if the
* HDA link is powered off at hot plug or hw initialization time.
*/
else if (!(snd_hda_param_read(codec, codec->afg, AC_PAR_POWER_STATE) &
AC_PWRST_EPSS))
codec->bus->power_keep_link_on = 1;
#endif
return 0;
}
/*
*/
static bool check_non_pcm_per_cvt(struct hda_codec *codec, hda_nid_t cvt_nid)
{
struct hda_spdif_out *spdif;
bool non_pcm;
mutex_lock(&codec->spdif_mutex);
spdif = snd_hda_spdif_out_of_nid(codec, cvt_nid);
non_pcm = !!(spdif->status & IEC958_AES0_NONAUDIO);
mutex_unlock(&codec->spdif_mutex);
return non_pcm;
}
/*
* HDMI callbacks
*/
static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
unsigned int stream_tag,
unsigned int format,
struct snd_pcm_substream *substream)
{
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
hda_nid_t cvt_nid = hinfo->nid;
struct hdmi_spec *spec = codec->spec;
int pin_idx = hinfo_to_pin_index(spec, hinfo);
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
hda_nid_t pin_nid = per_pin->pin_nid;
bool non_pcm;
non_pcm = check_non_pcm_per_cvt(codec, cvt_nid);
mutex_lock(&per_pin->lock);
per_pin->channels = substream->runtime->channels;
per_pin->setup = true;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
hdmi_setup_audio_infoframe(codec, per_pin, non_pcm);
mutex_unlock(&per_pin->lock);
return spec->ops.setup_stream(codec, cvt_nid, pin_nid, stream_tag, format);
}
static int generic_hdmi_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
struct snd_pcm_substream *substream)
{
snd_hda_codec_cleanup_stream(codec, hinfo->nid);
return 0;
}
static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
struct snd_pcm_substream *substream)
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
{
struct hdmi_spec *spec = codec->spec;
int cvt_idx, pin_idx;
struct hdmi_spec_per_cvt *per_cvt;
struct hdmi_spec_per_pin *per_pin;
if (hinfo->nid) {
cvt_idx = cvt_nid_to_cvt_index(spec, hinfo->nid);
if (snd_BUG_ON(cvt_idx < 0))
return -EINVAL;
per_cvt = get_cvt(spec, cvt_idx);
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
snd_BUG_ON(!per_cvt->assigned);
per_cvt->assigned = 0;
hinfo->nid = 0;
pin_idx = hinfo_to_pin_index(spec, hinfo);
if (snd_BUG_ON(pin_idx < 0))
return -EINVAL;
per_pin = get_pin(spec, pin_idx);
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
snd_hda_spdif_ctls_unassign(codec, pin_idx);
mutex_lock(&per_pin->lock);
per_pin->chmap_set = false;
memset(per_pin->chmap, 0, sizeof(per_pin->chmap));
per_pin->setup = false;
per_pin->channels = 0;
mutex_unlock(&per_pin->lock);
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
}
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
return 0;
}
static const struct hda_pcm_ops generic_ops = {
.open = hdmi_pcm_open,
.close = hdmi_pcm_close,
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
.prepare = generic_hdmi_playback_pcm_prepare,
.cleanup = generic_hdmi_playback_pcm_cleanup,
};
/*
* ALSA API channel-map control callbacks
*/
static int hdmi_chmap_ctl_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol);
struct hda_codec *codec = info->private_data;
struct hdmi_spec *spec = codec->spec;
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = spec->channels_max;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = SNDRV_CHMAP_LAST;
return 0;
}
static int hdmi_chmap_cea_alloc_validate_get_type(struct cea_channel_speaker_allocation *cap,
int channels)
{
/* If the speaker allocation matches the channel count, it is OK.*/
if (cap->channels != channels)
return -1;
/* all channels are remappable freely */
return SNDRV_CTL_TLVT_CHMAP_VAR;
}
static void hdmi_cea_alloc_to_tlv_chmap(struct cea_channel_speaker_allocation *cap,
unsigned int *chmap, int channels)
{
int count = 0;
int c;
for (c = 7; c >= 0; c--) {
int spk = cap->speakers[c];
if (!spk)
continue;
chmap[count++] = spk_to_chmap(spk);
}
WARN_ON(count != channels);
}
static int hdmi_chmap_ctl_tlv(struct snd_kcontrol *kcontrol, int op_flag,
unsigned int size, unsigned int __user *tlv)
{
struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol);
struct hda_codec *codec = info->private_data;
struct hdmi_spec *spec = codec->spec;
unsigned int __user *dst;
int chs, count = 0;
if (size < 8)
return -ENOMEM;
if (put_user(SNDRV_CTL_TLVT_CONTAINER, tlv))
return -EFAULT;
size -= 8;
dst = tlv + 2;
for (chs = 2; chs <= spec->channels_max; chs++) {
int i;
struct cea_channel_speaker_allocation *cap;
cap = channel_allocations;
for (i = 0; i < ARRAY_SIZE(channel_allocations); i++, cap++) {
int chs_bytes = chs * 4;
int type = spec->ops.chmap_cea_alloc_validate_get_type(cap, chs);
unsigned int tlv_chmap[8];
if (type < 0)
continue;
if (size < 8)
return -ENOMEM;
if (put_user(type, dst) ||
put_user(chs_bytes, dst + 1))
return -EFAULT;
dst += 2;
size -= 8;
count += 8;
if (size < chs_bytes)
return -ENOMEM;
size -= chs_bytes;
count += chs_bytes;
spec->ops.cea_alloc_to_tlv_chmap(cap, tlv_chmap, chs);
if (copy_to_user(dst, tlv_chmap, chs_bytes))
return -EFAULT;
dst += chs;
}
}
if (put_user(count, tlv + 1))
return -EFAULT;
return 0;
}
static int hdmi_chmap_ctl_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol);
struct hda_codec *codec = info->private_data;
struct hdmi_spec *spec = codec->spec;
int pin_idx = kcontrol->private_value;
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
int i;
for (i = 0; i < ARRAY_SIZE(per_pin->chmap); i++)
ucontrol->value.integer.value[i] = per_pin->chmap[i];
return 0;
}
static int hdmi_chmap_ctl_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol);
struct hda_codec *codec = info->private_data;
struct hdmi_spec *spec = codec->spec;
int pin_idx = kcontrol->private_value;
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
unsigned int ctl_idx;
struct snd_pcm_substream *substream;
unsigned char chmap[8];
int i, err, ca, prepared = 0;
ctl_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
substream = snd_pcm_chmap_substream(info, ctl_idx);
if (!substream || !substream->runtime)
return 0; /* just for avoiding error from alsactl restore */
switch (substream->runtime->status->state) {
case SNDRV_PCM_STATE_OPEN:
case SNDRV_PCM_STATE_SETUP:
break;
case SNDRV_PCM_STATE_PREPARED:
prepared = 1;
break;
default:
return -EBUSY;
}
memset(chmap, 0, sizeof(chmap));
for (i = 0; i < ARRAY_SIZE(chmap); i++)
chmap[i] = ucontrol->value.integer.value[i];
if (!memcmp(chmap, per_pin->chmap, sizeof(chmap)))
return 0;
ca = hdmi_manual_channel_allocation(ARRAY_SIZE(chmap), chmap);
if (ca < 0)
return -EINVAL;
if (spec->ops.chmap_validate) {
err = spec->ops.chmap_validate(ca, ARRAY_SIZE(chmap), chmap);
if (err)
return err;
}
mutex_lock(&per_pin->lock);
per_pin->chmap_set = true;
memcpy(per_pin->chmap, chmap, sizeof(chmap));
if (prepared)
hdmi_setup_audio_infoframe(codec, per_pin, per_pin->non_pcm);
mutex_unlock(&per_pin->lock);
return 0;
}
static int generic_hdmi_build_pcms(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
int pin_idx;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
struct hda_pcm *info;
struct hda_pcm_stream *pstr;
struct hdmi_spec_per_pin *per_pin;
per_pin = get_pin(spec, pin_idx);
sprintf(per_pin->pcm_name, "HDMI %d", pin_idx);
info = snd_array_new(&spec->pcm_rec);
if (!info)
return -ENOMEM;
info->name = per_pin->pcm_name;
info->pcm_type = HDA_PCM_TYPE_HDMI;
info->own_chmap = true;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
pstr = &info->stream[SNDRV_PCM_STREAM_PLAYBACK];
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
pstr->substreams = 1;
pstr->ops = generic_ops;
/* other pstr fields are set in open */
}
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
codec->num_pcms = spec->num_pins;
codec->pcm_info = spec->pcm_rec.list;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
return 0;
}
static int generic_hdmi_build_jack(struct hda_codec *codec, int pin_idx)
{
char hdmi_str[32] = "HDMI/DP";
struct hdmi_spec *spec = codec->spec;
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
int pcmdev = get_pcm_rec(spec, pin_idx)->device;
if (pcmdev > 0)
sprintf(hdmi_str + strlen(hdmi_str), ",pcm=%d", pcmdev);
if (!is_jack_detectable(codec, per_pin->pin_nid))
strncat(hdmi_str, " Phantom",
sizeof(hdmi_str) - strlen(hdmi_str) - 1);
return snd_hda_jack_add_kctl(codec, per_pin->pin_nid, hdmi_str, 0);
}
static int generic_hdmi_build_controls(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
int err;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
int pin_idx;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
err = generic_hdmi_build_jack(codec, pin_idx);
if (err < 0)
return err;
err = snd_hda_create_dig_out_ctls(codec,
per_pin->pin_nid,
per_pin->mux_nids[0],
HDA_PCM_TYPE_HDMI);
if (err < 0)
return err;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
snd_hda_spdif_ctls_unassign(codec, pin_idx);
/* add control for ELD Bytes */
err = hdmi_create_eld_ctl(codec, pin_idx,
get_pcm_rec(spec, pin_idx)->device);
if (err < 0)
return err;
hdmi_present_sense(per_pin, 0);
}
/* add channel maps */
for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
struct snd_pcm_chmap *chmap;
struct snd_kcontrol *kctl;
int i;
if (!codec->pcm_info[pin_idx].pcm)
break;
err = snd_pcm_add_chmap_ctls(codec->pcm_info[pin_idx].pcm,
SNDRV_PCM_STREAM_PLAYBACK,
NULL, 0, pin_idx, &chmap);
if (err < 0)
return err;
/* override handlers */
chmap->private_data = codec;
kctl = chmap->kctl;
for (i = 0; i < kctl->count; i++)
kctl->vd[i].access |= SNDRV_CTL_ELEM_ACCESS_WRITE;
kctl->info = hdmi_chmap_ctl_info;
kctl->get = hdmi_chmap_ctl_get;
kctl->put = hdmi_chmap_ctl_put;
kctl->tlv.c = hdmi_chmap_ctl_tlv;
}
return 0;
}
static int generic_hdmi_init_per_pins(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
int pin_idx;
for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
per_pin->codec = codec;
mutex_init(&per_pin->lock);
INIT_DELAYED_WORK(&per_pin->work, hdmi_repoll_eld);
eld_proc_new(per_pin, pin_idx);
}
return 0;
}
static int generic_hdmi_init(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
int pin_idx;
for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
hda_nid_t pin_nid = per_pin->pin_nid;
hdmi_init_pin(codec, pin_nid);
snd_hda_jack_detect_enable(codec, pin_nid, pin_nid);
}
return 0;
}
static void hdmi_array_init(struct hdmi_spec *spec, int nums)
{
snd_array_init(&spec->pins, sizeof(struct hdmi_spec_per_pin), nums);
snd_array_init(&spec->cvts, sizeof(struct hdmi_spec_per_cvt), nums);
snd_array_init(&spec->pcm_rec, sizeof(struct hda_pcm), nums);
}
static void hdmi_array_free(struct hdmi_spec *spec)
{
snd_array_free(&spec->pins);
snd_array_free(&spec->cvts);
snd_array_free(&spec->pcm_rec);
}
static void generic_hdmi_free(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
int pin_idx;
for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
cancel_delayed_work(&per_pin->work);
eld_proc_free(per_pin);
ALSA: hda: HDMI: Support codecs with fewer cvts than pins The general concept of this change is to create a PCM device for each pin widget instead of each converter widget. Whenever a PCM is opened, a converter is dynamically selected to drive that pin based on those available for muxing into the pin. The one thing this model doesn't support is a single PCM/converter sending audio to multiple pin widgets at once. Note that this means that a struct hda_pcm_stream's nid variable is set to 0 except between a stream's open and cleanup calls. The dynamic de-assignment of converters to PCMs occurs within cleanup, not close, in order for it to co-incide with when controller stream IDs are cleaned up from converters. While the PCM for a pin is not open, the pin is disabled (its widget control's PIN_OUT bit is cleared) so that if the currently routed converter is used to drive a different PCM/pin, that audio does not leak out over a disabled pin. We use the recently added SPDIF virtualization feature in order to create SPDIF controls for each pin widget instead of each converter widget, so that state is specific to a PCM. In order to support this, a number of more mechanical changes are made: * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it clear exactly what the code is dealing with. * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant data. In particular, we store a converter's capabilities in the per_cvt entry, rather than relying on a combination of codec_pcm_pars and the struct hda_pcm_stream. * ELD-related workarounds were removed from hdmi_channel_allocation into hdmi_instrinsic in order to simplifiy infoframe calculations and remove HW dependencies. * Various functions only apply to a single pin, since there is now only 1 pin per PCM. For example, hdmi_setup_infoframe, hdmi_setup_stream. * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing and data retrieval, rather than determining which pins/converters are to be used for creating PCMs. This is quite a large change; it may be appropriate to simply read the result of the patch rather than the diffs. Some small parts of the change might be separable into different patches, but I think the bulk of the change will probably always be one large patch. Hopefully the change isn't too opaque! This has been tested on: * NVIDIA GeForce 400 series discrete graphics card. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 520 discrete graphics card. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM audio to a PC monitor that supports audio. * NVIDIA GeForce 400 series laptop graphics chip. This model has the classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM, multi-channel PCM, and AC3 pass-through to an AV receiver. * Intel Ibex Peak laptop. This model is the new 1 codec n converters m pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass- through to an AV receiver. Note that I'm not familiar at all with AC3 pass-through. Hence, I may not have covered all possible mechanisms that are applicable here. I do know that my receiver definitely received AC3, not decoded PCM. I tested with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a WAV file that I believe has AC3 content rather than PCM. I also tested: * Play a stream * Mute while playing * Stop stream * Play some other streams to re-assign the converter to a different pin, PCM, set of SPDIF controls, ... hence hopefully triggering cleanup for the original PCM. * Unmute original stream while not playing * Play a stream on the original pin/PCM. This was to test SPDIF control virtualization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-01 17:14:21 +00:00
}
flush_workqueue(codec->bus->workq);
hdmi_array_free(spec);
kfree(spec);
}
#ifdef CONFIG_PM
static int generic_hdmi_resume(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
int pin_idx;
generic_hdmi_init(codec);
snd_hda_codec_resume_amp(codec);
snd_hda_codec_resume_cache(codec);
for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
hdmi_present_sense(per_pin, 1);
}
return 0;
}
#endif
static const struct hda_codec_ops generic_hdmi_patch_ops = {
.init = generic_hdmi_init,
.free = generic_hdmi_free,
.build_pcms = generic_hdmi_build_pcms,
.build_controls = generic_hdmi_build_controls,
.unsol_event = hdmi_unsol_event,
#ifdef CONFIG_PM
.resume = generic_hdmi_resume,
#endif
};
static const struct hdmi_ops generic_standard_hdmi_ops = {
.pin_get_eld = snd_hdmi_get_eld,
.pin_get_slot_channel = hdmi_pin_get_slot_channel,
.pin_set_slot_channel = hdmi_pin_set_slot_channel,
.pin_setup_infoframe = hdmi_pin_setup_infoframe,
.pin_hbr_setup = hdmi_pin_hbr_setup,
.setup_stream = hdmi_setup_stream,
.chmap_cea_alloc_validate_get_type = hdmi_chmap_cea_alloc_validate_get_type,
.cea_alloc_to_tlv_chmap = hdmi_cea_alloc_to_tlv_chmap,
};
static void intel_haswell_fixup_connect_list(struct hda_codec *codec,
hda_nid_t nid)
{
struct hdmi_spec *spec = codec->spec;
hda_nid_t conns[4];
int nconns;
nconns = snd_hda_get_connections(codec, nid, conns, ARRAY_SIZE(conns));
if (nconns == spec->num_cvts &&
!memcmp(conns, spec->cvt_nids, spec->num_cvts * sizeof(hda_nid_t)))
return;
/* override pins connection list */
snd_printdd("hdmi: haswell: override pin connection 0x%x\n", nid);
snd_hda_override_conn_list(codec, nid, spec->num_cvts, spec->cvt_nids);
}
#define INTEL_VENDOR_NID 0x08
#define INTEL_GET_VENDOR_VERB 0xf81
#define INTEL_SET_VENDOR_VERB 0x781
#define INTEL_EN_DP12 0x02 /* enable DP 1.2 features */
#define INTEL_EN_ALL_PIN_CVTS 0x01 /* enable 2nd & 3rd pins and convertors */
static void intel_haswell_enable_all_pins(struct hda_codec *codec,
bool update_tree)
{
unsigned int vendor_param;
vendor_param = snd_hda_codec_read(codec, INTEL_VENDOR_NID, 0,
INTEL_GET_VENDOR_VERB, 0);
if (vendor_param == -1 || vendor_param & INTEL_EN_ALL_PIN_CVTS)
return;
vendor_param |= INTEL_EN_ALL_PIN_CVTS;
vendor_param = snd_hda_codec_read(codec, INTEL_VENDOR_NID, 0,
INTEL_SET_VENDOR_VERB, vendor_param);
if (vendor_param == -1)
return;
if (update_tree)
snd_hda_codec_update_widgets(codec);
}
static void intel_haswell_fixup_enable_dp12(struct hda_codec *codec)
{
unsigned int vendor_param;
vendor_param = snd_hda_codec_read(codec, INTEL_VENDOR_NID, 0,
INTEL_GET_VENDOR_VERB, 0);
if (vendor_param == -1 || vendor_param & INTEL_EN_DP12)
return;
/* enable DP1.2 mode */
vendor_param |= INTEL_EN_DP12;
snd_hda_codec_write_cache(codec, INTEL_VENDOR_NID, 0,
INTEL_SET_VENDOR_VERB, vendor_param);
}
/* Haswell needs to re-issue the vendor-specific verbs before turning to D0.
* Otherwise you may get severe h/w communication errors.
*/
static void haswell_set_power_state(struct hda_codec *codec, hda_nid_t fg,
unsigned int power_state)
{
if (power_state == AC_PWRST_D0) {
intel_haswell_enable_all_pins(codec, false);
intel_haswell_fixup_enable_dp12(codec);
}
snd_hda_codec_read(codec, fg, 0, AC_VERB_SET_POWER_STATE, power_state);
snd_hda_codec_set_power_to_all(codec, fg, power_state);
}
static int patch_generic_hdmi(struct hda_codec *codec)
{
struct hdmi_spec *spec;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
return -ENOMEM;
spec->ops = generic_standard_hdmi_ops;
codec->spec = spec;
hdmi_array_init(spec, 4);
if (is_haswell(codec)) {
intel_haswell_enable_all_pins(codec, true);
intel_haswell_fixup_enable_dp12(codec);
}
if (hdmi_parse_codec(codec) < 0) {
codec->spec = NULL;
kfree(spec);
return -EINVAL;
}
codec->patch_ops = generic_hdmi_patch_ops;
if (is_haswell(codec)) {
codec->patch_ops.set_power_state = haswell_set_power_state;
codec->dp_mst = true;
}
generic_hdmi_init_per_pins(codec);
init_channel_allocations();
return 0;
}
/*
* Shared non-generic implementations
*/
static int simple_playback_build_pcms(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
struct hda_pcm *info;
unsigned int chans;
struct hda_pcm_stream *pstr;
struct hdmi_spec_per_cvt *per_cvt;
per_cvt = get_cvt(spec, 0);
chans = get_wcaps(codec, per_cvt->cvt_nid);
chans = get_wcaps_channels(chans);
info = snd_array_new(&spec->pcm_rec);
if (!info)
return -ENOMEM;
info->name = get_pin(spec, 0)->pcm_name;
sprintf(info->name, "HDMI 0");
info->pcm_type = HDA_PCM_TYPE_HDMI;
pstr = &info->stream[SNDRV_PCM_STREAM_PLAYBACK];
*pstr = spec->pcm_playback;
pstr->nid = per_cvt->cvt_nid;
if (pstr->channels_max <= 2 && chans && chans <= 16)
pstr->channels_max = chans;
codec->num_pcms = 1;
codec->pcm_info = info;
return 0;
}
/* unsolicited event for jack sensing */
static void simple_hdmi_unsol_event(struct hda_codec *codec,
unsigned int res)
{
snd_hda_jack_set_dirty_all(codec);
snd_hda_jack_report_sync(codec);
}
/* generic_hdmi_build_jack can be used for simple_hdmi, too,
* as long as spec->pins[] is set correctly
*/
#define simple_hdmi_build_jack generic_hdmi_build_jack
static int simple_playback_build_controls(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
struct hdmi_spec_per_cvt *per_cvt;
int err;
per_cvt = get_cvt(spec, 0);
err = snd_hda_create_spdif_out_ctls(codec, per_cvt->cvt_nid,
per_cvt->cvt_nid);
if (err < 0)
return err;
return simple_hdmi_build_jack(codec, 0);
}
static int simple_playback_init(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
struct hdmi_spec_per_pin *per_pin = get_pin(spec, 0);
hda_nid_t pin = per_pin->pin_nid;
snd_hda_codec_write(codec, pin, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
/* some codecs require to unmute the pin */
if (get_wcaps(codec, pin) & AC_WCAP_OUT_AMP)
snd_hda_codec_write(codec, pin, 0, AC_VERB_SET_AMP_GAIN_MUTE,
AMP_OUT_UNMUTE);
snd_hda_jack_detect_enable(codec, pin, pin);
return 0;
}
static void simple_playback_free(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
hdmi_array_free(spec);
kfree(spec);
}
/*
* Nvidia specific implementations
*/
#define Nv_VERB_SET_Channel_Allocation 0xF79
#define Nv_VERB_SET_Info_Frame_Checksum 0xF7A
#define Nv_VERB_SET_Audio_Protection_On 0xF98
#define Nv_VERB_SET_Audio_Protection_Off 0xF99
#define nvhdmi_master_con_nid_7x 0x04
#define nvhdmi_master_pin_nid_7x 0x05
static const hda_nid_t nvhdmi_con_nids_7x[4] = {
/*front, rear, clfe, rear_surr */
0x6, 0x8, 0xa, 0xc,
};
static const struct hda_verb nvhdmi_basic_init_7x_2ch[] = {
/* set audio protect on */
{ 0x1, Nv_VERB_SET_Audio_Protection_On, 0x1},
/* enable digital output on pin widget */
{ 0x5, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
{} /* terminator */
};
static const struct hda_verb nvhdmi_basic_init_7x_8ch[] = {
/* set audio protect on */
{ 0x1, Nv_VERB_SET_Audio_Protection_On, 0x1},
/* enable digital output on pin widget */
{ 0x5, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
{ 0x7, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
{ 0x9, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
{ 0xb, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
{ 0xd, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
{} /* terminator */
};
#ifdef LIMITED_RATE_FMT_SUPPORT
/* support only the safe format and rate */
#define SUPPORTED_RATES SNDRV_PCM_RATE_48000
#define SUPPORTED_MAXBPS 16
#define SUPPORTED_FORMATS SNDRV_PCM_FMTBIT_S16_LE
#else
/* support all rates and formats */
#define SUPPORTED_RATES \
(SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |\
SNDRV_PCM_RATE_192000)
#define SUPPORTED_MAXBPS 24
#define SUPPORTED_FORMATS \
(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
#endif
static int nvhdmi_7x_init_2ch(struct hda_codec *codec)
{
snd_hda_sequence_write(codec, nvhdmi_basic_init_7x_2ch);
return 0;
}
static int nvhdmi_7x_init_8ch(struct hda_codec *codec)
{
snd_hda_sequence_write(codec, nvhdmi_basic_init_7x_8ch);
return 0;
}
static unsigned int channels_2_6_8[] = {
2, 6, 8
};
static unsigned int channels_2_8[] = {
2, 8
};
static struct snd_pcm_hw_constraint_list hw_constraints_2_6_8_channels = {
.count = ARRAY_SIZE(channels_2_6_8),
.list = channels_2_6_8,
.mask = 0,
};
static struct snd_pcm_hw_constraint_list hw_constraints_2_8_channels = {
.count = ARRAY_SIZE(channels_2_8),
.list = channels_2_8,
.mask = 0,
};
static int simple_playback_pcm_open(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
struct snd_pcm_substream *substream)
{
struct hdmi_spec *spec = codec->spec;
struct snd_pcm_hw_constraint_list *hw_constraints_channels = NULL;
switch (codec->preset->id) {
case 0x10de0002:
case 0x10de0003:
case 0x10de0005:
case 0x10de0006:
hw_constraints_channels = &hw_constraints_2_8_channels;
break;
case 0x10de0007:
hw_constraints_channels = &hw_constraints_2_6_8_channels;
break;
default:
break;
}
if (hw_constraints_channels != NULL) {
snd_pcm_hw_constraint_list(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_CHANNELS,
hw_constraints_channels);
} else {
snd_pcm_hw_constraint_step(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_CHANNELS, 2);
}
return snd_hda_multi_out_dig_open(codec, &spec->multiout);
}
static int simple_playback_pcm_close(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
struct snd_pcm_substream *substream)
{
struct hdmi_spec *spec = codec->spec;
return snd_hda_multi_out_dig_close(codec, &spec->multiout);
}
static int simple_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
unsigned int stream_tag,
unsigned int format,
struct snd_pcm_substream *substream)
{
struct hdmi_spec *spec = codec->spec;
return snd_hda_multi_out_dig_prepare(codec, &spec->multiout,
stream_tag, format, substream);
}
static const struct hda_pcm_stream simple_pcm_playback = {
.substreams = 1,
.channels_min = 2,
.channels_max = 2,
.ops = {
.open = simple_playback_pcm_open,
.close = simple_playback_pcm_close,
.prepare = simple_playback_pcm_prepare
},
};
static const struct hda_codec_ops simple_hdmi_patch_ops = {
.build_controls = simple_playback_build_controls,
.build_pcms = simple_playback_build_pcms,
.init = simple_playback_init,
.free = simple_playback_free,
.unsol_event = simple_hdmi_unsol_event,
};
static int patch_simple_hdmi(struct hda_codec *codec,
hda_nid_t cvt_nid, hda_nid_t pin_nid)
{
struct hdmi_spec *spec;
struct hdmi_spec_per_cvt *per_cvt;
struct hdmi_spec_per_pin *per_pin;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (!spec)
return -ENOMEM;
codec->spec = spec;
hdmi_array_init(spec, 1);
spec->multiout.num_dacs = 0; /* no analog */
spec->multiout.max_channels = 2;
spec->multiout.dig_out_nid = cvt_nid;
spec->num_cvts = 1;
spec->num_pins = 1;
per_pin = snd_array_new(&spec->pins);
per_cvt = snd_array_new(&spec->cvts);
if (!per_pin || !per_cvt) {
simple_playback_free(codec);
return -ENOMEM;
}
per_cvt->cvt_nid = cvt_nid;
per_pin->pin_nid = pin_nid;
spec->pcm_playback = simple_pcm_playback;
codec->patch_ops = simple_hdmi_patch_ops;
return 0;
}
static void nvhdmi_8ch_7x_set_info_frame_parameters(struct hda_codec *codec,
int channels)
{
unsigned int chanmask;
int chan = channels ? (channels - 1) : 1;
switch (channels) {
default:
case 0:
case 2:
chanmask = 0x00;
break;
case 4:
chanmask = 0x08;
break;
case 6:
chanmask = 0x0b;
break;
case 8:
chanmask = 0x13;
break;
}
/* Set the audio infoframe channel allocation and checksum fields. The
* channel count is computed implicitly by the hardware. */
snd_hda_codec_write(codec, 0x1, 0,
Nv_VERB_SET_Channel_Allocation, chanmask);
snd_hda_codec_write(codec, 0x1, 0,
Nv_VERB_SET_Info_Frame_Checksum,
(0x71 - chan - chanmask));
}
static int nvhdmi_8ch_7x_pcm_close(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
struct snd_pcm_substream *substream)
{
struct hdmi_spec *spec = codec->spec;
int i;
snd_hda_codec_write(codec, nvhdmi_master_con_nid_7x,
0, AC_VERB_SET_CHANNEL_STREAMID, 0);
for (i = 0; i < 4; i++) {
/* set the stream id */
snd_hda_codec_write(codec, nvhdmi_con_nids_7x[i], 0,
AC_VERB_SET_CHANNEL_STREAMID, 0);
/* set the stream format */
snd_hda_codec_write(codec, nvhdmi_con_nids_7x[i], 0,
AC_VERB_SET_STREAM_FORMAT, 0);
}
/* The audio hardware sends a channel count of 0x7 (8ch) when all the
* streams are disabled. */
nvhdmi_8ch_7x_set_info_frame_parameters(codec, 8);
return snd_hda_multi_out_dig_close(codec, &spec->multiout);
}
static int nvhdmi_8ch_7x_pcm_prepare(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
unsigned int stream_tag,
unsigned int format,
struct snd_pcm_substream *substream)
{
int chs;
unsigned int dataDCC2, channel_id;
int i;
struct hdmi_spec *spec = codec->spec;
struct hda_spdif_out *spdif;
struct hdmi_spec_per_cvt *per_cvt;
mutex_lock(&codec->spdif_mutex);
per_cvt = get_cvt(spec, 0);
spdif = snd_hda_spdif_out_of_nid(codec, per_cvt->cvt_nid);
chs = substream->runtime->channels;
dataDCC2 = 0x2;
/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
if (codec->spdif_status_reset && (spdif->ctls & AC_DIG1_ENABLE))
snd_hda_codec_write(codec,
nvhdmi_master_con_nid_7x,
0,
AC_VERB_SET_DIGI_CONVERT_1,
spdif->ctls & ~AC_DIG1_ENABLE & 0xff);
/* set the stream id */
snd_hda_codec_write(codec, nvhdmi_master_con_nid_7x, 0,
AC_VERB_SET_CHANNEL_STREAMID, (stream_tag << 4) | 0x0);
/* set the stream format */
snd_hda_codec_write(codec, nvhdmi_master_con_nid_7x, 0,
AC_VERB_SET_STREAM_FORMAT, format);
/* turn on again (if needed) */
/* enable and set the channel status audio/data flag */
if (codec->spdif_status_reset && (spdif->ctls & AC_DIG1_ENABLE)) {
snd_hda_codec_write(codec,
nvhdmi_master_con_nid_7x,
0,
AC_VERB_SET_DIGI_CONVERT_1,
spdif->ctls & 0xff);
snd_hda_codec_write(codec,
nvhdmi_master_con_nid_7x,
0,
AC_VERB_SET_DIGI_CONVERT_2, dataDCC2);
}
for (i = 0; i < 4; i++) {
if (chs == 2)
channel_id = 0;
else
channel_id = i * 2;
/* turn off SPDIF once;
*otherwise the IEC958 bits won't be updated
*/
if (codec->spdif_status_reset &&
(spdif->ctls & AC_DIG1_ENABLE))
snd_hda_codec_write(codec,
nvhdmi_con_nids_7x[i],
0,
AC_VERB_SET_DIGI_CONVERT_1,
spdif->ctls & ~AC_DIG1_ENABLE & 0xff);
/* set the stream id */
snd_hda_codec_write(codec,
nvhdmi_con_nids_7x[i],
0,
AC_VERB_SET_CHANNEL_STREAMID,
(stream_tag << 4) | channel_id);
/* set the stream format */
snd_hda_codec_write(codec,
nvhdmi_con_nids_7x[i],
0,
AC_VERB_SET_STREAM_FORMAT,
format);
/* turn on again (if needed) */
/* enable and set the channel status audio/data flag */
if (codec->spdif_status_reset &&
(spdif->ctls & AC_DIG1_ENABLE)) {
snd_hda_codec_write(codec,
nvhdmi_con_nids_7x[i],
0,
AC_VERB_SET_DIGI_CONVERT_1,
spdif->ctls & 0xff);
snd_hda_codec_write(codec,
nvhdmi_con_nids_7x[i],
0,
AC_VERB_SET_DIGI_CONVERT_2, dataDCC2);
}
}
nvhdmi_8ch_7x_set_info_frame_parameters(codec, chs);
mutex_unlock(&codec->spdif_mutex);
return 0;
}
static const struct hda_pcm_stream nvhdmi_pcm_playback_8ch_7x = {
.substreams = 1,
.channels_min = 2,
.channels_max = 8,
.nid = nvhdmi_master_con_nid_7x,
.rates = SUPPORTED_RATES,
.maxbps = SUPPORTED_MAXBPS,
.formats = SUPPORTED_FORMATS,
.ops = {
.open = simple_playback_pcm_open,
.close = nvhdmi_8ch_7x_pcm_close,
.prepare = nvhdmi_8ch_7x_pcm_prepare
},
};
static int patch_nvhdmi_2ch(struct hda_codec *codec)
{
struct hdmi_spec *spec;
int err = patch_simple_hdmi(codec, nvhdmi_master_con_nid_7x,
nvhdmi_master_pin_nid_7x);
if (err < 0)
return err;
codec->patch_ops.init = nvhdmi_7x_init_2ch;
/* override the PCM rates, etc, as the codec doesn't give full list */
spec = codec->spec;
spec->pcm_playback.rates = SUPPORTED_RATES;
spec->pcm_playback.maxbps = SUPPORTED_MAXBPS;
spec->pcm_playback.formats = SUPPORTED_FORMATS;
return 0;
}
static int nvhdmi_7x_8ch_build_pcms(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
int err = simple_playback_build_pcms(codec);
if (!err) {
struct hda_pcm *info = get_pcm_rec(spec, 0);
info->own_chmap = true;
}
return err;
}
static int nvhdmi_7x_8ch_build_controls(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
struct hda_pcm *info;
struct snd_pcm_chmap *chmap;
int err;
err = simple_playback_build_controls(codec);
if (err < 0)
return err;
/* add channel maps */
info = get_pcm_rec(spec, 0);
err = snd_pcm_add_chmap_ctls(info->pcm,
SNDRV_PCM_STREAM_PLAYBACK,
snd_pcm_alt_chmaps, 8, 0, &chmap);
if (err < 0)
return err;
switch (codec->preset->id) {
case 0x10de0002:
case 0x10de0003:
case 0x10de0005:
case 0x10de0006:
chmap->channel_mask = (1U << 2) | (1U << 8);
break;
case 0x10de0007:
chmap->channel_mask = (1U << 2) | (1U << 6) | (1U << 8);
}
return 0;
}
static int patch_nvhdmi_8ch_7x(struct hda_codec *codec)
{
struct hdmi_spec *spec;
int err = patch_nvhdmi_2ch(codec);
if (err < 0)
return err;
spec = codec->spec;
spec->multiout.max_channels = 8;
spec->pcm_playback = nvhdmi_pcm_playback_8ch_7x;
codec->patch_ops.init = nvhdmi_7x_init_8ch;
codec->patch_ops.build_pcms = nvhdmi_7x_8ch_build_pcms;
codec->patch_ops.build_controls = nvhdmi_7x_8ch_build_controls;
/* Initialize the audio infoframe channel mask and checksum to something
* valid */
nvhdmi_8ch_7x_set_info_frame_parameters(codec, 8);
return 0;
}
/*
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
* ATI/AMD-specific implementations
*/
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
#define is_amdhdmi_rev3_or_later(codec) \
((codec)->vendor_id == 0x1002aa01 && ((codec)->revision_id & 0xff00) >= 0x0300)
#define has_amd_full_remap_support(codec) is_amdhdmi_rev3_or_later(codec)
/* ATI/AMD specific HDA pin verbs, see the AMD HDA Verbs specification */
#define ATI_VERB_SET_CHANNEL_ALLOCATION 0x771
#define ATI_VERB_SET_DOWNMIX_INFO 0x772
#define ATI_VERB_SET_MULTICHANNEL_01 0x777
#define ATI_VERB_SET_MULTICHANNEL_23 0x778
#define ATI_VERB_SET_MULTICHANNEL_45 0x779
#define ATI_VERB_SET_MULTICHANNEL_67 0x77a
#define ATI_VERB_SET_HBR_CONTROL 0x77c
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
#define ATI_VERB_SET_MULTICHANNEL_1 0x785
#define ATI_VERB_SET_MULTICHANNEL_3 0x786
#define ATI_VERB_SET_MULTICHANNEL_5 0x787
#define ATI_VERB_SET_MULTICHANNEL_7 0x788
#define ATI_VERB_SET_MULTICHANNEL_MODE 0x789
#define ATI_VERB_GET_CHANNEL_ALLOCATION 0xf71
#define ATI_VERB_GET_DOWNMIX_INFO 0xf72
#define ATI_VERB_GET_MULTICHANNEL_01 0xf77
#define ATI_VERB_GET_MULTICHANNEL_23 0xf78
#define ATI_VERB_GET_MULTICHANNEL_45 0xf79
#define ATI_VERB_GET_MULTICHANNEL_67 0xf7a
#define ATI_VERB_GET_HBR_CONTROL 0xf7c
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
#define ATI_VERB_GET_MULTICHANNEL_1 0xf85
#define ATI_VERB_GET_MULTICHANNEL_3 0xf86
#define ATI_VERB_GET_MULTICHANNEL_5 0xf87
#define ATI_VERB_GET_MULTICHANNEL_7 0xf88
#define ATI_VERB_GET_MULTICHANNEL_MODE 0xf89
/* AMD specific HDA cvt verbs */
#define ATI_VERB_SET_RAMP_RATE 0x770
#define ATI_VERB_GET_RAMP_RATE 0xf70
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
#define ATI_OUT_ENABLE 0x1
#define ATI_MULTICHANNEL_MODE_PAIRED 0
#define ATI_MULTICHANNEL_MODE_SINGLE 1
#define ATI_HBR_CAPABLE 0x01
#define ATI_HBR_ENABLE 0x10
static int atihdmi_pin_get_eld(struct hda_codec *codec, hda_nid_t nid,
unsigned char *buf, int *eld_size)
{
/* call hda_eld.c ATI/AMD-specific function */
return snd_hdmi_get_eld_ati(codec, nid, buf, eld_size,
is_amdhdmi_rev3_or_later(codec));
}
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
static void atihdmi_pin_setup_infoframe(struct hda_codec *codec, hda_nid_t pin_nid, int ca,
int active_channels, int conn_type)
{
snd_hda_codec_write(codec, pin_nid, 0, ATI_VERB_SET_CHANNEL_ALLOCATION, ca);
}
static int atihdmi_paired_swap_fc_lfe(int pos)
{
/*
* ATI/AMD have automatic FC/LFE swap built-in
* when in pairwise mapping mode.
*/
switch (pos) {
/* see channel_allocations[].speakers[] */
case 2: return 3;
case 3: return 2;
default: break;
}
return pos;
}
static int atihdmi_paired_chmap_validate(int ca, int chs, unsigned char *map)
{
struct cea_channel_speaker_allocation *cap;
int i, j;
/* check that only channel pairs need to be remapped on old pre-rev3 ATI/AMD */
cap = &channel_allocations[get_channel_allocation_order(ca)];
for (i = 0; i < chs; ++i) {
int mask = to_spk_mask(map[i]);
bool ok = false;
bool companion_ok = false;
if (!mask)
continue;
for (j = 0 + i % 2; j < 8; j += 2) {
int chan_idx = 7 - atihdmi_paired_swap_fc_lfe(j);
if (cap->speakers[chan_idx] == mask) {
/* channel is in a supported position */
ok = true;
if (i % 2 == 0 && i + 1 < chs) {
/* even channel, check the odd companion */
int comp_chan_idx = 7 - atihdmi_paired_swap_fc_lfe(j + 1);
int comp_mask_req = to_spk_mask(map[i+1]);
int comp_mask_act = cap->speakers[comp_chan_idx];
if (comp_mask_req == comp_mask_act)
companion_ok = true;
else
return -EINVAL;
}
break;
}
}
if (!ok)
return -EINVAL;
if (companion_ok)
i++; /* companion channel already checked */
}
return 0;
}
static int atihdmi_pin_set_slot_channel(struct hda_codec *codec, hda_nid_t pin_nid,
int hdmi_slot, int stream_channel)
{
int verb;
int ati_channel_setup = 0;
if (hdmi_slot > 7)
return -EINVAL;
if (!has_amd_full_remap_support(codec)) {
hdmi_slot = atihdmi_paired_swap_fc_lfe(hdmi_slot);
/* In case this is an odd slot but without stream channel, do not
* disable the slot since the corresponding even slot could have a
* channel. In case neither have a channel, the slot pair will be
* disabled when this function is called for the even slot. */
if (hdmi_slot % 2 != 0 && stream_channel == 0xf)
return 0;
hdmi_slot -= hdmi_slot % 2;
if (stream_channel != 0xf)
stream_channel -= stream_channel % 2;
}
verb = ATI_VERB_SET_MULTICHANNEL_01 + hdmi_slot/2 + (hdmi_slot % 2) * 0x00e;
/* ati_channel_setup format: [7..4] = stream_channel_id, [1] = mute, [0] = enable */
if (stream_channel != 0xf)
ati_channel_setup = (stream_channel << 4) | ATI_OUT_ENABLE;
return snd_hda_codec_write(codec, pin_nid, 0, verb, ati_channel_setup);
}
static int atihdmi_pin_get_slot_channel(struct hda_codec *codec, hda_nid_t pin_nid,
int asp_slot)
{
bool was_odd = false;
int ati_asp_slot = asp_slot;
int verb;
int ati_channel_setup;
if (asp_slot > 7)
return -EINVAL;
if (!has_amd_full_remap_support(codec)) {
ati_asp_slot = atihdmi_paired_swap_fc_lfe(asp_slot);
if (ati_asp_slot % 2 != 0) {
ati_asp_slot -= 1;
was_odd = true;
}
}
verb = ATI_VERB_GET_MULTICHANNEL_01 + ati_asp_slot/2 + (ati_asp_slot % 2) * 0x00e;
ati_channel_setup = snd_hda_codec_read(codec, pin_nid, 0, verb, 0);
if (!(ati_channel_setup & ATI_OUT_ENABLE))
return 0xf;
return ((ati_channel_setup & 0xf0) >> 4) + !!was_odd;
}
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
static int atihdmi_paired_chmap_cea_alloc_validate_get_type(struct cea_channel_speaker_allocation *cap,
int channels)
{
int c;
/*
* Pre-rev3 ATI/AMD codecs operate in a paired channel mode, so
* we need to take that into account (a single channel may take 2
* channel slots if we need to carry a silent channel next to it).
* On Rev3+ AMD codecs this function is not used.
*/
int chanpairs = 0;
/* We only produce even-numbered channel count TLVs */
if ((channels % 2) != 0)
return -1;
for (c = 0; c < 7; c += 2) {
if (cap->speakers[c] || cap->speakers[c+1])
chanpairs++;
}
if (chanpairs * 2 != channels)
return -1;
return SNDRV_CTL_TLVT_CHMAP_PAIRED;
}
static void atihdmi_paired_cea_alloc_to_tlv_chmap(struct cea_channel_speaker_allocation *cap,
unsigned int *chmap, int channels)
{
/* produce paired maps for pre-rev3 ATI/AMD codecs */
int count = 0;
int c;
for (c = 7; c >= 0; c--) {
int chan = 7 - atihdmi_paired_swap_fc_lfe(7 - c);
int spk = cap->speakers[chan];
if (!spk) {
/* add N/A channel if the companion channel is occupied */
if (cap->speakers[chan + (chan % 2 ? -1 : 1)])
chmap[count++] = SNDRV_CHMAP_NA;
continue;
}
chmap[count++] = spk_to_chmap(spk);
}
WARN_ON(count != channels);
}
static int atihdmi_pin_hbr_setup(struct hda_codec *codec, hda_nid_t pin_nid,
bool hbr)
{
int hbr_ctl, hbr_ctl_new;
hbr_ctl = snd_hda_codec_read(codec, pin_nid, 0, ATI_VERB_GET_HBR_CONTROL, 0);
if (hbr_ctl & ATI_HBR_CAPABLE) {
if (hbr)
hbr_ctl_new = hbr_ctl | ATI_HBR_ENABLE;
else
hbr_ctl_new = hbr_ctl & ~ATI_HBR_ENABLE;
snd_printdd("atihdmi_pin_hbr_setup: "
"NID=0x%x, %shbr-ctl=0x%x\n",
pin_nid,
hbr_ctl == hbr_ctl_new ? "" : "new-",
hbr_ctl_new);
if (hbr_ctl != hbr_ctl_new)
snd_hda_codec_write(codec, pin_nid, 0,
ATI_VERB_SET_HBR_CONTROL,
hbr_ctl_new);
} else if (hbr)
return -EINVAL;
return 0;
}
static int atihdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid,
hda_nid_t pin_nid, u32 stream_tag, int format)
{
if (is_amdhdmi_rev3_or_later(codec)) {
int ramp_rate = 180; /* default as per AMD spec */
/* disable ramp-up/down for non-pcm as per AMD spec */
if (format & AC_FMT_TYPE_NON_PCM)
ramp_rate = 0;
snd_hda_codec_write(codec, cvt_nid, 0, ATI_VERB_SET_RAMP_RATE, ramp_rate);
}
return hdmi_setup_stream(codec, cvt_nid, pin_nid, stream_tag, format);
}
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
static int atihdmi_init(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
int pin_idx, err;
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
err = generic_hdmi_init(codec);
if (err)
return err;
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
/* make sure downmix information in infoframe is zero */
snd_hda_codec_write(codec, per_pin->pin_nid, 0, ATI_VERB_SET_DOWNMIX_INFO, 0);
/* enable channel-wise remap mode if supported */
if (has_amd_full_remap_support(codec))
snd_hda_codec_write(codec, per_pin->pin_nid, 0,
ATI_VERB_SET_MULTICHANNEL_MODE,
ATI_MULTICHANNEL_MODE_SINGLE);
}
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
return 0;
}
static int patch_atihdmi(struct hda_codec *codec)
{
struct hdmi_spec *spec;
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
struct hdmi_spec_per_cvt *per_cvt;
int err, cvt_idx;
err = patch_generic_hdmi(codec);
if (err)
return err;
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
codec->patch_ops.init = atihdmi_init;
spec = codec->spec;
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
spec->ops.pin_get_eld = atihdmi_pin_get_eld;
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
spec->ops.pin_get_slot_channel = atihdmi_pin_get_slot_channel;
spec->ops.pin_set_slot_channel = atihdmi_pin_set_slot_channel;
spec->ops.pin_setup_infoframe = atihdmi_pin_setup_infoframe;
spec->ops.pin_hbr_setup = atihdmi_pin_hbr_setup;
spec->ops.setup_stream = atihdmi_setup_stream;
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
if (!has_amd_full_remap_support(codec)) {
/* override to ATI/AMD-specific versions with pairwise mapping */
spec->ops.chmap_cea_alloc_validate_get_type =
atihdmi_paired_chmap_cea_alloc_validate_get_type;
spec->ops.cea_alloc_to_tlv_chmap = atihdmi_paired_cea_alloc_to_tlv_chmap;
spec->ops.chmap_validate = atihdmi_paired_chmap_validate;
}
/* ATI/AMD converters do not advertise all of their capabilities */
for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) {
per_cvt = get_cvt(spec, cvt_idx);
per_cvt->channels_max = max(per_cvt->channels_max, 8u);
per_cvt->rates |= SUPPORTED_RATES;
per_cvt->formats |= SUPPORTED_FORMATS;
per_cvt->maxbps = max(per_cvt->maxbps, 24u);
}
spec->channels_max = max(spec->channels_max, 8u);
return 0;
}
/* VIA HDMI Implementation */
#define VIAHDMI_CVT_NID 0x02 /* audio converter1 */
#define VIAHDMI_PIN_NID 0x03 /* HDMI output pin1 */
static int patch_via_hdmi(struct hda_codec *codec)
{
return patch_simple_hdmi(codec, VIAHDMI_CVT_NID, VIAHDMI_PIN_NID);
}
/*
* patch entries
*/
static const struct hda_codec_preset snd_hda_preset_hdmi[] = {
{ .id = 0x1002793c, .name = "RS600 HDMI", .patch = patch_atihdmi },
{ .id = 0x10027919, .name = "RS600 HDMI", .patch = patch_atihdmi },
{ .id = 0x1002791a, .name = "RS690/780 HDMI", .patch = patch_atihdmi },
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v2 Tested-by: Olivier Langlois <olivier@trillion01.com> # v2+rev3fix Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-24 18:10:35 +00:00
{ .id = 0x1002aa01, .name = "R6xx HDMI", .patch = patch_atihdmi },
{ .id = 0x10951390, .name = "SiI1390 HDMI", .patch = patch_generic_hdmi },
{ .id = 0x10951392, .name = "SiI1392 HDMI", .patch = patch_generic_hdmi },
{ .id = 0x17e80047, .name = "Chrontel HDMI", .patch = patch_generic_hdmi },
{ .id = 0x10de0002, .name = "MCP77/78 HDMI", .patch = patch_nvhdmi_8ch_7x },
{ .id = 0x10de0003, .name = "MCP77/78 HDMI", .patch = patch_nvhdmi_8ch_7x },
{ .id = 0x10de0005, .name = "MCP77/78 HDMI", .patch = patch_nvhdmi_8ch_7x },
{ .id = 0x10de0006, .name = "MCP77/78 HDMI", .patch = patch_nvhdmi_8ch_7x },
{ .id = 0x10de0007, .name = "MCP79/7A HDMI", .patch = patch_nvhdmi_8ch_7x },
ALSA: HDA: Unify HDMI hotplug handling. This change unifies the initial handling of a pin's state with the code to update a pin's state after a hotplug (unsolicited response) event. The initial probing, and all updates, are now routed through hdmi_present_sense. The stored PD and ELDV status is now always derived from GetPinSense verb execution, and not from the data in the unsolicited response. This means: a) The WAR for NVIDIA codec's UR.PD values ("old_pin_detect") can be removed, since this only affected the no-longer-used unsolicited response payload. b) In turn, this means that most NVIDIA codecs can simply use patch_generic_hdmi instead of having a custom variant just to set old_pin_detect. c) When PD && ELDV becomes true, no extra verbs are executed, because the GetPinSense that was previously executed by snd_hdmi_get_eld (really, hdmi_eld_valid) has simply moved into hdmi_present_sense. d) When PD && ELDV becomes false, there is a single extra GetPinSense verb executed for codecs where old_pin_detect wasn't set, i.e. some NVIDIA, and all ATI/AMD and Intel codecs. I doubt this will be a performance issue. The new unified code in hdmi_present_sense also ensures that eld->eld_valid is not set unless eld->monitor_present is also set. This protects against potential invalid combinations of PD and ELDV received from HW, and transitively from a graphics driver. Also, print the derived PD/ELDV bits from hdmi_present_sense so the kernel log always displays the actual state stored, which will differ from the values in the unsolicited response for NVIDIA HW where old_pin_detect was previously set. Finally, a couple of small tweaks originally by Takashi: * Clear the ELD content to zero before reading it, so that if it's not read (i.e. when !(PD && ELDV)) it's in a known state. * Don't show ELD fields in /proc ELD files when the ELD isn't valid. The only possibility I can see for regression here is a codec where the GetPinSense verb returns incorrect data. However, we're already exposed to that, since that data is used (a) from hdmi_add_pin to set up the initial pin state, and (b) within snd_hda_input_jack_report to query a pin's presence value. As such, I don't believe any HW has bugs here. Includes-changes-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-24 23:11:17 +00:00
{ .id = 0x10de000a, .name = "GPU 0a HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de000b, .name = "GPU 0b HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de000c, .name = "MCP89 HDMI", .patch = patch_generic_hdmi },
{ .id = 0x10de000d, .name = "GPU 0d HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0010, .name = "GPU 10 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0011, .name = "GPU 11 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0012, .name = "GPU 12 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0013, .name = "GPU 13 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0014, .name = "GPU 14 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0015, .name = "GPU 15 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0016, .name = "GPU 16 HDMI/DP", .patch = patch_generic_hdmi },
/* 17 is known to be absent */
ALSA: HDA: Unify HDMI hotplug handling. This change unifies the initial handling of a pin's state with the code to update a pin's state after a hotplug (unsolicited response) event. The initial probing, and all updates, are now routed through hdmi_present_sense. The stored PD and ELDV status is now always derived from GetPinSense verb execution, and not from the data in the unsolicited response. This means: a) The WAR for NVIDIA codec's UR.PD values ("old_pin_detect") can be removed, since this only affected the no-longer-used unsolicited response payload. b) In turn, this means that most NVIDIA codecs can simply use patch_generic_hdmi instead of having a custom variant just to set old_pin_detect. c) When PD && ELDV becomes true, no extra verbs are executed, because the GetPinSense that was previously executed by snd_hdmi_get_eld (really, hdmi_eld_valid) has simply moved into hdmi_present_sense. d) When PD && ELDV becomes false, there is a single extra GetPinSense verb executed for codecs where old_pin_detect wasn't set, i.e. some NVIDIA, and all ATI/AMD and Intel codecs. I doubt this will be a performance issue. The new unified code in hdmi_present_sense also ensures that eld->eld_valid is not set unless eld->monitor_present is also set. This protects against potential invalid combinations of PD and ELDV received from HW, and transitively from a graphics driver. Also, print the derived PD/ELDV bits from hdmi_present_sense so the kernel log always displays the actual state stored, which will differ from the values in the unsolicited response for NVIDIA HW where old_pin_detect was previously set. Finally, a couple of small tweaks originally by Takashi: * Clear the ELD content to zero before reading it, so that if it's not read (i.e. when !(PD && ELDV)) it's in a known state. * Don't show ELD fields in /proc ELD files when the ELD isn't valid. The only possibility I can see for regression here is a codec where the GetPinSense verb returns incorrect data. However, we're already exposed to that, since that data is used (a) from hdmi_add_pin to set up the initial pin state, and (b) within snd_hda_input_jack_report to query a pin's presence value. As such, I don't believe any HW has bugs here. Includes-changes-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-24 23:11:17 +00:00
{ .id = 0x10de0018, .name = "GPU 18 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0019, .name = "GPU 19 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de001a, .name = "GPU 1a HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de001b, .name = "GPU 1b HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de001c, .name = "GPU 1c HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0040, .name = "GPU 40 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0041, .name = "GPU 41 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0042, .name = "GPU 42 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0043, .name = "GPU 43 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0044, .name = "GPU 44 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0051, .name = "GPU 51 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0060, .name = "GPU 60 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch },
{ .id = 0x11069f80, .name = "VX900 HDMI/DP", .patch = patch_via_hdmi },
{ .id = 0x11069f81, .name = "VX900 HDMI/DP", .patch = patch_via_hdmi },
{ .id = 0x11069f84, .name = "VX11 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x11069f85, .name = "VX11 HDMI/DP", .patch = patch_generic_hdmi },
{ .id = 0x80860054, .name = "IbexPeak HDMI", .patch = patch_generic_hdmi },
{ .id = 0x80862801, .name = "Bearlake HDMI", .patch = patch_generic_hdmi },
{ .id = 0x80862802, .name = "Cantiga HDMI", .patch = patch_generic_hdmi },
{ .id = 0x80862803, .name = "Eaglelake HDMI", .patch = patch_generic_hdmi },
{ .id = 0x80862804, .name = "IbexPeak HDMI", .patch = patch_generic_hdmi },
{ .id = 0x80862805, .name = "CougarPoint HDMI", .patch = patch_generic_hdmi },
{ .id = 0x80862806, .name = "PantherPoint HDMI", .patch = patch_generic_hdmi },
{ .id = 0x80862807, .name = "Haswell HDMI", .patch = patch_generic_hdmi },
{ .id = 0x80862880, .name = "CedarTrail HDMI", .patch = patch_generic_hdmi },
{ .id = 0x80862882, .name = "Valleyview2 HDMI", .patch = patch_generic_hdmi },
{ .id = 0x808629fb, .name = "Crestline HDMI", .patch = patch_generic_hdmi },
{} /* terminator */
};
MODULE_ALIAS("snd-hda-codec-id:1002793c");
MODULE_ALIAS("snd-hda-codec-id:10027919");
MODULE_ALIAS("snd-hda-codec-id:1002791a");
MODULE_ALIAS("snd-hda-codec-id:1002aa01");
MODULE_ALIAS("snd-hda-codec-id:10951390");
MODULE_ALIAS("snd-hda-codec-id:10951392");
MODULE_ALIAS("snd-hda-codec-id:10de0002");
MODULE_ALIAS("snd-hda-codec-id:10de0003");
MODULE_ALIAS("snd-hda-codec-id:10de0005");
MODULE_ALIAS("snd-hda-codec-id:10de0006");
MODULE_ALIAS("snd-hda-codec-id:10de0007");
MODULE_ALIAS("snd-hda-codec-id:10de000a");
MODULE_ALIAS("snd-hda-codec-id:10de000b");
MODULE_ALIAS("snd-hda-codec-id:10de000c");
MODULE_ALIAS("snd-hda-codec-id:10de000d");
MODULE_ALIAS("snd-hda-codec-id:10de0010");
MODULE_ALIAS("snd-hda-codec-id:10de0011");
MODULE_ALIAS("snd-hda-codec-id:10de0012");
MODULE_ALIAS("snd-hda-codec-id:10de0013");
MODULE_ALIAS("snd-hda-codec-id:10de0014");
MODULE_ALIAS("snd-hda-codec-id:10de0015");
MODULE_ALIAS("snd-hda-codec-id:10de0016");
MODULE_ALIAS("snd-hda-codec-id:10de0018");
MODULE_ALIAS("snd-hda-codec-id:10de0019");
MODULE_ALIAS("snd-hda-codec-id:10de001a");
MODULE_ALIAS("snd-hda-codec-id:10de001b");
MODULE_ALIAS("snd-hda-codec-id:10de001c");
MODULE_ALIAS("snd-hda-codec-id:10de0040");
MODULE_ALIAS("snd-hda-codec-id:10de0041");
MODULE_ALIAS("snd-hda-codec-id:10de0042");
MODULE_ALIAS("snd-hda-codec-id:10de0043");
MODULE_ALIAS("snd-hda-codec-id:10de0044");
MODULE_ALIAS("snd-hda-codec-id:10de0051");
MODULE_ALIAS("snd-hda-codec-id:10de0060");
MODULE_ALIAS("snd-hda-codec-id:10de0067");
MODULE_ALIAS("snd-hda-codec-id:10de8001");
MODULE_ALIAS("snd-hda-codec-id:11069f80");
MODULE_ALIAS("snd-hda-codec-id:11069f81");
MODULE_ALIAS("snd-hda-codec-id:11069f84");
MODULE_ALIAS("snd-hda-codec-id:11069f85");
MODULE_ALIAS("snd-hda-codec-id:17e80047");
MODULE_ALIAS("snd-hda-codec-id:80860054");
MODULE_ALIAS("snd-hda-codec-id:80862801");
MODULE_ALIAS("snd-hda-codec-id:80862802");
MODULE_ALIAS("snd-hda-codec-id:80862803");
MODULE_ALIAS("snd-hda-codec-id:80862804");
MODULE_ALIAS("snd-hda-codec-id:80862805");
MODULE_ALIAS("snd-hda-codec-id:80862806");
MODULE_ALIAS("snd-hda-codec-id:80862807");
MODULE_ALIAS("snd-hda-codec-id:80862880");
MODULE_ALIAS("snd-hda-codec-id:80862882");
MODULE_ALIAS("snd-hda-codec-id:808629fb");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("HDMI HD-audio codec");
MODULE_ALIAS("snd-hda-codec-intelhdmi");
MODULE_ALIAS("snd-hda-codec-nvhdmi");
MODULE_ALIAS("snd-hda-codec-atihdmi");
static struct hda_codec_preset_list intel_list = {
.preset = snd_hda_preset_hdmi,
.owner = THIS_MODULE,
};
static int __init patch_hdmi_init(void)
{
return snd_hda_add_codec_preset(&intel_list);
}
static void __exit patch_hdmi_exit(void)
{
snd_hda_delete_codec_preset(&intel_list);
}
module_init(patch_hdmi_init)
module_exit(patch_hdmi_exit)