mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-08-26 02:39:48 +00:00
Code Issues Releases Wiki Activity
linux-stable/fs/f2fs/recovery.c

935 lines
23 KiB
C
Raw Normal View History

f2fs: add SPDX license identifiers Remove the verbose license text from f2fs files and replace them with SPDX tags. This does not change the license of any of the code. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-12 01:16:07 +00:00
// SPDX-License-Identifier: GPL-2.0
f2fs: adjust kernel coding style As pointed out by Randy Dunlap, this patch removes all usage of "/**" for comment blocks. Instead, just use "/*". Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-29 04:28:09 +00:00
/*
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
* fs/f2fs/recovery.c
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*/
f2fs: Handle casefolding with Encryption Expand f2fs's casefolding support to include encrypted directories. To index casefolded+encrypted directories, we use the SipHash of the casefolded name, keyed by a key derived from the directory's fscrypt master key. This ensures that the dirhash doesn't leak information about the plaintext filenames. Encryption keys are unavailable during roll-forward recovery, so we can't compute the dirhash when recovering a new dentry in an encrypted + casefolded directory. To avoid having to force a checkpoint when a new file is fsync'ed, store the dirhash on-disk appended to i_name. This patch incorporates work by Eric Biggers <ebiggers@google.com> and Jaegeuk Kim <jaegeuk@kernel.org>. Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-11-19 06:09:04 +00:00
#include <asm/unaligned.h>
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
#include <linux/fs.h>
#include <linux/f2fs_fs.h>
mm: introduce memalloc_retry_wait() Various places in the kernel - largely in filesystems - respond to a memory allocation failure by looping around and re-trying. Some of these cannot conveniently use __GFP_NOFAIL, for reasons such as: - a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on - a need to check for the process being signalled between failures - the possibility that other recovery actions could be performed - the allocation is quite deep in support code, and passing down an extra flag to say if __GFP_NOFAIL is wanted would be clumsy. Many of these currently use congestion_wait() which (in almost all cases) simply waits the given timeout - congestion isn't tracked for most devices. It isn't clear what the best delay is for loops, but it is clear that the various filesystems shouldn't be responsible for choosing a timeout. This patch introduces memalloc_retry_wait() with takes on that responsibility. Code that wants to retry a memory allocation can call this function passing the GFP flags that were used. It will wait however is appropriate. For now, it only considers __GFP_NORETRY and whatever gfpflags_allow_blocking() tests. If blocking is allowed without __GFP_NORETRY, then alloc_page either made some reclaim progress, or waited for a while, before failing. So there is no need for much further waiting. memalloc_retry_wait() will wait until the current jiffie ends. If this condition is not met, then alloc_page() won't have waited much if at all. In that case memalloc_retry_wait() waits about 200ms. This is the delay that most current loops uses. linux/sched/mm.h needs to be included in some files now, but linux/backing-dev.h does not. Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Chao Yu <chao@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:07:14 +00:00
#include <linux/sched/mm.h>
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
#include "f2fs.h"
#include "node.h"
#include "segment.h"
f2fs: fix roll-forward missing scenarios We can summarize the roll forward recovery scenarios as follows. [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) -> Update the latest inode(x). 2. inode(x) | CP | inode(F) | dnode(F) -> No problem. 3. inode(x) | CP | dnode(F) | inode(x) -> Recover to the latest dnode(F), and drop the last inode(x) 4. inode(x) | CP | dnode(F) | inode(F) -> No problem. 5. CP | inode(x) | dnode(F) -> The inode(DF) was missing. Should drop this dnode(F). 6. CP | inode(DF) | dnode(F) -> No problem. 7. CP | dnode(F) | inode(DF) -> If f2fs_iget fails, then goto next to find inode(DF). 8. CP | dnode(F) | inode(x) -> If f2fs_iget fails, then goto next to find inode(DF). But it will fail due to no inode(DF). So, this patch adds some missing points such as #1, #5, #7, and #8. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-15 23:46:08 +00:00
/*
* Roll forward recovery scenarios.
*
* [Term] F: fsync_mark, D: dentry_mark
*
* 1. inode(x) | CP | inode(x) | dnode(F)
* -> Update the latest inode(x).
*
* 2. inode(x) | CP | inode(F) | dnode(F)
* -> No problem.
*
* 3. inode(x) | CP | dnode(F) | inode(x)
* -> Recover to the latest dnode(F), and drop the last inode(x)
*
* 4. inode(x) | CP | dnode(F) | inode(F)
* -> No problem.
*
* 5. CP | inode(x) | dnode(F)
* -> The inode(DF) was missing. Should drop this dnode(F).
*
* 6. CP | inode(DF) | dnode(F)
* -> No problem.
*
* 7. CP | dnode(F) | inode(DF)
* -> If f2fs_iget fails, then goto next to find inode(DF).
*
* 8. CP | dnode(F) | inode(x)
* -> If f2fs_iget fails, then goto next to find inode(DF).
* But it will fail due to no inode(DF).
*/
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
static struct kmem_cache *fsync_entry_slab;
unicode: clean up the Kconfig symbol confusion Turn the CONFIG_UNICODE symbol into a tristate that generates some always built in code and remove the confusing CONFIG_UNICODE_UTF8_DATA symbol. Note that a lot of the IS_ENABLED() checks could be turned from cpp statements into normal ifs, but this change is intended to be fairly mechanic, so that should be cleaned up later. Fixes: 2b3d04787012 ("unicode: Add utf8-data module") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
2022-01-18 06:56:14 +00:00
#if IS_ENABLED(CONFIG_UNICODE)
f2fs: introduce f2fs_casefolded_name slab cache Add a slab cache: "f2fs_casefolded_name" for memory allocation of casefold name. Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-06-10 23:46:30 +00:00
extern struct kmem_cache *f2fs_cf_name_slab;
#endif
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
bool f2fs_space_for_roll_forward(struct f2fs_sb_info *sbi)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
{
f2fs: use percpu_counter for alloc_valid_block_count This patch uses percpu_count for sbi->alloc_valid_block_count. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-16 18:06:50 +00:00
s64 nalloc = percpu_counter_sum_positive(&sbi->alloc_valid_block_count);
if (sbi->last_valid_block_count + nalloc > sbi->user_block_count)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
return false;
f2fs: add a way to limit roll forward recovery time This adds a sysfs entry to call checkpoint during fsync() in order to avoid long elapsed time to run roll-forward recovery when booting the device. Default value doesn't enforce the limitation which is same as before. Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-01-27 21:31:43 +00:00
if (NM_I(sbi)->max_rf_node_blocks &&
percpu_counter_sum_positive(&sbi->rf_node_block_count) >=
NM_I(sbi)->max_rf_node_blocks)
return false;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
return true;
}
static struct fsync_inode_entry *get_fsync_inode(struct list_head *head,
nid_t ino)
{
struct fsync_inode_entry *entry;
f2fs: use list_for_each_entry{_safe} for simplyfying code This patch use list_for_each_entry{_safe} instead of list_for_each{_safe} for simplfying code. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-29 03:33:17 +00:00
list_for_each_entry(entry, head, list)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
if (entry->inode->i_ino == ino)
return entry;
f2fs: use list_for_each_entry{_safe} for simplyfying code This patch use list_for_each_entry{_safe} instead of list_for_each{_safe} for simplfying code. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-29 03:33:17 +00:00
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
return NULL;
}
f2fs: add common iget in add_fsync_inode There is no functional change. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:48:15 +00:00
static struct fsync_inode_entry *add_fsync_inode(struct f2fs_sb_info *sbi,
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
struct list_head *head, nid_t ino, bool quota_inode)
f2fs: factor out fsync inode entry operations Factor out fsync inode entry operations into {add,del}_fsync_inode. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-29 12:13:37 +00:00
{
f2fs: avoid ENOMEM during roll-forward recovery This patch gives another chances during roll-forward recovery regarding to -ENOMEM. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:59:39 +00:00
struct inode *inode;
f2fs: factor out fsync inode entry operations Factor out fsync inode entry operations into {add,del}_fsync_inode. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-29 12:13:37 +00:00
struct fsync_inode_entry *entry;
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
int err;
f2fs: factor out fsync inode entry operations Factor out fsync inode entry operations into {add,del}_fsync_inode. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-29 12:13:37 +00:00
f2fs: avoid ENOMEM during roll-forward recovery This patch gives another chances during roll-forward recovery regarding to -ENOMEM. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:59:39 +00:00
inode = f2fs_iget_retry(sbi->sb, ino);
f2fs: add common iget in add_fsync_inode There is no functional change. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:48:15 +00:00
if (IS_ERR(inode))
return ERR_CAST(inode);
f2fs: support fault injection for dquot_initialize() This patch adds a new function f2fs_dquot_initialize() to wrap dquot_initialize(), and it supports to inject fault into f2fs_dquot_initialize() to simulate inner failure occurs in dquot_initialize(). Usage: a) echo 65536 > /sys/fs/f2fs/<dev>/inject_type or b) mount -o fault_type=65536 <dev> <mountpoint> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-10-28 13:03:05 +00:00
err = f2fs_dquot_initialize(inode);
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
if (err)
goto err_out;
if (quota_inode) {
err = dquot_alloc_inode(inode);
if (err)
goto err_out;
}
f2fs: support fault injection for f2fs_kmem_cache_alloc() This patch supports to inject fault into f2fs_kmem_cache_alloc(). Usage: a) echo 32768 > /sys/fs/f2fs/<dev>/inject_type or b) mount -o fault_type=32768 <dev> <mountpoint> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-09 00:24:48 +00:00
entry = f2fs_kmem_cache_alloc(fsync_entry_slab,
GFP_F2FS_ZERO, true, NULL);
f2fs: factor out fsync inode entry operations Factor out fsync inode entry operations into {add,del}_fsync_inode. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-29 12:13:37 +00:00
entry->inode = inode;
list_add_tail(&entry->list, head);
return entry;
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
err_out:
iput(inode);
return ERR_PTR(err);
f2fs: factor out fsync inode entry operations Factor out fsync inode entry operations into {add,del}_fsync_inode. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-29 12:13:37 +00:00
}
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 10:49:26 +00:00
static void del_fsync_inode(struct fsync_inode_entry *entry, int drop)
f2fs: factor out fsync inode entry operations Factor out fsync inode entry operations into {add,del}_fsync_inode. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-29 12:13:37 +00:00
{
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 10:49:26 +00:00
if (drop) {
/* inode should not be recovered, drop it */
f2fs_inode_synced(entry->inode);
}
f2fs: factor out fsync inode entry operations Factor out fsync inode entry operations into {add,del}_fsync_inode. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-29 12:13:37 +00:00
iput(entry->inode);
list_del(&entry->list);
kmem_cache_free(fsync_entry_slab, entry);
}
f2fs: rework filename handling Rework f2fs's handling of filenames to use a new 'struct f2fs_filename'. Similar to 'struct ext4_filename', this stores the usr_fname, disk_name, dirhash, crypto_buf, and casefolded name. Some of these names can be NULL in some cases. 'struct f2fs_filename' differs from 'struct fscrypt_name' mainly in that the casefolded name is included. For user-initiated directory operations like lookup() and create(), initialize the f2fs_filename by translating the corresponding fscrypt_name, then computing the dirhash and casefolded name if needed. This makes the dirhash and casefolded name be cached for each syscall, so we don't have to recompute them repeatedly. (Previously, f2fs computed the dirhash once per directory level, and the casefolded name once per directory block.) This improves performance. This rework also makes it much easier to correctly handle all combinations of normal, encrypted, casefolded, and encrypted+casefolded directories. (The fourth isn't supported yet but is being worked on.) The only other cases where an f2fs_filename gets initialized are for two filesystem-internal operations: (1) when converting an inline directory to a regular one, we grab the needed disk_name and hash from an existing f2fs_dir_entry; and (2) when roll-forward recovering a new dentry, we grab the needed disk_name from f2fs_inode::i_name and compute the hash. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-05-07 07:59:04 +00:00
static int init_recovered_filename(const struct inode *dir,
struct f2fs_inode *raw_inode,
struct f2fs_filename *fname,
struct qstr *usr_fname)
{
int err;
memset(fname, 0, sizeof(*fname));
fname->disk_name.len = le32_to_cpu(raw_inode->i_namelen);
fname->disk_name.name = raw_inode->i_name;
if (WARN_ON(fname->disk_name.len > F2FS_NAME_LEN))
return -ENAMETOOLONG;
if (!IS_ENCRYPTED(dir)) {
usr_fname->name = fname->disk_name.name;
usr_fname->len = fname->disk_name.len;
fname->usr_fname = usr_fname;
}
/* Compute the hash of the filename */
f2fs: Handle casefolding with Encryption Expand f2fs's casefolding support to include encrypted directories. To index casefolded+encrypted directories, we use the SipHash of the casefolded name, keyed by a key derived from the directory's fscrypt master key. This ensures that the dirhash doesn't leak information about the plaintext filenames. Encryption keys are unavailable during roll-forward recovery, so we can't compute the dirhash when recovering a new dentry in an encrypted + casefolded directory. To avoid having to force a checkpoint when a new file is fsync'ed, store the dirhash on-disk appended to i_name. This patch incorporates work by Eric Biggers <ebiggers@google.com> and Jaegeuk Kim <jaegeuk@kernel.org>. Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-11-19 06:09:04 +00:00
if (IS_ENCRYPTED(dir) && IS_CASEFOLDED(dir)) {
/*
* In this case the hash isn't computable without the key, so it
* was saved on-disk.
*/
if (fname->disk_name.len + sizeof(f2fs_hash_t) > F2FS_NAME_LEN)
return -EINVAL;
fname->hash = get_unaligned((f2fs_hash_t *)
&raw_inode->i_name[fname->disk_name.len]);
} else if (IS_CASEFOLDED(dir)) {
f2fs: rework filename handling Rework f2fs's handling of filenames to use a new 'struct f2fs_filename'. Similar to 'struct ext4_filename', this stores the usr_fname, disk_name, dirhash, crypto_buf, and casefolded name. Some of these names can be NULL in some cases. 'struct f2fs_filename' differs from 'struct fscrypt_name' mainly in that the casefolded name is included. For user-initiated directory operations like lookup() and create(), initialize the f2fs_filename by translating the corresponding fscrypt_name, then computing the dirhash and casefolded name if needed. This makes the dirhash and casefolded name be cached for each syscall, so we don't have to recompute them repeatedly. (Previously, f2fs computed the dirhash once per directory level, and the casefolded name once per directory block.) This improves performance. This rework also makes it much easier to correctly handle all combinations of normal, encrypted, casefolded, and encrypted+casefolded directories. (The fourth isn't supported yet but is being worked on.) The only other cases where an f2fs_filename gets initialized are for two filesystem-internal operations: (1) when converting an inline directory to a regular one, we grab the needed disk_name and hash from an existing f2fs_dir_entry; and (2) when roll-forward recovering a new dentry, we grab the needed disk_name from f2fs_inode::i_name and compute the hash. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-05-07 07:59:04 +00:00
err = f2fs_init_casefolded_name(dir, fname);
if (err)
return err;
f2fs_hash_filename(dir, fname);
unicode: clean up the Kconfig symbol confusion Turn the CONFIG_UNICODE symbol into a tristate that generates some always built in code and remove the confusing CONFIG_UNICODE_UTF8_DATA symbol. Note that a lot of the IS_ENABLED() checks could be turned from cpp statements into normal ifs, but this change is intended to be fairly mechanic, so that should be cleaned up later. Fixes: 2b3d04787012 ("unicode: Add utf8-data module") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
2022-01-18 06:56:14 +00:00
#if IS_ENABLED(CONFIG_UNICODE)
f2fs: rework filename handling Rework f2fs's handling of filenames to use a new 'struct f2fs_filename'. Similar to 'struct ext4_filename', this stores the usr_fname, disk_name, dirhash, crypto_buf, and casefolded name. Some of these names can be NULL in some cases. 'struct f2fs_filename' differs from 'struct fscrypt_name' mainly in that the casefolded name is included. For user-initiated directory operations like lookup() and create(), initialize the f2fs_filename by translating the corresponding fscrypt_name, then computing the dirhash and casefolded name if needed. This makes the dirhash and casefolded name be cached for each syscall, so we don't have to recompute them repeatedly. (Previously, f2fs computed the dirhash once per directory level, and the casefolded name once per directory block.) This improves performance. This rework also makes it much easier to correctly handle all combinations of normal, encrypted, casefolded, and encrypted+casefolded directories. (The fourth isn't supported yet but is being worked on.) The only other cases where an f2fs_filename gets initialized are for two filesystem-internal operations: (1) when converting an inline directory to a regular one, we grab the needed disk_name and hash from an existing f2fs_dir_entry; and (2) when roll-forward recovering a new dentry, we grab the needed disk_name from f2fs_inode::i_name and compute the hash. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-05-07 07:59:04 +00:00
/* Case-sensitive match is fine for recovery */
f2fs: introduce f2fs_casefolded_name slab cache Add a slab cache: "f2fs_casefolded_name" for memory allocation of casefold name. Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-06-10 23:46:30 +00:00
kmem_cache_free(f2fs_cf_name_slab, fname->cf_name.name);
f2fs: rework filename handling Rework f2fs's handling of filenames to use a new 'struct f2fs_filename'. Similar to 'struct ext4_filename', this stores the usr_fname, disk_name, dirhash, crypto_buf, and casefolded name. Some of these names can be NULL in some cases. 'struct f2fs_filename' differs from 'struct fscrypt_name' mainly in that the casefolded name is included. For user-initiated directory operations like lookup() and create(), initialize the f2fs_filename by translating the corresponding fscrypt_name, then computing the dirhash and casefolded name if needed. This makes the dirhash and casefolded name be cached for each syscall, so we don't have to recompute them repeatedly. (Previously, f2fs computed the dirhash once per directory level, and the casefolded name once per directory block.) This improves performance. This rework also makes it much easier to correctly handle all combinations of normal, encrypted, casefolded, and encrypted+casefolded directories. (The fourth isn't supported yet but is being worked on.) The only other cases where an f2fs_filename gets initialized are for two filesystem-internal operations: (1) when converting an inline directory to a regular one, we grab the needed disk_name and hash from an existing f2fs_dir_entry; and (2) when roll-forward recovering a new dentry, we grab the needed disk_name from f2fs_inode::i_name and compute the hash. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-05-07 07:59:04 +00:00
fname->cf_name.name = NULL;
#endif
} else {
f2fs_hash_filename(dir, fname);
}
return 0;
}
f2fs: fix inode cache leak When testing f2fs with inline_dentry option, generic/342 reports: VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day... After rmmod f2fs module, kenrel shows following dmesg: ============================================================================= BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080 CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276 c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463 616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c11c7276>] slab_err+0x76/0x80 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0 [<c1198a38>] kmem_cache_destroy+0x158/0x1f0 [<c176b43d>] ? mutex_unlock+0xd/0x10 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 INFO: Object 0xd1e6d9e0 @offset=6624 kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7 c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14 f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 The reason is: in recovery flow, we use delayed iput mechanism for directory which has recovered dentry block. It means the reference of inode will be held until last dirty dentry page being writebacked. But when we mount f2fs with inline_dentry option, during recovery, dirent may only be recovered into dir inode page rather than dentry page, so there are no chance for us to release inode reference in ->writepage when writebacking last dentry page. We can call paired iget/iput explicityly for inline_dentry case, but for non-inline_dentry case, iput will call writeback_single_inode to write all data pages synchronously, but during recovery, ->writepages of f2fs skips writing all pages, result in losing dirent. This patch fixes this issue by obsoleting old mechanism, and introduce a new dir_list to hold all directory inodes which has recovered datas until finishing recovery. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-07 08:15:05 +00:00
static int recover_dentry(struct inode *inode, struct page *ipage,
struct list_head *dir_list)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
{
f2fs: introduce F2FS_INODE macro to get f2fs_inode This patch introduces F2FS_INODE that returns struct f2fs_inode * from the inode page. By using this macro, we can remove unnecessary casting codes like below. struct f2fs_inode *ri = &F2FS_NODE(inode_page)->i; -> struct f2fs_inode *ri = F2FS_INODE(inode_page); Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-26 07:30:41 +00:00
struct f2fs_inode *raw_inode = F2FS_INODE(ipage);
f2fs: fix BUG_ON during f2fs_evict_inode(dir) During the dentry recovery routine, recover_inode() triggers __f2fs_add_link with its directory inode. In the following scenario, a bug is captured. 1. dir = f2fs_iget(pino) 2. __f2fs_add_link(dir, name) 3. iput(dir) -> f2fs_evict_inode() faces with BUG_ON(atomic_read(fi->dirty_dents)) Kernel BUG at ffffffffa01c0676 [verbose debug info unavailable] [<ffffffffa01c0676>] f2fs_evict_inode+0x276/0x300 [f2fs] Call Trace: [<ffffffff8118ea00>] evict+0xb0/0x1b0 [<ffffffff8118f1c5>] iput+0x105/0x190 [<ffffffffa01d2dac>] recover_fsync_data+0x3bc/0x1070 [f2fs] [<ffffffff81692e8a>] ? io_schedule+0xaa/0xd0 [<ffffffff81690acb>] ? __wait_on_bit_lock+0x7b/0xc0 [<ffffffff8111a0e7>] ? __lock_page+0x67/0x70 [<ffffffff81165e21>] ? kmem_cache_alloc+0x31/0x140 [<ffffffff8118a502>] ? __d_instantiate+0x92/0xf0 [<ffffffff812a949b>] ? security_d_instantiate+0x1b/0x30 [<ffffffff8118a5b4>] ? d_instantiate+0x54/0x70 This means that we should flush all the dentry pages between iget and iput(). But, during the recovery routine, it is unallowed due to consistency, so we have to wait the whole recovery process. And then, write_checkpoint flushes all the dirty dentry blocks, and nicely we can put the stale dir inodes from the dirty_dir_inode_list. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-15 07:40:02 +00:00
nid_t pino = le32_to_cpu(raw_inode->i_pino);
f2fs: fix dentry recovery routine The error scenario is: 1. create /a (1.a link /a /b) 2. sync 3. unlinke /a 4. create /a 5. fsync /a 6. Sudden power-off When the f2fs recovers the fsynced dentry, /a, we discover an exsiting dentry at f2fs_find_entry() in recover_dentry(). In such the case, we should unlink the existing dentry and its inode and then recover newly created dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-28 00:19:22 +00:00
struct f2fs_dir_entry *de;
f2fs: rework filename handling Rework f2fs's handling of filenames to use a new 'struct f2fs_filename'. Similar to 'struct ext4_filename', this stores the usr_fname, disk_name, dirhash, crypto_buf, and casefolded name. Some of these names can be NULL in some cases. 'struct f2fs_filename' differs from 'struct fscrypt_name' mainly in that the casefolded name is included. For user-initiated directory operations like lookup() and create(), initialize the f2fs_filename by translating the corresponding fscrypt_name, then computing the dirhash and casefolded name if needed. This makes the dirhash and casefolded name be cached for each syscall, so we don't have to recompute them repeatedly. (Previously, f2fs computed the dirhash once per directory level, and the casefolded name once per directory block.) This improves performance. This rework also makes it much easier to correctly handle all combinations of normal, encrypted, casefolded, and encrypted+casefolded directories. (The fourth isn't supported yet but is being worked on.) The only other cases where an f2fs_filename gets initialized are for two filesystem-internal operations: (1) when converting an inline directory to a regular one, we grab the needed disk_name and hash from an existing f2fs_dir_entry; and (2) when roll-forward recovering a new dentry, we grab the needed disk_name from f2fs_inode::i_name and compute the hash. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-05-07 07:59:04 +00:00
struct f2fs_filename fname;
struct qstr usr_fname;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
struct page *page;
f2fs: fix dentry recovery routine The error scenario is: 1. create /a (1.a link /a /b) 2. sync 3. unlinke /a 4. create /a 5. fsync /a 6. Sudden power-off When the f2fs recovers the fsynced dentry, /a, we discover an exsiting dentry at f2fs_find_entry() in recover_dentry(). In such the case, we should unlink the existing dentry and its inode and then recover newly created dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-28 00:19:22 +00:00
struct inode *dir, *einode;
f2fs: fix inode cache leak When testing f2fs with inline_dentry option, generic/342 reports: VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day... After rmmod f2fs module, kenrel shows following dmesg: ============================================================================= BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080 CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276 c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463 616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c11c7276>] slab_err+0x76/0x80 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0 [<c1198a38>] kmem_cache_destroy+0x158/0x1f0 [<c176b43d>] ? mutex_unlock+0xd/0x10 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 INFO: Object 0xd1e6d9e0 @offset=6624 kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7 c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14 f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 The reason is: in recovery flow, we use delayed iput mechanism for directory which has recovered dentry block. It means the reference of inode will be held until last dirty dentry page being writebacked. But when we mount f2fs with inline_dentry option, during recovery, dirent may only be recovered into dir inode page rather than dentry page, so there are no chance for us to release inode reference in ->writepage when writebacking last dentry page. We can call paired iget/iput explicityly for inline_dentry case, but for non-inline_dentry case, iput will call writeback_single_inode to write all data pages synchronously, but during recovery, ->writepages of f2fs skips writing all pages, result in losing dirent. This patch fixes this issue by obsoleting old mechanism, and introduce a new dir_list to hold all directory inodes which has recovered datas until finishing recovery. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-07 08:15:05 +00:00
struct fsync_inode_entry *entry;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
int err = 0;
f2fs: add roll-forward recovery process for encrypted dentry Add roll-forward recovery process for encrypted dentry, so the first fsync issued to an encrypted file does not need writing checkpoint. This improves the performance of the following test at thousands of small files: open -> write -> fsync -> close Signed-off-by: Shuoran Liu <liushuoran@huawei.com> Acked-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: modify kernel message to show encrypted names] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-29 03:27:56 +00:00
char *name;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: fix inode cache leak When testing f2fs with inline_dentry option, generic/342 reports: VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day... After rmmod f2fs module, kenrel shows following dmesg: ============================================================================= BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080 CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276 c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463 616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c11c7276>] slab_err+0x76/0x80 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0 [<c1198a38>] kmem_cache_destroy+0x158/0x1f0 [<c176b43d>] ? mutex_unlock+0xd/0x10 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 INFO: Object 0xd1e6d9e0 @offset=6624 kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7 c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14 f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 The reason is: in recovery flow, we use delayed iput mechanism for directory which has recovered dentry block. It means the reference of inode will be held until last dirty dentry page being writebacked. But when we mount f2fs with inline_dentry option, during recovery, dirent may only be recovered into dir inode page rather than dentry page, so there are no chance for us to release inode reference in ->writepage when writebacking last dentry page. We can call paired iget/iput explicityly for inline_dentry case, but for non-inline_dentry case, iput will call writeback_single_inode to write all data pages synchronously, but during recovery, ->writepages of f2fs skips writing all pages, result in losing dirent. This patch fixes this issue by obsoleting old mechanism, and introduce a new dir_list to hold all directory inodes which has recovered datas until finishing recovery. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-07 08:15:05 +00:00
entry = get_fsync_inode(dir_list, pino);
if (!entry) {
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
entry = add_fsync_inode(F2FS_I_SB(inode), dir_list,
pino, false);
f2fs: add common iget in add_fsync_inode There is no functional change. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:48:15 +00:00
if (IS_ERR(entry)) {
dir = ERR_CAST(entry);
err = PTR_ERR(entry);
f2fs: fix inode cache leak When testing f2fs with inline_dentry option, generic/342 reports: VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day... After rmmod f2fs module, kenrel shows following dmesg: ============================================================================= BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080 CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276 c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463 616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c11c7276>] slab_err+0x76/0x80 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0 [<c1198a38>] kmem_cache_destroy+0x158/0x1f0 [<c176b43d>] ? mutex_unlock+0xd/0x10 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 INFO: Object 0xd1e6d9e0 @offset=6624 kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7 c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14 f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 The reason is: in recovery flow, we use delayed iput mechanism for directory which has recovered dentry block. It means the reference of inode will be held until last dirty dentry page being writebacked. But when we mount f2fs with inline_dentry option, during recovery, dirent may only be recovered into dir inode page rather than dentry page, so there are no chance for us to release inode reference in ->writepage when writebacking last dentry page. We can call paired iget/iput explicityly for inline_dentry case, but for non-inline_dentry case, iput will call writeback_single_inode to write all data pages synchronously, but during recovery, ->writepages of f2fs skips writing all pages, result in losing dirent. This patch fixes this issue by obsoleting old mechanism, and introduce a new dir_list to hold all directory inodes which has recovered datas until finishing recovery. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-07 08:15:05 +00:00
goto out;
}
f2fs: remove costly dirty_dir_inode operations This patch removes list opeations in handling dirty dir inodes. Previously, F2FS traverses whole the list of dirty dir inodes to check whether there is an existing inode or not, resulting in heavy CPU overheads. So this patch removes such the traverse operations by adding FI_DIRTY_DIR to indicate the inode lies on the list or not. Through this simple flag, we can remove redundant operations gracefully. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-15 02:19:28 +00:00
}
f2fs: fix inode cache leak When testing f2fs with inline_dentry option, generic/342 reports: VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day... After rmmod f2fs module, kenrel shows following dmesg: ============================================================================= BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080 CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276 c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463 616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c11c7276>] slab_err+0x76/0x80 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0 [<c1198a38>] kmem_cache_destroy+0x158/0x1f0 [<c176b43d>] ? mutex_unlock+0xd/0x10 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 INFO: Object 0xd1e6d9e0 @offset=6624 kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7 c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14 f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 The reason is: in recovery flow, we use delayed iput mechanism for directory which has recovered dentry block. It means the reference of inode will be held until last dirty dentry page being writebacked. But when we mount f2fs with inline_dentry option, during recovery, dirent may only be recovered into dir inode page rather than dentry page, so there are no chance for us to release inode reference in ->writepage when writebacking last dentry page. We can call paired iget/iput explicityly for inline_dentry case, but for non-inline_dentry case, iput will call writeback_single_inode to write all data pages synchronously, but during recovery, ->writepages of f2fs skips writing all pages, result in losing dirent. This patch fixes this issue by obsoleting old mechanism, and introduce a new dir_list to hold all directory inodes which has recovered datas until finishing recovery. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-07 08:15:05 +00:00
dir = entry->inode;
f2fs: rework filename handling Rework f2fs's handling of filenames to use a new 'struct f2fs_filename'. Similar to 'struct ext4_filename', this stores the usr_fname, disk_name, dirhash, crypto_buf, and casefolded name. Some of these names can be NULL in some cases. 'struct f2fs_filename' differs from 'struct fscrypt_name' mainly in that the casefolded name is included. For user-initiated directory operations like lookup() and create(), initialize the f2fs_filename by translating the corresponding fscrypt_name, then computing the dirhash and casefolded name if needed. This makes the dirhash and casefolded name be cached for each syscall, so we don't have to recompute them repeatedly. (Previously, f2fs computed the dirhash once per directory level, and the casefolded name once per directory block.) This improves performance. This rework also makes it much easier to correctly handle all combinations of normal, encrypted, casefolded, and encrypted+casefolded directories. (The fourth isn't supported yet but is being worked on.) The only other cases where an f2fs_filename gets initialized are for two filesystem-internal operations: (1) when converting an inline directory to a regular one, we grab the needed disk_name and hash from an existing f2fs_dir_entry; and (2) when roll-forward recovering a new dentry, we grab the needed disk_name from f2fs_inode::i_name and compute the hash. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-05-07 07:59:04 +00:00
err = init_recovered_filename(dir, raw_inode, &fname, &usr_fname);
if (err)
f2fs: fix inode cache leak When testing f2fs with inline_dentry option, generic/342 reports: VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day... After rmmod f2fs module, kenrel shows following dmesg: ============================================================================= BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080 CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276 c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463 616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c11c7276>] slab_err+0x76/0x80 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0 [<c1198a38>] kmem_cache_destroy+0x158/0x1f0 [<c176b43d>] ? mutex_unlock+0xd/0x10 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 INFO: Object 0xd1e6d9e0 @offset=6624 kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7 c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14 f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 The reason is: in recovery flow, we use delayed iput mechanism for directory which has recovered dentry block. It means the reference of inode will be held until last dirty dentry page being writebacked. But when we mount f2fs with inline_dentry option, during recovery, dirent may only be recovered into dir inode page rather than dentry page, so there are no chance for us to release inode reference in ->writepage when writebacking last dentry page. We can call paired iget/iput explicityly for inline_dentry case, but for non-inline_dentry case, iput will call writeback_single_inode to write all data pages synchronously, but during recovery, ->writepages of f2fs skips writing all pages, result in losing dirent. This patch fixes this issue by obsoleting old mechanism, and introduce a new dir_list to hold all directory inodes which has recovered datas until finishing recovery. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-07 08:15:05 +00:00
goto out;
f2fs: fix dentry recovery routine The error scenario is: 1. create /a (1.a link /a /b) 2. sync 3. unlinke /a 4. create /a 5. fsync /a 6. Sudden power-off When the f2fs recovers the fsynced dentry, /a, we discover an exsiting dentry at f2fs_find_entry() in recover_dentry(). In such the case, we should unlink the existing dentry and its inode and then recover newly created dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-28 00:19:22 +00:00
retry:
f2fs: add roll-forward recovery process for encrypted dentry Add roll-forward recovery process for encrypted dentry, so the first fsync issued to an encrypted file does not need writing checkpoint. This improves the performance of the following test at thousands of small files: open -> write -> fsync -> close Signed-off-by: Shuoran Liu <liushuoran@huawei.com> Acked-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: modify kernel message to show encrypted names] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-29 03:27:56 +00:00
de = __f2fs_find_entry(dir, &fname, &page);
f2fs: do not increase link count during recovery If there are multiple fsynced dnodes having a dent flag, roll-forward routine sets FI_INC_LINK for their inode, and recovery_dentry increases its link count accordingly. That results in normal file having a link count as 2, so we can't unlink those files. This was added to handle several inode blocks having same inode number with different directory paths. But, current f2fs doesn't replay all of path changes and only recover its dentry for the last fsynced inode block. So, there is no reason to do this. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-04-01 01:03:29 +00:00
if (de && inode->i_ino == le32_to_cpu(de->ino))
f2fs: don't put dentry page in pagecache into highmem Previous dentry page uses highmem, which will cause panic in platforms using highmem (such as arm), since the address space of dentry pages from highmem directly goes into the decryption path via the function fscrypt_fname_disk_to_usr. But sg_init_one assumes the address is not from highmem, and then cause panic since it doesn't call kmap_high but kunmap_high is triggered at the end. To fix this problem in a simple way, this patch avoids to put dentry page in pagecache into highmem. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix coding style] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-02-28 12:31:52 +00:00
goto out_put;
f2fs: do not increase link count during recovery If there are multiple fsynced dnodes having a dent flag, roll-forward routine sets FI_INC_LINK for their inode, and recovery_dentry increases its link count accordingly. That results in normal file having a link count as 2, so we can't unlink those files. This was added to handle several inode blocks having same inode number with different directory paths. But, current f2fs doesn't replay all of path changes and only recover its dentry for the last fsynced inode block. So, there is no reason to do this. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-04-01 01:03:29 +00:00
f2fs: fix dentry recovery routine The error scenario is: 1. create /a (1.a link /a /b) 2. sync 3. unlinke /a 4. create /a 5. fsync /a 6. Sudden power-off When the f2fs recovers the fsynced dentry, /a, we discover an exsiting dentry at f2fs_find_entry() in recover_dentry(). In such the case, we should unlink the existing dentry and its inode and then recover newly created dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-28 00:19:22 +00:00
if (de) {
f2fs: avoid ENOMEM during roll-forward recovery This patch gives another chances during roll-forward recovery regarding to -ENOMEM. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:59:39 +00:00
einode = f2fs_iget_retry(inode->i_sb, le32_to_cpu(de->ino));
f2fs: fix dentry recovery routine The error scenario is: 1. create /a (1.a link /a /b) 2. sync 3. unlinke /a 4. create /a 5. fsync /a 6. Sudden power-off When the f2fs recovers the fsynced dentry, /a, we discover an exsiting dentry at f2fs_find_entry() in recover_dentry(). In such the case, we should unlink the existing dentry and its inode and then recover newly created dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-28 00:19:22 +00:00
if (IS_ERR(einode)) {
WARN_ON(1);
f2fs: set errno when f2fs_iget failed in recover_dentry We should set the error number correctly when we fail in recover_dentry(), so the recover flow could stop for the reason as error number shows instead of continuing. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-04-28 09:58:34 +00:00
err = PTR_ERR(einode);
if (err == -ENOENT)
f2fs: fix dentry recovery routine The error scenario is: 1. create /a (1.a link /a /b) 2. sync 3. unlinke /a 4. create /a 5. fsync /a 6. Sudden power-off When the f2fs recovers the fsynced dentry, /a, we discover an exsiting dentry at f2fs_find_entry() in recover_dentry(). In such the case, we should unlink the existing dentry and its inode and then recover newly created dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-28 00:19:22 +00:00
err = -EEXIST;
f2fs: don't put dentry page in pagecache into highmem Previous dentry page uses highmem, which will cause panic in platforms using highmem (such as arm), since the address space of dentry pages from highmem directly goes into the decryption path via the function fscrypt_fname_disk_to_usr. But sg_init_one assumes the address is not from highmem, and then cause panic since it doesn't call kmap_high but kunmap_high is triggered at the end. To fix this problem in a simple way, this patch avoids to put dentry page in pagecache into highmem. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix coding style] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-02-28 12:31:52 +00:00
goto out_put;
f2fs: account for orphan inodes during recovery During recovery, orphan inodes are deleted via truncate_hole(). These orphans are added by recover_dentry() via f2fs_delete_entry(). However, f2fs_delete_entry() adds them via add_orphan_inode() without calling acquire_orphan_inode() first. This prevents the counters from being incremented properly, which causes them to underflow when remove_orphan_inode() is called later on. Signed-off-by: Russ Knize <rknize@motorola.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-24 14:40:57 +00:00
}
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
f2fs: support fault injection for dquot_initialize() This patch adds a new function f2fs_dquot_initialize() to wrap dquot_initialize(), and it supports to inject fault into f2fs_dquot_initialize() to simulate inner failure occurs in dquot_initialize(). Usage: a) echo 65536 > /sys/fs/f2fs/<dev>/inject_type or b) mount -o fault_type=65536 <dev> <mountpoint> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-10-28 13:03:05 +00:00
err = f2fs_dquot_initialize(einode);
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
if (err) {
iput(einode);
f2fs: don't put dentry page in pagecache into highmem Previous dentry page uses highmem, which will cause panic in platforms using highmem (such as arm), since the address space of dentry pages from highmem directly goes into the decryption path via the function fscrypt_fname_disk_to_usr. But sg_init_one assumes the address is not from highmem, and then cause panic since it doesn't call kmap_high but kunmap_high is triggered at the end. To fix this problem in a simple way, this patch avoids to put dentry page in pagecache into highmem. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix coding style] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-02-28 12:31:52 +00:00
goto out_put;
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
}
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
err = f2fs_acquire_orphan_inode(F2FS_I_SB(inode));
f2fs: account for orphan inodes during recovery During recovery, orphan inodes are deleted via truncate_hole(). These orphans are added by recover_dentry() via f2fs_delete_entry(). However, f2fs_delete_entry() adds them via add_orphan_inode() without calling acquire_orphan_inode() first. This prevents the counters from being incremented properly, which causes them to underflow when remove_orphan_inode() is called later on. Signed-off-by: Russ Knize <rknize@motorola.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-24 14:40:57 +00:00
if (err) {
iput(einode);
f2fs: don't put dentry page in pagecache into highmem Previous dentry page uses highmem, which will cause panic in platforms using highmem (such as arm), since the address space of dentry pages from highmem directly goes into the decryption path via the function fscrypt_fname_disk_to_usr. But sg_init_one assumes the address is not from highmem, and then cause panic since it doesn't call kmap_high but kunmap_high is triggered at the end. To fix this problem in a simple way, this patch avoids to put dentry page in pagecache into highmem. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix coding style] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-02-28 12:31:52 +00:00
goto out_put;
f2fs: fix dentry recovery routine The error scenario is: 1. create /a (1.a link /a /b) 2. sync 3. unlinke /a 4. create /a 5. fsync /a 6. Sudden power-off When the f2fs recovers the fsynced dentry, /a, we discover an exsiting dentry at f2fs_find_entry() in recover_dentry(). In such the case, we should unlink the existing dentry and its inode and then recover newly created dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-28 00:19:22 +00:00
}
f2fs: export dir operations for inline dir This patch exports some dir operations for inline dir, additionally introduces f2fs_drop_nlink from f2fs_delete_entry for reusing by inline dir function. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-24 10:17:04 +00:00
f2fs_delete_entry(de, page, dir, einode);
f2fs: fix dentry recovery routine The error scenario is: 1. create /a (1.a link /a /b) 2. sync 3. unlinke /a 4. create /a 5. fsync /a 6. Sudden power-off When the f2fs recovers the fsynced dentry, /a, we discover an exsiting dentry at f2fs_find_entry() in recover_dentry(). In such the case, we should unlink the existing dentry and its inode and then recover newly created dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-28 00:19:22 +00:00
iput(einode);
goto retry;
f2fs: fix to report error number of f2fs_find_entry This patch fixes to report the right error number of f2fs_find_entry to its caller. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-07-19 00:27:47 +00:00
} else if (IS_ERR(page)) {
err = PTR_ERR(page);
} else {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
err = f2fs_add_dentry(dir, &fname, inode,
f2fs: fix to report error number of f2fs_find_entry This patch fixes to report the right error number of f2fs_find_entry to its caller. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-07-19 00:27:47 +00:00
inode->i_ino, inode->i_mode);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
f2fs: avoid ENOMEM during roll-forward recovery This patch gives another chances during roll-forward recovery regarding to -ENOMEM. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:59:39 +00:00
if (err == -ENOMEM)
goto retry;
f2fs: account for orphan inodes during recovery During recovery, orphan inodes are deleted via truncate_hole(). These orphans are added by recover_dentry() via f2fs_delete_entry(). However, f2fs_delete_entry() adds them via add_orphan_inode() without calling acquire_orphan_inode() first. This prevents the counters from being incremented properly, which causes them to underflow when remove_orphan_inode() is called later on. Signed-off-by: Russ Knize <rknize@motorola.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-24 14:40:57 +00:00
goto out;
f2fs: don't put dentry page in pagecache into highmem Previous dentry page uses highmem, which will cause panic in platforms using highmem (such as arm), since the address space of dentry pages from highmem directly goes into the decryption path via the function fscrypt_fname_disk_to_usr. But sg_init_one assumes the address is not from highmem, and then cause panic since it doesn't call kmap_high but kunmap_high is triggered at the end. To fix this problem in a simple way, this patch avoids to put dentry page in pagecache into highmem. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix coding style] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-02-28 12:31:52 +00:00
out_put:
f2fs: account for orphan inodes during recovery During recovery, orphan inodes are deleted via truncate_hole(). These orphans are added by recover_dentry() via f2fs_delete_entry(). However, f2fs_delete_entry() adds them via add_orphan_inode() without calling acquire_orphan_inode() first. This prevents the counters from being incremented properly, which causes them to underflow when remove_orphan_inode() is called later on. Signed-off-by: Russ Knize <rknize@motorola.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-24 14:40:57 +00:00
f2fs_put_page(page, 0);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
out:
f2fs: add roll-forward recovery process for encrypted dentry Add roll-forward recovery process for encrypted dentry, so the first fsync issued to an encrypted file does not need writing checkpoint. This improves the performance of the following test at thousands of small files: open -> write -> fsync -> close Signed-off-by: Shuoran Liu <liushuoran@huawei.com> Acked-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: modify kernel message to show encrypted names] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-29 03:27:56 +00:00
if (file_enc_name(inode))
name = "<encrypted>";
else
name = raw_inode->i_name;
f2fs: introduce f2fs_<level> macros to wrap f2fs_printk() - Add and use f2fs_<level> macros - Convert f2fs_msg to f2fs_printk - Remove level from f2fs_printk and embed the level in the format - Coalesce formats and align multi-line arguments - Remove unnecessary duplicate extern f2fs_msg f2fs.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-18 09:48:42 +00:00
f2fs_notice(F2FS_I_SB(inode), "%s: ino = %x, name = %s, dir = %lx, err = %d",
__func__, ino_of_node(ipage), name,
IS_ERR(dir) ? 0 : dir->i_ino, err);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
return err;
}
f2fs: guarantee journalled quota data by checkpoint For journalled quota mode, let checkpoint to flush dquot dirty data and quota file data to guarntee persistence of all quota sysfile in last checkpoint, by this way, we can avoid corrupting quota sysfile when encountering SPO. The implementation is as below: 1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is cached dquot metadata changes in quota subsystem, and later checkpoint should: a) flush dquot metadata into quota file. b) flush quota file to storage to keep file usage be consistent. 2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota operation failed due to -EIO or -ENOSPC, so later, a) checkpoint will skip syncing dquot metadata. b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a hint for fsck repairing. 3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota data updating is very heavy, it may cause hungtask in block_operation(). To avoid this, if our retry time exceed threshold, let's just skip flushing and retry in next checkpoint(). Signed-off-by: Weichao Guo <guoweichao@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: avoid warnings and set fsck flag] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 12:05:00 +00:00
static int recover_quota_data(struct inode *inode, struct page *page)
{
struct f2fs_inode *raw = F2FS_INODE(page);
struct iattr attr;
uid_t i_uid = le32_to_cpu(raw->i_uid);
gid_t i_gid = le32_to_cpu(raw->i_gid);
int err;
memset(&attr, 0, sizeof(attr));
attr: port attribute changes to new types Now that we introduced new infrastructure to increase the type safety for filesystems supporting idmapped mounts port the first part of the vfs over to them. This ports the attribute changes codepaths to rely on the new better helpers using a dedicated type. Before this change we used to take a shortcut and place the actual values that would be written to inode->i_{g,u}id into struct iattr. This had the advantage that we moved idmappings mostly out of the picture early on but it made reasoning about changes more difficult than it should be. The filesystem was never explicitly told that it dealt with an idmapped mount. The transition to the value that needed to be stored in inode->i_{g,u}id appeared way too early and increased the probability of bugs in various codepaths. We know place the same value in struct iattr no matter if this is an idmapped mount or not. The vfs will only deal with type safe vfs{g,u}id_t. This makes it massively safer to perform permission checks as the type will tell us what checks we need to perform and what helpers we need to use. Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to inode->i_{g,u}id since they are different types. Instead they need to use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the vfs{g,u}id into the filesystem. The other nice effect is that filesystems like overlayfs don't need to care about idmappings explicitly anymore and can simply set up struct iattr accordingly directly. Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1] Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-06-21 14:14:54 +00:00
attr.ia_vfsuid = VFSUIDT_INIT(make_kuid(inode->i_sb->s_user_ns, i_uid));
attr.ia_vfsgid = VFSGIDT_INIT(make_kgid(inode->i_sb->s_user_ns, i_gid));
f2fs: guarantee journalled quota data by checkpoint For journalled quota mode, let checkpoint to flush dquot dirty data and quota file data to guarntee persistence of all quota sysfile in last checkpoint, by this way, we can avoid corrupting quota sysfile when encountering SPO. The implementation is as below: 1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is cached dquot metadata changes in quota subsystem, and later checkpoint should: a) flush dquot metadata into quota file. b) flush quota file to storage to keep file usage be consistent. 2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota operation failed due to -EIO or -ENOSPC, so later, a) checkpoint will skip syncing dquot metadata. b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a hint for fsck repairing. 3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota data updating is very heavy, it may cause hungtask in block_operation(). To avoid this, if our retry time exceed threshold, let's just skip flushing and retry in next checkpoint(). Signed-off-by: Weichao Guo <guoweichao@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: avoid warnings and set fsck flag] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 12:05:00 +00:00
attr: port attribute changes to new types Now that we introduced new infrastructure to increase the type safety for filesystems supporting idmapped mounts port the first part of the vfs over to them. This ports the attribute changes codepaths to rely on the new better helpers using a dedicated type. Before this change we used to take a shortcut and place the actual values that would be written to inode->i_{g,u}id into struct iattr. This had the advantage that we moved idmappings mostly out of the picture early on but it made reasoning about changes more difficult than it should be. The filesystem was never explicitly told that it dealt with an idmapped mount. The transition to the value that needed to be stored in inode->i_{g,u}id appeared way too early and increased the probability of bugs in various codepaths. We know place the same value in struct iattr no matter if this is an idmapped mount or not. The vfs will only deal with type safe vfs{g,u}id_t. This makes it massively safer to perform permission checks as the type will tell us what checks we need to perform and what helpers we need to use. Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to inode->i_{g,u}id since they are different types. Instead they need to use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the vfs{g,u}id into the filesystem. The other nice effect is that filesystems like overlayfs don't need to care about idmappings explicitly anymore and can simply set up struct iattr accordingly directly. Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1] Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-06-21 14:14:54 +00:00
if (!vfsuid_eq(attr.ia_vfsuid, i_uid_into_vfsuid(&init_user_ns, inode)))
f2fs: guarantee journalled quota data by checkpoint For journalled quota mode, let checkpoint to flush dquot dirty data and quota file data to guarntee persistence of all quota sysfile in last checkpoint, by this way, we can avoid corrupting quota sysfile when encountering SPO. The implementation is as below: 1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is cached dquot metadata changes in quota subsystem, and later checkpoint should: a) flush dquot metadata into quota file. b) flush quota file to storage to keep file usage be consistent. 2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota operation failed due to -EIO or -ENOSPC, so later, a) checkpoint will skip syncing dquot metadata. b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a hint for fsck repairing. 3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota data updating is very heavy, it may cause hungtask in block_operation(). To avoid this, if our retry time exceed threshold, let's just skip flushing and retry in next checkpoint(). Signed-off-by: Weichao Guo <guoweichao@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: avoid warnings and set fsck flag] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 12:05:00 +00:00
attr.ia_valid |= ATTR_UID;
attr: port attribute changes to new types Now that we introduced new infrastructure to increase the type safety for filesystems supporting idmapped mounts port the first part of the vfs over to them. This ports the attribute changes codepaths to rely on the new better helpers using a dedicated type. Before this change we used to take a shortcut and place the actual values that would be written to inode->i_{g,u}id into struct iattr. This had the advantage that we moved idmappings mostly out of the picture early on but it made reasoning about changes more difficult than it should be. The filesystem was never explicitly told that it dealt with an idmapped mount. The transition to the value that needed to be stored in inode->i_{g,u}id appeared way too early and increased the probability of bugs in various codepaths. We know place the same value in struct iattr no matter if this is an idmapped mount or not. The vfs will only deal with type safe vfs{g,u}id_t. This makes it massively safer to perform permission checks as the type will tell us what checks we need to perform and what helpers we need to use. Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to inode->i_{g,u}id since they are different types. Instead they need to use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the vfs{g,u}id into the filesystem. The other nice effect is that filesystems like overlayfs don't need to care about idmappings explicitly anymore and can simply set up struct iattr accordingly directly. Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1] Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-06-21 14:14:54 +00:00
if (!vfsgid_eq(attr.ia_vfsgid, i_gid_into_vfsgid(&init_user_ns, inode)))
f2fs: guarantee journalled quota data by checkpoint For journalled quota mode, let checkpoint to flush dquot dirty data and quota file data to guarntee persistence of all quota sysfile in last checkpoint, by this way, we can avoid corrupting quota sysfile when encountering SPO. The implementation is as below: 1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is cached dquot metadata changes in quota subsystem, and later checkpoint should: a) flush dquot metadata into quota file. b) flush quota file to storage to keep file usage be consistent. 2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota operation failed due to -EIO or -ENOSPC, so later, a) checkpoint will skip syncing dquot metadata. b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a hint for fsck repairing. 3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota data updating is very heavy, it may cause hungtask in block_operation(). To avoid this, if our retry time exceed threshold, let's just skip flushing and retry in next checkpoint(). Signed-off-by: Weichao Guo <guoweichao@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: avoid warnings and set fsck flag] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 12:05:00 +00:00
attr.ia_valid |= ATTR_GID;
if (!attr.ia_valid)
return 0;
quota: port quota helpers mount ids Port the is_quota_modification() and dqout_transfer() helper to type safe vfs{g,u}id_t. Since these helpers are only called by a few filesystems don't introduce a new helper but simply extend the existing helpers to pass down the mount's idmapping. Note, that this is a non-functional change, i.e. nothing will have happened here or at the end of this series to how quota are done! This a change necessary because we will at the end of this series make ownership changes easier to reason about by keeping the original value in struct iattr for both non-idmapped and idmapped mounts. For now we always pass the initial idmapping which makes the idmapping functions these helpers call nops. This is done because we currently always pass the actual value to be written to i_{g,u}id via struct iattr. While this allowed us to treat the {g,u}id values in struct iattr as values that can be directly written to inode->i_{g,u}id it also increases the potential for confusion for filesystems. Now that we are have dedicated types to prevent this confusion we will ultimately only map the value from the idmapped mount into a filesystem value that can be written to inode->i_{g,u}id when the filesystem actually updates the inode. So pass down the initial idmapping until we finished that conversion at which point we pass down the mount's idmapping. Since struct iattr uses an anonymous union with overlapping types as supported by the C standard, filesystems that haven't converted to ia_vfs{g,u}id won't see any difference and things will continue to work as before. In other words, no functional changes intended with this change. Link: https://lore.kernel.org/r/20220621141454.2914719-7-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-06-21 14:14:52 +00:00
err = dquot_transfer(&init_user_ns, inode, &attr);
f2fs: guarantee journalled quota data by checkpoint For journalled quota mode, let checkpoint to flush dquot dirty data and quota file data to guarntee persistence of all quota sysfile in last checkpoint, by this way, we can avoid corrupting quota sysfile when encountering SPO. The implementation is as below: 1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is cached dquot metadata changes in quota subsystem, and later checkpoint should: a) flush dquot metadata into quota file. b) flush quota file to storage to keep file usage be consistent. 2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota operation failed due to -EIO or -ENOSPC, so later, a) checkpoint will skip syncing dquot metadata. b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a hint for fsck repairing. 3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota data updating is very heavy, it may cause hungtask in block_operation(). To avoid this, if our retry time exceed threshold, let's just skip flushing and retry in next checkpoint(). Signed-off-by: Weichao Guo <guoweichao@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: avoid warnings and set fsck flag] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 12:05:00 +00:00
if (err)
set_sbi_flag(F2FS_I_SB(inode), SBI_QUOTA_NEED_REPAIR);
return err;
}
f2fs: recover some i_inline flags This fixes lost i_inline flags during roll-forward. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-20 04:01:40 +00:00
static void recover_inline_flags(struct inode *inode, struct f2fs_inode *ri)
{
if (ri->i_inline & F2FS_PIN_FILE)
set_inode_flag(inode, FI_PIN_FILE);
else
clear_inode_flag(inode, FI_PIN_FILE);
if (ri->i_inline & F2FS_DATA_EXIST)
set_inode_flag(inode, FI_DATA_EXIST);
else
clear_inode_flag(inode, FI_DATA_EXIST);
}
f2fs: guarantee journalled quota data by checkpoint For journalled quota mode, let checkpoint to flush dquot dirty data and quota file data to guarntee persistence of all quota sysfile in last checkpoint, by this way, we can avoid corrupting quota sysfile when encountering SPO. The implementation is as below: 1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is cached dquot metadata changes in quota subsystem, and later checkpoint should: a) flush dquot metadata into quota file. b) flush quota file to storage to keep file usage be consistent. 2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota operation failed due to -EIO or -ENOSPC, so later, a) checkpoint will skip syncing dquot metadata. b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a hint for fsck repairing. 3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota data updating is very heavy, it may cause hungtask in block_operation(). To avoid this, if our retry time exceed threshold, let's just skip flushing and retry in next checkpoint(). Signed-off-by: Weichao Guo <guoweichao@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: avoid warnings and set fsck flag] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 12:05:00 +00:00
static int recover_inode(struct inode *inode, struct page *page)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
{
f2fs: fix roll-forward missing scenarios We can summarize the roll forward recovery scenarios as follows. [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) -> Update the latest inode(x). 2. inode(x) | CP | inode(F) | dnode(F) -> No problem. 3. inode(x) | CP | dnode(F) | inode(x) -> Recover to the latest dnode(F), and drop the last inode(x) 4. inode(x) | CP | dnode(F) | inode(F) -> No problem. 5. CP | inode(x) | dnode(F) -> The inode(DF) was missing. Should drop this dnode(F). 6. CP | inode(DF) | dnode(F) -> No problem. 7. CP | dnode(F) | inode(DF) -> If f2fs_iget fails, then goto next to find inode(DF). 8. CP | dnode(F) | inode(x) -> If f2fs_iget fails, then goto next to find inode(DF). But it will fail due to no inode(DF). So, this patch adds some missing points such as #1, #5, #7, and #8. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-15 23:46:08 +00:00
struct f2fs_inode *raw = F2FS_INODE(page);
f2fs crypto: add filename encryption for roll-forward recovery This patch adds a bit flag to indicate whether or not i_name in the inode is encrypted. If this name is encrypted, we can't do recover_dentry during roll-forward. So, f2fs_sync_file() needs to do checkpoint, if this will be needed in future. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-04-30 00:02:18 +00:00
char *name;
f2fs: guarantee journalled quota data by checkpoint For journalled quota mode, let checkpoint to flush dquot dirty data and quota file data to guarntee persistence of all quota sysfile in last checkpoint, by this way, we can avoid corrupting quota sysfile when encountering SPO. The implementation is as below: 1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is cached dquot metadata changes in quota subsystem, and later checkpoint should: a) flush dquot metadata into quota file. b) flush quota file to storage to keep file usage be consistent. 2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota operation failed due to -EIO or -ENOSPC, so later, a) checkpoint will skip syncing dquot metadata. b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a hint for fsck repairing. 3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota data updating is very heavy, it may cause hungtask in block_operation(). To avoid this, if our retry time exceed threshold, let's just skip flushing and retry in next checkpoint(). Signed-off-by: Weichao Guo <guoweichao@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: avoid warnings and set fsck flag] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 12:05:00 +00:00
int err;
f2fs: fix roll-forward missing scenarios We can summarize the roll forward recovery scenarios as follows. [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) -> Update the latest inode(x). 2. inode(x) | CP | inode(F) | dnode(F) -> No problem. 3. inode(x) | CP | dnode(F) | inode(x) -> Recover to the latest dnode(F), and drop the last inode(x) 4. inode(x) | CP | dnode(F) | inode(F) -> No problem. 5. CP | inode(x) | dnode(F) -> The inode(DF) was missing. Should drop this dnode(F). 6. CP | inode(DF) | dnode(F) -> No problem. 7. CP | dnode(F) | inode(DF) -> If f2fs_iget fails, then goto next to find inode(DF). 8. CP | dnode(F) | inode(x) -> If f2fs_iget fails, then goto next to find inode(DF). But it will fail due to no inode(DF). So, this patch adds some missing points such as #1, #5, #7, and #8. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-15 23:46:08 +00:00
inode->i_mode = le16_to_cpu(raw->i_mode);
f2fs: guarantee journalled quota data by checkpoint For journalled quota mode, let checkpoint to flush dquot dirty data and quota file data to guarntee persistence of all quota sysfile in last checkpoint, by this way, we can avoid corrupting quota sysfile when encountering SPO. The implementation is as below: 1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is cached dquot metadata changes in quota subsystem, and later checkpoint should: a) flush dquot metadata into quota file. b) flush quota file to storage to keep file usage be consistent. 2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota operation failed due to -EIO or -ENOSPC, so later, a) checkpoint will skip syncing dquot metadata. b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a hint for fsck repairing. 3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota data updating is very heavy, it may cause hungtask in block_operation(). To avoid this, if our retry time exceed threshold, let's just skip flushing and retry in next checkpoint(). Signed-off-by: Weichao Guo <guoweichao@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: avoid warnings and set fsck flag] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 12:05:00 +00:00
err = recover_quota_data(inode, page);
if (err)
return err;
f2fs: fix to recover inode's uid/gid during POR Step to reproduce this bug: 1. logon as root 2. mount -t f2fs /dev/sdd /mnt; 3. touch /mnt/file; 4. chown system /mnt/file; chgrp system /mnt/file; 5. xfs_io -f /mnt/file -c "fsync"; 6. godown /mnt; 7. umount /mnt; 8. mount -t f2fs /dev/sdd /mnt; After step 8) we will expect file's uid/gid are all system, but during recovery, these two fields were not been recovered, fix it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 09:41:30 +00:00
i_uid_write(inode, le32_to_cpu(raw->i_uid));
i_gid_write(inode, le32_to_cpu(raw->i_gid));
f2fs: fix to recover inode's project id during POR Testcase to reproduce this bug: 1. mkfs.f2fs -O extra_attr -O project_quota /dev/sdd 2. mount -t f2fs /dev/sdd /mnt/f2fs 3. touch /mnt/f2fs/file 4. sync 5. chattr -p 1 /mnt/f2fs/file 6. xfs_io -f /mnt/f2fs/file -c "fsync" 7. godown /mnt/f2fs 8. umount /mnt/f2fs 9. mount -t f2fs /dev/sdd /mnt/f2fs 10. lsattr -p /mnt/f2fs/file 0 -----------------N- /mnt/f2fs/file But actually, we expect the correct result is: 1 -----------------N- /mnt/f2fs/file The reason is we didn't recover inode.i_projid field during mount, fix it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-25 07:35:58 +00:00
if (raw->i_inline & F2FS_EXTRA_ATTR) {
f2fs: clean up f2fs_sb_has_##feature_name In F2FS_HAS_FEATURE(), we will use F2FS_SB(sb) to get sbi pointer to access .raw_super field, to avoid unneeded pointer conversion, this patch changes to F2FS_HAS_FEATURE() accept sbi parameter directly. Just do cleanup, no logic change. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-24 10:34:26 +00:00
if (f2fs_sb_has_project_quota(F2FS_I_SB(inode)) &&
f2fs: fix to recover inode's project id during POR Testcase to reproduce this bug: 1. mkfs.f2fs -O extra_attr -O project_quota /dev/sdd 2. mount -t f2fs /dev/sdd /mnt/f2fs 3. touch /mnt/f2fs/file 4. sync 5. chattr -p 1 /mnt/f2fs/file 6. xfs_io -f /mnt/f2fs/file -c "fsync" 7. godown /mnt/f2fs 8. umount /mnt/f2fs 9. mount -t f2fs /dev/sdd /mnt/f2fs 10. lsattr -p /mnt/f2fs/file 0 -----------------N- /mnt/f2fs/file But actually, we expect the correct result is: 1 -----------------N- /mnt/f2fs/file The reason is we didn't recover inode.i_projid field during mount, fix it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-25 07:35:58 +00:00
F2FS_FITS_IN_INODE(raw, le16_to_cpu(raw->i_extra_isize),
i_projid)) {
projid_t i_projid;
f2fs: fix to keep project quota consistent This patch does below changes to keep consistence of project quota data in sudden power-cut case: - update inode.i_projid and project quota atomically under lock_op() in f2fs_ioc_setproject() - recover inode.i_projid and project quota in recover_inode() Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-25 07:36:02 +00:00
kprojid_t kprojid;
f2fs: fix to recover inode's project id during POR Testcase to reproduce this bug: 1. mkfs.f2fs -O extra_attr -O project_quota /dev/sdd 2. mount -t f2fs /dev/sdd /mnt/f2fs 3. touch /mnt/f2fs/file 4. sync 5. chattr -p 1 /mnt/f2fs/file 6. xfs_io -f /mnt/f2fs/file -c "fsync" 7. godown /mnt/f2fs 8. umount /mnt/f2fs 9. mount -t f2fs /dev/sdd /mnt/f2fs 10. lsattr -p /mnt/f2fs/file 0 -----------------N- /mnt/f2fs/file But actually, we expect the correct result is: 1 -----------------N- /mnt/f2fs/file The reason is we didn't recover inode.i_projid field during mount, fix it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-25 07:35:58 +00:00
i_projid = (projid_t)le32_to_cpu(raw->i_projid);
f2fs: fix to keep project quota consistent This patch does below changes to keep consistence of project quota data in sudden power-cut case: - update inode.i_projid and project quota atomically under lock_op() in f2fs_ioc_setproject() - recover inode.i_projid and project quota in recover_inode() Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-25 07:36:02 +00:00
kprojid = make_kprojid(&init_user_ns, i_projid);
if (!projid_eq(kprojid, F2FS_I(inode)->i_projid)) {
err = f2fs_transfer_project_quota(inode,
kprojid);
if (err)
return err;
F2FS_I(inode)->i_projid = kprojid;
}
f2fs: fix to recover inode's project id during POR Testcase to reproduce this bug: 1. mkfs.f2fs -O extra_attr -O project_quota /dev/sdd 2. mount -t f2fs /dev/sdd /mnt/f2fs 3. touch /mnt/f2fs/file 4. sync 5. chattr -p 1 /mnt/f2fs/file 6. xfs_io -f /mnt/f2fs/file -c "fsync" 7. godown /mnt/f2fs 8. umount /mnt/f2fs 9. mount -t f2fs /dev/sdd /mnt/f2fs 10. lsattr -p /mnt/f2fs/file 0 -----------------N- /mnt/f2fs/file But actually, we expect the correct result is: 1 -----------------N- /mnt/f2fs/file The reason is we didn't recover inode.i_projid field during mount, fix it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-25 07:35:58 +00:00
}
}
f2fs: introduce f2fs_i_size_write with mark_inode_dirty_sync This patch introduces f2fs_i_size_write() to call mark_inode_dirty_sync() with i_size_write(). Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-20 16:22:03 +00:00
f2fs_i_size_write(inode, le64_to_cpu(raw->i_size));
f2fs: fix wrong i_atime recovery Shouldn't update in-memory i_atime with on-disk i_mtime of inode when recovering inode. Shuoran found this bug which is hidden for a long time, honour is belong to him. Signed-off-by: Shuoran Liu <liushuoran@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-03 16:26:55 +00:00
inode->i_atime.tv_sec = le64_to_cpu(raw->i_atime);
f2fs: fix roll-forward missing scenarios We can summarize the roll forward recovery scenarios as follows. [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) -> Update the latest inode(x). 2. inode(x) | CP | inode(F) | dnode(F) -> No problem. 3. inode(x) | CP | dnode(F) | inode(x) -> Recover to the latest dnode(F), and drop the last inode(x) 4. inode(x) | CP | dnode(F) | inode(F) -> No problem. 5. CP | inode(x) | dnode(F) -> The inode(DF) was missing. Should drop this dnode(F). 6. CP | inode(DF) | dnode(F) -> No problem. 7. CP | dnode(F) | inode(DF) -> If f2fs_iget fails, then goto next to find inode(DF). 8. CP | dnode(F) | inode(x) -> If f2fs_iget fails, then goto next to find inode(DF). But it will fail due to no inode(DF). So, this patch adds some missing points such as #1, #5, #7, and #8. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-15 23:46:08 +00:00
inode->i_ctime.tv_sec = le64_to_cpu(raw->i_ctime);
inode->i_mtime.tv_sec = le64_to_cpu(raw->i_mtime);
f2fs: fix wrong i_atime recovery Shouldn't update in-memory i_atime with on-disk i_mtime of inode when recovering inode. Shuoran found this bug which is hidden for a long time, honour is belong to him. Signed-off-by: Shuoran Liu <liushuoran@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-03 16:26:55 +00:00
inode->i_atime.tv_nsec = le32_to_cpu(raw->i_atime_nsec);
f2fs: fix roll-forward missing scenarios We can summarize the roll forward recovery scenarios as follows. [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) -> Update the latest inode(x). 2. inode(x) | CP | inode(F) | dnode(F) -> No problem. 3. inode(x) | CP | dnode(F) | inode(x) -> Recover to the latest dnode(F), and drop the last inode(x) 4. inode(x) | CP | dnode(F) | inode(F) -> No problem. 5. CP | inode(x) | dnode(F) -> The inode(DF) was missing. Should drop this dnode(F). 6. CP | inode(DF) | dnode(F) -> No problem. 7. CP | dnode(F) | inode(DF) -> If f2fs_iget fails, then goto next to find inode(DF). 8. CP | dnode(F) | inode(x) -> If f2fs_iget fails, then goto next to find inode(DF). But it will fail due to no inode(DF). So, this patch adds some missing points such as #1, #5, #7, and #8. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-15 23:46:08 +00:00
inode->i_ctime.tv_nsec = le32_to_cpu(raw->i_ctime_nsec);
inode->i_mtime.tv_nsec = le32_to_cpu(raw->i_mtime_nsec);
f2fs: add debug msgs in the recovery routine This patch adds some trivial debugging messages in the recovery process. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-16 06:04:49 +00:00
f2fs: do not activate auto_recovery for fallocated i_size If a file needs to keep its i_size by fallocate, we need to turn off auto recovery during roll-forward recovery. This will resolve the below scenario. 1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4096" -c "fsync" 2. xfs_io -f /mnt/f2fs/file -c "falloc -k 4096 4096" -c "fsync" 3. md5sum /mnt/f2fs/file; 4. godown /mnt/f2fs/ 5. umount /mnt/f2fs/ 6. mount -t f2fs /dev/sdx /mnt/f2fs 7. md5sum /mnt/f2fs/file Reported-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-28 23:33:38 +00:00
F2FS_I(inode)->i_advise = raw->i_advise;
f2fs: fix to recover inode's i_flags during POR Testcase to reproduce this bug: 1. mkfs.f2fs /dev/sdd 2. mount -t f2fs /dev/sdd /mnt/f2fs 3. touch /mnt/f2fs/file 4. sync 5. chattr +A /mnt/f2fs/file 6. xfs_io -f /mnt/f2fs/file -c "fsync" 7. godown /mnt/f2fs 8. umount /mnt/f2fs 9. mount -t f2fs /dev/sdd /mnt/f2fs 10. lsattr /mnt/f2fs/file -----------------N- /mnt/f2fs/file But actually, we expect the corrct result is: -------A---------N- /mnt/f2fs/file The reason is we didn't recover inode.i_flags field during mount, fix it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-25 07:35:59 +00:00
F2FS_I(inode)->i_flags = le32_to_cpu(raw->i_flags);
f2fs: fix to recover inode->i_flags of inode block during POR Testcase to reproduce this bug: 1. mkfs.f2fs /dev/sdd 2. mount -t f2fs /dev/sdd /mnt/f2fs 3. touch /mnt/f2fs/file 4. sync 5. chattr +a /mnt/f2fs/file 6. xfs_io -a /mnt/f2fs/file -c "fsync" 7. godown /mnt/f2fs 8. umount /mnt/f2fs 9. mount -t f2fs /dev/sdd /mnt/f2fs 10. xfs_io /mnt/f2fs/file There is no error when opening this file w/o O_APPEND, but actually, we expect the correct result should be: /mnt/f2fs/file: Operation not permitted The root cause is, in recover_inode(), we recover inode->i_flags more than F2FS_I(inode)->i_flags, so fix it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-06 19:03:38 +00:00
f2fs_set_inode_flags(inode);
f2fs: fix to recover inode's i_gc_failures during POR inode.i_gc_failures is used to indicate that skip count of migrating on blocks of inode, we should guarantee it can be recovered in sudden power-off case. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-25 07:36:00 +00:00
F2FS_I(inode)->i_gc_failures[GC_FAILURE_PIN] =
le16_to_cpu(raw->i_gc_failures);
f2fs: do not activate auto_recovery for fallocated i_size If a file needs to keep its i_size by fallocate, we need to turn off auto recovery during roll-forward recovery. This will resolve the below scenario. 1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4096" -c "fsync" 2. xfs_io -f /mnt/f2fs/file -c "falloc -k 4096 4096" -c "fsync" 3. md5sum /mnt/f2fs/file; 4. godown /mnt/f2fs/ 5. umount /mnt/f2fs/ 6. mount -t f2fs /dev/sdx /mnt/f2fs 7. md5sum /mnt/f2fs/file Reported-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-28 23:33:38 +00:00
f2fs: recover some i_inline flags This fixes lost i_inline flags during roll-forward. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-20 04:01:40 +00:00
recover_inline_flags(inode, raw);
f2fs: mark inode dirty explicitly in recover_inode() Mark inode dirty explicitly in the end of recover_inode() to make sure that all recoverable fields can be persisted later. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-25 07:36:03 +00:00
f2fs_mark_inode_dirty_sync(inode, true);
f2fs crypto: add filename encryption for roll-forward recovery This patch adds a bit flag to indicate whether or not i_name in the inode is encrypted. If this name is encrypted, we can't do recover_dentry during roll-forward. So, f2fs_sync_file() needs to do checkpoint, if this will be needed in future. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-04-30 00:02:18 +00:00
if (file_enc_name(inode))
name = "<encrypted>";
else
name = F2FS_INODE(page)->i_name;
f2fs: introduce f2fs_<level> macros to wrap f2fs_printk() - Add and use f2fs_<level> macros - Convert f2fs_msg to f2fs_printk - Remove level from f2fs_printk and embed the level in the format - Coalesce formats and align multi-line arguments - Remove unnecessary duplicate extern f2fs_msg f2fs.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-18 09:48:42 +00:00
f2fs_notice(F2FS_I_SB(inode), "recover_inode: ino = %x, name = %s, inline = %x",
ino_of_node(page), name, raw->i_inline);
f2fs: guarantee journalled quota data by checkpoint For journalled quota mode, let checkpoint to flush dquot dirty data and quota file data to guarntee persistence of all quota sysfile in last checkpoint, by this way, we can avoid corrupting quota sysfile when encountering SPO. The implementation is as below: 1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is cached dquot metadata changes in quota subsystem, and later checkpoint should: a) flush dquot metadata into quota file. b) flush quota file to storage to keep file usage be consistent. 2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota operation failed due to -EIO or -ENOSPC, so later, a) checkpoint will skip syncing dquot metadata. b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a hint for fsck repairing. 3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota data updating is very heavy, it may cause hungtask in block_operation(). To avoid this, if our retry time exceed threshold, let's just skip flushing and retry in next checkpoint(). Signed-off-by: Weichao Guo <guoweichao@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: avoid warnings and set fsck flag] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 12:05:00 +00:00
return 0;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
f2fs: adjust readahead block number during recovery In a fragmented image, entries in dnode block list may locate in incontiguous physical block address space, however, in recovery flow, we will always readahead BIO_MAX_VECS size blocks, so in such case, current readahead policy is low efficient, let's adjust readahead window size dynamically based on consecutiveness of dnode blocks. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-02-04 00:34:10 +00:00
static unsigned int adjust_por_ra_blocks(struct f2fs_sb_info *sbi,
unsigned int ra_blocks, unsigned int blkaddr,
unsigned int next_blkaddr)
{
if (blkaddr + 1 == next_blkaddr)
ra_blocks = min_t(unsigned int, RECOVERY_MAX_RA_BLOCKS,
ra_blocks * 2);
else if (next_blkaddr % sbi->blocks_per_seg)
ra_blocks = max_t(unsigned int, RECOVERY_MIN_RA_BLOCKS,
ra_blocks / 2);
return ra_blocks;
}
f2fs: avoid dirty node pages in check_only recovery In the check_only mode, we should not make any dirty node pages. Otherwise, we can get this panic: F2FS-fs (nvme0n1p1): Need to recover fsync data ------------[ cut here ]------------ kernel BUG at fs/f2fs/node.c:2204! CPU: 7 PID: 19923 Comm: mount Tainted: G OE 4.9.8 #2 RIP: 0010:[<ffffffffc0979c0b>] [<ffffffffc0979c0b>] flush_nat_entries+0x43b/0x7d0 [f2fs] Call Trace: [<ffffffffc096ddaa>] ? __f2fs_submit_merged_bio+0x5a/0xd0 [f2fs] [<ffffffffc096ddaa>] ? __f2fs_submit_merged_bio+0x5a/0xd0 [f2fs] [<ffffffffc096dddb>] ? __f2fs_submit_merged_bio+0x8b/0xd0 [f2fs] [<ffffffff860e450f>] ? up_write+0x1f/0x40 [<ffffffffc096dddb>] ? __f2fs_submit_merged_bio+0x8b/0xd0 [f2fs] [<ffffffffc0969f04>] write_checkpoint+0x2f4/0xf20 [f2fs] [<ffffffff860e938d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffc0960bc9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc0960bc9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc0960bd5>] f2fs_sync_fs+0x85/0x190 [f2fs] [<ffffffffc097b6de>] f2fs_balance_fs_bg+0x7e/0x1c0 [f2fs] [<ffffffffc0977b64>] f2fs_write_node_pages+0x34/0x350 [f2fs] [<ffffffff860e5f42>] ? __lock_is_held+0x52/0x70 [<ffffffff861d9b31>] do_writepages+0x21/0x30 [<ffffffff86298ce1>] __writeback_single_inode+0x61/0x760 [<ffffffff86909127>] ? _raw_spin_unlock+0x27/0x40 [<ffffffff8629a735>] writeback_single_inode+0xd5/0x190 [<ffffffff8629a889>] write_inode_now+0x99/0xc0 [<ffffffff86283876>] iput+0x1f6/0x2c0 [<ffffffffc0964b52>] f2fs_fill_super+0xc32/0x10c0 [f2fs] [<ffffffff86266462>] mount_bdev+0x182/0x1b0 [<ffffffffc0963f20>] ? f2fs_commit_super+0x100/0x100 [f2fs] [<ffffffffc0960da5>] f2fs_mount+0x15/0x20 [f2fs] [<ffffffff86266e08>] mount_fs+0x38/0x170 [<ffffffff86288bab>] vfs_kern_mount+0x6b/0x160 [<ffffffff8628bcfe>] do_mount+0x1be/0xd60 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-04-14 22:46:23 +00:00
static int find_fsync_dnodes(struct f2fs_sb_info *sbi, struct list_head *head,
bool check_only)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
{
struct curseg_info *curseg;
f2fs: use meta_inode cache to improve roll-forward speed Previously, all the dnode pages should be read during the roll-forward recovery. Even worsely, whole the chain was traversed twice. This patch removes that redundant and costly read operations by using page cache of meta_inode and readahead function as well. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 20:49:55 +00:00
struct page *page = NULL;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
block_t blkaddr;
f2fs: fix to handle looped node chain during recovery There is no checksum in node block now, so bit-transition from hardware can make node_footer.next_blkaddr being corrupted w/o any detection, result in node chain becoming looped one. For this condition, during recovery, in order to avoid running into dead loop, let's detect it and just skip out. Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-02-03 09:44:39 +00:00
unsigned int loop_cnt = 0;
f2fs: adjust readahead block number during recovery In a fragmented image, entries in dnode block list may locate in incontiguous physical block address space, however, in recovery flow, we will always readahead BIO_MAX_VECS size blocks, so in such case, current readahead policy is low efficient, let's adjust readahead window size dynamically based on consecutiveness of dnode blocks. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-02-04 00:34:10 +00:00
unsigned int ra_blocks = RECOVERY_MAX_RA_BLOCKS;
f2fs: fix to detect looped node chain correctly Below dmesg was printed when testing generic/388 of fstest: F2FS-fs (zram1): find_fsync_dnodes: detect looped node chain, blkaddr:526615, next:526616 F2FS-fs (zram1): Cannot recover all fsync data errno=-22 F2FS-fs (zram1): Mounted with checkpoint version = 22300d0e F2FS-fs (zram1): find_fsync_dnodes: detect looped node chain, blkaddr:526615, next:526616 F2FS-fs (zram1): Cannot recover all fsync data errno=-22 The reason is that we initialize free_blocks with free blocks of filesystem, so if filesystem is full, free_blocks can be zero, below condition will be true, so that, it will fail recovery. if (++loop_cnt >= free_blocks || blkaddr == next_blkaddr_of_node(page)) To fix this issue, initialize free_blocks with correct value which includes over-privision blocks. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-07-05 11:37:00 +00:00
unsigned int free_blocks = MAIN_SEGS(sbi) * sbi->blocks_per_seg -
valid_user_blocks(sbi);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
int err = 0;
/* get node pages in the current segment */
curseg = CURSEG_I(sbi, CURSEG_WARM_NODE);
f2fs: use existing macro to clean up some codes This patch use existing macro F2FS_INODE/NEXT_FREE_BLKADDR to clean up some codes. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-27 11:52:21 +00:00
blkaddr = NEXT_FREE_BLKADDR(sbi, curseg);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
while (1) {
struct fsync_inode_entry *entry;
f2fs: introduce and spread verify_blkaddr This patch introduces verify_blkaddr to check meta/data block address with valid range to detect bug earlier. In addition, once we encounter an invalid blkaddr, notice user to run fsck to fix, and let the kernel panic. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-05 09:44:11 +00:00
if (!f2fs_is_valid_blkaddr(sbi, blkaddr, META_POR))
f2fs: use meta_inode cache to improve roll-forward speed Previously, all the dnode pages should be read during the roll-forward recovery. Even worsely, whole the chain was traversed twice. This patch removes that redundant and costly read operations by using page cache of meta_inode and readahead function as well. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 20:49:55 +00:00
return 0;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
page = f2fs_get_tmp_page(sbi, blkaddr);
f2fs: fix to propagate error from __get_meta_page() If caller of __get_meta_page() can handle error, let's propagate error from __get_meta_page(). Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-07-16 16:02:17 +00:00
if (IS_ERR(page)) {
err = PTR_ERR(page);
break;
}
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
f2fs: fix error path of recovery There are some places in where we missed to unlock page or unlock page incorrectly, fix them. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-10 10:45:26 +00:00
if (!is_recoverable_dnode(page)) {
f2fs_put_page(page, 1);
f2fs: add debug msgs in the recovery routine This patch adds some trivial debugging messages in the recovery process. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-16 06:04:49 +00:00
break;
f2fs: fix error path of recovery There are some places in where we missed to unlock page or unlock page incorrectly, fix them. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-10 10:45:26 +00:00
}
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
if (!is_fsync_dnode(page))
goto next;
entry = get_fsync_inode(head, ino_of_node(page));
Revert "f2fs: do not recover from previous remained wrong dnodes" i_times of inode will be set with current system time which can be configured through 'date', so it's not safe to judge dnode block as garbage data or unchanged inode depend on i_times. Now, we have used enhanced 'cp_ver + cp' crc method to verify valid dnode block, so I expect recoverying invalid dnode is almost not possible. This reverts commit 807b1e1c8e08452948495b1a9985ab46d329e5c2. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-05 03:12:40 +00:00
if (!entry) {
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
bool quota_inode = false;
f2fs: avoid dirty node pages in check_only recovery In the check_only mode, we should not make any dirty node pages. Otherwise, we can get this panic: F2FS-fs (nvme0n1p1): Need to recover fsync data ------------[ cut here ]------------ kernel BUG at fs/f2fs/node.c:2204! CPU: 7 PID: 19923 Comm: mount Tainted: G OE 4.9.8 #2 RIP: 0010:[<ffffffffc0979c0b>] [<ffffffffc0979c0b>] flush_nat_entries+0x43b/0x7d0 [f2fs] Call Trace: [<ffffffffc096ddaa>] ? __f2fs_submit_merged_bio+0x5a/0xd0 [f2fs] [<ffffffffc096ddaa>] ? __f2fs_submit_merged_bio+0x5a/0xd0 [f2fs] [<ffffffffc096dddb>] ? __f2fs_submit_merged_bio+0x8b/0xd0 [f2fs] [<ffffffff860e450f>] ? up_write+0x1f/0x40 [<ffffffffc096dddb>] ? __f2fs_submit_merged_bio+0x8b/0xd0 [f2fs] [<ffffffffc0969f04>] write_checkpoint+0x2f4/0xf20 [f2fs] [<ffffffff860e938d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffc0960bc9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc0960bc9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc0960bd5>] f2fs_sync_fs+0x85/0x190 [f2fs] [<ffffffffc097b6de>] f2fs_balance_fs_bg+0x7e/0x1c0 [f2fs] [<ffffffffc0977b64>] f2fs_write_node_pages+0x34/0x350 [f2fs] [<ffffffff860e5f42>] ? __lock_is_held+0x52/0x70 [<ffffffff861d9b31>] do_writepages+0x21/0x30 [<ffffffff86298ce1>] __writeback_single_inode+0x61/0x760 [<ffffffff86909127>] ? _raw_spin_unlock+0x27/0x40 [<ffffffff8629a735>] writeback_single_inode+0xd5/0x190 [<ffffffff8629a889>] write_inode_now+0x99/0xc0 [<ffffffff86283876>] iput+0x1f6/0x2c0 [<ffffffffc0964b52>] f2fs_fill_super+0xc32/0x10c0 [f2fs] [<ffffffff86266462>] mount_bdev+0x182/0x1b0 [<ffffffffc0963f20>] ? f2fs_commit_super+0x100/0x100 [f2fs] [<ffffffffc0960da5>] f2fs_mount+0x15/0x20 [f2fs] [<ffffffff86266e08>] mount_fs+0x38/0x170 [<ffffffff86288bab>] vfs_kern_mount+0x6b/0x160 [<ffffffff8628bcfe>] do_mount+0x1be/0xd60 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-04-14 22:46:23 +00:00
if (!check_only &&
IS_INODE(page) && is_dent_dnode(page)) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
err = f2fs_recover_inode_page(sbi, page);
f2fs: fix error path of recovery There are some places in where we missed to unlock page or unlock page incorrectly, fix them. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-10 10:45:26 +00:00
if (err) {
f2fs_put_page(page, 1);
f2fs: add debug msgs in the recovery routine This patch adds some trivial debugging messages in the recovery process. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-16 06:04:49 +00:00
break;
f2fs: fix error path of recovery There are some places in where we missed to unlock page or unlock page incorrectly, fix them. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-10 10:45:26 +00:00
}
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
quota_inode = true;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
f2fs: fix roll-forward missing scenarios We can summarize the roll forward recovery scenarios as follows. [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) -> Update the latest inode(x). 2. inode(x) | CP | inode(F) | dnode(F) -> No problem. 3. inode(x) | CP | dnode(F) | inode(x) -> Recover to the latest dnode(F), and drop the last inode(x) 4. inode(x) | CP | dnode(F) | inode(F) -> No problem. 5. CP | inode(x) | dnode(F) -> The inode(DF) was missing. Should drop this dnode(F). 6. CP | inode(DF) | dnode(F) -> No problem. 7. CP | dnode(F) | inode(DF) -> If f2fs_iget fails, then goto next to find inode(DF). 8. CP | dnode(F) | inode(x) -> If f2fs_iget fails, then goto next to find inode(DF). But it will fail due to no inode(DF). So, this patch adds some missing points such as #1, #5, #7, and #8. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-15 23:46:08 +00:00
/*
* CP | dnode(F) | inode(DF)
* For this case, we should not give up now.
*/
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
entry = add_fsync_inode(sbi, head, ino_of_node(page),
quota_inode);
f2fs: add common iget in add_fsync_inode There is no functional change. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:48:15 +00:00
if (IS_ERR(entry)) {
err = PTR_ERR(entry);
f2fs: avoid wrong error during recovery During the roll-forward recovery, -ENOENT for f2fs_iget can be skipped. So, this error value should not be propagated. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-02-25 02:01:46 +00:00
if (err == -ENOENT) {
err = 0;
f2fs: fix roll-forward missing scenarios We can summarize the roll forward recovery scenarios as follows. [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) -> Update the latest inode(x). 2. inode(x) | CP | inode(F) | dnode(F) -> No problem. 3. inode(x) | CP | dnode(F) | inode(x) -> Recover to the latest dnode(F), and drop the last inode(x) 4. inode(x) | CP | dnode(F) | inode(F) -> No problem. 5. CP | inode(x) | dnode(F) -> The inode(DF) was missing. Should drop this dnode(F). 6. CP | inode(DF) | dnode(F) -> No problem. 7. CP | dnode(F) | inode(DF) -> If f2fs_iget fails, then goto next to find inode(DF). 8. CP | dnode(F) | inode(x) -> If f2fs_iget fails, then goto next to find inode(DF). But it will fail due to no inode(DF). So, this patch adds some missing points such as #1, #5, #7, and #8. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-15 23:46:08 +00:00
goto next;
f2fs: avoid wrong error during recovery During the roll-forward recovery, -ENOENT for f2fs_iget can be skipped. So, this error value should not be propagated. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-02-25 02:01:46 +00:00
}
f2fs: fix error path of recovery There are some places in where we missed to unlock page or unlock page incorrectly, fix them. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-10 10:45:26 +00:00
f2fs_put_page(page, 1);
f2fs: add debug msgs in the recovery routine This patch adds some trivial debugging messages in the recovery process. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-16 06:04:49 +00:00
break;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
}
f2fs: remove redundant assignment We don't need to assign a value redundantly. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-15 01:49:13 +00:00
entry->blkaddr = blkaddr;
f2fs: set fsync mark only for the last dnode In order to give atomic writes, we should consider power failure during sync_node_pages in fsync. So, this patch marks fsync flag only in the last dnode block. Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-15 16:43:17 +00:00
if (IS_INODE(page) && is_dent_dnode(page))
entry->last_dentry = blkaddr;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
next:
f2fs: fix to handle looped node chain during recovery There is no checksum in node block now, so bit-transition from hardware can make node_footer.next_blkaddr being corrupted w/o any detection, result in node chain becoming looped one. For this condition, during recovery, in order to avoid running into dead loop, let's detect it and just skip out. Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-02-03 09:44:39 +00:00
/* sanity check in order to detect looped node chain */
if (++loop_cnt >= free_blocks ||
blkaddr == next_blkaddr_of_node(page)) {
f2fs: introduce f2fs_<level> macros to wrap f2fs_printk() - Add and use f2fs_<level> macros - Convert f2fs_msg to f2fs_printk - Remove level from f2fs_printk and embed the level in the format - Coalesce formats and align multi-line arguments - Remove unnecessary duplicate extern f2fs_msg f2fs.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-18 09:48:42 +00:00
f2fs_notice(sbi, "%s: detect looped node chain, blkaddr:%u, next:%u",
__func__, blkaddr,
next_blkaddr_of_node(page));
f2fs: fix error path of recovery There are some places in where we missed to unlock page or unlock page incorrectly, fix them. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-10 10:45:26 +00:00
f2fs_put_page(page, 1);
f2fs: fix to handle looped node chain during recovery There is no checksum in node block now, so bit-transition from hardware can make node_footer.next_blkaddr being corrupted w/o any detection, result in node chain becoming looped one. For this condition, during recovery, in order to avoid running into dead loop, let's detect it and just skip out. Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-02-03 09:44:39 +00:00
err = -EINVAL;
break;
}
f2fs: adjust readahead block number during recovery In a fragmented image, entries in dnode block list may locate in incontiguous physical block address space, however, in recovery flow, we will always readahead BIO_MAX_VECS size blocks, so in such case, current readahead policy is low efficient, let's adjust readahead window size dynamically based on consecutiveness of dnode blocks. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-02-04 00:34:10 +00:00
ra_blocks = adjust_por_ra_blocks(sbi, ra_blocks, blkaddr,
next_blkaddr_of_node(page));
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
/* check next segment */
blkaddr = next_blkaddr_of_node(page);
f2fs: use meta_inode cache to improve roll-forward speed Previously, all the dnode pages should be read during the roll-forward recovery. Even worsely, whole the chain was traversed twice. This patch removes that redundant and costly read operations by using page cache of meta_inode and readahead function as well. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 20:49:55 +00:00
f2fs_put_page(page, 1);
f2fs: avoid to ra unneeded blocks in recover flow To improve recovery speed, f2fs try to readahead many contiguous blocks in warm node segment, but for most time, abnormal power-off do not occur frequently, so when mount a normal power-off f2fs image, by contrary ra so many blocks and then invalid them will hurt the performance of mount. It's better to just ra the first next-block for normal condition. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-12-08 07:02:52 +00:00
f2fs: adjust readahead block number during recovery In a fragmented image, entries in dnode block list may locate in incontiguous physical block address space, however, in recovery flow, we will always readahead BIO_MAX_VECS size blocks, so in such case, current readahead policy is low efficient, let's adjust readahead window size dynamically based on consecutiveness of dnode blocks. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-02-04 00:34:10 +00:00
f2fs_ra_meta_pages_cond(sbi, blkaddr, ra_blocks);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
return err;
}
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 10:49:26 +00:00
static void destroy_fsync_dnodes(struct list_head *head, int drop)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
{
f2fs: use _safe() version of list_for_each This is calling list_del() inside a loop which is a problem when we try move to the next item on the list. I've converted it to use the _safe version. And also, as a cleanup, I've converted it to use list_for_each_entry instead of list_for_each. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-20 15:02:58 +00:00
struct fsync_inode_entry *entry, *tmp;
f2fs: factor out fsync inode entry operations Factor out fsync inode entry operations into {add,del}_fsync_inode. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-29 12:13:37 +00:00
list_for_each_entry_safe(entry, tmp, head, list)
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 10:49:26 +00:00
del_fsync_inode(entry, drop);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
f2fs: fix to handle do_recover_data errors This patch adds error handling codes of check_index_in_prev_nodes and its caller, do_recover_data. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:20:01 +00:00
static int check_index_in_prev_nodes(struct f2fs_sb_info *sbi,
f2fs: reuse the locked dnode page and its inode This patch fixes the following deadlock bug during the recovery. INFO: task mount:1322 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mount D ffffffff81125870 0 1322 1266 0x00000000 ffff8801207e39d8 0000000000000046 ffff88012ab1dee0 0000000000000046 ffff8801207e3a08 ffff880115903f40 ffff8801207e3fd8 ffff8801207e3fd8 ffff8801207e3fd8 ffff880115903f40 ffff8801207e39d8 ffff88012fc94520 Call Trace: [<ffffffff81125870>] ? __lock_page+0x70/0x70 [<ffffffff816a92d9>] schedule+0x29/0x70 [<ffffffff816a93af>] io_schedule+0x8f/0xd0 [<ffffffff8112587e>] sleep_on_page+0xe/0x20 [<ffffffff816a649a>] __wait_on_bit_lock+0x5a/0xc0 [<ffffffff81125867>] __lock_page+0x67/0x70 [<ffffffff8106c7b0>] ? autoremove_wake_function+0x40/0x40 [<ffffffff81126857>] find_lock_page+0x67/0x80 [<ffffffff8112698f>] find_or_create_page+0x3f/0xb0 [<ffffffffa03901a8>] ? sync_inode_page+0xa8/0xd0 [f2fs] [<ffffffffa038fdf7>] get_node_page+0x67/0x180 [f2fs] [<ffffffffa039818b>] recover_fsync_data+0xacb/0xff0 [f2fs] [<ffffffff816aaa1e>] ? _raw_spin_unlock+0x3e/0x40 [<ffffffffa0389634>] f2fs_fill_super+0x7d4/0x850 [f2fs] [<ffffffff81184cf9>] mount_bdev+0x1c9/0x210 [<ffffffffa0388e60>] ? validate_superblock+0x180/0x180 [f2fs] [<ffffffffa0387635>] f2fs_mount+0x15/0x20 [f2fs] [<ffffffff81185a13>] mount_fs+0x43/0x1b0 [<ffffffff81145ba0>] ? __alloc_percpu+0x10/0x20 [<ffffffff811a0796>] vfs_kern_mount+0x76/0x120 [<ffffffff811a2cb7>] do_mount+0x237/0xa10 [<ffffffff81140b9b>] ? strndup_user+0x5b/0x80 [<ffffffff811a3520>] SyS_mount+0x90/0xe0 [<ffffffff816b3502>] system_call_fastpath+0x16/0x1b The bug is triggered when check_index_in_prev_nodes tries to get the direct node page by calling get_node_page. At this point, if the direct node page is already locked by get_dnode_of_data, its caller, we got a deadlock condition. This patch adds additional condition check for the reuse of locked direct node pages prior to the get_node_page call. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:02:02 +00:00
block_t blkaddr, struct dnode_of_data *dn)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
{
struct seg_entry *sentry;
unsigned int segno = GET_SEGNO(sbi, blkaddr);
f2fs: clean up with a macro This patch adds GET_BLKOFF_FROM_SEG0 to clean up some codes. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-02-04 04:01:10 +00:00
unsigned short blkoff = GET_BLKOFF_FROM_SEG0(sbi, blkaddr);
f2fs: fix a build warning This patch modifies flow a little bit to avoid the following build warnings. src/fs/f2fs/recovery.c: In function ‘check_index_in_prev_nodes’: src/fs/f2fs/recovery.c:288:51: warning: ‘sum.<U5390>.<U52f8>.ofs_in_node’ may be used uninitialized in this function [-Wmaybe-uninitialized] src/fs/f2fs/recovery.c:260:23: warning: ‘sum.nid’ may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-28 05:54:07 +00:00
struct f2fs_summary_block *sum_node;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
struct f2fs_summary sum;
f2fs: fix a build warning This patch modifies flow a little bit to avoid the following build warnings. src/fs/f2fs/recovery.c: In function ‘check_index_in_prev_nodes’: src/fs/f2fs/recovery.c:288:51: warning: ‘sum.<U5390>.<U52f8>.ofs_in_node’ may be used uninitialized in this function [-Wmaybe-uninitialized] src/fs/f2fs/recovery.c:260:23: warning: ‘sum.nid’ may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-28 05:54:07 +00:00
struct page *sum_page, *node_page;
f2fs: fix mismatching lock and unlock pages for roll-forward recovery Previously, inode page is not correctly locked and unlocked in pair during the roll-forward recovery. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-27 01:46:38 +00:00
struct dnode_of_data tdn = *dn;
f2fs: reuse the locked dnode page and its inode This patch fixes the following deadlock bug during the recovery. INFO: task mount:1322 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mount D ffffffff81125870 0 1322 1266 0x00000000 ffff8801207e39d8 0000000000000046 ffff88012ab1dee0 0000000000000046 ffff8801207e3a08 ffff880115903f40 ffff8801207e3fd8 ffff8801207e3fd8 ffff8801207e3fd8 ffff880115903f40 ffff8801207e39d8 ffff88012fc94520 Call Trace: [<ffffffff81125870>] ? __lock_page+0x70/0x70 [<ffffffff816a92d9>] schedule+0x29/0x70 [<ffffffff816a93af>] io_schedule+0x8f/0xd0 [<ffffffff8112587e>] sleep_on_page+0xe/0x20 [<ffffffff816a649a>] __wait_on_bit_lock+0x5a/0xc0 [<ffffffff81125867>] __lock_page+0x67/0x70 [<ffffffff8106c7b0>] ? autoremove_wake_function+0x40/0x40 [<ffffffff81126857>] find_lock_page+0x67/0x80 [<ffffffff8112698f>] find_or_create_page+0x3f/0xb0 [<ffffffffa03901a8>] ? sync_inode_page+0xa8/0xd0 [f2fs] [<ffffffffa038fdf7>] get_node_page+0x67/0x180 [f2fs] [<ffffffffa039818b>] recover_fsync_data+0xacb/0xff0 [f2fs] [<ffffffff816aaa1e>] ? _raw_spin_unlock+0x3e/0x40 [<ffffffffa0389634>] f2fs_fill_super+0x7d4/0x850 [f2fs] [<ffffffff81184cf9>] mount_bdev+0x1c9/0x210 [<ffffffffa0388e60>] ? validate_superblock+0x180/0x180 [f2fs] [<ffffffffa0387635>] f2fs_mount+0x15/0x20 [f2fs] [<ffffffff81185a13>] mount_fs+0x43/0x1b0 [<ffffffff81145ba0>] ? __alloc_percpu+0x10/0x20 [<ffffffff811a0796>] vfs_kern_mount+0x76/0x120 [<ffffffff811a2cb7>] do_mount+0x237/0xa10 [<ffffffff81140b9b>] ? strndup_user+0x5b/0x80 [<ffffffff811a3520>] SyS_mount+0x90/0xe0 [<ffffffff816b3502>] system_call_fastpath+0x16/0x1b The bug is triggered when check_index_in_prev_nodes tries to get the direct node page by calling get_node_page. At this point, if the direct node page is already locked by get_dnode_of_data, its caller, we got a deadlock condition. This patch adds additional condition check for the reuse of locked direct node pages prior to the get_node_page call. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:02:02 +00:00
nid_t ino, nid;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
struct inode *inode;
f2fs: fix to do sanity check on summary info As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216456 BUG: KASAN: use-after-free in recover_data+0x63ae/0x6ae0 [f2fs] Read of size 4 at addr ffff8881464dcd80 by task mount/1013 CPU: 3 PID: 1013 Comm: mount Tainted: G W 6.0.0-rc4 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: dump_stack_lvl+0x45/0x5e print_report.cold+0xf3/0x68d kasan_report+0xa8/0x130 recover_data+0x63ae/0x6ae0 [f2fs] f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs] f2fs_fill_super+0x4665/0x61e0 [f2fs] mount_bdev+0x2cf/0x3b0 legacy_get_tree+0xed/0x1d0 vfs_get_tree+0x81/0x2b0 path_mount+0x47e/0x19d0 do_mount+0xce/0xf0 __x64_sys_mount+0x12c/0x1a0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: in fuzzed image, SSA table is corrupted: ofs_in_node is larger than ADDRS_PER_PAGE(), result in out-of-range access on 4k-size page. - recover_data - do_recover_data - check_index_in_prev_nodes - f2fs_data_blkaddr This patch adds sanity check on summary info in recovery and GC flow in where the flows rely on them. After patch: [ 29.310883] F2FS-fs (loop0): Inconsistent ofs_in_node:65286 in summary, ino:0, nid:6, max:1018 Cc: stable@vger.kernel.org Reported-by: Wenqing Liu <wenqingliu0120@gmail.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-09-14 11:51:51 +00:00
unsigned int offset, ofs_in_node, max_addrs;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
block_t bidx;
int i;
sentry = get_seg_entry(sbi, segno);
if (!f2fs_test_bit(blkoff, sentry->cur_valid_map))
f2fs: fix to handle do_recover_data errors This patch adds error handling codes of check_index_in_prev_nodes and its caller, do_recover_data. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:20:01 +00:00
return 0;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
/* Get the previous summary */
f2fs: check hot_data for roll-forward recovery We need to check HOT_DATA to truncate any previous data block when doing roll-forward recovery. Cc: <stable@vger.kernel.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-13 04:33:23 +00:00
for (i = CURSEG_HOT_DATA; i <= CURSEG_COLD_DATA; i++) {
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
struct curseg_info *curseg = CURSEG_I(sbi, i);
f2fs: clean up build warnings This patch combined the below three clean-up patches. - modify open brace '{' following function definitions - ERROR: spaces required around that ':' - ERROR: spaces required before the open parenthesis '(' - ERROR: spaces prohibited before that ',' - Made suggested modifications from checkpatch in reference to WARNING: Missing a blank line after declarations Signed-off-by: Yi Zhuang <zhuangyi1@huawei.com> Signed-off-by: Jia Yang <jiayang5@huawei.com> Signed-off-by: Jack Qiu <jack.qiu@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-04-06 01:47:35 +00:00
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
if (curseg->segno == segno) {
sum = curseg->sum_blk->entries[blkoff];
f2fs: fix a build warning This patch modifies flow a little bit to avoid the following build warnings. src/fs/f2fs/recovery.c: In function ‘check_index_in_prev_nodes’: src/fs/f2fs/recovery.c:288:51: warning: ‘sum.<U5390>.<U52f8>.ofs_in_node’ may be used uninitialized in this function [-Wmaybe-uninitialized] src/fs/f2fs/recovery.c:260:23: warning: ‘sum.nid’ may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-28 05:54:07 +00:00
goto got_it;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
}
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
sum_page = f2fs_get_sum_page(sbi, segno);
f2fs: avoid f2fs_bug_on if f2fs_get_meta_page_nofail got EIO This patch avoids BUG_ON when f2fs_get_meta_page_nofail got EIO during xfstests/generic/475. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-18 00:36:06 +00:00
if (IS_ERR(sum_page))
return PTR_ERR(sum_page);
f2fs: fix a build warning This patch modifies flow a little bit to avoid the following build warnings. src/fs/f2fs/recovery.c: In function ‘check_index_in_prev_nodes’: src/fs/f2fs/recovery.c:288:51: warning: ‘sum.<U5390>.<U52f8>.ofs_in_node’ may be used uninitialized in this function [-Wmaybe-uninitialized] src/fs/f2fs/recovery.c:260:23: warning: ‘sum.nid’ may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-28 05:54:07 +00:00
sum_node = (struct f2fs_summary_block *)page_address(sum_page);
sum = sum_node->entries[blkoff];
f2fs_put_page(sum_page, 1);
got_it:
f2fs: reuse the locked dnode page and its inode This patch fixes the following deadlock bug during the recovery. INFO: task mount:1322 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mount D ffffffff81125870 0 1322 1266 0x00000000 ffff8801207e39d8 0000000000000046 ffff88012ab1dee0 0000000000000046 ffff8801207e3a08 ffff880115903f40 ffff8801207e3fd8 ffff8801207e3fd8 ffff8801207e3fd8 ffff880115903f40 ffff8801207e39d8 ffff88012fc94520 Call Trace: [<ffffffff81125870>] ? __lock_page+0x70/0x70 [<ffffffff816a92d9>] schedule+0x29/0x70 [<ffffffff816a93af>] io_schedule+0x8f/0xd0 [<ffffffff8112587e>] sleep_on_page+0xe/0x20 [<ffffffff816a649a>] __wait_on_bit_lock+0x5a/0xc0 [<ffffffff81125867>] __lock_page+0x67/0x70 [<ffffffff8106c7b0>] ? autoremove_wake_function+0x40/0x40 [<ffffffff81126857>] find_lock_page+0x67/0x80 [<ffffffff8112698f>] find_or_create_page+0x3f/0xb0 [<ffffffffa03901a8>] ? sync_inode_page+0xa8/0xd0 [f2fs] [<ffffffffa038fdf7>] get_node_page+0x67/0x180 [f2fs] [<ffffffffa039818b>] recover_fsync_data+0xacb/0xff0 [f2fs] [<ffffffff816aaa1e>] ? _raw_spin_unlock+0x3e/0x40 [<ffffffffa0389634>] f2fs_fill_super+0x7d4/0x850 [f2fs] [<ffffffff81184cf9>] mount_bdev+0x1c9/0x210 [<ffffffffa0388e60>] ? validate_superblock+0x180/0x180 [f2fs] [<ffffffffa0387635>] f2fs_mount+0x15/0x20 [f2fs] [<ffffffff81185a13>] mount_fs+0x43/0x1b0 [<ffffffff81145ba0>] ? __alloc_percpu+0x10/0x20 [<ffffffff811a0796>] vfs_kern_mount+0x76/0x120 [<ffffffff811a2cb7>] do_mount+0x237/0xa10 [<ffffffff81140b9b>] ? strndup_user+0x5b/0x80 [<ffffffff811a3520>] SyS_mount+0x90/0xe0 [<ffffffff816b3502>] system_call_fastpath+0x16/0x1b The bug is triggered when check_index_in_prev_nodes tries to get the direct node page by calling get_node_page. At this point, if the direct node page is already locked by get_dnode_of_data, its caller, we got a deadlock condition. This patch adds additional condition check for the reuse of locked direct node pages prior to the get_node_page call. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:02:02 +00:00
/* Use the locked dnode page and inode */
nid = le32_to_cpu(sum.nid);
f2fs: fix to do sanity check on summary info As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216456 BUG: KASAN: use-after-free in recover_data+0x63ae/0x6ae0 [f2fs] Read of size 4 at addr ffff8881464dcd80 by task mount/1013 CPU: 3 PID: 1013 Comm: mount Tainted: G W 6.0.0-rc4 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: dump_stack_lvl+0x45/0x5e print_report.cold+0xf3/0x68d kasan_report+0xa8/0x130 recover_data+0x63ae/0x6ae0 [f2fs] f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs] f2fs_fill_super+0x4665/0x61e0 [f2fs] mount_bdev+0x2cf/0x3b0 legacy_get_tree+0xed/0x1d0 vfs_get_tree+0x81/0x2b0 path_mount+0x47e/0x19d0 do_mount+0xce/0xf0 __x64_sys_mount+0x12c/0x1a0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: in fuzzed image, SSA table is corrupted: ofs_in_node is larger than ADDRS_PER_PAGE(), result in out-of-range access on 4k-size page. - recover_data - do_recover_data - check_index_in_prev_nodes - f2fs_data_blkaddr This patch adds sanity check on summary info in recovery and GC flow in where the flows rely on them. After patch: [ 29.310883] F2FS-fs (loop0): Inconsistent ofs_in_node:65286 in summary, ino:0, nid:6, max:1018 Cc: stable@vger.kernel.org Reported-by: Wenqing Liu <wenqingliu0120@gmail.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-09-14 11:51:51 +00:00
ofs_in_node = le16_to_cpu(sum.ofs_in_node);
max_addrs = ADDRS_PER_PAGE(dn->node_page, dn->inode);
if (ofs_in_node >= max_addrs) {
f2fs_err(sbi, "Inconsistent ofs_in_node:%u in summary, ino:%lu, nid:%u, max:%u",
ofs_in_node, dn->inode->i_ino, nid, max_addrs);
f2fs: support recording errors into superblock This patch supports to record detail reason of FSCORRUPTED error into f2fs_super_block.s_errors[]. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-09-28 15:38:54 +00:00
f2fs_handle_error(sbi, ERROR_INCONSISTENT_SUMMARY);
f2fs: fix to do sanity check on summary info As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216456 BUG: KASAN: use-after-free in recover_data+0x63ae/0x6ae0 [f2fs] Read of size 4 at addr ffff8881464dcd80 by task mount/1013 CPU: 3 PID: 1013 Comm: mount Tainted: G W 6.0.0-rc4 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: dump_stack_lvl+0x45/0x5e print_report.cold+0xf3/0x68d kasan_report+0xa8/0x130 recover_data+0x63ae/0x6ae0 [f2fs] f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs] f2fs_fill_super+0x4665/0x61e0 [f2fs] mount_bdev+0x2cf/0x3b0 legacy_get_tree+0xed/0x1d0 vfs_get_tree+0x81/0x2b0 path_mount+0x47e/0x19d0 do_mount+0xce/0xf0 __x64_sys_mount+0x12c/0x1a0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: in fuzzed image, SSA table is corrupted: ofs_in_node is larger than ADDRS_PER_PAGE(), result in out-of-range access on 4k-size page. - recover_data - do_recover_data - check_index_in_prev_nodes - f2fs_data_blkaddr This patch adds sanity check on summary info in recovery and GC flow in where the flows rely on them. After patch: [ 29.310883] F2FS-fs (loop0): Inconsistent ofs_in_node:65286 in summary, ino:0, nid:6, max:1018 Cc: stable@vger.kernel.org Reported-by: Wenqing Liu <wenqingliu0120@gmail.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-09-14 11:51:51 +00:00
return -EFSCORRUPTED;
}
f2fs: reuse the locked dnode page and its inode This patch fixes the following deadlock bug during the recovery. INFO: task mount:1322 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mount D ffffffff81125870 0 1322 1266 0x00000000 ffff8801207e39d8 0000000000000046 ffff88012ab1dee0 0000000000000046 ffff8801207e3a08 ffff880115903f40 ffff8801207e3fd8 ffff8801207e3fd8 ffff8801207e3fd8 ffff880115903f40 ffff8801207e39d8 ffff88012fc94520 Call Trace: [<ffffffff81125870>] ? __lock_page+0x70/0x70 [<ffffffff816a92d9>] schedule+0x29/0x70 [<ffffffff816a93af>] io_schedule+0x8f/0xd0 [<ffffffff8112587e>] sleep_on_page+0xe/0x20 [<ffffffff816a649a>] __wait_on_bit_lock+0x5a/0xc0 [<ffffffff81125867>] __lock_page+0x67/0x70 [<ffffffff8106c7b0>] ? autoremove_wake_function+0x40/0x40 [<ffffffff81126857>] find_lock_page+0x67/0x80 [<ffffffff8112698f>] find_or_create_page+0x3f/0xb0 [<ffffffffa03901a8>] ? sync_inode_page+0xa8/0xd0 [f2fs] [<ffffffffa038fdf7>] get_node_page+0x67/0x180 [f2fs] [<ffffffffa039818b>] recover_fsync_data+0xacb/0xff0 [f2fs] [<ffffffff816aaa1e>] ? _raw_spin_unlock+0x3e/0x40 [<ffffffffa0389634>] f2fs_fill_super+0x7d4/0x850 [f2fs] [<ffffffff81184cf9>] mount_bdev+0x1c9/0x210 [<ffffffffa0388e60>] ? validate_superblock+0x180/0x180 [f2fs] [<ffffffffa0387635>] f2fs_mount+0x15/0x20 [f2fs] [<ffffffff81185a13>] mount_fs+0x43/0x1b0 [<ffffffff81145ba0>] ? __alloc_percpu+0x10/0x20 [<ffffffff811a0796>] vfs_kern_mount+0x76/0x120 [<ffffffff811a2cb7>] do_mount+0x237/0xa10 [<ffffffff81140b9b>] ? strndup_user+0x5b/0x80 [<ffffffff811a3520>] SyS_mount+0x90/0xe0 [<ffffffff816b3502>] system_call_fastpath+0x16/0x1b The bug is triggered when check_index_in_prev_nodes tries to get the direct node page by calling get_node_page. At this point, if the direct node page is already locked by get_dnode_of_data, its caller, we got a deadlock condition. This patch adds additional condition check for the reuse of locked direct node pages prior to the get_node_page call. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:02:02 +00:00
if (dn->inode->i_ino == nid) {
tdn.nid = nid;
f2fs: fix mismatching lock and unlock pages for roll-forward recovery Previously, inode page is not correctly locked and unlocked in pair during the roll-forward recovery. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-27 01:46:38 +00:00
if (!dn->inode_page_locked)
lock_page(dn->inode_page);
f2fs: reuse the locked dnode page and its inode This patch fixes the following deadlock bug during the recovery. INFO: task mount:1322 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mount D ffffffff81125870 0 1322 1266 0x00000000 ffff8801207e39d8 0000000000000046 ffff88012ab1dee0 0000000000000046 ffff8801207e3a08 ffff880115903f40 ffff8801207e3fd8 ffff8801207e3fd8 ffff8801207e3fd8 ffff880115903f40 ffff8801207e39d8 ffff88012fc94520 Call Trace: [<ffffffff81125870>] ? __lock_page+0x70/0x70 [<ffffffff816a92d9>] schedule+0x29/0x70 [<ffffffff816a93af>] io_schedule+0x8f/0xd0 [<ffffffff8112587e>] sleep_on_page+0xe/0x20 [<ffffffff816a649a>] __wait_on_bit_lock+0x5a/0xc0 [<ffffffff81125867>] __lock_page+0x67/0x70 [<ffffffff8106c7b0>] ? autoremove_wake_function+0x40/0x40 [<ffffffff81126857>] find_lock_page+0x67/0x80 [<ffffffff8112698f>] find_or_create_page+0x3f/0xb0 [<ffffffffa03901a8>] ? sync_inode_page+0xa8/0xd0 [f2fs] [<ffffffffa038fdf7>] get_node_page+0x67/0x180 [f2fs] [<ffffffffa039818b>] recover_fsync_data+0xacb/0xff0 [f2fs] [<ffffffff816aaa1e>] ? _raw_spin_unlock+0x3e/0x40 [<ffffffffa0389634>] f2fs_fill_super+0x7d4/0x850 [f2fs] [<ffffffff81184cf9>] mount_bdev+0x1c9/0x210 [<ffffffffa0388e60>] ? validate_superblock+0x180/0x180 [f2fs] [<ffffffffa0387635>] f2fs_mount+0x15/0x20 [f2fs] [<ffffffff81185a13>] mount_fs+0x43/0x1b0 [<ffffffff81145ba0>] ? __alloc_percpu+0x10/0x20 [<ffffffff811a0796>] vfs_kern_mount+0x76/0x120 [<ffffffff811a2cb7>] do_mount+0x237/0xa10 [<ffffffff81140b9b>] ? strndup_user+0x5b/0x80 [<ffffffff811a3520>] SyS_mount+0x90/0xe0 [<ffffffff816b3502>] system_call_fastpath+0x16/0x1b The bug is triggered when check_index_in_prev_nodes tries to get the direct node page by calling get_node_page. At this point, if the direct node page is already locked by get_dnode_of_data, its caller, we got a deadlock condition. This patch adds additional condition check for the reuse of locked direct node pages prior to the get_node_page call. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:02:02 +00:00
tdn.node_page = dn->inode_page;
f2fs: fix to do sanity check on summary info As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216456 BUG: KASAN: use-after-free in recover_data+0x63ae/0x6ae0 [f2fs] Read of size 4 at addr ffff8881464dcd80 by task mount/1013 CPU: 3 PID: 1013 Comm: mount Tainted: G W 6.0.0-rc4 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: dump_stack_lvl+0x45/0x5e print_report.cold+0xf3/0x68d kasan_report+0xa8/0x130 recover_data+0x63ae/0x6ae0 [f2fs] f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs] f2fs_fill_super+0x4665/0x61e0 [f2fs] mount_bdev+0x2cf/0x3b0 legacy_get_tree+0xed/0x1d0 vfs_get_tree+0x81/0x2b0 path_mount+0x47e/0x19d0 do_mount+0xce/0xf0 __x64_sys_mount+0x12c/0x1a0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: in fuzzed image, SSA table is corrupted: ofs_in_node is larger than ADDRS_PER_PAGE(), result in out-of-range access on 4k-size page. - recover_data - do_recover_data - check_index_in_prev_nodes - f2fs_data_blkaddr This patch adds sanity check on summary info in recovery and GC flow in where the flows rely on them. After patch: [ 29.310883] F2FS-fs (loop0): Inconsistent ofs_in_node:65286 in summary, ino:0, nid:6, max:1018 Cc: stable@vger.kernel.org Reported-by: Wenqing Liu <wenqingliu0120@gmail.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-09-14 11:51:51 +00:00
tdn.ofs_in_node = ofs_in_node;
f2fs: fix mismatching lock and unlock pages for roll-forward recovery Previously, inode page is not correctly locked and unlocked in pair during the roll-forward recovery. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-27 01:46:38 +00:00
goto truncate_out;
f2fs: reuse the locked dnode page and its inode This patch fixes the following deadlock bug during the recovery. INFO: task mount:1322 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mount D ffffffff81125870 0 1322 1266 0x00000000 ffff8801207e39d8 0000000000000046 ffff88012ab1dee0 0000000000000046 ffff8801207e3a08 ffff880115903f40 ffff8801207e3fd8 ffff8801207e3fd8 ffff8801207e3fd8 ffff880115903f40 ffff8801207e39d8 ffff88012fc94520 Call Trace: [<ffffffff81125870>] ? __lock_page+0x70/0x70 [<ffffffff816a92d9>] schedule+0x29/0x70 [<ffffffff816a93af>] io_schedule+0x8f/0xd0 [<ffffffff8112587e>] sleep_on_page+0xe/0x20 [<ffffffff816a649a>] __wait_on_bit_lock+0x5a/0xc0 [<ffffffff81125867>] __lock_page+0x67/0x70 [<ffffffff8106c7b0>] ? autoremove_wake_function+0x40/0x40 [<ffffffff81126857>] find_lock_page+0x67/0x80 [<ffffffff8112698f>] find_or_create_page+0x3f/0xb0 [<ffffffffa03901a8>] ? sync_inode_page+0xa8/0xd0 [f2fs] [<ffffffffa038fdf7>] get_node_page+0x67/0x180 [f2fs] [<ffffffffa039818b>] recover_fsync_data+0xacb/0xff0 [f2fs] [<ffffffff816aaa1e>] ? _raw_spin_unlock+0x3e/0x40 [<ffffffffa0389634>] f2fs_fill_super+0x7d4/0x850 [f2fs] [<ffffffff81184cf9>] mount_bdev+0x1c9/0x210 [<ffffffffa0388e60>] ? validate_superblock+0x180/0x180 [f2fs] [<ffffffffa0387635>] f2fs_mount+0x15/0x20 [f2fs] [<ffffffff81185a13>] mount_fs+0x43/0x1b0 [<ffffffff81145ba0>] ? __alloc_percpu+0x10/0x20 [<ffffffff811a0796>] vfs_kern_mount+0x76/0x120 [<ffffffff811a2cb7>] do_mount+0x237/0xa10 [<ffffffff81140b9b>] ? strndup_user+0x5b/0x80 [<ffffffff811a3520>] SyS_mount+0x90/0xe0 [<ffffffff816b3502>] system_call_fastpath+0x16/0x1b The bug is triggered when check_index_in_prev_nodes tries to get the direct node page by calling get_node_page. At this point, if the direct node page is already locked by get_dnode_of_data, its caller, we got a deadlock condition. This patch adds additional condition check for the reuse of locked direct node pages prior to the get_node_page call. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:02:02 +00:00
} else if (dn->nid == nid) {
f2fs: fix to do sanity check on summary info As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216456 BUG: KASAN: use-after-free in recover_data+0x63ae/0x6ae0 [f2fs] Read of size 4 at addr ffff8881464dcd80 by task mount/1013 CPU: 3 PID: 1013 Comm: mount Tainted: G W 6.0.0-rc4 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: dump_stack_lvl+0x45/0x5e print_report.cold+0xf3/0x68d kasan_report+0xa8/0x130 recover_data+0x63ae/0x6ae0 [f2fs] f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs] f2fs_fill_super+0x4665/0x61e0 [f2fs] mount_bdev+0x2cf/0x3b0 legacy_get_tree+0xed/0x1d0 vfs_get_tree+0x81/0x2b0 path_mount+0x47e/0x19d0 do_mount+0xce/0xf0 __x64_sys_mount+0x12c/0x1a0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: in fuzzed image, SSA table is corrupted: ofs_in_node is larger than ADDRS_PER_PAGE(), result in out-of-range access on 4k-size page. - recover_data - do_recover_data - check_index_in_prev_nodes - f2fs_data_blkaddr This patch adds sanity check on summary info in recovery and GC flow in where the flows rely on them. After patch: [ 29.310883] F2FS-fs (loop0): Inconsistent ofs_in_node:65286 in summary, ino:0, nid:6, max:1018 Cc: stable@vger.kernel.org Reported-by: Wenqing Liu <wenqingliu0120@gmail.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-09-14 11:51:51 +00:00
tdn.ofs_in_node = ofs_in_node;
f2fs: fix mismatching lock and unlock pages for roll-forward recovery Previously, inode page is not correctly locked and unlocked in pair during the roll-forward recovery. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-27 01:46:38 +00:00
goto truncate_out;
f2fs: reuse the locked dnode page and its inode This patch fixes the following deadlock bug during the recovery. INFO: task mount:1322 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mount D ffffffff81125870 0 1322 1266 0x00000000 ffff8801207e39d8 0000000000000046 ffff88012ab1dee0 0000000000000046 ffff8801207e3a08 ffff880115903f40 ffff8801207e3fd8 ffff8801207e3fd8 ffff8801207e3fd8 ffff880115903f40 ffff8801207e39d8 ffff88012fc94520 Call Trace: [<ffffffff81125870>] ? __lock_page+0x70/0x70 [<ffffffff816a92d9>] schedule+0x29/0x70 [<ffffffff816a93af>] io_schedule+0x8f/0xd0 [<ffffffff8112587e>] sleep_on_page+0xe/0x20 [<ffffffff816a649a>] __wait_on_bit_lock+0x5a/0xc0 [<ffffffff81125867>] __lock_page+0x67/0x70 [<ffffffff8106c7b0>] ? autoremove_wake_function+0x40/0x40 [<ffffffff81126857>] find_lock_page+0x67/0x80 [<ffffffff8112698f>] find_or_create_page+0x3f/0xb0 [<ffffffffa03901a8>] ? sync_inode_page+0xa8/0xd0 [f2fs] [<ffffffffa038fdf7>] get_node_page+0x67/0x180 [f2fs] [<ffffffffa039818b>] recover_fsync_data+0xacb/0xff0 [f2fs] [<ffffffff816aaa1e>] ? _raw_spin_unlock+0x3e/0x40 [<ffffffffa0389634>] f2fs_fill_super+0x7d4/0x850 [f2fs] [<ffffffff81184cf9>] mount_bdev+0x1c9/0x210 [<ffffffffa0388e60>] ? validate_superblock+0x180/0x180 [f2fs] [<ffffffffa0387635>] f2fs_mount+0x15/0x20 [f2fs] [<ffffffff81185a13>] mount_fs+0x43/0x1b0 [<ffffffff81145ba0>] ? __alloc_percpu+0x10/0x20 [<ffffffff811a0796>] vfs_kern_mount+0x76/0x120 [<ffffffff811a2cb7>] do_mount+0x237/0xa10 [<ffffffff81140b9b>] ? strndup_user+0x5b/0x80 [<ffffffff811a3520>] SyS_mount+0x90/0xe0 [<ffffffff816b3502>] system_call_fastpath+0x16/0x1b The bug is triggered when check_index_in_prev_nodes tries to get the direct node page by calling get_node_page. At this point, if the direct node page is already locked by get_dnode_of_data, its caller, we got a deadlock condition. This patch adds additional condition check for the reuse of locked direct node pages prior to the get_node_page call. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:02:02 +00:00
}
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
/* Get the node page */
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
node_page = f2fs_get_node_page(sbi, nid);
f2fs: fix to handle do_recover_data errors This patch adds error handling codes of check_index_in_prev_nodes and its caller, do_recover_data. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:20:01 +00:00
if (IS_ERR(node_page))
return PTR_ERR(node_page);
f2fs: reserve the xattr space dynamically This patch enables the number of direct pointers inside on-disk inode block to be changed dynamically according to the size of inline xattr space. The number of direct pointers, ADDRS_PER_INODE, can be changed only if the file has inline xattr flag. The number of direct pointers that will be used by inline xattrs is defined as F2FS_INLINE_XATTR_ADDRS. Current patch assigns F2FS_INLINE_XATTR_ADDRS to 0 temporarily. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-08-12 12:08:03 +00:00
offset = ofs_of_node(node_page);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
ino = ino_of_node(node_page);
f2fs_put_page(node_page, 1);
f2fs: fix double lock for inode page during roll-foward recovery If the inode is same and its data index are needed to truncate, we can fall into double lock for its inode page via get_dnode_of_data. Error case is like this. 1. write data 1, 2, 3, 4, 5 in inode #4. 2. write data 100, 102, 103, 104, 105 in dnode #6 of inode #4. 3. sync 4. update data 100->106 in dnode #6. 5. fsync inode #4. 6. power-cut -> Then, 1. go back to #3's checkpoint 2. in do_recover_data, get_dnode_of_data() gets inode #4. 3. detect 100->106 in dnode #6. 4. check_index_in_prev_nodes tries to truncate 100 in dnode #6. 5. to trigger truncate_hole, get_dnode_of_data should grab inode #4. 6. detect *kernel hang* This patch should resolve that bug. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-12 15:35:58 +00:00
if (ino != dn->inode->i_ino) {
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
int ret;
f2fs: fix double lock for inode page during roll-foward recovery If the inode is same and its data index are needed to truncate, we can fall into double lock for its inode page via get_dnode_of_data. Error case is like this. 1. write data 1, 2, 3, 4, 5 in inode #4. 2. write data 100, 102, 103, 104, 105 in dnode #6 of inode #4. 3. sync 4. update data 100->106 in dnode #6. 5. fsync inode #4. 6. power-cut -> Then, 1. go back to #3's checkpoint 2. in do_recover_data, get_dnode_of_data() gets inode #4. 3. detect 100->106 in dnode #6. 4. check_index_in_prev_nodes tries to truncate 100 in dnode #6. 5. to trigger truncate_hole, get_dnode_of_data should grab inode #4. 6. detect *kernel hang* This patch should resolve that bug. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-12 15:35:58 +00:00
/* Deallocate previous index in the node page */
f2fs: avoid ENOMEM during roll-forward recovery This patch gives another chances during roll-forward recovery regarding to -ENOMEM. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:59:39 +00:00
inode = f2fs_iget_retry(sbi->sb, ino);
f2fs: fix double lock for inode page during roll-foward recovery If the inode is same and its data index are needed to truncate, we can fall into double lock for its inode page via get_dnode_of_data. Error case is like this. 1. write data 1, 2, 3, 4, 5 in inode #4. 2. write data 100, 102, 103, 104, 105 in dnode #6 of inode #4. 3. sync 4. update data 100->106 in dnode #6. 5. fsync inode #4. 6. power-cut -> Then, 1. go back to #3's checkpoint 2. in do_recover_data, get_dnode_of_data() gets inode #4. 3. detect 100->106 in dnode #6. 4. check_index_in_prev_nodes tries to truncate 100 in dnode #6. 5. to trigger truncate_hole, get_dnode_of_data should grab inode #4. 6. detect *kernel hang* This patch should resolve that bug. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-12 15:35:58 +00:00
if (IS_ERR(inode))
return PTR_ERR(inode);
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
f2fs: support fault injection for dquot_initialize() This patch adds a new function f2fs_dquot_initialize() to wrap dquot_initialize(), and it supports to inject fault into f2fs_dquot_initialize() to simulate inner failure occurs in dquot_initialize(). Usage: a) echo 65536 > /sys/fs/f2fs/<dev>/inject_type or b) mount -o fault_type=65536 <dev> <mountpoint> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-10-28 13:03:05 +00:00
ret = f2fs_dquot_initialize(inode);
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
if (ret) {
iput(inode);
return ret;
}
f2fs: fix double lock for inode page during roll-foward recovery If the inode is same and its data index are needed to truncate, we can fall into double lock for its inode page via get_dnode_of_data. Error case is like this. 1. write data 1, 2, 3, 4, 5 in inode #4. 2. write data 100, 102, 103, 104, 105 in dnode #6 of inode #4. 3. sync 4. update data 100->106 in dnode #6. 5. fsync inode #4. 6. power-cut -> Then, 1. go back to #3's checkpoint 2. in do_recover_data, get_dnode_of_data() gets inode #4. 3. detect 100->106 in dnode #6. 4. check_index_in_prev_nodes tries to truncate 100 in dnode #6. 5. to trigger truncate_hole, get_dnode_of_data should grab inode #4. 6. detect *kernel hang* This patch should resolve that bug. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-12 15:35:58 +00:00
} else {
inode = dn->inode;
}
f2fs: handle error from f2fs_iget_nowait In case f2fs_iget_nowait returns error, it results in truncate_hole being called with 'error' value as inode pointer. There is no check in truncate_hole for valid inode, so it could result in crash due "invalid access to memory". Avoid this by handling error condition properly. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-22 03:09:43 +00:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
bidx = f2fs_start_bidx_of_node(offset, inode) +
le16_to_cpu(sum.ofs_in_node);
f2fs: reserve the xattr space dynamically This patch enables the number of direct pointers inside on-disk inode block to be changed dynamically according to the size of inline xattr space. The number of direct pointers, ADDRS_PER_INODE, can be changed only if the file has inline xattr flag. The number of direct pointers that will be used by inline xattrs is defined as F2FS_INLINE_XATTR_ADDRS. Current patch assigns F2FS_INLINE_XATTR_ADDRS to 0 temporarily. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-08-12 12:08:03 +00:00
f2fs: fix mismatching lock and unlock pages for roll-forward recovery Previously, inode page is not correctly locked and unlocked in pair during the roll-forward recovery. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-27 01:46:38 +00:00
/*
* if inode page is locked, unlock temporarily, but its reference
* count keeps alive.
*/
if (ino == dn->inode->i_ino && dn->inode_page_locked)
unlock_page(dn->inode_page);
set_new_dnode(&tdn, inode, NULL, NULL, 0);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
if (f2fs_get_dnode_of_data(&tdn, bidx, LOOKUP_NODE))
f2fs: fix mismatching lock and unlock pages for roll-forward recovery Previously, inode page is not correctly locked and unlocked in pair during the roll-forward recovery. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-27 01:46:38 +00:00
goto out;
if (tdn.data_blkaddr == blkaddr)
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
f2fs_truncate_data_blocks_range(&tdn, 1);
f2fs: fix mismatching lock and unlock pages for roll-forward recovery Previously, inode page is not correctly locked and unlocked in pair during the roll-forward recovery. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-27 01:46:38 +00:00
f2fs_put_dnode(&tdn);
out:
if (ino != dn->inode->i_ino)
f2fs: fix double lock for inode page during roll-foward recovery If the inode is same and its data index are needed to truncate, we can fall into double lock for its inode page via get_dnode_of_data. Error case is like this. 1. write data 1, 2, 3, 4, 5 in inode #4. 2. write data 100, 102, 103, 104, 105 in dnode #6 of inode #4. 3. sync 4. update data 100->106 in dnode #6. 5. fsync inode #4. 6. power-cut -> Then, 1. go back to #3's checkpoint 2. in do_recover_data, get_dnode_of_data() gets inode #4. 3. detect 100->106 in dnode #6. 4. check_index_in_prev_nodes tries to truncate 100 in dnode #6. 5. to trigger truncate_hole, get_dnode_of_data should grab inode #4. 6. detect *kernel hang* This patch should resolve that bug. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-12 15:35:58 +00:00
iput(inode);
f2fs: fix mismatching lock and unlock pages for roll-forward recovery Previously, inode page is not correctly locked and unlocked in pair during the roll-forward recovery. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-27 01:46:38 +00:00
else if (dn->inode_page_locked)
lock_page(dn->inode_page);
return 0;
truncate_out:
f2fs: clean up codes with {f2fs_,}data_blkaddr() - rename datablock_addr() to data_blkaddr(). - wrap data_blkaddr() with f2fs_data_blkaddr() to clean up parameters. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-02-14 09:44:10 +00:00
if (f2fs_data_blkaddr(&tdn) == blkaddr)
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
f2fs_truncate_data_blocks_range(&tdn, 1);
f2fs: fix mismatching lock and unlock pages for roll-forward recovery Previously, inode page is not correctly locked and unlocked in pair during the roll-forward recovery. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-27 01:46:38 +00:00
if (dn->inode->i_ino == nid && !dn->inode_page_locked)
unlock_page(dn->inode_page);
f2fs: fix to handle do_recover_data errors This patch adds error handling codes of check_index_in_prev_nodes and its caller, do_recover_data. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:20:01 +00:00
return 0;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
static int do_recover_data(struct f2fs_sb_info *sbi, struct inode *inode,
f2fs: remove unused parameter Commit d260081ccf37 ("f2fs: change recovery policy of xattr node block") removes the use of blkaddr, which is no longer used. So remove the parameter. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-22 10:23:40 +00:00
struct page *page)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
{
struct dnode_of_data dn;
struct node_info ni;
f2fs: remove unneeded pointer conversion There are redundant pointer conversion in following call stack: - at position a, inode was been converted to f2fs_file_info. - at position b, f2fs_file_info was been converted to inode again. - truncate_blocks(inode,..) - fi = F2FS_I(inode) ---a - ADDRS_PER_PAGE(node_page, fi) - addrs_per_inode(fi) - inode = &fi->vfs_inode ---b - f2fs_has_inline_xattr(inode) - fi = F2FS_I(inode) - is_inode_flag_set(fi,..) In order to avoid unneeded conversion, alter ADDRS_PER_PAGE and addrs_per_inode to acept parameter with type of inode pointer. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-26 07:39:35 +00:00
unsigned int start, end;
f2fs: add debug msgs in the recovery routine This patch adds some trivial debugging messages in the recovery process. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-16 06:04:49 +00:00
int err = 0, recovered = 0;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: fix to recover inline_xattr/data and blocks This patch fixes not to skip xattr recovery and inline xattr/data recovery order. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-08 06:49:17 +00:00
/* step 1: recover xattr */
if (IS_INODE(page)) {
f2fs: fix error path in do_recover_data() - don't panic kernel if f2fs_get_node_page() fails in f2fs_recover_inline_data() or f2fs_recover_inline_xattr(); - return error number of f2fs_truncate_blocks() to f2fs_recover_inline_data()'s caller; Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-06 10:23:36 +00:00
err = f2fs_recover_inline_xattr(inode, page);
if (err)
goto out;
f2fs: fix to recover inline_xattr/data and blocks This patch fixes not to skip xattr recovery and inline xattr/data recovery order. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-08 06:49:17 +00:00
} else if (f2fs_has_xattr_block(ofs_of_node(page))) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
err = f2fs_recover_xattr_data(inode, page);
f2fs: change recovery policy of xattr node block Currently, if we call fsync after updating the xattr date belongs to the file, f2fs needs to trigger checkpoint to keep xattr data consistent. But, this policy cause low performance as checkpoint will block most foreground operations and cause unneeded and unrelated IOs around checkpoint. This patch will reuse regular file recovery policy for xattr node block, so, we change to write xattr node block tagged with fsync flag to warm area instead of cold area, and during recovery, we search warm node chain for fsynced xattr block, and do the recovery. So, for below application IO pattern, performance can be improved obviously: - touch file - create/update/delete xattr entry in file - fsync file Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-08 09:39:45 +00:00
if (!err)
recovered++;
f2fs: add inline_data recovery routine This patch adds a inline_data recovery routine with the following policy. [prev.] [next] of inline_data flag o o -> recover inline_data o x -> remove inline_data, and then recover data blocks x o -> remove inline_data, and then recover inline_data x x -> recover data blocks Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-26 03:49:48 +00:00
goto out;
f2fs: fix to recover inline_xattr/data and blocks This patch fixes not to skip xattr recovery and inline xattr/data recovery order. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-08 06:49:17 +00:00
}
f2fs: add inline_data recovery routine This patch adds a inline_data recovery routine with the following policy. [prev.] [next] of inline_data flag o o -> recover inline_data o x -> remove inline_data, and then recover data blocks x o -> remove inline_data, and then recover inline_data x x -> recover data blocks Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-26 03:49:48 +00:00
f2fs: fix to recover inline_xattr/data and blocks This patch fixes not to skip xattr recovery and inline xattr/data recovery order. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-08 06:49:17 +00:00
/* step 2: recover inline data */
f2fs: fix error path in do_recover_data() - don't panic kernel if f2fs_get_node_page() fails in f2fs_recover_inline_data() or f2fs_recover_inline_xattr(); - return error number of f2fs_truncate_blocks() to f2fs_recover_inline_data()'s caller; Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-06 10:23:36 +00:00
err = f2fs_recover_inline_data(inode, page);
if (err) {
if (err == 1)
err = 0;
f2fs: fix to recover xattr node block If a new xattr node page was allocated and its inode is fsynced, we should recover the xattr node page during the roll-forward process after power-cut. But, previously, f2fs didn't handle that case, resulting in kernel panic as follows reported by Tom Li. BUG: unable to handle kernel paging request at ffffc9001c861a98 IP: [<ffffffffa0295236>] check_index_in_prev_nodes+0x86/0x2d0 [f2fs] Call Trace: [<ffffffff815ece9b>] ? printk+0x48/0x4a [<ffffffffa029626a>] recover_fsync_data+0xdca/0xf50 [f2fs] [<ffffffffa02873ae>] f2fs_fill_super+0x92e/0x970 [f2fs] [<ffffffff8112c9f8>] mount_bdev+0x1b8/0x200 [<ffffffffa0286a80>] ? f2fs_remount+0x130/0x130 [f2fs] [<ffffffffa0285e40>] f2fs_mount+0x10/0x20 [f2fs] [<ffffffff8112d4de>] mount_fs+0x3e/0x1b0 [<ffffffff810ef4eb>] ? __alloc_percpu+0xb/0x10 [<ffffffff8114761f>] vfs_kern_mount+0x6f/0x120 [<ffffffff811497b9>] do_mount+0x259/0xa90 [<ffffffff810ead1d>] ? memdup_user+0x3d/0x80 [<ffffffff810eadb3>] ? strndup_user+0x53/0x70 [<ffffffff8114a2c9>] SyS_mount+0x89/0xd0 [<ffffffff815feae2>] system_call_fastpath+0x16/0x1b This patch adds a recovery function of xattr node pages. Reported-by: Tom Li <biergaizi@members.fsf.org> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-28 03:25:06 +00:00
goto out;
f2fs: fix error path in do_recover_data() - don't panic kernel if f2fs_get_node_page() fails in f2fs_recover_inline_data() or f2fs_recover_inline_xattr(); - return error number of f2fs_truncate_blocks() to f2fs_recover_inline_data()'s caller; Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-06 10:23:36 +00:00
}
f2fs: fix to recover xattr node block If a new xattr node page was allocated and its inode is fsynced, we should recover the xattr node page during the roll-forward process after power-cut. But, previously, f2fs didn't handle that case, resulting in kernel panic as follows reported by Tom Li. BUG: unable to handle kernel paging request at ffffc9001c861a98 IP: [<ffffffffa0295236>] check_index_in_prev_nodes+0x86/0x2d0 [f2fs] Call Trace: [<ffffffff815ece9b>] ? printk+0x48/0x4a [<ffffffffa029626a>] recover_fsync_data+0xdca/0xf50 [f2fs] [<ffffffffa02873ae>] f2fs_fill_super+0x92e/0x970 [f2fs] [<ffffffff8112c9f8>] mount_bdev+0x1b8/0x200 [<ffffffffa0286a80>] ? f2fs_remount+0x130/0x130 [f2fs] [<ffffffffa0285e40>] f2fs_mount+0x10/0x20 [f2fs] [<ffffffff8112d4de>] mount_fs+0x3e/0x1b0 [<ffffffff810ef4eb>] ? __alloc_percpu+0xb/0x10 [<ffffffff8114761f>] vfs_kern_mount+0x6f/0x120 [<ffffffff811497b9>] do_mount+0x259/0xa90 [<ffffffff810ead1d>] ? memdup_user+0x3d/0x80 [<ffffffff810eadb3>] ? strndup_user+0x53/0x70 [<ffffffff8114a2c9>] SyS_mount+0x89/0xd0 [<ffffffff815feae2>] system_call_fastpath+0x16/0x1b This patch adds a recovery function of xattr node pages. Reported-by: Tom Li <biergaizi@members.fsf.org> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-28 03:25:06 +00:00
f2fs: fix to recover inline_xattr/data and blocks This patch fixes not to skip xattr recovery and inline xattr/data recovery order. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-08 06:49:17 +00:00
/* step 3: recover data indices */
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
start = f2fs_start_bidx_of_node(ofs_of_node(page), inode);
f2fs: remove unneeded pointer conversion There are redundant pointer conversion in following call stack: - at position a, inode was been converted to f2fs_file_info. - at position b, f2fs_file_info was been converted to inode again. - truncate_blocks(inode,..) - fi = F2FS_I(inode) ---a - ADDRS_PER_PAGE(node_page, fi) - addrs_per_inode(fi) - inode = &fi->vfs_inode ---b - f2fs_has_inline_xattr(inode) - fi = F2FS_I(inode) - is_inode_flag_set(fi,..) In order to avoid unneeded conversion, alter ADDRS_PER_PAGE and addrs_per_inode to acept parameter with type of inode pointer. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-01-26 07:39:35 +00:00
end = start + ADDRS_PER_PAGE(page, inode);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
set_new_dnode(&dn, inode, NULL, NULL, 0);
f2fs: avoid ENOMEM during roll-forward recovery This patch gives another chances during roll-forward recovery regarding to -ENOMEM. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:59:39 +00:00
retry_dn:
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
err = f2fs_get_dnode_of_data(&dn, start, ALLOC_NODE);
f2fs: avoid ENOMEM during roll-forward recovery This patch gives another chances during roll-forward recovery regarding to -ENOMEM. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:59:39 +00:00
if (err) {
if (err == -ENOMEM) {
mm: introduce memalloc_retry_wait() Various places in the kernel - largely in filesystems - respond to a memory allocation failure by looping around and re-trying. Some of these cannot conveniently use __GFP_NOFAIL, for reasons such as: - a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on - a need to check for the process being signalled between failures - the possibility that other recovery actions could be performed - the allocation is quite deep in support code, and passing down an extra flag to say if __GFP_NOFAIL is wanted would be clumsy. Many of these currently use congestion_wait() which (in almost all cases) simply waits the given timeout - congestion isn't tracked for most devices. It isn't clear what the best delay is for loops, but it is clear that the various filesystems shouldn't be responsible for choosing a timeout. This patch introduces memalloc_retry_wait() with takes on that responsibility. Code that wants to retry a memory allocation can call this function passing the GFP flags that were used. It will wait however is appropriate. For now, it only considers __GFP_NORETRY and whatever gfpflags_allow_blocking() tests. If blocking is allowed without __GFP_NORETRY, then alloc_page either made some reclaim progress, or waited for a while, before failing. So there is no need for much further waiting. memalloc_retry_wait() will wait until the current jiffie ends. If this condition is not met, then alloc_page() won't have waited much if at all. In that case memalloc_retry_wait() waits about 200ms. This is the delay that most current loops uses. linux/sched/mm.h needs to be included in some files now, but linux/backing-dev.h does not. Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Chao Yu <chao@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:07:14 +00:00
memalloc_retry_wait(GFP_NOFS);
f2fs: avoid ENOMEM during roll-forward recovery This patch gives another chances during roll-forward recovery regarding to -ENOMEM. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:59:39 +00:00
goto retry_dn;
}
f2fs: add inline_data recovery routine This patch adds a inline_data recovery routine with the following policy. [prev.] [next] of inline_data flag o o -> recover inline_data o x -> remove inline_data, and then recover data blocks x o -> remove inline_data, and then recover inline_data x x -> recover data blocks Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-26 03:49:48 +00:00
goto out;
f2fs: avoid ENOMEM during roll-forward recovery This patch gives another chances during roll-forward recovery regarding to -ENOMEM. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:59:39 +00:00
}
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: check PageWriteback flag for ordered case For all ordered cases in f2fs_wait_on_page_writeback(), we need to check PageWriteback status, so let's clean up to relocate the check into f2fs_wait_on_page_writeback(). Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-12-25 09:43:42 +00:00
f2fs_wait_on_page_writeback(dn.node_page, NODE, true, true);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: do not bother checkpoint by f2fs_get_node_info This patch tries to mitigate lock contention between f2fs_write_checkpoint and f2fs_get_node_info along with nat_tree_lock. The idea is, if checkpoint is currently running, other threads that try to grab nat_tree_lock would be better to wait for checkpoint. Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-12-13 22:16:32 +00:00
err = f2fs_get_node_info(sbi, dn.nid, &ni, false);
f2fs: fix to propagate error from __get_meta_page() If caller of __get_meta_page() can handle error, let's propagate error from __get_meta_page(). Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-07-16 16:02:17 +00:00
if (err)
goto err;
f2fs: need fsck.f2fs when f2fs_bug_on is triggered If any f2fs_bug_on is triggered, fsck.f2fs is needed. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-02 22:52:58 +00:00
f2fs_bug_on(sbi, ni.ino != ino_of_node(page));
f2fs: fix to avoid panic in do_recover_data() As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203227 - Overview When mounting the attached crafted image, following errors are reported. Additionally, it hangs on sync after trying to mount it. The image is intentionally fuzzed from a normal f2fs image for testing. Compile options for F2FS are as follows. CONFIG_F2FS_FS=y CONFIG_F2FS_STAT_FS=y CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y CONFIG_F2FS_CHECK_FS=y - Reproduces mkdir test mount -t f2fs tmp.img test sync - Messages kernel BUG at fs/f2fs/recovery.c:549! RIP: 0010:recover_data+0x167a/0x1780 Call Trace: f2fs_recover_fsync_data+0x613/0x710 f2fs_fill_super+0x1043/0x1aa0 mount_bdev+0x16d/0x1a0 mount_fs+0x4a/0x170 vfs_kern_mount+0x5d/0x100 do_mount+0x200/0xcf0 ksys_mount+0x79/0xc0 __x64_sys_mount+0x1c/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 During recovery, if ofs_of_node is inconsistent in between recovered node page and original checkpointed node page, let's just fail recovery instead of making kernel panic. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 07:28:37 +00:00
if (ofs_of_node(dn.node_page) != ofs_of_node(page)) {
f2fs: introduce f2fs_<level> macros to wrap f2fs_printk() - Add and use f2fs_<level> macros - Convert f2fs_msg to f2fs_printk - Remove level from f2fs_printk and embed the level in the format - Coalesce formats and align multi-line arguments - Remove unnecessary duplicate extern f2fs_msg f2fs.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-18 09:48:42 +00:00
f2fs_warn(sbi, "Inconsistent ofs_of_node, ino:%lu, ofs:%u, %u",
inode->i_ino, ofs_of_node(dn.node_page),
ofs_of_node(page));
f2fs: use generic EFSBADCRC/EFSCORRUPTED f2fs uses EFAULT as error number to indicate filesystem is corrupted all the time, but generic filesystems use EUCLEAN for such condition, we need to change to follow others. This patch adds two new macros as below to wrap more generic error code macros, and spread them in code. EFSBADCRC EBADMSG /* Bad CRC detected */ EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */ Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Chao Yu <yuchao0@huawei.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-20 03:36:14 +00:00
err = -EFSCORRUPTED;
f2fs: support recording errors into superblock This patch supports to record detail reason of FSCORRUPTED error into f2fs_super_block.s_errors[]. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-09-28 15:38:54 +00:00
f2fs_handle_error(sbi, ERROR_INCONSISTENT_FOOTER);
f2fs: fix to avoid panic in do_recover_data() As Jungyeon reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203227 - Overview When mounting the attached crafted image, following errors are reported. Additionally, it hangs on sync after trying to mount it. The image is intentionally fuzzed from a normal f2fs image for testing. Compile options for F2FS are as follows. CONFIG_F2FS_FS=y CONFIG_F2FS_STAT_FS=y CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y CONFIG_F2FS_CHECK_FS=y - Reproduces mkdir test mount -t f2fs tmp.img test sync - Messages kernel BUG at fs/f2fs/recovery.c:549! RIP: 0010:recover_data+0x167a/0x1780 Call Trace: f2fs_recover_fsync_data+0x613/0x710 f2fs_fill_super+0x1043/0x1aa0 mount_bdev+0x16d/0x1a0 mount_fs+0x4a/0x170 vfs_kern_mount+0x5d/0x100 do_mount+0x200/0xcf0 ksys_mount+0x79/0xc0 __x64_sys_mount+0x1c/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 During recovery, if ofs_of_node is inconsistent in between recovered node page and original checkpointed node page, let's just fail recovery instead of making kernel panic. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 07:28:37 +00:00
goto err;
}
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: recover invalid/reserved block address for fsynced file When testing with generic/101 in xfstests, error message outputed as below: --- tests/generic/101.out +++ results//generic/101.out.bad @@ -10,10 +10,14 @@ File foo content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * -0200000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0200000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb * 0372000 ... (Run 'diff -u tests/generic/101.out results/generic/101.out.bad' to see the entire diff) The test flow is like below: 1. pwrite foo -S 0xaa 0 64K 2. pwrite foo -S 0xbb 64K 61K 3. sync 4. truncate foo 64K 5. truncate foo 125K 6. fsync foo 7. flakey drop writes 8. umount After this test, we expect the data of recovered file will have the first 64k of data filling with value 0xaa and the next 61k of data filling with value 0x00 because we have fsynced it before dropping writes in dm. In f2fs, during recovering, we will only recover the valid block address in direct node page if it is marked as a fsynced dnode, but block address which means invalid/reserved (with value NULL_ADDR/NEW_ADDR) will not be recovered. So, the file recovered shows its incorrect data 0xbb in range of [61k, 125k]. In this patch, we fix to recover invalid/reserved block during recover flow. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-08-05 09:23:54 +00:00
for (; start < end; start++, dn.ofs_in_node++) {
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
block_t src, dest;
f2fs: clean up codes with {f2fs_,}data_blkaddr() - rename datablock_addr() to data_blkaddr(). - wrap data_blkaddr() with f2fs_data_blkaddr() to clean up parameters. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-02-14 09:44:10 +00:00
src = f2fs_data_blkaddr(&dn);
dest = data_blkaddr(dn.inode, page, dn.ofs_in_node);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: introduce DATA_GENERIC_ENHANCE Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check whether @blkaddr locates in main area or not. That check is weak, since the block address in range of main area can point to the address which is not valid in segment info table, and we can not detect such condition, we may suffer worse corruption as system continues running. So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check which trigger SIT bitmap check rather than only range check. This patch did below changes as wel: - set SBI_NEED_FSCK in f2fs_is_valid_blkaddr(). - get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid. - introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check. - spread blkaddr check in: * f2fs_get_node_info() * __read_out_blkaddrs() * f2fs_submit_page_read() * ra_data_block() * do_recover_data() This patch can fix bug reported from bugzilla below: https://bugzilla.kernel.org/show_bug.cgi?id=203215 https://bugzilla.kernel.org/show_bug.cgi?id=203223 https://bugzilla.kernel.org/show_bug.cgi?id=203231 https://bugzilla.kernel.org/show_bug.cgi?id=203235 https://bugzilla.kernel.org/show_bug.cgi?id=203241 = Update by Jaegeuk Kim = DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths. But, xfstest/generic/446 compalins some generated kernel messages saying invalid bitmap was detected when reading a block. The reaons is, when we get the block addresses from extent_cache, there is no lock to synchronize it from truncating the blocks in parallel. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 07:26:32 +00:00
if (__is_valid_data_blkaddr(src) &&
!f2fs_is_valid_blkaddr(sbi, src, META_POR)) {
f2fs: use generic EFSBADCRC/EFSCORRUPTED f2fs uses EFAULT as error number to indicate filesystem is corrupted all the time, but generic filesystems use EUCLEAN for such condition, we need to change to follow others. This patch adds two new macros as below to wrap more generic error code macros, and spread them in code. EFSBADCRC EBADMSG /* Bad CRC detected */ EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */ Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Chao Yu <yuchao0@huawei.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-20 03:36:14 +00:00
err = -EFSCORRUPTED;
f2fs: support recording errors into superblock This patch supports to record detail reason of FSCORRUPTED error into f2fs_super_block.s_errors[]. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-09-28 15:38:54 +00:00
f2fs_handle_error(sbi, ERROR_INVALID_BLKADDR);
f2fs: introduce DATA_GENERIC_ENHANCE Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check whether @blkaddr locates in main area or not. That check is weak, since the block address in range of main area can point to the address which is not valid in segment info table, and we can not detect such condition, we may suffer worse corruption as system continues running. So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check which trigger SIT bitmap check rather than only range check. This patch did below changes as wel: - set SBI_NEED_FSCK in f2fs_is_valid_blkaddr(). - get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid. - introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check. - spread blkaddr check in: * f2fs_get_node_info() * __read_out_blkaddrs() * f2fs_submit_page_read() * ra_data_block() * do_recover_data() This patch can fix bug reported from bugzilla below: https://bugzilla.kernel.org/show_bug.cgi?id=203215 https://bugzilla.kernel.org/show_bug.cgi?id=203223 https://bugzilla.kernel.org/show_bug.cgi?id=203231 https://bugzilla.kernel.org/show_bug.cgi?id=203235 https://bugzilla.kernel.org/show_bug.cgi?id=203241 = Update by Jaegeuk Kim = DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths. But, xfstest/generic/446 compalins some generated kernel messages saying invalid bitmap was detected when reading a block. The reaons is, when we get the block addresses from extent_cache, there is no lock to synchronize it from truncating the blocks in parallel. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 07:26:32 +00:00
goto err;
}
if (__is_valid_data_blkaddr(dest) &&
!f2fs_is_valid_blkaddr(sbi, dest, META_POR)) {
f2fs: use generic EFSBADCRC/EFSCORRUPTED f2fs uses EFAULT as error number to indicate filesystem is corrupted all the time, but generic filesystems use EUCLEAN for such condition, we need to change to follow others. This patch adds two new macros as below to wrap more generic error code macros, and spread them in code. EFSBADCRC EBADMSG /* Bad CRC detected */ EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */ Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Chao Yu <yuchao0@huawei.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-20 03:36:14 +00:00
err = -EFSCORRUPTED;
f2fs: support recording errors into superblock This patch supports to record detail reason of FSCORRUPTED error into f2fs_super_block.s_errors[]. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-09-28 15:38:54 +00:00
f2fs_handle_error(sbi, ERROR_INVALID_BLKADDR);
f2fs: introduce DATA_GENERIC_ENHANCE Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check whether @blkaddr locates in main area or not. That check is weak, since the block address in range of main area can point to the address which is not valid in segment info table, and we can not detect such condition, we may suffer worse corruption as system continues running. So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check which trigger SIT bitmap check rather than only range check. This patch did below changes as wel: - set SBI_NEED_FSCK in f2fs_is_valid_blkaddr(). - get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid. - introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check. - spread blkaddr check in: * f2fs_get_node_info() * __read_out_blkaddrs() * f2fs_submit_page_read() * ra_data_block() * do_recover_data() This patch can fix bug reported from bugzilla below: https://bugzilla.kernel.org/show_bug.cgi?id=203215 https://bugzilla.kernel.org/show_bug.cgi?id=203223 https://bugzilla.kernel.org/show_bug.cgi?id=203231 https://bugzilla.kernel.org/show_bug.cgi?id=203235 https://bugzilla.kernel.org/show_bug.cgi?id=203241 = Update by Jaegeuk Kim = DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths. But, xfstest/generic/446 compalins some generated kernel messages saying invalid bitmap was detected when reading a block. The reaons is, when we get the block addresses from extent_cache, there is no lock to synchronize it from truncating the blocks in parallel. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 07:26:32 +00:00
goto err;
}
f2fs: recover invalid/reserved block address for fsynced file When testing with generic/101 in xfstests, error message outputed as below: --- tests/generic/101.out +++ results//generic/101.out.bad @@ -10,10 +10,14 @@ File foo content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * -0200000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0200000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb * 0372000 ... (Run 'diff -u tests/generic/101.out results/generic/101.out.bad' to see the entire diff) The test flow is like below: 1. pwrite foo -S 0xaa 0 64K 2. pwrite foo -S 0xbb 64K 61K 3. sync 4. truncate foo 64K 5. truncate foo 125K 6. fsync foo 7. flakey drop writes 8. umount After this test, we expect the data of recovered file will have the first 64k of data filling with value 0xaa and the next 61k of data filling with value 0x00 because we have fsynced it before dropping writes in dm. In f2fs, during recovering, we will only recover the valid block address in direct node page if it is marked as a fsynced dnode, but block address which means invalid/reserved (with value NULL_ADDR/NEW_ADDR) will not be recovered. So, the file recovered shows its incorrect data 0xbb in range of [61k, 125k]. In this patch, we fix to recover invalid/reserved block during recover flow. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-08-05 09:23:54 +00:00
/* skip recovering if dest is the same as src */
if (src == dest)
continue;
/* dest is invalid, just invalidate src block */
if (dest == NULL_ADDR) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
f2fs_truncate_data_blocks_range(&dn, 1);
f2fs: recover invalid/reserved block address for fsynced file When testing with generic/101 in xfstests, error message outputed as below: --- tests/generic/101.out +++ results//generic/101.out.bad @@ -10,10 +10,14 @@ File foo content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * -0200000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0200000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb * 0372000 ... (Run 'diff -u tests/generic/101.out results/generic/101.out.bad' to see the entire diff) The test flow is like below: 1. pwrite foo -S 0xaa 0 64K 2. pwrite foo -S 0xbb 64K 61K 3. sync 4. truncate foo 64K 5. truncate foo 125K 6. fsync foo 7. flakey drop writes 8. umount After this test, we expect the data of recovered file will have the first 64k of data filling with value 0xaa and the next 61k of data filling with value 0x00 because we have fsynced it before dropping writes in dm. In f2fs, during recovering, we will only recover the valid block address in direct node page if it is marked as a fsynced dnode, but block address which means invalid/reserved (with value NULL_ADDR/NEW_ADDR) will not be recovered. So, the file recovered shows its incorrect data 0xbb in range of [61k, 125k]. In this patch, we fix to recover invalid/reserved block during recover flow. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-08-05 09:23:54 +00:00
continue;
}
f2fs: do not activate auto_recovery for fallocated i_size If a file needs to keep its i_size by fallocate, we need to turn off auto recovery during roll-forward recovery. This will resolve the below scenario. 1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4096" -c "fsync" 2. xfs_io -f /mnt/f2fs/file -c "falloc -k 4096 4096" -c "fsync" 3. md5sum /mnt/f2fs/file; 4. godown /mnt/f2fs/ 5. umount /mnt/f2fs/ 6. mount -t f2fs /dev/sdx /mnt/f2fs 7. md5sum /mnt/f2fs/file Reported-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-28 23:33:38 +00:00
if (!file_keep_isize(inode) &&
f2fs: fix to avoid overflow when left shifting page offset We use following method to calculate size with current page index: size = index << PAGE_SHIFT If type of index has only 32-bits size, left shifting will incur overflow, which makes result incorrect. So let's cast index with 64-bits type to avoid such issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-25 02:52:39 +00:00
(i_size_read(inode) <= ((loff_t)start << PAGE_SHIFT)))
f2fs_i_size_write(inode,
(loff_t)(start + 1) << PAGE_SHIFT);
f2fs: avoid unnecessary updating inode during fsync If roll-forward recovery can recover i_size, we don't need to update inode's metadata during fsync. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-21 03:42:37 +00:00
f2fs: recover invalid/reserved block address for fsynced file When testing with generic/101 in xfstests, error message outputed as below: --- tests/generic/101.out +++ results//generic/101.out.bad @@ -10,10 +10,14 @@ File foo content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * -0200000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0200000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb * 0372000 ... (Run 'diff -u tests/generic/101.out results/generic/101.out.bad' to see the entire diff) The test flow is like below: 1. pwrite foo -S 0xaa 0 64K 2. pwrite foo -S 0xbb 64K 61K 3. sync 4. truncate foo 64K 5. truncate foo 125K 6. fsync foo 7. flakey drop writes 8. umount After this test, we expect the data of recovered file will have the first 64k of data filling with value 0xaa and the next 61k of data filling with value 0x00 because we have fsynced it before dropping writes in dm. In f2fs, during recovering, we will only recover the valid block address in direct node page if it is marked as a fsynced dnode, but block address which means invalid/reserved (with value NULL_ADDR/NEW_ADDR) will not be recovered. So, the file recovered shows its incorrect data 0xbb in range of [61k, 125k]. In this patch, we fix to recover invalid/reserved block during recover flow. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-08-05 09:23:54 +00:00
/*
* dest is reserved block, invalidate src block
* and then reserve one new block in dnode page.
*/
if (dest == NEW_ADDR) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
f2fs_truncate_data_blocks_range(&dn, 1);
f2fs_reserve_new_block(&dn);
f2fs: recover invalid/reserved block address for fsynced file When testing with generic/101 in xfstests, error message outputed as below: --- tests/generic/101.out +++ results//generic/101.out.bad @@ -10,10 +10,14 @@ File foo content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * -0200000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0200000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb * 0372000 ... (Run 'diff -u tests/generic/101.out results/generic/101.out.bad' to see the entire diff) The test flow is like below: 1. pwrite foo -S 0xaa 0 64K 2. pwrite foo -S 0xbb 64K 61K 3. sync 4. truncate foo 64K 5. truncate foo 125K 6. fsync foo 7. flakey drop writes 8. umount After this test, we expect the data of recovered file will have the first 64k of data filling with value 0xaa and the next 61k of data filling with value 0x00 because we have fsynced it before dropping writes in dm. In f2fs, during recovering, we will only recover the valid block address in direct node page if it is marked as a fsynced dnode, but block address which means invalid/reserved (with value NULL_ADDR/NEW_ADDR) will not be recovered. So, the file recovered shows its incorrect data 0xbb in range of [61k, 125k]. In this patch, we fix to recover invalid/reserved block during recover flow. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-08-05 09:23:54 +00:00
continue;
}
/* dest is valid block, try to recover from src to dest */
f2fs: introduce and spread verify_blkaddr This patch introduces verify_blkaddr to check meta/data block address with valid range to detect bug earlier. In addition, once we encounter an invalid blkaddr, notice user to run fsck to fix, and let the kernel panic. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-05 09:44:11 +00:00
if (f2fs_is_valid_blkaddr(sbi, dest, META_POR)) {
f2fs: do not recover wrong data index During the roll-forward recovery, if we found a new data index written fsync lastly, we need to recover new block address. But, if that address was corrupted, we should not recover that. Otherwise, f2fs gets kernel panic from: In check_index_in_prev_nodes(), sentry = get_seg_entry(sbi, segno); --------------------------> out-of-range segno. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-04-02 02:38:20 +00:00
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
if (src == NULL_ADDR) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
err = f2fs_reserve_new_block(&dn);
f2fs: rework fault injection handling to avoid a warning When CONFIG_F2FS_FAULT_INJECTION is disabled, we get a warning about an unused label: fs/f2fs/segment.c: In function '__submit_discard_cmd': fs/f2fs/segment.c:1059:1: error: label 'submit' defined but not used [-Werror=unused-label] This could be fixed by adding another #ifdef around it, but the more reliable way of doing this seems to be to remove the other #ifdefs where that is easily possible. By defining time_to_inject() as a trivial stub, most of the checks for CONFIG_F2FS_FAULT_INJECTION can go away. This also leads to nicer formatting of the code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-13 21:38:06 +00:00
while (err &&
IS_ENABLED(CONFIG_F2FS_FAULT_INJECTION))
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
err = f2fs_reserve_new_block(&dn);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
/* We should not get -ENOSPC */
f2fs: need fsck.f2fs when f2fs_bug_on is triggered If any f2fs_bug_on is triggered, fsck.f2fs is needed. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-02 22:52:58 +00:00
f2fs_bug_on(sbi, err);
f2fs: handle error case with f2fs_bug_on It's enough to show BUG or WARN by f2fs_bug_on for error case. Then, we don't need to remain corrupted filesystem. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-07-20 02:30:06 +00:00
if (err)
goto err;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
f2fs: avoid ENOMEM during roll-forward recovery This patch gives another chances during roll-forward recovery regarding to -ENOMEM. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:59:39 +00:00
retry_prev:
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
/* Check the previous node page having this index */
f2fs: fix to handle do_recover_data errors This patch adds error handling codes of check_index_in_prev_nodes and its caller, do_recover_data. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:20:01 +00:00
err = check_index_in_prev_nodes(sbi, dest, &dn);
f2fs: avoid ENOMEM during roll-forward recovery This patch gives another chances during roll-forward recovery regarding to -ENOMEM. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:59:39 +00:00
if (err) {
if (err == -ENOMEM) {
mm: introduce memalloc_retry_wait() Various places in the kernel - largely in filesystems - respond to a memory allocation failure by looping around and re-trying. Some of these cannot conveniently use __GFP_NOFAIL, for reasons such as: - a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on - a need to check for the process being signalled between failures - the possibility that other recovery actions could be performed - the allocation is quite deep in support code, and passing down an extra flag to say if __GFP_NOFAIL is wanted would be clumsy. Many of these currently use congestion_wait() which (in almost all cases) simply waits the given timeout - congestion isn't tracked for most devices. It isn't clear what the best delay is for loops, but it is clear that the various filesystems shouldn't be responsible for choosing a timeout. This patch introduces memalloc_retry_wait() with takes on that responsibility. Code that wants to retry a memory allocation can call this function passing the GFP flags that were used. It will wait however is appropriate. For now, it only considers __GFP_NORETRY and whatever gfpflags_allow_blocking() tests. If blocking is allowed without __GFP_NORETRY, then alloc_page either made some reclaim progress, or waited for a while, before failing. So there is no need for much further waiting. memalloc_retry_wait() will wait until the current jiffie ends. If this condition is not met, then alloc_page() won't have waited much if at all. In that case memalloc_retry_wait() waits about 200ms. This is the delay that most current loops uses. linux/sched/mm.h needs to be included in some files now, but linux/backing-dev.h does not. Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Chao Yu <chao@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:07:14 +00:00
memalloc_retry_wait(GFP_NOFS);
f2fs: avoid ENOMEM during roll-forward recovery This patch gives another chances during roll-forward recovery regarding to -ENOMEM. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:59:39 +00:00
goto retry_prev;
}
f2fs: fix to handle do_recover_data errors This patch adds error handling codes of check_index_in_prev_nodes and its caller, do_recover_data. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:20:01 +00:00
goto err;
f2fs: avoid ENOMEM during roll-forward recovery This patch gives another chances during roll-forward recovery regarding to -ENOMEM. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-09 23:59:39 +00:00
}
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: fix to do sanity check on destination blkaddr during recovery As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216456 loop5: detected capacity change from 0 to 131072 F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1 F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0 F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1 F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0 F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1 F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0 F2FS-fs (loop5): Bitmap was wrongly set, blk:5634 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1013 at fs/f2fs/segment.c:2198 RIP: 0010:update_sit_entry+0xa55/0x10b0 [f2fs] Call Trace: <TASK> f2fs_do_replace_block+0xa98/0x1890 [f2fs] f2fs_replace_block+0xeb/0x180 [f2fs] recover_data+0x1a69/0x6ae0 [f2fs] f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs] f2fs_fill_super+0x4665/0x61e0 [f2fs] mount_bdev+0x2cf/0x3b0 legacy_get_tree+0xed/0x1d0 vfs_get_tree+0x81/0x2b0 path_mount+0x47e/0x19d0 do_mount+0xce/0xf0 __x64_sys_mount+0x12c/0x1a0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd If we enable CONFIG_F2FS_CHECK_FS config, it will trigger a kernel panic instead of warning. The root cause is: in fuzzed image, SIT table is inconsistent with inode mapping table, result in triggering such warning during SIT table update. This patch introduces a new flag DATA_GENERIC_ENHANCE_UPDATE, w/ this flag, data block recovery flow can check destination blkaddr's validation in SIT table, and skip f2fs_replace_block() to avoid inconsistent status. Cc: stable@vger.kernel.org Reported-by: Wenqing Liu <wenqingliu0120@gmail.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-09-13 02:08:41 +00:00
if (f2fs_is_valid_blkaddr(sbi, dest,
DATA_GENERIC_ENHANCE_UPDATE)) {
f2fs_err(sbi, "Inconsistent dest blkaddr:%u, ino:%lu, ofs:%u",
dest, inode->i_ino, dn.ofs_in_node);
err = -EFSCORRUPTED;
f2fs: support recording errors into superblock This patch supports to record detail reason of FSCORRUPTED error into f2fs_super_block.s_errors[]. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-09-28 15:38:54 +00:00
f2fs_handle_error(sbi,
ERROR_INVALID_BLKADDR);
f2fs: fix to do sanity check on destination blkaddr during recovery As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216456 loop5: detected capacity change from 0 to 131072 F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1 F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0 F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1 F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0 F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1 F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0 F2FS-fs (loop5): Bitmap was wrongly set, blk:5634 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1013 at fs/f2fs/segment.c:2198 RIP: 0010:update_sit_entry+0xa55/0x10b0 [f2fs] Call Trace: <TASK> f2fs_do_replace_block+0xa98/0x1890 [f2fs] f2fs_replace_block+0xeb/0x180 [f2fs] recover_data+0x1a69/0x6ae0 [f2fs] f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs] f2fs_fill_super+0x4665/0x61e0 [f2fs] mount_bdev+0x2cf/0x3b0 legacy_get_tree+0xed/0x1d0 vfs_get_tree+0x81/0x2b0 path_mount+0x47e/0x19d0 do_mount+0xce/0xf0 __x64_sys_mount+0x12c/0x1a0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd If we enable CONFIG_F2FS_CHECK_FS config, it will trigger a kernel panic instead of warning. The root cause is: in fuzzed image, SIT table is inconsistent with inode mapping table, result in triggering such warning during SIT table update. This patch introduces a new flag DATA_GENERIC_ENHANCE_UPDATE, w/ this flag, data block recovery flow can check destination blkaddr's validation in SIT table, and skip f2fs_replace_block() to avoid inconsistent status. Cc: stable@vger.kernel.org Reported-by: Wenqing Liu <wenqingliu0120@gmail.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-09-13 02:08:41 +00:00
goto err;
}
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
/* write dummy data page */
f2fs: hide common code in f2fs_replace_block This patch clean up codes through: 1.rename f2fs_replace_block to __f2fs_replace_block(). 2.introduce new f2fs_replace_block() to include __f2fs_replace_block() and some common related codes around __f2fs_replace_block(). Then, newly introduced function f2fs_replace_block can be used by following patch. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-05-28 11:15:35 +00:00
f2fs_replace_block(sbi, &dn, src, dest,
f2fs: support revoking atomic written pages f2fs support atomic write with following semantics: 1. open db file 2. ioctl start atomic write 3. (write db file) * n 4. ioctl commit atomic write 5. close db file With this flow we can avoid file becoming corrupted when abnormal power cut, because we hold data of transaction in referenced pages linked in inmem_pages list of inode, but without setting them dirty, so these data won't be persisted unless we commit them in step 4. But we should still hold journal db file in memory by using volatile write, because our semantics of 'atomic write support' is incomplete, in step 4, we could fail to submit all dirty data of transaction, once partial dirty data was committed in storage, then after a checkpoint & abnormal power-cut, db file will be corrupted forever. So this patch tries to improve atomic write flow by adding a revoking flow, once inner error occurs in committing, this gives another chance to try to revoke these partial submitted data of current transaction, it makes committing operation more like aotmical one. If we're not lucky, once revoking operation was failed, EAGAIN will be reported to user for suggesting doing the recovery with held journal file, or retrying current transaction again. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-06 06:40:34 +00:00
ni.version, false, false);
f2fs: add debug msgs in the recovery routine This patch adds some trivial debugging messages in the recovery process. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-16 06:04:49 +00:00
recovered++;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
}
copy_node_footer(dn.node_page, page);
fill_node_footer(dn.node_page, dn.nid, ni.ino,
ofs_of_node(page), false);
set_page_dirty(dn.node_page);
f2fs: fix to handle do_recover_data errors This patch adds error handling codes of check_index_in_prev_nodes and its caller, do_recover_data. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:20:01 +00:00
err:
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs_put_dnode(&dn);
f2fs: add inline_data recovery routine This patch adds a inline_data recovery routine with the following policy. [prev.] [next] of inline_data flag o o -> recover inline_data o x -> remove inline_data, and then recover data blocks x o -> remove inline_data, and then recover inline_data x x -> recover data blocks Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-26 03:49:48 +00:00
out:
f2fs: introduce f2fs_<level> macros to wrap f2fs_printk() - Add and use f2fs_<level> macros - Convert f2fs_msg to f2fs_printk - Remove level from f2fs_printk and embed the level in the format - Coalesce formats and align multi-line arguments - Remove unnecessary duplicate extern f2fs_msg f2fs.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-18 09:48:42 +00:00
f2fs_notice(sbi, "recover_data: ino = %lx (i_size: %s) recovered = %d, err = %d",
inode->i_ino, file_keep_isize(inode) ? "keep" : "recover",
recovered, err);
f2fs: fix to handle do_recover_data errors This patch adds error handling codes of check_index_in_prev_nodes and its caller, do_recover_data. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-21 23:20:01 +00:00
return err;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
f2fs: fix inode cache leak When testing f2fs with inline_dentry option, generic/342 reports: VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day... After rmmod f2fs module, kenrel shows following dmesg: ============================================================================= BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080 CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276 c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463 616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c11c7276>] slab_err+0x76/0x80 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0 [<c1198a38>] kmem_cache_destroy+0x158/0x1f0 [<c176b43d>] ? mutex_unlock+0xd/0x10 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 INFO: Object 0xd1e6d9e0 @offset=6624 kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7 c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14 f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 The reason is: in recovery flow, we use delayed iput mechanism for directory which has recovered dentry block. It means the reference of inode will be held until last dirty dentry page being writebacked. But when we mount f2fs with inline_dentry option, during recovery, dirent may only be recovered into dir inode page rather than dentry page, so there are no chance for us to release inode reference in ->writepage when writebacking last dentry page. We can call paired iget/iput explicityly for inline_dentry case, but for non-inline_dentry case, iput will call writeback_single_inode to write all data pages synchronously, but during recovery, ->writepages of f2fs skips writing all pages, result in losing dirent. This patch fixes this issue by obsoleting old mechanism, and introduce a new dir_list to hold all directory inodes which has recovered datas until finishing recovery. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-07 08:15:05 +00:00
static int recover_data(struct f2fs_sb_info *sbi, struct list_head *inode_list,
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 10:49:26 +00:00
struct list_head *tmp_inode_list, struct list_head *dir_list)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
{
struct curseg_info *curseg;
f2fs: use meta_inode cache to improve roll-forward speed Previously, all the dnode pages should be read during the roll-forward recovery. Even worsely, whole the chain was traversed twice. This patch removes that redundant and costly read operations by using page cache of meta_inode and readahead function as well. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 20:49:55 +00:00
struct page *page = NULL;
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
int err = 0;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
block_t blkaddr;
f2fs: adjust readahead block number during recovery In a fragmented image, entries in dnode block list may locate in incontiguous physical block address space, however, in recovery flow, we will always readahead BIO_MAX_VECS size blocks, so in such case, current readahead policy is low efficient, let's adjust readahead window size dynamically based on consecutiveness of dnode blocks. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-02-04 00:34:10 +00:00
unsigned int ra_blocks = RECOVERY_MAX_RA_BLOCKS;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
/* get node pages in the current segment */
f2fs: clean up argument of recover_data In recover_data, value of argument 'type' will be CURSEG_WARM_NODE all the time, remove it for cleanup. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-12-01 03:43:59 +00:00
curseg = CURSEG_I(sbi, CURSEG_WARM_NODE);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
blkaddr = NEXT_FREE_BLKADDR(sbi, curseg);
while (1) {
struct fsync_inode_entry *entry;
f2fs: introduce and spread verify_blkaddr This patch introduces verify_blkaddr to check meta/data block address with valid range to detect bug earlier. In addition, once we encounter an invalid blkaddr, notice user to run fsck to fix, and let the kernel panic. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-05 09:44:11 +00:00
if (!f2fs_is_valid_blkaddr(sbi, blkaddr, META_POR))
f2fs: use meta_inode cache to improve roll-forward speed Previously, all the dnode pages should be read during the roll-forward recovery. Even worsely, whole the chain was traversed twice. This patch removes that redundant and costly read operations by using page cache of meta_inode and readahead function as well. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 20:49:55 +00:00
break;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
page = f2fs_get_tmp_page(sbi, blkaddr);
f2fs: fix to propagate error from __get_meta_page() If caller of __get_meta_page() can handle error, let's propagate error from __get_meta_page(). Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-07-16 16:02:17 +00:00
if (IS_ERR(page)) {
err = PTR_ERR(page);
break;
}
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
f2fs: use crc and cp version to determine roll-forward recovery Previously, we used cp_version only to detect recoverable dnodes. In order to avoid same garbage cp_version, we needed to truncate the next dnode during checkpoint, resulting in additional discard or data write. If we can distinguish this by using crc in addition to cp_version, we can remove this overhead. There is backward compatibility concern where it changes node_footer layout. So, this patch introduces a new checkpoint flag, CP_CRC_RECOVERY_FLAG, to detect new layout. New layout will be activated only when this flag is set. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-20 00:55:10 +00:00
if (!is_recoverable_dnode(page)) {
f2fs: use meta_inode cache to improve roll-forward speed Previously, all the dnode pages should be read during the roll-forward recovery. Even worsely, whole the chain was traversed twice. This patch removes that redundant and costly read operations by using page cache of meta_inode and readahead function as well. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 20:49:55 +00:00
f2fs_put_page(page, 1);
f2fs: fix to unlock page before exit If we got an error after lock_page, we should unlock it before exit. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-20 01:26:09 +00:00
break;
f2fs: use meta_inode cache to improve roll-forward speed Previously, all the dnode pages should be read during the roll-forward recovery. Even worsely, whole the chain was traversed twice. This patch removes that redundant and costly read operations by using page cache of meta_inode and readahead function as well. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 20:49:55 +00:00
}
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: fix inode cache leak When testing f2fs with inline_dentry option, generic/342 reports: VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day... After rmmod f2fs module, kenrel shows following dmesg: ============================================================================= BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080 CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276 c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463 616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c11c7276>] slab_err+0x76/0x80 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0 [<c1198a38>] kmem_cache_destroy+0x158/0x1f0 [<c176b43d>] ? mutex_unlock+0xd/0x10 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 INFO: Object 0xd1e6d9e0 @offset=6624 kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7 c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14 f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 The reason is: in recovery flow, we use delayed iput mechanism for directory which has recovered dentry block. It means the reference of inode will be held until last dirty dentry page being writebacked. But when we mount f2fs with inline_dentry option, during recovery, dirent may only be recovered into dir inode page rather than dentry page, so there are no chance for us to release inode reference in ->writepage when writebacking last dentry page. We can call paired iget/iput explicityly for inline_dentry case, but for non-inline_dentry case, iput will call writeback_single_inode to write all data pages synchronously, but during recovery, ->writepages of f2fs skips writing all pages, result in losing dirent. This patch fixes this issue by obsoleting old mechanism, and introduce a new dir_list to hold all directory inodes which has recovered datas until finishing recovery. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-07 08:15:05 +00:00
entry = get_fsync_inode(inode_list, ino_of_node(page));
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
if (!entry)
goto next;
f2fs: fix roll-forward missing scenarios We can summarize the roll forward recovery scenarios as follows. [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) -> Update the latest inode(x). 2. inode(x) | CP | inode(F) | dnode(F) -> No problem. 3. inode(x) | CP | dnode(F) | inode(x) -> Recover to the latest dnode(F), and drop the last inode(x) 4. inode(x) | CP | dnode(F) | inode(F) -> No problem. 5. CP | inode(x) | dnode(F) -> The inode(DF) was missing. Should drop this dnode(F). 6. CP | inode(DF) | dnode(F) -> No problem. 7. CP | dnode(F) | inode(DF) -> If f2fs_iget fails, then goto next to find inode(DF). 8. CP | dnode(F) | inode(x) -> If f2fs_iget fails, then goto next to find inode(DF). But it will fail due to no inode(DF). So, this patch adds some missing points such as #1, #5, #7, and #8. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-15 23:46:08 +00:00
/*
* inode(x) | CP | inode(x) | dnode(F)
* In this case, we can lose the latest inode(x).
f2fs: remove redundant operation during roll-forward recovery If same data is updated multiple times, we don't need to redo whole the operations. Let's just update the lastest one. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 21:29:06 +00:00
* So, call recover_inode for the inode update.
f2fs: fix roll-forward missing scenarios We can summarize the roll forward recovery scenarios as follows. [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) -> Update the latest inode(x). 2. inode(x) | CP | inode(F) | dnode(F) -> No problem. 3. inode(x) | CP | dnode(F) | inode(x) -> Recover to the latest dnode(F), and drop the last inode(x) 4. inode(x) | CP | dnode(F) | inode(F) -> No problem. 5. CP | inode(x) | dnode(F) -> The inode(DF) was missing. Should drop this dnode(F). 6. CP | inode(DF) | dnode(F) -> No problem. 7. CP | dnode(F) | inode(DF) -> If f2fs_iget fails, then goto next to find inode(DF). 8. CP | dnode(F) | inode(x) -> If f2fs_iget fails, then goto next to find inode(DF). But it will fail due to no inode(DF). So, this patch adds some missing points such as #1, #5, #7, and #8. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-15 23:46:08 +00:00
*/
f2fs: guarantee journalled quota data by checkpoint For journalled quota mode, let checkpoint to flush dquot dirty data and quota file data to guarntee persistence of all quota sysfile in last checkpoint, by this way, we can avoid corrupting quota sysfile when encountering SPO. The implementation is as below: 1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is cached dquot metadata changes in quota subsystem, and later checkpoint should: a) flush dquot metadata into quota file. b) flush quota file to storage to keep file usage be consistent. 2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota operation failed due to -EIO or -ENOSPC, so later, a) checkpoint will skip syncing dquot metadata. b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a hint for fsck repairing. 3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota data updating is very heavy, it may cause hungtask in block_operation(). To avoid this, if our retry time exceed threshold, let's just skip flushing and retry in next checkpoint(). Signed-off-by: Weichao Guo <guoweichao@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: avoid warnings and set fsck flag] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 12:05:00 +00:00
if (IS_INODE(page)) {
err = recover_inode(entry->inode, page);
f2fs: fix error path of recovery There are some places in where we missed to unlock page or unlock page incorrectly, fix them. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-10 10:45:26 +00:00
if (err) {
f2fs_put_page(page, 1);
f2fs: guarantee journalled quota data by checkpoint For journalled quota mode, let checkpoint to flush dquot dirty data and quota file data to guarntee persistence of all quota sysfile in last checkpoint, by this way, we can avoid corrupting quota sysfile when encountering SPO. The implementation is as below: 1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is cached dquot metadata changes in quota subsystem, and later checkpoint should: a) flush dquot metadata into quota file. b) flush quota file to storage to keep file usage be consistent. 2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota operation failed due to -EIO or -ENOSPC, so later, a) checkpoint will skip syncing dquot metadata. b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a hint for fsck repairing. 3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota data updating is very heavy, it may cause hungtask in block_operation(). To avoid this, if our retry time exceed threshold, let's just skip flushing and retry in next checkpoint(). Signed-off-by: Weichao Guo <guoweichao@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: avoid warnings and set fsck flag] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 12:05:00 +00:00
break;
f2fs: fix error path of recovery There are some places in where we missed to unlock page or unlock page incorrectly, fix them. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-10 10:45:26 +00:00
}
f2fs: guarantee journalled quota data by checkpoint For journalled quota mode, let checkpoint to flush dquot dirty data and quota file data to guarntee persistence of all quota sysfile in last checkpoint, by this way, we can avoid corrupting quota sysfile when encountering SPO. The implementation is as below: 1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is cached dquot metadata changes in quota subsystem, and later checkpoint should: a) flush dquot metadata into quota file. b) flush quota file to storage to keep file usage be consistent. 2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota operation failed due to -EIO or -ENOSPC, so later, a) checkpoint will skip syncing dquot metadata. b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a hint for fsck repairing. 3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota data updating is very heavy, it may cause hungtask in block_operation(). To avoid this, if our retry time exceed threshold, let's just skip flushing and retry in next checkpoint(). Signed-off-by: Weichao Guo <guoweichao@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: avoid warnings and set fsck flag] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-20 12:05:00 +00:00
}
f2fs: remove redundant operation during roll-forward recovery If same data is updated multiple times, we don't need to redo whole the operations. Let's just update the lastest one. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 21:29:06 +00:00
if (entry->last_dentry == blkaddr) {
f2fs: fix inode cache leak When testing f2fs with inline_dentry option, generic/342 reports: VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day... After rmmod f2fs module, kenrel shows following dmesg: ============================================================================= BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080 CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276 c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463 616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c11c7276>] slab_err+0x76/0x80 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0 [<c1198a38>] kmem_cache_destroy+0x158/0x1f0 [<c176b43d>] ? mutex_unlock+0xd/0x10 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 INFO: Object 0xd1e6d9e0 @offset=6624 kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7 c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14 f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 The reason is: in recovery flow, we use delayed iput mechanism for directory which has recovered dentry block. It means the reference of inode will be held until last dirty dentry page being writebacked. But when we mount f2fs with inline_dentry option, during recovery, dirent may only be recovered into dir inode page rather than dentry page, so there are no chance for us to release inode reference in ->writepage when writebacking last dentry page. We can call paired iget/iput explicityly for inline_dentry case, but for non-inline_dentry case, iput will call writeback_single_inode to write all data pages synchronously, but during recovery, ->writepages of f2fs skips writing all pages, result in losing dirent. This patch fixes this issue by obsoleting old mechanism, and introduce a new dir_list to hold all directory inodes which has recovered datas until finishing recovery. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-07 08:15:05 +00:00
err = recover_dentry(entry->inode, page, dir_list);
f2fs: remove redundant operation during roll-forward recovery If same data is updated multiple times, we don't need to redo whole the operations. Let's just update the lastest one. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 21:29:06 +00:00
if (err) {
f2fs_put_page(page, 1);
break;
}
}
f2fs: remove unused parameter Commit d260081ccf37 ("f2fs: change recovery policy of xattr node block") removes the use of blkaddr, which is no longer used. So remove the parameter. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-22 10:23:40 +00:00
err = do_recover_data(sbi, entry->inode, page);
f2fs: use meta_inode cache to improve roll-forward speed Previously, all the dnode pages should be read during the roll-forward recovery. Even worsely, whole the chain was traversed twice. This patch removes that redundant and costly read operations by using page cache of meta_inode and readahead function as well. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 20:49:55 +00:00
if (err) {
f2fs_put_page(page, 1);
f2fs: fix to unlock page before exit If we got an error after lock_page, we should unlock it before exit. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-20 01:26:09 +00:00
break;
f2fs: use meta_inode cache to improve roll-forward speed Previously, all the dnode pages should be read during the roll-forward recovery. Even worsely, whole the chain was traversed twice. This patch removes that redundant and costly read operations by using page cache of meta_inode and readahead function as well. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 20:49:55 +00:00
}
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: factor out fsync inode entry operations Factor out fsync inode entry operations into {add,del}_fsync_inode. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-04-29 12:13:37 +00:00
if (entry->blkaddr == blkaddr)
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 10:49:26 +00:00
list_move_tail(&entry->list, tmp_inode_list);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
next:
f2fs: adjust readahead block number during recovery In a fragmented image, entries in dnode block list may locate in incontiguous physical block address space, however, in recovery flow, we will always readahead BIO_MAX_VECS size blocks, so in such case, current readahead policy is low efficient, let's adjust readahead window size dynamically based on consecutiveness of dnode blocks. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-02-04 00:34:10 +00:00
ra_blocks = adjust_por_ra_blocks(sbi, ra_blocks, blkaddr,
next_blkaddr_of_node(page));
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
/* check next segment */
blkaddr = next_blkaddr_of_node(page);
f2fs: use meta_inode cache to improve roll-forward speed Previously, all the dnode pages should be read during the roll-forward recovery. Even worsely, whole the chain was traversed twice. This patch removes that redundant and costly read operations by using page cache of meta_inode and readahead function as well. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 20:49:55 +00:00
f2fs_put_page(page, 1);
f2fs: adjust readahead block number during recovery In a fragmented image, entries in dnode block list may locate in incontiguous physical block address space, however, in recovery flow, we will always readahead BIO_MAX_VECS size blocks, so in such case, current readahead policy is low efficient, let's adjust readahead window size dynamically based on consecutiveness of dnode blocks. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-02-04 00:34:10 +00:00
f2fs_ra_meta_pages_cond(sbi, blkaddr, ra_blocks);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
if (!err)
f2fs: split f2fs_allocate_new_segments() to two independent functions: - f2fs_allocate_new_segment() for specified type segment allocation - f2fs_allocate_new_segments() for all data type segments allocation Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-06-22 09:38:48 +00:00
f2fs_allocate_new_segments(sbi);
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
return err;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 16:20:41 +00:00
int f2fs_recover_fsync_data(struct f2fs_sb_info *sbi, bool check_only)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
{
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 10:49:26 +00:00
struct list_head inode_list, tmp_inode_list;
f2fs: fix inode cache leak When testing f2fs with inline_dentry option, generic/342 reports: VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day... After rmmod f2fs module, kenrel shows following dmesg: ============================================================================= BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080 CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276 c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463 616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c11c7276>] slab_err+0x76/0x80 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0 [<c1198a38>] kmem_cache_destroy+0x158/0x1f0 [<c176b43d>] ? mutex_unlock+0xd/0x10 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 INFO: Object 0xd1e6d9e0 @offset=6624 kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7 c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14 f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 The reason is: in recovery flow, we use delayed iput mechanism for directory which has recovered dentry block. It means the reference of inode will be held until last dirty dentry page being writebacked. But when we mount f2fs with inline_dentry option, during recovery, dirent may only be recovered into dir inode page rather than dentry page, so there are no chance for us to release inode reference in ->writepage when writebacking last dentry page. We can call paired iget/iput explicityly for inline_dentry case, but for non-inline_dentry case, iput will call writeback_single_inode to write all data pages synchronously, but during recovery, ->writepages of f2fs skips writing all pages, result in losing dirent. This patch fixes this issue by obsoleting old mechanism, and introduce a new dir_list to hold all directory inodes which has recovered datas until finishing recovery. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-07 08:15:05 +00:00
struct list_head dir_list;
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
int err;
f2fs: give -EINVAL for norecovery and rw mount Once detecting something to recover, f2fs should stop mounting, given norecovery and rw mount options. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-03-23 23:12:58 +00:00
int ret = 0;
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
unsigned long s_flags = sbi->sb->s_flags;
f2fs: use bool for booleans Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-23 04:39:32 +00:00
bool need_writecp = false;
f2fs: Check write pointer consistency of open zones On sudden f2fs shutdown, write pointers of zoned block devices can go further but f2fs meta data keeps current segments at positions before the write operations. After remounting the f2fs, this inconsistency causes write operations not at write pointers and "Unaligned write command" error is reported. To avoid the error, compare current segments with write pointers of open zones the current segments point to, during mount operation. If the write pointer position is not aligned with the current segment position, assign a new zone to the current segment. Also check the newly assigned zone has write pointer at zone start. If not, reset write pointer of the zone. Perform the consistency check during fsync recovery. Not to lose the fsync data, do the check after fsync data gets restored and before checkpoint commit which flushes data at current segment positions. Not to cause conflict with kworker's dirfy data/node flush, do the fix within SBI_POR_DOING protection. Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-12-09 10:44:44 +00:00
bool fix_curseg_write_pointer = false;
f2fs: support quota sys files This patch supports hidden quota files in the system, which will be used for Android. It requires up-to-date f2fs-tools later than v1.9.0. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-10-06 16:14:28 +00:00
#ifdef CONFIG_QUOTA
int quota_enabled;
#endif
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 21:05:09 +00:00
if (s_flags & SB_RDONLY) {
f2fs: introduce f2fs_<level> macros to wrap f2fs_printk() - Add and use f2fs_<level> macros - Convert f2fs_msg to f2fs_printk - Remove level from f2fs_printk and embed the level in the format - Coalesce formats and align multi-line arguments - Remove unnecessary duplicate extern f2fs_msg f2fs.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-18 09:48:42 +00:00
f2fs_info(sbi, "recover fsync data on readonly fs");
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 21:05:09 +00:00
sbi->sb->s_flags &= ~SB_RDONLY;
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
}
#ifdef CONFIG_QUOTA
/* Turn on quotas so that they are updated correctly */
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 21:05:09 +00:00
quota_enabled = f2fs_enable_quota_files(sbi, s_flags & SB_RDONLY);
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
#endif
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
INIT_LIST_HEAD(&inode_list);
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 10:49:26 +00:00
INIT_LIST_HEAD(&tmp_inode_list);
f2fs: fix inode cache leak When testing f2fs with inline_dentry option, generic/342 reports: VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day... After rmmod f2fs module, kenrel shows following dmesg: ============================================================================= BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080 CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276 c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463 616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c11c7276>] slab_err+0x76/0x80 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0 [<c1198a38>] kmem_cache_destroy+0x158/0x1f0 [<c176b43d>] ? mutex_unlock+0xd/0x10 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 INFO: Object 0xd1e6d9e0 @offset=6624 kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7 c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14 f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 The reason is: in recovery flow, we use delayed iput mechanism for directory which has recovered dentry block. It means the reference of inode will be held until last dirty dentry page being writebacked. But when we mount f2fs with inline_dentry option, during recovery, dirent may only be recovered into dir inode page rather than dentry page, so there are no chance for us to release inode reference in ->writepage when writebacking last dentry page. We can call paired iget/iput explicityly for inline_dentry case, but for non-inline_dentry case, iput will call writeback_single_inode to write all data pages synchronously, but during recovery, ->writepages of f2fs skips writing all pages, result in losing dirent. This patch fixes this issue by obsoleting old mechanism, and introduce a new dir_list to hold all directory inodes which has recovered datas until finishing recovery. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-07 08:15:05 +00:00
INIT_LIST_HEAD(&dir_list);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: prevent checkpoint during roll-forward Any checkpoint should not be done during the core roll-forward procedure. Especially, it includes error cases too. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-13 23:30:46 +00:00
/* prevent checkpoint */
f2fs: move f2fs to use reader-unfair rwsems f2fs rw_semaphores work better if writers can starve readers, especially for the checkpoint thread, because writers are strictly more important than reader threads. This prevents significant priority inversion between low-priority readers that blocked while trying to acquire the read lock and a second acquisition of the write lock that might be blocking high priority work. Signed-off-by: Tim Murray <timmurray@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-01-07 20:48:44 +00:00
f2fs_down_write(&sbi->cp_global_sem);
f2fs: prevent checkpoint during roll-forward Any checkpoint should not be done during the core roll-forward procedure. Especially, it includes error cases too. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-13 23:30:46 +00:00
f2fs: do not write any node pages related to orphan inodes We should not write node pages when deleting orphan inodes. In order to do that, we can eaisly set POR_DOING flag earlier before entering orphan inode routine. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-08-11 19:45:39 +00:00
/* step #1: find fsynced inode numbers */
f2fs: avoid dirty node pages in check_only recovery In the check_only mode, we should not make any dirty node pages. Otherwise, we can get this panic: F2FS-fs (nvme0n1p1): Need to recover fsync data ------------[ cut here ]------------ kernel BUG at fs/f2fs/node.c:2204! CPU: 7 PID: 19923 Comm: mount Tainted: G OE 4.9.8 #2 RIP: 0010:[<ffffffffc0979c0b>] [<ffffffffc0979c0b>] flush_nat_entries+0x43b/0x7d0 [f2fs] Call Trace: [<ffffffffc096ddaa>] ? __f2fs_submit_merged_bio+0x5a/0xd0 [f2fs] [<ffffffffc096ddaa>] ? __f2fs_submit_merged_bio+0x5a/0xd0 [f2fs] [<ffffffffc096dddb>] ? __f2fs_submit_merged_bio+0x8b/0xd0 [f2fs] [<ffffffff860e450f>] ? up_write+0x1f/0x40 [<ffffffffc096dddb>] ? __f2fs_submit_merged_bio+0x8b/0xd0 [f2fs] [<ffffffffc0969f04>] write_checkpoint+0x2f4/0xf20 [f2fs] [<ffffffff860e938d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffc0960bc9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc0960bc9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc0960bd5>] f2fs_sync_fs+0x85/0x190 [f2fs] [<ffffffffc097b6de>] f2fs_balance_fs_bg+0x7e/0x1c0 [f2fs] [<ffffffffc0977b64>] f2fs_write_node_pages+0x34/0x350 [f2fs] [<ffffffff860e5f42>] ? __lock_is_held+0x52/0x70 [<ffffffff861d9b31>] do_writepages+0x21/0x30 [<ffffffff86298ce1>] __writeback_single_inode+0x61/0x760 [<ffffffff86909127>] ? _raw_spin_unlock+0x27/0x40 [<ffffffff8629a735>] writeback_single_inode+0xd5/0x190 [<ffffffff8629a889>] write_inode_now+0x99/0xc0 [<ffffffff86283876>] iput+0x1f6/0x2c0 [<ffffffffc0964b52>] f2fs_fill_super+0xc32/0x10c0 [f2fs] [<ffffffff86266462>] mount_bdev+0x182/0x1b0 [<ffffffffc0963f20>] ? f2fs_commit_super+0x100/0x100 [f2fs] [<ffffffffc0960da5>] f2fs_mount+0x15/0x20 [f2fs] [<ffffffff86266e08>] mount_fs+0x38/0x170 [<ffffffff86288bab>] vfs_kern_mount+0x6b/0x160 [<ffffffff8628bcfe>] do_mount+0x1be/0xd60 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-04-14 22:46:23 +00:00
err = find_fsync_dnodes(sbi, &inode_list, check_only);
f2fs: give -EINVAL for norecovery and rw mount Once detecting something to recover, f2fs should stop mounting, given norecovery and rw mount options. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-03-23 23:12:58 +00:00
if (err || list_empty(&inode_list))
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
goto skip;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: give -EINVAL for norecovery and rw mount Once detecting something to recover, f2fs should stop mounting, given norecovery and rw mount options. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-03-23 23:12:58 +00:00
if (check_only) {
ret = 1;
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
goto skip;
f2fs: give -EINVAL for norecovery and rw mount Once detecting something to recover, f2fs should stop mounting, given norecovery and rw mount options. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-03-23 23:12:58 +00:00
}
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: use bool for booleans Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-23 04:39:32 +00:00
need_writecp = true;
f2fs: remove unneeded write checkpoint in recover_fsync_data Previously, recover_fsync_data still to write checkpoint when there is nothing to recover with normal umount image. It may reduce mount performance and flash memory lifetime, so let's remove it. Signed-off-by: Tan Shu <shu.tan@samsung.com> Signed-off-by: Yu Chao <chao2.yu@samsung.com> Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-24 01:26:24 +00:00
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
/* step #2: recover data */
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 10:49:26 +00:00
err = recover_data(sbi, &inode_list, &tmp_inode_list, &dir_list);
f2fs: avoid bug_on when error is occurred During the recovery, if an error like EIO or ENOMEM, f2fs_bug_on should skip. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-08 17:18:43 +00:00
if (!err)
f2fs: need fsck.f2fs when f2fs_bug_on is triggered If any f2fs_bug_on is triggered, fsck.f2fs is needed. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-02 22:52:58 +00:00
f2fs_bug_on(sbi, !list_empty(&inode_list));
f2fs: avoid attaching SB_ACTIVE flag during mount Quoted from [1] "I do remember that I've added this code back then because otherwise orphan cleanup was losing updates to quota files. But you're right that now I don't see how that could be happening and it would be nice if we could get rid of this hack" [1] https://lore.kernel.org/linux-ext4/99cce8ca-e4a0-7301-840f-2ace67c551f3@huawei.com/T/#m04990cfbc4f44592421736b504afcc346b2a7c00 Related fix in ext4 by commit 72ffb49a7b62 ("ext4: do not set SB_ACTIVE in ext4_orphan_cleanup()"). f2fs has the same hack implementation in - f2fs_recover_orphan_inodes() - f2fs_recover_fsync_data() Let's get rid of this hack as well in f2fs. Cc: Zhang Yi <yi.zhang@huawei.com> Cc: Jan Kara <jack@suse.cz> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-09-01 08:06:21 +00:00
else
f2fs_bug_on(sbi, sbi->sb->s_flags & SB_ACTIVE);
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
skip:
f2fs: Check write pointer consistency of open zones On sudden f2fs shutdown, write pointers of zoned block devices can go further but f2fs meta data keeps current segments at positions before the write operations. After remounting the f2fs, this inconsistency causes write operations not at write pointers and "Unaligned write command" error is reported. To avoid the error, compare current segments with write pointers of open zones the current segments point to, during mount operation. If the write pointer position is not aligned with the current segment position, assign a new zone to the current segment. Also check the newly assigned zone has write pointer at zone start. If not, reset write pointer of the zone. Perform the consistency check during fsync recovery. Not to lose the fsync data, do the check after fsync data gets restored and before checkpoint commit which flushes data at current segment positions. Not to cause conflict with kworker's dirfy data/node flush, do the fix within SBI_POR_DOING protection. Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-12-09 10:44:44 +00:00
fix_curseg_write_pointer = !check_only || list_empty(&inode_list);
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 10:49:26 +00:00
destroy_fsync_dnodes(&inode_list, err);
destroy_fsync_dnodes(&tmp_inode_list, err);
f2fs: avoid retrying wrong recovery routine when error was occurred This patch eliminates the propagation of recovery errors to the next mount. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-25 22:47:25 +00:00
f2fs: use meta_inode cache to improve roll-forward speed Previously, all the dnode pages should be read during the roll-forward recovery. Even worsely, whole the chain was traversed twice. This patch removes that redundant and costly read operations by using page cache of meta_inode and readahead function as well. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 20:49:55 +00:00
/* truncate meta pages to be used by the recovery */
truncate_inode_pages_range(META_MAPPING(sbi),
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
(loff_t)MAIN_BLKADDR(sbi) << PAGE_SHIFT, -1);
f2fs: use meta_inode cache to improve roll-forward speed Previously, all the dnode pages should be read during the roll-forward recovery. Even worsely, whole the chain was traversed twice. This patch removes that redundant and costly read operations by using page cache of meta_inode and readahead function as well. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-11 20:49:55 +00:00
f2fs: avoid retrying wrong recovery routine when error was occurred This patch eliminates the propagation of recovery errors to the next mount. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-25 22:47:25 +00:00
if (err) {
truncate_inode_pages_final(NODE_MAPPING(sbi));
truncate_inode_pages_final(META_MAPPING(sbi));
}
f2fs: Check write pointer consistency of open zones On sudden f2fs shutdown, write pointers of zoned block devices can go further but f2fs meta data keeps current segments at positions before the write operations. After remounting the f2fs, this inconsistency causes write operations not at write pointers and "Unaligned write command" error is reported. To avoid the error, compare current segments with write pointers of open zones the current segments point to, during mount operation. If the write pointer position is not aligned with the current segment position, assign a new zone to the current segment. Also check the newly assigned zone has write pointer at zone start. If not, reset write pointer of the zone. Perform the consistency check during fsync recovery. Not to lose the fsync data, do the check after fsync data gets restored and before checkpoint commit which flushes data at current segment positions. Not to cause conflict with kworker's dirfy data/node flush, do the fix within SBI_POR_DOING protection. Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-12-09 10:44:44 +00:00
/*
* If fsync data succeeds or there is no fsync data to recover,
* and the f2fs is not read only, check and fix zoned block devices'
* write pointer consistency.
*/
if (!err && fix_curseg_write_pointer && !f2fs_readonly(sbi->sb) &&
f2fs_sb_has_blkzoned(sbi)) {
err = f2fs_fix_curseg_write_pointer(sbi);
ret = err;
}
if (!err)
clear_sbi_flag(sbi, SBI_POR_DOING);
f2fs: move f2fs to use reader-unfair rwsems f2fs rw_semaphores work better if writers can starve readers, especially for the checkpoint thread, because writers are strictly more important than reader threads. This prevents significant priority inversion between low-priority readers that blocked while trying to acquire the read lock and a second acquisition of the write lock that might be blocking high priority work. Signed-off-by: Tim Murray <timmurray@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-01-07 20:48:44 +00:00
f2fs_up_write(&sbi->cp_global_sem);
f2fs: use crc and cp version to determine roll-forward recovery Previously, we used cp_version only to detect recoverable dnodes. In order to avoid same garbage cp_version, we needed to truncate the next dnode during checkpoint, resulting in additional discard or data write. If we can distinguish this by using crc in addition to cp_version, we can remove this overhead. There is backward compatibility concern where it changes node_footer layout. So, this patch introduces a new checkpoint flag, CP_CRC_RECOVERY_FLAG, to detect new layout. New layout will be activated only when this flag is set. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-20 00:55:10 +00:00
f2fs: put directory inodes before checkpoint in roll-forward recovery Before checkpoint, we'd be better drop any inodes. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-20 01:13:54 +00:00
/* let's drop all the directory inodes for clean checkpoint */
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 10:49:26 +00:00
destroy_fsync_dnodes(&dir_list, err);
f2fs: put directory inodes before checkpoint in roll-forward recovery Before checkpoint, we'd be better drop any inodes. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-20 01:13:54 +00:00
f2fs: fix to flush all dirty inodes recovered in readonly fs generic/417 reported as blow: ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/inode.c:695! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 21697 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: f2fs_evict_inode+0x556/0x580 [f2fs] Call Trace: ? _raw_spin_unlock+0x2c/0x50 evict+0xa8/0x170 dispose_list+0x34/0x40 evict_inodes+0x118/0x120 generic_shutdown_super+0x41/0x100 ? rcu_read_lock_sched_held+0x97/0xa0 kill_block_super+0x22/0x50 kill_f2fs_super+0x6f/0x80 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: f2fs_evict_inode+0x556/0x580 [f2fs] It can simply reproduced with scripts: Enable quota feature during mkfs. Testcase1: 1. mkfs.f2fs /dev/zram0 2. mount -t f2fs /dev/zram0 /mnt/f2fs 3. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4k" -c "fsync" 4. godown /mnt/f2fs 5. umount /mnt/f2fs 6. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs 7. umount /mnt/f2fs Testcase2: 1. mkfs.f2fs /dev/zram0 2. mount -t f2fs /dev/zram0 /mnt/f2fs 3. touch /mnt/f2fs/file 4. create process[pid = x] do: a) open /mnt/f2fs/file; b) unlink /mnt/f2fs/file 5. godown -f /mnt/f2fs 6. kill process[pid = x] 7. umount /mnt/f2fs 8. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs 9. umount /mnt/f2fs The reason is: during recovery, i_{c,m}time of inode will be updated, then the inode can be set dirty w/o being tracked in sbi->inode_list[DIRTY_META] global list, so later write_checkpoint will not flush such dirty inode into node page. Once umount is called, sync_filesystem() in generic_shutdown_super() will skip syncng dirty inodes due to sb_rdonly check, leaving dirty inodes there. To solve this issue, during umount, add remove SB_RDONLY flag in sb->s_flags, to make sure sync_filesystem() will not be skipped. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-22 09:11:05 +00:00
if (need_writecp) {
set_sbi_flag(sbi, SBI_IS_RECOVERED);
if (!err) {
struct cp_control cpc = {
.reason = CP_RECOVERY,
};
err = f2fs_write_checkpoint(sbi, &cpc);
}
f2fs: avoid retrying wrong recovery routine when error was occurred This patch eliminates the propagation of recovery errors to the next mount. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-25 22:47:25 +00:00
}
f2fs: fix inode cache leak When testing f2fs with inline_dentry option, generic/342 reports: VFS: Busy inodes after unmount of dm-0. Self-destruct in 5 seconds. Have a nice day... After rmmod f2fs module, kenrel shows following dmesg: ============================================================================= BUG f2fs_inode_cache (Tainted: G O ): Objects remaining in f2fs_inode_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xf51ca0e0 objects=22 used=1 fp=0xd1e6fc60 flags=0x40004080 CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000086 00000086 d062fe18 c13a83a0 f51ca0e0 d062fe38 d062fea4 c11c7276 c1981040 f51ca0e0 00000016 00000001 d1e6fc60 40004080 656a624f 20737463 616d6572 6e696e69 6e692067 66326620 6e695f73 5f65646f 68636163 6e6f2065 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c11c7276>] slab_err+0x76/0x80 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfc0>] ? __kmem_cache_shutdown+0x100/0x2f0 [<c11cbfe5>] __kmem_cache_shutdown+0x125/0x2f0 [<c1198a38>] kmem_cache_destroy+0x158/0x1f0 [<c176b43d>] ? mutex_unlock+0xd/0x10 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 INFO: Object 0xd1e6d9e0 @offset=6624 kmem_cache_destroy f2fs_inode_cache: Slab cache still has objects CPU: 3 PID: 7455 Comm: rmmod Tainted: G B O 4.6.0-rc4+ #16 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 00000286 00000286 d062fef4 c13a83a0 f174b000 d062ff14 d062ff28 c1198ac7 c197fe18 f3c5b980 d062ff20 000d04f2 d062ff0c d062ff0c d062ff14 d062ff14 f8f20dc0 fffffff5 d062e000 d062ff30 f8f15aa3 d062ff7c c10f596c 73663266 Call Trace: [<c13a83a0>] dump_stack+0x5f/0x8f [<c1198ac7>] kmem_cache_destroy+0x1e7/0x1f0 [<f8f15aa3>] exit_f2fs_fs+0x4b/0x5a8 [f2fs] [<c10f596c>] SyS_delete_module+0x16c/0x1d0 [<c1001b10>] ? do_fast_syscall_32+0x30/0x1c0 [<c13c59bf>] ? __this_cpu_preempt_check+0xf/0x20 [<c10afa7d>] ? trace_hardirqs_on_caller+0xdd/0x210 [<c10ad50b>] ? trace_hardirqs_off+0xb/0x10 [<c1001b81>] do_fast_syscall_32+0xa1/0x1c0 [<c176d888>] sysenter_past_esp+0x45/0x74 The reason is: in recovery flow, we use delayed iput mechanism for directory which has recovered dentry block. It means the reference of inode will be held until last dirty dentry page being writebacked. But when we mount f2fs with inline_dentry option, during recovery, dirent may only be recovered into dir inode page rather than dentry page, so there are no chance for us to release inode reference in ->writepage when writebacking last dentry page. We can call paired iget/iput explicityly for inline_dentry case, but for non-inline_dentry case, iput will call writeback_single_inode to write all data pages synchronously, but during recovery, ->writepages of f2fs skips writing all pages, result in losing dirent. This patch fixes this issue by obsoleting old mechanism, and introduce a new dir_list to hold all directory inodes which has recovered datas until finishing recovery. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-07 08:15:05 +00:00
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
#ifdef CONFIG_QUOTA
/* Turn quotas off */
f2fs: support quota sys files This patch supports hidden quota files in the system, which will be used for Android. It requires up-to-date f2fs-tools later than v1.9.0. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-10-06 16:14:28 +00:00
if (quota_enabled)
f2fs_quota_off_umount(sbi->sb);
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
#endif
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 21:05:09 +00:00
sbi->sb->s_flags = s_flags; /* Restore SB_RDONLY status */
f2fs: support journalled quota This patch supports to enable f2fs to accept quota information through mount option: - {usr,grp,prj}jquota=<quota file path> - jqfmt=<quota type> Then, in ->mount flow, we can recover quota file during log replaying, by this, journelled quota can be supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix wrong return values.] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-08-08 02:54:31 +00:00
f2fs: clean up build warnings This patch combined the below three clean-up patches. - modify open brace '{' following function definitions - ERROR: spaces required around that ':' - ERROR: spaces required before the open parenthesis '(' - ERROR: spaces prohibited before that ',' - Made suggested modifications from checkpatch in reference to WARNING: Missing a blank line after declarations Signed-off-by: Yi Zhuang <zhuangyi1@huawei.com> Signed-off-by: Jia Yang <jiayang5@huawei.com> Signed-off-by: Jack Qiu <jack.qiu@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-04-06 01:47:35 +00:00
return ret ? ret : err;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
f2fs: fix to avoid racing on fsync_entry_slab by multi filesystem instances As syzbot reported, there is an use-after-free issue during f2fs recovery: Use-after-free write at 0xffff88823bc16040 (in kfence-#10): kmem_cache_destroy+0x1f/0x120 mm/slab_common.c:486 f2fs_recover_fsync_data+0x75b0/0x8380 fs/f2fs/recovery.c:869 f2fs_fill_super+0x9393/0xa420 fs/f2fs/super.c:3945 mount_bdev+0x26c/0x3a0 fs/super.c:1367 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2905 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3235 do_mount fs/namespace.c:3248 [inline] __do_sys_mount fs/namespace.c:3456 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is multi f2fs filesystem instances can race on accessing global fsync_entry_slab pointer, result in use-after-free issue of slab cache, fixes to init/destroy this slab cache only once during module init/destroy procedure to avoid this issue. Reported-by: syzbot+9d90dad32dd9727ed084@syzkaller.appspotmail.com Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-05-07 10:10:38 +00:00
int __init f2fs_create_recovery_cache(void)
{
fsync_entry_slab = f2fs_kmem_cache_create("f2fs_fsync_inode_entry",
sizeof(struct fsync_inode_entry));
if (!fsync_entry_slab)
return -ENOMEM;
return 0;
}
void f2fs_destroy_recovery_cache(void)
{
kmem_cache_destroy(fsync_entry_slab);
}
Reference in a new issue Copy permalink