License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
# SPDX-License-Identifier: GPL-2.0
|
2005-09-26 06:04:21 +00:00
|
|
|
#
|
|
|
|
# Makefile for ppc-specific library files..
|
|
|
|
#
|
|
|
|
|
2012-11-26 17:41:08 +00:00
|
|
|
ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC)
|
2006-06-10 10:23:54 +00:00
|
|
|
|
2021-04-29 16:52:09 +00:00
|
|
|
CFLAGS_code-patching.o += -fno-stack-protector
|
|
|
|
CFLAGS_feature-fixups.o += -fno-stack-protector
|
|
|
|
|
2016-03-03 04:26:58 +00:00
|
|
|
CFLAGS_REMOVE_code-patching.o = $(CC_FLAGS_FTRACE)
|
|
|
|
CFLAGS_REMOVE_feature-fixups.o = $(CC_FLAGS_FTRACE)
|
2008-11-26 20:54:46 +00:00
|
|
|
|
2019-04-26 16:23:33 +00:00
|
|
|
KASAN_SANITIZE_code-patching.o := n
|
|
|
|
KASAN_SANITIZE_feature-fixups.o := n
|
powerpc/kasan: Don't instrument non-maskable or raw interrupts
Disable address sanitization for raw and non-maskable interrupt
handlers, because they can run in real mode, where we cannot access
the shadow memory. (Note that kasan_arch_is_ready() doesn't test for
real mode, since it is a static branch for speed, and in any case not
all the entry points to the generic KASAN code are protected by
kasan_arch_is_ready guards.)
The changes to interrupt_nmi_enter/exit_prepare() look larger than
they actually are. The changes are equivalent to adding
!IS_ENABLED(CONFIG_KASAN) to the conditions for calling nmi_enter() or
nmi_exit() in real mode. That is, the code is equivalent to using the
following condition for calling nmi_enter/exit:
if (((!IS_ENABLED(CONFIG_PPC_BOOK3S_64) ||
!firmware_has_feature(FW_FEATURE_LPAR) ||
radix_enabled()) &&
!IS_ENABLED(CONFIG_KASAN) ||
(mfmsr() & MSR_DR))
That unwieldy condition has been split into several statements with
comments, for easier reading.
The nmi_ipi_lock functions that call atomic functions (i.e.,
nmi_ipi_lock_start(), nmi_ipi_lock() and nmi_ipi_unlock()), besides
being marked noinstr, now call arch_atomic_* functions instead of
atomic_* functions because with KASAN enabled, the atomic_* functions
are wrappers which explicitly do address sanitization on their
arguments. Since we are trying to avoid address sanitization, we have
to use the lower-level arch_atomic_* versions.
In hv_nmi_check_nonrecoverable(), the regs_set_unrecoverable() call
has been open-coded so as to avoid having to either trust the inlining
or mark regs_set_unrecoverable() as noinstr.
[paulus@ozlabs.org: combined a few work-in-progress commits of
Daniel's and wrote the commit message.]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YoTFGaKM8Pd46PIK@cleo
2022-05-18 10:06:17 +00:00
|
|
|
# restart_table.o contains functions called in the NMI interrupt path
|
|
|
|
# which can be in real mode. Disable KASAN.
|
|
|
|
KASAN_SANITIZE_restart_table.o := n
|
2023-02-06 02:17:57 +00:00
|
|
|
KCSAN_SANITIZE_code-patching.o := n
|
|
|
|
KCSAN_SANITIZE_feature-fixups.o := n
|
2019-04-26 16:23:33 +00:00
|
|
|
|
|
|
|
ifdef CONFIG_KASAN
|
|
|
|
CFLAGS_code-patching.o += -DDISABLE_BRANCH_PROFILING
|
|
|
|
CFLAGS_feature-fixups.o += -DDISABLE_BRANCH_PROFILING
|
|
|
|
endif
|
|
|
|
|
2021-12-22 13:07:31 +00:00
|
|
|
CFLAGS_code-patching.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
|
|
|
|
CFLAGS_feature-fixups.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
|
|
|
|
|
2023-08-23 05:54:30 +00:00
|
|
|
obj-y += code-patching.o feature-fixups.o pmem.o
|
2017-05-11 15:56:49 +00:00
|
|
|
|
2021-12-02 12:00:26 +00:00
|
|
|
obj-$(CONFIG_CODE_PATCHING_SELFTEST) += test-code-patching.o
|
|
|
|
|
2019-04-26 16:23:26 +00:00
|
|
|
ifndef CONFIG_KASAN
|
|
|
|
obj-y += string.o memcmp_$(BITS).o
|
|
|
|
obj-$(CONFIG_PPC32) += strlen_32.o
|
|
|
|
endif
|
|
|
|
|
|
|
|
obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o
|
2014-12-22 04:14:24 +00:00
|
|
|
|
2018-06-07 09:52:02 +00:00
|
|
|
obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
|
|
|
|
|
2017-05-11 15:56:52 +00:00
|
|
|
# See corresponding test in arch/powerpc/Makefile
|
|
|
|
# 64-bit linker creates .sfpr on demand for final link (vmlinux),
|
|
|
|
# so it is only needed for modules, and only for older linkers which
|
|
|
|
# do not support --save-restore-funcs
|
2023-01-19 08:22:50 +00:00
|
|
|
ifndef CONFIG_LD_IS_BFD
|
2017-05-11 15:56:52 +00:00
|
|
|
extra-$(CONFIG_PPC64) += crtsavres.o
|
|
|
|
endif
|
2005-10-10 12:50:37 +00:00
|
|
|
|
2018-02-20 19:08:26 +00:00
|
|
|
obj-$(CONFIG_PPC_BOOK3S_64) += copyuser_power7.o copypage_power7.o \
|
2021-07-01 11:18:30 +00:00
|
|
|
memcpy_power7.o restart_table.o
|
2018-02-20 19:08:26 +00:00
|
|
|
|
2017-03-21 20:35:08 +00:00
|
|
|
obj64-y += copypage_64.o copyuser_64.o mem_64.o hweight_64.o \
|
2021-07-01 11:18:30 +00:00
|
|
|
memcpy_64.o copy_mc_64.o
|
2014-12-22 04:18:43 +00:00
|
|
|
|
2022-11-28 03:11:13 +00:00
|
|
|
ifdef CONFIG_PPC_QUEUED_SPINLOCKS
|
|
|
|
obj-$(CONFIG_SMP) += qspinlock.o
|
|
|
|
else
|
2014-12-22 04:18:43 +00:00
|
|
|
obj64-$(CONFIG_SMP) += locks.o
|
powerpc/64s: Implement queued spinlocks and rwlocks
These have shown significantly improved performance and fairness when
spinlock contention is moderate to high on very large systems.
With this series including subsequent patches, on a 16 socket 1536
thread POWER9, a stress test such as same-file open/close from all
CPUs gets big speedups, 11620op/s aggregate with simple spinlocks vs
384158op/s (33x faster), where the difference in throughput between
the fastest and slowest thread goes from 7x to 1.4x.
Thanks to the fast path being identical in terms of atomics and
barriers (after a subsequent optimisation patch), single threaded
performance is not changed (no measurable difference).
On smaller systems, performance and fairness seems to be generally
improved. Using dbench on tmpfs as a test (that starts to run into
kernel spinlock contention), a 2-socket OpenPOWER POWER9 system was
tested with bare metal and KVM guest configurations. Results can be
found here:
https://github.com/linuxppc/issues/issues/305#issuecomment-663487453
Observations are:
- Queued spinlocks are equal when contention is insignificant, as
expected and as measured with microbenchmarks.
- When there is contention, on bare metal queued spinlocks have better
throughput and max latency at all points.
- When virtualised, queued spinlocks are slightly worse approaching
peak throughput, but significantly better throughput and max latency
at all points beyond peak, until queued spinlock maximum latency
rises when clients are 2x vCPUs.
The regressions haven't been analysed very well yet, there are a lot
of things that can be tuned, particularly the paravirtualised locking,
but the numbers already look like a good net win even on relatively
small systems.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-4-npiggin@gmail.com
2020-07-24 13:14:20 +00:00
|
|
|
endif
|
|
|
|
|
2014-12-22 04:18:43 +00:00
|
|
|
obj64-$(CONFIG_ALTIVEC) += vmx-helper.o
|
2019-02-20 06:56:58 +00:00
|
|
|
obj64-$(CONFIG_KPROBES_SANITY_TEST) += test_emulate_step.o \
|
|
|
|
test_emulate_step_exec_instr.o
|
2014-12-22 04:18:43 +00:00
|
|
|
|
powerpc/lib: optimise 32 bits __clear_user()
Rewrite clear_user() on the same principle as memset(0), making use
of dcbz to clear complete cache lines.
This code is a copy/paste of memset(), with some modifications
in order to retrieve remaining number of bytes to be cleared,
as it needs to be returned in case of error.
On the same way as done on PPC64 in commit 17968fbbd19f1
("powerpc: 64bit optimised __clear_user"), the patch moves
__clear_user() into a dedicated file string_32.S
On a MPC885, throughput is almost doubled:
Before:
~# dd if=/dev/zero of=/dev/null bs=1M count=1000
1048576000 bytes (1000.0MB) copied, 18.990779 seconds, 52.7MB/s
After:
~# dd if=/dev/zero of=/dev/null bs=1M count=1000
1048576000 bytes (1000.0MB) copied, 9.611468 seconds, 104.0MB/s
On a MPC8321, throughput is multiplied by 2.12:
Before:
root@vgoippro:~# dd if=/dev/zero of=/dev/null bs=1M count=1000
1048576000 bytes (1000.0MB) copied, 6.844352 seconds, 146.1MB/s
After:
root@vgoippro:~# dd if=/dev/zero of=/dev/null bs=1M count=1000
1048576000 bytes (1000.0MB) copied, 3.218854 seconds, 310.7MB/s
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-30 07:06:13 +00:00
|
|
|
obj-y += checksum_$(BITS).o checksum_wrappers.o \
|
2019-04-26 16:23:26 +00:00
|
|
|
string_$(BITS).o
|
2013-09-23 02:04:51 +00:00
|
|
|
|
2019-05-13 10:00:15 +00:00
|
|
|
obj-y += sstep.o
|
|
|
|
obj-$(CONFIG_PPC_FPU) += ldstfp.o
|
2017-08-30 04:12:40 +00:00
|
|
|
obj64-y += quad.o
|
2005-10-28 12:53:37 +00:00
|
|
|
|
2007-09-16 10:53:25 +00:00
|
|
|
obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
|
2008-06-24 01:32:21 +00:00
|
|
|
|
2008-06-24 01:33:03 +00:00
|
|
|
obj-$(CONFIG_FTR_FIXUP_SELFTEST) += feature-fixups-test.o
|
2013-10-14 10:03:58 +00:00
|
|
|
|
powerpc/lib/xor_vmx: Ensure no altivec code executes before enable_kernel_altivec()
The xor_vmx.c file is used for the RAID5 xor operations. In these functions
altivec is enabled to run the operation and then disabled.
The code uses enable_kernel_altivec() around the core of the algorithm, however
the whole file is built with -maltivec, so the compiler is within its rights to
generate altivec code anywhere. This has been seen at least once in the wild:
0:mon> di $xor_altivec_2
c0000000000b97d0 3c4c01d9 addis r2,r12,473
c0000000000b97d4 3842db30 addi r2,r2,-9424
c0000000000b97d8 7c0802a6 mflr r0
c0000000000b97dc f8010010 std r0,16(r1)
c0000000000b97e0 60000000 nop
c0000000000b97e4 7c0802a6 mflr r0
c0000000000b97e8 faa1ffa8 std r21,-88(r1)
...
c0000000000b981c f821ff41 stdu r1,-192(r1)
c0000000000b9820 7f8101ce stvx v28,r1,r0 <-- POP
c0000000000b9824 38000030 li r0,48
c0000000000b9828 7fa101ce stvx v29,r1,r0
...
c0000000000b984c 4bf6a06d bl c0000000000238b8 # enable_kernel_altivec
This patch splits the non-altivec code into xor_vmx_glue.c which calls the
altivec functions in xor_vmx.c. By compiling xor_vmx_glue.c without
-maltivec we can guarantee that altivec instruction will not be executed
outside of the enable/disable block.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
[mpe: Rework change log and include disassembly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-23 23:45:59 +00:00
|
|
|
obj-$(CONFIG_ALTIVEC) += xor_vmx.o xor_vmx_glue.o
|
2015-05-25 22:53:26 +00:00
|
|
|
CFLAGS_xor_vmx.o += -maltivec $(call cc-option,-mabi=altivec)
|
2021-08-02 20:43:15 +00:00
|
|
|
# Enable <altivec.h>
|
|
|
|
CFLAGS_xor_vmx.o += -isystem $(shell $(CC) -print-file-name=include)
|
2014-12-22 04:18:43 +00:00
|
|
|
|
|
|
|
obj-$(CONFIG_PPC64) += $(obj64-y)
|