linux-stable/drivers/counter/104-quad-8.c

1044 lines
28 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Counter driver for the ACCES 104-QUAD-8
* Copyright (C) 2016 William Breathitt Gray
*
* This driver supports the ACCES 104-QUAD-8 and ACCES 104-QUAD-4.
*/
#include <linux/bitops.h>
#include <linux/counter.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/isa.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#define QUAD8_EXTENT 32
static unsigned int base[max_num_isa_dev(QUAD8_EXTENT)];
static unsigned int num_quad8;
module_param_hw_array(base, uint, ioport, &num_quad8, 0);
MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
#define QUAD8_NUM_COUNTERS 8
/**
* struct quad8 - device private data structure
* @lock: lock to prevent clobbering device states during R/W ops
* @counter: instance of the counter_device
* @fck_prescaler: array of filter clock prescaler configurations
* @preset: array of preset values
* @count_mode: array of count mode configurations
* @quadrature_mode: array of quadrature mode configurations
* @quadrature_scale: array of quadrature mode scale configurations
* @ab_enable: array of A and B inputs enable configurations
* @preset_enable: array of set_to_preset_on_index attribute configurations
* @synchronous_mode: array of index function synchronous mode configurations
* @index_polarity: array of index function polarity configurations
* @cable_fault_enable: differential encoder cable status enable configurations
* @base: base port address of the device
*/
struct quad8 {
struct mutex lock;
struct counter_device counter;
unsigned int fck_prescaler[QUAD8_NUM_COUNTERS];
unsigned int preset[QUAD8_NUM_COUNTERS];
unsigned int count_mode[QUAD8_NUM_COUNTERS];
unsigned int quadrature_mode[QUAD8_NUM_COUNTERS];
unsigned int quadrature_scale[QUAD8_NUM_COUNTERS];
unsigned int ab_enable[QUAD8_NUM_COUNTERS];
unsigned int preset_enable[QUAD8_NUM_COUNTERS];
unsigned int synchronous_mode[QUAD8_NUM_COUNTERS];
unsigned int index_polarity[QUAD8_NUM_COUNTERS];
unsigned int cable_fault_enable;
unsigned int base;
};
#define QUAD8_REG_CHAN_OP 0x11
#define QUAD8_REG_INDEX_INPUT_LEVELS 0x16
#define QUAD8_DIFF_ENCODER_CABLE_STATUS 0x17
/* Borrow Toggle flip-flop */
#define QUAD8_FLAG_BT BIT(0)
/* Carry Toggle flip-flop */
#define QUAD8_FLAG_CT BIT(1)
/* Error flag */
#define QUAD8_FLAG_E BIT(4)
/* Up/Down flag */
#define QUAD8_FLAG_UD BIT(5)
/* Reset and Load Signal Decoders */
#define QUAD8_CTR_RLD 0x00
/* Counter Mode Register */
#define QUAD8_CTR_CMR 0x20
/* Input / Output Control Register */
#define QUAD8_CTR_IOR 0x40
/* Index Control Register */
#define QUAD8_CTR_IDR 0x60
/* Reset Byte Pointer (three byte data pointer) */
#define QUAD8_RLD_RESET_BP 0x01
/* Reset Counter */
#define QUAD8_RLD_RESET_CNTR 0x02
/* Reset Borrow Toggle, Carry Toggle, Compare Toggle, and Sign flags */
#define QUAD8_RLD_RESET_FLAGS 0x04
/* Reset Error flag */
#define QUAD8_RLD_RESET_E 0x06
/* Preset Register to Counter */
#define QUAD8_RLD_PRESET_CNTR 0x08
/* Transfer Counter to Output Latch */
#define QUAD8_RLD_CNTR_OUT 0x10
/* Transfer Preset Register LSB to FCK Prescaler */
#define QUAD8_RLD_PRESET_PSC 0x18
#define QUAD8_CHAN_OP_ENABLE_COUNTERS 0x00
#define QUAD8_CHAN_OP_RESET_COUNTERS 0x01
#define QUAD8_CMR_QUADRATURE_X1 0x08
#define QUAD8_CMR_QUADRATURE_X2 0x10
#define QUAD8_CMR_QUADRATURE_X4 0x18
static int quad8_signal_read(struct counter_device *counter,
struct counter_signal *signal,
enum counter_signal_level *level)
{
const struct quad8 *const priv = counter->priv;
unsigned int state;
/* Only Index signal levels can be read */
if (signal->id < 16)
return -EINVAL;
state = inb(priv->base + QUAD8_REG_INDEX_INPUT_LEVELS)
& BIT(signal->id - 16);
*level = (state) ? COUNTER_SIGNAL_LEVEL_HIGH : COUNTER_SIGNAL_LEVEL_LOW;
return 0;
}
static int quad8_count_read(struct counter_device *counter,
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
struct counter_count *count, u64 *val)
{
struct quad8 *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
unsigned int flags;
unsigned int borrow;
unsigned int carry;
int i;
flags = inb(base_offset + 1);
borrow = flags & QUAD8_FLAG_BT;
carry = !!(flags & QUAD8_FLAG_CT);
/* Borrow XOR Carry effectively doubles count range */
*val = (unsigned long)(borrow ^ carry) << 24;
mutex_lock(&priv->lock);
/* Reset Byte Pointer; transfer Counter to Output Latch */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
base_offset + 1);
for (i = 0; i < 3; i++)
*val |= (unsigned long)inb(base_offset) << (8 * i);
mutex_unlock(&priv->lock);
return 0;
}
static int quad8_count_write(struct counter_device *counter,
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
struct counter_count *count, u64 val)
{
struct quad8 *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
int i;
/* Only 24-bit values are supported */
if (val > 0xFFFFFF)
return -ERANGE;
mutex_lock(&priv->lock);
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
/* Counter can only be set via Preset Register */
for (i = 0; i < 3; i++)
outb(val >> (8 * i), base_offset);
/* Transfer Preset Register to Counter */
outb(QUAD8_CTR_RLD | QUAD8_RLD_PRESET_CNTR, base_offset + 1);
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
/* Set Preset Register back to original value */
val = priv->preset[count->id];
for (i = 0; i < 3; i++)
outb(val >> (8 * i), base_offset);
/* Reset Borrow, Carry, Compare, and Sign flags */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_FLAGS, base_offset + 1);
/* Reset Error flag */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
mutex_unlock(&priv->lock);
return 0;
}
static const enum counter_function quad8_count_functions_list[] = {
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
COUNTER_FUNCTION_PULSE_DIRECTION,
COUNTER_FUNCTION_QUADRATURE_X1_A,
COUNTER_FUNCTION_QUADRATURE_X2_A,
COUNTER_FUNCTION_QUADRATURE_X4,
};
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_function_read(struct counter_device *counter,
struct counter_count *count,
enum counter_function *function)
{
struct quad8 *const priv = counter->priv;
const int id = count->id;
mutex_lock(&priv->lock);
if (priv->quadrature_mode[id])
switch (priv->quadrature_scale[id]) {
case 0:
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*function = COUNTER_FUNCTION_QUADRATURE_X1_A;
break;
case 1:
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*function = COUNTER_FUNCTION_QUADRATURE_X2_A;
break;
case 2:
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*function = COUNTER_FUNCTION_QUADRATURE_X4;
break;
}
else
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*function = COUNTER_FUNCTION_PULSE_DIRECTION;
mutex_unlock(&priv->lock);
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_function_write(struct counter_device *counter,
struct counter_count *count,
enum counter_function function)
{
struct quad8 *const priv = counter->priv;
const int id = count->id;
unsigned int *const quadrature_mode = priv->quadrature_mode + id;
unsigned int *const scale = priv->quadrature_scale + id;
unsigned int *const synchronous_mode = priv->synchronous_mode + id;
const int base_offset = priv->base + 2 * id + 1;
unsigned int mode_cfg;
unsigned int idr_cfg;
mutex_lock(&priv->lock);
mode_cfg = priv->count_mode[id] << 1;
idr_cfg = priv->index_polarity[id] << 1;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
if (function == COUNTER_FUNCTION_PULSE_DIRECTION) {
*quadrature_mode = 0;
/* Quadrature scaling only available in quadrature mode */
*scale = 0;
/* Synchronous function not supported in non-quadrature mode */
if (*synchronous_mode) {
*synchronous_mode = 0;
/* Disable synchronous function mode */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
}
} else {
*quadrature_mode = 1;
switch (function) {
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
case COUNTER_FUNCTION_QUADRATURE_X1_A:
*scale = 0;
mode_cfg |= QUAD8_CMR_QUADRATURE_X1;
break;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
case COUNTER_FUNCTION_QUADRATURE_X2_A:
*scale = 1;
mode_cfg |= QUAD8_CMR_QUADRATURE_X2;
break;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
case COUNTER_FUNCTION_QUADRATURE_X4:
*scale = 2;
mode_cfg |= QUAD8_CMR_QUADRATURE_X4;
break;
default:
/* should never reach this path */
mutex_unlock(&priv->lock);
return -EINVAL;
}
}
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
mutex_unlock(&priv->lock);
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_direction_read(struct counter_device *counter,
struct counter_count *count,
enum counter_count_direction *direction)
{
const struct quad8 *const priv = counter->priv;
unsigned int ud_flag;
const unsigned int flag_addr = priv->base + 2 * count->id + 1;
/* U/D flag: nonzero = up, zero = down */
ud_flag = inb(flag_addr) & QUAD8_FLAG_UD;
*direction = (ud_flag) ? COUNTER_COUNT_DIRECTION_FORWARD :
COUNTER_COUNT_DIRECTION_BACKWARD;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
return 0;
}
static const enum counter_synapse_action quad8_index_actions_list[] = {
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
COUNTER_SYNAPSE_ACTION_NONE,
COUNTER_SYNAPSE_ACTION_RISING_EDGE,
};
static const enum counter_synapse_action quad8_synapse_actions_list[] = {
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
COUNTER_SYNAPSE_ACTION_NONE,
COUNTER_SYNAPSE_ACTION_RISING_EDGE,
COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
};
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_action_read(struct counter_device *counter,
struct counter_count *count,
struct counter_synapse *synapse,
enum counter_synapse_action *action)
{
struct quad8 *const priv = counter->priv;
int err;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
enum counter_function function;
const size_t signal_a_id = count->synapses[0].signal->id;
enum counter_count_direction direction;
/* Handle Index signals */
if (synapse->signal->id >= 16) {
if (priv->preset_enable[count->id])
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*action = COUNTER_SYNAPSE_ACTION_RISING_EDGE;
else
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*action = COUNTER_SYNAPSE_ACTION_NONE;
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
err = quad8_function_read(counter, count, &function);
if (err)
return err;
/* Default action mode */
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*action = COUNTER_SYNAPSE_ACTION_NONE;
/* Determine action mode based on current count function mode */
switch (function) {
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
case COUNTER_FUNCTION_PULSE_DIRECTION:
if (synapse->signal->id == signal_a_id)
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*action = COUNTER_SYNAPSE_ACTION_RISING_EDGE;
return 0;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
case COUNTER_FUNCTION_QUADRATURE_X1_A:
if (synapse->signal->id == signal_a_id) {
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
err = quad8_direction_read(counter, count, &direction);
if (err)
return err;
if (direction == COUNTER_COUNT_DIRECTION_FORWARD)
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*action = COUNTER_SYNAPSE_ACTION_RISING_EDGE;
else
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*action = COUNTER_SYNAPSE_ACTION_FALLING_EDGE;
}
return 0;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
case COUNTER_FUNCTION_QUADRATURE_X2_A:
if (synapse->signal->id == signal_a_id)
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
return 0;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
case COUNTER_FUNCTION_QUADRATURE_X4:
*action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
return 0;
default:
/* should never reach this path */
return -EINVAL;
}
}
static const struct counter_ops quad8_ops = {
.signal_read = quad8_signal_read,
.count_read = quad8_count_read,
.count_write = quad8_count_write,
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
.function_read = quad8_function_read,
.function_write = quad8_function_write,
.action_read = quad8_action_read
};
static const char *const quad8_index_polarity_modes[] = {
"negative",
"positive"
};
static int quad8_index_polarity_get(struct counter_device *counter,
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
struct counter_signal *signal,
u32 *index_polarity)
{
const struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
*index_polarity = priv->index_polarity[channel_id];
return 0;
}
static int quad8_index_polarity_set(struct counter_device *counter,
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
struct counter_signal *signal,
u32 index_polarity)
{
struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
const int base_offset = priv->base + 2 * channel_id + 1;
unsigned int idr_cfg = index_polarity << 1;
mutex_lock(&priv->lock);
idr_cfg |= priv->synchronous_mode[channel_id];
priv->index_polarity[channel_id] = index_polarity;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
mutex_unlock(&priv->lock);
return 0;
}
static const char *const quad8_synchronous_modes[] = {
"non-synchronous",
"synchronous"
};
static int quad8_synchronous_mode_get(struct counter_device *counter,
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
struct counter_signal *signal,
u32 *synchronous_mode)
{
const struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
*synchronous_mode = priv->synchronous_mode[channel_id];
return 0;
}
static int quad8_synchronous_mode_set(struct counter_device *counter,
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
struct counter_signal *signal,
u32 synchronous_mode)
{
struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
const int base_offset = priv->base + 2 * channel_id + 1;
unsigned int idr_cfg = synchronous_mode;
mutex_lock(&priv->lock);
idr_cfg |= priv->index_polarity[channel_id] << 1;
/* Index function must be non-synchronous in non-quadrature mode */
if (synchronous_mode && !priv->quadrature_mode[channel_id]) {
mutex_unlock(&priv->lock);
return -EINVAL;
}
priv->synchronous_mode[channel_id] = synchronous_mode;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
mutex_unlock(&priv->lock);
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_count_floor_read(struct counter_device *counter,
struct counter_count *count, u64 *floor)
{
/* Only a floor of 0 is supported */
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*floor = 0;
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_count_mode_read(struct counter_device *counter,
struct counter_count *count,
enum counter_count_mode *cnt_mode)
{
const struct quad8 *const priv = counter->priv;
/* Map 104-QUAD-8 count mode to Generic Counter count mode */
switch (priv->count_mode[count->id]) {
case 0:
*cnt_mode = COUNTER_COUNT_MODE_NORMAL;
break;
case 1:
*cnt_mode = COUNTER_COUNT_MODE_RANGE_LIMIT;
break;
case 2:
*cnt_mode = COUNTER_COUNT_MODE_NON_RECYCLE;
break;
case 3:
*cnt_mode = COUNTER_COUNT_MODE_MODULO_N;
break;
}
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_count_mode_write(struct counter_device *counter,
struct counter_count *count,
enum counter_count_mode cnt_mode)
{
struct quad8 *const priv = counter->priv;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
unsigned int count_mode;
unsigned int mode_cfg;
const int base_offset = priv->base + 2 * count->id + 1;
/* Map Generic Counter count mode to 104-QUAD-8 count mode */
switch (cnt_mode) {
case COUNTER_COUNT_MODE_NORMAL:
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
count_mode = 0;
break;
case COUNTER_COUNT_MODE_RANGE_LIMIT:
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
count_mode = 1;
break;
case COUNTER_COUNT_MODE_NON_RECYCLE:
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
count_mode = 2;
break;
case COUNTER_COUNT_MODE_MODULO_N:
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
count_mode = 3;
break;
default:
/* should never reach this path */
return -EINVAL;
}
mutex_lock(&priv->lock);
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
priv->count_mode[count->id] = count_mode;
/* Set count mode configuration value */
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
mode_cfg = count_mode << 1;
/* Add quadrature mode configuration */
if (priv->quadrature_mode[count->id])
mode_cfg |= (priv->quadrature_scale[count->id] + 1) << 3;
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
mutex_unlock(&priv->lock);
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_count_enable_read(struct counter_device *counter,
struct counter_count *count, u8 *enable)
{
const struct quad8 *const priv = counter->priv;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*enable = priv->ab_enable[count->id];
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_count_enable_write(struct counter_device *counter,
struct counter_count *count, u8 enable)
{
struct quad8 *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
unsigned int ior_cfg;
mutex_lock(&priv->lock);
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
priv->ab_enable[count->id] = enable;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
ior_cfg = enable | priv->preset_enable[count->id] << 1;
/* Load I/O control configuration */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
mutex_unlock(&priv->lock);
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
return 0;
}
static const char *const quad8_noise_error_states[] = {
"No excessive noise is present at the count inputs",
"Excessive noise is present at the count inputs"
};
static int quad8_error_noise_get(struct counter_device *counter,
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
struct counter_count *count, u32 *noise_error)
{
const struct quad8 *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id + 1;
*noise_error = !!(inb(base_offset) & QUAD8_FLAG_E);
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_count_preset_read(struct counter_device *counter,
struct counter_count *count, u64 *preset)
{
const struct quad8 *const priv = counter->priv;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*preset = priv->preset[count->id];
return 0;
}
static void quad8_preset_register_set(struct quad8 *const priv, const int id,
const unsigned int preset)
{
const unsigned int base_offset = priv->base + 2 * id;
int i;
priv->preset[id] = preset;
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
/* Set Preset Register */
for (i = 0; i < 3; i++)
outb(preset >> (8 * i), base_offset);
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_count_preset_write(struct counter_device *counter,
struct counter_count *count, u64 preset)
{
struct quad8 *const priv = counter->priv;
/* Only 24-bit values are supported */
if (preset > 0xFFFFFF)
return -ERANGE;
mutex_lock(&priv->lock);
quad8_preset_register_set(priv, count->id, preset);
mutex_unlock(&priv->lock);
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_count_ceiling_read(struct counter_device *counter,
struct counter_count *count, u64 *ceiling)
{
struct quad8 *const priv = counter->priv;
mutex_lock(&priv->lock);
/* Range Limit and Modulo-N count modes use preset value as ceiling */
switch (priv->count_mode[count->id]) {
case 1:
case 3:
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*ceiling = priv->preset[count->id];
break;
default:
/* By default 0x1FFFFFF (25 bits unsigned) is maximum count */
*ceiling = 0x1FFFFFF;
break;
}
mutex_unlock(&priv->lock);
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_count_ceiling_write(struct counter_device *counter,
struct counter_count *count, u64 ceiling)
{
struct quad8 *const priv = counter->priv;
/* Only 24-bit values are supported */
if (ceiling > 0xFFFFFF)
return -ERANGE;
mutex_lock(&priv->lock);
/* Range Limit and Modulo-N count modes use preset value as ceiling */
switch (priv->count_mode[count->id]) {
case 1:
case 3:
quad8_preset_register_set(priv, count->id, ceiling);
mutex_unlock(&priv->lock);
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
return 0;
}
mutex_unlock(&priv->lock);
return -EINVAL;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_count_preset_enable_read(struct counter_device *counter,
struct counter_count *count,
u8 *preset_enable)
{
const struct quad8 *const priv = counter->priv;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*preset_enable = !priv->preset_enable[count->id];
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_count_preset_enable_write(struct counter_device *counter,
struct counter_count *count,
u8 preset_enable)
{
struct quad8 *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id + 1;
unsigned int ior_cfg;
/* Preset enable is active low in Input/Output Control register */
preset_enable = !preset_enable;
mutex_lock(&priv->lock);
priv->preset_enable[count->id] = preset_enable;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
ior_cfg = priv->ab_enable[count->id] | preset_enable << 1;
/* Load I/O control configuration to Input / Output Control Register */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
mutex_unlock(&priv->lock);
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_signal_cable_fault_read(struct counter_device *counter,
struct counter_signal *signal,
u8 *cable_fault)
{
struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id / 2;
bool disabled;
unsigned int status;
mutex_lock(&priv->lock);
disabled = !(priv->cable_fault_enable & BIT(channel_id));
if (disabled) {
mutex_unlock(&priv->lock);
return -EINVAL;
}
/* Logic 0 = cable fault */
status = inb(priv->base + QUAD8_DIFF_ENCODER_CABLE_STATUS);
mutex_unlock(&priv->lock);
/* Mask respective channel and invert logic */
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*cable_fault = !(status & BIT(channel_id));
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_signal_cable_fault_enable_read(struct counter_device *counter,
struct counter_signal *signal,
u8 *enable)
{
const struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id / 2;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*enable = !!(priv->cable_fault_enable & BIT(channel_id));
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_signal_cable_fault_enable_write(struct counter_device *counter,
struct counter_signal *signal,
u8 enable)
{
struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id / 2;
unsigned int cable_fault_enable;
mutex_lock(&priv->lock);
if (enable)
priv->cable_fault_enable |= BIT(channel_id);
else
priv->cable_fault_enable &= ~BIT(channel_id);
/* Enable is active low in Differential Encoder Cable Status register */
cable_fault_enable = ~priv->cable_fault_enable;
outb(cable_fault_enable, priv->base + QUAD8_DIFF_ENCODER_CABLE_STATUS);
mutex_unlock(&priv->lock);
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_signal_fck_prescaler_read(struct counter_device *counter,
struct counter_signal *signal,
u8 *prescaler)
{
const struct quad8 *const priv = counter->priv;
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
*prescaler = priv->fck_prescaler[signal->id / 2];
return 0;
}
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static int quad8_signal_fck_prescaler_write(struct counter_device *counter,
struct counter_signal *signal,
u8 prescaler)
{
struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id / 2;
const int base_offset = priv->base + 2 * channel_id;
mutex_lock(&priv->lock);
priv->fck_prescaler[channel_id] = prescaler;
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
/* Set filter clock factor */
outb(prescaler, base_offset);
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_PRESET_PSC,
base_offset + 1);
mutex_unlock(&priv->lock);
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
return 0;
}
static struct counter_comp quad8_signal_ext[] = {
COUNTER_COMP_SIGNAL_BOOL("cable_fault", quad8_signal_cable_fault_read,
NULL),
COUNTER_COMP_SIGNAL_BOOL("cable_fault_enable",
quad8_signal_cable_fault_enable_read,
quad8_signal_cable_fault_enable_write),
COUNTER_COMP_SIGNAL_U8("filter_clock_prescaler",
quad8_signal_fck_prescaler_read,
quad8_signal_fck_prescaler_write)
};
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static DEFINE_COUNTER_ENUM(quad8_index_pol_enum, quad8_index_polarity_modes);
static DEFINE_COUNTER_ENUM(quad8_synch_mode_enum, quad8_synchronous_modes);
static struct counter_comp quad8_index_ext[] = {
COUNTER_COMP_SIGNAL_ENUM("index_polarity", quad8_index_polarity_get,
quad8_index_polarity_set,
quad8_index_pol_enum),
COUNTER_COMP_SIGNAL_ENUM("synchronous_mode", quad8_synchronous_mode_get,
quad8_synchronous_mode_set,
quad8_synch_mode_enum),
};
#define QUAD8_QUAD_SIGNAL(_id, _name) { \
.id = (_id), \
.name = (_name), \
.ext = quad8_signal_ext, \
.num_ext = ARRAY_SIZE(quad8_signal_ext) \
}
#define QUAD8_INDEX_SIGNAL(_id, _name) { \
.id = (_id), \
.name = (_name), \
.ext = quad8_index_ext, \
.num_ext = ARRAY_SIZE(quad8_index_ext) \
}
static struct counter_signal quad8_signals[] = {
QUAD8_QUAD_SIGNAL(0, "Channel 1 Quadrature A"),
QUAD8_QUAD_SIGNAL(1, "Channel 1 Quadrature B"),
QUAD8_QUAD_SIGNAL(2, "Channel 2 Quadrature A"),
QUAD8_QUAD_SIGNAL(3, "Channel 2 Quadrature B"),
QUAD8_QUAD_SIGNAL(4, "Channel 3 Quadrature A"),
QUAD8_QUAD_SIGNAL(5, "Channel 3 Quadrature B"),
QUAD8_QUAD_SIGNAL(6, "Channel 4 Quadrature A"),
QUAD8_QUAD_SIGNAL(7, "Channel 4 Quadrature B"),
QUAD8_QUAD_SIGNAL(8, "Channel 5 Quadrature A"),
QUAD8_QUAD_SIGNAL(9, "Channel 5 Quadrature B"),
QUAD8_QUAD_SIGNAL(10, "Channel 6 Quadrature A"),
QUAD8_QUAD_SIGNAL(11, "Channel 6 Quadrature B"),
QUAD8_QUAD_SIGNAL(12, "Channel 7 Quadrature A"),
QUAD8_QUAD_SIGNAL(13, "Channel 7 Quadrature B"),
QUAD8_QUAD_SIGNAL(14, "Channel 8 Quadrature A"),
QUAD8_QUAD_SIGNAL(15, "Channel 8 Quadrature B"),
QUAD8_INDEX_SIGNAL(16, "Channel 1 Index"),
QUAD8_INDEX_SIGNAL(17, "Channel 2 Index"),
QUAD8_INDEX_SIGNAL(18, "Channel 3 Index"),
QUAD8_INDEX_SIGNAL(19, "Channel 4 Index"),
QUAD8_INDEX_SIGNAL(20, "Channel 5 Index"),
QUAD8_INDEX_SIGNAL(21, "Channel 6 Index"),
QUAD8_INDEX_SIGNAL(22, "Channel 7 Index"),
QUAD8_INDEX_SIGNAL(23, "Channel 8 Index")
};
#define QUAD8_COUNT_SYNAPSES(_id) { \
{ \
.actions_list = quad8_synapse_actions_list, \
.num_actions = ARRAY_SIZE(quad8_synapse_actions_list), \
.signal = quad8_signals + 2 * (_id) \
}, \
{ \
.actions_list = quad8_synapse_actions_list, \
.num_actions = ARRAY_SIZE(quad8_synapse_actions_list), \
.signal = quad8_signals + 2 * (_id) + 1 \
}, \
{ \
.actions_list = quad8_index_actions_list, \
.num_actions = ARRAY_SIZE(quad8_index_actions_list), \
.signal = quad8_signals + 2 * (_id) + 16 \
} \
}
static struct counter_synapse quad8_count_synapses[][3] = {
QUAD8_COUNT_SYNAPSES(0), QUAD8_COUNT_SYNAPSES(1),
QUAD8_COUNT_SYNAPSES(2), QUAD8_COUNT_SYNAPSES(3),
QUAD8_COUNT_SYNAPSES(4), QUAD8_COUNT_SYNAPSES(5),
QUAD8_COUNT_SYNAPSES(6), QUAD8_COUNT_SYNAPSES(7)
};
counter: Internalize sysfs interface code This is a reimplementation of the Generic Counter driver interface. There are no modifications to the Counter subsystem userspace interface, so existing userspace applications should continue to run seamlessly. The purpose of this patch is to internalize the sysfs interface code among the various counter drivers into a shared module. Counter drivers pass and take data natively (i.e. u8, u64, etc.) and the shared counter module handles the translation between the sysfs interface and the device drivers. This guarantees a standard userspace interface for all counter drivers, and helps generalize the Generic Counter driver ABI in order to support the Generic Counter chrdev interface (introduced in a subsequent patch) without significant changes to the existing counter drivers. Note, Counter device registration is the same as before: drivers populate a struct counter_device with components and callbacks, then pass the structure to the devm_counter_register function. However, what's different now is how the Counter subsystem code handles this registration internally. Whereas before callbacks would interact directly with sysfs data, this interaction is now abstracted and instead callbacks interact with native C data types. The counter_comp structure forms the basis for Counter extensions. The counter-sysfs.c file contains the code to parse through the counter_device structure and register the requested components and extensions. Attributes are created and populated based on type, with respective translation functions to handle the mapping between sysfs and the counter driver callbacks. The translation performed for each attribute is straightforward: the attribute type and data is parsed from the counter_attribute structure, the respective counter driver read/write callback is called, and sysfs I/O is handled before or after the driver read/write function is called. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> # for stm32 Link: https://lore.kernel.org/r/c68b4a1ffb195c1a2f65e8dd5ad7b7c14e79c6ef.1630031207.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-27 03:47:47 +00:00
static const enum counter_count_mode quad8_cnt_modes[] = {
COUNTER_COUNT_MODE_NORMAL,
COUNTER_COUNT_MODE_RANGE_LIMIT,
COUNTER_COUNT_MODE_NON_RECYCLE,
COUNTER_COUNT_MODE_MODULO_N,
};
static DEFINE_COUNTER_AVAILABLE(quad8_count_mode_available, quad8_cnt_modes);
static DEFINE_COUNTER_ENUM(quad8_error_noise_enum, quad8_noise_error_states);
static struct counter_comp quad8_count_ext[] = {
COUNTER_COMP_CEILING(quad8_count_ceiling_read,
quad8_count_ceiling_write),
COUNTER_COMP_FLOOR(quad8_count_floor_read, NULL),
COUNTER_COMP_COUNT_MODE(quad8_count_mode_read, quad8_count_mode_write,
quad8_count_mode_available),
COUNTER_COMP_DIRECTION(quad8_direction_read),
COUNTER_COMP_ENABLE(quad8_count_enable_read, quad8_count_enable_write),
COUNTER_COMP_COUNT_ENUM("error_noise", quad8_error_noise_get, NULL,
quad8_error_noise_enum),
COUNTER_COMP_PRESET(quad8_count_preset_read, quad8_count_preset_write),
COUNTER_COMP_PRESET_ENABLE(quad8_count_preset_enable_read,
quad8_count_preset_enable_write),
};
#define QUAD8_COUNT(_id, _cntname) { \
.id = (_id), \
.name = (_cntname), \
.functions_list = quad8_count_functions_list, \
.num_functions = ARRAY_SIZE(quad8_count_functions_list), \
.synapses = quad8_count_synapses[(_id)], \
.num_synapses = 2, \
.ext = quad8_count_ext, \
.num_ext = ARRAY_SIZE(quad8_count_ext) \
}
static struct counter_count quad8_counts[] = {
QUAD8_COUNT(0, "Channel 1 Count"),
QUAD8_COUNT(1, "Channel 2 Count"),
QUAD8_COUNT(2, "Channel 3 Count"),
QUAD8_COUNT(3, "Channel 4 Count"),
QUAD8_COUNT(4, "Channel 5 Count"),
QUAD8_COUNT(5, "Channel 6 Count"),
QUAD8_COUNT(6, "Channel 7 Count"),
QUAD8_COUNT(7, "Channel 8 Count")
};
static int quad8_probe(struct device *dev, unsigned int id)
{
struct quad8 *priv;
int i, j;
unsigned int base_offset;
if (!devm_request_region(dev, base[id], QUAD8_EXTENT, dev_name(dev))) {
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
base[id], base[id] + QUAD8_EXTENT);
return -EBUSY;
}
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
/* Initialize Counter device and driver data */
priv->counter.name = dev_name(dev);
priv->counter.parent = dev;
priv->counter.ops = &quad8_ops;
priv->counter.counts = quad8_counts;
priv->counter.num_counts = ARRAY_SIZE(quad8_counts);
priv->counter.signals = quad8_signals;
priv->counter.num_signals = ARRAY_SIZE(quad8_signals);
priv->counter.priv = priv;
priv->base = base[id];
/* Initialize mutex */
mutex_init(&priv->lock);
/* Reset all counters and disable interrupt function */
outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
/* Set initial configuration for all counters */
for (i = 0; i < QUAD8_NUM_COUNTERS; i++) {
base_offset = base[id] + 2 * i;
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
/* Reset filter clock factor */
outb(0, base_offset);
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_PRESET_PSC,
base_offset + 1);
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
/* Reset Preset Register */
for (j = 0; j < 3; j++)
outb(0x00, base_offset);
/* Reset Borrow, Carry, Compare, and Sign flags */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_FLAGS, base_offset + 1);
/* Reset Error flag */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
/* Binary encoding; Normal count; non-quadrature mode */
outb(QUAD8_CTR_CMR, base_offset + 1);
/* Disable A and B inputs; preset on index; FLG1 as Carry */
outb(QUAD8_CTR_IOR, base_offset + 1);
/* Disable index function; negative index polarity */
outb(QUAD8_CTR_IDR, base_offset + 1);
}
/* Disable Differential Encoder Cable Status for all channels */
outb(0xFF, base[id] + QUAD8_DIFF_ENCODER_CABLE_STATUS);
/* Enable all counters */
outb(QUAD8_CHAN_OP_ENABLE_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
return devm_counter_register(dev, &priv->counter);
}
static struct isa_driver quad8_driver = {
.probe = quad8_probe,
.driver = {
.name = "104-quad-8"
}
};
module_isa_driver(quad8_driver, num_quad8);
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
MODULE_DESCRIPTION("ACCES 104-QUAD-8 driver");
MODULE_LICENSE("GPL v2");