[media] staging/media: Use pr_ printks in lirc/lirc_sir.c

fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
and add pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
YAMANE Toshiaki 2012-11-08 15:53:37 -03:00 committed by Mauro Carvalho Chehab
parent e174e6cac6
commit 014f006642

View file

@ -33,6 +33,8 @@
* parts cut'n'pasted from sa1100_ir.c (C) 2000 Russell King
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/errno.h>
@ -495,7 +497,7 @@ static int init_chrdev(void)
driver.dev = &lirc_sir_dev->dev;
driver.minor = lirc_register_driver(&driver);
if (driver.minor < 0) {
printk(KERN_ERR LIRC_DRIVER_NAME ": init_chrdev() failed.\n");
pr_err("init_chrdev() failed.\n");
return -EIO;
}
return 0;
@ -604,7 +606,7 @@ static irqreturn_t sir_interrupt(int irq, void *dev_id)
}
if (status & UTSR0_TFS)
printk(KERN_ERR "transmit fifo not full, shouldn't happen\n");
pr_err("transmit fifo not full, shouldn't happen\n");
/* We must clear certain bits. */
status &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
@ -787,7 +789,7 @@ static int init_hardware(void)
#ifdef LIRC_ON_SA1100
#ifdef CONFIG_SA1100_BITSY
if (machine_is_bitsy()) {
printk(KERN_INFO "Power on IR module\n");
pr_info("Power on IR module\n");
set_bitsy_egpio(EGPIO_BITSY_IR_ON);
}
#endif
@ -885,8 +887,7 @@ static int init_hardware(void)
udelay(1500);
/* read previous control byte */
printk(KERN_INFO LIRC_DRIVER_NAME
": 0x%02x\n", sinp(UART_RX));
pr_info("0x%02x\n", sinp(UART_RX));
/* Set DLAB 1. */
soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
@ -964,8 +965,7 @@ static int init_port(void)
/* get I/O port access and IRQ line */
#ifndef LIRC_ON_SA1100
if (request_region(io, 8, LIRC_DRIVER_NAME) == NULL) {
printk(KERN_ERR LIRC_DRIVER_NAME
": i/o port 0x%.4x already in use.\n", io);
pr_err("i/o port 0x%.4x already in use.\n", io);
return -EBUSY;
}
#endif
@ -975,15 +975,11 @@ static int init_port(void)
# ifndef LIRC_ON_SA1100
release_region(io, 8);
# endif
printk(KERN_ERR LIRC_DRIVER_NAME
": IRQ %d already in use.\n",
irq);
pr_err("IRQ %d already in use.\n", irq);
return retval;
}
#ifndef LIRC_ON_SA1100
printk(KERN_INFO LIRC_DRIVER_NAME
": I/O port 0x%.4x, IRQ %d.\n",
io, irq);
pr_info("I/O port 0x%.4x, IRQ %d.\n", io, irq);
#endif
init_timer(&timerlist);
@ -1213,8 +1209,7 @@ static int init_lirc_sir(void)
if (retval < 0)
return retval;
init_hardware();
printk(KERN_INFO LIRC_DRIVER_NAME
": Installed.\n");
pr_info("Installed.\n");
return 0;
}
@ -1243,23 +1238,20 @@ static int __init lirc_sir_init(void)
retval = platform_driver_register(&lirc_sir_driver);
if (retval) {
printk(KERN_ERR LIRC_DRIVER_NAME ": Platform driver register "
"failed!\n");
pr_err("Platform driver register failed!\n");
return -ENODEV;
}
lirc_sir_dev = platform_device_alloc("lirc_dev", 0);
if (!lirc_sir_dev) {
printk(KERN_ERR LIRC_DRIVER_NAME ": Platform device alloc "
"failed!\n");
pr_err("Platform device alloc failed!\n");
retval = -ENOMEM;
goto pdev_alloc_fail;
}
retval = platform_device_add(lirc_sir_dev);
if (retval) {
printk(KERN_ERR LIRC_DRIVER_NAME ": Platform device add "
"failed!\n");
pr_err("Platform device add failed!\n");
retval = -ENODEV;
goto pdev_add_fail;
}
@ -1292,7 +1284,7 @@ static void __exit lirc_sir_exit(void)
drop_port();
platform_device_unregister(lirc_sir_dev);
platform_driver_unregister(&lirc_sir_driver);
printk(KERN_INFO LIRC_DRIVER_NAME ": Uninstalled.\n");
pr_info("Uninstalled.\n");
}
module_init(lirc_sir_init);