mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 08:19:28 +00:00
mtd: nand: remove the rtc_from4 driver support
The AG-AND support is about to be removed from MTD, because this technology is dead for long time. Thus, remove this the only AG-AND driver we have in the kernel tree. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This commit is contained in:
parent
b9c637b56c
commit
02f57fe448
3 changed files with 0 additions and 635 deletions
|
@ -193,16 +193,6 @@ config MTD_NAND_BF5XX_BOOTROM_ECC
|
|||
|
||||
If unsure, say N.
|
||||
|
||||
config MTD_NAND_RTC_FROM4
|
||||
tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
|
||||
depends on SH_SOLUTION_ENGINE
|
||||
select REED_SOLOMON
|
||||
select REED_SOLOMON_DEC8
|
||||
select BITREVERSE
|
||||
help
|
||||
This enables the driver for the Renesas Technology AG-AND
|
||||
flash interface board (FROM_BOARD4)
|
||||
|
||||
config MTD_NAND_PPCHAMELEONEVB
|
||||
tristate "NAND Flash device on PPChameleonEVB board"
|
||||
depends on PPCHAMELEONEVB && BROKEN
|
||||
|
|
|
@ -22,7 +22,6 @@ obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o
|
|||
obj-$(CONFIG_MTD_NAND_DOCG4) += docg4.o
|
||||
obj-$(CONFIG_MTD_NAND_FSMC) += fsmc_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_H1900) += h1910.o
|
||||
obj-$(CONFIG_MTD_NAND_RTC_FROM4) += rtc_from4.o
|
||||
obj-$(CONFIG_MTD_NAND_SHARPSL) += sharpsl.o
|
||||
obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
|
||||
obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
|
||||
|
|
|
@ -1,624 +0,0 @@
|
|||
/*
|
||||
* drivers/mtd/nand/rtc_from4.c
|
||||
*
|
||||
* Copyright (C) 2004 Red Hat, Inc.
|
||||
*
|
||||
* Derived from drivers/mtd/nand/spia.c
|
||||
* Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* Overview:
|
||||
* This is a device driver for the AG-AND flash device found on the
|
||||
* Renesas Technology Corp. Flash ROM 4-slot interface board (FROM_BOARD4),
|
||||
* which utilizes the Renesas HN29V1G91T-30 part.
|
||||
* This chip is a 1 GBibit (128MiB x 8 bits) AG-AND flash device.
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/rslib.h>
|
||||
#include <linux/bitrev.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
/*
|
||||
* MTD structure for Renesas board
|
||||
*/
|
||||
static struct mtd_info *rtc_from4_mtd = NULL;
|
||||
|
||||
#define RTC_FROM4_MAX_CHIPS 2
|
||||
|
||||
/* HS77x9 processor register defines */
|
||||
#define SH77X9_BCR1 ((volatile unsigned short *)(0xFFFFFF60))
|
||||
#define SH77X9_BCR2 ((volatile unsigned short *)(0xFFFFFF62))
|
||||
#define SH77X9_WCR1 ((volatile unsigned short *)(0xFFFFFF64))
|
||||
#define SH77X9_WCR2 ((volatile unsigned short *)(0xFFFFFF66))
|
||||
#define SH77X9_MCR ((volatile unsigned short *)(0xFFFFFF68))
|
||||
#define SH77X9_PCR ((volatile unsigned short *)(0xFFFFFF6C))
|
||||
#define SH77X9_FRQCR ((volatile unsigned short *)(0xFFFFFF80))
|
||||
|
||||
/*
|
||||
* Values specific to the Renesas Technology Corp. FROM_BOARD4 (used with HS77x9 processor)
|
||||
*/
|
||||
/* Address where flash is mapped */
|
||||
#define RTC_FROM4_FIO_BASE 0x14000000
|
||||
|
||||
/* CLE and ALE are tied to address lines 5 & 4, respectively */
|
||||
#define RTC_FROM4_CLE (1 << 5)
|
||||
#define RTC_FROM4_ALE (1 << 4)
|
||||
|
||||
/* address lines A24-A22 used for chip selection */
|
||||
#define RTC_FROM4_NAND_ADDR_SLOT3 (0x00800000)
|
||||
#define RTC_FROM4_NAND_ADDR_SLOT4 (0x00C00000)
|
||||
#define RTC_FROM4_NAND_ADDR_FPGA (0x01000000)
|
||||
/* mask address lines A24-A22 used for chip selection */
|
||||
#define RTC_FROM4_NAND_ADDR_MASK (RTC_FROM4_NAND_ADDR_SLOT3 | RTC_FROM4_NAND_ADDR_SLOT4 | RTC_FROM4_NAND_ADDR_FPGA)
|
||||
|
||||
/* FPGA status register for checking device ready (bit zero) */
|
||||
#define RTC_FROM4_FPGA_SR (RTC_FROM4_NAND_ADDR_FPGA | 0x00000002)
|
||||
#define RTC_FROM4_DEVICE_READY 0x0001
|
||||
|
||||
/* FPGA Reed-Solomon ECC Control register */
|
||||
|
||||
#define RTC_FROM4_RS_ECC_CTL (RTC_FROM4_NAND_ADDR_FPGA | 0x00000050)
|
||||
#define RTC_FROM4_RS_ECC_CTL_CLR (1 << 7)
|
||||
#define RTC_FROM4_RS_ECC_CTL_GEN (1 << 6)
|
||||
#define RTC_FROM4_RS_ECC_CTL_FD_E (1 << 5)
|
||||
|
||||
/* FPGA Reed-Solomon ECC code base */
|
||||
#define RTC_FROM4_RS_ECC (RTC_FROM4_NAND_ADDR_FPGA | 0x00000060)
|
||||
#define RTC_FROM4_RS_ECCN (RTC_FROM4_NAND_ADDR_FPGA | 0x00000080)
|
||||
|
||||
/* FPGA Reed-Solomon ECC check register */
|
||||
#define RTC_FROM4_RS_ECC_CHK (RTC_FROM4_NAND_ADDR_FPGA | 0x00000070)
|
||||
#define RTC_FROM4_RS_ECC_CHK_ERROR (1 << 7)
|
||||
|
||||
#define ERR_STAT_ECC_AVAILABLE 0x20
|
||||
|
||||
/* Undefine for software ECC */
|
||||
#define RTC_FROM4_HWECC 1
|
||||
|
||||
/* Define as 1 for no virtual erase blocks (in JFFS2) */
|
||||
#define RTC_FROM4_NO_VIRTBLOCKS 0
|
||||
|
||||
/*
|
||||
* Module stuff
|
||||
*/
|
||||
static void __iomem *rtc_from4_fio_base = (void *)P2SEGADDR(RTC_FROM4_FIO_BASE);
|
||||
|
||||
static const struct mtd_partition partition_info[] = {
|
||||
{
|
||||
.name = "Renesas flash partition 1",
|
||||
.offset = 0,
|
||||
.size = MTDPART_SIZ_FULL},
|
||||
};
|
||||
|
||||
#define NUM_PARTITIONS 1
|
||||
|
||||
/*
|
||||
* hardware specific flash bbt decriptors
|
||||
* Note: this is to allow debugging by disabling
|
||||
* NAND_BBT_CREATE and/or NAND_BBT_WRITE
|
||||
*
|
||||
*/
|
||||
static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' };
|
||||
static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' };
|
||||
|
||||
static struct nand_bbt_descr rtc_from4_bbt_main_descr = {
|
||||
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
|
||||
| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
|
||||
.offs = 40,
|
||||
.len = 4,
|
||||
.veroffs = 44,
|
||||
.maxblocks = 4,
|
||||
.pattern = bbt_pattern
|
||||
};
|
||||
|
||||
static struct nand_bbt_descr rtc_from4_bbt_mirror_descr = {
|
||||
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
|
||||
| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
|
||||
.offs = 40,
|
||||
.len = 4,
|
||||
.veroffs = 44,
|
||||
.maxblocks = 4,
|
||||
.pattern = mirror_pattern
|
||||
};
|
||||
|
||||
#ifdef RTC_FROM4_HWECC
|
||||
|
||||
/* the Reed Solomon control structure */
|
||||
static struct rs_control *rs_decoder;
|
||||
|
||||
/*
|
||||
* hardware specific Out Of Band information
|
||||
*/
|
||||
static struct nand_ecclayout rtc_from4_nand_oobinfo = {
|
||||
.eccbytes = 32,
|
||||
.eccpos = {
|
||||
0, 1, 2, 3, 4, 5, 6, 7,
|
||||
8, 9, 10, 11, 12, 13, 14, 15,
|
||||
16, 17, 18, 19, 20, 21, 22, 23,
|
||||
24, 25, 26, 27, 28, 29, 30, 31},
|
||||
.oobfree = {{32, 32}}
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
/*
|
||||
* rtc_from4_hwcontrol - hardware specific access to control-lines
|
||||
* @mtd: MTD device structure
|
||||
* @cmd: hardware control command
|
||||
*
|
||||
* Address lines (A5 and A4) are used to control Command and Address Latch
|
||||
* Enable on this board, so set the read/write address appropriately.
|
||||
*
|
||||
* Chip Enable is also controlled by the Chip Select (CS5) and
|
||||
* Address lines (A24-A22), so no action is required here.
|
||||
*
|
||||
*/
|
||||
static void rtc_from4_hwcontrol(struct mtd_info *mtd, int cmd,
|
||||
unsigned int ctrl)
|
||||
{
|
||||
struct nand_chip *chip = (mtd->priv);
|
||||
|
||||
if (cmd == NAND_CMD_NONE)
|
||||
return;
|
||||
|
||||
if (ctrl & NAND_CLE)
|
||||
writeb(cmd, chip->IO_ADDR_W | RTC_FROM4_CLE);
|
||||
else
|
||||
writeb(cmd, chip->IO_ADDR_W | RTC_FROM4_ALE);
|
||||
}
|
||||
|
||||
/*
|
||||
* rtc_from4_nand_select_chip - hardware specific chip select
|
||||
* @mtd: MTD device structure
|
||||
* @chip: Chip to select (0 == slot 3, 1 == slot 4)
|
||||
*
|
||||
* The chip select is based on address lines A24-A22.
|
||||
* This driver uses flash slots 3 and 4 (A23-A22).
|
||||
*
|
||||
*/
|
||||
static void rtc_from4_nand_select_chip(struct mtd_info *mtd, int chip)
|
||||
{
|
||||
struct nand_chip *this = mtd->priv;
|
||||
|
||||
this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R & ~RTC_FROM4_NAND_ADDR_MASK);
|
||||
this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_NAND_ADDR_MASK);
|
||||
|
||||
switch (chip) {
|
||||
|
||||
case 0: /* select slot 3 chip */
|
||||
this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R | RTC_FROM4_NAND_ADDR_SLOT3);
|
||||
this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_NAND_ADDR_SLOT3);
|
||||
break;
|
||||
case 1: /* select slot 4 chip */
|
||||
this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R | RTC_FROM4_NAND_ADDR_SLOT4);
|
||||
this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_NAND_ADDR_SLOT4);
|
||||
break;
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* rtc_from4_nand_device_ready - hardware specific ready/busy check
|
||||
* @mtd: MTD device structure
|
||||
*
|
||||
* This board provides the Ready/Busy state in the status register
|
||||
* of the FPGA. Bit zero indicates the RDY(1)/BSY(0) signal.
|
||||
*
|
||||
*/
|
||||
static int rtc_from4_nand_device_ready(struct mtd_info *mtd)
|
||||
{
|
||||
unsigned short status;
|
||||
|
||||
status = *((volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_FPGA_SR));
|
||||
|
||||
return (status & RTC_FROM4_DEVICE_READY);
|
||||
|
||||
}
|
||||
|
||||
/*
|
||||
* deplete - code to perform device recovery in case there was a power loss
|
||||
* @mtd: MTD device structure
|
||||
* @chip: Chip to select (0 == slot 3, 1 == slot 4)
|
||||
*
|
||||
* If there was a sudden loss of power during an erase operation, a
|
||||
* "device recovery" operation must be performed when power is restored
|
||||
* to ensure correct operation. This routine performs the required steps
|
||||
* for the requested chip.
|
||||
*
|
||||
* See page 86 of the data sheet for details.
|
||||
*
|
||||
*/
|
||||
static void deplete(struct mtd_info *mtd, int chip)
|
||||
{
|
||||
struct nand_chip *this = mtd->priv;
|
||||
|
||||
/* wait until device is ready */
|
||||
while (!this->dev_ready(mtd)) ;
|
||||
|
||||
this->select_chip(mtd, chip);
|
||||
|
||||
/* Send the commands for device recovery, phase 1 */
|
||||
this->cmdfunc(mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0000);
|
||||
this->cmdfunc(mtd, NAND_CMD_DEPLETE2, -1, -1);
|
||||
|
||||
/* Send the commands for device recovery, phase 2 */
|
||||
this->cmdfunc(mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0004);
|
||||
this->cmdfunc(mtd, NAND_CMD_DEPLETE2, -1, -1);
|
||||
|
||||
}
|
||||
|
||||
#ifdef RTC_FROM4_HWECC
|
||||
/*
|
||||
* rtc_from4_enable_hwecc - hardware specific hardware ECC enable function
|
||||
* @mtd: MTD device structure
|
||||
* @mode: I/O mode; read or write
|
||||
*
|
||||
* enable hardware ECC for data read or write
|
||||
*
|
||||
*/
|
||||
static void rtc_from4_enable_hwecc(struct mtd_info *mtd, int mode)
|
||||
{
|
||||
volatile unsigned short *rs_ecc_ctl = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CTL);
|
||||
unsigned short status;
|
||||
|
||||
switch (mode) {
|
||||
case NAND_ECC_READ:
|
||||
status = RTC_FROM4_RS_ECC_CTL_CLR | RTC_FROM4_RS_ECC_CTL_FD_E;
|
||||
|
||||
*rs_ecc_ctl = status;
|
||||
break;
|
||||
|
||||
case NAND_ECC_READSYN:
|
||||
status = 0x00;
|
||||
|
||||
*rs_ecc_ctl = status;
|
||||
break;
|
||||
|
||||
case NAND_ECC_WRITE:
|
||||
status = RTC_FROM4_RS_ECC_CTL_CLR | RTC_FROM4_RS_ECC_CTL_GEN | RTC_FROM4_RS_ECC_CTL_FD_E;
|
||||
|
||||
*rs_ecc_ctl = status;
|
||||
break;
|
||||
|
||||
default:
|
||||
BUG();
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/*
|
||||
* rtc_from4_calculate_ecc - hardware specific code to read ECC code
|
||||
* @mtd: MTD device structure
|
||||
* @dat: buffer containing the data to generate ECC codes
|
||||
* @ecc_code ECC codes calculated
|
||||
*
|
||||
* The ECC code is calculated by the FPGA. All we have to do is read the values
|
||||
* from the FPGA registers.
|
||||
*
|
||||
* Note: We read from the inverted registers, since data is inverted before
|
||||
* the code is calculated. So all 0xff data (blank page) results in all 0xff rs code
|
||||
*
|
||||
*/
|
||||
static void rtc_from4_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
|
||||
{
|
||||
volatile unsigned short *rs_eccn = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECCN);
|
||||
unsigned short value;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < 8; i++) {
|
||||
value = *rs_eccn;
|
||||
ecc_code[i] = (unsigned char)value;
|
||||
rs_eccn++;
|
||||
}
|
||||
ecc_code[7] |= 0x0f; /* set the last four bits (not used) */
|
||||
}
|
||||
|
||||
/*
|
||||
* rtc_from4_correct_data - hardware specific code to correct data using ECC code
|
||||
* @mtd: MTD device structure
|
||||
* @buf: buffer containing the data to generate ECC codes
|
||||
* @ecc1 ECC codes read
|
||||
* @ecc2 ECC codes calculated
|
||||
*
|
||||
* The FPGA tells us fast, if there's an error or not. If no, we go back happy
|
||||
* else we read the ecc results from the fpga and call the rs library to decode
|
||||
* and hopefully correct the error.
|
||||
*
|
||||
*/
|
||||
static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_char *ecc1, u_char *ecc2)
|
||||
{
|
||||
int i, j, res;
|
||||
unsigned short status;
|
||||
uint16_t par[6], syn[6];
|
||||
uint8_t ecc[8];
|
||||
volatile unsigned short *rs_ecc;
|
||||
|
||||
status = *((volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CHK));
|
||||
|
||||
if (!(status & RTC_FROM4_RS_ECC_CHK_ERROR)) {
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Read the syndrome pattern from the FPGA and correct the bitorder */
|
||||
rs_ecc = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC);
|
||||
for (i = 0; i < 8; i++) {
|
||||
ecc[i] = bitrev8(*rs_ecc);
|
||||
rs_ecc++;
|
||||
}
|
||||
|
||||
/* convert into 6 10bit syndrome fields */
|
||||
par[5] = rs_decoder->index_of[(((uint16_t) ecc[0] >> 0) & 0x0ff) | (((uint16_t) ecc[1] << 8) & 0x300)];
|
||||
par[4] = rs_decoder->index_of[(((uint16_t) ecc[1] >> 2) & 0x03f) | (((uint16_t) ecc[2] << 6) & 0x3c0)];
|
||||
par[3] = rs_decoder->index_of[(((uint16_t) ecc[2] >> 4) & 0x00f) | (((uint16_t) ecc[3] << 4) & 0x3f0)];
|
||||
par[2] = rs_decoder->index_of[(((uint16_t) ecc[3] >> 6) & 0x003) | (((uint16_t) ecc[4] << 2) & 0x3fc)];
|
||||
par[1] = rs_decoder->index_of[(((uint16_t) ecc[5] >> 0) & 0x0ff) | (((uint16_t) ecc[6] << 8) & 0x300)];
|
||||
par[0] = (((uint16_t) ecc[6] >> 2) & 0x03f) | (((uint16_t) ecc[7] << 6) & 0x3c0);
|
||||
|
||||
/* Convert to computable syndrome */
|
||||
for (i = 0; i < 6; i++) {
|
||||
syn[i] = par[0];
|
||||
for (j = 1; j < 6; j++)
|
||||
if (par[j] != rs_decoder->nn)
|
||||
syn[i] ^= rs_decoder->alpha_to[rs_modnn(rs_decoder, par[j] + i * j)];
|
||||
|
||||
/* Convert to index form */
|
||||
syn[i] = rs_decoder->index_of[syn[i]];
|
||||
}
|
||||
|
||||
/* Let the library code do its magic. */
|
||||
res = decode_rs8(rs_decoder, (uint8_t *) buf, par, 512, syn, 0, NULL, 0xff, NULL);
|
||||
if (res > 0) {
|
||||
pr_debug("rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res);
|
||||
}
|
||||
return res;
|
||||
}
|
||||
|
||||
/**
|
||||
* rtc_from4_errstat - perform additional error status checks
|
||||
* @mtd: MTD device structure
|
||||
* @this: NAND chip structure
|
||||
* @state: state or the operation
|
||||
* @status: status code returned from read status
|
||||
* @page: startpage inside the chip, must be called with (page & this->pagemask)
|
||||
*
|
||||
* Perform additional error status checks on erase and write failures
|
||||
* to determine if errors are correctable. For this device, correctable
|
||||
* 1-bit errors on erase and write are considered acceptable.
|
||||
*
|
||||
* note: see pages 34..37 of data sheet for details.
|
||||
*
|
||||
*/
|
||||
static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this,
|
||||
int state, int status, int page)
|
||||
{
|
||||
int er_stat = 0;
|
||||
int rtn, retlen;
|
||||
size_t len;
|
||||
uint8_t *buf;
|
||||
int i;
|
||||
|
||||
this->cmdfunc(mtd, NAND_CMD_STATUS_CLEAR, -1, -1);
|
||||
|
||||
if (state == FL_ERASING) {
|
||||
|
||||
for (i = 0; i < 4; i++) {
|
||||
if (!(status & 1 << (i + 1)))
|
||||
continue;
|
||||
this->cmdfunc(mtd, (NAND_CMD_STATUS_ERROR + i + 1),
|
||||
-1, -1);
|
||||
rtn = this->read_byte(mtd);
|
||||
this->cmdfunc(mtd, NAND_CMD_STATUS_RESET, -1, -1);
|
||||
|
||||
/* err_ecc_not_avail */
|
||||
if (!(rtn & ERR_STAT_ECC_AVAILABLE))
|
||||
er_stat |= 1 << (i + 1);
|
||||
}
|
||||
|
||||
} else if (state == FL_WRITING) {
|
||||
|
||||
unsigned long corrected = mtd->ecc_stats.corrected;
|
||||
|
||||
/* single bank write logic */
|
||||
this->cmdfunc(mtd, NAND_CMD_STATUS_ERROR, -1, -1);
|
||||
rtn = this->read_byte(mtd);
|
||||
this->cmdfunc(mtd, NAND_CMD_STATUS_RESET, -1, -1);
|
||||
|
||||
if (!(rtn & ERR_STAT_ECC_AVAILABLE)) {
|
||||
/* err_ecc_not_avail */
|
||||
er_stat |= 1 << 1;
|
||||
goto out;
|
||||
}
|
||||
|
||||
len = mtd->writesize;
|
||||
buf = kmalloc(len, GFP_KERNEL);
|
||||
if (!buf) {
|
||||
er_stat = 1;
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* recovery read */
|
||||
rtn = nand_do_read(mtd, page, len, &retlen, buf);
|
||||
|
||||
/* if read failed or > 1-bit error corrected */
|
||||
if (rtn || (mtd->ecc_stats.corrected - corrected) > 1)
|
||||
er_stat |= 1 << 1;
|
||||
kfree(buf);
|
||||
}
|
||||
out:
|
||||
rtn = status;
|
||||
if (er_stat == 0) { /* if ECC is available */
|
||||
rtn = (status & ~NAND_STATUS_FAIL); /* clear the error bit */
|
||||
}
|
||||
|
||||
return rtn;
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Main initialization routine
|
||||
*/
|
||||
static int __init rtc_from4_init(void)
|
||||
{
|
||||
struct nand_chip *this;
|
||||
unsigned short bcr1, bcr2, wcr2;
|
||||
int i;
|
||||
int ret;
|
||||
|
||||
/* Allocate memory for MTD device structure and private data */
|
||||
rtc_from4_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
|
||||
if (!rtc_from4_mtd) {
|
||||
printk("Unable to allocate Renesas NAND MTD device structure.\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
/* Get pointer to private data */
|
||||
this = (struct nand_chip *)(&rtc_from4_mtd[1]);
|
||||
|
||||
/* Initialize structures */
|
||||
memset(rtc_from4_mtd, 0, sizeof(struct mtd_info));
|
||||
memset(this, 0, sizeof(struct nand_chip));
|
||||
|
||||
/* Link the private data with the MTD structure */
|
||||
rtc_from4_mtd->priv = this;
|
||||
rtc_from4_mtd->owner = THIS_MODULE;
|
||||
|
||||
/* set area 5 as PCMCIA mode to clear the spec of tDH(Data hold time;9ns min) */
|
||||
bcr1 = *SH77X9_BCR1 & ~0x0002;
|
||||
bcr1 |= 0x0002;
|
||||
*SH77X9_BCR1 = bcr1;
|
||||
|
||||
/* set */
|
||||
bcr2 = *SH77X9_BCR2 & ~0x0c00;
|
||||
bcr2 |= 0x0800;
|
||||
*SH77X9_BCR2 = bcr2;
|
||||
|
||||
/* set area 5 wait states */
|
||||
wcr2 = *SH77X9_WCR2 & ~0x1c00;
|
||||
wcr2 |= 0x1c00;
|
||||
*SH77X9_WCR2 = wcr2;
|
||||
|
||||
/* Set address of NAND IO lines */
|
||||
this->IO_ADDR_R = rtc_from4_fio_base;
|
||||
this->IO_ADDR_W = rtc_from4_fio_base;
|
||||
/* Set address of hardware control function */
|
||||
this->cmd_ctrl = rtc_from4_hwcontrol;
|
||||
/* Set address of chip select function */
|
||||
this->select_chip = rtc_from4_nand_select_chip;
|
||||
/* command delay time (in us) */
|
||||
this->chip_delay = 100;
|
||||
/* return the status of the Ready/Busy line */
|
||||
this->dev_ready = rtc_from4_nand_device_ready;
|
||||
|
||||
#ifdef RTC_FROM4_HWECC
|
||||
printk(KERN_INFO "rtc_from4_init: using hardware ECC detection.\n");
|
||||
|
||||
this->ecc.mode = NAND_ECC_HW_SYNDROME;
|
||||
this->ecc.size = 512;
|
||||
this->ecc.bytes = 8;
|
||||
this->ecc.strength = 3;
|
||||
/* return the status of extra status and ECC checks */
|
||||
this->errstat = rtc_from4_errstat;
|
||||
/* set the nand_oobinfo to support FPGA H/W error detection */
|
||||
this->ecc.layout = &rtc_from4_nand_oobinfo;
|
||||
this->ecc.hwctl = rtc_from4_enable_hwecc;
|
||||
this->ecc.calculate = rtc_from4_calculate_ecc;
|
||||
this->ecc.correct = rtc_from4_correct_data;
|
||||
|
||||
/* We could create the decoder on demand, if memory is a concern.
|
||||
* This way we have it handy, if an error happens
|
||||
*
|
||||
* Symbolsize is 10 (bits)
|
||||
* Primitve polynomial is x^10+x^3+1
|
||||
* first consecutive root is 0
|
||||
* primitve element to generate roots = 1
|
||||
* generator polinomial degree = 6
|
||||
*/
|
||||
rs_decoder = init_rs(10, 0x409, 0, 1, 6);
|
||||
if (!rs_decoder) {
|
||||
printk(KERN_ERR "Could not create a RS decoder\n");
|
||||
ret = -ENOMEM;
|
||||
goto err_1;
|
||||
}
|
||||
#else
|
||||
printk(KERN_INFO "rtc_from4_init: using software ECC detection.\n");
|
||||
|
||||
this->ecc.mode = NAND_ECC_SOFT;
|
||||
#endif
|
||||
|
||||
/* set the bad block tables to support debugging */
|
||||
this->bbt_td = &rtc_from4_bbt_main_descr;
|
||||
this->bbt_md = &rtc_from4_bbt_mirror_descr;
|
||||
|
||||
/* Scan to find existence of the device */
|
||||
if (nand_scan(rtc_from4_mtd, RTC_FROM4_MAX_CHIPS)) {
|
||||
ret = -ENXIO;
|
||||
goto err_2;
|
||||
}
|
||||
|
||||
/* Perform 'device recovery' for each chip in case there was a power loss. */
|
||||
for (i = 0; i < this->numchips; i++) {
|
||||
deplete(rtc_from4_mtd, i);
|
||||
}
|
||||
|
||||
#if RTC_FROM4_NO_VIRTBLOCKS
|
||||
/* use a smaller erase block to minimize wasted space when a block is bad */
|
||||
/* note: this uses eight times as much RAM as using the default and makes */
|
||||
/* mounts take four times as long. */
|
||||
rtc_from4_mtd->flags |= MTD_NO_VIRTBLOCKS;
|
||||
#endif
|
||||
|
||||
/* Register the partitions */
|
||||
ret = mtd_device_register(rtc_from4_mtd, partition_info,
|
||||
NUM_PARTITIONS);
|
||||
if (ret)
|
||||
goto err_3;
|
||||
|
||||
/* Return happy */
|
||||
return 0;
|
||||
err_3:
|
||||
nand_release(rtc_from4_mtd);
|
||||
err_2:
|
||||
free_rs(rs_decoder);
|
||||
err_1:
|
||||
kfree(rtc_from4_mtd);
|
||||
return ret;
|
||||
}
|
||||
|
||||
module_init(rtc_from4_init);
|
||||
|
||||
/*
|
||||
* Clean up routine
|
||||
*/
|
||||
static void __exit rtc_from4_cleanup(void)
|
||||
{
|
||||
/* Release resource, unregister partitions */
|
||||
nand_release(rtc_from4_mtd);
|
||||
|
||||
/* Free the MTD device structure */
|
||||
kfree(rtc_from4_mtd);
|
||||
|
||||
#ifdef RTC_FROM4_HWECC
|
||||
/* Free the reed solomon resources */
|
||||
if (rs_decoder) {
|
||||
free_rs(rs_decoder);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
module_exit(rtc_from4_cleanup);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("d.marlin <dmarlin@redhat.com");
|
||||
MODULE_DESCRIPTION("Board-specific glue layer for AG-AND flash on Renesas FROM_BOARD4");
|
Loading…
Reference in a new issue