arm64: dts: imx8mm-venice-gw72xx-0x: add dt overlay for imx219 rpi v2 camera

Add support for the RaspberryPi Camera v2 which is an IMX219 8MP module:
 - https://datasheets.raspberrypi.com/camera/camera-v2-schematics.pdf
 - has its own on-board 24MHz osc so no clock required from baseboard
 - pin 11 enables 1.8V and 2.8V LDO which is connected to
   GW73xx MIPI_GPIO4 (IMX8MM GPIO1_IO1) so we use this as a gpio

Support is added via a device-tree overlay.

The IMX219 supports RAW8/RAW10 image formats.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Tim Harvey 2022-02-14 15:14:24 -08:00 committed by Shawn Guo
parent 37840653e8
commit 037d4d885a
2 changed files with 95 additions and 0 deletions

View File

@ -99,6 +99,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo
imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
imx8mm-venice-gw72xx-0x-rs422-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs422.dtbo
imx8mm-venice-gw72xx-0x-rs485-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs485.dtbo
@ -107,6 +108,7 @@ imx8mm-venice-gw73xx-0x-rs232-rts-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-ven
imx8mm-venice-gw73xx-0x-rs422-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs422.dtbo
imx8mm-venice-gw73xx-0x-rs485-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-imx219.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs232-rts.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs422.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs485.dtb

View File

@ -0,0 +1,93 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2022 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include "imx8mm-pinfunc.h"
/dts-v1/;
/plugin/;
&{/} {
compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm";
reg_cam: regulator-cam {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_cam>;
compatible = "regulator-fixed";
regulator-name = "reg_cam";
gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
cam24m: cam24m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "cam24m";
};
};
&csi {
status = "okay";
};
&i2c3 {
#address-cells = <1>;
#size-cells = <0>;
imx219: sensor@10 {
compatible = "sony,imx219";
reg = <0x10>;
clocks = <&cam24m>;
VDIG-supply = <&reg_cam>;
port {
/* MIPI CSI-2 bus endpoint */
imx219_to_mipi_csi2: endpoint {
remote-endpoint = <&imx8mm_mipi_csi_in>;
clock-lanes = <0>;
data-lanes = <1 2>;
link-frequencies = /bits/ 64 <456000000>;
};
};
};
};
&mipi_csi {
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
imx8mm_mipi_csi_in: endpoint {
remote-endpoint = <&imx219_to_mipi_csi2>;
data-lanes = <1 2>;
};
};
port@1 {
reg = <1>;
imx8mm_mipi_csi_out: endpoint {
remote-endpoint = <&csi_in>;
};
};
};
};
&iomuxc {
pinctrl_reg_cam: regcamgrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x41
>;
};
};