mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 13:55:32 +00:00
Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"
This reverts commit 263b7fb557
("usb: dwc2: Move reset into
dwc2_get_hwparams()") due to regression found on bcm2835 platform. USB
ethernet fails, due to being unable to pick up proper parameters when
performing a plain reset before reading hw params.
Below shows the results of the gnptxfsiz and hptxfsiz with and before
and after reverting this (from Stefan Wahren):
So here is the probe result before Patch 1 is applied:
[ 1.283148] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host
[ 1.313894] dwc2 20980000.usb: gnptxfsiz=00201000
[ 1.314104] dwc2 20980000.usb: hptxfsiz=00000000
[ 1.353908] dwc2 20980000.usb: 256 invalid for host_nperio_tx_fifo_size. Check HW configuration.
[ 1.354262] dwc2 20980000.usb: 512 invalid for host_perio_tx_fifo_size. Check HW configuration.
[ 1.394249] dwc2 20980000.usb: DWC OTG Controller
[ 1.394561] dwc2 20980000.usb: new USB bus registered, assigned bus number 1
[ 1.394917] dwc2 20980000.usb: irq 33, io mem 0x00000000
And here is the probe result after Patch 1 is applied:
[ 1.280107] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host
[ 1.353949] dwc2 20980000.usb: gnptxfsiz=01001000
[ 1.354166] dwc2 20980000.usb: hptxfsiz=02002000
[ 1.434301] dwc2 20980000.usb: DWC OTG Controller
[ 1.434616] dwc2 20980000.usb: new USB bus registered, assigned bus number 1
[ 1.434973] dwc2 20980000.usb: irq 33, io mem 0x00000000
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Remi Pommarel <repk@triplefau.lt>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This commit is contained in:
parent
79c5623f1c
commit
03b32e4c9b
2 changed files with 7 additions and 9 deletions
|
@ -3278,9 +3278,6 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg)
|
|||
/**
|
||||
* During device initialization, read various hardware configuration
|
||||
* registers and interpret the contents.
|
||||
*
|
||||
* This should be called during driver probe. It will perform a core
|
||||
* soft reset in order to get the reset values of the parameters.
|
||||
*/
|
||||
int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
|
||||
{
|
||||
|
@ -3288,7 +3285,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
|
|||
unsigned width;
|
||||
u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;
|
||||
u32 grxfsiz;
|
||||
int retval;
|
||||
|
||||
/*
|
||||
* Attempt to ensure this device is really a DWC_otg Controller.
|
||||
|
@ -3308,10 +3304,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
|
|||
hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
|
||||
hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
|
||||
|
||||
retval = dwc2_core_reset(hsotg);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1);
|
||||
hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2);
|
||||
hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3);
|
||||
|
|
|
@ -530,7 +530,13 @@ static int dwc2_driver_probe(struct platform_device *dev)
|
|||
if (retval)
|
||||
return retval;
|
||||
|
||||
/* Reset the controller and detect hardware config values */
|
||||
/*
|
||||
* Reset before dwc2_get_hwparams() then it could get power-on real
|
||||
* reset value form registers.
|
||||
*/
|
||||
dwc2_core_reset_and_force_dr_mode(hsotg);
|
||||
|
||||
/* Detect config values from hardware */
|
||||
retval = dwc2_get_hwparams(hsotg);
|
||||
if (retval)
|
||||
goto error;
|
||||
|
|
Loading…
Reference in a new issue