mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-27 12:57:53 +00:00
Code Issues Releases Wiki Activity

New boards the Odroid-M2 and GameForce Ace, CAN on rk3568, RGA2 on rk3588

Browse source 
and some non-critical dts cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmbeFw8QHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgb38B/0fi7YJiYTZNntDtGk8k1lduJinDL5AS0uR
 hZP1VPn4zSbu8UbNawo5GclHJ8EcHQOpuUhwHgsDXoah44NGOVgKfElws8ZUYQQw
 ZaRVxLGM8Q0xjDhmGjVk6FjqoyIzSc4YfqVaKDy6gJZaWssCQR728mGtTSSziww3
 A2qYs2pjnpZk3CyJVubrLI9ZRLkZDRx0+h06KQq48c6klIzeNxui8oOHayvW0ok8
 P7v30BVYfQDuMS3p5VoEQPe/hM07eRLPtp4z0+b93FlQCp7er/t1kJ2JzGiF+DJp
 UMz6+CSPofIs/zRQlOUmBnGUKoCGthYjhPnm9wrTyV3DxuwXIgBd
 =Yyvy
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbhVzQACgkQYKtH/8kJ
 Uie9aQ//VEcwui8kpE4mMKABlZjvWiMa+HDFKxB4rSLlplf6q792FY0mXUmYGyeM
 OtCvie13sujOlxtbJe4YjMf/ACk3UWBFDcc0kdyWU9HqSkp/kZdCzc0JhIzY8Ts9
 SrHWoUoMwnjhGEUZ2a3cabI8feb84+g6SERNZXjckUeADq5JaNIOkGF3thLUU1zG
 P/IZNRcC5RnfQOq0Y39KNnq4DOXzV5n7PSfKwhlEIZnOe98A75GCgDrUfQfx1ELZ
 mV7pY+TMoUO8jsSg9bnkjtSOz1EFBZMsdIX+aRfSK+sLlCIqImoc+64MTYDBTgi6
 KK2tJhCTfD3+L4KQ21/C0M8RzpoQOC9VWbV7zg46ZDid2LhWWrIL6a0BvNqEL4R+
 itTy9fx7XZz3dJLMjhmF6adKcwyJY/WfjFxWSZo/vxU3+ekrd/fPa/V6/9EiSVza
 SKSHHTZVbd1hOyNlbMmh79Zy5FPIbcQk8ZMb3Z/zAEMDIdFRl2v50+ImZkwjz/Nw
 RwHMGgmIDKjqtW0qyxhf+KXwd18+U16j7SsmjKdd4MackYoOaqNa/fQOYuhiS9HN
 MAi0RdApHOCS+2fLdo9NfmgMsSGAyS9sKAjYy8lkWYEIvp30Oddp9T8nLAmwkQ7+
 Mmd/e0CZ85MznnzPFrurIiEVOUftKDp990gJnDG8YG4FrLq7YR4=
 =EGFM
 -----END PGP SIGNATURE-----

Merge tag 'v6.12-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

New boards the Odroid-M2 and GameForce Ace, CAN on rk3568, RGA2 on rk3588
and some non-critical dts cleanups.

* tag 'v6.12-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
  arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
  arm64: dts: rockchip: remove duplicate nodes from dts for ROCK 4SE
  arm64: dts: rockchip: Add GameForce Ace
  dt-bindings: arm: rockchip: Add GameForce Ace
  arm64: dts: rockchip: rk3588s fix sdio pins to pull up
  arm64: dts: rockchip: Add RGA2 support to rk3588
  arm64: dts: rockchip: Add missing tshut props to tsadc on quartz64-b
  arm64: dts: rockchip: Add Hardkernel ODROID-M2
  dt-bindings: arm: rockchip: Add Hardkernel ODROID-M2
  arm64: dts: rockchip: drop hp-pin-name property from audio card on nanopc-t6

Link: https://lore.kernel.org/r/11663608.jrtcCam0TZ@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2024-09-11 08:39:16 +00:00
commit 05b24f63b4
11 changed files with 2223 additions and 21 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
Documentation/devicetree/bindings/arm/rockchip.yaml
View file

@ -271,6 +271,11 @@ properties:
- const: friendlyarm,cm3588
- const: rockchip,rk3588
- description: GameForce Ace
items:
- const: gameforce,ace
- const: rockchip,rk3588s
- description: GameForce Chi
items:
- const: gameforce,chi
@ -605,6 +610,11 @@ properties:
- const: hardkernel,odroid-m1s
- const: rockchip,rk3566
- description: Hardkernel Odroid M2
items:
- const: hardkernel,odroid-m2
- const: rockchip,rk3588s
- description: Hugsun X99 TV Box
items:
- const: hugsun,x99

2
arch/arm64/boot/dts/rockchip/Makefile
View file

@ -146,9 +146,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-gameforce-ace.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb

15
arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts
View file

@ -17,14 +17,6 @@ aliases {
};
};
&pinctrl {
usb2 {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&sdio0 {
status = "okay";
@ -56,10 +48,3 @@ bluetooth {
vddio-supply = <&vcc_1v8>;
};
};
&vcc5v0_host {
enable-active-high;
gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
};

2
arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
View file

@ -648,6 +648,8 @@ flash@0 {
};
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};

14
arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts
View file

@ -89,6 +89,20 @@ vdd_npu: regulator-vdd-npu {
};
};
&can0 {
compatible = "rockchip,rk3568v3-canfd", "rockchip,rk3568v2-canfd";
pinctrl-names = "default";
pinctrl-0 = <&can0m0_pins>;
status = "okay";
};
&can1 {
compatible = "rockchip,rk3568v3-canfd", "rockchip,rk3568v2-canfd";
pinctrl-names = "default";
pinctrl-0 = <&can1m1_pins>;
status = "okay";
};
&combphy0 {
status = "okay";
};

39
arch/arm64/boot/dts/rockchip/rk3568.dtsi
View file

@ -213,6 +213,45 @@ gmac0_mtl_tx_setup: tx-queues-config {
};
};
can0: can@fe570000 {
compatible = "rockchip,rk3568v2-canfd";
reg = <0x0 0xfe570000 0x0 0x1000>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru CLK_CAN0>, <&cru PCLK_CAN0>;
clock-names = "baud", "pclk";
resets = <&cru SRST_CAN0>, <&cru SRST_P_CAN0>;
reset-names = "core", "apb";
pinctrl-names = "default";
pinctrl-0 = <&can0m0_pins>;
status = "disabled";
};
can1: can@fe580000 {
compatible = "rockchip,rk3568v2-canfd";
reg = <0x0 0xfe580000 0x0 0x1000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru CLK_CAN1>, <&cru PCLK_CAN1>;
clock-names = "baud", "pclk";
resets = <&cru SRST_CAN1>, <&cru SRST_P_CAN1>;
reset-names = "core", "apb";
pinctrl-names = "default";
pinctrl-0 = <&can1m0_pins>;
status = "disabled";
};
can2: can@fe590000 {
compatible = "rockchip,rk3568v2-canfd";
reg = <0x0 0xfe590000 0x0 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru CLK_CAN2>, <&cru PCLK_CAN2>;
clock-names = "baud", "pclk";
resets = <&cru SRST_CAN2>, <&cru SRST_P_CAN2>;
reset-names = "core", "apb";
pinctrl-names = "default";
pinctrl-0 = <&can2m0_pins>;
status = "disabled";
};
combphy0: phy@fe820000 {
compatible = "rockchip,rk3568-naneng-combphy";
reg = <0x0 0xfe820000 0x0 0x100>;

10
arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
View file

@ -2449,15 +2449,15 @@ sdiom1_pins: sdiom1-pins {
/* sdio_clk_m1 */
<3 RK_PA5 2 &pcfg_pull_none>,
/* sdio_cmd_m1 */
<3 RK_PA4 2 &pcfg_pull_none>,
<3 RK_PA4 2 &pcfg_pull_up>,
/* sdio_d0_m1 */
<3 RK_PA0 2 &pcfg_pull_none>,
<3 RK_PA0 2 &pcfg_pull_up>,
/* sdio_d1_m1 */
<3 RK_PA1 2 &pcfg_pull_none>,
<3 RK_PA1 2 &pcfg_pull_up>,
/* sdio_d2_m1 */
<3 RK_PA2 2 &pcfg_pull_none>,
<3 RK_PA2 2 &pcfg_pull_up>,
/* sdio_d3_m1 */
<3 RK_PA3 2 &pcfg_pull_none>;
<3 RK_PA3 2 &pcfg_pull_up>;
};
};

11
arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
View file

@ -1143,6 +1143,17 @@ vpu121_mmu: iommu@fdb50800 {
#iommu-cells = <0>;
};
rga: rga@fdb80000 {
compatible = "rockchip,rk3588-rga", "rockchip,rk3288-rga";
reg = <0x0 0xfdb80000 0x0 0x180>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru ACLK_RGA2>, <&cru HCLK_RGA2>, <&cru CLK_RGA2_CORE>;
clock-names = "aclk", "hclk", "sclk";
resets = <&cru SRST_RGA2_CORE>, <&cru SRST_A_RGA2>, <&cru SRST_H_RGA2>;
reset-names = "core", "axi", "ahb";
power-domains = <&power RK3588_PD_VDPU>;
};
vepu121_0: video-codec@fdba0000 {
compatible = "rockchip,rk3588-vepu121";
reg = <0x0 0xfdba0000 0x0 0x800>;

1
arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
View file

@ -76,7 +76,6 @@ sound {
simple-audio-card,mclk-fs = <256>;
simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
simple-audio-card,hp-pin-name = "Headphones";
simple-audio-card,widgets =
"Headphone", "Headphones",

1237
arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts Normal file
View file

File diff suppressed because it is too large Load diff

903
arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts Normal file
View file

@ -0,0 +1,903 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/usb/pd.h>
#include "rk3588s.dtsi"
/ {
model = "Hardkernel ODROID-M2";
compatible = "hardkernel,odroid-m2", "rockchip,rk3588s";
aliases {
ethernet0 = &gmac1;
mmc0 = &sdhci;
mmc1 = &sdmmc;
};
chosen {
stdout-path = "serial2:1500000n8";
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pwr_led>, <&sys_led>;
led_pwr: led-0 {
color = <LED_COLOR_ID_RED>;
default-state = "on";
function = LED_FUNCTION_POWER;
gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
led_sys: led-1 {
color = <LED_COLOR_ID_BLUE>;
default-state = "on";
function = LED_FUNCTION_HEARTBEAT;
gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
fan: pwm-fan {
compatible = "pwm-fan";
#cooling-cells = <2>;
cooling-levels = <0 192 224 255>;
fan-supply = <&vcc5v0_sys>;
pwms = <&pwm0 0 22222 0>;
};
vcc_1v1_nldo_s3: regulator-1v1-vcc-nldo-s3 {
compatible = "regulator-fixed";
regulator-name = "vcc_1v1_nldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
vin-supply = <&vcc4v0_sys>;
};
vcc3v3_lcd: regulator-3v3-vcc-lcd {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_pwren>;
regulator-name = "vcc3v3_lcd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3_s3>;
};
vcc3v3_pcie: regulator-3v3-vcc-pcie {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_pwren>;
regulator-name = "vcc3v3_pcie";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3_s3>;
};
vcc_3v3_s0: regulator-3v3-vcc-s0 {
compatible = "regulator-fixed";
regulator-name = "vcc_3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3_s3>;
};
vcc4v0_sys: regulator-4v0-vcc-sys {
compatible = "regulator-fixed";
regulator-name = "vcc4v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <4800000>;
regulator-max-microvolt = <4800000>;
vin-supply = <&vcc12v_dcin>;
};
vcc5v0_sys: regulator-5v0-vcc-sys {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_pwren>;
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
vcc5v0_usb2_host: regulator-5v0-vcc-usb2-host {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb2_host_pwren>;
regulator-name = "vcc5v0_usb2_host";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_usb3_host: regulator-5v0-vcc-usb3-host {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3_host_pwren>;
regulator-name = "vcc5v0_usb3_host";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_usb3_typec: regulator-5v0-vcc-usb3-typec {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3_typec_pwren>;
regulator-name = "vcc5v0_usb3_typec";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
vcca: regulator-5v0-vcca {
compatible = "regulator-fixed";
regulator-name = "vcca";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
vcc12v_dcin: regulator-12v0-vcc-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
};
&combphy0_ps {
status = "okay";
};
&combphy2_psu {
status = "okay";
};
&cpu_b0 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b1 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b2 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_b3 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_l0 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l1 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l2 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&gmac1 {
clock_in_out = "output";
phy-handle = <&rgmii_phy1>;
phy-mode = "rgmii-id";
phy-supply = <&vcc_3v3_s0>;
pinctrl-names = "default";
pinctrl-0 = <&gmac1_miim
&gmac1_tx_bus2
&gmac1_rx_bus2
&gmac1_rgmii_clk
&gmac1_rgmii_bus
&gmac1_clkinout>;
status = "okay";
};
&gpu {
mali-supply = <&vdd_gpu_s0>;
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0m2_xfer>;
status = "okay";
vdd_cpu_big0_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big0_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc4v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_big1_s0: regulator@43 {
compatible = "rockchip,rk8603", "rockchip,rk8602";
reg = <0x43>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big1_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc4v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c2 {
status = "okay";
vdd_npu_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_npu_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc4v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c8 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c8m2_xfer>;
status = "okay";
usbc0: usb-typec@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
interrupt-parent = <&gpio4>;
interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&usbc0_int>;
vbus-supply = <&vcc5v0_usb3_typec>;
connector {
compatible = "usb-c-connector";
data-role = "dual";
label = "USB-C";
op-sink-microwatt = <1000000>;
power-role = "dual";
sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
try-power-role = "source";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
usbc0_role_switch: endpoint {
remote-endpoint = <&usb_host0_xhci_role_switch>;
};
};
port@1 {
reg = <1>;
usbc0_orientation_switch: endpoint {
remote-endpoint = <&usbdp_phy0_orientation_switch>;
};
};
port@2 {
reg = <2>;
usbc0_dp_altmode_mux: endpoint {
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
};
};
};
};
};
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pcf8563_int>;
wakeup-source;
};
};
&mdio1 {
rgmii_phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id001c.c916";
reg = <1>;
reset-assert-us = <20000>;
reset-deassert-us = <100000>;
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
};
};
&package_thermal {
polling-delay = <1000>;
trips {
package_fan0: package-fan0 {
hysteresis = <2000>;
temperature = <60000>;
type = "active";
};
};
cooling-maps {
map0 {
cooling-device = <&fan 1 THERMAL_NO_LIMIT>;
trip = <&package_fan0>;
};
};
};
&pcie2x1l2 {
pinctrl-names = "default";
pinctrl-0 = <&pcie20x1_pins>;
reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
&pinctrl {
lcd {
lcd_pwren: lcd-pwren {
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
pwr_led: pwr-led {
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
sys_led: sys-led {
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie {
pcie20x1_pins: pcie20x1-pins {
rockchip,pins =
<1 RK_PA0 4 &pcfg_pull_none>,
<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PA1 4 &pcfg_pull_none>;
};
pcie_pwren: pcie-pwren {
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
regulator {
vcc5v0_pwren: vcc5v0-pwren {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
rtc {
pcf8563_int: pcf8563-int {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
usb2_host_pwren: usb2-host-pwren {
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
usb3_host_pwren: usb3-host-pwren {
rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
usb3_typec_pwren: usb3-typec-pwren {
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
usbc0_int: usbc0-int {
rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pwm0m2_pins>;
status = "okay";
};
&saradc {
vref-supply = <&vcca_1v8_s0>;
status = "okay";
};
&sdhci {
bus-width = <8>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
no-sd;
no-sdio;
non-removable;
vmmc-supply = <&vcc_3v3_s0>;
vqmmc-supply = <&vcc_1v8_s0>;
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
no-mmc;
no-sdio;
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3_s3>;
vqmmc-supply = <&vccio_sd_s0>;
status = "okay";
};
&spi2 {
assigned-clocks = <&cru CLK_SPI2>;
assigned-clock-rates = <200000000>;
num-cs = <1>;
pinctrl-names = "default";
pinctrl-0 = <&spi2m2_cs0>, <&spi2m2_pins>;
status = "okay";
pmic@0 {
compatible = "rockchip,rk806";
reg = <0x0>;
#gpio-cells = <2>;
gpio-controller;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
spi-max-frequency = <1000000>;
system-power-controller;
vcc1-supply = <&vcc4v0_sys>;
vcc2-supply = <&vcc4v0_sys>;
vcc3-supply = <&vcc4v0_sys>;
vcc4-supply = <&vcc4v0_sys>;
vcc5-supply = <&vcc4v0_sys>;
vcc6-supply = <&vcc4v0_sys>;
vcc7-supply = <&vcc4v0_sys>;
vcc8-supply = <&vcc4v0_sys>;
vcc9-supply = <&vcc4v0_sys>;
vcc10-supply = <&vcc4v0_sys>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
vcc12-supply = <&vcc4v0_sys>;
vcc13-supply = <&vcc_1v1_nldo_s3>;
vcc14-supply = <&vcc_1v1_nldo_s3>;
vcca-supply = <&vcca>;
rk806_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl1";
function = "pin_fun0";
};
rk806_dvs2_null: dvs2-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs3_null: dvs3-null-pins {
pins = "gpio_pwrctrl3";
function = "pin_fun0";
};
regulators {
vdd_gpu_s0: dcdc-reg1 {
regulator-name = "vdd_gpu_s0";
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <400>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_lit_s0: dcdc-reg2 {
regulator-name = "vdd_cpu_lit_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_logic_s0: dcdc-reg3 {
regulator-name = "vdd_logic_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <750000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_vdenc_s0: dcdc-reg4 {
regulator-name = "vdd_vdenc_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_ddr_s0: dcdc-reg5 {
regulator-name = "vdd_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <900000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
vdd2_ddr_s3: dcdc-reg6 {
regulator-name = "vdd2_ddr_s3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_2v0_pldo_s3: dcdc-reg7 {
regulator-name = "vdd_2v0_pldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <2000000>;
};
};
vcc_3v3_s3: dcdc-reg8 {
regulator-name = "vcc_3v3_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vddq_ddr_s0: dcdc-reg9 {
regulator-name = "vddq_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s3: dcdc-reg10 {
regulator-name = "vcc_1v8_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc_1v8_s0: pldo-reg1 {
regulator-name = "vcc_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca_1v8_s0: pldo-reg2 {
regulator-name = "vcca_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdda_1v2_s0: pldo-reg3 {
regulator-name = "vdda_1v2_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca_3v3_s0: pldo-reg4 {
regulator-name = "vcca_3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd_s0: pldo-reg5 {
regulator-name = "vccio_sd_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s3_pldo6: pldo-reg6 {
regulator-name = "vcc_1v8_s3_pldo6";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_0v75_s3: nldo-reg1 {
regulator-name = "vdd_0v75_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdda_ddr_pll_s0: nldo-reg2 {
regulator-name = "vdda_ddr_pll_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
vdda_0v75_s0: nldo-reg3 {
regulator-name = "vdda_0v75_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <837500>;
regulator-max-microvolt = <837500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda_0v85_s0: nldo-reg4 {
regulator-name = "vdda_0v85_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
/* Schematics show not in use */
nldo-reg5 {
};
};
};
};
&tsadc {
status = "okay";
};
&u2phy0 {
status = "okay";
};
&u2phy0_otg {
status = "okay";
};
&u2phy2 {
status = "okay";
};
&u2phy2_host {
phy-supply = <&vcc5v0_usb2_host>;
status = "okay";
};
&u2phy3 {
status = "okay";
};
&u2phy3_host {
phy-supply = <&vcc5v0_usb3_host>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host0_xhci {
usb-role-switch;
status = "okay";
port {
usb_host0_xhci_role_switch: endpoint {
remote-endpoint = <&usbc0_role_switch>;
};
};
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usb_host2_xhci {
status = "okay";
};
&usbdp_phy0 {
mode-switch;
orientation-switch;
sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
status = "okay";
port {
#address-cells = <1>;
#size-cells = <0>;
usbdp_phy0_orientation_switch: endpoint@0 {
reg = <0>;
remote-endpoint = <&usbc0_orientation_switch>;
};
usbdp_phy0_dp_altmode_mux: endpoint@1 {
reg = <1>;
remote-endpoint = <&usbc0_dp_altmode_mux>;
};
};
};