Blackfin arch: use "char bfin_board_name[]" rather than "char *bfin_board_name" per discussion on lkml as the former uses less storage

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
This commit is contained in:
Mike Frysinger 2007-10-21 22:36:06 +08:00 committed by Bryan Wu
parent c1e7399da7
commit 066954a389
16 changed files with 25 additions and 25 deletions

View file

@ -498,7 +498,7 @@ EXPORT_SYMBOL(get_sclk);
*/
static int show_cpuinfo(struct seq_file *m, void *v)
{
char *cpu, *mmu, *fpu, *name, vendor[20], cache[30];
char *cpu, *mmu, *fpu, *vendor, *cache;
uint32_t revid;
u_long cclk = 0, sclk = 0;
@ -508,17 +508,17 @@ static int show_cpuinfo(struct seq_file *m, void *v)
mmu = "none";
fpu = "none";
revid = bfin_revid();
name = bfin_board_name;
cclk = get_cclk();
sclk = get_sclk();
switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) {
case(0xca):
strcpy(vendor, "AnalogDevices");
case 0xca:
vendor = "Analog Devices";
break;
default:
strcpy(vendor, "unknown");
vendor = "unknown";
break;
}
seq_printf(m, "processor\t: %d\n"
@ -544,22 +544,22 @@ static int show_cpuinfo(struct seq_file *m, void *v)
/* Check Cache configutation */
switch (bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) {
case ACACHE_BSRAM:
strcpy(cache, "dbank-A/B\t: cache/sram");
cache = "dbank-A/B\t: cache/sram";
dcache_size = 16;
dsup_banks = 1;
break;
case ACACHE_BCACHE:
strcpy(cache, "dbank-A/B\t: cache/cache");
cache = "dbank-A/B\t: cache/cache";
dcache_size = 32;
dsup_banks = 2;
break;
case ASRAM_BSRAM:
strcpy(cache, "dbank-A/B\t: sram/sram");
cache = "dbank-A/B\t: sram/sram";
dcache_size = 0;
dsup_banks = 0;
break;
default:
strcpy(cache, "unknown");
cache = "unknown";
dcache_size = 0;
dsup_banks = 0;
break;
@ -639,7 +639,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
}
#endif
seq_printf(m, "board name\t: %s\n", name);
seq_printf(m, "board name\t: %s\n", bfin_board_name);
seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
physical_mem_end >> 10, (void *)0, (void *)physical_mem_end);
seq_printf(m, "kernel memory\t: %d kB (0x%p -> 0x%p)\n",

View file

@ -49,7 +49,7 @@
/*
* Name the Board for the /proc/cpuinfo
*/
char *bfin_board_name = "ADDS-BF527-EZKIT";
const char bfin_board_name[] = "ADDS-BF527-EZKIT";
/*
* Driver needs to know address, irq and flag pin.

View file

@ -42,7 +42,7 @@
/*
* Name the Board for the /proc/cpuinfo
*/
char *bfin_board_name = "Bluetechnix CM BF533";
const char bfin_board_name[] = "Bluetechnix CM BF533";
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */

View file

@ -43,7 +43,7 @@
/*
* Name the Board for the /proc/cpuinfo
*/
char *bfin_board_name = "ADDS-BF533-EZKIT";
const char bfin_board_name[] = "ADDS-BF533-EZKIT";
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {

View file

@ -35,7 +35,7 @@
/*
* Name the Board for the /proc/cpuinfo
*/
char *bfin_board_name = "UNKNOWN BOARD";
const char bfin_board_name[] = "UNKNOWN BOARD";
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {

View file

@ -46,7 +46,7 @@
/*
* Name the Board for the /proc/cpuinfo
*/
char *bfin_board_name = "ADDS-BF533-STAMP";
const char bfin_board_name[] = "ADDS-BF533-STAMP";
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {

View file

@ -43,7 +43,7 @@
/*
* Name the Board for the /proc/cpuinfo
*/
char *bfin_board_name = "Bluetechnix CM BF537";
const char bfin_board_name[] = "Bluetechnix CM BF537";
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */

View file

@ -49,7 +49,7 @@
/*
* Name the Board for the /proc/cpuinfo
*/
char *bfin_board_name = "GENERIC Board";
const char bfin_board_name[] = "GENERIC Board";
/*
* Driver needs to know address, irq and flag pin.

View file

@ -47,7 +47,7 @@
/*
* Name the Board for the /proc/cpuinfo
*/
char *bfin_board_name = "PNAV-1.0";
const char bfin_board_name[] = "PNAV-1.0";
/*
* Driver needs to know address, irq and flag pin.

View file

@ -49,7 +49,7 @@
/*
* Name the Board for the /proc/cpuinfo
*/
char *bfin_board_name = "ADDS-BF537-STAMP";
const char bfin_board_name[] = "ADDS-BF537-STAMP";
/*
* Driver needs to know address, irq and flag pin.

View file

@ -49,7 +49,7 @@
/*
* Name the Board for the /proc/cpuinfo
*/
char *bfin_board_name = "ADSP-BF548-EZKIT";
const char bfin_board_name[] = "ADSP-BF548-EZKIT";
/*
* Driver needs to know address, irq and flag pin.

View file

@ -42,7 +42,7 @@
/*
* Name the Board for the /proc/cpuinfo
*/
char *bfin_board_name = "Bluetechnix CM BF561";
const char bfin_board_name[] = "Bluetechnix CM BF561";
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */

View file

@ -39,7 +39,7 @@
/*
* Name the Board for the /proc/cpuinfo
*/
char *bfin_board_name = "ADDS-BF561-EZKIT";
const char bfin_board_name[] = "ADDS-BF561-EZKIT";
#define ISP1761_BASE 0x2C0F0000
#define ISP1761_IRQ IRQ_PF10

View file

@ -32,7 +32,7 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
char *bfin_board_name = "UNKNOWN BOARD";
const char bfin_board_name[] = "UNKNOWN BOARD";
/*
* Driver needs to know address, irq and flag pin.

View file

@ -16,7 +16,7 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
char *bfin_board_name = "Tepla-BF561";
const char bfin_board_name[] = "Tepla-BF561";
/*
* Driver needs to know address, irq and flag pin.

View file

@ -105,7 +105,7 @@ extern void led_disp_num(int);
extern void led_toggle_num(int);
extern void init_leds(void);
extern char *bfin_board_name __attribute__ ((weak));
extern const char bfin_board_name[];
extern unsigned long wall_jiffies;
extern unsigned long ipdt_table[];
extern unsigned long dpdt_table[];