mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-05 18:39:59 +00:00
ARM: ixp4xx: Delete NSLU2 boardfiles
The NSLU2 is now completely migrated to use device tree exclusively so delete the boardfiles. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
parent
e73f0f0ee7
commit
06ce83a4dd
4 changed files with 0 additions and 421 deletions
|
@ -17,15 +17,6 @@ config MACH_IXP4XX_OF
|
|||
help
|
||||
Say 'Y' here to support Device Tree-based IXP4xx platforms.
|
||||
|
||||
config MACH_NSLU2
|
||||
bool
|
||||
prompt "Linksys NSLU2"
|
||||
depends on IXP4XX_PCI_LEGACY
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support Linksys's
|
||||
NSLU2 NAS device. For more information on this platform,
|
||||
see http://www.nslu2-linux.org
|
||||
|
||||
config MACH_AVILA
|
||||
bool "Avila"
|
||||
depends on IXP4XX_PCI_LEGACY
|
||||
|
|
|
@ -15,7 +15,6 @@ obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
|
|||
obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
|
||||
obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
|
||||
obj-pci-$(CONFIG_MACH_MICCPT) += miccpt-pci.o
|
||||
obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
|
||||
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
|
||||
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
|
||||
obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
|
||||
|
@ -33,7 +32,6 @@ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
|
|||
obj-$(CONFIG_MACH_DEVIXP) += omixp-setup.o
|
||||
obj-$(CONFIG_MACH_MICCPT) += omixp-setup.o
|
||||
obj-$(CONFIG_MACH_MIC256) += omixp-setup.o
|
||||
obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o
|
||||
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
|
||||
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
|
||||
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
|
||||
|
|
|
@ -1,69 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* arch/arm/mach-ixp4xx/nslu2-pci.c
|
||||
*
|
||||
* NSLU2 board-level PCI initialization
|
||||
*
|
||||
* based on ixdp425-pci.c:
|
||||
* Copyright (C) 2002 Intel Corporation.
|
||||
* Copyright (C) 2003-2004 MontaVista Software, Inc.
|
||||
*
|
||||
* Maintainer: http://www.nslu2-linux.org/
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/irq.h>
|
||||
#include <asm/mach/pci.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include "irqs.h"
|
||||
|
||||
#define MAX_DEV 3
|
||||
#define IRQ_LINES 3
|
||||
|
||||
/* PCI controller GPIO to IRQ pin mappings */
|
||||
#define INTA 11
|
||||
#define INTB 10
|
||||
#define INTC 9
|
||||
#define INTD 8
|
||||
|
||||
void __init nslu2_pci_preinit(void)
|
||||
{
|
||||
irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
|
||||
ixp4xx_pci_preinit();
|
||||
}
|
||||
|
||||
static int __init nslu2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
||||
{
|
||||
static int pci_irq_table[IRQ_LINES] = {
|
||||
IXP4XX_GPIO_IRQ(INTA),
|
||||
IXP4XX_GPIO_IRQ(INTB),
|
||||
IXP4XX_GPIO_IRQ(INTC),
|
||||
};
|
||||
|
||||
if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
|
||||
return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
|
||||
|
||||
return -1;
|
||||
}
|
||||
|
||||
struct hw_pci __initdata nslu2_pci = {
|
||||
.nr_controllers = 1,
|
||||
.ops = &ixp4xx_ops,
|
||||
.preinit = nslu2_pci_preinit,
|
||||
.setup = ixp4xx_setup,
|
||||
.map_irq = nslu2_map_irq,
|
||||
};
|
||||
|
||||
int __init nslu2_pci_init(void) /* monkey see, monkey do */
|
||||
{
|
||||
if (machine_is_nslu2())
|
||||
pci_common_init(&nslu2_pci);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
subsys_initcall(nslu2_pci_init);
|
|
@ -1,341 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* arch/arm/mach-ixp4xx/nslu2-setup.c
|
||||
*
|
||||
* NSLU2 board-setup
|
||||
*
|
||||
* Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
|
||||
*
|
||||
* based on ixdp425-setup.c:
|
||||
* Copyright (C) 2003-2004 MontaVista Software, Inc.
|
||||
* based on nslu2-power.c:
|
||||
* Copyright (C) 2005 Tower Technologies
|
||||
*
|
||||
* Author: Mark Rakes <mrakes at mac.com>
|
||||
* Author: Rod Whitby <rod@whitby.id.au>
|
||||
* Author: Alessandro Zummo <a.zummo@towertech.it>
|
||||
* Maintainers: http://www.nslu2-linux.org/
|
||||
*
|
||||
*/
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/if_ether.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/reboot.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
#include <linux/io.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/flash.h>
|
||||
#include <asm/mach/time.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
#include "irqs.h"
|
||||
|
||||
#define NSLU2_SDA_PIN 7
|
||||
#define NSLU2_SCL_PIN 6
|
||||
|
||||
/* NSLU2 Timer */
|
||||
#define NSLU2_FREQ 66000000
|
||||
|
||||
/* Buttons */
|
||||
#define NSLU2_PB_GPIO 5 /* power button */
|
||||
#define NSLU2_PO_GPIO 8 /* power off */
|
||||
#define NSLU2_RB_GPIO 12 /* reset button */
|
||||
|
||||
/* Buzzer */
|
||||
#define NSLU2_GPIO_BUZZ 4
|
||||
|
||||
/* LEDs */
|
||||
#define NSLU2_LED_RED_GPIO 0
|
||||
#define NSLU2_LED_GRN_GPIO 1
|
||||
#define NSLU2_LED_DISK1_GPIO 3
|
||||
#define NSLU2_LED_DISK2_GPIO 2
|
||||
|
||||
static struct flash_platform_data nslu2_flash_data = {
|
||||
.map_name = "cfi_probe",
|
||||
.width = 2,
|
||||
};
|
||||
|
||||
static struct resource nslu2_flash_resource = {
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device nslu2_flash = {
|
||||
.name = "IXP4XX-Flash",
|
||||
.id = 0,
|
||||
.dev.platform_data = &nslu2_flash_data,
|
||||
.num_resources = 1,
|
||||
.resource = &nslu2_flash_resource,
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table nslu2_i2c_gpiod_table = {
|
||||
.dev_id = "i2c-gpio.0",
|
||||
.table = {
|
||||
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SDA_PIN,
|
||||
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
|
||||
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SCL_PIN,
|
||||
NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
|
||||
},
|
||||
};
|
||||
|
||||
static struct i2c_board_info __initdata nslu2_i2c_board_info [] = {
|
||||
{
|
||||
I2C_BOARD_INFO("x1205", 0x6f),
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led nslu2_led_pins[] = {
|
||||
{
|
||||
.name = "nslu2:green:ready",
|
||||
.gpio = NSLU2_LED_GRN_GPIO,
|
||||
},
|
||||
{
|
||||
.name = "nslu2:red:status",
|
||||
.gpio = NSLU2_LED_RED_GPIO,
|
||||
},
|
||||
{
|
||||
.name = "nslu2:green:disk-1",
|
||||
.gpio = NSLU2_LED_DISK1_GPIO,
|
||||
.active_low = true,
|
||||
},
|
||||
{
|
||||
.name = "nslu2:green:disk-2",
|
||||
.gpio = NSLU2_LED_DISK2_GPIO,
|
||||
.active_low = true,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led_platform_data nslu2_led_data = {
|
||||
.num_leds = ARRAY_SIZE(nslu2_led_pins),
|
||||
.leds = nslu2_led_pins,
|
||||
};
|
||||
|
||||
static struct platform_device nslu2_leds = {
|
||||
.name = "leds-gpio",
|
||||
.id = -1,
|
||||
.dev.platform_data = &nslu2_led_data,
|
||||
};
|
||||
|
||||
static struct platform_device nslu2_i2c_gpio = {
|
||||
.name = "i2c-gpio",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = NULL,
|
||||
},
|
||||
};
|
||||
|
||||
static struct resource nslu2_beeper_resources[] = {
|
||||
{
|
||||
.start = IRQ_IXP4XX_TIMER2,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device nslu2_beeper = {
|
||||
.name = "ixp4xx-beeper",
|
||||
.id = NSLU2_GPIO_BUZZ,
|
||||
.resource = nslu2_beeper_resources,
|
||||
.num_resources = ARRAY_SIZE(nslu2_beeper_resources),
|
||||
};
|
||||
|
||||
static struct resource nslu2_uart_resources[] = {
|
||||
{
|
||||
.start = IXP4XX_UART1_BASE_PHYS,
|
||||
.end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
{
|
||||
.start = IXP4XX_UART2_BASE_PHYS,
|
||||
.end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}
|
||||
};
|
||||
|
||||
static struct plat_serial8250_port nslu2_uart_data[] = {
|
||||
{
|
||||
.mapbase = IXP4XX_UART1_BASE_PHYS,
|
||||
.membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
|
||||
.irq = IRQ_IXP4XX_UART1,
|
||||
.flags = UPF_BOOT_AUTOCONF,
|
||||
.iotype = UPIO_MEM,
|
||||
.regshift = 2,
|
||||
.uartclk = IXP4XX_UART_XTAL,
|
||||
},
|
||||
{
|
||||
.mapbase = IXP4XX_UART2_BASE_PHYS,
|
||||
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
||||
.irq = IRQ_IXP4XX_UART2,
|
||||
.flags = UPF_BOOT_AUTOCONF,
|
||||
.iotype = UPIO_MEM,
|
||||
.regshift = 2,
|
||||
.uartclk = IXP4XX_UART_XTAL,
|
||||
},
|
||||
{ }
|
||||
};
|
||||
|
||||
static struct platform_device nslu2_uart = {
|
||||
.name = "serial8250",
|
||||
.id = PLAT8250_DEV_PLATFORM,
|
||||
.dev.platform_data = nslu2_uart_data,
|
||||
.num_resources = 2,
|
||||
.resource = nslu2_uart_resources,
|
||||
};
|
||||
|
||||
/* Built-in 10/100 Ethernet MAC interfaces */
|
||||
static struct resource nslu2_eth_resources[] = {
|
||||
{
|
||||
.start = IXP4XX_EthB_BASE_PHYS,
|
||||
.end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct eth_plat_info nslu2_plat_eth[] = {
|
||||
{
|
||||
.phy = 1,
|
||||
.rxq = 3,
|
||||
.txreadyq = 20,
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device nslu2_eth[] = {
|
||||
{
|
||||
.name = "ixp4xx_eth",
|
||||
.id = IXP4XX_ETH_NPEB,
|
||||
.dev.platform_data = nslu2_plat_eth,
|
||||
.num_resources = ARRAY_SIZE(nslu2_eth_resources),
|
||||
.resource = nslu2_eth_resources,
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device *nslu2_devices[] __initdata = {
|
||||
&nslu2_i2c_gpio,
|
||||
&nslu2_flash,
|
||||
&nslu2_beeper,
|
||||
&nslu2_leds,
|
||||
&nslu2_eth[0],
|
||||
};
|
||||
|
||||
static void nslu2_power_off(void)
|
||||
{
|
||||
/* This causes the box to drop the power and go dead. */
|
||||
|
||||
/* enable the pwr cntl gpio and assert power off */
|
||||
gpio_direction_output(NSLU2_PO_GPIO, 1);
|
||||
}
|
||||
|
||||
static irqreturn_t nslu2_power_handler(int irq, void *dev_id)
|
||||
{
|
||||
/* Signal init to do the ctrlaltdel action, this will bypass init if
|
||||
* it hasn't started and do a kernel_restart.
|
||||
*/
|
||||
ctrl_alt_del();
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static irqreturn_t nslu2_reset_handler(int irq, void *dev_id)
|
||||
{
|
||||
/* This is the paper-clip reset, it shuts the machine down directly.
|
||||
*/
|
||||
machine_power_off();
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int __init nslu2_gpio_init(void)
|
||||
{
|
||||
if (!machine_is_nslu2())
|
||||
return 0;
|
||||
|
||||
/* Request the power off GPIO */
|
||||
return gpio_request(NSLU2_PO_GPIO, "power off");
|
||||
}
|
||||
device_initcall(nslu2_gpio_init);
|
||||
|
||||
static void __init nslu2_timer_init(void)
|
||||
{
|
||||
/* The xtal on this machine is non-standard. */
|
||||
ixp4xx_timer_freq = NSLU2_FREQ;
|
||||
|
||||
/* Call standard timer_init function. */
|
||||
ixp4xx_timer_init();
|
||||
}
|
||||
|
||||
static void __init nslu2_init(void)
|
||||
{
|
||||
uint8_t __iomem *f;
|
||||
int i;
|
||||
|
||||
ixp4xx_sys_init();
|
||||
|
||||
nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
||||
nslu2_flash_resource.end =
|
||||
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
|
||||
|
||||
gpiod_add_lookup_table(&nslu2_i2c_gpiod_table);
|
||||
i2c_register_board_info(0, nslu2_i2c_board_info,
|
||||
ARRAY_SIZE(nslu2_i2c_board_info));
|
||||
|
||||
/*
|
||||
* This is only useful on a modified machine, but it is valuable
|
||||
* to have it first in order to see debug messages, and so that
|
||||
* it does *not* get removed if platform_add_devices fails!
|
||||
*/
|
||||
(void)platform_device_register(&nslu2_uart);
|
||||
|
||||
platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
|
||||
|
||||
pm_power_off = nslu2_power_off;
|
||||
|
||||
if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler,
|
||||
IRQF_TRIGGER_LOW, "NSLU2 reset button", NULL) < 0) {
|
||||
|
||||
printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
|
||||
gpio_to_irq(NSLU2_RB_GPIO));
|
||||
}
|
||||
|
||||
if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler,
|
||||
IRQF_TRIGGER_HIGH, "NSLU2 power button", NULL) < 0) {
|
||||
|
||||
printk(KERN_DEBUG "Power Button IRQ %d not available\n",
|
||||
gpio_to_irq(NSLU2_PB_GPIO));
|
||||
}
|
||||
|
||||
/*
|
||||
* Map in a portion of the flash and read the MAC address.
|
||||
* Since it is stored in BE in the flash itself, we need to
|
||||
* byteswap it if we're in LE mode.
|
||||
*/
|
||||
f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000);
|
||||
if (f) {
|
||||
for (i = 0; i < 6; i++)
|
||||
#ifdef __ARMEB__
|
||||
nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
|
||||
#else
|
||||
nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + (i^3));
|
||||
#endif
|
||||
iounmap(f);
|
||||
}
|
||||
printk(KERN_INFO "NSLU2: Using MAC address %pM for port 0\n",
|
||||
nslu2_plat_eth[0].hwaddr);
|
||||
|
||||
}
|
||||
|
||||
MACHINE_START(NSLU2, "Linksys NSLU2")
|
||||
/* Maintainer: www.nslu2-linux.org */
|
||||
.atag_offset = 0x100,
|
||||
.map_io = ixp4xx_map_io,
|
||||
.init_early = ixp4xx_init_early,
|
||||
.init_irq = ixp4xx_init_irq,
|
||||
.init_time = nslu2_timer_init,
|
||||
.init_machine = nslu2_init,
|
||||
#if defined(CONFIG_PCI)
|
||||
.dma_zone_size = SZ_64M,
|
||||
#endif
|
||||
.restart = ixp4xx_restart,
|
||||
MACHINE_END
|
Loading…
Reference in a new issue