iio: Add new driver dht11

This driver handles DHT11 and DHT22 sensors.

Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
Harald Geyer 2013-12-01 15:04:00 +00:00 committed by Jonathan Cameron
parent ac216aa290
commit 091a121b04
6 changed files with 330 additions and 0 deletions

View file

@ -0,0 +1,14 @@
* DHT11 humidity/temperature sensor (and compatibles like DHT22)
Required properties:
- compatible: Should be "dht11"
- gpios: Should specify the GPIO connected to the sensor's data
line, see "gpios property" in
Documentation/devicetree/bindings/gpio/gpio.txt.
Example:
humidity_sensor {
compatible = "dht11";
gpios = <&gpio0 6 0>;
}

View file

@ -65,6 +65,7 @@ source "drivers/iio/common/Kconfig"
source "drivers/iio/dac/Kconfig"
source "drivers/iio/frequency/Kconfig"
source "drivers/iio/gyro/Kconfig"
source "drivers/iio/humidity/Kconfig"
source "drivers/iio/imu/Kconfig"
source "drivers/iio/light/Kconfig"
source "drivers/iio/magnetometer/Kconfig"

View file

@ -18,6 +18,7 @@ obj-y += common/
obj-y += dac/
obj-y += gyro/
obj-y += frequency/
obj-y += humidity/
obj-y += imu/
obj-y += light/
obj-y += magnetometer/

View file

@ -0,0 +1,15 @@
#
# humidity sensor drivers
#
menu "Humidity sensors"
config DHT11
tristate "DHT11 (and compatible sensors) driver"
depends on GPIOLIB
help
This driver supports reading data via a single interrupt
generating GPIO line. Currently tested are DHT11 and DHT22.
Other sensors should work as well as long as they speak the
same protocol.
endmenu

View file

@ -0,0 +1,5 @@
#
# Makefile for IIO humidity sensor drivers
#
obj-$(CONFIG_DHT11) += dht11.o

View file

@ -0,0 +1,294 @@
/*
* DHT11/DHT22 bit banging GPIO driver
*
* Copyright (c) Harald Geyer <harald@ccbib.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/printk.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/sysfs.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/wait.h>
#include <linux/bitops.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/iio/iio.h>
#define DRIVER_NAME "dht11"
#define DHT11_DATA_VALID_TIME 2000000000 /* 2s in ns */
#define DHT11_EDGES_PREAMBLE 4
#define DHT11_BITS_PER_READ 40
#define DHT11_EDGES_PER_READ (2*DHT11_BITS_PER_READ + DHT11_EDGES_PREAMBLE + 1)
/* Data transmission timing (nano seconds) */
#define DHT11_START_TRANSMISSION 18 /* ms */
#define DHT11_SENSOR_RESPONSE 80000
#define DHT11_START_BIT 50000
#define DHT11_DATA_BIT_LOW 27000
#define DHT11_DATA_BIT_HIGH 70000
struct dht11 {
struct device *dev;
int gpio;
int irq;
struct completion completion;
s64 timestamp;
int temperature;
int humidity;
/* num_edges: -1 means "no transmission in progress" */
int num_edges;
struct {s64 ts; int value; } edges[DHT11_EDGES_PER_READ];
};
static unsigned char dht11_decode_byte(int *timing, int threshold)
{
unsigned char ret = 0;
int i;
for (i = 0; i < 8; ++i) {
ret <<= 1;
if (timing[i] >= threshold)
++ret;
}
return ret;
}
static int dht11_decode(struct dht11 *dht11, int offset)
{
int i, t, timing[DHT11_BITS_PER_READ], threshold,
timeres = DHT11_SENSOR_RESPONSE;
unsigned char temp_int, temp_dec, hum_int, hum_dec, checksum;
/* Calculate timestamp resolution */
for (i = 0; i < dht11->num_edges; ++i) {
t = dht11->edges[i].ts - dht11->edges[i-1].ts;
if (t > 0 && t < timeres)
timeres = t;
}
if (2*timeres > DHT11_DATA_BIT_HIGH) {
pr_err("dht11: timeresolution %d too bad for decoding\n",
timeres);
return -EIO;
}
threshold = DHT11_DATA_BIT_HIGH / timeres;
if (DHT11_DATA_BIT_LOW/timeres + 1 >= threshold)
pr_err("dht11: WARNING: decoding ambiguous\n");
/* scale down with timeres and check validity */
for (i = 0; i < DHT11_BITS_PER_READ; ++i) {
t = dht11->edges[offset + 2*i + 2].ts -
dht11->edges[offset + 2*i + 1].ts;
if (!dht11->edges[offset + 2*i + 1].value)
return -EIO; /* lost synchronisation */
timing[i] = t / timeres;
}
hum_int = dht11_decode_byte(timing, threshold);
hum_dec = dht11_decode_byte(&timing[8], threshold);
temp_int = dht11_decode_byte(&timing[16], threshold);
temp_dec = dht11_decode_byte(&timing[24], threshold);
checksum = dht11_decode_byte(&timing[32], threshold);
if (((hum_int + hum_dec + temp_int + temp_dec) & 0xff) != checksum)
return -EIO;
dht11->timestamp = iio_get_time_ns();
if (hum_int < 20) { /* DHT22 */
dht11->temperature = (((temp_int & 0x7f) << 8) + temp_dec) *
((temp_int & 0x80) ? -100 : 100);
dht11->humidity = ((hum_int << 8) + hum_dec) * 100;
} else if (temp_dec == 0 && hum_dec == 0) { /* DHT11 */
dht11->temperature = temp_int * 1000;
dht11->humidity = hum_int * 1000;
} else {
dev_err(dht11->dev,
"Don't know how to decode data: %d %d %d %d\n",
hum_int, hum_dec, temp_int, temp_dec);
return -EIO;
}
return 0;
}
static int dht11_read_raw(struct iio_dev *iio_dev,
const struct iio_chan_spec *chan,
int *val, int *val2, long m)
{
struct dht11 *dht11 = iio_priv(iio_dev);
int ret;
if (dht11->timestamp + DHT11_DATA_VALID_TIME < iio_get_time_ns()) {
reinit_completion(&dht11->completion);
dht11->num_edges = 0;
ret = gpio_direction_output(dht11->gpio, 0);
if (ret)
goto err;
msleep(DHT11_START_TRANSMISSION);
ret = gpio_direction_input(dht11->gpio);
if (ret)
goto err;
ret = wait_for_completion_killable_timeout(&dht11->completion,
HZ);
if (ret == 0 && dht11->num_edges < DHT11_EDGES_PER_READ - 1) {
dev_err(&iio_dev->dev,
"Only %d signal edges detected\n",
dht11->num_edges);
ret = -ETIMEDOUT;
}
if (ret < 0)
goto err;
ret = dht11_decode(dht11,
dht11->num_edges == DHT11_EDGES_PER_READ ?
DHT11_EDGES_PREAMBLE :
DHT11_EDGES_PREAMBLE - 2);
if (ret)
goto err;
}
ret = IIO_VAL_INT;
if (chan->type == IIO_TEMP)
*val = dht11->temperature;
else if (chan->type == IIO_HUMIDITYRELATIVE)
*val = dht11->humidity;
else
ret = -EINVAL;
err:
dht11->num_edges = -1;
return ret;
}
static const struct iio_info dht11_iio_info = {
.driver_module = THIS_MODULE,
.read_raw = dht11_read_raw,
};
/*
* IRQ handler called on GPIO edges
*/
static irqreturn_t dht11_handle_irq(int irq, void *data)
{
struct iio_dev *iio = data;
struct dht11 *dht11 = iio_priv(iio);
/* TODO: Consider making the handler safe for IRQ sharing */
if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
dht11->edges[dht11->num_edges].ts = iio_get_time_ns();
dht11->edges[dht11->num_edges++].value =
gpio_get_value(dht11->gpio);
if (dht11->num_edges >= DHT11_EDGES_PER_READ)
complete(&dht11->completion);
}
return IRQ_HANDLED;
}
static const struct iio_chan_spec dht11_chan_spec[] = {
{ .type = IIO_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), },
{ .type = IIO_HUMIDITYRELATIVE,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), }
};
static const struct of_device_id dht11_dt_ids[] = {
{ .compatible = "dht11", },
{ }
};
MODULE_DEVICE_TABLE(of, dht11_dt_ids);
static int dht11_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
struct dht11 *dht11;
struct iio_dev *iio;
int ret;
iio = devm_iio_device_alloc(dev, sizeof(*dht11));
if (!iio) {
dev_err(dev, "Failed to allocate IIO device\n");
return -ENOMEM;
}
dht11 = iio_priv(iio);
dht11->dev = dev;
dht11->gpio = ret = of_get_gpio(node, 0);
if (ret < 0)
return ret;
ret = devm_gpio_request_one(dev, dht11->gpio, GPIOF_IN, pdev->name);
if (ret)
return ret;
dht11->irq = gpio_to_irq(dht11->gpio);
if (dht11->irq < 0) {
dev_err(dev, "GPIO %d has no interrupt\n", dht11->gpio);
return -EINVAL;
}
ret = devm_request_irq(dev, dht11->irq, dht11_handle_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
pdev->name, iio);
if (ret)
return ret;
dht11->timestamp = iio_get_time_ns() - DHT11_DATA_VALID_TIME - 1;
dht11->num_edges = -1;
platform_set_drvdata(pdev, iio);
init_completion(&dht11->completion);
iio->name = pdev->name;
iio->dev.parent = &pdev->dev;
iio->info = &dht11_iio_info;
iio->modes = INDIO_DIRECT_MODE;
iio->channels = dht11_chan_spec;
iio->num_channels = ARRAY_SIZE(dht11_chan_spec);
return devm_iio_device_register(dev, iio);
}
static struct platform_driver dht11_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
.of_match_table = dht11_dt_ids,
},
.probe = dht11_probe,
};
module_platform_driver(dht11_driver);
MODULE_AUTHOR("Harald Geyer <harald@ccbib.org>");
MODULE_DESCRIPTION("DHT11 humidity/temperature sensor driver");
MODULE_LICENSE("GPL v2");