From 0d3a966d2b34f449df7859fa39e3db5b71da2bfa Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 16 Jun 2017 14:36:39 +0900 Subject: [PATCH] mtd: nand: denali: avoid magic numbers and rename for clarification Introduce some macros and helpers to avoid magic numbers and rename macros/functions for clarification. - We see '| 2' in several places. This means Data Cycle in MAP11 mode. The Denali User's Guide says bit[1:0] of MAP11 is like follows: b'00 = Command Cycle b'01 = Address Cycle b'10 = Data Cycle So, this commit added DENALI_MAP11_{CMD,ADDR,DATA} macros. - We see 'denali->flash_mem + 0x10' in several places, but 0x10 is a magic number. Actually, this accesses the data port of the Host Data/Command Interface. So, this commit added DENALI_HOST_DATA. On the other hand, 'denali->flash_mem' gets access to the address port, so DENALI_HOST_ADDR was also added. - We see 'index_addr(denali, cmd, 0x1)' in denali_erase(), but 0x1 is a magic number. 0x1 means the erase operation. Replace 0x1 with DENALI_ERASE. - Rename index_addr() to denali_host_write() for clarification - Denali User's Guide says MAP{00,01,10,11} for access mode. Match the macros with terminology in the IP document. - Rename struct members as follows: flash_bank -> active_bank (currently selected bank) flash_reg -> reg (base address of registers) flash_mem -> host (base address of host interface) devnum -> devs_per_cs (devices connected in parallel) bbtskipbytes -> oob_skip_bytes (number of bytes to skip in OOB) Signed-off-by: Masahiro Yamada Signed-off-by: Boris Brezillon --- drivers/mtd/nand/denali.c | 247 +++++++++++++++++----------------- drivers/mtd/nand/denali.h | 15 +-- drivers/mtd/nand/denali_dt.c | 12 +- drivers/mtd/nand/denali_pci.c | 16 +-- 4 files changed, 144 insertions(+), 146 deletions(-) diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 5ac3eb07c6d6..d723be352148 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -31,12 +31,26 @@ MODULE_LICENSE("GPL"); #define DENALI_NAND_NAME "denali-nand" -/* - * indicates whether or not the internal value for the flash bank is - * valid or not - */ -#define CHIP_SELECT_INVALID -1 +/* Host Data/Command Interface */ +#define DENALI_HOST_ADDR 0x00 +#define DENALI_HOST_DATA 0x10 +#define DENALI_MAP00 (0 << 26) /* direct access to buffer */ +#define DENALI_MAP01 (1 << 26) /* read/write pages in PIO */ +#define DENALI_MAP10 (2 << 26) /* high-level control plane */ +#define DENALI_MAP11 (3 << 26) /* direct controller access */ + +/* MAP11 access cycle type */ +#define DENALI_MAP11_CMD ((DENALI_MAP11) | 0) /* command cycle */ +#define DENALI_MAP11_ADDR ((DENALI_MAP11) | 1) /* address cycle */ +#define DENALI_MAP11_DATA ((DENALI_MAP11) | 2) /* data cycle */ + +/* MAP10 commands */ +#define DENALI_ERASE 0x01 + +#define DENALI_BANK(denali) ((denali)->active_bank << 24) + +#define DENALI_INVALID_BANK -1 #define DENALI_NR_BANKS 4 /* @@ -56,23 +70,11 @@ static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd) return container_of(mtd_to_nand(mtd), struct denali_nand_info, nand); } -/* - * this is a helper macro that allows us to - * format the bank into the proper bits for the controller - */ -#define BANK(x) ((x) << 24) - -/* - * Certain operations for the denali NAND controller use an indexed mode to - * read/write data. The operation is performed by writing the address value - * of the command to the device memory followed by the data. This function - * abstracts this common operation. - */ -static void index_addr(struct denali_nand_info *denali, - uint32_t address, uint32_t data) +static void denali_host_write(struct denali_nand_info *denali, + uint32_t addr, uint32_t data) { - iowrite32(address, denali->flash_mem); - iowrite32(data, denali->flash_mem + 0x10); + iowrite32(addr, denali->host + DENALI_HOST_ADDR); + iowrite32(data, denali->host + DENALI_HOST_DATA); } /* @@ -81,7 +83,7 @@ static void index_addr(struct denali_nand_info *denali, */ static void detect_max_banks(struct denali_nand_info *denali) { - uint32_t features = ioread32(denali->flash_reg + FEATURES); + uint32_t features = ioread32(denali->reg + FEATURES); denali->max_banks = 1 << (features & FEATURES__N_BANKS); @@ -95,8 +97,8 @@ static void denali_enable_irq(struct denali_nand_info *denali) int i; for (i = 0; i < DENALI_NR_BANKS; i++) - iowrite32(U32_MAX, denali->flash_reg + INTR_EN(i)); - iowrite32(GLOBAL_INT_EN_FLAG, denali->flash_reg + GLOBAL_INT_ENABLE); + iowrite32(U32_MAX, denali->reg + INTR_EN(i)); + iowrite32(GLOBAL_INT_EN_FLAG, denali->reg + GLOBAL_INT_ENABLE); } static void denali_disable_irq(struct denali_nand_info *denali) @@ -104,15 +106,15 @@ static void denali_disable_irq(struct denali_nand_info *denali) int i; for (i = 0; i < DENALI_NR_BANKS; i++) - iowrite32(0, denali->flash_reg + INTR_EN(i)); - iowrite32(0, denali->flash_reg + GLOBAL_INT_ENABLE); + iowrite32(0, denali->reg + INTR_EN(i)); + iowrite32(0, denali->reg + GLOBAL_INT_ENABLE); } static void denali_clear_irq(struct denali_nand_info *denali, int bank, uint32_t irq_status) { /* write one to clear bits */ - iowrite32(irq_status, denali->flash_reg + INTR_STATUS(bank)); + iowrite32(irq_status, denali->reg + INTR_STATUS(bank)); } static void denali_clear_irq_all(struct denali_nand_info *denali) @@ -133,13 +135,13 @@ static irqreturn_t denali_isr(int irq, void *dev_id) spin_lock(&denali->irq_lock); for (i = 0; i < DENALI_NR_BANKS; i++) { - irq_status = ioread32(denali->flash_reg + INTR_STATUS(i)); + irq_status = ioread32(denali->reg + INTR_STATUS(i)); if (irq_status) ret = IRQ_HANDLED; denali_clear_irq(denali, i, irq_status); - if (i != denali->flash_bank) + if (i != denali->active_bank) continue; denali->irq_status |= irq_status; @@ -220,8 +222,8 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0; /* Enable spare area/ECC per user's request. */ - iowrite32(ecc_en_flag, denali->flash_reg + ECC_ENABLE); - iowrite32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG); + iowrite32(ecc_en_flag, denali->reg + ECC_ENABLE); + iowrite32(transfer_spare_flag, denali->reg + TRANSFER_SPARE_REG); } static void denali_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) @@ -229,10 +231,11 @@ static void denali_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) struct denali_nand_info *denali = mtd_to_denali(mtd); int i; - iowrite32(MODE_11 | BANK(denali->flash_bank) | 2, denali->flash_mem); + iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), + denali->host + DENALI_HOST_ADDR); for (i = 0; i < len; i++) - buf[i] = ioread32(denali->flash_mem + 0x10); + buf[i] = ioread32(denali->host + DENALI_HOST_DATA); } static void denali_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) @@ -240,10 +243,11 @@ static void denali_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) struct denali_nand_info *denali = mtd_to_denali(mtd); int i; - iowrite32(MODE_11 | BANK(denali->flash_bank) | 2, denali->flash_mem); + iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), + denali->host + DENALI_HOST_ADDR); for (i = 0; i < len; i++) - iowrite32(buf[i], denali->flash_mem + 0x10); + iowrite32(buf[i], denali->host + DENALI_HOST_DATA); } static void denali_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) @@ -252,10 +256,11 @@ static void denali_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) uint16_t *buf16 = (uint16_t *)buf; int i; - iowrite32(MODE_11 | BANK(denali->flash_bank) | 2, denali->flash_mem); + iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), + denali->host + DENALI_HOST_ADDR); for (i = 0; i < len / 2; i++) - buf16[i] = ioread32(denali->flash_mem + 0x10); + buf16[i] = ioread32(denali->host + DENALI_HOST_DATA); } static void denali_write_buf16(struct mtd_info *mtd, const uint8_t *buf, @@ -265,10 +270,11 @@ static void denali_write_buf16(struct mtd_info *mtd, const uint8_t *buf, const uint16_t *buf16 = (const uint16_t *)buf; int i; - iowrite32(MODE_11 | BANK(denali->flash_bank) | 2, denali->flash_mem); + iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), + denali->host + DENALI_HOST_ADDR); for (i = 0; i < len / 2; i++) - iowrite32(buf16[i], denali->flash_mem + 0x10); + iowrite32(buf16[i], denali->host + DENALI_HOST_DATA); } static uint8_t denali_read_byte(struct mtd_info *mtd) @@ -300,9 +306,9 @@ static void denali_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl) uint32_t type; if (ctrl & NAND_CLE) - type = 0; + type = DENALI_MAP11_CMD; else if (ctrl & NAND_ALE) - type = 1; + type = DENALI_MAP11_ADDR; else return; @@ -313,7 +319,7 @@ static void denali_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl) if (ctrl & NAND_CTRL_CHANGE) denali_reset_irq(denali); - index_addr(denali, MODE_11 | BANK(denali->flash_bank) | type, dat); + denali_host_write(denali, DENALI_BANK(denali) | type, dat); } static int denali_dev_ready(struct mtd_info *mtd) @@ -366,11 +372,11 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd, unsigned long *uncor_ecc_flags) { struct nand_chip *chip = mtd_to_nand(mtd); - int bank = denali->flash_bank; + int bank = denali->active_bank; uint32_t ecc_cor; unsigned int max_bitflips; - ecc_cor = ioread32(denali->flash_reg + ECC_COR_INFO(bank)); + ecc_cor = ioread32(denali->reg + ECC_COR_INFO(bank)); ecc_cor >>= ECC_COR_INFO__SHIFT(bank); if (ecc_cor & ECC_COR_INFO__UNCOR_ERR) { @@ -419,11 +425,11 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, denali_reset_irq(denali); do { - err_addr = ioread32(denali->flash_reg + ECC_ERROR_ADDRESS); + err_addr = ioread32(denali->reg + ECC_ERROR_ADDRESS); err_sector = ECC_SECTOR(err_addr); err_byte = ECC_BYTE(err_addr); - err_cor_info = ioread32(denali->flash_reg + ERR_CORRECTION_INFO); + err_cor_info = ioread32(denali->reg + ERR_CORRECTION_INFO); err_cor_value = ECC_CORRECTION_VALUE(err_cor_info); err_device = ECC_ERR_DEVICE(err_cor_info); @@ -449,7 +455,7 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, unsigned int flips_in_byte; offset = (err_sector * ecc_size + err_byte) * - denali->devnum + err_device; + denali->devs_per_cs + err_device; /* correct the ECC error */ flips_in_byte = hweight8(buf[offset] ^ err_cor_value); @@ -478,8 +484,8 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, /* programs the controller to either enable/disable DMA transfers */ static void denali_enable_dma(struct denali_nand_info *denali, bool en) { - iowrite32(en ? DMA_ENABLE__FLAG : 0, denali->flash_reg + DMA_ENABLE); - ioread32(denali->flash_reg + DMA_ENABLE); + iowrite32(en ? DMA_ENABLE__FLAG : 0, denali->reg + DMA_ENABLE); + ioread32(denali->reg + DMA_ENABLE); } static void denali_setup_dma64(struct denali_nand_info *denali, @@ -488,7 +494,7 @@ static void denali_setup_dma64(struct denali_nand_info *denali, uint32_t mode; const int page_count = 1; - mode = MODE_10 | BANK(denali->flash_bank) | page; + mode = DENALI_MAP10 | DENALI_BANK(denali) | page; /* DMA is a three step process */ @@ -496,14 +502,14 @@ static void denali_setup_dma64(struct denali_nand_info *denali, * 1. setup transfer type, interrupt when complete, * burst len = 64 bytes, the number of pages */ - index_addr(denali, mode, - 0x01002000 | (64 << 16) | (write << 8) | page_count); + denali_host_write(denali, mode, + 0x01002000 | (64 << 16) | (write << 8) | page_count); /* 2. set memory low address */ - index_addr(denali, mode, dma_addr); + denali_host_write(denali, mode, dma_addr); /* 3. set memory high address */ - index_addr(denali, mode, (uint64_t)dma_addr >> 32); + denali_host_write(denali, mode, (uint64_t)dma_addr >> 32); } static void denali_setup_dma32(struct denali_nand_info *denali, @@ -512,21 +518,22 @@ static void denali_setup_dma32(struct denali_nand_info *denali, uint32_t mode; const int page_count = 1; - mode = MODE_10 | BANK(denali->flash_bank); + mode = DENALI_MAP10 | DENALI_BANK(denali); /* DMA is a four step process */ /* 1. setup transfer type and # of pages */ - index_addr(denali, mode | page, 0x2000 | (write << 8) | page_count); + denali_host_write(denali, mode | page, + 0x2000 | (write << 8) | page_count); /* 2. set memory high address bits 23:8 */ - index_addr(denali, mode | ((dma_addr >> 16) << 8), 0x2200); + denali_host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200); /* 3. set memory low address bits 23:8 */ - index_addr(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300); + denali_host_write(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300); /* 4. interrupt when complete, burst len = 64 bytes */ - index_addr(denali, mode | 0x14000, 0x2400); + denali_host_write(denali, mode | 0x14000, 0x2400); } static void denali_setup_dma(struct denali_nand_info *denali, @@ -541,7 +548,7 @@ static void denali_setup_dma(struct denali_nand_info *denali, static int denali_pio_read(struct denali_nand_info *denali, void *buf, size_t size, int page, int raw) { - uint32_t addr = BANK(denali->flash_bank) | page; + uint32_t addr = DENALI_BANK(denali) | page; uint32_t *buf32 = (uint32_t *)buf; uint32_t irq_status, ecc_err_mask; int i; @@ -553,9 +560,9 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf, denali_reset_irq(denali); - iowrite32(MODE_01 | addr, denali->flash_mem); + iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR); for (i = 0; i < size / 4; i++) - *buf32++ = ioread32(denali->flash_mem + 0x10); + *buf32++ = ioread32(denali->host + DENALI_HOST_DATA); irq_status = denali_wait_for_irq(denali, INTR__PAGE_XFER_INC); if (!(irq_status & INTR__PAGE_XFER_INC)) @@ -570,16 +577,16 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf, static int denali_pio_write(struct denali_nand_info *denali, const void *buf, size_t size, int page, int raw) { - uint32_t addr = BANK(denali->flash_bank) | page; + uint32_t addr = DENALI_BANK(denali) | page; const uint32_t *buf32 = (uint32_t *)buf; uint32_t irq_status; int i; denali_reset_irq(denali); - iowrite32(MODE_01 | addr, denali->flash_mem); + iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR); for (i = 0; i < size / 4; i++) - iowrite32(*buf32++, denali->flash_mem + 0x10); + iowrite32(*buf32++, denali->host + DENALI_HOST_DATA); irq_status = denali_wait_for_irq(denali, INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL); @@ -672,7 +679,7 @@ static void denali_oob_xfer(struct mtd_info *mtd, struct nand_chip *chip, int ecc_steps = chip->ecc.steps; int ecc_size = chip->ecc.size; int ecc_bytes = chip->ecc.bytes; - int oob_skip = denali->bbtskipbytes; + int oob_skip = denali->oob_skip_bytes; size_t size = writesize + oobsize; int i, pos, len; @@ -730,7 +737,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, int ecc_size = chip->ecc.size; int ecc_bytes = chip->ecc.bytes; void *dma_buf = denali->buf; - int oob_skip = denali->bbtskipbytes; + int oob_skip = denali->oob_skip_bytes; size_t size = writesize + oobsize; int ret, i, pos, len; @@ -861,7 +868,7 @@ static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, int ecc_size = chip->ecc.size; int ecc_bytes = chip->ecc.bytes; void *dma_buf = denali->buf; - int oob_skip = denali->bbtskipbytes; + int oob_skip = denali->oob_skip_bytes; size_t size = writesize + oobsize; int i, pos, len; @@ -942,7 +949,7 @@ static void denali_select_chip(struct mtd_info *mtd, int chip) { struct denali_nand_info *denali = mtd_to_denali(mtd); - denali->flash_bank = chip; + denali->active_bank = chip; } static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) @@ -959,13 +966,12 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) static int denali_erase(struct mtd_info *mtd, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); - uint32_t cmd, irq_status; + uint32_t irq_status; denali_reset_irq(denali); - /* setup page read request for access type */ - cmd = MODE_10 | BANK(denali->flash_bank) | page; - index_addr(denali, cmd, 0x1); + denali_host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page, + DENALI_ERASE); /* wait for erase to complete or failure to occur */ irq_status = denali_wait_for_irq(denali, @@ -1004,37 +1010,37 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, acc_clks = DIV_ROUND_UP(timings->tREA_max, t_clk); acc_clks = min_t(int, acc_clks, ACC_CLKS__VALUE); - tmp = ioread32(denali->flash_reg + ACC_CLKS); + tmp = ioread32(denali->reg + ACC_CLKS); tmp &= ~ACC_CLKS__VALUE; tmp |= acc_clks; - iowrite32(tmp, denali->flash_reg + ACC_CLKS); + iowrite32(tmp, denali->reg + ACC_CLKS); /* tRWH -> RE_2_WE */ re_2_we = DIV_ROUND_UP(timings->tRHW_min, t_clk); re_2_we = min_t(int, re_2_we, RE_2_WE__VALUE); - tmp = ioread32(denali->flash_reg + RE_2_WE); + tmp = ioread32(denali->reg + RE_2_WE); tmp &= ~RE_2_WE__VALUE; tmp |= re_2_we; - iowrite32(tmp, denali->flash_reg + RE_2_WE); + iowrite32(tmp, denali->reg + RE_2_WE); /* tRHZ -> RE_2_RE */ re_2_re = DIV_ROUND_UP(timings->tRHZ_max, t_clk); re_2_re = min_t(int, re_2_re, RE_2_RE__VALUE); - tmp = ioread32(denali->flash_reg + RE_2_RE); + tmp = ioread32(denali->reg + RE_2_RE); tmp &= ~RE_2_RE__VALUE; tmp |= re_2_re; - iowrite32(tmp, denali->flash_reg + RE_2_RE); + iowrite32(tmp, denali->reg + RE_2_RE); /* tWHR -> WE_2_RE */ we_2_re = DIV_ROUND_UP(timings->tWHR_min, t_clk); we_2_re = min_t(int, we_2_re, TWHR2_AND_WE_2_RE__WE_2_RE); - tmp = ioread32(denali->flash_reg + TWHR2_AND_WE_2_RE); + tmp = ioread32(denali->reg + TWHR2_AND_WE_2_RE); tmp &= ~TWHR2_AND_WE_2_RE__WE_2_RE; tmp |= we_2_re; - iowrite32(tmp, denali->flash_reg + TWHR2_AND_WE_2_RE); + iowrite32(tmp, denali->reg + TWHR2_AND_WE_2_RE); /* tADL -> ADDR_2_DATA */ @@ -1046,20 +1052,20 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, addr_2_data = DIV_ROUND_UP(timings->tADL_min, t_clk); addr_2_data = min_t(int, addr_2_data, addr_2_data_mask); - tmp = ioread32(denali->flash_reg + TCWAW_AND_ADDR_2_DATA); + tmp = ioread32(denali->reg + TCWAW_AND_ADDR_2_DATA); tmp &= ~addr_2_data_mask; tmp |= addr_2_data; - iowrite32(tmp, denali->flash_reg + TCWAW_AND_ADDR_2_DATA); + iowrite32(tmp, denali->reg + TCWAW_AND_ADDR_2_DATA); /* tREH, tWH -> RDWR_EN_HI_CNT */ rdwr_en_hi = DIV_ROUND_UP(max(timings->tREH_min, timings->tWH_min), t_clk); rdwr_en_hi = min_t(int, rdwr_en_hi, RDWR_EN_HI_CNT__VALUE); - tmp = ioread32(denali->flash_reg + RDWR_EN_HI_CNT); + tmp = ioread32(denali->reg + RDWR_EN_HI_CNT); tmp &= ~RDWR_EN_HI_CNT__VALUE; tmp |= rdwr_en_hi; - iowrite32(tmp, denali->flash_reg + RDWR_EN_HI_CNT); + iowrite32(tmp, denali->reg + RDWR_EN_HI_CNT); /* tRP, tWP -> RDWR_EN_LO_CNT */ rdwr_en_lo = DIV_ROUND_UP(max(timings->tRP_min, timings->tWP_min), @@ -1070,10 +1076,10 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, rdwr_en_lo = max(rdwr_en_lo, rdwr_en_lo_hi - rdwr_en_hi); rdwr_en_lo = min_t(int, rdwr_en_lo, RDWR_EN_LO_CNT__VALUE); - tmp = ioread32(denali->flash_reg + RDWR_EN_LO_CNT); + tmp = ioread32(denali->reg + RDWR_EN_LO_CNT); tmp &= ~RDWR_EN_LO_CNT__VALUE; tmp |= rdwr_en_lo; - iowrite32(tmp, denali->flash_reg + RDWR_EN_LO_CNT); + iowrite32(tmp, denali->reg + RDWR_EN_LO_CNT); /* tCS, tCEA -> CS_SETUP_CNT */ cs_setup = max3((int)DIV_ROUND_UP(timings->tCS_min, t_clk) - rdwr_en_lo, @@ -1081,10 +1087,10 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, 0); cs_setup = min_t(int, cs_setup, CS_SETUP_CNT__VALUE); - tmp = ioread32(denali->flash_reg + CS_SETUP_CNT); + tmp = ioread32(denali->reg + CS_SETUP_CNT); tmp &= ~CS_SETUP_CNT__VALUE; tmp |= cs_setup; - iowrite32(tmp, denali->flash_reg + CS_SETUP_CNT); + iowrite32(tmp, denali->reg + CS_SETUP_CNT); return 0; } @@ -1095,12 +1101,12 @@ static void denali_reset_banks(struct denali_nand_info *denali) int i; for (i = 0; i < denali->max_banks; i++) { - denali->flash_bank = i; + denali->active_bank = i; denali_reset_irq(denali); iowrite32(DEVICE_RESET__BANK(i), - denali->flash_reg + DEVICE_RESET); + denali->reg + DEVICE_RESET); irq_status = denali_wait_for_irq(denali, INTR__RST_COMP | INTR__INT_ACT | INTR__TIME_OUT); @@ -1119,8 +1125,7 @@ static void denali_hw_init(struct denali_nand_info *denali) * override it. */ if (!denali->revision) - denali->revision = - swab16(ioread32(denali->flash_reg + REVISION)); + denali->revision = swab16(ioread32(denali->reg + REVISION)); /* * tell driver how many bit controller will skip before @@ -1128,18 +1133,16 @@ static void denali_hw_init(struct denali_nand_info *denali) * set by firmware. So we read this value out. * if this value is 0, just let it be. */ - denali->bbtskipbytes = ioread32(denali->flash_reg + - SPARE_AREA_SKIP_BYTES); + denali->oob_skip_bytes = ioread32(denali->reg + SPARE_AREA_SKIP_BYTES); detect_max_banks(denali); - iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED); - iowrite32(CHIP_EN_DONT_CARE__FLAG, - denali->flash_reg + CHIP_ENABLE_DONT_CARE); + iowrite32(0x0F, denali->reg + RB_PIN_ENABLED); + iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE); - iowrite32(0xffff, denali->flash_reg + SPARE_AREA_MARKER); + iowrite32(0xffff, denali->reg + SPARE_AREA_MARKER); /* Should set value for these registers when init */ - iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES); - iowrite32(1, denali->flash_reg + ECC_ENABLE); + iowrite32(0, denali->reg + TWO_ROW_ADDR_CYCLES); + iowrite32(1, denali->reg + ECC_ENABLE); } int denali_calc_ecc_bytes(int step_size, int strength) @@ -1152,7 +1155,7 @@ EXPORT_SYMBOL(denali_calc_ecc_bytes); static int denali_ecc_setup(struct mtd_info *mtd, struct nand_chip *chip, struct denali_nand_info *denali) { - int oobavail = mtd->oobsize - denali->bbtskipbytes; + int oobavail = mtd->oobsize - denali->oob_skip_bytes; int ret; /* @@ -1185,7 +1188,7 @@ static int denali_ooblayout_ecc(struct mtd_info *mtd, int section, if (section) return -ERANGE; - oobregion->offset = denali->bbtskipbytes; + oobregion->offset = denali->oob_skip_bytes; oobregion->length = chip->ecc.total; return 0; @@ -1200,7 +1203,7 @@ static int denali_ooblayout_free(struct mtd_info *mtd, int section, if (section) return -ERANGE; - oobregion->offset = chip->ecc.total + denali->bbtskipbytes; + oobregion->offset = chip->ecc.total + denali->oob_skip_bytes; oobregion->length = mtd->oobsize - oobregion->offset; return 0; @@ -1239,23 +1242,23 @@ static int denali_multidev_fixup(struct denali_nand_info *denali) * In this case, the core framework knows nothing about this fact, * so we should tell it the _logical_ pagesize and anything necessary. */ - denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED); + denali->devs_per_cs = ioread32(denali->reg + DEVICES_CONNECTED); /* * On some SoCs, DEVICES_CONNECTED is not auto-detected. * For those, DEVICES_CONNECTED is left to 0. Set 1 if it is the case. */ - if (denali->devnum == 0) { - denali->devnum = 1; - iowrite32(1, denali->flash_reg + DEVICES_CONNECTED); + if (denali->devs_per_cs == 0) { + denali->devs_per_cs = 1; + iowrite32(1, denali->reg + DEVICES_CONNECTED); } - if (denali->devnum == 1) + if (denali->devs_per_cs == 1) return 0; - if (denali->devnum != 2) { + if (denali->devs_per_cs != 2) { dev_err(denali->dev, "unsupported number of devices %d\n", - denali->devnum); + denali->devs_per_cs); return -EINVAL; } @@ -1273,7 +1276,7 @@ static int denali_multidev_fixup(struct denali_nand_info *denali) chip->ecc.size <<= 1; chip->ecc.bytes <<= 1; chip->ecc.strength <<= 1; - denali->bbtskipbytes <<= 1; + denali->oob_skip_bytes <<= 1; return 0; } @@ -1301,7 +1304,7 @@ int denali_init(struct denali_nand_info *denali) denali_enable_irq(denali); denali_reset_banks(denali); - denali->flash_bank = CHIP_SELECT_INVALID; + denali->active_bank = DENALI_INVALID_BANK; nand_set_flash_node(chip, denali->dev->of_node); /* Fallback to the default name if DT did not give "label" property */ @@ -1330,7 +1333,7 @@ int denali_init(struct denali_nand_info *denali) if (ret) goto disable_irq; - if (ioread32(denali->flash_reg + FEATURES) & FEATURES__DMA) + if (ioread32(denali->reg + FEATURES) & FEATURES__DMA) denali->dma_avail = 1; if (denali->dma_avail) { @@ -1374,19 +1377,19 @@ int denali_init(struct denali_nand_info *denali) chip->ecc.size, chip->ecc.strength, chip->ecc.bytes); iowrite32(MAKE_ECC_CORRECTION(chip->ecc.strength, 1), - denali->flash_reg + ECC_CORRECTION); + denali->reg + ECC_CORRECTION); iowrite32(mtd->erasesize / mtd->writesize, - denali->flash_reg + PAGES_PER_BLOCK); + denali->reg + PAGES_PER_BLOCK); iowrite32(chip->options & NAND_BUSWIDTH_16 ? 1 : 0, - denali->flash_reg + DEVICE_WIDTH); - iowrite32(mtd->writesize, denali->flash_reg + DEVICE_MAIN_AREA_SIZE); - iowrite32(mtd->oobsize, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); + denali->reg + DEVICE_WIDTH); + iowrite32(mtd->writesize, denali->reg + DEVICE_MAIN_AREA_SIZE); + iowrite32(mtd->oobsize, denali->reg + DEVICE_SPARE_AREA_SIZE); - iowrite32(chip->ecc.size, denali->flash_reg + CFG_DATA_BLOCK_SIZE); - iowrite32(chip->ecc.size, denali->flash_reg + CFG_LAST_DATA_BLOCK_SIZE); + iowrite32(chip->ecc.size, denali->reg + CFG_DATA_BLOCK_SIZE); + iowrite32(chip->ecc.size, denali->reg + CFG_LAST_DATA_BLOCK_SIZE); /* chip->ecc.steps is set by nand_scan_tail(); not available here */ iowrite32(mtd->writesize / chip->ecc.size, - denali->flash_reg + CFG_NUM_DATA_BLOCKS); + denali->reg + CFG_NUM_DATA_BLOCKS); mtd_set_ooblayout(mtd, &denali_ooblayout_ops); diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index 657a794af695..237cc706b0fb 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -303,18 +303,13 @@ #define CHNL_ACTIVE__CHANNEL2 BIT(2) #define CHNL_ACTIVE__CHANNEL3 BIT(3) -#define MODE_00 0x00000000 -#define MODE_01 0x04000000 -#define MODE_10 0x08000000 -#define MODE_11 0x0C000000 - struct denali_nand_info { struct nand_chip nand; unsigned long clk_x_rate; /* bus interface clock rate */ - int flash_bank; /* currently selected chip */ + int active_bank; /* currently selected bank */ struct device *dev; - void __iomem *flash_reg; /* Register Interface */ - void __iomem *flash_mem; /* Host Data/Command Interface */ + void __iomem *reg; /* Register Interface */ + void __iomem *host; /* Host Data/Command Interface */ /* elements used by ISR */ struct completion complete; @@ -326,8 +321,8 @@ struct denali_nand_info { void *buf; dma_addr_t dma_addr; int dma_avail; - int devnum; /* represent how many nands connected */ - int bbtskipbytes; + int devs_per_cs; /* devices connected in parallel */ + int oob_skip_bytes; int max_banks; unsigned int revision; unsigned int caps; diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c index ebcce50f4005..47f398edf18f 100644 --- a/drivers/mtd/nand/denali_dt.c +++ b/drivers/mtd/nand/denali_dt.c @@ -104,14 +104,14 @@ static int denali_dt_probe(struct platform_device *pdev) } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "denali_reg"); - denali->flash_reg = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(denali->flash_reg)) - return PTR_ERR(denali->flash_reg); + denali->reg = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(denali->reg)) + return PTR_ERR(denali->reg); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data"); - denali->flash_mem = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(denali->flash_mem)) - return PTR_ERR(denali->flash_mem); + denali->host = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(denali->host)) + return PTR_ERR(denali->host); dt->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(dt->clk)) { diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c index 6217525c1000..81370c79aa48 100644 --- a/drivers/mtd/nand/denali_pci.c +++ b/drivers/mtd/nand/denali_pci.c @@ -78,14 +78,14 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) return ret; } - denali->flash_reg = ioremap_nocache(csr_base, csr_len); - if (!denali->flash_reg) { + denali->reg = ioremap_nocache(csr_base, csr_len); + if (!denali->reg) { dev_err(&dev->dev, "Spectra: Unable to remap memory region\n"); return -ENOMEM; } - denali->flash_mem = ioremap_nocache(mem_base, mem_len); - if (!denali->flash_mem) { + denali->host = ioremap_nocache(mem_base, mem_len); + if (!denali->host) { dev_err(&dev->dev, "Spectra: ioremap_nocache failed!"); ret = -ENOMEM; goto failed_remap_reg; @@ -100,9 +100,9 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) return 0; failed_remap_mem: - iounmap(denali->flash_mem); + iounmap(denali->host); failed_remap_reg: - iounmap(denali->flash_reg); + iounmap(denali->reg); return ret; } @@ -112,8 +112,8 @@ static void denali_pci_remove(struct pci_dev *dev) struct denali_nand_info *denali = pci_get_drvdata(dev); denali_remove(denali); - iounmap(denali->flash_reg); - iounmap(denali->flash_mem); + iounmap(denali->reg); + iounmap(denali->host); } static struct pci_driver denali_pci_driver = {