mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 13:55:32 +00:00
myri10ge: update firmware headers
Update myri10ge firmware headers. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
parent
e8f720fdec
commit
0f7229dde3
2 changed files with 64 additions and 31 deletions
|
@ -10,7 +10,7 @@ struct mcp_dma_addr {
|
|||
__be32 low;
|
||||
};
|
||||
|
||||
/* 4 Bytes. 8 Bytes for NDIS drivers. */
|
||||
/* 4 Bytes */
|
||||
struct mcp_slot {
|
||||
__sum16 checksum;
|
||||
__be16 length;
|
||||
|
@ -144,6 +144,7 @@ enum myri10ge_mcp_cmd_type {
|
|||
* a power of 2 number of entries. */
|
||||
|
||||
MXGEFW_CMD_SET_INTRQ_SIZE, /* in bytes */
|
||||
#define MXGEFW_CMD_SET_INTRQ_SIZE_FLAG_NO_STRICT_SIZE_CHECK (1 << 31)
|
||||
|
||||
/* command to bring ethernet interface up. Above parameters
|
||||
* (plus mtu & mac address) must have been exchanged prior
|
||||
|
@ -221,10 +222,14 @@ enum myri10ge_mcp_cmd_type {
|
|||
MXGEFW_CMD_GET_MAX_RSS_QUEUES,
|
||||
MXGEFW_CMD_ENABLE_RSS_QUEUES,
|
||||
/* data0 = number of slices n (0, 1, ..., n-1) to enable
|
||||
* data1 = interrupt mode. 0=share one INTx/MSI, 1=use one MSI-X per queue.
|
||||
* data1 = interrupt mode.
|
||||
* 0=share one INTx/MSI, 1=use one MSI-X per queue.
|
||||
* If all queues share one interrupt, the driver must have set
|
||||
* RSS_SHARED_INTERRUPT_DMA before enabling queues.
|
||||
*/
|
||||
#define MXGEFW_SLICE_INTR_MODE_SHARED 0
|
||||
#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 1
|
||||
|
||||
MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET,
|
||||
MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA,
|
||||
/* data0, data1 = bus address lsw, msw */
|
||||
|
@ -241,10 +246,14 @@ enum myri10ge_mcp_cmd_type {
|
|||
* 0: disable rss. nic does not distribute receive packets.
|
||||
* 1: enable rss. nic distributes receive packets among queues.
|
||||
* data1 = hash type
|
||||
* 1: IPV4
|
||||
* 2: TCP_IPV4
|
||||
* 3: IPV4 | TCP_IPV4
|
||||
* 1: IPV4 (required by RSS)
|
||||
* 2: TCP_IPV4 (required by RSS)
|
||||
* 3: IPV4 | TCP_IPV4 (required by RSS)
|
||||
* 4: source port
|
||||
*/
|
||||
#define MXGEFW_RSS_HASH_TYPE_IPV4 0x1
|
||||
#define MXGEFW_RSS_HASH_TYPE_TCP_IPV4 0x2
|
||||
#define MXGEFW_RSS_HASH_TYPE_SRC_PORT 0x4
|
||||
|
||||
MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
|
||||
/* Return data = the max. size of the entire headers of a IPv6 TSO packet.
|
||||
|
@ -260,6 +269,8 @@ enum myri10ge_mcp_cmd_type {
|
|||
* 0: Linux/FreeBSD style (NIC default)
|
||||
* 1: NDIS/NetBSD style
|
||||
*/
|
||||
#define MXGEFW_TSO_MODE_LINUX 0
|
||||
#define MXGEFW_TSO_MODE_NDIS 1
|
||||
|
||||
MXGEFW_CMD_MDIO_READ,
|
||||
/* data0 = dev_addr (PMA/PMD or PCS ...), data1 = register/addr */
|
||||
|
@ -286,6 +297,38 @@ enum myri10ge_mcp_cmd_type {
|
|||
/* Return data = NIC memory offset of mcp_vpump_public_global */
|
||||
MXGEFW_CMD_RESET_VPUMP,
|
||||
/* Resets the VPUMP state */
|
||||
|
||||
MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE,
|
||||
/* data0 = mcp_slot type to use.
|
||||
* 0 = the default 4B mcp_slot
|
||||
* 1 = 8B mcp_slot_8
|
||||
*/
|
||||
#define MXGEFW_RSS_MCP_SLOT_TYPE_MIN 0
|
||||
#define MXGEFW_RSS_MCP_SLOT_TYPE_WITH_HASH 1
|
||||
|
||||
MXGEFW_CMD_SET_THROTTLE_FACTOR,
|
||||
/* set the throttle factor for ethp_z8e
|
||||
* data0 = throttle_factor
|
||||
* throttle_factor = 256 * pcie-raw-speed / tx_speed
|
||||
* tx_speed = 256 * pcie-raw-speed / throttle_factor
|
||||
*
|
||||
* For PCI-E x8: pcie-raw-speed == 16Gb/s
|
||||
* For PCI-E x4: pcie-raw-speed == 8Gb/s
|
||||
*
|
||||
* ex1: throttle_factor == 0x1a0 (416), tx_speed == 1.23GB/s == 9.846 Gb/s
|
||||
* ex2: throttle_factor == 0x200 (512), tx_speed == 1.0GB/s == 8 Gb/s
|
||||
*
|
||||
* with tx_boundary == 2048, max-throttle-factor == 8191 => min-speed == 500Mb/s
|
||||
* with tx_boundary == 4096, max-throttle-factor == 4095 => min-speed == 1Gb/s
|
||||
*/
|
||||
|
||||
MXGEFW_CMD_VPUMP_UP,
|
||||
/* Allocates VPump Connection, Send Request and Zero copy buffer address tables */
|
||||
MXGEFW_CMD_GET_VPUMP_CLK,
|
||||
/* Get the lanai clock */
|
||||
|
||||
MXGEFW_CMD_GET_DCA_OFFSET,
|
||||
/* offset of dca control for WDMAs */
|
||||
};
|
||||
|
||||
enum myri10ge_mcp_cmd_status {
|
||||
|
@ -302,7 +345,8 @@ enum myri10ge_mcp_cmd_status {
|
|||
MXGEFW_CMD_ERROR_UNALIGNED,
|
||||
MXGEFW_CMD_ERROR_NO_MDIO,
|
||||
MXGEFW_CMD_ERROR_XFP_FAILURE,
|
||||
MXGEFW_CMD_ERROR_XFP_ABSENT
|
||||
MXGEFW_CMD_ERROR_XFP_ABSENT,
|
||||
MXGEFW_CMD_ERROR_BAD_PCIE_LINK
|
||||
};
|
||||
|
||||
#define MXGEFW_OLD_IRQ_DATA_LEN 40
|
||||
|
|
|
@ -1,30 +1,6 @@
|
|||
#ifndef __MYRI10GE_MCP_GEN_HEADER_H__
|
||||
#define __MYRI10GE_MCP_GEN_HEADER_H__
|
||||
|
||||
/* this file define a standard header used as a first entry point to
|
||||
* exchange information between firmware/driver and driver. The
|
||||
* header structure can be anywhere in the mcp. It will usually be in
|
||||
* the .data section, because some fields needs to be initialized at
|
||||
* compile time.
|
||||
* The 32bit word at offset MX_HEADER_PTR_OFFSET in the mcp must
|
||||
* contains the location of the header.
|
||||
*
|
||||
* Typically a MCP will start with the following:
|
||||
* .text
|
||||
* .space 52 ! to help catch MEMORY_INT errors
|
||||
* bt start ! jump to real code
|
||||
* nop
|
||||
* .long _gen_mcp_header
|
||||
*
|
||||
* The source will have a definition like:
|
||||
*
|
||||
* mcp_gen_header_t gen_mcp_header = {
|
||||
* .header_length = sizeof(mcp_gen_header_t),
|
||||
* .mcp_type = MCP_TYPE_XXX,
|
||||
* .version = "something $Id: mcp_gen_header.h,v 1.2 2006/05/13 10:04:35 bgoglin Exp $",
|
||||
* .mcp_globals = (unsigned)&Globals
|
||||
* };
|
||||
*/
|
||||
|
||||
#define MCP_HEADER_PTR_OFFSET 0x3c
|
||||
|
||||
|
@ -32,13 +8,14 @@
|
|||
#define MCP_TYPE_PCIE 0x70636965 /* "PCIE" pcie-only MCP */
|
||||
#define MCP_TYPE_ETH 0x45544820 /* "ETH " */
|
||||
#define MCP_TYPE_MCP0 0x4d435030 /* "MCP0" */
|
||||
#define MCP_TYPE_DFLT 0x20202020 /* " " */
|
||||
|
||||
struct mcp_gen_header {
|
||||
/* the first 4 fields are filled at compile time */
|
||||
unsigned header_length;
|
||||
__be32 mcp_type;
|
||||
char version[128];
|
||||
unsigned mcp_globals; /* pointer to mcp-type specific structure */
|
||||
unsigned mcp_private; /* pointer to mcp-type specific structure */
|
||||
|
||||
/* filled by the MCP at run-time */
|
||||
unsigned sram_size;
|
||||
|
@ -53,6 +30,18 @@ struct mcp_gen_header {
|
|||
*
|
||||
* Never remove any field. Keep everything naturally align.
|
||||
*/
|
||||
|
||||
/* Specifies if the running mcp is mcp0, 1, or 2. */
|
||||
unsigned char mcp_index;
|
||||
unsigned char disable_rabbit;
|
||||
unsigned char unaligned_tlp;
|
||||
unsigned char pad1;
|
||||
unsigned counters_addr;
|
||||
unsigned copy_block_info; /* for small mcps loaded with "lload -d" */
|
||||
unsigned short handoff_id_major; /* must be equal */
|
||||
unsigned short handoff_id_caps; /* bitfield: new mcp must have superset */
|
||||
unsigned msix_table_addr; /* start address of msix table in firmware */
|
||||
/* 8 */
|
||||
};
|
||||
|
||||
#endif /* __MYRI10GE_MCP_GEN_HEADER_H__ */
|
||||
|
|
Loading…
Reference in a new issue