Merge branches 'pm-cpuidle' and 'pm-tools'

* pm-cpuidle:
  cpuidle: poll_state: Avoid invoking local_clock() too often
  PM: cpuidle/suspend: Add s2idle usage and time state attributes
  cpuidle: Enable coupled cpuidle support on Exynos3250 platform
  cpuidle: poll_state: Add time limit to poll_idle()
  ARM: cpuidle: Drop memory allocation error message from arm_idle_init_cpu()

* pm-tools:
  pm-graph: AnalyzeSuspend v5.0
  pm-graph: AnalyzeBoot v2.2
  pm-graph: config files and installer

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -198,6 +198,31 @@ Description:
 		time (in microseconds) this cpu should spend in this idle state
 		to make the transition worth the effort.
 
+What:		/sys/devices/system/cpu/cpuX/cpuidle/stateN/s2idle/
+Date:		March 2018
+KernelVersion:	v4.17
+Contact:	Linux power management list <linux-pm@vger.kernel.org>
+Description:
+		Idle state usage statistics related to suspend-to-idle.
+
+		This attribute group is only present for states that can be
+		used in suspend-to-idle with suspended timekeeping.
+
+What:		/sys/devices/system/cpu/cpuX/cpuidle/stateN/s2idle/time
+Date:		March 2018
+KernelVersion:	v4.17
+Contact:	Linux power management list <linux-pm@vger.kernel.org>
+Description:
+		Total time spent by the CPU in suspend-to-idle (with scheduler
+		tick suspended) after requesting this state.
+
+What:		/sys/devices/system/cpu/cpuX/cpuidle/stateN/s2idle/usage
+Date:		March 2018
+KernelVersion:	v4.17
+Contact:	Linux power management list <linux-pm@vger.kernel.org>
+Description:
+		Total number of times this state has been requested by the CPU
+		while entering suspend-to-idle.
 
 What:		/sys/devices/system/cpu/cpu#/cpufreq/*
 Date:		pre-git history

drivers/cpuidle/cpuidle-arm.c

@@ -129,7 +129,6 @@ static int __init arm_idle_init_cpu(int cpu)
 
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (!dev) {
-		pr_err("Failed to allocate cpuidle device\n");
 		ret = -ENOMEM;
 		goto out_unregister_drv;
 	}

drivers/cpuidle/cpuidle-exynos.c

@@ -117,7 +117,8 @@ static int exynos_cpuidle_probe(struct platform_device *pdev)
 	int ret;
 
 	if (IS_ENABLED(CONFIG_SMP) &&
-	    of_machine_is_compatible("samsung,exynos4210")) {
+	    (of_machine_is_compatible("samsung,exynos4210") ||
+	     of_machine_is_compatible("samsung,exynos3250"))) {
 		exynos_cpuidle_pdata = pdev->dev.platform_data;
 
 		ret = cpuidle_register(&exynos_coupled_idle_driver,

drivers/cpuidle/cpuidle.c

@@ -131,6 +131,10 @@ int cpuidle_find_deepest_state(struct cpuidle_driver *drv,
 static void enter_s2idle_proper(struct cpuidle_driver *drv,
 				struct cpuidle_device *dev, int index)
 {
+	ktime_t time_start, time_end;
+
+	time_start = ns_to_ktime(local_clock());
+
 	/*
 	 * trace_suspend_resume() called by tick_freeze() for the last CPU
 	 * executing it contains RCU usage regarded as invalid in the idle
@@ -152,6 +156,11 @@ static void enter_s2idle_proper(struct cpuidle_driver *drv,
 	 */
 	RCU_NONIDLE(tick_unfreeze());
 	start_critical_timings();
+
+	time_end = ns_to_ktime(local_clock());
+
+	dev->states_usage[index].s2idle_time += ktime_us_delta(time_end, time_start);
+	dev->states_usage[index].s2idle_usage++;
 }
 
 /**

drivers/cpuidle/poll_state.c

@@ -6,15 +6,30 @@
 
 #include <linux/cpuidle.h>
 #include <linux/sched.h>
+#include <linux/sched/clock.h>
 #include <linux/sched/idle.h>
 
+#define POLL_IDLE_TIME_LIMIT	(TICK_NSEC / 16)
+#define POLL_IDLE_RELAX_COUNT	200
+
 static int __cpuidle poll_idle(struct cpuidle_device *dev,
 			       struct cpuidle_driver *drv, int index)
 {
+	u64 time_start = local_clock();
+
 	local_irq_enable();
 	if (!current_set_polling_and_test()) {
-		while (!need_resched())
+		unsigned int loop_count = 0;
+
+		while (!need_resched()) {
 			cpu_relax();
+			if (loop_count++ < POLL_IDLE_RELAX_COUNT)
+				continue;
+
+			loop_count = 0;
+			if (local_clock() - time_start > POLL_IDLE_TIME_LIMIT)
+				break;
+		}
 	}
 	current_clr_polling();
 

drivers/cpuidle/sysfs.c

@@ -330,6 +330,58 @@ struct cpuidle_state_kobj {
 	struct kobject kobj;
 };
 
+#ifdef CONFIG_SUSPEND
+#define define_show_state_s2idle_ull_function(_name) \
+static ssize_t show_state_s2idle_##_name(struct cpuidle_state *state, \
+					 struct cpuidle_state_usage *state_usage, \
+					 char *buf)				\
+{ \
+	return sprintf(buf, "%llu\n", state_usage->s2idle_##_name);\
+}
+
+define_show_state_s2idle_ull_function(usage);
+define_show_state_s2idle_ull_function(time);
+
+#define define_one_state_s2idle_ro(_name, show) \
+static struct cpuidle_state_attr attr_s2idle_##_name = \
+	__ATTR(_name, 0444, show, NULL)
+
+define_one_state_s2idle_ro(usage, show_state_s2idle_usage);
+define_one_state_s2idle_ro(time, show_state_s2idle_time);
+
+static struct attribute *cpuidle_state_s2idle_attrs[] = {
+	&attr_s2idle_usage.attr,
+	&attr_s2idle_time.attr,
+	NULL
+};
+
+static const struct attribute_group cpuidle_state_s2idle_group = {
+	.name	= "s2idle",
+	.attrs	= cpuidle_state_s2idle_attrs,
+};
+
+static void cpuidle_add_s2idle_attr_group(struct cpuidle_state_kobj *kobj)
+{
+	int ret;
+
+	if (!kobj->state->enter_s2idle)
+		return;
+
+	ret = sysfs_create_group(&kobj->kobj, &cpuidle_state_s2idle_group);
+	if (ret)
+		pr_debug("%s: sysfs attribute group not created\n", __func__);
+}
+
+static void cpuidle_remove_s2idle_attr_group(struct cpuidle_state_kobj *kobj)
+{
+	if (kobj->state->enter_s2idle)
+		sysfs_remove_group(&kobj->kobj, &cpuidle_state_s2idle_group);
+}
+#else
+static inline void cpuidle_add_s2idle_attr_group(struct cpuidle_state_kobj *kobj) { }
+static inline void cpuidle_remove_s2idle_attr_group(struct cpuidle_state_kobj *kobj) { }
+#endif /* CONFIG_SUSPEND */
+
 #define kobj_to_state_obj(k) container_of(k, struct cpuidle_state_kobj, kobj)
 #define kobj_to_state(k) (kobj_to_state_obj(k)->state)
 #define kobj_to_state_usage(k) (kobj_to_state_obj(k)->state_usage)
@@ -383,6 +435,7 @@ static struct kobj_type ktype_state_cpuidle = {
 
 static inline void cpuidle_free_state_kobj(struct cpuidle_device *device, int i)
 {
+	cpuidle_remove_s2idle_attr_group(device->kobjs[i]);
 	kobject_put(&device->kobjs[i]->kobj);
 	wait_for_completion(&device->kobjs[i]->kobj_unregister);
 	kfree(device->kobjs[i]);
@@ -417,6 +470,7 @@ static int cpuidle_add_state_sysfs(struct cpuidle_device *device)
 			kfree(kobj);
 			goto error_state;
 		}
+		cpuidle_add_s2idle_attr_group(kobj);
 		kobject_uevent(&kobj->kobj, KOBJ_ADD);
 		device->kobjs[i] = kobj;
 	}

include/linux/cpuidle.h

@@ -33,6 +33,10 @@ struct cpuidle_state_usage {
 	unsigned long long	disable;
 	unsigned long long	usage;
 	unsigned long long	time; /* in US */
+#ifdef CONFIG_SUSPEND
+	unsigned long long	s2idle_usage;
+	unsigned long long	s2idle_time; /* in US */
+#endif
 };
 
 struct cpuidle_state {

tools/power/pm-graph/Makefile

@@ -7,11 +7,24 @@ all:
 
 install : uninstall
 	install -d  $(DESTDIR)$(PREFIX)/lib/pm-graph
-	install analyze_suspend.py $(DESTDIR)$(PREFIX)/lib/pm-graph
+	install sleepgraph.py $(DESTDIR)$(PREFIX)/lib/pm-graph
-	install analyze_boot.py $(DESTDIR)$(PREFIX)/lib/pm-graph
+	install bootgraph.py $(DESTDIR)$(PREFIX)/lib/pm-graph
+	install -d  $(DESTDIR)$(PREFIX)/lib/pm-graph/config
+	install -m 644 config/cgskip.txt $(DESTDIR)$(PREFIX)/lib/pm-graph/config
+	install -m 644 config/freeze-callgraph.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config
+	install -m 644 config/freeze.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config
+	install -m 644 config/freeze-dev.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config
+	install -m 644 config/standby-callgraph.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config
+	install -m 644 config/standby.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config
+	install -m 644 config/standby-dev.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config
+	install -m 644 config/suspend-callgraph.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config
+	install -m 644 config/suspend.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config
+	install -m 644 config/suspend-dev.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config
+	install -m 644 config/suspend-x2-proc.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config
 
-	ln -s $(DESTDIR)$(PREFIX)/lib/pm-graph/analyze_boot.py $(DESTDIR)$(PREFIX)/bin/bootgraph
+	install -d  $(DESTDIR)$(PREFIX)/bin
-	ln -s $(DESTDIR)$(PREFIX)/lib/pm-graph/analyze_suspend.py $(DESTDIR)$(PREFIX)/bin/sleepgraph
+	ln -s $(DESTDIR)$(PREFIX)/lib/pm-graph/bootgraph.py $(DESTDIR)$(PREFIX)/bin/bootgraph
+	ln -s $(DESTDIR)$(PREFIX)/lib/pm-graph/sleepgraph.py $(DESTDIR)$(PREFIX)/bin/sleepgraph
 
 	install -d  $(DESTDIR)$(PREFIX)/share/man/man8
 	install bootgraph.8 $(DESTDIR)$(PREFIX)/share/man/man8
@@ -24,9 +37,11 @@ uninstall :
 	rm -f $(DESTDIR)$(PREFIX)/bin/bootgraph
 	rm -f $(DESTDIR)$(PREFIX)/bin/sleepgraph
 
-	rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/analyze_boot.py
+	rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/config/*
-	rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/analyze_suspend.py
+	if [ -d $(DESTDIR)$(PREFIX)/lib/pm-graph/config ] ; then \
-	rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/*.pyc
+		rmdir $(DESTDIR)$(PREFIX)/lib/pm-graph/config; \
+	fi;
+	rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/*
 	if [ -d $(DESTDIR)$(PREFIX)/lib/pm-graph ] ; then \
 		rmdir $(DESTDIR)$(PREFIX)/lib/pm-graph; \
 	fi;

tools/power/pm-graph/bootgraph.8

@@ -37,6 +37,9 @@ Print the current tool version
 Add the dmesg log to the html output. It will be viewable by
 clicking a button in the timeline.
 .TP
+\fB-result \fIfile\fR
+Export a results table to a text file for parsing.
+.TP
 \fB-o \fIname\fR
 Overrides the output subdirectory name when running a new test.
 Use {date}, {time}, {hostname} for current values.
@@ -44,14 +47,14 @@ Use {date}, {time}, {hostname} for current values.
 e.g. boot-{hostname}-{date}-{time}
 .SS "advanced"
 .TP
-\fB-f\fR
+\fB-f or -callgraph\fR
-Use ftrace to add function detail (default: disabled)
-.TP
-\fB-callgraph\fR
 Use ftrace to create initcall callgraphs (default: disabled). If -func
 is not used there will be one callgraph per initcall. This can produce
 very large outputs, i.e. 10MB - 100MB.
 .TP
+\fB-fstat\fR
+Use ftrace to add function detail (default: disabled)
+.TP
 \fB-maxdepth \fIlevel\fR
 limit the callgraph trace depth to \fIlevel\fR (default: 2). This is
 the best way to limit the output size when using -callgraph.
@@ -67,6 +70,13 @@ Reduce callgraph output in the timeline by limiting it to a list of calls. The
 argument can be a single function name or a comma delimited list.
 (default: none)
 .TP
+\fB-cgskip \fIfile\fR
+Reduce callgraph output in the timeline by skipping over uninteresting
+functions in the trace, e.g. printk or console_unlock. The functions listed
+in this file will show up as empty leaves in the callgraph with only the start/end
+times displayed.
+(default: none)
+.TP
 \fB-timeprec \fIn\fR
 Number of significant digits in timestamps (0:S, 3:ms, [6:us])
 .TP

tools/power/pm-graph/bootgraph.py

@@ -32,7 +32,7 @@ import platform
 import shutil
 from datetime import datetime, timedelta
 from subprocess import call, Popen, PIPE
-import analyze_suspend as aslib
+import sleepgraph as aslib
 
 # ----------------- CLASSES --------------------
 
@@ -42,23 +42,18 @@ import analyze_suspend as aslib
 #	 store system values and test parameters
 class SystemValues(aslib.SystemValues):
 	title = 'BootGraph'
-	version = '2.1'
+	version = '2.2'
 	hostname = 'localhost'
 	testtime = ''
 	kernel = ''
 	dmesgfile = ''
 	ftracefile = ''
 	htmlfile = 'bootgraph.html'
-	outfile = ''
 	testdir = ''
-	testdirprefix = 'boot'
+	kparams = ''
-	embedded = False
+	result = ''
-	testlog = False
-	dmesglog = False
-	ftracelog = False
 	useftrace = False
 	usecallgraph = False
-	usedevsrc = True
 	suspendmode = 'boot'
 	max_graph_depth = 2
 	graph_filter = 'do_one_initcall'
@@ -69,11 +64,6 @@ class SystemValues(aslib.SystemValues):
 	bootloader = 'grub'
 	blexec = []
 	def __init__(self):
-		if('LOG_FILE' in os.environ and 'TEST_RESULTS_IDENTIFIER' in os.environ):
-			self.embedded = True
-			self.dmesglog = True
-			self.outfile = os.environ['LOG_FILE']
-			self.htmlfile = os.environ['LOG_FILE']
 		self.hostname = platform.node()
 		self.testtime = datetime.now().strftime('%Y-%m-%d_%H:%M:%S')
 		if os.path.exists('/proc/version'):
@@ -148,11 +138,18 @@ class SystemValues(aslib.SystemValues):
 		cmdline = '%s -cronjob' % os.path.abspath(sys.argv[0])
 		args = iter(sys.argv[1:])
 		for arg in args:
-			if arg in ['-h', '-v', '-cronjob', '-reboot']:
+			if arg in ['-h', '-v', '-cronjob', '-reboot', '-verbose']:
 				continue
 			elif arg in ['-o', '-dmesg', '-ftrace', '-func']:
 				args.next()
 				continue
+			elif arg == '-result':
+				cmdline += ' %s "%s"' % (arg, os.path.abspath(args.next()))
+				continue
+			elif arg == '-cgskip':
+				file = self.configFile(args.next())
+				cmdline += ' %s "%s"' % (arg, os.path.abspath(file))
+				continue
 			cmdline += ' '+arg
 		if self.graph_filter != 'do_one_initcall':
 			cmdline += ' -func "%s"' % self.graph_filter
@@ -166,14 +163,6 @@ class SystemValues(aslib.SystemValues):
 		print '3. After reboot, re-run this tool with the same arguments but no command (w/o -reboot or -manual).\n'
 		print 'CMDLINE="%s"' % cmdline
 		sys.exit()
-	def getExec(self, cmd):
-		dirlist = ['/sbin', '/bin', '/usr/sbin', '/usr/bin',
-			'/usr/local/sbin', '/usr/local/bin']
-		for path in dirlist:
-			cmdfull = os.path.join(path, cmd)
-			if os.path.exists(cmdfull):
-				return cmdfull
-		return ''
 	def blGrub(self):
 		blcmd = ''
 		for cmd in ['update-grub', 'grub-mkconfig', 'grub2-mkconfig']:
@@ -199,6 +188,14 @@ class SystemValues(aslib.SystemValues):
 			self.blGrub()
 		else:
 			doError('unknown boot loader: %s' % self.bootloader)
+	def writeDatafileHeader(self, filename):
+		self.kparams = open('/proc/cmdline', 'r').read().strip()
+		fp = open(filename, 'w')
+		fp.write(self.teststamp+'\n')
+		fp.write(self.sysstamp+'\n')
+		fp.write('# command | %s\n' % self.cmdline)
+		fp.write('# kparams | %s\n' % self.kparams)
+		fp.close()
 
 sysvals = SystemValues()
 
@@ -249,7 +246,7 @@ class Data(aslib.Data):
 		return name
 	def deviceMatch(self, pid, cg):
 		if cg.end - cg.start == 0:
-			return True
+			return ''
 		for p in data.phases:
 			list = self.dmesg[p]['list']
 			for devname in list:
@@ -260,14 +257,25 @@ class Data(aslib.Data):
 					if(cg.start <= dev['start'] and cg.end >= dev['end'] and dev['length'] > 0):
 						dev['ftrace'] = cg
 						self.do_one_initcall = True
-						return True
+						return devname
 				else:
 					if(cg.start > dev['start'] and cg.end < dev['end']):
 						if 'ftraces' not in dev:
 							dev['ftraces'] = []
 						dev['ftraces'].append(cg)
-						return True
+						return devname
-		return False
+		return ''
+	def printDetails(self):
+		sysvals.vprint('Timeline Details:')
+		sysvals.vprint('          Host: %s' % sysvals.hostname)
+		sysvals.vprint('        Kernel: %s' % sysvals.kernel)
+		sysvals.vprint('     Test time: %s' % sysvals.testtime)
+		sysvals.vprint('     Boot time: %s' % self.boottime)
+		for phase in self.phases:
+			dc = len(self.dmesg[phase]['list'])
+			sysvals.vprint('%9s mode: %.3f - %.3f (%d initcalls)' % (phase,
+				self.dmesg[phase]['start']*1000,
+				self.dmesg[phase]['end']*1000, dc))
 
 # ----------------- FUNCTIONS --------------------
 
@@ -275,6 +283,8 @@ class Data(aslib.Data):
 # Description:
 #	 parse a kernel log for boot data
 def parseKernelLog():
+	sysvals.vprint('Analyzing the dmesg data (%s)...' % \
+		os.path.basename(sysvals.dmesgfile))
 	phase = 'kernel'
 	data = Data(0)
 	data.dmesg['kernel']['start'] = data.start = ktime = 0.0
@@ -298,6 +308,12 @@ def parseKernelLog():
 		elif re.match(tp.sysinfofmt, line):
 			tp.sysinfo = line
 			continue
+		elif re.match(tp.cmdlinefmt, line):
+			tp.cmdline = line
+			continue
+		elif re.match(tp.kparamsfmt, line):
+			tp.kparams = line
+			continue
 		idx = line.find('[')
 		if idx > 1:
 			line = line[idx:]
@@ -353,6 +369,17 @@ def parseKernelLog():
 # Description:
 #	 Check if trace is available and copy to a temp file
 def parseTraceLog(data):
+	sysvals.vprint('Analyzing the ftrace data (%s)...' % \
+		os.path.basename(sysvals.ftracefile))
+	# if available, calculate cgfilter allowable ranges
+	cgfilter = []
+	if len(sysvals.cgfilter) > 0:
+		for p in data.phases:
+			list = data.dmesg[p]['list']
+			for i in sysvals.cgfilter:
+				if i in list:
+					cgfilter.append([list[i]['start']-0.0001,
+						list[i]['end']+0.0001])
 	# parse the trace log
 	ftemp = dict()
 	tp = aslib.TestProps()
@@ -366,7 +393,16 @@ def parseTraceLog(data):
 			continue
 		m_time, m_proc, m_pid, m_msg, m_dur = \
 			m.group('time', 'proc', 'pid', 'msg', 'dur')
-		if float(m_time) > data.end:
+		t = float(m_time)
+		if len(cgfilter) > 0:
+			allow = False
+			for r in cgfilter:
+				if t >= r[0] and t < r[1]:
+					allow = True
+					break
+			if not allow:
+				continue
+		if t > data.end:
 			break
 		if(m_time and m_pid and m_msg):
 			t = aslib.FTraceLine(m_time, m_msg, m_dur)
@@ -378,24 +414,36 @@ def parseTraceLog(data):
 		key = (m_proc, pid)
 		if(key not in ftemp):
 			ftemp[key] = []
-			ftemp[key].append(aslib.FTraceCallGraph(pid))
+			ftemp[key].append(aslib.FTraceCallGraph(pid, sysvals))
 		cg = ftemp[key][-1]
-		if(cg.addLine(t)):
+		res = cg.addLine(t)
-			ftemp[key].append(aslib.FTraceCallGraph(pid))
+		if(res != 0):
+			ftemp[key].append(aslib.FTraceCallGraph(pid, sysvals))
+		if(res == -1):
+			ftemp[key][-1].addLine(t)
+
 	tf.close()
 
 	# add the callgraph data to the device hierarchy
 	for key in ftemp:
 		proc, pid = key
 		for cg in ftemp[key]:
-			if len(cg.list) < 1 or cg.invalid:
+			if len(cg.list) < 1 or cg.invalid or (cg.end - cg.start == 0):
 				continue
 			if(not cg.postProcess()):
 				print('Sanity check failed for %s-%d' % (proc, pid))
 				continue
 			# match cg data to devices
-			if not data.deviceMatch(pid, cg):
+			devname = data.deviceMatch(pid, cg)
-				print ' BAD: %s %s-%d [%f - %f]' % (cg.name, proc, pid, cg.start, cg.end)
+			if not devname:
+				kind = 'Orphan'
+				if cg.partial:
+					kind = 'Partial'
+				sysvals.vprint('%s callgraph found for %s %s-%d [%f - %f]' %\
+					(kind, cg.name, proc, pid, cg.start, cg.end))
+			elif len(cg.list) > 1000000:
+				print 'WARNING: the callgraph found for %s is massive! (%d lines)' %\
+					(devname, len(cg.list))
 
 # Function: retrieveLogs
 # Description:
@@ -473,7 +521,7 @@ def createBootGraph(data):
 	devtl = aslib.Timeline(100, 20)
 
 	# write the test title and general info header
-	devtl.createHeader(sysvals)
+	devtl.createHeader(sysvals, sysvals.stamp)
 
 	# Generate the header for this timeline
 	t0 = data.start
@@ -574,12 +622,9 @@ def createBootGraph(data):
 			data.dmesg[phase]['color'], phase+'_mode', phase[0])
 	devtl.html += '</div>\n'
 
-	if(sysvals.outfile == sysvals.htmlfile):
+	hf = open(sysvals.htmlfile, 'w')
-		hf = open(sysvals.htmlfile, 'a')
-	else:
-		hf = open(sysvals.htmlfile, 'w')
 
-	# add the css if this is not an embedded run
+	# add the css
 	extra = '\
 		.c1 {background:rgba(209,0,0,0.4);}\n\
 		.c2 {background:rgba(255,102,34,0.4);}\n\
@@ -597,8 +642,7 @@ def createBootGraph(data):
 		.fstat td {text-align:left;width:35px;}\n\
 		.srccall {position:absolute;font-size:10px;z-index:7;overflow:hidden;color:black;text-align:center;white-space:nowrap;border-radius:5px;border:1px solid black;background:linear-gradient(to bottom right,#CCC,#969696);}\n\
 		.srccall:hover {color:white;font-weight:bold;border:1px solid white;}\n'
-	if(not sysvals.embedded):
+	aslib.addCSS(hf, sysvals, 1, False, extra)
-		aslib.addCSS(hf, sysvals, 1, False, extra)
 
 	# write the device timeline
 	hf.write(devtl.html)
@@ -631,6 +675,9 @@ def createBootGraph(data):
 	if(sysvals.usecallgraph):
 		aslib.addCallgraphs(sysvals, hf, data)
 
+	# add the test log as a hidden div
+	if sysvals.testlog and sysvals.logmsg:
+		hf.write('<div id="testlog" style="display:none;">\n'+sysvals.logmsg+'</div>\n')
 	# add the dmesg log as a hidden div
 	if sysvals.dmesglog:
 		hf.write('<div id="dmesglog" style="display:none;">\n')
@@ -639,14 +686,9 @@ def createBootGraph(data):
 			hf.write(line)
 		hf.write('</div>\n')
 
-	if(not sysvals.embedded):
+	# write the footer and close
-		# write the footer and close
+	aslib.addScriptCode(hf, [data])
-		aslib.addScriptCode(hf, [data])
+	hf.write('</body>\n</html>\n')
-		hf.write('</body>\n</html>\n')
-	else:
-		# embedded out will be loaded in a page, skip the js
-		hf.write('<div id=bounds style=display:none>%f,%f</div>' % \
-			(data.start*1000, data.end*1000))
 	hf.close()
 	return True
 
@@ -780,6 +822,7 @@ def doError(msg, help=False):
 	if help == True:
 		printHelp()
 	print 'ERROR: %s\n' % msg
+	sysvals.outputResult({'error':msg})
 	sys.exit()
 
 # Function: printHelp
@@ -806,18 +849,21 @@ def printHelp():
 	print('Options:')
 	print('  -h            Print this help text')
 	print('  -v            Print the current tool version')
+	print('  -verbose      Print extra information during execution and analysis')
 	print('  -addlogs      Add the dmesg log to the html output')
+	print('  -result fn    Export a results table to a text file for parsing.')
 	print('  -o name       Overrides the output subdirectory name when running a new test')
 	print('                default: boot-{date}-{time}')
 	print(' [advanced]')
-	print('  -f            Use ftrace to add function detail (default: disabled)')
+	print('  -fstat        Use ftrace to add function detail and statistics (default: disabled)')
-	print('  -callgraph    Add callgraph detail, can be very large (default: disabled)')
+	print('  -f/-callgraph Add callgraph detail, can be very large (default: disabled)')
 	print('  -maxdepth N   limit the callgraph data to N call levels (default: 2)')
 	print('  -mincg ms     Discard all callgraphs shorter than ms milliseconds (e.g. 0.001 for us)')
 	print('  -timeprec N   Number of significant digits in timestamps (0:S, 3:ms, [6:us])')
 	print('  -expandcg     pre-expand the callgraph data in the html output (default: disabled)')
 	print('  -func list    Limit ftrace to comma-delimited list of functions (default: do_one_initcall)')
 	print('  -cgfilter S   Filter the callgraph output in the timeline')
+	print('  -cgskip file  Callgraph functions to skip, off to disable (default: cgskip.txt)')
 	print('  -bl name      Use the following boot loader for kernel params (default: grub)')
 	print('  -reboot       Reboot the machine automatically and generate a new timeline')
 	print('  -manual       Show the steps to generate a new timeline manually (used with -reboot)')
@@ -837,8 +883,13 @@ if __name__ == '__main__':
 	# loop through the command line arguments
 	cmd = ''
 	testrun = True
+	switchoff = ['disable', 'off', 'false', '0']
 	simplecmds = ['-sysinfo', '-kpupdate', '-flistall', '-checkbl']
+	cgskip = ''
+	if '-f' in sys.argv:
+		cgskip = sysvals.configFile('cgskip.txt')
 	args = iter(sys.argv[1:])
+	mdset = False
 	for arg in args:
 		if(arg == '-h'):
 			printHelp()
@@ -846,13 +897,17 @@ if __name__ == '__main__':
 		elif(arg == '-v'):
 			print("Version %s" % sysvals.version)
 			sys.exit()
+		elif(arg == '-verbose'):
+			sysvals.verbose = True
 		elif(arg in simplecmds):
 			cmd = arg[1:]
-		elif(arg == '-f'):
+		elif(arg == '-fstat'):
 			sysvals.useftrace = True
-		elif(arg == '-callgraph'):
+		elif(arg == '-callgraph' or arg == '-f'):
 			sysvals.useftrace = True
 			sysvals.usecallgraph = True
+		elif(arg == '-cgdump'):
+			sysvals.cgdump = True
 		elif(arg == '-mincg'):
 			sysvals.mincglen = aslib.getArgFloat('-mincg', args, 0.0, 10000.0)
 		elif(arg == '-cgfilter'):
@@ -860,7 +915,18 @@ if __name__ == '__main__':
 				val = args.next()
 			except:
 				doError('No callgraph functions supplied', True)
-			sysvals.setDeviceFilter(val)
+			sysvals.setCallgraphFilter(val)
+		elif(arg == '-cgskip'):
+			try:
+				val = args.next()
+			except:
+				doError('No file supplied', True)
+			if val.lower() in switchoff:
+				cgskip = ''
+			else:
+				cgskip = sysvals.configFile(val)
+				if(not cgskip):
+					doError('%s does not exist' % cgskip)
 		elif(arg == '-bl'):
 			try:
 				val = args.next()
@@ -872,6 +938,7 @@ if __name__ == '__main__':
 		elif(arg == '-timeprec'):
 			sysvals.setPrecision(aslib.getArgInt('-timeprec', args, 0, 6))
 		elif(arg == '-maxdepth'):
+			mdset = True
 			sysvals.max_graph_depth = aslib.getArgInt('-maxdepth', args, 0, 1000)
 		elif(arg == '-func'):
 			try:
@@ -902,8 +969,6 @@ if __name__ == '__main__':
 				doError('No dmesg file supplied', True)
 			if(os.path.exists(val) == False):
 				doError('%s does not exist' % val)
-			if(sysvals.htmlfile == val or sysvals.outfile == val):
-				doError('Output filename collision')
 			testrun = False
 			sysvals.dmesgfile = val
 		elif(arg == '-o'):
@@ -912,6 +977,12 @@ if __name__ == '__main__':
 			except:
 				doError('No subdirectory name supplied', True)
 			sysvals.testdir = sysvals.setOutputFolder(val)
+		elif(arg == '-result'):
+			try:
+				val = args.next()
+			except:
+				doError('No result file supplied', True)
+			sysvals.result = val
 		elif(arg == '-reboot'):
 			sysvals.reboot = True
 		elif(arg == '-manual'):
@@ -947,7 +1018,7 @@ if __name__ == '__main__':
 			sysvals.getBootLoader()
 			print 'Boot Loader: %s\n%s' % (sysvals.bootloader, sysvals.blexec)
 		elif(cmd == 'sysinfo'):
-			sysvals.printSystemInfo()
+			sysvals.printSystemInfo(True)
 		sys.exit()
 
 	# reboot: update grub, setup a cronjob, and reboot
@@ -963,6 +1034,10 @@ if __name__ == '__main__':
 			sysvals.manualRebootRequired()
 		sys.exit()
 
+	if sysvals.usecallgraph and cgskip:
+		sysvals.vprint('Using cgskip file: %s' % cgskip)
+		sysvals.setCallgraphBlacklist(cgskip)
+
 	# cronjob: remove the cronjob, grub changes, and disable ftrace
 	if sysvals.iscronjob:
 		updateCron(True)
@@ -980,29 +1055,23 @@ if __name__ == '__main__':
 
 	# process the log data
 	if sysvals.dmesgfile:
+		if not mdset:
+			sysvals.max_graph_depth = 0
 		data = parseKernelLog()
 		if(not data.valid):
 			doError('No initcall data found in %s' % sysvals.dmesgfile)
 		if sysvals.useftrace and sysvals.ftracefile:
 			parseTraceLog(data)
+		if sysvals.cgdump:
+			data.debugPrint()
+			sys.exit()
 	else:
 		doError('dmesg file required')
 
-	print('          Host: %s' % sysvals.hostname)
+	sysvals.vprint('Creating the html timeline (%s)...' % sysvals.htmlfile)
-	print('     Test time: %s' % sysvals.testtime)
+	sysvals.vprint('Command:\n    %s' % sysvals.cmdline)
-	print('     Boot time: %s' % data.boottime)
+	sysvals.vprint('Kernel parameters:\n    %s' % sysvals.kparams)
-	print('Kernel Version: %s' % sysvals.kernel)
+	data.printDetails()
-	print('  Kernel start: %.3f' % (data.start * 1000))
-	print('Usermode start: %.3f' % (data.tUserMode * 1000))
-	print('Last Init Call: %.3f' % (data.end * 1000))
-
-	# handle embedded output logs
-	if(sysvals.outfile and sysvals.embedded):
-		fp = open(sysvals.outfile, 'w')
-		fp.write('pass %s initstart %.3f end %.3f boot %s\n' %
-			(data.valid, data.tUserMode*1000, data.end*1000, data.boottime))
-		fp.close()
-
 	createBootGraph(data)
 
 	# if running as root, change output dir owner to sudo_user
@@ -1010,3 +1079,7 @@ if __name__ == '__main__':
 		os.getuid() == 0 and 'SUDO_USER' in os.environ:
 		cmd = 'chown -R {0}:{0} {1} > /dev/null 2>&1'
 		call(cmd.format(os.environ['SUDO_USER'], sysvals.testdir), shell=True)
+
+	sysvals.stamp['boot'] = (data.tUserMode - data.start) * 1000
+	sysvals.stamp['lastinit'] = data.end * 1000
+	sysvals.outputResult(sysvals.stamp)

tools/power/pm-graph/config/cgskip.txt

@@ -0,0 +1,65 @@
+# -----------------------------------------------
+# CallGraph function skip list
+#
+# This file contains a list of functions which are
+# meant to be skipped in the callgraph trace. It reduces
+# the callgraph html file size by treating these functions
+# as leaves with no child calls. It can be editted by
+# adding or removing function symbol names.
+#
+# The sleepgraph tool automatically pulls this file in when
+# it is found in the config folder. It can be ignored if
+# the tool is called with "-cgskip off".
+# -----------------------------------------------
+
+# low level scheduling and timing
+up
+down_timeout
+mutex_lock
+down_read
+complete_all
+schedule_timeout
+wake_up_process
+msleep
+__udelay
+ktime_get
+
+# console calls
+printk
+dev_printk
+console_unlock
+
+# memory handling
+__kmalloc
+__kmalloc_track_caller
+kmem_cache_alloc
+kmem_cache_alloc_trace
+kmem_cache_free
+kstrdup
+kstrdup_const
+kmalloc_slab
+new_slab
+__slab_alloc
+__slab_free
+raw_pci_read
+pci_read
+alloc_pages_current
+
+# debugfs and sysfs setup
+debugfs_remove_recursive
+debugfs_create_dir
+debugfs_create_files
+debugfs_create_dir
+debugfs_get_inode
+sysfs_add_file_mode_ns
+sysfs_add_file
+sysfs_create_dir_ns
+sysfs_create_link
+sysfs_create_group
+sysfs_create_groups
+sysfs_create_bin_file
+dpm_sysfs_add
+sysfs_create_file_ns
+sysfs_merge_group
+sysfs_add_link_to_group
+sysfs_create_link_sd

tools/power/pm-graph/config/custom-timeline-functions.cfg

@@ -0,0 +1,205 @@
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config thisfile.txt
+#
+
+[Settings]
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: mem
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: true
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 1
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: suspend-{hostname}-{date}-{time}-custom
+
+# Override default timeline entries
+# Do not use the internal default functions for timeline entries (default: false)
+# Set this to true if you intend to only use the ones defined in this config
+override-timeline-functions: true
+
+# Override default dev timeline entries
+# Do not use the internal default functions for dev timeline entries (default: false)
+# Set this to true if you intend to only use the ones defined in this config
+override-dev-timeline-functions: true
+
+[timeline_functions_x86_64]
+#
+# Function calls to display in the timeline alongside device callbacks.
+# The tool has an internal set of these functions which should cover the
+# whole of kernel execution, but you can append or override here.
+#
+# This is a list of kprobes which use both symbol data and function arg data.
+# The function calls are displayed on the timeline alongside the device blocks.
+# The args are pulled directly from the stack using this architecture's registers
+# and stack formatting. Three pieces of info are required. The function name,
+# a format string, and an argument list
+#
+# Entry format:
+#
+#   function: format{fn_arg1}_{fn_arg2} fn_arg1 fn_arg2 ... [color=purple]
+#
+# Required Arguments:
+#
+#   function: The symbol name for the function you want probed, this is the
+#             minimum required for an entry, it will show up as the function
+#             name with no arguments.
+#
+#       example: _cpu_up:
+#
+# Optional Arguments:
+#
+#   format: The format to display the data on the timeline in. Use braces to
+#           enclose the arg names.
+#
+#       example: CPU_ON[{cpu}]
+#
+#   color: The color of the entry block in the timeline. The default color is
+#          transparent, so the entry shares the phase color. The color is an
+#          html color string, either a word, or an RGB.
+#
+#       example: [color=#CC00CC]
+#
+#   arglist: A list of arguments from registers/stack addresses. See URL:
+#            https://www.kernel.org/doc/Documentation/trace/kprobetrace.txt
+#
+#       example: cpu=%di:s32
+#
+# Example: Display cpu resume in the timeline
+#
+#       _cpu_up: CPU_ON[{cpu}] cpu=%di:s32 [color=orange]
+#
+_cpu_down: CPU_OFF[{cpu}] cpu=%di:s32
+_cpu_up: CPU_ON[{cpu}] cpu=%di:s32
+sys_sync:
+pm_prepare_console:
+pm_notifier_call_chain:
+freeze_processes:
+freeze_kernel_threads:
+pm_restrict_gfp_mask:
+acpi_suspend_begin:
+suspend_console:
+acpi_pm_prepare:
+syscore_suspend:
+arch_enable_nonboot_cpus_end:
+syscore_resume:
+acpi_pm_finish:
+resume_console:
+acpi_pm_end:
+pm_restore_gfp_mask:
+thaw_processes:
+pm_restore_console:
+
+[dev_timeline_functions_x86_64]
+#
+# Dev mode function calls to display inside timeline entries
+#
+# This is a list of kprobes which use both symbol data and function arg data.
+# The function calls are displayed on the timeline alongside the device blocks.
+# The args are pulled directly from the stack using this architecture's registers
+# and stack formatting. Three pieces of info are required. The function name,
+# a format string, and an argument list
+#
+# Entry format:
+#
+#   function: format{fn_arg1}_{fn_arg2} fn_arg1 fn_arg2 ... [color=purple]
+#
+# Required Arguments:
+#
+#   function: The symbol name for the function you want probed, this is the
+#             minimum required for an entry, it will show up as the function
+#             name with no arguments.
+#
+#       example: ata_eh_recover:
+#
+# Optional Arguments:
+#
+#   format: The format to display the data on the timeline in. Use braces to
+#           enclose the arg names.
+#
+#       example: ata{port}_port_reset
+# 
+#   color: The color of the entry block in the timeline. The default color is
+#          transparent, so the entry shares the phase color. The color is an
+#          html color string, either a word, or an RGB.
+#
+#       example: [color=#CC00CC]
+#
+#   arglist: A list of arguments from registers/stack addresses. See URL:
+#            https://www.kernel.org/doc/Documentation/trace/kprobetrace.txt
+#
+#       example: port=+36(%di):s32
+#
+# Example: Display ATA port reset as ataN_port_reset in the timeline
+#
+#       ata_eh_recover: ata{port}_port_reset port=+36(%di):s32
+#
+msleep: msleep time=%di:s32
+schedule_timeout_uninterruptible: schedule_timeout_uninterruptible timeout=%di:s32
+schedule_timeout: schedule_timeout timeout=%di:s32
+usleep_range: usleep_range min=%di:s32 max=%si:s32
+__const_udelay: udelay loops=%di:s32
+__mutex_lock_slowpath: mutex_lock_slowpath
+ata_eh_recover: ata_eh_recover port=+36(%di):s32
+acpi_os_stall:
+acpi_resume_power_resources:
+acpi_ps_parse_aml:
+ext4_sync_fs:
+i915_gem_resume:
+i915_restore_state:
+intel_opregion_setup:
+g4x_pre_enable_dp:
+vlv_pre_enable_dp:
+chv_pre_enable_dp:
+g4x_enable_dp:
+vlv_enable_dp:
+intel_hpd_init:
+intel_opregion_register:
+intel_dp_detect:
+intel_hdmi_detect:
+intel_opregion_init:
+intel_fbdev_set_suspend:

tools/power/pm-graph/config/example.cfg

@@ -0,0 +1,133 @@
+#
+# Generic S3 (Suspend to Mem) test
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/example.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: mem
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: suspend-{hostname}-{date}-{time}
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: true
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# Skip HTML generation
+# Only capture the logs, don't generate the html timeline (default: false)
+skiphtml: false
+
+# Sync filesystem before suspend
+# run sync before the test, minimizes sys_sync call time (default: false)
+sync: true
+
+# Runtime suspend enable/disable
+# Enable/disable runtime suspend for all devices, restore all after test (default: no-action)
+# rs: disable
+
+# Turn display on/off for test
+# Switch the display on/off for the test using xset (default: no-action)
+# display: on
+
+# Print results to text file
+# Print the status of the test run in the given file (default: no-action)
+result: result.txt
+
+# Gzip the log files to save space
+# Gzip the generated log files, and read gzipped log files (default: false)
+gzip: true
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of suspend (default: "")
+# command: echo mem > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Multiple test runs
+# Run N tests D seconds apart, generates separate outputs with a summary (default: false)
+# multi: 3 5
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back and display in the same timeline (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 0.001
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Callgraph phase filter
+# Only enable callgraphs for one phase, i.e. resume_noirq (default: all)
+cgphase: suspend
+
+# Callgraph x2 test filter
+# Only enable callgraphs test 0 or 1 when using -x2 (default: 1)
+cgtest: 0
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 6
+
+# Device Filter
+# show only devices whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb
+
+# Add kprobe functions to the timeline
+# Add functions to the timeline from a text file (default: no-action)
+# fadd: file.txt

tools/power/pm-graph/config/freeze-callgraph.cfg

@@ -0,0 +1,94 @@
+#
+# Full Callgraph for S2 (Freeze) test
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/freeze-callgraph.cfg
+#
+# NOTE: the output of this test is very large (> 30MB)
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: freeze
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: freeze-{hostname}-{date}-{time}-cg
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of freeze (default: "")
+# command: echo freeze > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 1
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: true
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 6
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb

tools/power/pm-graph/config/freeze-dev.cfg

@@ -0,0 +1,93 @@
+#
+# Dev S2 (Freeze) test - includes src calls / kernel threads
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/freeze-dev.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: freeze
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: freeze-{hostname}-{date}-{time}-dev
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of freeze (default: "")
+# command: echo freeze > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: true
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 1
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 3
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb

tools/power/pm-graph/config/freeze.cfg

@@ -0,0 +1,93 @@
+#
+# Generic S2 (Freeze) test
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/freeze.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: freeze
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: freeze-{hostname}-{date}-{time}
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of freeze (default: "")
+# command: echo freeze > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 0.001
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 3
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb

tools/power/pm-graph/config/standby-callgraph.cfg

@@ -0,0 +1,94 @@
+#
+# Full Callgraph for S1 (Standby) test
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/standby-callgraph.cfg
+#
+# NOTE: the output of this test is very large (> 30MB)
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: standby
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: standby-{hostname}-{date}-{time}-cg
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of standby (default: "")
+# command: echo standby > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 1
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: true
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 6
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb

tools/power/pm-graph/config/standby-dev.cfg

@@ -0,0 +1,93 @@
+#
+# Dev S1 (Standby) test - includes src calls / kernel threads
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/standby-dev.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: standby
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: standby-{hostname}-{date}-{time}-dev
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of standby (default: "")
+# command: echo standby > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: true
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 1
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 3
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb

tools/power/pm-graph/config/standby.cfg

@@ -0,0 +1,93 @@
+#
+# Generic S1 (Standby) test
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/standby.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: standby
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: standby-{hostname}-{date}-{time}
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of standby (default: "")
+# command: echo standby > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 0.001
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 3
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb

tools/power/pm-graph/config/suspend-callgraph.cfg

@@ -0,0 +1,98 @@
+#
+# Full Callgraph for S3 (Suspend to Mem) test
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/suspend.cfg
+#
+# NOTE: the output of this test is very large (> 30MB)
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: mem
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: suspend-{hostname}-{date}-{time}-cg
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of suspend (default: "")
+# command: echo mem > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 0.001
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: true
+
+# Max graph depth
+# limit the callgraph trace to this depth (default: 0 = all)
+maxdepth: 5
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 6
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb

tools/power/pm-graph/config/suspend-dev.cfg

@@ -0,0 +1,93 @@
+#
+# Dev S3 (Suspend to Mem) test - includes src calls / kernel threads
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/suspend-dev.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: mem
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: suspend-{hostname}-{date}-{time}-dev
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of suspend (default: "")
+# command: echo mem > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: true
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 1
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 3
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb

tools/power/pm-graph/config/suspend-x2-proc.cfg

@@ -0,0 +1,93 @@
+#
+# Proc S3 (Suspend to Mem) x2 test - includes user processes
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/suspend-proc.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: mem
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: suspend-{hostname}-{date}-{time}-x2-proc
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of suspend (default: "")
+# command: echo mem > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: true
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: true
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 1000
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 1000
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 1000
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 1
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 3
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb

tools/power/pm-graph/config/suspend.cfg

@@ -0,0 +1,93 @@
+#
+# Generic S3 (Suspend to Mem) test
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/suspend.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: mem
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: suspend-{hostname}-{date}-{time}
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of suspend (default: "")
+# command: echo mem > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 0.001
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 3
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb

tools/power/pm-graph/sleepgraph.8

@@ -52,9 +52,32 @@ disable rtcwake and require a user keypress to resume.
 \fB-addlogs\fR
 Add the dmesg and ftrace logs to the html output. They will be viewable by
 clicking buttons in the timeline.
+.TP
+\fB-result \fIfile\fR
+Export a results table to a text file for parsing.
+.TP
+\fB-sync\fR
+Sync the filesystems before starting the test. This reduces the size of
+the sys_sync call which happens in the suspend_prepare phase.
+.TP
+\fB-rs \fIenable/disable\fR
+During test, enable/disable runtime suspend for all devices. The test is delayed
+by 5 seconds to allow runtime suspend changes to occur. The settings are restored
+after the test is complete.
+.TP
+\fB-display \fIon/off\fR
+Turn the display on or off for the test using the xset command. This helps
+maintain the consistecy of test data for better comparison.
+.TP
+\fB-skiphtml\fR
+Run the test and capture the trace logs, but skip the timeline generation.
 
 .SS "advanced"
 .TP
+\fB-gzip\fR
+Gzip the trace and dmesg logs to save space. The tool can also read in gzipped
+logs for processing.
+.TP
 \fB-cmd \fIstr\fR
 Run the timeline over a custom suspend command, e.g. pm-suspend. By default
 the tool forces suspend via /sys/power/state so this allows testing over
@@ -114,6 +137,18 @@ This reduces the html file size as there can be many tiny callgraphs
 which are barely visible in the timeline.
 The value is a float: e.g. 0.001 represents 1 us.
 .TP
+\fB-cgfilter \fI"func1,func2,..."\fR
+Reduce callgraph output in the timeline by limiting it to a list of calls. The
+argument can be a single function name or a comma delimited list.
+(default: none)
+.TP
+\fB-cgskip \fIfile\fR
+Reduce callgraph timeline size by skipping over uninteresting functions
+in the trace, e.g. printk or console_unlock. The functions listed
+in this file will show up as empty leaves in the callgraph with only the start/end
+times displayed. cgskip.txt is used automatically if found in the path, so
+use "off" to disable completely (default: cgskip.txt)
+.TP
 \fB-cgphase \fIp\fR
 Only show callgraph data for phase \fIp\fR (e.g. suspend_late).
 .TP
@@ -122,6 +157,9 @@ In an x2 run, only show callgraph data for test \fIn\fR (e.g. 0 or 1).
 .TP
 \fB-timeprec \fIn\fR
 Number of significant digits in timestamps (0:S, [3:ms], 6:us).
+.TP
+\fB-bufsize \fIN\fR
+Set trace buffer size to N kilo-bytes (default: all of free memory up to 3GB)
 
 .SH COMMANDS
 .TP
@@ -144,11 +182,8 @@ Print out the contents of the ACPI Firmware Performance Data Table.
 \fB-sysinfo\fR
 Print out system info extracted from BIOS. Reads /dev/mem directly instead of going through dmidecode.
 .TP
-\fB-usbtopo\fR
+\fB-devinfo\fR
-Print out the current USB topology with power info.
+Print out the pm settings of all devices which support runtime suspend.
-.TP
-\fB-usbauto\fR
-Enable autosuspend for all connected USB devices.
 .TP
 \fB-flist\fR
 Print the list of ftrace functions currently being captured. Functions
@@ -198,7 +233,7 @@ Execute a mem suspend with a 15 second wakeup. Include the logs in the html.
 .PP
 Execute a standby with a 15 second wakeup. Change the output folder name.
 .IP
-\f(CW$ sudo sleepgraph -m standby -rtcwake 15 -o "standby-{hostname}-{date}-{time}"\fR
+\f(CW$ sudo sleepgraph -m standby -rtcwake 15 -o "standby-{host}-{date}-{time}"\fR
 .PP
 Execute a freeze with no wakeup (require keypress). Change output folder name.
 .IP