First set of IIO fixes in the 5.6 cycle.

* adxl372
   - Fix marking of buffered values as big endian.
 * ak8974
   - Fix wrong handling of negative values when read from sysfs.
 * at91-sama5d2
   - Fix differential mode by ensuring configuration set correctly.
 * ping
   - Use the write sensor type for of_ping_match table.
 * sps30
   - Kconfig build dependency fix.
 * st-sensors
   - Fix a wrong identification of which part the SMO8840 ACPI ID indicates.
 * stm32-dsfdm
   - Fix a sleep in atomic issue by not using a trigger when it makes no sense.
 * stm32-timer
   - Make sure master mode is disabled when stopping.
 * vcnl400
   - Update some sampling periods based on new docs.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl5lHRwRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FohvfBAAnKMExW+zKhI1lyTnJQNQhed+0VfNMW7t
 23VsgNQ0jLpS9eX7+1ztHhO34wP92EcvUq5p4URwEFqtQC4Ofbrm/wcYunLkmkSJ
 +q1KG62jTUpQjj56iHb6OPfULEL5rdkbU+csDlrxPMk22PlWNwfCZ5mJmBJZnjDL
 Jlf1ihh/3HcxCE8TavihBiryrPlNE+0C1SHWhVz0M/rOaNxOBPCKU0Oi5jf+RvZT
 lpc9qhUmuM559yV4PzZQrUoJvz2OQirdzHvCtdvTM1/nbRtqoymqqQ7+6Jvhs/Wk
 tUea6E5PbVV/RWC80Ezid9Z+ejOdPfBjJbEzqBCdtS2rXAhNBDyXgYjuC5h6IvRR
 sdl15w6bi52uVcPWpYi016KuX7e8dPexNOS7AmxXB4V+VCORrHHlErTSJK+2O6BU
 7Eeb89Jq8Azp+/Ecv9WB606/gSkfHlv94t6a+eujhb0WRqvAR0RlsTMXQnVv4tEN
 T0R/Nv/kS7xgMCsRMKCeX5ZIMEsIrk0b48yk2iGWWvWzOLFiSjSmW82dcGQRW0kM
 qCIf9FmAIPD0+gCZxxTMrQd+nQ9X98ZbvLPBhLLjjBim/zksxQgknkvg73jGHdZY
 1McwlHrx/x1/5VUeScURA2vsTaU0yZSaSNATN3WBZqLGf8aP2GUe9cXJYb5EWoRC
 eZr607TuOp0=
 =uJ0W
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes in the 5.6 cycle.

* adxl372
  - Fix marking of buffered values as big endian.
* ak8974
  - Fix wrong handling of negative values when read from sysfs.
* at91-sama5d2
  - Fix differential mode by ensuring configuration set correctly.
* ping
  - Use the write sensor type for of_ping_match table.
* sps30
  - Kconfig build dependency fix.
* st-sensors
  - Fix a wrong identification of which part the SMO8840 ACPI ID indicates.
* stm32-dsfdm
  - Fix a sleep in atomic issue by not using a trigger when it makes no sense.
* stm32-timer
  - Make sure master mode is disabled when stopping.
* vcnl400
  - Update some sampling periods based on new docs.

* tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: ping: set pa_laser_ping_cfg in of_ping_match
  iio: chemical: sps30: fix missing triggered buffer dependency
  iio: st_sensors: remap SMO8840 to LIS2DH12
  iio: light: vcnl4000: update sampling periods for vcnl4040
  iio: light: vcnl4000: update sampling periods for vcnl4200
  iio: accel: adxl372: Set iio_chan BE
  iio: magnetometer: ak8974: Fix negative raw values in sysfs
  iio: trigger: stm32-timer: disable master mode when stopping
  iio: adc: stm32-dfsdm: fix sleep in atomic context
  iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
This commit is contained in:
Greg Kroah-Hartman 2020-03-18 11:20:42 +01:00
commit 14800df6a0
9 changed files with 48 additions and 45 deletions

View File

@ -237,6 +237,7 @@ static const struct adxl372_axis_lookup adxl372_axis_lookup_table[] = {
.realbits = 12, \
.storagebits = 16, \
.shift = 4, \
.endianness = IIO_BE, \
}, \
}

View File

@ -110,7 +110,7 @@ MODULE_DEVICE_TABLE(of, st_accel_of_match);
#ifdef CONFIG_ACPI
static const struct acpi_device_id st_accel_acpi_match[] = {
{"SMO8840", (kernel_ulong_t)LNG2DM_ACCEL_DEV_NAME},
{"SMO8840", (kernel_ulong_t)LIS2DH12_ACCEL_DEV_NAME},
{"SMO8A90", (kernel_ulong_t)LNG2DM_ACCEL_DEV_NAME},
{ },
};

View File

@ -723,6 +723,7 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
for_each_set_bit(bit, indio->active_scan_mask, indio->num_channels) {
struct iio_chan_spec const *chan = at91_adc_chan_get(indio, bit);
u32 cor;
if (!chan)
continue;
@ -731,6 +732,20 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
chan->type == IIO_PRESSURE)
continue;
if (state) {
cor = at91_adc_readl(st, AT91_SAMA5D2_COR);
if (chan->differential)
cor |= (BIT(chan->channel) |
BIT(chan->channel2)) <<
AT91_SAMA5D2_COR_DIFF_OFFSET;
else
cor &= ~(BIT(chan->channel) <<
AT91_SAMA5D2_COR_DIFF_OFFSET);
at91_adc_writel(st, AT91_SAMA5D2_COR, cor);
}
if (state) {
at91_adc_writel(st, AT91_SAMA5D2_CHER,
BIT(chan->channel));

View File

@ -842,31 +842,6 @@ static inline void stm32_dfsdm_process_data(struct stm32_dfsdm_adc *adc,
}
}
static irqreturn_t stm32_dfsdm_adc_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
int available = stm32_dfsdm_adc_dma_residue(adc);
while (available >= indio_dev->scan_bytes) {
s32 *buffer = (s32 *)&adc->rx_buf[adc->bufi];
stm32_dfsdm_process_data(adc, buffer);
iio_push_to_buffers_with_timestamp(indio_dev, buffer,
pf->timestamp);
available -= indio_dev->scan_bytes;
adc->bufi += indio_dev->scan_bytes;
if (adc->bufi >= adc->buf_sz)
adc->bufi = 0;
}
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static void stm32_dfsdm_dma_buffer_done(void *data)
{
struct iio_dev *indio_dev = data;
@ -874,11 +849,6 @@ static void stm32_dfsdm_dma_buffer_done(void *data)
int available = stm32_dfsdm_adc_dma_residue(adc);
size_t old_pos;
if (indio_dev->currentmode & INDIO_BUFFER_TRIGGERED) {
iio_trigger_poll_chained(indio_dev->trig);
return;
}
/*
* FIXME: In Kernel interface does not support cyclic DMA buffer,and
* offers only an interface to push data samples per samples.
@ -906,7 +876,15 @@ static void stm32_dfsdm_dma_buffer_done(void *data)
adc->bufi = 0;
old_pos = 0;
}
/* regular iio buffer without trigger */
/*
* In DMA mode the trigger services of IIO are not used
* (e.g. no call to iio_trigger_poll).
* Calling irq handler associated to the hardware trigger is not
* relevant as the conversions have already been done. Data
* transfers are performed directly in DMA callback instead.
* This implementation avoids to call trigger irq handler that
* may sleep, in an atomic context (DMA irq handler context).
*/
if (adc->dev_data->type == DFSDM_IIO)
iio_push_to_buffers(indio_dev, buffer);
}
@ -1536,8 +1514,7 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
}
ret = iio_triggered_buffer_setup(indio_dev,
&iio_pollfunc_store_time,
&stm32_dfsdm_adc_trigger_handler,
&iio_pollfunc_store_time, NULL,
&stm32_dfsdm_buffer_setup_ops);
if (ret) {
stm32_dfsdm_dma_release(indio_dev);

View File

@ -91,6 +91,8 @@ config SPS30
tristate "SPS30 particulate matter sensor"
depends on I2C
select CRC8
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say Y here to build support for the Sensirion SPS30 particulate
matter sensor.

View File

@ -167,16 +167,17 @@ static int vcnl4200_init(struct vcnl4000_data *data)
data->vcnl4200_ps.reg = VCNL4200_PS_DATA;
switch (id) {
case VCNL4200_PROD_ID:
/* Integration time is 50ms, but the experiments */
/* show 54ms in total. */
data->vcnl4200_al.sampling_rate = ktime_set(0, 54000 * 1000);
data->vcnl4200_ps.sampling_rate = ktime_set(0, 4200 * 1000);
/* Default wait time is 50ms, add 20% tolerance. */
data->vcnl4200_al.sampling_rate = ktime_set(0, 60000 * 1000);
/* Default wait time is 4.8ms, add 20% tolerance. */
data->vcnl4200_ps.sampling_rate = ktime_set(0, 5760 * 1000);
data->al_scale = 24000;
break;
case VCNL4040_PROD_ID:
/* Integration time is 80ms, add 10ms. */
data->vcnl4200_al.sampling_rate = ktime_set(0, 100000 * 1000);
data->vcnl4200_ps.sampling_rate = ktime_set(0, 100000 * 1000);
/* Default wait time is 80ms, add 20% tolerance. */
data->vcnl4200_al.sampling_rate = ktime_set(0, 96000 * 1000);
/* Default wait time is 5ms, add 20% tolerance. */
data->vcnl4200_ps.sampling_rate = ktime_set(0, 6000 * 1000);
data->al_scale = 120000;
break;
}

View File

@ -564,7 +564,7 @@ static int ak8974_read_raw(struct iio_dev *indio_dev,
* We read all axes and discard all but one, for optimized
* reading, use the triggered buffer.
*/
*val = le16_to_cpu(hw_values[chan->address]);
*val = (s16)le16_to_cpu(hw_values[chan->address]);
ret = IIO_VAL_INT;
}

View File

@ -269,7 +269,7 @@ static const struct iio_chan_spec ping_chan_spec[] = {
static const struct of_device_id of_ping_match[] = {
{ .compatible = "parallax,ping", .data = &pa_ping_cfg},
{ .compatible = "parallax,laserping", .data = &pa_ping_cfg},
{ .compatible = "parallax,laserping", .data = &pa_laser_ping_cfg},
{},
};

View File

@ -161,7 +161,8 @@ static int stm32_timer_start(struct stm32_timer_trigger *priv,
return 0;
}
static void stm32_timer_stop(struct stm32_timer_trigger *priv)
static void stm32_timer_stop(struct stm32_timer_trigger *priv,
struct iio_trigger *trig)
{
u32 ccer, cr1;
@ -179,6 +180,12 @@ static void stm32_timer_stop(struct stm32_timer_trigger *priv)
regmap_write(priv->regmap, TIM_PSC, 0);
regmap_write(priv->regmap, TIM_ARR, 0);
/* Force disable master mode */
if (stm32_timer_is_trgo2_name(trig->name))
regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS2, 0);
else
regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS, 0);
/* Make sure that registers are updated */
regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
}
@ -197,7 +204,7 @@ static ssize_t stm32_tt_store_frequency(struct device *dev,
return ret;
if (freq == 0) {
stm32_timer_stop(priv);
stm32_timer_stop(priv, trig);
} else {
ret = stm32_timer_start(priv, trig, freq);
if (ret)