diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 75f5bfbf2c37..8877c62609de 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -69,9 +69,11 @@ led3 { eth0_power: fixedregulator@0 { compatible = "regulator-fixed"; + regulator-name = "eth0_power"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + gpio = <&gpb 25 GPIO_ACTIVE_LOW>; enable-active-high; }; @@ -83,16 +85,39 @@ ir: ir { wlan0_power: fixedregulator@1 { compatible = "regulator-fixed"; + regulator-name = "wlan0_power"; + gpio = <&gpb 19 GPIO_ACTIVE_LOW>; enable-active-high; }; + + otg_power: fixedregulator@2 { + compatible = "regulator-fixed"; + + regulator-name = "otg_power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpf 14 GPIO_ACTIVE_LOW>; + enable-active-high; + }; }; &ext { clock-frequency = <48000000>; }; +&cgu { + /* + * Use the 32.768 kHz oscillator as the parent of the RTC for a higher + * precision. + */ + assigned-clocks = <&cgu JZ4780_CLK_OTGPHY>, <&cgu JZ4780_CLK_RTC>; + assigned-clock-parents = <0>, <&cgu JZ4780_CLK_RTCLK>; + assigned-clock-rates = <48000000>; +}; + &mmc0 { status = "okay"; @@ -396,6 +421,16 @@ &bch { status = "okay"; }; +&otg_phy { + status = "okay"; + + vcc-supply = <&otg_power>; +}; + +&otg { + status = "okay"; +}; + &pinctrl { pins_uart0: uart0 { function = "uart0"; @@ -489,7 +524,11 @@ pins_mmc1: mmc1 { }; &tcu { - /* 3 MHz for the system timer and clocksource */ - assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>; - assigned-clock-rates = <3000000>, <3000000>; + /* + * 750 kHz for the system timer and 3 MHz for the clocksource, + * use channel #0 for the system timer, #1 for the clocksource. + */ + assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_OST>; + assigned-clock-rates = <750000>, <3000000>, <3000000>; }; diff --git a/arch/mips/boot/dts/ingenic/cu1000-neo.dts b/arch/mips/boot/dts/ingenic/cu1000-neo.dts index 22a1066d637b..f98cf029efc3 100644 --- a/arch/mips/boot/dts/ingenic/cu1000-neo.dts +++ b/arch/mips/boot/dts/ingenic/cu1000-neo.dts @@ -3,7 +3,7 @@ #include "x1000.dtsi" #include -#include +#include #include / { @@ -31,6 +31,42 @@ led-0 { }; }; + ssi: spi-gpio { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + num-chipselects = <1>; + + mosi-gpios = <&gpd 2 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpd 3 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpd 0 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpd 1 GPIO_ACTIVE_HIGH>; + + status = "okay"; + + spi-max-frequency = <50000000>; + + sc16is752: expander@0 { + compatible = "nxp,sc16is752"; + reg = <0>; /* CE0 */ + spi-max-frequency = <4000000>; + + clocks = <&exclk_sc16is752>; + + interrupt-parent = <&gpc>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + exclk_sc16is752: sc16is752 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + }; + }; + wlan_pwrseq: msc1-pwrseq { compatible = "mmc-pwrseq-simple"; @@ -43,13 +79,19 @@ &exclk { clock-frequency = <24000000>; }; -&tcu { - /* 1500 kHz for the system timer and clocksource */ - assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>; - assigned-clock-rates = <1500000>, <1500000>; +&cgu { + /* + * Use the 32.768 kHz oscillator as the parent of the RTC for a higher + * precision. + */ + assigned-clocks = <&cgu X1000_CLK_RTC>; + assigned-clock-parents = <&cgu X1000_CLK_RTCLK>; +}; - /* Use channel #0 for the system timer channel #2 for the clocksource */ - ingenic,pwm-channels-mask = <0xfa>; +&ost { + /* 1500 kHz for the system timer and clocksource */ + assigned-clocks = <&ost OST_CLK_PERCPU_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; + assigned-clock-rates = <1500000>, <1500000>; }; &uart2 { @@ -135,6 +177,14 @@ lan8720a: ethernet-phy@0 { }; }; +&otg_phy { + status = "okay"; +}; + +&otg { + status = "okay"; +}; + &pinctrl { pins_uart2: uart2 { function = "uart2"; diff --git a/arch/mips/boot/dts/ingenic/cu1830-neo.dts b/arch/mips/boot/dts/ingenic/cu1830-neo.dts index 640f96c00d63..cfcb40edb7d9 100644 --- a/arch/mips/boot/dts/ingenic/cu1830-neo.dts +++ b/arch/mips/boot/dts/ingenic/cu1830-neo.dts @@ -3,7 +3,7 @@ #include "x1830.dtsi" #include -#include +#include #include / { @@ -31,6 +31,42 @@ led-0 { }; }; + ssi0: spi-gpio { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + num-chipselects = <1>; + + mosi-gpios = <&gpc 12 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpc 11 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpc 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpc 16 GPIO_ACTIVE_HIGH>; + + status = "okay"; + + spi-max-frequency = <50000000>; + + sc16is752: expander@0 { + compatible = "nxp,sc16is752"; + reg = <0>; /* CE0 */ + spi-max-frequency = <4000000>; + + clocks = <&exclk_sc16is752>; + + interrupt-parent = <&gpb>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + exclk_sc16is752: sc16is752 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + }; + }; + wlan_pwrseq: msc1-pwrseq { compatible = "mmc-pwrseq-simple"; @@ -43,13 +79,19 @@ &exclk { clock-frequency = <24000000>; }; -&tcu { - /* 1500 kHz for the system timer and clocksource */ - assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>; - assigned-clock-rates = <1500000>, <1500000>; +&cgu { + /* + * Use the 32.768 kHz oscillator as the parent of the RTC for a higher + * precision. + */ + assigned-clocks = <&cgu X1830_CLK_RTC>; + assigned-clock-parents = <&cgu X1830_CLK_RTCLK>; +}; - /* Use channel #0 for the system timer channel #2 for the clocksource */ - ingenic,pwm-channels-mask = <0xfa>; +&ost { + /* 1500 kHz for the system timer and clocksource */ + assigned-clocks = <&ost OST_CLK_PERCPU_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>; + assigned-clock-rates = <1500000>, <1500000>; }; &uart1 { @@ -73,6 +115,10 @@ ads7830: adc@48 { }; }; +&dtrng { + status = "okay"; +}; + &msc0 { status = "okay"; @@ -135,6 +181,14 @@ ip101gr: ethernet-phy@0 { }; }; +&otg_phy { + status = "okay"; +}; + +&otg { + status = "okay"; +}; + &pinctrl { pins_uart1: uart1 { function = "uart1"; diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi index dfb5a7e1bb21..8d01feef7ff5 100644 --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi @@ -61,13 +61,34 @@ rtc: rtc { }; cgu: jz4780-cgu@10000000 { - compatible = "ingenic,jz4780-cgu"; + compatible = "ingenic,jz4780-cgu", "simple-mfd"; reg = <0x10000000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0x100>; + + #clock-cells = <1>; clocks = <&ext>, <&rtc>; clock-names = "ext", "rtc"; - #clock-cells = <1>; + otg_phy: usb-phy@3c { + compatible = "ingenic,jz4780-phy"; + reg = <0x3c 0x10>; + + clocks = <&cgu JZ4780_CLK_OTG1>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + rng: rng@d8 { + compatible = "ingenic,jz4780-rng"; + reg = <0xd8 0x8>; + + status = "disabled"; + }; }; tcu: timer@10002000 { @@ -494,4 +515,24 @@ bch: bch@134d0000 { status = "disabled"; }; + + otg: usb@13500000 { + compatible = "ingenic,jz4780-otg", "snps,dwc2"; + reg = <0x13500000 0x40000>; + + interrupt-parent = <&intc>; + interrupts = <21>; + + clocks = <&cgu JZ4780_CLK_UHC>; + clock-names = "otg"; + + phys = <&otg_phy>; + phy-names = "usb2-phy"; + + g-rx-fifo-size = <768>; + g-np-tx-fifo-size = <256>; + g-tx-fifo-size = <256 256 256 256 256 256 256 512>; + + status = "disabled"; + }; }; diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi index 1f1f896dd1f7..aac9dedaf334 100644 --- a/arch/mips/boot/dts/ingenic/x1000.dtsi +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi @@ -52,13 +52,47 @@ rtclk: rtc { }; cgu: x1000-cgu@10000000 { - compatible = "ingenic,x1000-cgu"; + compatible = "ingenic,x1000-cgu", "simple-mfd"; reg = <0x10000000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0x100>; #clock-cells = <1>; clocks = <&exclk>, <&rtclk>; clock-names = "ext", "rtc"; + + otg_phy: usb-phy@3c { + compatible = "ingenic,x1000-phy"; + reg = <0x3c 0x10>; + + clocks = <&cgu X1000_CLK_OTGPHY>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + rng: rng@d8 { + compatible = "ingenic,x1000-rng"; + reg = <0xd8 0x8>; + + status = "disabled"; + }; + }; + + ost: timer@12000000 { + compatible = "ingenic,x1000-ost"; + reg = <0x12000000 0x3c>; + + #clock-cells = <1>; + + clocks = <&cgu X1000_CLK_OST>; + clock-names = "ost"; + + interrupt-parent = <&cpuintc>; + interrupts = <3>; }; tcu: timer@10002000 { @@ -323,4 +357,24 @@ mdio: mdio { status = "disabled"; }; }; + + otg: usb@13500000 { + compatible = "ingenic,x1000-otg", "snps,dwc2"; + reg = <0x13500000 0x40000>; + + interrupt-parent = <&intc>; + interrupts = <21>; + + clocks = <&cgu X1000_CLK_OTG>; + clock-names = "otg"; + + phys = <&otg_phy>; + phy-names = "usb2-phy"; + + g-rx-fifo-size = <768>; + g-np-tx-fifo-size = <256>; + g-tx-fifo-size = <256 256 256 256 256 256 256 512>; + + status = "disabled"; + }; }; diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi b/arch/mips/boot/dts/ingenic/x1830.dtsi index b05dac3ae308..b21c93057356 100644 --- a/arch/mips/boot/dts/ingenic/x1830.dtsi +++ b/arch/mips/boot/dts/ingenic/x1830.dtsi @@ -52,13 +52,40 @@ rtclk: rtc { }; cgu: x1830-cgu@10000000 { - compatible = "ingenic,x1830-cgu"; + compatible = "ingenic,x1830-cgu", "simple-mfd"; reg = <0x10000000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0x100>; #clock-cells = <1>; clocks = <&exclk>, <&rtclk>; clock-names = "ext", "rtc"; + + otg_phy: usb-phy@3c { + compatible = "ingenic,x1830-phy"; + reg = <0x3c 0x10>; + + clocks = <&cgu X1830_CLK_OTGPHY>; + + #phy-cells = <0>; + + status = "disabled"; + }; + }; + + ost: timer@12000000 { + compatible = "ingenic,x1830-ost", "ingenic,x1000-ost"; + reg = <0x12000000 0x3c>; + + #clock-cells = <1>; + + clocks = <&cgu X1830_CLK_OST>; + clock-names = "ost"; + + interrupt-parent = <&cpuintc>; + interrupts = <4>; }; tcu: timer@10002000 { @@ -236,6 +263,15 @@ i2c2: i2c-controller@10052000 { status = "disabled"; }; + dtrng: trng@10072000 { + compatible = "ingenic,x1830-dtrng"; + reg = <0x10072000 0xc>; + + clocks = <&cgu X1830_CLK_DTRNG>; + + status = "disabled"; + }; + pdma: dma-controller@13420000 { compatible = "ingenic,x1830-dma"; reg = <0x13420000 0x400 @@ -311,4 +347,24 @@ mdio: mdio { status = "disabled"; }; }; + + otg: usb@13500000 { + compatible = "ingenic,x1830-otg", "snps,dwc2"; + reg = <0x13500000 0x40000>; + + interrupt-parent = <&intc>; + interrupts = <21>; + + clocks = <&cgu X1830_CLK_OTG>; + clock-names = "otg"; + + phys = <&otg_phy>; + phy-names = "usb2-phy"; + + g-rx-fifo-size = <768>; + g-np-tx-fifo-size = <256>; + g-tx-fifo-size = <256 256 256 256 256 256 256 512>; + + status = "disabled"; + }; };