Merge branch 'func-names-comment'

Yang Shen says:

====================
Rid W=1 warnings in net

This is a set to fully clean drivers/net.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2021-05-17 14:12:39 -07:00
commit 16145dbde1
44 changed files with 80 additions and 80 deletions

View file

@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-or-later // SPDX-License-Identifier: GPL-2.0-or-later
/** /*
* emac-rockchip.c - Rockchip EMAC specific glue layer * emac-rockchip.c - Rockchip EMAC specific glue layer
* *
* Copyright (C) 2014 Romain Perier <romain.perier@gmail.com> * Copyright (C) 2014 Romain Perier <romain.perier@gmail.com>

View file

@ -432,7 +432,7 @@ static void atl1c_restore_vlan(struct atl1c_adapter *adapter)
} }
/** /**
* atl1c_set_mac - Change the Ethernet Address of the NIC * atl1c_set_mac_addr - Change the Ethernet Address of the NIC
* @netdev: network interface device structure * @netdev: network interface device structure
* @p: pointer to an address structure * @p: pointer to an address structure
* *
@ -960,7 +960,7 @@ static void atl1c_free_ring_resources(struct atl1c_adapter *adapter)
} }
/** /**
* atl1c_setup_mem_resources - allocate Tx / RX descriptor resources * atl1c_setup_ring_resources - allocate Tx / RX descriptor resources
* @adapter: board private structure * @adapter: board private structure
* *
* Return 0 on success, negative on failure * Return 0 on success, negative on failure
@ -1366,7 +1366,7 @@ static void atl1c_set_aspm(struct atl1c_hw *hw, u16 link_speed)
} }
/** /**
* atl1c_configure - Configure Transmit&Receive Unit after Reset * atl1c_configure_mac - Configure Transmit&Receive Unit after Reset
* @adapter: board private structure * @adapter: board private structure
* *
* Configure the Tx /Rx unit of the MAC after a reset. * Configure the Tx /Rx unit of the MAC after a reset.

View file

@ -357,7 +357,7 @@ static void atl1e_restore_vlan(struct atl1e_adapter *adapter)
} }
/** /**
* atl1e_set_mac - Change the Ethernet Address of the NIC * atl1e_set_mac_addr - Change the Ethernet Address of the NIC
* @netdev: network interface device structure * @netdev: network interface device structure
* @p: pointer to an address structure * @p: pointer to an address structure
* *
@ -787,7 +787,7 @@ static void atl1e_free_ring_resources(struct atl1e_adapter *adapter)
} }
/** /**
* atl1e_setup_mem_resources - allocate Tx / RX descriptor resources * atl1e_setup_ring_resources - allocate Tx / RX descriptor resources
* @adapter: board private structure * @adapter: board private structure
* *
* Return 0 on success, negative on failure * Return 0 on success, negative on failure

View file

@ -1011,7 +1011,7 @@ static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
} }
/** /**
* atl1_setup_mem_resources - allocate Tx / RX descriptor resources * atl1_setup_ring_resources - allocate Tx / RX descriptor resources
* @adapter: board private structure * @adapter: board private structure
* *
* Return 0 on success, negative on failure * Return 0 on success, negative on failure

View file

@ -13586,7 +13586,7 @@ static int bnx2x_set_qm_cid_count(struct bnx2x *bp)
} }
/** /**
* bnx2x_get_num_none_def_sbs - return the number of none default SBs * bnx2x_get_num_non_def_sbs - return the number of none default SBs
* @pdev: pci device * @pdev: pci device
* @cnic_cnt: count * @cnic_cnt: count
* *

View file

@ -4152,7 +4152,7 @@ void bnx2x_init_mcast_obj(struct bnx2x *bp,
/*************************** Credit handling **********************************/ /*************************** Credit handling **********************************/
/** /**
* atomic_add_ifless - add if the result is less than a given value. * __atomic_add_ifless - add if the result is less than a given value.
* *
* @v: pointer of type atomic_t * @v: pointer of type atomic_t
* @a: the amount to add to v... * @a: the amount to add to v...
@ -4180,7 +4180,7 @@ static inline bool __atomic_add_ifless(atomic_t *v, int a, int u)
} }
/** /**
* atomic_dec_ifmoe - dec if the result is more or equal than a given value. * __atomic_dec_ifmoe - dec if the result is more or equal than a given value.
* *
* @v: pointer of type atomic_t * @v: pointer of type atomic_t
* @a: the amount to dec from v... * @a: the amount to dec from v...

View file

@ -82,7 +82,7 @@ bfa_cee_get_attr_isr(struct bfa_cee *cee, enum bfa_status status)
} }
/** /**
* bfa_cee_get_attr_isr - CEE ISR for get-stats responses from f/w * bfa_cee_get_stats_isr - CEE ISR for get-stats responses from f/w
* *
* @cee: Pointer to the CEE module * @cee: Pointer to the CEE module
* @status: Return status from the f/w * @status: Return status from the f/w

View file

@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only // SPDX-License-Identifier: GPL-2.0-only
/** /*
* DOC: Cadence GEM PCI wrapper. * DOC: Cadence GEM PCI wrapper.
* *
* Copyright (C) 2016 Cadence Design Systems - https://www.cadence.com * Copyright (C) 2016 Cadence Design Systems - https://www.cadence.com

View file

@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only // SPDX-License-Identifier: GPL-2.0-only
/** /*
* 1588 PTP support for Cadence GEM device. * 1588 PTP support for Cadence GEM device.
* *
* Copyright (C) 2017 Cadence Design Systems - https://www.cadence.com * Copyright (C) 2017 Cadence Design Systems - https://www.cadence.com

View file

@ -711,7 +711,7 @@ static void xgmac_rx_refill(struct xgmac_priv *priv)
} }
/** /**
* init_xgmac_dma_desc_rings - init the RX/TX descriptor rings * xgmac_dma_desc_rings_init - init the RX/TX descriptor rings
* @dev: net device structure * @dev: net device structure
* Description: this function initializes the DMA RX/TX descriptors * Description: this function initializes the DMA RX/TX descriptors
* and allocates the socket buffers. * and allocates the socket buffers.
@ -859,7 +859,7 @@ static void xgmac_free_dma_desc_rings(struct xgmac_priv *priv)
} }
/** /**
* xgmac_tx: * xgmac_tx_complete:
* @priv: private driver structure * @priv: private driver structure
* Description: it reclaims resources after transmission completes. * Description: it reclaims resources after transmission completes.
*/ */
@ -1040,7 +1040,7 @@ static int xgmac_open(struct net_device *dev)
} }
/** /**
* xgmac_release - close entry point of the driver * xgmac_stop - close entry point of the driver
* @dev : device pointer. * @dev : device pointer.
* Description: * Description:
* This is the stop entry point of the driver. * This is the stop entry point of the driver.
@ -1812,7 +1812,7 @@ static int xgmac_probe(struct platform_device *pdev)
} }
/** /**
* xgmac_dvr_remove * xgmac_remove
* @pdev: platform device pointer * @pdev: platform device pointer
* Description: this function resets the TX/RX processes, disables the MAC RX/TX * Description: this function resets the TX/RX processes, disables the MAC RX/TX
* changes the link status, releases the DMA descriptor rings, * changes the link status, releases the DMA descriptor rings,

View file

@ -665,7 +665,7 @@ static void t3_reset_qset(struct sge_qset *q)
/** /**
* free_qset - free the resources of an SGE queue set * t3_free_qset - free the resources of an SGE queue set
* @adapter: the adapter owning the queue set * @adapter: the adapter owning the queue set
* @q: the queue set * @q: the queue set
* *
@ -1256,7 +1256,7 @@ static inline void t3_stop_tx_queue(struct netdev_queue *txq,
} }
/** /**
* eth_xmit - add a packet to the Ethernet Tx queue * t3_eth_xmit - add a packet to the Ethernet Tx queue
* @skb: the packet * @skb: the packet
* @dev: the egress net device * @dev: the egress net device
* *

View file

@ -446,7 +446,7 @@ void cxgb4_ptp_init(struct adapter *adapter)
} }
/** /**
* cxgb4_ptp_remove - disable PTP device and stop the overflow check * cxgb4_ptp_stop - disable PTP device and stop the overflow check
* @adapter: board private structure * @adapter: board private structure
* *
* Stop the PTP support. * Stop the PTP support.

View file

@ -6983,7 +6983,7 @@ int t4_fw_bye(struct adapter *adap, unsigned int mbox)
} }
/** /**
* t4_init_cmd - ask FW to initialize the device * t4_early_init - ask FW to initialize the device
* @adap: the adapter * @adap: the adapter
* @mbox: mailbox to use for the FW command * @mbox: mailbox to use for the FW command
* *
@ -10224,7 +10224,7 @@ int t4_load_cfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
} }
/** /**
* t4_set_vf_mac - Set MAC address for the specified VF * t4_set_vf_mac_acl - Set MAC address for the specified VF
* @adapter: The adapter * @adapter: The adapter
* @vf: one of the VFs instantiated by the specified PF * @vf: one of the VFs instantiated by the specified PF
* @naddr: the number of MAC addresses * @naddr: the number of MAC addresses

View file

@ -954,7 +954,7 @@ static void write_sgl(const struct sk_buff *skb, struct sge_txq *tq,
} }
/** /**
* check_ring_tx_db - check and potentially ring a TX queue's doorbell * ring_tx_db - check and potentially ring a TX queue's doorbell
* @adapter: the adapter * @adapter: the adapter
* @tq: the TX queue * @tq: the TX queue
* @n: number of new descriptors to give to HW * @n: number of new descriptors to give to HW

View file

@ -111,7 +111,7 @@ int hns_mac_get_port_info(struct hns_mac_cb *mac_cb,
} }
/** /**
*hns_mac_is_adjust_link - check is need change mac speed and duplex register *hns_mac_need_adjust_link - check is need change mac speed and duplex register
*@mac_cb: mac device *@mac_cb: mac device
*@speed: phy device speed *@speed: phy device speed
*@duplex:phy device duplex *@duplex:phy device duplex
@ -374,7 +374,7 @@ static void hns_mac_param_get(struct mac_params *param,
} }
/** /**
* hns_mac_queue_config_bc_en - set broadcast rx&tx enable * hns_mac_port_config_bc_en - set broadcast rx&tx enable
* @mac_cb: mac device * @mac_cb: mac device
* @port_num: queue number * @port_num: queue number
* @vlan_id: vlan id` * @vlan_id: vlan id`
@ -597,7 +597,7 @@ int hns_mac_set_autoneg(struct hns_mac_cb *mac_cb, u8 enable)
} }
/** /**
* hns_mac_set_autoneg - set rx & tx pause parameter * hns_mac_set_pauseparam - set rx & tx pause parameter
* @mac_cb: mac control block * @mac_cb: mac control block
* @rx_en: rx enable or not * @rx_en: rx enable or not
* @tx_en: tx enable or not * @tx_en: tx enable or not

View file

@ -227,7 +227,7 @@ hns_dsaf_reg_cnt_clr_ce(struct dsaf_device *dsaf_dev, u32 reg_cnt_clr_ce)
} }
/** /**
* hns_ppe_qid_cfg - config ppe qid * hns_dsaf_ppe_qid_cfg - config ppe qid
* @dsaf_dev: dsa fabric id * @dsaf_dev: dsa fabric id
* @qid_cfg: value array * @qid_cfg: value array
*/ */
@ -613,7 +613,7 @@ static void hns_dsaf_tbl_tcam_data_cfg(
} }
/** /**
* dsaf_tbl_tcam_mcast_cfg - tbl * hns_dsaf_tbl_tcam_mcast_cfg - tbl
* @dsaf_dev: dsa fabric id * @dsaf_dev: dsa fabric id
* @mcast: addr * @mcast: addr
*/ */
@ -1213,7 +1213,7 @@ void hns_dsaf_get_rx_mac_pause_en(struct dsaf_device *dsaf_dev, int mac_id,
} }
/** /**
* hns_dsaf_tbl_tcam_init - INT * hns_dsaf_comm_init - INT
* @dsaf_dev: dsa fabric id * @dsaf_dev: dsa fabric id
*/ */
static void hns_dsaf_comm_init(struct dsaf_device *dsaf_dev) static void hns_dsaf_comm_init(struct dsaf_device *dsaf_dev)
@ -2111,7 +2111,7 @@ static void hns_dsaf_free_dev(struct dsaf_device *dsaf_dev)
} }
/** /**
* dsaf_pfc_unit_cnt - set pfc unit count * hns_dsaf_pfc_unit_cnt - set pfc unit count
* @dsaf_dev: dsa fabric id * @dsaf_dev: dsa fabric id
* @mac_id: id in use * @mac_id: id in use
* @rate: value array * @rate: value array
@ -2142,7 +2142,7 @@ static void hns_dsaf_pfc_unit_cnt(struct dsaf_device *dsaf_dev, int mac_id,
} }
/** /**
* dsaf_port_work_rate_cfg - fifo * hns_dsaf_port_work_rate_cfg - fifo
* @dsaf_dev: dsa fabric id * @dsaf_dev: dsa fabric id
* @mac_id: mac contrl block * @mac_id: mac contrl block
* @rate_mode: value array * @rate_mode: value array
@ -2738,7 +2738,7 @@ void hns_dsaf_get_strings(int stringset, u8 *data, int port,
} }
/** /**
*hns_dsaf_get_sset_count - get dsaf regs count *hns_dsaf_get_regs_count - get dsaf regs count
*return dsaf regs count *return dsaf regs count
*/ */
int hns_dsaf_get_regs_count(void) int hns_dsaf_get_regs_count(void)
@ -2949,7 +2949,7 @@ int hns_dsaf_wait_pkt_clean(struct dsaf_device *dsaf_dev, int port)
} }
/** /**
* dsaf_probe - probo dsaf dev * hns_dsaf_probe - probo dsaf dev
* @pdev: dasf platform device * @pdev: dasf platform device
* return 0 - success , negative --fail * return 0 - success , negative --fail
*/ */
@ -3004,7 +3004,7 @@ static int hns_dsaf_probe(struct platform_device *pdev)
} }
/** /**
* dsaf_remove - remove dsaf dev * hns_dsaf_remove - remove dsaf dev
* @pdev: dasf platform device * @pdev: dasf platform device
*/ */
static int hns_dsaf_remove(struct platform_device *pdev) static int hns_dsaf_remove(struct platform_device *pdev)

View file

@ -351,7 +351,7 @@ hns_dsaf_srst_chns(struct dsaf_device *dsaf_dev, u32 msk, bool dereset)
} }
/** /**
* hns_dsaf_srst_chns - reset dsaf channels * hns_dsaf_srst_chns_acpi - reset dsaf channels
* @dsaf_dev: dsaf device struct pointer * @dsaf_dev: dsaf device struct pointer
* @msk: xbar channels mask value: * @msk: xbar channels mask value:
* @dereset: false - request reset , true - drop reset * @dereset: false - request reset , true - drop reset
@ -501,7 +501,7 @@ static void hns_ppe_com_srst(struct dsaf_device *dsaf_dev, bool dereset)
} }
/** /**
* hns_mac_get_sds_mode - get phy ifterface form serdes mode * hns_mac_get_phy_if - get phy ifterface form serdes mode
* @mac_cb: mac control block * @mac_cb: mac control block
* retuen phy interface * retuen phy interface
*/ */

View file

@ -296,7 +296,7 @@ int hns_ppe_wait_tx_fifo_clean(struct hns_ppe_cb *ppe_cb)
} }
/** /**
* ppe_init_hw - init ppe * hns_ppe_init_hw - init ppe
* @ppe_cb: ppe device * @ppe_cb: ppe device
*/ */
static void hns_ppe_init_hw(struct hns_ppe_cb *ppe_cb) static void hns_ppe_init_hw(struct hns_ppe_cb *ppe_cb)
@ -343,7 +343,7 @@ static void hns_ppe_init_hw(struct hns_ppe_cb *ppe_cb)
} }
/** /**
* ppe_uninit_hw - uninit ppe * hns_ppe_uninit_hw - uninit ppe
* @ppe_cb: ppe device * @ppe_cb: ppe device
*/ */
static void hns_ppe_uninit_hw(struct hns_ppe_cb *ppe_cb) static void hns_ppe_uninit_hw(struct hns_ppe_cb *ppe_cb)
@ -382,7 +382,7 @@ void hns_ppe_uninit(struct dsaf_device *dsaf_dev)
} }
/** /**
* hns_ppe_reset - reinit ppe/rcb hw * hns_ppe_reset_common - reinit ppe/rcb hw
* @dsaf_dev: dasf device * @dsaf_dev: dasf device
* @ppe_common_index: the index * @ppe_common_index: the index
* return void * return void
@ -455,7 +455,7 @@ int hns_ppe_get_regs_count(void)
} }
/** /**
* ppe_get_strings - get ppe srting * hns_ppe_get_strings - get ppe srting
* @ppe_cb: ppe device * @ppe_cb: ppe device
* @stringset: string set type * @stringset: string set type
* @data: output string * @data: output string

View file

@ -913,7 +913,7 @@ int hns_rcb_get_common_regs_count(void)
} }
/** /**
*rcb_get_sset_count - rcb ring regs count *hns_rcb_get_ring_regs_count - rcb ring regs count
*return regs count *return regs count
*/ */
int hns_rcb_get_ring_regs_count(void) int hns_rcb_get_ring_regs_count(void)

View file

@ -104,7 +104,7 @@ static void hns_xgmac_rx_enable(struct mac_driver *drv, u32 value)
} }
/** /**
* hns_xgmac_tx_lf_rf_insert - insert lf rf control about xgmac * hns_xgmac_lf_rf_insert - insert lf rf control about xgmac
* @mac_drv: mac driver * @mac_drv: mac driver
* @mode: inserf rf or lf * @mode: inserf rf or lf
*/ */
@ -115,7 +115,7 @@ static void hns_xgmac_lf_rf_insert(struct mac_driver *mac_drv, u32 mode)
} }
/** /**
* hns_xgmac__lf_rf_control_init - initial the lf rf control register * hns_xgmac_lf_rf_control_init - initial the lf rf control register
* @mac_drv: mac driver * @mac_drv: mac driver
*/ */
static void hns_xgmac_lf_rf_control_init(struct mac_driver *mac_drv) static void hns_xgmac_lf_rf_control_init(struct mac_driver *mac_drv)

View file

@ -770,7 +770,7 @@ static u32 smooth_alg(u32 new_param, u32 old_param)
} }
/** /**
* hns_nic_adp_coalesce - self adapte coalesce according to rx rate * hns_nic_adpt_coalesce - self adapte coalesce according to rx rate
* @ring_data: pointer to hns_nic_ring_data * @ring_data: pointer to hns_nic_ring_data
**/ **/
static void hns_nic_adpt_coalesce(struct hns_nic_ring_data *ring_data) static void hns_nic_adpt_coalesce(struct hns_nic_ring_data *ring_data)

View file

@ -192,7 +192,7 @@ static int hns_nic_get_link_ksettings(struct net_device *net_dev,
} }
/** /**
*hns_nic_set_link_settings - implement ethtool set link ksettings *hns_nic_set_link_ksettings - implement ethtool set link ksettings
*@net_dev: net_device *@net_dev: net_device
*@cmd: ethtool_link_ksettings *@cmd: ethtool_link_ksettings
*retuen 0 - success , negative --fail *retuen 0 - success , negative --fail
@ -827,7 +827,7 @@ hns_get_channels(struct net_device *net_dev, struct ethtool_channels *ch)
} }
/** /**
* get_ethtool_stats - get detail statistics. * hns_get_ethtool_stats - get detail statistics.
* @netdev: net device * @netdev: net device
* @stats: statistics info. * @stats: statistics info.
* @data: statistics data. * @data: statistics data.
@ -885,7 +885,7 @@ static void hns_get_ethtool_stats(struct net_device *netdev,
} }
/** /**
* get_strings: Return a set of strings that describe the requested objects * hns_get_strings: Return a set of strings that describe the requested objects
* @netdev: net device * @netdev: net device
* @stringset: string set ID. * @stringset: string set ID.
* @data: objects data. * @data: objects data.

View file

@ -594,7 +594,7 @@ static void cmdq_update_errcode(struct hinic_cmdq *cmdq, u16 prod_idx,
} }
/** /**
* cmdq_arm_ceq_handler - cmdq completion event handler for sync command * cmdq_sync_cmd_handler - cmdq completion event handler for sync command
* @cmdq: the cmdq of the command * @cmdq: the cmdq of the command
* @cons_idx: the consumer index to update the error code for * @cons_idx: the consumer index to update the error code for
* @errcode: the error code * @errcode: the error code

View file

@ -48,7 +48,7 @@ enum io_status {
}; };
/** /**
* get_capability - convert device capabilities to NIC capabilities * parse_capability - convert device capabilities to NIC capabilities
* @hwdev: the HW device to set and convert device capabilities for * @hwdev: the HW device to set and convert device capabilities for
* @dev_cap: device capabilities from FW * @dev_cap: device capabilities from FW
* *
@ -92,7 +92,7 @@ static int parse_capability(struct hinic_hwdev *hwdev,
} }
/** /**
* get_cap_from_fw - get device capabilities from FW * get_capability - get device capabilities from FW
* @pfhwdev: the PF HW device to get capabilities for * @pfhwdev: the PF HW device to get capabilities for
* *
* Return 0 - Success, negative - Failure * Return 0 - Success, negative - Failure
@ -346,7 +346,7 @@ static int wait_for_db_state(struct hinic_hwdev *hwdev)
} }
/** /**
* clear_io_resource - set the IO resources as not active in the NIC * clear_io_resources - set the IO resources as not active in the NIC
* @hwdev: the NIC HW device * @hwdev: the NIC HW device
* *
* Return 0 - Success, negative - Failure * Return 0 - Success, negative - Failure
@ -1090,7 +1090,7 @@ struct hinic_sq *hinic_hwdev_get_sq(struct hinic_hwdev *hwdev, int i)
} }
/** /**
* hinic_hwdev_get_sq - get RQ * hinic_hwdev_get_rq - get RQ
* @hwdev: the NIC HW device * @hwdev: the NIC HW device
* @i: the position of the RQ * @i: the position of the RQ
* *

View file

@ -334,7 +334,7 @@ static void set_dma_attr(struct hinic_hwif *hwif, u32 entry_idx,
} }
/** /**
* dma_attr_table_init - initialize the default dma attributes * dma_attr_init - initialize the default dma attributes
* @hwif: the HW interface of a pci function device * @hwif: the HW interface of a pci function device
**/ **/
static void dma_attr_init(struct hinic_hwif *hwif) static void dma_attr_init(struct hinic_hwif *hwif)

View file

@ -894,7 +894,7 @@ struct hinic_rq_wqe *hinic_rq_read_next_wqe(struct hinic_rq *rq,
} }
/** /**
* hinic_put_wqe - release the ci for new wqes * hinic_rq_put_wqe - release the ci for new wqes
* @rq: recv queue * @rq: recv queue
* @cons_idx: consumer index of the wqe * @cons_idx: consumer index of the wqe
* @wqe_size: the size of the wqe * @wqe_size: the size of the wqe

View file

@ -232,7 +232,7 @@ static void free_txqs(struct hinic_dev *nic_dev)
} }
/** /**
* create_txqs - Create the Logical Rx Queues of specific NIC device * create_rxqs - Create the Logical Rx Queues of specific NIC device
* @nic_dev: the specific NIC device * @nic_dev: the specific NIC device
* *
* Return 0 - Success, negative - Failure * Return 0 - Success, negative - Failure
@ -288,7 +288,7 @@ static int create_rxqs(struct hinic_dev *nic_dev)
} }
/** /**
* free_txqs - Free the Logical Rx Queues of specific NIC device * free_rxqs - Free the Logical Rx Queues of specific NIC device
* @nic_dev: the specific NIC device * @nic_dev: the specific NIC device
**/ **/
static void free_rxqs(struct hinic_dev *nic_dev) static void free_rxqs(struct hinic_dev *nic_dev)

View file

@ -660,7 +660,7 @@ static void tx_free_skb(struct hinic_dev *nic_dev, struct sk_buff *skb,
} }
/** /**
* free_all_rx_skbs - free all skbs in tx queue * free_all_tx_skbs - free all skbs in tx queue
* @txq: tx queue * @txq: tx queue
**/ **/
static void free_all_tx_skbs(struct hinic_txq *txq) static void free_all_tx_skbs(struct hinic_txq *txq)

View file

@ -2153,7 +2153,7 @@ static void sw_cfg_broad_storm(struct ksz_hw *hw, u8 percent)
} }
/** /**
* sw_get_board_storm - get broadcast storm threshold * sw_get_broad_storm - get broadcast storm threshold
* @hw: The hardware instance. * @hw: The hardware instance.
* @percent: Buffer to store the broadcast storm threshold percentage. * @percent: Buffer to store the broadcast storm threshold percentage.
* *
@ -2973,7 +2973,7 @@ static void hw_r_phy(struct ksz_hw *hw, int port, u16 reg, u16 *val)
} }
/** /**
* port_w_phy - write data to PHY register * hw_w_phy - write data to PHY register
* @hw: The hardware instance. * @hw: The hardware instance.
* @port: Port to write. * @port: Port to write.
* @reg: PHY register to write. * @reg: PHY register to write.
@ -4782,7 +4782,7 @@ static void transmit_cleanup(struct dev_info *hw_priv, int normal)
} }
/** /**
* transmit_done - transmit done processing * tx_done - transmit done processing
* @hw_priv: Network device. * @hw_priv: Network device.
* *
* This routine is called when the transmit interrupt is triggered, indicating * This routine is called when the transmit interrupt is triggered, indicating

View file

@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-or-later // SPDX-License-Identifier: GPL-2.0-or-later
/** /*
* Microchip ENCX24J600 ethernet driver * Microchip ENCX24J600 ethernet driver
* *
* Copyright (C) 2015 Gridpoint * Copyright (C) 2015 Gridpoint

View file

@ -2743,7 +2743,7 @@ static int s2io_chk_rx_buffers(struct s2io_nic *nic, struct ring_info *ring)
} }
/** /**
* s2io_poll - Rx interrupt handler for NAPI support * s2io_poll_msix - Rx interrupt handler for NAPI support
* @napi : pointer to the napi structure. * @napi : pointer to the napi structure.
* @budget : The number of packets that were budgeted to be processed * @budget : The number of packets that were budgeted to be processed
* during one pass through the 'Poll" function. * during one pass through the 'Poll" function.
@ -5288,7 +5288,7 @@ s2io_ethtool_set_link_ksettings(struct net_device *dev,
} }
/** /**
* s2io_ethtol_get_link_ksettings - Return link specific information. * s2io_ethtool_get_link_ksettings - Return link specific information.
* @dev: pointer to netdev * @dev: pointer to netdev
* @cmd : pointer to the structure with parameters given by ethtool * @cmd : pointer to the structure with parameters given by ethtool
* to return link information. * to return link information.

View file

@ -4884,7 +4884,7 @@ vxge_hw_vpath_open(struct __vxge_hw_device *hldev,
} }
/** /**
* vxge_hw_vpath_rx_doorbell_post - Close the handle got from previous vpath * vxge_hw_vpath_rx_doorbell_init - Close the handle got from previous vpath
* (vpath) open * (vpath) open
* @vp: Handle got from previous vpath open * @vp: Handle got from previous vpath open
* *

View file

@ -1799,7 +1799,7 @@ static void vxge_reset(struct work_struct *work)
} }
/** /**
* vxge_poll - Receive handler when Receive Polling is used. * vxge_poll_msix - Receive handler when Receive Polling is used.
* @napi: pointer to the napi structure. * @napi: pointer to the napi structure.
* @budget: Number of packets budgeted to be processed in this iteration. * @budget: Number of packets budgeted to be processed in this iteration.
* *
@ -4752,7 +4752,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
} }
/** /**
* vxge_rem_nic - Free the PCI device * vxge_remove - Free the PCI device
* @pdev: structure containing the PCI related information of the device. * @pdev: structure containing the PCI related information of the device.
* Description: This function is called by the Pci subsystem to release a * Description: This function is called by the Pci subsystem to release a
* PCI device and free up all resource held up by the device. * PCI device and free up all resource held up by the device.

View file

@ -36,7 +36,7 @@ enum nfp_net_mbox_cmsg_state {
}; };
/** /**
* struct nfp_ccm_mbox_skb_cb - CCM mailbox specific info * struct nfp_ccm_mbox_cmsg_cb - CCM mailbox specific info
* @state: processing state (/stage) of the message * @state: processing state (/stage) of the message
* @err: error encountered during processing if any * @err: error encountered during processing if any
* @max_len: max(request_len, reply_len) * @max_len: max(request_len, reply_len)

View file

@ -21,7 +21,7 @@
#define NFP_TUN_PRE_TUN_IPV6_BIT BIT(7) #define NFP_TUN_PRE_TUN_IPV6_BIT BIT(7)
/** /**
* struct nfp_tun_pre_run_rule - rule matched before decap * struct nfp_tun_pre_tun_rule - rule matched before decap
* @flags: options for the rule offset * @flags: options for the rule offset
* @port_idx: index of destination MAC address for the rule * @port_idx: index of destination MAC address for the rule
* @vlan_tci: VLAN info associated with MAC * @vlan_tci: VLAN info associated with MAC

View file

@ -24,7 +24,7 @@
#define NFFW_FWID_ALL 255 #define NFFW_FWID_ALL 255
/** /*
* NFFW_INFO_VERSION history: * NFFW_INFO_VERSION history:
* 0: This was never actually used (before versioning), but it refers to * 0: This was never actually used (before versioning), but it refers to
* the previous struct which had FWINFO_CNT = MEINFO_CNT = 120 that later * the previous struct which had FWINFO_CNT = MEINFO_CNT = 120 that later

View file

@ -746,7 +746,7 @@ static int qlcnic_83xx_idc_unknown_state(struct qlcnic_adapter *adapter)
} }
/** /**
* qlcnic_83xx_idc_cold_state * qlcnic_83xx_idc_cold_state_handler
* *
* @adapter: adapter structure * @adapter: adapter structure
* *

View file

@ -180,7 +180,7 @@ static int qlcnic_83xx_init_non_privileged_vnic(struct qlcnic_adapter *adapter)
} }
/** /**
* qlcnic_83xx_vnic_opmode * qlcnic_83xx_config_vnic_opmode
* *
* @adapter: adapter structure * @adapter: adapter structure
* Identify virtual NIC operational modes. * Identify virtual NIC operational modes.

View file

@ -789,7 +789,7 @@ static void sxgbe_tx_queue_clean(struct sxgbe_tx_queue *tqueue)
} }
/** /**
* sxgbe_tx_clean: * sxgbe_tx_all_clean:
* @priv: driver private structure * @priv: driver private structure
* Description: it reclaims resources after transmission completes. * Description: it reclaims resources after transmission completes.
*/ */
@ -1015,7 +1015,7 @@ static void sxgbe_tx_timer(struct timer_list *t)
} }
/** /**
* sxgbe_init_tx_coalesce: init tx mitigation options. * sxgbe_tx_init_coalesce: init tx mitigation options.
* @priv: driver private structure * @priv: driver private structure
* Description: * Description:
* This inits the transmit coalesce parameters: i.e. timer rate, * This inits the transmit coalesce parameters: i.e. timer rate,

View file

@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0 // SPDX-License-Identifier: GPL-2.0
/** /*
* sni_ave.c - Socionext UniPhier AVE ethernet driver * sni_ave.c - Socionext UniPhier AVE ethernet driver
* Copyright 2014 Panasonic Corporation * Copyright 2014 Panasonic Corporation
* Copyright 2015-2017 Socionext Inc. * Copyright 2015-2017 Socionext Inc.

View file

@ -70,7 +70,7 @@ enum {
}; };
/** /**
* struct ale_dev_id - The ALE version/SoC specific configuration * struct cpsw_ale_dev_id - The ALE version/SoC specific configuration
* @dev_id: ALE version/SoC id * @dev_id: ALE version/SoC id
* @features: features supported by ALE * @features: features supported by ALE
* @tbl_entries: number of ALE entries * @tbl_entries: number of ALE entries

View file

@ -1897,7 +1897,7 @@ static void velocity_error(struct velocity_info *vptr, int status)
} }
/** /**
* tx_srv - transmit interrupt service * velocity_tx_srv - transmit interrupt service
* @vptr: Velocity * @vptr: Velocity
* *
* Scan the queues looking for transmitted packets that * Scan the queues looking for transmitted packets that
@ -2453,7 +2453,7 @@ static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
} }
/** /**
* velocity_get_status - statistics callback * velocity_get_stats - statistics callback
* @dev: network device * @dev: network device
* *
* Callback from the network layer to allow driver statistics * Callback from the network layer to allow driver statistics
@ -3723,7 +3723,7 @@ static int __init velocity_init_module(void)
} }
/** /**
* velocity_cleanup - module unload * velocity_cleanup_module - module unload
* *
* When the velocity hardware is unloaded this function is called. * When the velocity hardware is unloaded this function is called.
* It will clean up the notifiers and the unregister the PCI * It will clean up the notifiers and the unregister the PCI

View file

@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0+ // SPDX-License-Identifier: GPL-2.0+
/** /*
* Driver for Analog Devices Industrial Ethernet PHYs * Driver for Analog Devices Industrial Ethernet PHYs
* *
* Copyright 2019 Analog Devices Inc. * Copyright 2019 Analog Devices Inc.

View file

@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0+ // SPDX-License-Identifier: GPL-2.0+
/** /*
* drivers/net/phy/rockchip.c * drivers/net/phy/rockchip.c
* *
* Driver for ROCKCHIP Ethernet PHYs * Driver for ROCKCHIP Ethernet PHYs