diff --git a/sound/core/control.c b/sound/core/control.c
index 0b3026d937b1..8a77620a3854 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -889,7 +889,7 @@ static int snd_ctl_elem_read(struct snd_card *card,
 
 	index_offset = snd_ctl_get_ioff(kctl, &control->id);
 	vd = &kctl->vd[index_offset];
-	if (!(vd->access & SNDRV_CTL_ELEM_ACCESS_READ) && kctl->get == NULL)
+	if (!(vd->access & SNDRV_CTL_ELEM_ACCESS_READ) || kctl->get == NULL)
 		return -EPERM;
 
 	snd_ctl_build_ioff(&control->id, kctl, index_offset);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index c71dcacea807..96143df19b21 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -181,7 +181,7 @@ static const struct kernel_param_ops param_ops_xint = {
 };
 #define param_check_xint param_check_int
 
-static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
+static int power_save = -1;
 module_param(power_save, xint, 0644);
 MODULE_PARM_DESC(power_save, "Automatic power-saving timeout "
 		 "(in second, 0 = disable).");
@@ -2186,6 +2186,24 @@ static int azx_probe(struct pci_dev *pci,
 	return err;
 }
 
+#ifdef CONFIG_PM
+/* On some boards setting power_save to a non 0 value leads to clicking /
+ * popping sounds when ever we enter/leave powersaving mode. Ideally we would
+ * figure out how to avoid these sounds, but that is not always feasible.
+ * So we keep a list of devices where we disable powersaving as its known
+ * to causes problems on these devices.
+ */
+static struct snd_pci_quirk power_save_blacklist[] = {
+	/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
+	SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0),
+	/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
+	SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0),
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=198611 */
+	SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0),
+	{}
+};
+#endif /* CONFIG_PM */
+
 /* number of codec slots for each chipset: 0 = default slots (i.e. 4) */
 static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = {
 	[AZX_DRIVER_NVIDIA] = 8,
@@ -2198,6 +2216,7 @@ static int azx_probe_continue(struct azx *chip)
 	struct hdac_bus *bus = azx_bus(chip);
 	struct pci_dev *pci = chip->pci;
 	int dev = chip->dev_index;
+	int val;
 	int err;
 
 	hda->probe_continued = 1;
@@ -2278,7 +2297,22 @@ static int azx_probe_continue(struct azx *chip)
 
 	chip->running = 1;
 	azx_add_card_list(chip);
-	snd_hda_set_power_save(&chip->bus, power_save * 1000);
+
+	val = power_save;
+#ifdef CONFIG_PM
+	if (val == -1) {
+		const struct snd_pci_quirk *q;
+
+		val = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
+		q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist);
+		if (q && val) {
+			dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n",
+				 q->subvendor, q->subdevice);
+			val = 0;
+		}
+	}
+#endif /* CONFIG_PM */
+	snd_hda_set_power_save(&chip->bus, val * 1000);
 	if (azx_has_pm_runtime(chip) || hda->use_vga_switcheroo)
 		pm_runtime_put_autosuspend(&pci->dev);
 
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index ce28f7ce64e6..b9c93fa0a51c 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4997,13 +4997,14 @@ static void alc_fixup_tpt470_dock(struct hda_codec *codec,
 
 	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
 		spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP;
+		snd_hda_apply_pincfgs(codec, pincfgs);
+	} else if (action == HDA_FIXUP_ACT_INIT) {
 		/* Enable DOCK device */
 		snd_hda_codec_write(codec, 0x17, 0,
 			    AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0);
 		/* Enable DOCK device */
 		snd_hda_codec_write(codec, 0x19, 0,
 			    AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0);
-		snd_hda_apply_pincfgs(codec, pincfgs);
 	}
 }
 
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 50252046b01d..754e632a27bd 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3325,4 +3325,51 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
 	}
 },
 
+{
+	/*
+	 * Bower's & Wilkins PX headphones only support the 48 kHz sample rate
+	 * even though it advertises more. The capture interface doesn't work
+	 * even on windows.
+	 */
+	USB_DEVICE(0x19b5, 0x0021),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_STANDARD_MIXER,
+			},
+			/* Capture */
+			{
+				.ifnum = 1,
+				.type = QUIRK_IGNORE_INTERFACE,
+			},
+			/* Playback */
+			{
+				.ifnum = 2,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S16_LE,
+					.channels = 2,
+					.iface = 2,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.attributes = UAC_EP_CS_ATTR_FILL_MAX |
+						UAC_EP_CS_ATTR_SAMPLE_RATE,
+					.endpoint = 0x03,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) {
+						48000
+					}
+				}
+			},
+		}
+	}
+},
+
 #undef USB_DEVICE_VENDOR_SPEC
diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c
index a0951505c7f5..4ed9d0c41843 100644
--- a/sound/x86/intel_hdmi_audio.c
+++ b/sound/x86/intel_hdmi_audio.c
@@ -50,6 +50,7 @@
 /*standard module options for ALSA. This module supports only one card*/
 static int hdmi_card_index = SNDRV_DEFAULT_IDX1;
 static char *hdmi_card_id = SNDRV_DEFAULT_STR1;
+static bool single_port;
 
 module_param_named(index, hdmi_card_index, int, 0444);
 MODULE_PARM_DESC(index,
@@ -57,6 +58,9 @@ MODULE_PARM_DESC(index,
 module_param_named(id, hdmi_card_id, charp, 0444);
 MODULE_PARM_DESC(id,
 		"ID string for INTEL Intel HDMI Audio controller.");
+module_param(single_port, bool, 0444);
+MODULE_PARM_DESC(single_port,
+		"Single-port mode (for compatibility)");
 
 /*
  * ELD SA bits in the CEA Speaker Allocation data block
@@ -1579,7 +1583,11 @@ static irqreturn_t display_pipe_interrupt_handler(int irq, void *dev_id)
 static void notify_audio_lpe(struct platform_device *pdev, int port)
 {
 	struct snd_intelhad_card *card_ctx = platform_get_drvdata(pdev);
-	struct snd_intelhad *ctx = &card_ctx->pcm_ctx[port];
+	struct snd_intelhad *ctx;
+
+	ctx = &card_ctx->pcm_ctx[single_port ? 0 : port];
+	if (single_port)
+		ctx->port = port;
 
 	schedule_work(&ctx->hdmi_audio_wq);
 }
@@ -1743,6 +1751,7 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev)
 {
 	struct snd_card *card;
 	struct snd_intelhad_card *card_ctx;
+	struct snd_intelhad *ctx;
 	struct snd_pcm *pcm;
 	struct intel_hdmi_lpe_audio_pdata *pdata;
 	int irq;
@@ -1787,6 +1796,21 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, card_ctx);
 
+	card_ctx->num_pipes = pdata->num_pipes;
+	card_ctx->num_ports = single_port ? 1 : pdata->num_ports;
+
+	for_each_port(card_ctx, port) {
+		ctx = &card_ctx->pcm_ctx[port];
+		ctx->card_ctx = card_ctx;
+		ctx->dev = card_ctx->dev;
+		ctx->port = single_port ? -1 : port;
+		ctx->pipe = -1;
+
+		spin_lock_init(&ctx->had_spinlock);
+		mutex_init(&ctx->mutex);
+		INIT_WORK(&ctx->hdmi_audio_wq, had_audio_wq);
+	}
+
 	dev_dbg(&pdev->dev, "%s: mmio_start = 0x%x, mmio_end = 0x%x\n",
 		__func__, (unsigned int)res_mmio->start,
 		(unsigned int)res_mmio->end);
@@ -1816,19 +1840,12 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev)
 	init_channel_allocations();
 
 	card_ctx->num_pipes = pdata->num_pipes;
-	card_ctx->num_ports = pdata->num_ports;
+	card_ctx->num_ports = single_port ? 1 : pdata->num_ports;
 
 	for_each_port(card_ctx, port) {
-		struct snd_intelhad *ctx = &card_ctx->pcm_ctx[port];
 		int i;
 
-		ctx->card_ctx = card_ctx;
-		ctx->dev = card_ctx->dev;
-		ctx->port = port;
-		ctx->pipe = -1;
-
-		INIT_WORK(&ctx->hdmi_audio_wq, had_audio_wq);
-
+		ctx = &card_ctx->pcm_ctx[port];
 		ret = snd_pcm_new(card, INTEL_HAD, port, MAX_PB_STREAMS,
 				  MAX_CAP_STREAMS, &pcm);
 		if (ret)