From 1663682cf090b94bd8531a0b9be812e10477143f Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Thu, 24 Nov 2016 21:45:18 +0100 Subject: [PATCH] pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508) All other registers on these chips are 8-bit, but reg_sense is 16-bits and therefore needs to be moved down one notch. This was apparently overlooked in the conversion to regmap, which only updated the register locations for the 16-bit chips. Fixes: 6489677f86c3 ("pinctrl-sx150x: Replace sx150x_*_cfg by means of regmap API") Signed-off-by: Peter Rosin Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-sx150x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-sx150x.c b/drivers/pinctrl/pinctrl-sx150x.c index f9e559e22537..a19c814843aa 100644 --- a/drivers/pinctrl/pinctrl-sx150x.c +++ b/drivers/pinctrl/pinctrl-sx150x.c @@ -156,7 +156,7 @@ static const struct sx150x_device_data sx1508q_device_data = { .reg_data = 0x08, .reg_irq_mask = 0x09, .reg_irq_src = 0x0c, - .reg_sense = 0x0b, + .reg_sense = 0x0a, .pri.x789 = { .reg_drain = 0x05, .reg_polarity = 0x06, @@ -221,7 +221,7 @@ static const struct sx150x_device_data sx1502q_device_data = { .reg_data = 0x00, .reg_irq_mask = 0x05, .reg_irq_src = 0x08, - .reg_sense = 0x07, + .reg_sense = 0x06, .pri.x123 = { .reg_pld_mode = 0x10, .reg_pld_table0 = 0x11,