mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-27 12:57:53 +00:00
ARM: dts: stm32: Add support for the emtrion emSBC-Argon
This patch presents the DT patches for the emtrion GmbH Argon board series. They are available with STM32MP157 from STMicroelectronics with 512 MByte Memory. The devicetree stm32mp157c-emstamp-argon.dtsi is the common part providing the module components and the basic support for the SoC. The support for the emSBC-Argon baseboard in the developer-kit configuration is provided by the stm32mp157c-emsbc-argon.dts file. Signed-off-by: Reinhold Mueller <reinhold.mueller@emtrion.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This commit is contained in:
parent
7f25465e77
commit
16e3e44c5b
4 changed files with 698 additions and 0 deletions
|
@ -1161,6 +1161,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
|
|||
stm32mp157c-dhcom-picoitx.dtb \
|
||||
stm32mp157c-dk2.dtb \
|
||||
stm32mp157c-ed1.dtb \
|
||||
stm32mp157c-emsbc-argon.dtb \
|
||||
stm32mp157c-ev1.dtb \
|
||||
stm32mp157c-lxa-mc1.dtb \
|
||||
stm32mp157c-odyssey.dtb
|
||||
|
|
|
@ -338,6 +338,47 @@ pins1 {
|
|||
};
|
||||
};
|
||||
|
||||
ethernet0_rmii_pins_b: rmii-1 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('B', 5, AF0)>, /* ETH1_CLK */
|
||||
<STM32_PINMUX('C', 1, AF11)>, /* ETH1_MDC */
|
||||
<STM32_PINMUX('G', 13, AF11)>, /* ETH1_TXD0 */
|
||||
<STM32_PINMUX('G', 14, AF11)>; /* ETH1_TXD1 */
|
||||
bias-disable;
|
||||
drive-push-pull;
|
||||
slew-rate = <1>;
|
||||
};
|
||||
pins2 {
|
||||
pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH1_MDIO */
|
||||
bias-disable;
|
||||
drive-push-pull;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
pins3 {
|
||||
pinmux = <STM32_PINMUX('A', 7, AF11)>, /* ETH1_CRS_DV */
|
||||
<STM32_PINMUX('C', 4, AF11)>, /* ETH1_RXD0 */
|
||||
<STM32_PINMUX('C', 5, AF11)>; /* ETH1_RXD1 */
|
||||
bias-disable;
|
||||
};
|
||||
pins4 {
|
||||
pinmux = <STM32_PINMUX('B', 11, AF11)>; /* ETH1_TX_EN */
|
||||
};
|
||||
};
|
||||
|
||||
ethernet0_rmii_sleep_pins_b: rmii-sleep-1 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */
|
||||
<STM32_PINMUX('A', 7, ANALOG)>, /* ETH1_CRS_DV */
|
||||
<STM32_PINMUX('B', 5, ANALOG)>, /* ETH1_CLK */
|
||||
<STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_TX_EN */
|
||||
<STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */
|
||||
<STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RXD0 */
|
||||
<STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RXD1 */
|
||||
<STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_TXD0 */
|
||||
<STM32_PINMUX('G', 14, ANALOG)>; /* ETH1_TXD1 */
|
||||
};
|
||||
};
|
||||
|
||||
fmc_pins_a: fmc-0 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
|
||||
|
@ -927,6 +968,21 @@ pins {
|
|||
};
|
||||
};
|
||||
|
||||
pwm1_pins_b: pwm1-1 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('E', 9, AF1)>; /* TIM1_CH1 */
|
||||
bias-pull-down;
|
||||
drive-push-pull;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm1_sleep_pins_b: pwm1-sleep-1 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('E', 9, ANALOG)>; /* TIM1_CH1 */
|
||||
};
|
||||
};
|
||||
|
||||
pwm2_pins_a: pwm2-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
|
||||
|
@ -2042,6 +2098,42 @@ pins {
|
|||
};
|
||||
};
|
||||
|
||||
usart3_pins_d: usart3-3 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
|
||||
<STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
|
||||
bias-disable;
|
||||
drive-push-pull;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
pins2 {
|
||||
pinmux = <STM32_PINMUX('D', 9, AF7)>, /* USART3_RX */
|
||||
<STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
usart3_idle_pins_d: usart3-idle-3 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
|
||||
<STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
|
||||
<STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */
|
||||
};
|
||||
pins2 {
|
||||
pinmux = <STM32_PINMUX('D', 9, AF7)>; /* USART3_RX */
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
usart3_sleep_pins_d: usart3-sleep-3 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
|
||||
<STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
|
||||
<STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */
|
||||
<STM32_PINMUX('D', 9, ANALOG)>; /* USART3_RX */
|
||||
};
|
||||
};
|
||||
|
||||
usbotg_hs_pins_a: usbotg-hs-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
|
||||
|
|
53
arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts
Normal file
53
arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts
Normal file
|
@ -0,0 +1,53 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 or MIT)
|
||||
//
|
||||
// Copyright (c) 2021 emtrion GmbH
|
||||
// Author: Reinhold Müller <reinhold.mueller@emtrion.de>.
|
||||
//
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157c-emstamp-argon.dtsi"
|
||||
|
||||
/ {
|
||||
model = "emtrion STM32MP157C emSBC-Argon Developer Board";
|
||||
compatible = "emtrion,stm32mp157c-emsbc-argon", "emtrion,stm32mp157c-emstamp-argon",
|
||||
"st,stm32mp157";
|
||||
|
||||
led: gpio_leds {
|
||||
compatible = "gpio-leds";
|
||||
led-2 {
|
||||
label = "red";
|
||||
gpios = <&gpiof 12 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "none";
|
||||
default-state = "off";
|
||||
};
|
||||
led-3 {
|
||||
label = "green";
|
||||
gpios = <&gpioe 7 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "none";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dac {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc1_b4_pins_a>;
|
||||
pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
|
||||
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
|
||||
cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
|
||||
disable-wp;
|
||||
st,neg-edge;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&vdd_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
552
arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
Normal file
552
arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
Normal file
|
@ -0,0 +1,552 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 or MIT)
|
||||
//
|
||||
// Copyright (c) 2021 emtrion GmbH
|
||||
// Author: Reinhold Müller <reinhold.mueller@emtrion.de>.
|
||||
//
|
||||
|
||||
#include "stm32mp157.dtsi"
|
||||
#include "stm32mp15xc.dtsi"
|
||||
#include "stm32mp15-pinctrl.dtsi"
|
||||
#include "stm32mp15xxac-pinctrl.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/mfd/st,stpmic1.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
ethernet0 = ðernet0;
|
||||
serial0 = &uart4;
|
||||
serial1 = &usart2;
|
||||
serial2 = &usart3;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@c0000000 {
|
||||
device_type = "memory";
|
||||
reg = <0xc0000000 0x20000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
mcuram2: mcuram2@10000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10000000 0x40000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0vring0: vdev0vring0@10040000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10040000 0x2000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0vring1: vdev0vring1@10042000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10042000 0x2000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0buffer: vdev0buffer@10044000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10044000 0x4000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mcuram: mcuram@30000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x30000000 0x40000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
retram: retram@38000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x38000000 0x10000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
gpu_reserved: gpu@dc000000 {
|
||||
reg = <0xdc000000 0x4000000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
led: gpio_leds {
|
||||
compatible = "gpio-leds";
|
||||
led-0 {
|
||||
label = "panic";
|
||||
gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "none";
|
||||
default-state = "off";
|
||||
panic-indicator;
|
||||
};
|
||||
led-1 {
|
||||
label = "heartbeat";
|
||||
gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adc {
|
||||
vdd-supply = <&vdd>;
|
||||
vdda-supply = <&vdd>;
|
||||
vref-supply = <&vrefbuf>;
|
||||
status = "okay";
|
||||
|
||||
adc1: adc@0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&adc1_in6_pins_a>;
|
||||
st,min-sample-time-nsecs = <5000>;
|
||||
st,adc-channels = <6>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
adc2: adc@100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
channel@12 {
|
||||
reg = <12>;
|
||||
label = "sense_temp";
|
||||
st,min-sample-time-ns = <9000>;
|
||||
};
|
||||
channel@15 {
|
||||
reg = <15>;
|
||||
label = "vbat";
|
||||
st,min-sample-time-ns = <9000>;
|
||||
};
|
||||
channel@16 {
|
||||
reg = <16>;
|
||||
label = "dac_out1";
|
||||
st,min-sample-time-ns = <9000>;
|
||||
};
|
||||
channel@17 {
|
||||
reg = <17>;
|
||||
label = "dac_out1";
|
||||
st,min-sample-time-ns = <9000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&crc1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cryp1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
|
||||
vref-supply = <&vdda>;
|
||||
status = "disabled";
|
||||
|
||||
dac1: dac@1 {
|
||||
status = "okay";
|
||||
};
|
||||
dac2: dac@2 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&dts {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet0 {
|
||||
status = "okay";
|
||||
snps,reset-gpio = <&gpioa 1 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 30000 50000>;
|
||||
pinctrl-0 = <ðernet0_rmii_pins_b>;
|
||||
pinctrl-1 = <ðernet0_rmii_sleep_pins_b>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
phy-mode = "rmii";
|
||||
max-speed = <100>;
|
||||
phy-handle = <&phy0>;
|
||||
st,eth-ref-clk-sel;
|
||||
|
||||
mdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
contiguous-area = <&gpu_reserved>;
|
||||
};
|
||||
|
||||
&hash1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c1_pins_a>;
|
||||
pinctrl-1 = <&i2c1_sleep_pins_a>;
|
||||
i2c-scl-rising-time-ns = <100>;
|
||||
i2c-scl-falling-time-ns = <7>;
|
||||
status = "disabled";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c4_pins_a>;
|
||||
pinctrl-1 = <&i2c4_sleep_pins_a>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
|
||||
pmic: stpmic@33 {
|
||||
compatible = "st,stpmic1";
|
||||
reg = <0x33>;
|
||||
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
status = "okay";
|
||||
|
||||
regulators {
|
||||
compatible = "st,stpmic1-regulators";
|
||||
|
||||
ldo1-supply = <&v3v3>;
|
||||
ldo3-supply = <&vdd_ddr>;
|
||||
ldo6-supply = <&v3v3>;
|
||||
pwr_sw1-supply = <&bst_out>;
|
||||
pwr_sw2-supply = <&bst_out>;
|
||||
|
||||
vddcore: buck1 {
|
||||
regulator-name = "vddcore";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_ddr: buck2 {
|
||||
regulator-name = "vdd_ddr";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd: buck3 {
|
||||
regulator-name = "vdd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
st,mask-reset;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
v3v3: buck4 {
|
||||
regulator-name = "v3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
regulator-initial-mode = <0>;
|
||||
};
|
||||
|
||||
v1v8_audio: ldo1 {
|
||||
regulator-name = "v1v8_audio";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
interrupts = <IT_CURLIM_LDO1 0>;
|
||||
};
|
||||
|
||||
v3v3_hdmi: ldo2 {
|
||||
regulator-name = "v3v3_hdmi";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
interrupts = <IT_CURLIM_LDO2 0>;
|
||||
};
|
||||
|
||||
vtt_ddr: ldo3 {
|
||||
regulator-name = "vtt_ddr";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_usb: ldo4 {
|
||||
regulator-name = "vdd_usb";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
interrupts = <IT_CURLIM_LDO4 0>;
|
||||
};
|
||||
|
||||
vdd_sd: ldo5 {
|
||||
regulator-name = "vdd_sd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
interrupts = <IT_CURLIM_LDO5 0>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdda: ldo6 {
|
||||
regulator-name = "vdda";
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
regulator-always-on;
|
||||
interrupts = <IT_CURLIM_LDO6 0>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vref_ddr: vref_ddr {
|
||||
regulator-name = "vref_ddr";
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
bst_out: boost {
|
||||
regulator-name = "bst_out";
|
||||
interrupts = <IT_OCP_BOOST 0>;
|
||||
};
|
||||
|
||||
vbus_otg: pwr_sw1 {
|
||||
regulator-name = "vbus_otg";
|
||||
interrupts = <IT_OCP_OTG 0>;
|
||||
regulator-active-discharge;
|
||||
};
|
||||
|
||||
vbus_usbh: pwr_sw2 {
|
||||
regulator-name = "usbh_vbus";
|
||||
interrupts = <IT_OCP_SWOUT 0>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
onkey {
|
||||
compatible = "st,stpmic1-onkey";
|
||||
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
|
||||
interrupt-names = "onkey-falling", "onkey-rising";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "st,stpmic1-wdt";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c5_pins_a>;
|
||||
pinctrl-1 = <&i2c5_sleep_pins_a>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
};
|
||||
|
||||
&ipcc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iwdg2 {
|
||||
timeout-sec = <32>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&m4_rproc {
|
||||
memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
|
||||
<&vdev0vring1>, <&vdev0buffer>;
|
||||
mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
|
||||
mbox-names = "vq0", "vq1", "shutdown";
|
||||
interrupt-parent = <&exti>;
|
||||
interrupts = <68 1>;
|
||||
interrupt-names = "wdg";
|
||||
recovery;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwr_regulators {
|
||||
vdd-supply = <&vdd>;
|
||||
vdd_3v3_usbfs-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&qspi {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
|
||||
pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
|
||||
reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
flash0: is25lp016d@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <133000000>;
|
||||
spi-rx-bus-width = <1>;
|
||||
spi-tx-bus-width = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&rng1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc2 {
|
||||
arm,primecell-periphid = <0x10153180>;
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc2_b4_pins_b>;
|
||||
pinctrl-1 = <&sdmmc2_b4_od_pins_b>;
|
||||
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
|
||||
non-removable;
|
||||
st,neg-edge;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&v3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi1_pins_a>;
|
||||
cs-gpios = <&gpioz 3 0>;
|
||||
status = "disabled";
|
||||
|
||||
spidev@0 {
|
||||
compatible = "spidev";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <100000>;
|
||||
};
|
||||
};
|
||||
|
||||
&timers1 {
|
||||
/* spare dmas for other usage */
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm1_pins_b>;
|
||||
pinctrl-1 = <&pwm1_sleep_pins_b>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&timers4 {
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm4_pins_b>;
|
||||
pinctrl-1 = <&pwm4_sleep_pins_b>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@3 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&timers5 {
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm5_pins_a>;
|
||||
pinctrl-1 = <&pwm5_sleep_pins_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@4 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default", "sleep", "idle";
|
||||
pinctrl-0 = <&uart4_pins_a>;
|
||||
pinctrl-1 = <&uart4_sleep_pins_a>;
|
||||
pinctrl-2 = <&uart4_idle_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart2 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&usart2_pins_a>;
|
||||
pinctrl-1 = <&usart2_sleep_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart3 {
|
||||
pinctrl-names = "default", "sleep", "idle";
|
||||
pinctrl-0 = <&usart3_pins_d>;
|
||||
pinctrl-1 = <&usart3_sleep_pins_d>;
|
||||
pinctrl-2 = <&usart3_idle_pins_d>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh_ehci {
|
||||
phys = <&usbphyc_port0>;
|
||||
phy-names = "usb";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh_ohci {
|
||||
phys = <&usbphyc_port0>;
|
||||
phy-names = "usb";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg_hs {
|
||||
dr_mode = "peripheral";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usbotg_hs_pins_a>;
|
||||
phy-names = "usb2-phy";
|
||||
phys = <&usbphyc_port1 0>;
|
||||
vbus-supply = <&vbus_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphyc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphyc_port0 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&usbphyc_port1 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&vrefbuf {
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
vdda-supply = <&vdd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
Loading…
Reference in a new issue