mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 19:29:37 +00:00
mtd: spi-nor: use 16-bit WRR command when QE is set on spansion flashes
SPI memory devices from different manufacturers have widely different configurations for Status, Control and Configuration registers. JEDEC 216C defines a new map for these common register bits and their functions, and describes how the individual bits may be accessed for a specific device. For the JEDEC 216B compliant flashes, we can partially deduce Status and Configuration registers functions by inspecting the 16th DWORD of BFPT. Older flashes that don't declare the SFDP tables (SPANSION FL512SAIFG1 311QQ063 A ©11 SPANSION) let the software decide how to interact with these registers. The commitdcb4b22eea
("spi-nor: s25fl512s supports region locking") uncovered a probe error for s25fl512s, when the Quad Enable bit CR[1] was set to one in the bootloader. When this bit is one, only the Write Status (01h) command with two data byts may be used, the 01h command with one data byte is not recognized and hence the error when trying to clear the block protection bits. Fix the above by using the Write Status (01h) command with two data bytes when the Quad Enable bit is one. Backward compatibility should be fine. The newly introduced spi_nor_spansion_clear_sr_bp() is tightly coupled with the spansion_quad_enable() function. Both assume that the Write Register with 16 bits, together with the Read Configuration Register (35h) instructions are supported. Fixes:dcb4b22eea
("spi-nor: s25fl512s supports region locking") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Jonas Bonn <jonas@norrbonn.se> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Tested-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
This commit is contained in:
parent
b2b5921fe4
commit
191f5c2ed4
2 changed files with 111 additions and 11 deletions
|
@ -1636,6 +1636,95 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
|
|||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* spi_nor_clear_sr_bp() - clear the Status Register Block Protection bits.
|
||||
* @nor: pointer to a 'struct spi_nor'
|
||||
*
|
||||
* Read-modify-write function that clears the Block Protection bits from the
|
||||
* Status Register without affecting other bits.
|
||||
*
|
||||
* Return: 0 on success, -errno otherwise.
|
||||
*/
|
||||
static int spi_nor_clear_sr_bp(struct spi_nor *nor)
|
||||
{
|
||||
int ret;
|
||||
u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
|
||||
|
||||
ret = read_sr(nor);
|
||||
if (ret < 0) {
|
||||
dev_err(nor->dev, "error while reading status register\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
write_enable(nor);
|
||||
|
||||
ret = write_sr(nor, ret & ~mask);
|
||||
if (ret) {
|
||||
dev_err(nor->dev, "write to status register failed\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = spi_nor_wait_till_ready(nor);
|
||||
if (ret)
|
||||
dev_err(nor->dev, "timeout while writing status register\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* spi_nor_spansion_clear_sr_bp() - clear the Status Register Block Protection
|
||||
* bits on spansion flashes.
|
||||
* @nor: pointer to a 'struct spi_nor'
|
||||
*
|
||||
* Read-modify-write function that clears the Block Protection bits from the
|
||||
* Status Register without affecting other bits. The function is tightly
|
||||
* coupled with the spansion_quad_enable() function. Both assume that the Write
|
||||
* Register with 16 bits, together with the Read Configuration Register (35h)
|
||||
* instructions are supported.
|
||||
*
|
||||
* Return: 0 on success, -errno otherwise.
|
||||
*/
|
||||
static int spi_nor_spansion_clear_sr_bp(struct spi_nor *nor)
|
||||
{
|
||||
int ret;
|
||||
u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
|
||||
u8 sr_cr[2] = {0};
|
||||
|
||||
/* Check current Quad Enable bit value. */
|
||||
ret = read_cr(nor);
|
||||
if (ret < 0) {
|
||||
dev_err(nor->dev,
|
||||
"error while reading configuration register\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* When the configuration register Quad Enable bit is one, only the
|
||||
* Write Status (01h) command with two data bytes may be used.
|
||||
*/
|
||||
if (ret & CR_QUAD_EN_SPAN) {
|
||||
sr_cr[1] = ret;
|
||||
|
||||
ret = read_sr(nor);
|
||||
if (ret < 0) {
|
||||
dev_err(nor->dev,
|
||||
"error while reading status register\n");
|
||||
return ret;
|
||||
}
|
||||
sr_cr[0] = ret & ~mask;
|
||||
|
||||
ret = write_sr_cr(nor, sr_cr);
|
||||
if (ret)
|
||||
dev_err(nor->dev, "16-bit write register failed\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* If the Quad Enable bit is zero, use the Write Status (01h) command
|
||||
* with one data byte.
|
||||
*/
|
||||
return spi_nor_clear_sr_bp(nor);
|
||||
}
|
||||
|
||||
/* Used when the "_ext_id" is two bytes at most */
|
||||
#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
|
||||
.id = { \
|
||||
|
@ -3660,6 +3749,8 @@ static int spi_nor_init_params(struct spi_nor *nor,
|
|||
default:
|
||||
/* Kept only for backward compatibility purpose. */
|
||||
params->quad_enable = spansion_quad_enable;
|
||||
if (nor->clear_sr_bp)
|
||||
nor->clear_sr_bp = spi_nor_spansion_clear_sr_bp;
|
||||
break;
|
||||
}
|
||||
|
||||
|
@ -3912,17 +4003,13 @@ static int spi_nor_init(struct spi_nor *nor)
|
|||
{
|
||||
int err;
|
||||
|
||||
/*
|
||||
* Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
|
||||
* with the software protection bits set
|
||||
*/
|
||||
if (JEDEC_MFR(nor->info) == SNOR_MFR_ATMEL ||
|
||||
JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
|
||||
JEDEC_MFR(nor->info) == SNOR_MFR_SST ||
|
||||
nor->info->flags & SPI_NOR_HAS_LOCK) {
|
||||
write_enable(nor);
|
||||
write_sr(nor, 0);
|
||||
spi_nor_wait_till_ready(nor);
|
||||
if (nor->clear_sr_bp) {
|
||||
err = nor->clear_sr_bp(nor);
|
||||
if (err) {
|
||||
dev_err(nor->dev,
|
||||
"fail to clear block protection bits\n");
|
||||
return err;
|
||||
}
|
||||
}
|
||||
|
||||
if (nor->quad_enable) {
|
||||
|
@ -4047,6 +4134,16 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
|
|||
if (info->flags & SPI_S3AN)
|
||||
nor->flags |= SNOR_F_READY_XSR_RDY;
|
||||
|
||||
/*
|
||||
* Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
|
||||
* with the software protection bits set.
|
||||
*/
|
||||
if (JEDEC_MFR(nor->info) == SNOR_MFR_ATMEL ||
|
||||
JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
|
||||
JEDEC_MFR(nor->info) == SNOR_MFR_SST ||
|
||||
nor->info->flags & SPI_NOR_HAS_LOCK)
|
||||
nor->clear_sr_bp = spi_nor_clear_sr_bp;
|
||||
|
||||
/* Parse the Serial Flash Discoverable Parameters table. */
|
||||
ret = spi_nor_init_params(nor, ¶ms);
|
||||
if (ret)
|
||||
|
|
|
@ -373,6 +373,8 @@ struct flash_info;
|
|||
* @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR
|
||||
* @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is
|
||||
* @quad_enable: [FLASH-SPECIFIC] enables SPI NOR quad mode
|
||||
* @clear_sr_bp: [FLASH-SPECIFIC] clears the Block Protection Bits from
|
||||
* the SPI NOR Status Register.
|
||||
* completely locked
|
||||
* @priv: the private data
|
||||
*/
|
||||
|
@ -410,6 +412,7 @@ struct spi_nor {
|
|||
int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
|
||||
int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
|
||||
int (*quad_enable)(struct spi_nor *nor);
|
||||
int (*clear_sr_bp)(struct spi_nor *nor);
|
||||
|
||||
void *priv;
|
||||
};
|
||||
|
|
Loading…
Reference in a new issue