stmmac: enable/disable rx/tx in the core with a single write.

This patch enables and disables the rx and tx bits in the MAC control reg
by using a single write operation.
This also solves a possible problem (spotted on SPEAr platforms) at 10Mbps
where two consecutive writes to a MAC control register can take more than
4 phy_clk cycles.

Signed-off-by: Armando Visconti <armando.visconti@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
avisconti 2010-10-25 18:58:14 +00:00 committed by David S. Miller
parent d1abc9a9ac
commit 19449bfc10
1 changed files with 11 additions and 31 deletions

View File

@ -337,33 +337,19 @@ static int stmmac_init_phy(struct net_device *dev)
return 0;
}
static inline void stmmac_mac_enable_rx(void __iomem *ioaddr)
static inline void stmmac_enable_mac(void __iomem *ioaddr)
{
u32 value = readl(ioaddr + MAC_CTRL_REG);
value |= MAC_RNABLE_RX;
/* Set the RE (receive enable bit into the MAC CTRL register). */
value |= MAC_RNABLE_RX | MAC_ENABLE_TX;
writel(value, ioaddr + MAC_CTRL_REG);
}
static inline void stmmac_mac_enable_tx(void __iomem *ioaddr)
static inline void stmmac_disable_mac(void __iomem *ioaddr)
{
u32 value = readl(ioaddr + MAC_CTRL_REG);
value |= MAC_ENABLE_TX;
/* Set the TE (transmit enable bit into the MAC CTRL register). */
writel(value, ioaddr + MAC_CTRL_REG);
}
static inline void stmmac_mac_disable_rx(void __iomem *ioaddr)
{
u32 value = readl(ioaddr + MAC_CTRL_REG);
value &= ~MAC_RNABLE_RX;
writel(value, ioaddr + MAC_CTRL_REG);
}
static inline void stmmac_mac_disable_tx(void __iomem *ioaddr)
{
u32 value = readl(ioaddr + MAC_CTRL_REG);
value &= ~MAC_ENABLE_TX;
value &= ~(MAC_ENABLE_TX | MAC_RNABLE_RX);
writel(value, ioaddr + MAC_CTRL_REG);
}
@ -857,8 +843,7 @@ static int stmmac_open(struct net_device *dev)
writel(0xffffffff, priv->ioaddr + MMC_LOW_INTR_MASK);
/* Enable the MAC Rx/Tx */
stmmac_mac_enable_rx(priv->ioaddr);
stmmac_mac_enable_tx(priv->ioaddr);
stmmac_enable_mac(priv->ioaddr);
/* Set the HW DMA mode and the COE */
stmmac_dma_operation_mode(priv);
@ -928,9 +913,8 @@ static int stmmac_release(struct net_device *dev)
/* Release and free the Rx/Tx resources */
free_dma_desc_resources(priv);
/* Disable the MAC core */
stmmac_mac_disable_tx(priv->ioaddr);
stmmac_mac_disable_rx(priv->ioaddr);
/* Disable the MAC Rx/Tx */
stmmac_disable_mac(priv->ioaddr);
netif_carrier_off(dev);
@ -1787,8 +1771,7 @@ static int stmmac_dvr_remove(struct platform_device *pdev)
priv->hw->dma->stop_rx(priv->ioaddr);
priv->hw->dma->stop_tx(priv->ioaddr);
stmmac_mac_disable_rx(priv->ioaddr);
stmmac_mac_disable_tx(priv->ioaddr);
stmmac_disable_mac(priv->ioaddr);
netif_carrier_off(ndev);
@ -1839,13 +1822,11 @@ static int stmmac_suspend(struct platform_device *pdev, pm_message_t state)
dis_ic);
priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
stmmac_mac_disable_tx(priv->ioaddr);
/* Enable Power down mode by programming the PMT regs */
if (device_can_wakeup(priv->device))
priv->hw->mac->pmt(priv->ioaddr, priv->wolopts);
else
stmmac_mac_disable_rx(priv->ioaddr);
stmmac_disable_mac(priv->ioaddr);
} else {
priv->shutdown = 1;
/* Although this can appear slightly redundant it actually
@ -1886,8 +1867,7 @@ static int stmmac_resume(struct platform_device *pdev)
netif_device_attach(dev);
/* Enable the MAC and DMA */
stmmac_mac_enable_rx(priv->ioaddr);
stmmac_mac_enable_tx(priv->ioaddr);
stmmac_enable_mac(priv->ioaddr);
priv->hw->dma->start_tx(priv->ioaddr);
priv->hw->dma->start_rx(priv->ioaddr);