diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 1bd71a598c79..eee5115658c8 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -59,7 +59,7 @@
  *	The AG-AND chips have nice features for speed improvement,
  *	which are not supported yet. Read / program 4 pages in one go.
  *
- * $Id: nand_base.c,v 1.146 2005/06/17 15:02:06 gleixner Exp $
+ * $Id: nand_base.c,v 1.147 2005/07/15 07:18:06 gleixner Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -1409,16 +1409,6 @@ static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t
 		thislen = min_t(int, thislen, len);
 		this->read_buf(mtd, &buf[i], thislen);
 		i += thislen;
-		
-		/* Apply delay or wait for ready/busy pin 
-		 * Do this before the AUTOINCR check, so no problems
-		 * arise if a chip which does auto increment
-		 * is marked as NOAUTOINCR by the board driver.
-		*/
-		if (!this->dev_ready) 
-			udelay (this->chip_delay);
-		else
-			nand_wait_ready(mtd);
 
 		/* Read more ? */
 		if (i < len) {
@@ -1432,6 +1422,16 @@ static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t
 				this->select_chip(mtd, chipnr);
 			}
 				
+			/* Apply delay or wait for ready/busy pin 
+			 * Do this before the AUTOINCR check, so no problems
+			 * arise if a chip which does auto increment
+			 * is marked as NOAUTOINCR by the board driver.
+			 */
+			if (!this->dev_ready) 
+				udelay (this->chip_delay);
+			else
+				nand_wait_ready(mtd);
+
 			/* Check, if the chip supports auto page increment 
 			 * or if we have hit a block boundary. 
 			*/ 
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 5ac2d2962220..7535ef53685e 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -6,7 +6,7 @@
  *   
  *  Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
  *
- * $Id: nand_bbt.c,v 1.33 2005/06/14 15:47:56 gleixner Exp $
+ * $Id: nand_bbt.c,v 1.35 2005/07/15 13:53:47 gleixner Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -109,24 +109,21 @@ static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_des
 /** 
  * check_short_pattern - [GENERIC] check if a pattern is in the buffer
  * @buf:	the buffer to search
- * @len:	the length of buffer to search
- * @paglen:	the pagelength
  * @td:		search pattern descriptor
  *
  * Check for a pattern at the given place. Used to search bad block
  * tables and good / bad block identifiers. Same as check_pattern, but 
- * no optional empty check and the pattern is expected to start
- * at offset 0.
+ * no optional empty check
  *
 */
-static int check_short_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
+static int check_short_pattern (uint8_t *buf, struct nand_bbt_descr *td)
 {
 	int i;
 	uint8_t *p = buf;
 
 	/* Compare the pattern */
 	for (i = 0; i < td->len; i++) {
-		if (p[i] != td->pattern[i])
+		if (p[td->offs + i] != td->pattern[i])
 			return -1;
 	}
 	return 0;
@@ -337,13 +334,14 @@ static int create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 			if (!(bd->options & NAND_BBT_SCANEMPTY)) {
 				size_t retlen;
 				
-				/* No need to read pages fully, just read required OOB bytes */
-				ret = mtd->read_oob(mtd, from + j * mtd->oobblock + bd->offs,
-							readlen, &retlen, &buf[0]);
+				/* Read the full oob until read_oob is fixed to 
+				 * handle single byte reads for 16 bit buswidth */
+				ret = mtd->read_oob(mtd, from + j * mtd->oobblock,
+							mtd->oobsize, &retlen, buf);
 				if (ret)
 					return ret;
 
-				if (check_short_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) {
+				if (check_short_pattern (buf, bd)) {
 					this->bbt[i >> 3] |= 0x03 << (i & 0x6);
 					printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n", 
 						i >> 1, (unsigned int) from);