[PATCH] fuse: clean up request size limit checking

Change the way a too large request is handled.  Until now in this case the
device read returned -EINVAL and the operation returned -EIO.

Make it more flexibible by not returning -EINVAL from the read, but restarting
it instead.

Also remove the fixed limit on setxattr data and let the filesystem provide as
large a read buffer as it needs to handle the extended attribute data.

The symbolic link length is already checked by VFS to be less than PATH_MAX,
so the extra check against FUSE_SYMLINK_MAX is not needed.

The check in fuse_create_open() against FUSE_NAME_MAX is not needed, since the
dentry has already been looked up, and hence the name already checked.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Miklos Szeredi 2006-01-06 00:19:40 -08:00 committed by Linus Torvalds
parent 248d86e87d
commit 1d3d752b47
5 changed files with 26 additions and 33 deletions

View file

@ -617,6 +617,7 @@ static ssize_t fuse_dev_readv(struct file *file, const struct iovec *iov,
struct fuse_copy_state cs;
unsigned reqsize;
restart:
spin_lock(&fuse_lock);
fc = file->private_data;
err = -EPERM;
@ -632,20 +633,25 @@ static ssize_t fuse_dev_readv(struct file *file, const struct iovec *iov,
req = list_entry(fc->pending.next, struct fuse_req, list);
list_del_init(&req->list);
spin_unlock(&fuse_lock);
in = &req->in;
reqsize = req->in.h.len;
fuse_copy_init(&cs, 1, req, iov, nr_segs);
err = -EINVAL;
if (iov_length(iov, nr_segs) >= reqsize) {
err = fuse_copy_one(&cs, &in->h, sizeof(in->h));
if (!err)
err = fuse_copy_args(&cs, in->numargs, in->argpages,
(struct fuse_arg *) in->args, 0);
reqsize = in->h.len;
/* If request is too large, reply with an error and restart the read */
if (iov_length(iov, nr_segs) < reqsize) {
req->out.h.error = -EIO;
/* SETXATTR is special, since it may contain too large data */
if (in->h.opcode == FUSE_SETXATTR)
req->out.h.error = -E2BIG;
request_end(fc, req);
goto restart;
}
spin_unlock(&fuse_lock);
fuse_copy_init(&cs, 1, req, iov, nr_segs);
err = fuse_copy_one(&cs, &in->h, sizeof(in->h));
if (!err)
err = fuse_copy_args(&cs, in->numargs, in->argpages,
(struct fuse_arg *) in->args, 0);
fuse_copy_finish(&cs);
spin_lock(&fuse_lock);
req->locked = 0;
if (!err && req->interrupted)

View file

@ -236,10 +236,6 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, int mode,
if (fc->no_create)
goto out;
err = -ENAMETOOLONG;
if (entry->d_name.len > FUSE_NAME_MAX)
goto out;
err = -EINTR;
req = fuse_get_request(fc);
if (!req)
@ -413,12 +409,7 @@ static int fuse_symlink(struct inode *dir, struct dentry *entry,
{
struct fuse_conn *fc = get_fuse_conn(dir);
unsigned len = strlen(link) + 1;
struct fuse_req *req;
if (len > FUSE_SYMLINK_MAX)
return -ENAMETOOLONG;
req = fuse_get_request(fc);
struct fuse_req *req = fuse_get_request(fc);
if (!req)
return -EINTR;
@ -988,9 +979,6 @@ static int fuse_setxattr(struct dentry *entry, const char *name,
struct fuse_setxattr_in inarg;
int err;
if (size > FUSE_XATTR_SIZE_MAX)
return -E2BIG;
if (fc->no_setxattr)
return -EOPNOTSUPP;

View file

@ -21,6 +21,12 @@
/** If more requests are outstanding, then the operation will block */
#define FUSE_MAX_OUTSTANDING 10
/** Maximum size of data in a write request */
#define FUSE_MAX_WRITE 4096
/** It could be as large as PATH_MAX, but would that have any uses? */
#define FUSE_NAME_MAX 1024
/** If the FUSE_DEFAULT_PERMISSIONS flag is given, the filesystem
module will check permissions based on the file mode. Otherwise no
permission checking is done in the kernel */
@ -108,9 +114,6 @@ struct fuse_out {
struct fuse_arg args[3];
};
struct fuse_req;
struct fuse_conn;
/**
* A request to the client
*/

View file

@ -485,7 +485,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
fc->max_read = d.max_read;
if (fc->max_read / PAGE_CACHE_SIZE < fc->bdi.ra_pages)
fc->bdi.ra_pages = fc->max_read / PAGE_CACHE_SIZE;
fc->max_write = FUSE_MAX_IN / 2;
fc->max_write = FUSE_MAX_WRITE;
err = -ENOMEM;
root = get_root_inode(sb, d.rootmode);

View file

@ -108,12 +108,8 @@ enum fuse_opcode {
FUSE_CREATE = 35
};
/* Conservative buffer size for the client */
#define FUSE_MAX_IN 8192
#define FUSE_NAME_MAX 1024
#define FUSE_SYMLINK_MAX 4096
#define FUSE_XATTR_SIZE_MAX 4096
/* The read buffer is required to be at least 8k, but may be much larger */
#define FUSE_MIN_READ_BUFFER 8192
struct fuse_entry_out {
__u64 nodeid; /* Inode ID */