mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-29 23:53:32 +00:00
Code Issues Releases Wiki Activity

Merge branch 'r8152-autoresume'

Browse source 
Hayes Wang says:

====================
r8152: fix the autoresume may fail

Fix the autosuspend issues which occur about linking change.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2015-09-09 20:27:54 -07:00
commit 1d68c28638
1 changed files with 63 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

66
drivers/net/usb/r8152.c
View file

@ -26,8 +26,13 @@
#include <linux/mdio.h>
#include <linux/usb/cdc.h>
/* Version Information */
#define DRIVER_VERSION "v1.08.1 (2015/07/28)"
/* Information for net-next */
#define NETNEXT_VERSION "08"
/* Information for net */
#define NET_VERSION "2"
#define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION
#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
#define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
#define MODULENAME "r8152"
@ -143,6 +148,7 @@
#define OCP_EEE_ABLE 0xa5c4
#define OCP_EEE_ADV 0xa5d0
#define OCP_EEE_LPABLE 0xa5d2
#define OCP_PHY_STATE 0xa708 /* nway state for 8153 */
#define OCP_ADC_CFG 0xbc06
/* SRAM Register */
@ -427,6 +433,10 @@
/* OCP_DOWN_SPEED */
#define EN_10M_BGOFF 0x0080
/* OCP_PHY_STATE */
#define TXDIS_STATE 0x01
#define ABD_STATE 0x02
/* OCP_ADC_CFG */
#define CKADSEL_L 0x0100
#define ADC_EN 0x0080
@ -604,6 +614,7 @@ struct r8152 {
void (*unload)(struct r8152 *);
int (*eee_get)(struct r8152 *, struct ethtool_eee *);
int (*eee_set)(struct r8152 *, struct ethtool_eee *);
bool (*in_nway)(struct r8152 *);
} rtl_ops;
int intr_interval;
@ -2941,6 +2952,32 @@ static void rtl8153_down(struct r8152 *tp)
r8153_enable_aldps(tp);
}
static bool rtl8152_in_nway(struct r8152 *tp)
{
u16 nway_state;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, 0x2000);
tp->ocp_base = 0x2000;
ocp_write_byte(tp, MCU_TYPE_PLA, 0xb014, 0x4c); /* phy state */
nway_state = ocp_read_word(tp, MCU_TYPE_PLA, 0xb01a);
/* bit 15: TXDIS_STATE, bit 14: ABD_STATE */
if (nway_state & 0xc000)
return false;
else
return true;
}
static bool rtl8153_in_nway(struct r8152 *tp)
{
u16 phy_state = ocp_reg_read(tp, OCP_PHY_STATE) & 0xff;
if (phy_state == TXDIS_STATE || phy_state == ABD_STATE)
return false;
else
return true;
}
static void set_carrier(struct r8152 *tp)
{
struct net_device *netdev = tp->netdev;
@ -3405,6 +3442,27 @@ static int rtl8152_post_reset(struct usb_interface *intf)
return 0;
}
static bool delay_autosuspend(struct r8152 *tp)
{
bool sw_linking = !!netif_carrier_ok(tp->netdev);
bool hw_linking = !!(rtl8152_get_speed(tp) & LINK_STATUS);
/* This means a linking change occurs and the driver doesn't detect it,
* yet. If the driver has disabled tx/rx and hw is linking on, the
* device wouldn't wake up by receiving any packet.
*/
if (work_busy(&tp->schedule.work) || sw_linking != hw_linking)
return true;
/* If the linking down is occurred by nway, the device may miss the
* linking change event. And it wouldn't wake when linking on.
*/
if (!sw_linking && tp->rtl_ops.in_nway(tp))
return true;
else
return false;
}
static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
{
struct r8152 *tp = usb_get_intfdata(intf);
@ -3414,7 +3472,7 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
mutex_lock(&tp->control);
if (PMSG_IS_AUTO(message)) {
if (netif_running(netdev) && work_busy(&tp->schedule.work)) {
if (netif_running(netdev) && delay_autosuspend(tp)) {
ret = -EBUSY;
goto out1;
}
@ -4044,6 +4102,7 @@ static int rtl_ops_init(struct r8152 *tp)
ops->unload = rtl8152_unload;
ops->eee_get = r8152_get_eee;
ops->eee_set = r8152_set_eee;
ops->in_nway = rtl8152_in_nway;
break;
case RTL_VER_03:
@ -4058,6 +4117,7 @@ static int rtl_ops_init(struct r8152 *tp)
ops->unload = rtl8153_unload;
ops->eee_get = r8153_get_eee;
ops->eee_set = r8153_set_eee;
ops->in_nway = rtl8153_in_nway;
break;
default: