Merge series "Tegra186 and Tegra194 audio graph card" from Sameer Pujar <spujar@nvidia.com>:

This series adds support for audio graph based solution on Tegra186 and
Tegra194. This enables audio paths for I2S, DMIC and DSPK modules.

Depending on the platform Jetson TX2 or Jetson AGX Xavier, required I/O
module instances are enabled. Since the latter board has on board audio
codec, DT support for the same is enabled and external audio playback and
capture can be used.

Changelog
=========

v1 --> v2:
----------
  - Dropped patch "ASoC: tegra: Select SND_SOC_RT5659" as per suggestion
    from Mark.
  - Add new patch "ASoC: rt5659: Add Kconfig prompt"
  - Add new patch "arm64: defconfig: Enable RT5659"
  - No changes in other patches from earlier series.

Sameer Pujar (9):
  ASoC: dt-bindings: rt5659: Update binding doc
  ASoC: dt-bindings: tegra: Add iommus property to Tegra graph card
  ASoC: audio-graph-card: Add clocks property to endpoint node
  ASoC: rt5659: Add Kconfig prompt
  arm64: defconfig: Enable RT5659
  arm64: tegra: Add RT5658 device entry
  Revert "arm64: tegra: Disable the ACONNECT for Jetson TX2"
  arm64: tegra: Audio graph sound card for Jetson TX2
  arm64: tegra: Audio graph sound card for Jetson AGX Xavier

 .../bindings/sound/audio-graph-port.yaml           |   3 +
 .../sound/nvidia,tegra-audio-graph-card.yaml       |   3 +
 Documentation/devicetree/bindings/sound/rt5659.txt |  11 +
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 609 +++++++++++++++++++++
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           |  22 +
 arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 468 ++++++++++++++++
 arch/arm64/boot/dts/nvidia/tegra194.dtsi           |  20 +
 arch/arm64/configs/defconfig                       |   1 +
 sound/soc/codecs/Kconfig                           |   2 +-
 9 files changed, 1138 insertions(+), 1 deletion(-)

--
2.7.4

Documentation/devicetree/bindings/sound/audio-graph-port.yaml

@@ -33,6 +33,9 @@ properties:
         properties:
           remote-endpoint:
             maxItems: 1
+          clocks:
+            maxItems: 1
+            description: Describes the clock used by audio component.
           mclk-fs:
             description: |
               Multiplication factor between stream rate and codec mclk.

Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml

@@ -45,6 +45,9 @@ properties:
     minItems: 1
     maxItems: 3
 
+  iommus:
+    maxItems: 1
+
 required:
   - clocks
   - clock-names

Documentation/devicetree/bindings/sound/rt5659.txt

@@ -37,10 +37,21 @@ Optional properties:
 - realtek,jd-src
   0: No JD is used
   1: using JD3 as JD source
+  2: JD source for Intel HDA header
 
 - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
 - realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
 
+- sound-name-prefix: Please refer to name-prefix.txt
+
+- ports: A Codec may have a single or multiple I2S interfaces. These
+  interfaces on Codec side can be described under 'ports' or 'port'.
+  When the SoC or host device is connected to multiple interfaces of
+  the Codec, the connectivity can be described using 'ports' property.
+  If a single interface is used, then 'port' can be used. The usage
+  depends on the platform or board design.
+  Please refer to Documentation/devicetree/bindings/graph.txt
+
 Pins on the device (for linking into audio routes) for RT5659/RT5658:
 
   * DMIC L1

sound/soc/codecs/Kconfig

@@ -1162,7 +1162,7 @@ config SND_SOC_RT5651
 	depends on I2C
 
 config SND_SOC_RT5659
-	tristate
+	tristate "Realtek RT5658/RT5659 Codec"
 	depends on I2C
 
 config SND_SOC_RT5660