MIPS: bcm963xx: Move extended flash address to bcm_tag header file

The extended flash address needs to be subtracted from bcm_tag flash
image offsets. Move this value to the bcm_tag header file.

Renamed define name to consistently use bcm963xx for flash layout
which should be considered a property of the board and not the SoC
(i.e. bcm63xx could theoretically be used on a board without CFE
or any flash).

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: MIPS Mailing List <linux-mips@linux-mips.org>
Cc: MTD Maling List <linux-mtd@lists.infradead.org>
Patchwork: https://patchwork.linux-mips.org/patch/11833/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Simon Arlott 2015-12-13 22:47:55 +00:00 committed by Ralf Baechle
parent 8fce60b8d0
commit 1f29cb19cb
2 changed files with 7 additions and 4 deletions

View File

@ -37,8 +37,6 @@
#include <asm/mach-bcm63xx/bcm63xx_nvram.h>
#include <asm/mach-bcm63xx/board_bcm963xx.h>
#define BCM63XX_EXTENDED_SIZE 0xBFC00000 /* Extended flash address */
#define BCM63XX_CFE_BLOCK_SIZE SZ_64K /* always at least 64KiB */
#define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
@ -123,8 +121,8 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
pr_info("CFE boot tag found with version %s and board type %s\n",
tagversion, boardid);
kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
rootfsaddr = rootfsaddr - BCM63XX_EXTENDED_SIZE;
kerneladdr = kerneladdr - BCM963XX_EXTENDED_SIZE;
rootfsaddr = rootfsaddr - BCM963XX_EXTENDED_SIZE;
spareaddr = roundup(totallen, master->erasesize) + cfelen;
if (rootfsaddr < kerneladdr) {

View File

@ -28,6 +28,11 @@
"DWV-S0", \
}
/* Extended flash address, needs to be subtracted
* from bcm_tag flash image offsets.
*/
#define BCM963XX_EXTENDED_SIZE 0xBFC00000
/*
* The broadcom firmware assumes the rootfs starts the image,
* therefore uses the rootfs start (flash_image_address)