ARM: dts: BCM5301X: Add DT for Luxul XBR-4500

This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
board design.

Signed-off-by: Dan Haab <dhaab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This commit is contained in:
Dan Haab 2017-10-09 09:46:22 -06:00 committed by Florian Fainelli
parent 2460266f21
commit 1f4b0d5596
2 changed files with 64 additions and 0 deletions

View File

@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \

View File

@ -0,0 +1,63 @@
/*
* Copyright (C) 2017 Luxul Inc.
*
* Licensed under the ISC license.
*/
/dts-v1/;
#include "bcm4708.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
model = "Luxul XBR-4500 V1";
chosen {
bootargs = "earlycon";
};
memory {
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
};
leds {
compatible = "gpio-leds";
status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
<&xhci_port1>;
linux,default-trigger = "usbport";
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
};
};
};
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
&spi_nor {
status = "okay";
};