mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-04 09:59:32 +00:00
usb: phy: tegra: Fix phy suspend for UDC
Commitdfebb5f43a
("usb: chipidea: Add support for Tegra20/30/114/124") added UDC support for Tegra but with UDC support enabled, is was found that Tegra30, Tegra114 and Tegra124 would hang on entry to suspend. The hang occurred during the suspend of the USB PHY when the Tegra PHY driver attempted to disable the PHY clock. The problem is that before the Tegra PHY driver is suspended, the chipidea driver already disabled the PHY clock and when the Tegra PHY driver suspended, it could not read DEVLC register and caused the device to hang. The Tegra USB PHY driver is used by both the Tegra EHCI driver and now the chipidea UDC driver and so simply removing the disabling of the PHY clock from the USB PHY driver would not work for the Tegra EHCI driver. Fortunately, the status of the USB PHY clock can be read from the USB_SUSP_CTRL register and therefore, to workaround this issue, simply poll the register prior to disabling the clock in USB PHY driver to see if clock gating has already been initiated. Please note that it can take a few uS for the clock to disable and so simply reading this status register once on entry is not sufficient. Similarly when turning on the PHY clock, it is possible that the clock is already enabled or in the process of being enabled, and so check for this when enabling the PHY. Please note that no issues are seen with Tegra20 because it has a slightly different PHY to Tegra30/114/124. Fixes:dfebb5f43a
("usb: chipidea: Add support for Tegra20/30/114/124") Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This commit is contained in:
parent
8a5776a5f4
commit
203f44c475
1 changed files with 17 additions and 0 deletions
|
@ -329,6 +329,14 @@ static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
|
|||
unsigned long val;
|
||||
void __iomem *base = phy->regs;
|
||||
|
||||
/*
|
||||
* The USB driver may have already initiated the phy clock
|
||||
* disable so wait to see if the clock turns off and if not
|
||||
* then proceed with gating the clock.
|
||||
*/
|
||||
if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) == 0)
|
||||
return;
|
||||
|
||||
if (phy->is_legacy_phy) {
|
||||
val = readl(base + USB_SUSP_CTRL);
|
||||
val |= USB_SUSP_SET;
|
||||
|
@ -351,6 +359,15 @@ static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
|
|||
unsigned long val;
|
||||
void __iomem *base = phy->regs;
|
||||
|
||||
/*
|
||||
* The USB driver may have already initiated the phy clock
|
||||
* enable so wait to see if the clock turns on and if not
|
||||
* then proceed with ungating the clock.
|
||||
*/
|
||||
if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
|
||||
USB_PHY_CLK_VALID) == 0)
|
||||
return;
|
||||
|
||||
if (phy->is_legacy_phy) {
|
||||
val = readl(base + USB_SUSP_CTRL);
|
||||
val |= USB_SUSP_CLR;
|
||||
|
|
Loading…
Reference in a new issue