Merge series "regulator: mp886x: two features and dt json convert" from Jisheng Zhang <jszhang3@mail.ustc.edu.cn>

Jisheng Zhang <Jisheng.Zhang@synaptics.com>:

From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

This is to improve the mp886x regulator driver support.
patch1 implments .set_ramp_delay
patch2 and patch3 support the switch freq setting
patch4 converts dt binding to json-schema

Since v2:
  - put any schema conversions at the end of the series as Mark
    suggested.

Jisheng Zhang (4):
  regulator: mp886x: implement set_ramp_delay
  dt-bindings: regulator: mp886x: support mps,switch-frequency
  regulator: mp886x: support setting switch freq
  dt-bindings: regulator: Convert mp886x to json-schema

 .../devicetree/bindings/regulator/mp886x.txt  |  27 -----
 .../bindings/regulator/mps,mp886x.yaml        |  58 ++++++++++
 drivers/regulator/mp886x.c                    | 109 +++++++++++++++++-
 3 files changed, 164 insertions(+), 30 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/mp886x.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/mps,mp886x.yaml

--
2.28.0.rc1

Documentation/devicetree/bindings/regulator/mp886x.txt

@@ -9,6 +9,10 @@ Required properties:
 - mps,fb-voltage-divider: An array of two integers containing the resistor
   values R1 and R2 of the feedback voltage divider in kilo ohms.
 
+Optional properties:
+- mps,switch-frequency: The valid switch frequency in Hertz. Available values
+  are: 500000, 750000, 1000000, 1250000, 1500000
+
 Any property defined as part of the core regulator binding, defined in
 ./regulator.txt, can also be used.
 

drivers/regulator/mp886x.c

@@ -18,18 +18,70 @@
 #define  MP886X_V_BOOT		(1 << 7)
 #define MP886X_SYSCNTLREG1	0x01
 #define  MP886X_MODE		(1 << 0)
+#define  MP886X_SLEW_SHIFT	3
+#define  MP886X_SLEW_MASK	(0x7 << MP886X_SLEW_SHIFT)
 #define  MP886X_GO		(1 << 6)
 #define  MP886X_EN		(1 << 7)
+#define MP8869_SYSCNTLREG2	0x02
+
+struct mp886x_cfg_info {
+	const struct regulator_ops *rops;
+	const int slew_rates[8];
+	const int switch_freq[4];
+	const u8 fs_reg;
+	const u8 fs_shift;
+};
 
 struct mp886x_device_info {
 	struct device *dev;
 	struct regulator_desc desc;
 	struct regulator_init_data *regulator;
 	struct gpio_desc *en_gpio;
+	const struct mp886x_cfg_info *ci;
 	u32 r[2];
 	unsigned int sel;
 };
 
+static int mp886x_set_ramp(struct regulator_dev *rdev, int ramp)
+{
+	struct mp886x_device_info *di = rdev_get_drvdata(rdev);
+	const struct mp886x_cfg_info *ci = di->ci;
+	int reg = -1, i;
+
+	for (i = 0; i < ARRAY_SIZE(ci->slew_rates); i++) {
+		if (ramp <= ci->slew_rates[i])
+			reg = i;
+		else
+			break;
+	}
+
+	if (reg < 0) {
+		dev_err(di->dev, "unsupported ramp value %d\n", ramp);
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1,
+				  MP886X_SLEW_MASK, reg << MP886X_SLEW_SHIFT);
+}
+
+static void mp886x_set_switch_freq(struct mp886x_device_info *di,
+				   struct regmap *regmap,
+				   u32 freq)
+{
+	const struct mp886x_cfg_info *ci = di->ci;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ci->switch_freq); i++) {
+		if (freq == ci->switch_freq[i]) {
+			regmap_update_bits(regmap, ci->fs_reg,
+				  0x3 << ci->fs_shift, i << ci->fs_shift);
+			return;
+		}
+	}
+
+	dev_err(di->dev, "invalid frequency %d\n", freq);
+}
+
 static int mp886x_set_mode(struct regulator_dev *rdev, unsigned int mode)
 {
 	switch (mode) {
@@ -117,6 +169,29 @@ static const struct regulator_ops mp8869_regulator_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.set_mode = mp886x_set_mode,
 	.get_mode = mp886x_get_mode,
+	.set_ramp_delay = mp886x_set_ramp,
+};
+
+static const struct mp886x_cfg_info mp8869_ci = {
+	.rops = &mp8869_regulator_ops,
+	.slew_rates = {
+		40000,
+		30000,
+		20000,
+		10000,
+		5000,
+		2500,
+		1250,
+		625,
+	},
+	.switch_freq = {
+		500000,
+		750000,
+		1000000,
+		1250000,
+	},
+	.fs_reg = MP8869_SYSCNTLREG2,
+	.fs_shift = 4,
 };
 
 static int mp8867_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel)
@@ -173,6 +248,29 @@ static const struct regulator_ops mp8867_regulator_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.set_mode = mp886x_set_mode,
 	.get_mode = mp886x_get_mode,
+	.set_ramp_delay = mp886x_set_ramp,
+};
+
+static const struct mp886x_cfg_info mp8867_ci = {
+	.rops = &mp8867_regulator_ops,
+	.slew_rates = {
+		64000,
+		32000,
+		16000,
+		8000,
+		4000,
+		2000,
+		1000,
+		500,
+	},
+	.switch_freq = {
+		500000,
+		750000,
+		1000000,
+		1500000,
+	},
+	.fs_reg = MP886X_SYSCNTLREG1,
+	.fs_shift = 1,
 };
 
 static int mp886x_regulator_register(struct mp886x_device_info *di,
@@ -183,7 +281,7 @@ static int mp886x_regulator_register(struct mp886x_device_info *di,
 
 	rdesc->name = "mp886x-reg";
 	rdesc->supply_name = "vin";
-	rdesc->ops = of_device_get_match_data(di->dev);
+	rdesc->ops = di->ci->rops;
 	rdesc->type = REGULATOR_VOLTAGE;
 	rdesc->n_voltages = 128;
 	rdesc->enable_reg = MP886X_SYSCNTLREG1;
@@ -213,6 +311,7 @@ static int mp886x_i2c_probe(struct i2c_client *client)
 	struct mp886x_device_info *di;
 	struct regulator_config config = { };
 	struct regmap *regmap;
+	u32 freq;
 	int ret;
 
 	di = devm_kzalloc(dev, sizeof(struct mp886x_device_info), GFP_KERNEL);
@@ -234,6 +333,7 @@ static int mp886x_i2c_probe(struct i2c_client *client)
 	if (IS_ERR(di->en_gpio))
 		return PTR_ERR(di->en_gpio);
 
+	di->ci = of_device_get_match_data(dev);
 	di->dev = dev;
 
 	regmap = devm_regmap_init_i2c(client, &mp886x_regmap_config);
@@ -249,6 +349,9 @@ static int mp886x_i2c_probe(struct i2c_client *client)
 	config.driver_data = di;
 	config.of_node = np;
 
+	if (!of_property_read_u32(np, "mps,switch-frequency", &freq))
+		mp886x_set_switch_freq(di, regmap, freq);
+
 	ret = mp886x_regulator_register(di, &config);
 	if (ret < 0)
 		dev_err(dev, "Failed to register regulator!\n");
@@ -258,11 +361,11 @@ static int mp886x_i2c_probe(struct i2c_client *client)
 static const struct of_device_id mp886x_dt_ids[] = {
 	{
 		.compatible = "mps,mp8867",
-		.data = &mp8867_regulator_ops
+		.data = &mp8867_ci
 	},
 	{
 		.compatible = "mps,mp8869",
-		.data = &mp8869_regulator_ops
+		.data = &mp8869_ci
 	},
 	{ }
 };