Input: goodix - refactor reset handling

Refactor reset handling a bit, change the main reset handler
into a new goodix_reset_no_int_sync() helper and add a
goodix_reset() wrapper which calls goodix_int_sync()
separately.

Also push the dev_err() call on reset failure into the
goodix_reset_no_int_sync() and goodix_int_sync() functions,
so that we don't need to have separate dev_err() calls in
all their callers.

This is a preparation patch for adding support for controllers
without flash, which need to have their firmware uploaded and
need some other special handling too.

Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920150643.155872-4-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit is contained in:
Hans de Goede 2021-09-20 21:08:26 -07:00 committed by Dmitry Torokhov
parent a2233cb7b6
commit 209bda4741
2 changed files with 52 additions and 35 deletions

View file

@ -640,15 +640,60 @@ int goodix_int_sync(struct goodix_ts_data *ts)
error = goodix_irq_direction_output(ts, 0);
if (error)
return error;
goto error;
msleep(50); /* T5: 50ms */
error = goodix_irq_direction_input(ts);
if (error)
return error;
goto error;
return 0;
error:
dev_err(&ts->client->dev, "Controller irq sync failed.\n");
return error;
}
/**
* goodix_reset_no_int_sync - Reset device, leaving interrupt line in output mode
*
* @ts: goodix_ts_data pointer
*/
int goodix_reset_no_int_sync(struct goodix_ts_data *ts)
{
int error;
/* begin select I2C slave addr */
error = gpiod_direction_output(ts->gpiod_rst, 0);
if (error)
goto error;
msleep(20); /* T2: > 10ms */
/* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */
error = goodix_irq_direction_output(ts, ts->client->addr == 0x14);
if (error)
goto error;
usleep_range(100, 2000); /* T3: > 100us */
error = gpiod_direction_output(ts->gpiod_rst, 1);
if (error)
goto error;
usleep_range(6000, 10000); /* T4: > 5ms */
/* end select I2C slave addr */
error = gpiod_direction_input(ts->gpiod_rst);
if (error)
goto error;
return 0;
error:
dev_err(&ts->client->dev, "Controller reset failed.\n");
return error;
}
/**
@ -660,36 +705,11 @@ static int goodix_reset(struct goodix_ts_data *ts)
{
int error;
/* begin select I2C slave addr */
error = gpiod_direction_output(ts->gpiod_rst, 0);
error = goodix_reset_no_int_sync(ts);
if (error)
return error;
msleep(20); /* T2: > 10ms */
/* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */
error = goodix_irq_direction_output(ts, ts->client->addr == 0x14);
if (error)
return error;
usleep_range(100, 2000); /* T3: > 100us */
error = gpiod_direction_output(ts->gpiod_rst, 1);
if (error)
return error;
usleep_range(6000, 10000); /* T4: > 5ms */
/* end select I2C slave addr */
error = gpiod_direction_input(ts->gpiod_rst);
if (error)
return error;
error = goodix_int_sync(ts);
if (error)
return error;
return 0;
return goodix_int_sync(ts);
}
#ifdef ACPI_GPIO_SUPPORT
@ -1195,10 +1215,8 @@ static int goodix_ts_probe(struct i2c_client *client,
if (ts->reset_controller_at_probe) {
/* reset the controller */
error = goodix_reset(ts);
if (error) {
dev_err(&client->dev, "Controller reset failed.\n");
if (error)
return error;
}
}
error = goodix_i2c_test(client);
@ -1340,10 +1358,8 @@ static int __maybe_unused goodix_resume(struct device *dev)
if (error != 0 || config_ver != ts->config[0]) {
error = goodix_reset(ts);
if (error) {
dev_err(dev, "Controller reset failed.\n");
if (error)
return error;
}
error = goodix_send_cfg(ts, ts->config, ts->chip->config_len);
if (error)

View file

@ -69,5 +69,6 @@ int goodix_i2c_write(struct i2c_client *client, u16 reg, const u8 *buf, int len)
int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value);
int goodix_send_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len);
int goodix_int_sync(struct goodix_ts_data *ts);
int goodix_reset_no_int_sync(struct goodix_ts_data *ts);
#endif