ASoC: Fixes for v3.11

A fix to make sure userspace knows when control writes have caused a
 change in value, fixing some UIs, plus a few few driver fixes mainly
 cleaning up issues from recent refactorings on less mainstream platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR+iU1AAoJELSic+t+oim9vJcP/Ro/AhPccuGwTa7tyMFSGAYO
 3xQh4REis7TGgCWu018G+zA4bS5Inrqo7B0M61PFxCJoZ3R4QvIgKXHasQ9SNXmW
 +nUYqs05rgzl4U2uyEUNLoVelFa1ZbQLKQxuOUQt0+u9rvtBZczNd85KeNtn3IVp
 38LTc2scrxo2HmU7UE418euPuFYiz7PMWKSMGd/r5Ht2h6Tij8eQ/Vkm8IgKJ7n6
 kfMZCdMgTx0k/JC3Akz2colIIc0I8ioV2FWkZ1XAMaktFR0u585EbqBC2QJhiXRF
 RJREXCxp8SGI4H961m53GICk39xfWLC7d1/sprzWDWZ6XTM5T9rp8x3iJNw74AcG
 2ERMrDjlJKNVpedhnY7KgtegC+qT/9XcLa1qKpAR9Ym61HUvRvUVD9OsEJ4l5ISn
 m+EZFt1Z9BhXU/HlhLN9Nr6mw0A6OnpvyUwR8cR83gz9OHFCmg8MOxVP26sNQSuX
 1Ll7XRikSxC5n4AxG3APE8MLB7bcvUoL7benD4zekXG+pJhoefg5hmL7qvMCv+fy
 bkeFafc3QUSsaiuf2tQjfHF99wvJC/BWt4cx1hdRjLNMxqoJre5hpJE9/l4JLs7X
 Z6j6RTOD7/cXPZNMh67zK2w/V2NzcvK9I4U20HA9+IjfiYYugCc2XzCLaYrp1bwo
 6P8Y8EXhUC3thSti/WUZ
 =WtLE
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.11

A fix to make sure userspace knows when control writes have caused a
change in value, fixing some UIs, plus a few few driver fixes mainly
cleaning up issues from recent refactorings on less mainstream platforms.
This commit is contained in:
Takashi Iwai 2013-08-01 11:12:10 +02:00
commit 209fb1b7e2
334 changed files with 6938 additions and 4818 deletions

View File

@ -0,0 +1,17 @@
What: /sys/module/xen_blkback/parameters/max_buffer_pages
Date: March 2013
KernelVersion: 3.11
Contact: Roger Pau Monné <roger.pau@citrix.com>
Description:
Maximum number of free pages to keep in each block
backend buffer.
What: /sys/module/xen_blkback/parameters/max_persistent_grants
Date: March 2013
KernelVersion: 3.11
Contact: Roger Pau Monné <roger.pau@citrix.com>
Description:
Maximum number of grants to map persistently in
blkback. If the frontend tries to use more than
max_persistent_grants, the LRU kicks in and starts
removing 5% of max_persistent_grants every 100ms.

View File

@ -0,0 +1,10 @@
What: /sys/module/xen_blkfront/parameters/max
Date: June 2013
KernelVersion: 3.11
Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Description:
Maximum number of segments that the frontend will negotiate
with the backend for indirect descriptors. The default value
is 32 - higher value means more potential throughput but more
memory usage. The backend picks the minimum of the frontend
and its default backend value.

View File

@ -46,29 +46,33 @@ you format your backing devices and cache device at the same time, you won't
have to manually attach:
make-bcache -B /dev/sda /dev/sdb -C /dev/sdc
To make bcache devices known to the kernel, echo them to /sys/fs/bcache/register:
bcache-tools now ships udev rules, and bcache devices are known to the kernel
immediately. Without udev, you can manually register devices like this:
echo /dev/sdb > /sys/fs/bcache/register
echo /dev/sdc > /sys/fs/bcache/register
To register your bcache devices automatically, you could add something like
this to an init script:
Registering the backing device makes the bcache device show up in /dev; you can
now format it and use it as normal. But the first time using a new bcache
device, it'll be running in passthrough mode until you attach it to a cache.
See the section on attaching.
echo /dev/sd* > /sys/fs/bcache/register_quiet
The devices show up as:
It'll look for bcache superblocks and ignore everything that doesn't have one.
/dev/bcache<N>
Registering the backing device makes the bcache show up in /dev; you can now
format it and use it as normal. But the first time using a new bcache device,
it'll be running in passthrough mode until you attach it to a cache. See the
section on attaching.
As well as (with udev):
The devices show up at /dev/bcacheN, and can be controlled via sysfs from
/sys/block/bcacheN/bcache:
/dev/bcache/by-uuid/<uuid>
/dev/bcache/by-label/<label>
To get started:
mkfs.ext4 /dev/bcache0
mount /dev/bcache0 /mnt
You can control bcache devices through sysfs at /sys/block/bcache<N>/bcache .
Cache devices are managed as sets; multiple caches per set isn't supported yet
but will allow for mirroring of metadata and dirty data in the future. Your new
cache set shows up as /sys/fs/bcache/<UUID>
@ -80,11 +84,11 @@ must be attached to your cache set to enable caching. Attaching a backing
device to a cache set is done thusly, with the UUID of the cache set in
/sys/fs/bcache:
echo <UUID> > /sys/block/bcache0/bcache/attach
echo <CSET-UUID> > /sys/block/bcache0/bcache/attach
This only has to be done once. The next time you reboot, just reregister all
your bcache devices. If a backing device has data in a cache somewhere, the
/dev/bcache# device won't be created until the cache shows up - particularly
/dev/bcache<N> device won't be created until the cache shows up - particularly
important if you have writeback caching turned on.
If you're booting up and your cache device is gone and never coming back, you
@ -191,6 +195,9 @@ want for getting the best possible numbers when benchmarking.
SYSFS - BACKING DEVICE:
Available at /sys/block/<bdev>/bcache, /sys/block/bcache*/bcache and
(if attached) /sys/fs/bcache/<cset-uuid>/bdev*
attach
Echo the UUID of a cache set to this file to enable caching.
@ -300,6 +307,8 @@ cache_readaheads
SYSFS - CACHE SET:
Available at /sys/fs/bcache/<cset-uuid>
average_key_size
Average data per key in the btree.
@ -390,6 +399,8 @@ trigger_gc
SYSFS - CACHE DEVICE:
Available at /sys/block/<cdev>/bcache
block_size
Minimum granularity of writes - should match hardware sector size.

View File

@ -98,6 +98,7 @@ clocks and IDs.
fpm 83
mpll_osc_sel 84
mpll_sel 85
spll_gate 86
Examples:

View File

@ -26,6 +26,7 @@ est ESTeem Wireless Modems
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
hisilicon Hisilicon Limited.
hp Hewlett Packard
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
@ -43,6 +44,7 @@ nxp NXP Semiconductors
onnn ON Semiconductor Corp.
picochip Picochip Ltd
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
qcom Qualcomm, Inc.
ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International

View File

@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a
fork. So if you have any comments or updates for this file, please try
to update the original English file first.
Last Updated: 2011/03/31
Last Updated: 2013/07/19
==================================
これは、
linux-2.6.38/Documentation/HOWTO
linux-3.10/Documentation/HOWTO
の和訳です。
翻訳団体: JF プロジェクト < http://www.linux.or.jp/JF/ >
翻訳日: 2011/3/28
翻訳団体: JF プロジェクト < http://linuxjf.sourceforge.jp/ >
翻訳日: 2013/7/19
翻訳者: Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
校正者: 松倉さん <nbh--mats at nifty dot com>
小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
@ -245,7 +245,7 @@ Linux カーネルソースツリーの中に含まれる、きれいにし、
自己参照方式で、索引がついた web 形式で、ソースコードを参照することが
できます。この最新の素晴しいカーネルコードのリポジトリは以下で見つかり
ます-
http://sosdg.org/~qiyong/lxr/
http://lxr.linux.no/+trees
開発プロセス
-----------------------
@ -253,24 +253,24 @@ Linux カーネルソースツリーの中に含まれる、きれいにし、
Linux カーネルの開発プロセスは現在幾つかの異なるメインカーネル「ブラン
チ」と多数のサブシステム毎のカーネルブランチから構成されます。
これらのブランチとは-
- メインの 2.6.x カーネルツリー
- 2.6.x.y -stable カーネルツリー
- 2.6.x -git カーネルパッチ
- メインの 3.x カーネルツリー
- 3.x.y -stable カーネルツリー
- 3.x -git カーネルパッチ
- サブシステム毎のカーネルツリーとパッチ
- 統合テストのための 2.6.x -next カーネルツリー
- 統合テストのための 3.x -next カーネルツリー
2.6.x カーネルツリー
3.x カーネルツリー
-----------------
2.6.x カーネルは Linus Torvalds によってメンテナンスされ、kernel.org
の pub/linux/kernel/v2.6/ ディレクトリに存在します。この開発プロセスは
3.x カーネルは Linus Torvalds によってメンテナンスされ、kernel.org
の pub/linux/kernel/v3.x/ ディレクトリに存在します。この開発プロセスは
以下のとおり-
- 新しいカーネルがリリースされた直後に、2週間の特別期間が設けられ、
この期間中に、メンテナ達は Linus に大きな差分を送ることができます。
このような差分は通常 -next カーネルに数週間含まれてきたパッチです。
大きな変更は git(カーネルのソース管理ツール、詳細は
http://git-scm.com/ 参照) を使って送るのが好ましいやり方ですが、パッ
http://git-scm.com/ 参照) を使って送るのが好ましいやり方ですが、パッ
チファイルの形式のまま送るのでも十分です。
- 2週間後、-rc1 カーネルがリリースされ、この後にはカーネル全体の安定
@ -302,20 +302,20 @@ Andrew Morton が Linux-kernel メーリングリストにカーネルリリー
実に認識されたバグの状況によりリリースされるのであり、前もって決めら
れた計画によってリリースされるものではないからです。」
2.6.x.y -stable カーネルツリー
3.x.y -stable カーネルツリー
---------------------------
バージョン番号が4つの数字に分かれているカーネルは -stable カーネルです。
これには、2.6.x カーネルで見つかったセキュリティ問題や重大な後戻りに対
バージョン番号が3つの数字に分かれているカーネルは -stable カーネルです。
これには、3.x カーネルで見つかったセキュリティ問題や重大な後戻りに対
する比較的小さい重要な修正が含まれます。
これは、開発/実験的バージョンのテストに協力することに興味が無く、
最新の安定したカーネルを使いたいユーザに推奨するブランチです。
もし、2.6.x.y カーネルが存在しない場合には、番号が一番大きい 2.6.x が
もし、3.x.y カーネルが存在しない場合には、番号が一番大きい 3.x が
最新の安定版カーネルです。
2.6.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必
3.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必
要に応じてリリースされます。通常のリリース期間は 2週間毎ですが、差し迫っ
た問題がなければもう少し長くなることもあります。セキュリティ関連の問題
の場合はこれに対してだいたいの場合、すぐにリリースがされます。
@ -324,7 +324,7 @@ Andrew Morton が Linux-kernel メーリングリストにカーネルリリー
イルにはどのような種類の変更が -stable ツリーに受け入れ可能か、またリ
リースプロセスがどう動くかが記述されています。
2.6.x -git パッチ
3.x -git パッチ
------------------
git リポジトリで管理されているLinus のカーネルツリーの毎日のスナップ
@ -358,14 +358,14 @@ quilt シリーズとして公開されているパッチキューも使われ
をつけることができます。大部分のこれらの patchwork のサイトは
http://patchwork.kernel.org/ でリストされています。
統合テストのための 2.6.x -next カーネルツリー
統合テストのための 3.x -next カーネルツリー
---------------------------------------------
サブシステムツリーの更新内容がメインラインの 2.6.x ツリーにマージされ
サブシステムツリーの更新内容がメインラインの 3.x ツリーにマージされ
る前に、それらは統合テストされる必要があります。この目的のため、実質的
に全サブシステムツリーからほぼ毎日プルされてできる特別なテスト用のリ
ポジトリが存在します-
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
http://linux.f-seidel.de/linux-next/pmwiki/
このやり方によって、-next カーネルは次のマージ機会でどんなものがメイン

View File

@ -1642,7 +1642,7 @@ S: Maintained
F: drivers/net/hamradio/baycom*
BCACHE (BLOCK LAYER CACHE)
M: Kent Overstreet <koverstreet@google.com>
M: Kent Overstreet <kmo@daterainc.com>
L: linux-bcache@vger.kernel.org
W: http://bcache.evilpiepirate.org
S: Maintained:
@ -3346,7 +3346,7 @@ F: Documentation/firmware_class/
F: drivers/base/firmware*.c
F: include/linux/firmware.h
FLASHSYSTEM DRIVER (IBM FlashSystem 70/80 PCI SSD Flash Card)
FLASH ADAPTER DRIVER (IBM Flash Adapter 900GB Full Height PCI Flash Card)
M: Joshua Morris <josh.h.morris@us.ibm.com>
M: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
S: Maintained
@ -3622,11 +3622,9 @@ F: drivers/isdn/gigaset/
F: include/uapi/linux/gigaset_dev.h
GPIO SUBSYSTEM
M: Grant Likely <grant.likely@linaro.org>
M: Linus Walleij <linus.walleij@linaro.org>
S: Maintained
L: linux-gpio@vger.kernel.org
T: git git://git.secretlab.ca/git/linux-2.6.git
F: Documentation/gpio.txt
F: drivers/gpio/
F: include/linux/gpio*
@ -4472,8 +4470,6 @@ F: drivers/irqchip/
IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
M: Grant Likely <grant.likely@linaro.org>
T: git git://git.secretlab.ca/git/linux-2.6.git irqdomain/next
S: Maintained
F: Documentation/IRQ-domain.txt
F: include/linux/irqdomain.h
@ -4990,7 +4986,7 @@ F: arch/powerpc/platforms/44x/
LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
L: linuxppc-dev@lists.ozlabs.org
S: Unmaintained
S: Orphan
F: arch/powerpc/*/*virtex*
F: arch/powerpc/*/*/*virtex*
@ -5886,7 +5882,7 @@ OMAP DEVICE TREE SUPPORT
M: Benoît Cousson <b-cousson@ti.com>
M: Tony Lindgren <tony@atomide.com>
L: linux-omap@vger.kernel.org
L: devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
L: devicetree@vger.kernel.org
S: Maintained
F: arch/arm/boot/dts/*omap*
F: arch/arm/boot/dts/*am3*
@ -6050,17 +6046,28 @@ F: drivers/i2c/busses/i2c-ocores.c
OPEN FIRMWARE AND FLATTENED DEVICE TREE
M: Grant Likely <grant.likely@linaro.org>
M: Rob Herring <rob.herring@calxeda.com>
L: devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
L: devicetree@vger.kernel.org
W: http://fdt.secretlab.ca
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
F: Documentation/devicetree
F: drivers/of
F: drivers/of/
F: include/linux/of*.h
F: scripts/dtc
F: scripts/dtc/
K: of_get_property
K: of_match_table
OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
M: Rob Herring <rob.herring@calxeda.com>
M: Pawel Moll <pawel.moll@arm.com>
M: Mark Rutland <mark.rutland@arm.com>
M: Stephen Warren <swarren@wwwdotorg.org>
M: Ian Campbell <ian.campbell@citrix.com>
L: devicetree@vger.kernel.org
S: Maintained
F: Documentation/devicetree/
F: arch/*/boot/dts/
F: include/dt-bindings/
OPENRISC ARCHITECTURE
M: Jonas Bonn <jonas@southpole.se>
W: http://openrisc.net
@ -7746,7 +7753,6 @@ F: drivers/clk/spear/
SPI SUBSYSTEM
M: Mark Brown <broonie@kernel.org>
M: Grant Likely <grant.likely@linaro.org>
L: linux-spi@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
Q: http://patchwork.kernel.org/project/spi-devel-general/list/
@ -7812,7 +7818,7 @@ F: drivers/staging/asus_oled/
STAGING - COMEDI
M: Ian Abbott <abbotti@mev.co.uk>
M: Mori Hess <fmhess@users.sourceforge.net>
M: H Hartley Sweeten <hsweeten@visionengravers.com>
S: Odd Fixes
F: drivers/staging/comedi/
@ -9288,7 +9294,7 @@ S: Maintained
F: drivers/net/ethernet/xilinx/xilinx_axienet*
XILINX SYSTEMACE DRIVER
S: Unmaintained
S: Orphan
F: drivers/block/xsysace.c
XILINX UARTLITE SERIAL DRIVER

View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 11
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc3
NAME = Linux for Workgroups
# *DOCUMENTATION*

View File

@ -15,6 +15,7 @@ config ALPHA
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select GENERIC_SMP_IDLE_THREAD
select GENERIC_CMOS_UPDATE
select GENERIC_STRNCPY_FROM_USER

View File

@ -186,17 +186,24 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
*/
static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
{
int c, old;
c = atomic_read(v);
for (;;) {
if (unlikely(c == (u)))
break;
old = atomic_cmpxchg((v), c, c + (a));
if (likely(old == c))
break;
c = old;
}
return c;
int c, new, old;
smp_mb();
__asm__ __volatile__(
"1: ldl_l %[old],%[mem]\n"
" cmpeq %[old],%[u],%[c]\n"
" addl %[old],%[a],%[new]\n"
" bne %[c],2f\n"
" stl_c %[new],%[mem]\n"
" beq %[new],3f\n"
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: [old] "=&r"(old), [new] "=&r"(new), [c] "=&r"(c)
: [mem] "m"(*v), [a] "rI"(a), [u] "rI"((long)u)
: "memory");
smp_mb();
return old;
}
@ -207,21 +214,56 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
* @u: ...unless v is equal to u.
*
* Atomically adds @a to @v, so long as it was not @u.
* Returns the old value of @v.
* Returns true iff @v was not @u.
*/
static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
{
long c, old;
c = atomic64_read(v);
for (;;) {
if (unlikely(c == (u)))
break;
old = atomic64_cmpxchg((v), c, c + (a));
if (likely(old == c))
break;
c = old;
}
return c != (u);
long c, tmp;
smp_mb();
__asm__ __volatile__(
"1: ldq_l %[tmp],%[mem]\n"
" cmpeq %[tmp],%[u],%[c]\n"
" addq %[tmp],%[a],%[tmp]\n"
" bne %[c],2f\n"
" stq_c %[tmp],%[mem]\n"
" beq %[tmp],3f\n"
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: [tmp] "=&r"(tmp), [c] "=&r"(c)
: [mem] "m"(*v), [a] "rI"(a), [u] "rI"(u)
: "memory");
smp_mb();
return !c;
}
/*
* atomic64_dec_if_positive - decrement by 1 if old value positive
* @v: pointer of type atomic_t
*
* The function returns the old value of *v minus 1, even if
* the atomic variable, v, was not decremented.
*/
static inline long atomic64_dec_if_positive(atomic64_t *v)
{
long old, tmp;
smp_mb();
__asm__ __volatile__(
"1: ldq_l %[old],%[mem]\n"
" subq %[old],1,%[tmp]\n"
" ble %[old],2f\n"
" stq_c %[tmp],%[mem]\n"
" beq %[tmp],3f\n"
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: [old] "=&r"(old), [tmp] "=&r"(tmp)
: [mem] "m"(*v)
: "memory");
smp_mb();
return old - 1;
}
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)

View File

@ -3,7 +3,9 @@
#include <uapi/asm/param.h>
#define HZ CONFIG_HZ
#define USER_HZ HZ
# define CLOCKS_PER_SEC HZ /* frequency at which times() counts */
# undef HZ
# define HZ CONFIG_HZ
# define USER_HZ 1024
# define CLOCKS_PER_SEC USER_HZ /* frequency at which times() counts */
#endif /* _ASM_ALPHA_PARAM_H */

View File

@ -168,8 +168,4 @@ static inline void arch_write_unlock(arch_rwlock_t * lock)
#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
#define arch_spin_relax(lock) cpu_relax()
#define arch_read_relax(lock) cpu_relax()
#define arch_write_relax(lock) cpu_relax()
#endif /* _ALPHA_SPINLOCK_H */

View File

@ -3,8 +3,7 @@
#include <uapi/asm/unistd.h>
#define NR_SYSCALLS 506
#define NR_SYSCALLS 508
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_STAT64

View File

@ -1,13 +1,7 @@
#ifndef _UAPI_ASM_ALPHA_PARAM_H
#define _UAPI_ASM_ALPHA_PARAM_H
/* ??? Gross. I don't want to parameterize this, and supposedly the
hardware ignores reprogramming. We also need userland buy-in to the
change in HZ, since this is visible in the wait4 resources etc. */
#ifndef __KERNEL__
#define HZ 1024
#endif
#define EXEC_PAGESIZE 8192
@ -17,5 +11,4 @@
#define MAXHOSTNAMELEN 64 /* max length of hostname */
#endif /* _UAPI_ASM_ALPHA_PARAM_H */

View File

@ -467,5 +467,7 @@
#define __NR_sendmmsg 503
#define __NR_process_vm_readv 504
#define __NR_process_vm_writev 505
#define __NR_kcmp 506
#define __NR_finit_module 507
#endif /* _UAPI_ALPHA_UNISTD_H */

View File

@ -12,11 +12,32 @@
.text
.set noat
.cfi_sections .debug_frame
/* Stack offsets. */
#define SP_OFF 184
#define SWITCH_STACK_SIZE 320
.macro CFI_START_OSF_FRAME func
.align 4
.globl \func
.type \func,@function
\func:
.cfi_startproc simple
.cfi_return_column 64
.cfi_def_cfa $sp, 48
.cfi_rel_offset 64, 8
.cfi_rel_offset $gp, 16
.cfi_rel_offset $16, 24
.cfi_rel_offset $17, 32
.cfi_rel_offset $18, 40
.endm
.macro CFI_END_OSF_FRAME func
.cfi_endproc
.size \func, . - \func
.endm
/*
* This defines the normal kernel pt-regs layout.
*
@ -27,100 +48,158 @@
* the palcode-provided values are available to the signal handler.
*/
#define SAVE_ALL \
subq $sp, SP_OFF, $sp; \
stq $0, 0($sp); \
stq $1, 8($sp); \
stq $2, 16($sp); \
stq $3, 24($sp); \
stq $4, 32($sp); \
stq $28, 144($sp); \
lda $2, alpha_mv; \
stq $5, 40($sp); \
stq $6, 48($sp); \
stq $7, 56($sp); \
stq $8, 64($sp); \
stq $19, 72($sp); \
stq $20, 80($sp); \
stq $21, 88($sp); \
ldq $2, HAE_CACHE($2); \
stq $22, 96($sp); \
stq $23, 104($sp); \
stq $24, 112($sp); \
stq $25, 120($sp); \
stq $26, 128($sp); \
stq $27, 136($sp); \
stq $2, 152($sp); \
stq $16, 160($sp); \
stq $17, 168($sp); \
.macro SAVE_ALL
subq $sp, SP_OFF, $sp
.cfi_adjust_cfa_offset SP_OFF
stq $0, 0($sp)
stq $1, 8($sp)
stq $2, 16($sp)
stq $3, 24($sp)
stq $4, 32($sp)
stq $28, 144($sp)
.cfi_rel_offset $0, 0
.cfi_rel_offset $1, 8
.cfi_rel_offset $2, 16
.cfi_rel_offset $3, 24
.cfi_rel_offset $4, 32
.cfi_rel_offset $28, 144
lda $2, alpha_mv
stq $5, 40($sp)
stq $6, 48($sp)
stq $7, 56($sp)
stq $8, 64($sp)
stq $19, 72($sp)
stq $20, 80($sp)
stq $21, 88($sp)
ldq $2, HAE_CACHE($2)
stq $22, 96($sp)
stq $23, 104($sp)
stq $24, 112($sp)
stq $25, 120($sp)
stq $26, 128($sp)
stq $27, 136($sp)
stq $2, 152($sp)
stq $16, 160($sp)
stq $17, 168($sp)
stq $18, 176($sp)
.cfi_rel_offset $5, 40
.cfi_rel_offset $6, 48
.cfi_rel_offset $7, 56
.cfi_rel_offset $8, 64
.cfi_rel_offset $19, 72
.cfi_rel_offset $20, 80
.cfi_rel_offset $21, 88
.cfi_rel_offset $22, 96
.cfi_rel_offset $23, 104
.cfi_rel_offset $24, 112
.cfi_rel_offset $25, 120
.cfi_rel_offset $26, 128
.cfi_rel_offset $27, 136
.endm
#define RESTORE_ALL \
lda $19, alpha_mv; \
ldq $0, 0($sp); \
ldq $1, 8($sp); \
ldq $2, 16($sp); \
ldq $3, 24($sp); \
ldq $21, 152($sp); \
ldq $20, HAE_CACHE($19); \
ldq $4, 32($sp); \
ldq $5, 40($sp); \
ldq $6, 48($sp); \
ldq $7, 56($sp); \
subq $20, $21, $20; \
ldq $8, 64($sp); \
beq $20, 99f; \
ldq $20, HAE_REG($19); \
stq $21, HAE_CACHE($19); \
stq $21, 0($20); \
99:; \
ldq $19, 72($sp); \
ldq $20, 80($sp); \
ldq $21, 88($sp); \
ldq $22, 96($sp); \
ldq $23, 104($sp); \
ldq $24, 112($sp); \
ldq $25, 120($sp); \
ldq $26, 128($sp); \
ldq $27, 136($sp); \
ldq $28, 144($sp); \
.macro RESTORE_ALL
lda $19, alpha_mv
ldq $0, 0($sp)
ldq $1, 8($sp)
ldq $2, 16($sp)
ldq $3, 24($sp)
ldq $21, 152($sp)
ldq $20, HAE_CACHE($19)
ldq $4, 32($sp)
ldq $5, 40($sp)
ldq $6, 48($sp)
ldq $7, 56($sp)
subq $20, $21, $20
ldq $8, 64($sp)
beq $20, 99f
ldq $20, HAE_REG($19)
stq $21, HAE_CACHE($19)
stq $21, 0($20)
99: ldq $19, 72($sp)
ldq $20, 80($sp)
ldq $21, 88($sp)
ldq $22, 96($sp)
ldq $23, 104($sp)
ldq $24, 112($sp)
ldq $25, 120($sp)
ldq $26, 128($sp)
ldq $27, 136($sp)
ldq $28, 144($sp)
addq $sp, SP_OFF, $sp
.cfi_restore $0
.cfi_restore $1
.cfi_restore $2
.cfi_restore $3
.cfi_restore $4
.cfi_restore $5
.cfi_restore $6
.cfi_restore $7
.cfi_restore $8
.cfi_restore $19
.cfi_restore $20
.cfi_restore $21
.cfi_restore $22
.cfi_restore $23
.cfi_restore $24
.cfi_restore $25
.cfi_restore $26
.cfi_restore $27
.cfi_restore $28
.cfi_adjust_cfa_offset -SP_OFF
.endm
.macro DO_SWITCH_STACK
bsr $1, do_switch_stack
.cfi_adjust_cfa_offset SWITCH_STACK_SIZE
.cfi_rel_offset $9, 0
.cfi_rel_offset $10, 8
.cfi_rel_offset $11, 16
.cfi_rel_offset $12, 24
.cfi_rel_offset $13, 32
.cfi_rel_offset $14, 40
.cfi_rel_offset $15, 48
/* We don't really care about the FP registers for debugging. */
.endm
.macro UNDO_SWITCH_STACK
bsr $1, undo_switch_stack
.cfi_restore $9
.cfi_restore $10
.cfi_restore $11
.cfi_restore $12
.cfi_restore $13
.cfi_restore $14
.cfi_restore $15
.cfi_adjust_cfa_offset -SWITCH_STACK_SIZE
.endm
/*
* Non-syscall kernel entry points.
*/
.align 4
.globl entInt
.ent entInt
entInt:
CFI_START_OSF_FRAME entInt
SAVE_ALL
lda $8, 0x3fff
lda $26, ret_from_sys_call
bic $sp, $8, $8
mov $sp, $19
jsr $31, do_entInt
.end entInt
CFI_END_OSF_FRAME entInt
.align 4
.globl entArith
.ent entArith
entArith:
CFI_START_OSF_FRAME entArith
SAVE_ALL
lda $8, 0x3fff
lda $26, ret_from_sys_call
bic $sp, $8, $8
mov $sp, $18
jsr $31, do_entArith
.end entArith
CFI_END_OSF_FRAME entArith
.align 4
.globl entMM
.ent entMM
entMM:
CFI_START_OSF_FRAME entMM
SAVE_ALL
/* save $9 - $15 so the inline exception code can manipulate them. */
subq $sp, 56, $sp
.cfi_adjust_cfa_offset 56
stq $9, 0($sp)
stq $10, 8($sp)
stq $11, 16($sp)
@ -128,6 +207,13 @@ entMM:
stq $13, 32($sp)
stq $14, 40($sp)
stq $15, 48($sp)
.cfi_rel_offset $9, 0
.cfi_rel_offset $10, 8
.cfi_rel_offset $11, 16
.cfi_rel_offset $12, 24
.cfi_rel_offset $13, 32
.cfi_rel_offset $14, 40
.cfi_rel_offset $15, 48
addq $sp, 56, $19
/* handle the fault */
lda $8, 0x3fff
@ -142,28 +228,33 @@ entMM:
ldq $14, 40($sp)
ldq $15, 48($sp)
addq $sp, 56, $sp
.cfi_restore $9
.cfi_restore $10
.cfi_restore $11
.cfi_restore $12
.cfi_restore $13
.cfi_restore $14
.cfi_restore $15
.cfi_adjust_cfa_offset -56
/* finish up the syscall as normal. */
br ret_from_sys_call
.end entMM
CFI_END_OSF_FRAME entMM
.align 4
.globl entIF
.ent entIF
entIF:
CFI_START_OSF_FRAME entIF
SAVE_ALL
lda $8, 0x3fff
lda $26, ret_from_sys_call
bic $sp, $8, $8
mov $sp, $17
jsr $31, do_entIF
.end entIF
CFI_END_OSF_FRAME entIF
.align 4
.globl entUna
.ent entUna
entUna:
CFI_START_OSF_FRAME entUna
lda $sp, -256($sp)
.cfi_adjust_cfa_offset 256
stq $0, 0($sp)
.cfi_rel_offset $0, 0
.cfi_remember_state
ldq $0, 256($sp) /* get PS */
stq $1, 8($sp)
stq $2, 16($sp)
@ -195,6 +286,32 @@ entUna:
stq $28, 224($sp)
mov $sp, $19
stq $gp, 232($sp)
.cfi_rel_offset $1, 1*8
.cfi_rel_offset $2, 2*8
.cfi_rel_offset $3, 3*8
.cfi_rel_offset $4, 4*8
.cfi_rel_offset $5, 5*8
.cfi_rel_offset $6, 6*8
.cfi_rel_offset $7, 7*8
.cfi_rel_offset $8, 8*8
.cfi_rel_offset $9, 9*8
.cfi_rel_offset $10, 10*8
.cfi_rel_offset $11, 11*8
.cfi_rel_offset $12, 12*8
.cfi_rel_offset $13, 13*8
.cfi_rel_offset $14, 14*8
.cfi_rel_offset $15, 15*8
.cfi_rel_offset $19, 19*8
.cfi_rel_offset $20, 20*8
.cfi_rel_offset $21, 21*8
.cfi_rel_offset $22, 22*8
.cfi_rel_offset $23, 23*8
.cfi_rel_offset $24, 24*8
.cfi_rel_offset $25, 25*8
.cfi_rel_offset $26, 26*8
.cfi_rel_offset $27, 27*8
.cfi_rel_offset $28, 28*8
.cfi_rel_offset $29, 29*8
lda $8, 0x3fff
stq $31, 248($sp)
bic $sp, $8, $8
@ -228,16 +345,45 @@ entUna:
ldq $28, 224($sp)
ldq $gp, 232($sp)
lda $sp, 256($sp)
.cfi_restore $1
.cfi_restore $2
.cfi_restore $3
.cfi_restore $4
.cfi_restore $5
.cfi_restore $6
.cfi_restore $7
.cfi_restore $8
.cfi_restore $9
.cfi_restore $10
.cfi_restore $11
.cfi_restore $12
.cfi_restore $13
.cfi_restore $14
.cfi_restore $15
.cfi_restore $19
.cfi_restore $20
.cfi_restore $21
.cfi_restore $22
.cfi_restore $23
.cfi_restore $24
.cfi_restore $25
.cfi_restore $26
.cfi_restore $27
.cfi_restore $28
.cfi_restore $29
.cfi_adjust_cfa_offset -256
call_pal PAL_rti
.end entUna
.align 4
.ent entUnaUser
entUnaUser:
.cfi_restore_state
ldq $0, 0($sp) /* restore original $0 */
lda $sp, 256($sp) /* pop entUna's stack frame */
.cfi_restore $0
.cfi_adjust_cfa_offset -256
SAVE_ALL /* setup normal kernel stack */
lda $sp, -56($sp)
.cfi_adjust_cfa_offset 56
stq $9, 0($sp)
stq $10, 8($sp)
stq $11, 16($sp)
@ -245,6 +391,13 @@ entUnaUser:
stq $13, 32($sp)
stq $14, 40($sp)
stq $15, 48($sp)
.cfi_rel_offset $9, 0
.cfi_rel_offset $10, 8
.cfi_rel_offset $11, 16
.cfi_rel_offset $12, 24
.cfi_rel_offset $13, 32
.cfi_rel_offset $14, 40
.cfi_rel_offset $15, 48
lda $8, 0x3fff
addq $sp, 56, $19
bic $sp, $8, $8
@ -257,20 +410,25 @@ entUnaUser:
ldq $14, 40($sp)
ldq $15, 48($sp)
lda $sp, 56($sp)
.cfi_restore $9
.cfi_restore $10
.cfi_restore $11
.cfi_restore $12
.cfi_restore $13
.cfi_restore $14
.cfi_restore $15
.cfi_adjust_cfa_offset -56
br ret_from_sys_call
.end entUnaUser
CFI_END_OSF_FRAME entUna
.align 4
.globl entDbg
.ent entDbg
entDbg:
CFI_START_OSF_FRAME entDbg
SAVE_ALL
lda $8, 0x3fff
lda $26, ret_from_sys_call
bic $sp, $8, $8
mov $sp, $16
jsr $31, do_entDbg
.end entDbg
CFI_END_OSF_FRAME entDbg
/*
* The system call entry point is special. Most importantly, it looks
@ -285,8 +443,12 @@ entDbg:
.align 4
.globl entSys
.globl ret_from_sys_call
.ent entSys
.type entSys, @function
.cfi_startproc simple
.cfi_return_column 64
.cfi_def_cfa $sp, 48
.cfi_rel_offset 64, 8
.cfi_rel_offset $gp, 16
entSys:
SAVE_ALL
lda $8, 0x3fff
@ -300,6 +462,9 @@ entSys:
stq $17, SP_OFF+32($sp)
s8addq $0, $5, $5
stq $18, SP_OFF+40($sp)
.cfi_rel_offset $16, SP_OFF+24
.cfi_rel_offset $17, SP_OFF+32
.cfi_rel_offset $18, SP_OFF+40
blbs $3, strace
beq $4, 1f
ldq $27, 0($5)
@ -310,6 +475,7 @@ entSys:
stq $31, 72($sp) /* a3=0 => no error */
.align 4
.globl ret_from_sys_call
ret_from_sys_call:
cmovne $26, 0, $18 /* $18 = 0 => non-restartable */
ldq $0, SP_OFF($sp)
@ -324,10 +490,12 @@ ret_to_user:
and $17, _TIF_WORK_MASK, $2
bne $2, work_pending
restore_all:
.cfi_remember_state
RESTORE_ALL
call_pal PAL_rti
ret_to_kernel:
.cfi_restore_state
lda $16, 7
call_pal PAL_swpipl
br restore_all
@ -356,7 +524,6 @@ $ret_success:
stq $0, 0($sp)
stq $31, 72($sp) /* a3=0 => no error */
br ret_from_sys_call
.end entSys
/*
* Do all cleanup when returning from all interrupts and system calls.
@ -370,7 +537,7 @@ $ret_success:
*/
.align 4
.ent work_pending
.type work_pending, @function
work_pending:
and $17, _TIF_NOTIFY_RESUME | _TIF_SIGPENDING, $2
bne $2, $work_notifysig
@ -387,23 +554,22 @@ $work_resched:
$work_notifysig:
mov $sp, $16
bsr $1, do_switch_stack
DO_SWITCH_STACK
jsr $26, do_work_pending
bsr $1, undo_switch_stack
UNDO_SWITCH_STACK
br restore_all
.end work_pending
/*
* PTRACE syscall handler
*/
.align 4
.ent strace
.type strace, @function
strace:
/* set up signal stack, call syscall_trace */
bsr $1, do_switch_stack
DO_SWITCH_STACK
jsr $26, syscall_trace_enter /* returns the syscall number */
bsr $1, undo_switch_stack
UNDO_SWITCH_STACK
/* get the arguments back.. */
ldq $16, SP_OFF+24($sp)
@ -431,9 +597,9 @@ ret_from_straced:
$strace_success:
stq $0, 0($sp) /* save return value */
bsr $1, do_switch_stack
DO_SWITCH_STACK
jsr $26, syscall_trace_leave
bsr $1, undo_switch_stack
UNDO_SWITCH_STACK
br $31, ret_from_sys_call
.align 3
@ -447,26 +613,31 @@ $strace_error:
stq $0, 0($sp)
stq $1, 72($sp) /* a3 for return */
bsr $1, do_switch_stack
DO_SWITCH_STACK
mov $18, $9 /* save old syscall number */
mov $19, $10 /* save old a3 */
jsr $26, syscall_trace_leave
mov $9, $18
mov $10, $19
bsr $1, undo_switch_stack
UNDO_SWITCH_STACK
mov $31, $26 /* tell "ret_from_sys_call" we can restart */
br ret_from_sys_call
.end strace
CFI_END_OSF_FRAME entSys
/*
* Save and restore the switch stack -- aka the balance of the user context.
*/
.align 4
.ent do_switch_stack
.type do_switch_stack, @function
.cfi_startproc simple
.cfi_return_column 64
.cfi_def_cfa $sp, 0
.cfi_register 64, $1
do_switch_stack:
lda $sp, -SWITCH_STACK_SIZE($sp)
.cfi_adjust_cfa_offset SWITCH_STACK_SIZE
stq $9, 0($sp)
stq $10, 8($sp)
stq $11, 16($sp)
@ -510,10 +681,14 @@ do_switch_stack:
stt $f0, 312($sp) # save fpcr in slot of $f31
ldt $f0, 64($sp) # dont let "do_switch_stack" change fp state.
ret $31, ($1), 1
.end do_switch_stack
.cfi_endproc
.size do_switch_stack, .-do_switch_stack
.align 4
.ent undo_switch_stack
.type undo_switch_stack, @function
.cfi_startproc simple
.cfi_def_cfa $sp, 0
.cfi_register 64, $1
undo_switch_stack:
ldq $9, 0($sp)
ldq $10, 8($sp)
@ -558,7 +733,8 @@ undo_switch_stack:
ldt $f30, 304($sp)
lda $sp, SWITCH_STACK_SIZE($sp)
ret $31, ($1), 1
.end undo_switch_stack
.cfi_endproc
.size undo_switch_stack, .-undo_switch_stack
/*
* The meat of the context switch code.
@ -566,17 +742,18 @@ undo_switch_stack:
.align 4
.globl alpha_switch_to
.ent alpha_switch_to
.type alpha_switch_to, @function
.cfi_startproc
alpha_switch_to:
.prologue 0
bsr $1, do_switch_stack
DO_SWITCH_STACK
call_pal PAL_swpctx
lda $8, 0x3fff
bsr $1, undo_switch_stack
UNDO_SWITCH_STACK
bic $sp, $8, $8
mov $17, $0
ret
.end alpha_switch_to
.cfi_endproc
.size alpha_switch_to, .-alpha_switch_to
/*
* New processes begin life here.

View File

@ -236,7 +236,7 @@ void __init
init_rtc_irq(void)
{
irq_set_chip_and_handler_name(RTC_IRQ, &dummy_irq_chip,
handle_simple_irq, "RTC");
handle_percpu_irq, "RTC");
setup_irq(RTC_IRQ, &timer_irqaction);
}

View File

@ -264,9 +264,10 @@ recv_secondary_console_msg(void)
if (cnt <= 0 || cnt >= 80)
strcpy(buf, "<<< BOGUS MSG >>>");
else {
cp1 = (char *) &cpu->ipc_buffer[11];
cp1 = (char *) &cpu->ipc_buffer[1];
cp2 = buf;
strcpy(cp2, cp1);
memcpy(cp2, cp1, cnt);
cp2[cnt] = '\0';
while ((cp2 = strchr(cp2, '\r')) != 0) {
*cp2 = ' ';

View File

@ -190,9 +190,6 @@ static struct irq_chip clipper_irq_type = {
static void
dp264_device_interrupt(unsigned long vector)
{
#if 1
printk("dp264_device_interrupt: NOT IMPLEMENTED YET!!\n");
#else
unsigned long pld;
unsigned int i;
@ -210,12 +207,7 @@ dp264_device_interrupt(unsigned long vector)
isa_device_interrupt(vector);
else
handle_irq(16 + i);
#if 0
TSUNAMI_cchip->dir0.csr = 1UL << i; mb();
tmp = TSUNAMI_cchip->dir0.csr;
#endif
}
#endif
}
static void

View File

@ -317,8 +317,9 @@ marvel_init_irq(void)
}
static int
marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
marvel_map_irq(const struct pci_dev *cdev, u8 slot, u8 pin)
{
struct pci_dev *dev = (struct pci_dev *)cdev;
struct pci_controller *hose = dev->sysdata;
struct io7_port *io7_port = hose->sysdata;
struct io7 *io7 = io7_port->io7;

View File

@ -524,6 +524,8 @@ sys_call_table:
.quad sys_sendmmsg
.quad sys_process_vm_readv
.quad sys_process_vm_writev /* 505 */
.quad sys_kcmp
.quad sys_finit_module
.size sys_call_table, . - sys_call_table
.type sys_call_table, @object

View File

@ -105,9 +105,7 @@ void arch_irq_work_raise(void)
static inline __u32 rpcc(void)
{
__u32 result;
asm volatile ("rpcc %0" : "=r"(result));
return result;
return __builtin_alpha_rpcc();
}
int update_persistent_clock(struct timespec now)

View File

@ -66,8 +66,8 @@ dik_show_regs(struct pt_regs *regs, unsigned long *r9_15)
{
printk("pc = [<%016lx>] ra = [<%016lx>] ps = %04lx %s\n",
regs->pc, regs->r26, regs->ps, print_tainted());
print_symbol("pc is at %s\n", regs->pc);
print_symbol("ra is at %s\n", regs->r26 );
printk("pc is at %pSR\n", (void *)regs->pc);
printk("ra is at %pSR\n", (void *)regs->r26);
printk("v0 = %016lx t0 = %016lx t1 = %016lx\n",
regs->r0, regs->r1, regs->r2);
printk("t2 = %016lx t3 = %016lx t4 = %016lx\n",
@ -132,9 +132,7 @@ dik_show_trace(unsigned long *sp)
continue;
if (tmp >= (unsigned long) &_etext)
continue;
printk("[<%lx>]", tmp);
print_symbol(" %s", tmp);
printk("\n");
printk("[<%lx>] %pSR\n", tmp, (void *)tmp);
if (i > 40) {
printk(" ...");
break;

View File

@ -1600,8 +1600,7 @@ config LOCAL_TIMERS
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
default 512 if SOC_OMAP5
default 512 if ARCH_KEYSTONE
default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5
default 392 if ARCH_U8500
default 352 if ARCH_VT8500
default 288 if ARCH_SUNXI

View File

@ -485,6 +485,12 @@
sirf,function = "usp0";
};
};
usp0_uart_nostreamctrl_pins_a: usp0@1 {
usp0 {
sirf,pins = "usp0_uart_nostreamctrl_grp";
sirf,function = "usp0_uart_nostreamctrl";
};
};
usp1_pins_a: usp1@0 {
usp1 {
sirf,pins = "usp1grp";
@ -515,16 +521,16 @@
sirf,function = "pulse_count";
};
};
cko0_rst_pins_a: cko0_rst@0 {
cko0_rst {
sirf,pins = "cko0_rstgrp";
sirf,function = "cko0_rst";
cko0_pins_a: cko0@0 {
cko0 {
sirf,pins = "cko0grp";
sirf,function = "cko0";
};
};
cko1_rst_pins_a: cko1_rst@0 {
cko1_rst {
sirf,pins = "cko1_rstgrp";
sirf,function = "cko1_rst";
cko1_pins_a: cko1@0 {
cko1 {
sirf,pins = "cko1grp";
sirf,function = "cko1";
};
};
};

View File

@ -147,7 +147,7 @@
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
clocks = <&saif0>;
};
pcf8563: rtc@51 {

View File

@ -195,7 +195,7 @@
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
clocks = <&saif0>;
};
at24@51 {

View File

@ -184,7 +184,7 @@
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
clocks = <&saif0>;
};
eeprom: eeprom@51 {

View File

@ -837,6 +837,7 @@
compatible = "fsl,imx28-saif";
reg = <0x80042000 0x2000>;
interrupts = <59 80>;
#clock-cells = <0>;
clocks = <&clks 53>;
dmas = <&dma_apbx 4>;
dma-names = "rx-tx";

View File

@ -61,6 +61,16 @@
mux-int-port = <2>;
mux-ext-port = <3>;
};
clocks {
clk_26M: codec_clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <26000000>;
gpios = <&gpio4 26 1>;
};
};
};
&esdhc1 {
@ -229,6 +239,7 @@
MX51_PAD_EIM_A27__GPIO2_21 0x5
MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
>;
};
};
@ -255,7 +266,7 @@
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clock-frequency = <26000000>;
clocks = <&clk_26M>;
VDDA-supply = <&vdig_reg>;
VDDIO-supply = <&vvideo_reg>;
};

View File

@ -27,7 +27,7 @@
backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 50000 0 0>;
pwms = <&pwm2 0 50000>;
brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
default-brightness-level = <10>;
enable-gpios = <&gpio7 7 0>;

View File

@ -725,15 +725,15 @@
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5
MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
>;
};
pinctrl_uart1_2: uart1grp-2 {
fsl,pins = <
MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1c5
MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5
MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
>;
};
@ -748,8 +748,8 @@
uart2 {
pinctrl_uart2_1: uart2grp-1 {
fsl,pins = <
MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
>;
};
@ -766,17 +766,17 @@
uart3 {
pinctrl_uart3_1: uart3grp-1 {
fsl,pins = <
MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
MX53_PAD_PATA_DA_1__UART3_CTS 0x1c5
MX53_PAD_PATA_DA_2__UART3_RTS 0x1c5
MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
>;
};
pinctrl_uart3_2: uart3grp-2 {
fsl,pins = <
MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
>;
};
@ -785,8 +785,8 @@
uart4 {
pinctrl_uart4_1: uart4grp-1 {
fsl,pins = <
MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5
MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5
MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4
MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4
>;
};
};
@ -794,8 +794,8 @@
uart5 {
pinctrl_uart5_1: uart5grp-1 {
fsl,pins = <
MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5
MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5
MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4
MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4
>;
};
};

View File

@ -515,16 +515,16 @@
sirf,function = "pulse_count";
};
};
cko0_rst_pins_a: cko0_rst@0 {
cko0_rst {
sirf,pins = "cko0_rstgrp";
sirf,function = "cko0_rst";
cko0_pins_a: cko0@0 {
cko0 {
sirf,pins = "cko0grp";
sirf,function = "cko0";
};
};
cko1_rst_pins_a: cko1_rst@0 {
cko1_rst {
sirf,pins = "cko1_rstgrp";
sirf,function = "cko1_rst";
cko1_pins_a: cko1@0 {
cko1 {
sirf,pins = "cko1grp";
sirf,function = "cko1";
};
};
};

View File

@ -166,6 +166,15 @@
reg = <0x9000 0x100>;
st,bank-name = "PIO31";
};
serial2-oe {
pinctrl_serial2_oe: serial2-1 {
st,pins {
output-enable = <&PIO11 3 ALT2 OUT>;
};
};
};
};
pin-controller-rear {
@ -218,7 +227,6 @@
st,pins {
tx = <&PIO17 4 ALT2 OUT>;
rx = <&PIO17 5 ALT2 IN>;
output-enable = <&PIO11 3 ALT2 OUT>;
};
};
};

View File

@ -79,7 +79,7 @@
interrupts = <0 197 0>;
clocks = <&CLK_S_ICN_REG_0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial2>;
pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>;
};
/* SBC_UART1 */

View File

@ -47,6 +47,12 @@
regulator-max-microvolt = <3150000>;
};
vmmc2: regulator-vmmc2 {
compatible = "ti,twl4030-vmmc2";
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <3150000>;
};
vusb1v5: regulator-vusb1v5 {
compatible = "ti,twl4030-vusb1v5";
};

View File

@ -442,8 +442,8 @@
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
interrupts = <0 78 0x04>;
clocks = <&clks VF610_CLK_ENET>,
<&clks VF610_CLK_ENET>,
clocks = <&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
@ -453,8 +453,8 @@
compatible = "fsl,mvf600-fec";
reg = <0x400d1000 0x1000>;
interrupts = <0 79 0x04>;
clocks = <&clks VF610_CLK_ENET>,
<&clks VF610_CLK_ENET>,
clocks = <&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";

View File

@ -26,7 +26,6 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/edma.h>
#include <linux/err.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>

View File

@ -102,6 +102,8 @@ CONFIG_SND_SOC=m
CONFIG_SND_DAVINCI_SOC=m
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_DMADEVICES=y
CONFIG_TI_EDMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_XFS_FS=m

View File

@ -162,6 +162,8 @@ CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_RTC_CLASS=y
CONFIG_DMADEVICES=y
CONFIG_TI_EDMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_XFS_FS=m

View File

@ -53,6 +53,7 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_OMAP_OCP2SCP=y
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_SATA_AHCI_PLATFORM=y
@ -61,6 +62,7 @@ CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
CONFIG_SUN4I_EMAC=y
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_KS8851=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_MDIO_SUN4I=y
@ -89,6 +91,7 @@ CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_SIRF=y
CONFIG_I2C_TEGRA=y
CONFIG_SPI=y
CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_PL022=y
CONFIG_SPI_SIRF=y
CONFIG_SPI_TEGRA114=y
@ -111,11 +114,12 @@ CONFIG_FB_SIMPLE=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_AB8500_USB=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_OMAP_USB2=y

View File

@ -1,6 +1,8 @@
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@ -48,7 +50,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_TESTS=m
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
@ -94,8 +95,10 @@ CONFIG_I2C_GPIO=y
CONFIG_I2C_NOMADIK=y
CONFIG_DEBUG_GPIO=y
# CONFIG_HWMON is not set
CONFIG_REGULATOR=y
CONFIG_MMC=y
CONFIG_MMC_CLKGATE=y
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

View File

@ -505,7 +505,7 @@ static struct vpbe_output dm365evm_vpbe_outputs[] = {
/*
* Amplifiers on the board
*/
struct ths7303_platform_data ths7303_pdata = {
static struct ths7303_platform_data ths7303_pdata = {
.ch_1 = 3,
.ch_2 = 3,
.ch_3 = 3,

View File

@ -860,7 +860,7 @@ static struct platform_device dm355_vpbe_display = {
},
};
struct venc_platform_data dm355_venc_pdata = {
static struct venc_platform_data dm355_venc_pdata = {
.setup_pinmux = dm355_vpbe_setup_pinmux,
.setup_clock = dm355_venc_setup_clock,
};

View File

@ -1349,7 +1349,7 @@ static struct platform_device dm365_vpbe_display = {
},
};
struct venc_platform_data dm365_venc_pdata = {
static struct venc_platform_data dm365_venc_pdata = {
.setup_pinmux = dm365_vpbe_setup_pinmux,
.setup_clock = dm365_venc_setup_clock,
};

View File

@ -92,6 +92,7 @@ config SOC_EXYNOS5440
bool "SAMSUNG EXYNOS5440"
default y
depends on ARCH_EXYNOS5
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_HAS_OPP
select HAVE_ARM_ARCH_TIMER
select AUTO_ZRELADDR

View File

@ -14,7 +14,7 @@ obj- :=
obj-$(CONFIG_ARCH_EXYNOS) += common.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_S5P_PM) += pm.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o

View File

@ -58,7 +58,6 @@ static const char name_exynos5440[] = "EXYNOS5440";
static void exynos4_map_io(void);
static void exynos5_map_io(void);
static void exynos5440_map_io(void);
static int exynos_init(void);
static struct cpu_table cpu_ids[] __initdata = {
@ -95,7 +94,6 @@ static struct cpu_table cpu_ids[] __initdata = {
}, {
.idcode = EXYNOS5440_SOC_ID,
.idmask = EXYNOS5_SOC_MASK,
.map_io = exynos5440_map_io,
.init = exynos_init,
.name = name_exynos5440,
},
@ -149,11 +147,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
.pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
.length = SZ_64K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_UART,
.pfn = __phys_to_pfn(EXYNOS4_PA_UART),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
@ -268,20 +261,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
.pfn = __phys_to_pfn(EXYNOS5_PA_PMU),
.length = SZ_64K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_UART,
.pfn = __phys_to_pfn(EXYNOS5_PA_UART),
.length = SZ_512K,
.type = MT_DEVICE,
},
};
static struct map_desc exynos5440_iodesc0[] __initdata = {
{
.virtual = (unsigned long)S3C_VA_UART,
.pfn = __phys_to_pfn(EXYNOS5440_PA_UART0),
.length = SZ_512K,
.type = MT_DEVICE,
},
};
@ -388,11 +367,6 @@ static void __init exynos5_map_io(void)
iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
}
static void __init exynos5440_map_io(void)
{
iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
}
void __init exynos_init_time(void)
{
of_clk_init(NULL);

View File

@ -97,6 +97,5 @@ struct exynos_pmu_conf {
};
extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
extern void s3c_cpu_resume(void);
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */

View File

@ -25,6 +25,7 @@
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include "common.h"

View File

@ -15,8 +15,13 @@
#define PLAT_PHYS_OFFSET UL(0x40000000)
#ifndef CONFIG_ARM_LPAE
/* Maximum of 256MiB in one bank */
#define MAX_PHYSMEM_BITS 32
#define SECTION_SIZE_BITS 28
#else
#define MAX_PHYSMEM_BITS 36
#define SECTION_SIZE_BITS 31
#endif
#endif /* __ASM_ARCH_MEMORY_H */

View File

@ -217,6 +217,9 @@ static __init int exynos_pm_drvinit(void)
struct clk *pll_base;
unsigned int tmp;
if (soc_is_exynos5440())
return 0;
s3c_pm_init();
/* All wakeup disable */
@ -340,6 +343,9 @@ static struct syscore_ops exynos_pm_syscore_ops = {
static __init int exynos_pm_syscore_init(void)
{
if (soc_is_exynos5440())
return 0;
register_syscore_ops(&exynos_pm_syscore_ops);
return 0;
}

View File

@ -276,8 +276,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
sys->mem_offset = DC21285_PCI_MEM;
pci_ioremap_io(0, DC21285_PCI_IO);
pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);

View File

@ -115,6 +115,7 @@ static int highbank_platform_notifier(struct notifier_block *nb,
{
struct resource *res;
int reg = -1;
u32 val;
struct device *dev = __dev;
if (event != BUS_NOTIFY_ADD_DEVICE)
@ -141,10 +142,10 @@ static int highbank_platform_notifier(struct notifier_block *nb,
return NOTIFY_DONE;
if (of_property_read_bool(dev->of_node, "dma-coherent")) {
writel(0xff31, sregs_base + reg);
val = readl(sregs_base + reg);
writel(val | 0xff01, sregs_base + reg);
set_dma_ops(dev, &arm_coherent_dma_ops);
} else
writel(0, sregs_base + reg);
}
return NOTIFY_OK;
}

View File

@ -199,7 +199,8 @@ static const char *pcie_axi_sels[] = { "axi", "ahb", };
static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
static const char *emi_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *vdo_axi_sels[] = { "axi", "ahb", };
static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
@ -392,7 +393,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[usdhc4_sel] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
clk[emi_sel] = imx_clk_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels));
clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_sels, ARRAY_SIZE(emi_sels));
clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels));
clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));

View File

@ -183,6 +183,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);
clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23);
clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0));
clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1));
clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7));

View File

@ -135,7 +135,7 @@
#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4)
#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5)
#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6)
#define MX27_INT_SDHC (NR_IRQS_LEGACY + 7)
#define MX27_INT_MSHC (NR_IRQS_LEGACY + 7)
#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8)
#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9)
#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10)

View File

@ -49,7 +49,7 @@ static const char *keystone_match[] __initconst = {
NULL,
};
void keystone_restart(char mode, const char *cmd)
void keystone_restart(enum reboot_mode mode, const char *cmd)
{
u32 val;

View File

@ -62,7 +62,7 @@ config SOC_OMAP5
select HAVE_SMP
select COMMON_CLK
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181
select ARM_ERRATA_798181 if SMP
config SOC_AM33XX
bool "AM33XX support"

View File

@ -15,6 +15,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
#include <linux/clk.h>
#include <asm/mach/arch.h>
@ -35,6 +36,21 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
{ }
};
/*
* Create alias for USB host PHY clock.
* Remove this when clock phandle can be provided via DT
*/
static void __init legacy_init_ehci_clk(char *clkname)
{
int ret;
ret = clk_add_alias("main_clk", NULL, clkname, NULL);
if (ret) {
pr_err("%s:Failed to add main_clk alias to %s :%d\n",
__func__, clkname, ret);
}
}
static void __init omap_generic_init(void)
{
omap_sdrc_init(NULL, NULL);
@ -45,10 +61,15 @@ static void __init omap_generic_init(void)
* HACK: call display setup code for selected boards to enable omapdss.
* This will be removed when omapdss supports DT.
*/
if (of_machine_is_compatible("ti,omap4-panda"))
if (of_machine_is_compatible("ti,omap4-panda")) {
omap4_panda_display_init_of();
legacy_init_ehci_clk("auxclk3_ck");
}
else if (of_machine_is_compatible("ti,omap4-sdp"))
omap_4430sdp_display_init_of();
else if (of_machine_is_compatible("ti,omap5-uevm"))
legacy_init_ehci_clk("auxclk1_ck");
}
#ifdef CONFIG_SOC_OMAP2420

View File

@ -477,16 +477,24 @@ static int em_x270_usb_hub_init(void)
/* USB Hub power-on and reset */
gpio_direction_output(usb_hub_reset, 1);
gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
regulator_enable(em_x270_usb_ldo);
err = regulator_enable(em_x270_usb_ldo);
if (err)
goto err_free_rst_gpio;
gpio_set_value(usb_hub_reset, 0);
gpio_set_value(usb_hub_reset, 1);
regulator_disable(em_x270_usb_ldo);
regulator_enable(em_x270_usb_ldo);
err = regulator_enable(em_x270_usb_ldo);
if (err)
goto err_free_rst_gpio;
gpio_set_value(usb_hub_reset, 0);
gpio_set_value(GPIO9_USB_VBUS_EN, 1);
return 0;
err_free_rst_gpio:
gpio_free(usb_hub_reset);
err_free_vbus_gpio:
gpio_free(GPIO9_USB_VBUS_EN);
err_free_usb_ldo:
@ -592,7 +600,7 @@ err_irq:
return err;
}
static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
static int em_x270_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@ -600,10 +608,11 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
regulator_enable(em_x270_sdio_ldo);
return regulator_enable(em_x270_sdio_ldo);
} else {
regulator_disable(em_x270_sdio_ldo);
}
return 0;
}
static void em_x270_mci_exit(struct device *dev, void *data)

View File

@ -408,7 +408,7 @@ static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_in
return err;
}
static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
static int mainstone_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@ -420,6 +420,7 @@ static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
printk(KERN_DEBUG "%s: off\n", __func__);
MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
}
return 0;
}
static void mainstone_mci_exit(struct device *dev, void *data)

View File

@ -335,7 +335,7 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
return err;
}
static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
static int pcm990_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data *p_d = dev->platform_data;
u8 val;
@ -348,6 +348,7 @@ static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
val &= ~PCM990_CTRL_MMC2PWR;
pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
return 0;
}
static void pcm990_mci_exit(struct device *dev, void *data)

View File

@ -258,7 +258,7 @@ err_free_2:
return err;
}
static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
static int poodle_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@ -270,6 +270,8 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
gpio_set_value(POODLE_GPIO_SD_PWR, 0);
}
return 0;
}
static void poodle_mci_exit(struct device *dev, void *data)

View File

@ -598,7 +598,7 @@ static inline void spitz_spi_init(void) {}
* NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
* give the card a chance to fully insert/eject.
*/
static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
static int spitz_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
@ -606,6 +606,8 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
else
spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
return 0;
}
static struct pxamci_platform_data spitz_mci_platform_data = {

View File

@ -734,9 +734,10 @@ static int stargate2_mci_init(struct device *dev,
*
* Very simple control. Either it is on or off and is controlled by
* a gpio pin */
static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
static int stargate2_mci_setpower(struct device *dev, unsigned int vdd)
{
gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
return 0;
}
static void stargate2_mci_exit(struct device *dev, void *data)

View File

@ -119,66 +119,101 @@ static struct clk init_clocks_off[] = {
}
};
static struct clk init_clocks[] = {
{
.name = "lcd",
.parent = &clk_h,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_LCDC,
}, {
.name = "gpio",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_GPIO,
}, {
.name = "usb-host",
.parent = &clk_h,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_USBH,
}, {
.name = "usb-device",
.parent = &clk_h,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_USBD,
}, {
.name = "timers",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_PWMT,
}, {
.name = "uart",
.devname = "s3c2410-uart.0",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART0,
}, {
.name = "uart",
.devname = "s3c2410-uart.1",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART1,
}, {
.name = "uart",
.devname = "s3c2410-uart.2",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART2,
}, {
.name = "rtc",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_RTC,
}, {
.name = "watchdog",
.parent = &clk_p,
.ctrlbit = 0,
}, {
.name = "usb-bus-host",
.parent = &clk_usb_bus,
}, {
.name = "usb-bus-gadget",
.parent = &clk_usb_bus,
},
static struct clk clk_lcd = {
.name = "lcd",
.parent = &clk_h,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_LCDC,
};
static struct clk clk_gpio = {
.name = "gpio",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_GPIO,
};
static struct clk clk_usb_host = {
.name = "usb-host",
.parent = &clk_h,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_USBH,
};
static struct clk clk_usb_device = {
.name = "usb-device",
.parent = &clk_h,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_USBD,
};
static struct clk clk_timers = {
.name = "timers",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_PWMT,
};
struct clk s3c24xx_clk_uart0 = {
.name = "uart",
.devname = "s3c2410-uart.0",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART0,
};
struct clk s3c24xx_clk_uart1 = {
.name = "uart",
.devname = "s3c2410-uart.1",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART1,
};
struct clk s3c24xx_clk_uart2 = {
.name = "uart",
.devname = "s3c2410-uart.2",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART2,
};
static struct clk clk_rtc = {
.name = "rtc",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_RTC,
};
static struct clk clk_watchdog = {
.name = "watchdog",
.parent = &clk_p,
.ctrlbit = 0,
};
static struct clk clk_usb_bus_host = {
.name = "usb-bus-host",
.parent = &clk_usb_bus,
};
static struct clk clk_usb_bus_gadget = {
.name = "usb-bus-gadget",
.parent = &clk_usb_bus,
};
static struct clk *init_clocks[] = {
&clk_lcd,
&clk_gpio,
&clk_usb_host,
&clk_usb_device,
&clk_timers,
&s3c24xx_clk_uart0,
&s3c24xx_clk_uart1,
&s3c24xx_clk_uart2,
&clk_rtc,
&clk_watchdog,
&clk_usb_bus_host,
&clk_usb_bus_gadget,
};
/* s3c2410_baseclk_add()
@ -195,7 +230,6 @@ int __init s3c2410_baseclk_add(void)
{
unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
struct clk *clkp;
struct clk *xtal;
int ret;
int ptr;
@ -207,8 +241,9 @@ int __init s3c2410_baseclk_add(void)
/* register clocks from clock array */
clkp = init_clocks;
for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
struct clk *clkp = init_clocks[ptr];
/* ensure that we note the clock state */
clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;

View File

@ -166,6 +166,9 @@ static struct clk_lookup s3c2440_clk_lookup[] = {
CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
};

View File

@ -11,8 +11,9 @@ menuconfig ARCH_STI
select HAVE_SMP
select HAVE_ARM_SCU if SMP
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_720789
select ARM_ERRATA_754322
select ARM_ERRATA_764369
select ARM_ERRATA_775420
select PL310_ERRATA_753970 if CACHE_PL310
select PL310_ERRATA_769419 if CACHE_PL310
help

View File

@ -91,7 +91,7 @@ static void __init zynq_map_io(void)
zynq_scu_map_io();
}
static void zynq_system_reset(char mode, const char *cmd)
static void zynq_system_reset(enum reboot_mode mode, const char *cmd)
{
zynq_slcr_system_reset();
}

View File

@ -29,6 +29,13 @@ config PLAT_S5P
help
Base platform code for Samsung's S5P series SoC.
config SAMSUNG_PM
bool
depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || S5P_PM)
default y
help
Base platform power management code for samsung code
if PLAT_SAMSUNG
# boot configurations

View File

@ -51,7 +51,7 @@ obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o
# PM support
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_SAMSUNG_PM) += pm.o
obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o

View File

@ -83,6 +83,11 @@ extern struct clk clk_ext;
extern struct clksrc_clk clk_epllref;
extern struct clksrc_clk clk_esysclk;
/* S3C24XX UART clocks */
extern struct clk s3c24xx_clk_uart0;
extern struct clk s3c24xx_clk_uart1;
extern struct clk s3c24xx_clk_uart2;
/* S3C64XX specific clocks */
extern struct clk clk_h2;
extern struct clk clk_27m;

View File

@ -19,7 +19,7 @@
struct device;
#ifdef CONFIG_PM
#ifdef CONFIG_SAMSUNG_PM
extern __init int s3c_pm_init(void);
extern __init int s3c64xx_pm_init(void);
@ -58,8 +58,6 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */
/* from sleep.S */
extern void s3c_cpu_resume(void);
extern int s3c2410_cpu_suspend(unsigned long);
/* sleep save info */
@ -106,12 +104,14 @@ extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
#ifdef CONFIG_PM
#ifdef CONFIG_SAMSUNG_PM
extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
extern void s3c_cpu_resume(void);
#else
#define s3c_irq_wake NULL
#define s3c_irqext_wake NULL
#define s3c_cpu_resume NULL
#endif
/* PM debug functions */

View File

@ -80,7 +80,7 @@ unsigned char pm_uart_udivslot;
#ifdef CONFIG_SAMSUNG_PM_DEBUG
static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
static struct pm_uart_save uart_save;
static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
{
@ -101,11 +101,7 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
static void s3c_pm_save_uarts(void)
{
struct pm_uart_save *save = uart_save;
unsigned int uart;
for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
s3c_pm_save_uart(uart, save);
s3c_pm_save_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
}
static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
@ -126,11 +122,7 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
static void s3c_pm_restore_uarts(void)
{
struct pm_uart_save *save = uart_save;
unsigned int uart;
for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
s3c_pm_restore_uart(uart, save);
s3c_pm_restore_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
}
#else
static void s3c_pm_save_uarts(void) { }

View File

@ -24,10 +24,10 @@
#include <linux/compiler.h>
#ifndef CONFIG_ARM64_64K_PAGES
#define THREAD_SIZE_ORDER 1
#define THREAD_SIZE_ORDER 2
#endif
#define THREAD_SIZE 8192
#define THREAD_SIZE 16384
#define THREAD_START_SP (THREAD_SIZE - 16)
#ifndef __ASSEMBLY__

View File

@ -21,6 +21,7 @@
#define BOOT_CPU_MODE_EL2 (0x0e12b007)
#ifndef __ASSEMBLY__
#include <asm/cacheflush.h>
/*
* __boot_cpu_mode records what mode CPUs were booted in.
@ -36,9 +37,20 @@ extern u32 __boot_cpu_mode[2];
void __hyp_set_vectors(phys_addr_t phys_vector_base);
phys_addr_t __hyp_get_vectors(void);
static inline void sync_boot_mode(void)
{
/*
* As secondaries write to __boot_cpu_mode with caches disabled, we
* must flush the corresponding cache entries to ensure the visibility
* of their writes.
*/
__flush_dcache_area(__boot_cpu_mode, sizeof(__boot_cpu_mode));
}
/* Reports the availability of HYP mode */
static inline bool is_hyp_mode_available(void)
{
sync_boot_mode();
return (__boot_cpu_mode[0] == BOOT_CPU_MODE_EL2 &&
__boot_cpu_mode[1] == BOOT_CPU_MODE_EL2);
}
@ -46,6 +58,7 @@ static inline bool is_hyp_mode_available(void)
/* Check if the bootloader has booted CPUs in different modes */
static inline bool is_hyp_mode_mismatched(void)
{
sync_boot_mode();
return __boot_cpu_mode[0] != __boot_cpu_mode[1];
}

View File

@ -121,7 +121,7 @@
.macro get_thread_info, rd
mov \rd, sp
and \rd, \rd, #~((1 << 13) - 1) // top of 8K stack
and \rd, \rd, #~(THREAD_SIZE - 1) // top of stack
.endm
/*

View File

@ -81,7 +81,7 @@ void soft_restart(unsigned long addr)
void (*pm_power_off)(void);
EXPORT_SYMBOL_GPL(pm_power_off);
void (*arm_pm_restart)(char str, const char *cmd);
void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
EXPORT_SYMBOL_GPL(arm_pm_restart);
void arch_cpu_idle_prepare(void)

View File

@ -55,6 +55,8 @@ struct device_node;
#define EEH_PE_RECOVERING (1 << 1) /* Recovering PE */
#define EEH_PE_PHB_DEAD (1 << 2) /* Dead PHB */
#define EEH_PE_KEEP (1 << 8) /* Keep PE on hotplug */
struct eeh_pe {
int type; /* PE type: PHB/Bus/Device */
int state; /* PE EEH dependent mode */
@ -72,8 +74,8 @@ struct eeh_pe {
struct list_head child; /* Child PEs */
};
#define eeh_pe_for_each_dev(pe, edev) \
list_for_each_entry(edev, &pe->edevs, list)
#define eeh_pe_for_each_dev(pe, edev, tmp) \
list_for_each_entry_safe(edev, tmp, &pe->edevs, list)
/*
* The struct is used to trace EEH state for the associated
@ -82,7 +84,13 @@ struct eeh_pe {
* another tree except the currently existing tree of PCI
* buses and PCI devices
*/
#define EEH_DEV_IRQ_DISABLED (1<<0) /* Interrupt disabled */
#define EEH_DEV_BRIDGE (1 << 0) /* PCI bridge */
#define EEH_DEV_ROOT_PORT (1 << 1) /* PCIe root port */
#define EEH_DEV_DS_PORT (1 << 2) /* Downstream port */
#define EEH_DEV_IRQ_DISABLED (1 << 3) /* Interrupt disabled */
#define EEH_DEV_DISCONNECTED (1 << 4) /* Removing from PE */
#define EEH_DEV_SYSFS (1 << 8) /* Sysfs created */
struct eeh_dev {
int mode; /* EEH mode */
@ -90,11 +98,13 @@ struct eeh_dev {
int config_addr; /* Config address */
int pe_config_addr; /* PE config address */
u32 config_space[16]; /* Saved PCI config space */
u8 pcie_cap; /* Saved PCIe capability */
struct eeh_pe *pe; /* Associated PE */
struct list_head list; /* Form link list in the PE */
struct pci_controller *phb; /* Associated PHB */
struct device_node *dn; /* Associated device node */
struct pci_dev *pdev; /* Associated PCI device */
struct pci_bus *bus; /* PCI bus for partial hotplug */
};
static inline struct device_node *eeh_dev_to_of_node(struct eeh_dev *edev)
@ -193,8 +203,10 @@ int eeh_phb_pe_create(struct pci_controller *phb);
struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb);
struct eeh_pe *eeh_pe_get(struct eeh_dev *edev);
int eeh_add_to_parent_pe(struct eeh_dev *edev);
int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe);
int eeh_rmv_from_parent_pe(struct eeh_dev *edev);
void eeh_pe_update_time_stamp(struct eeh_pe *pe);
void *eeh_pe_traverse(struct eeh_pe *root,
eeh_traverse_func fn, void *flag);
void *eeh_pe_dev_traverse(struct eeh_pe *root,
eeh_traverse_func fn, void *flag);
void eeh_pe_restore_bars(struct eeh_pe *pe);
@ -209,10 +221,12 @@ unsigned long eeh_check_failure(const volatile void __iomem *token,
unsigned long val);
int eeh_dev_check_failure(struct eeh_dev *edev);
void eeh_addr_cache_build(void);
void eeh_add_device_early(struct device_node *);
void eeh_add_device_tree_early(struct device_node *);
void eeh_add_device_late(struct pci_dev *);
void eeh_add_device_tree_late(struct pci_bus *);
void eeh_add_sysfs_files(struct pci_bus *);
void eeh_remove_bus_device(struct pci_dev *, int);
void eeh_remove_device(struct pci_dev *);
/**
* EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
@ -252,13 +266,17 @@ static inline unsigned long eeh_check_failure(const volatile void __iomem *token
static inline void eeh_addr_cache_build(void) { }
static inline void eeh_add_device_early(struct device_node *dn) { }
static inline void eeh_add_device_tree_early(struct device_node *dn) { }
static inline void eeh_add_device_late(struct pci_dev *dev) { }
static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
static inline void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe) { }
static inline void eeh_remove_device(struct pci_dev *dev) { }
#define EEH_POSSIBLE_ERROR(val, type) (0)
#define EEH_IO_ERROR_VALUE(size) (-1UL)

View File

@ -96,10 +96,11 @@ static inline bool arch_irqs_disabled(void)
#endif
#define hard_irq_disable() do { \
u8 _was_enabled = get_paca()->soft_enabled; \
u8 _was_enabled; \
__hard_irq_disable(); \
get_paca()->soft_enabled = 0; \
get_paca()->irq_happened |= PACA_IRQ_HARD_DIS; \
_was_enabled = local_paca->soft_enabled; \
local_paca->soft_enabled = 0; \
local_paca->irq_happened |= PACA_IRQ_HARD_DIS; \
if (_was_enabled) \
trace_hardirqs_off(); \
} while(0)

View File

@ -82,10 +82,9 @@ struct exception_table_entry;
void sort_ex_table(struct exception_table_entry *start,
struct exception_table_entry *finish);
#ifdef CONFIG_MODVERSIONS
#if defined(CONFIG_MODVERSIONS) && defined(CONFIG_PPC64)
#define ARCH_RELOCATES_KCRCTAB
extern const unsigned long reloc_start[];
#define reloc_start PHYSICAL_START
#endif
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_MODULE_H */

View File

@ -209,7 +209,6 @@ static inline struct eeh_dev *of_node_to_eeh_dev(struct device_node *dn)
extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);
/** Remove all of the PCI devices under this bus */
extern void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe);
extern void pcibios_remove_pci_devices(struct pci_bus *bus);
/** Discover new pci devices under this bus, and add them */

View File

@ -1088,7 +1088,8 @@
#define PVR_970MP 0x0044
#define PVR_970GX 0x0045
#define PVR_POWER7p 0x004A
#define PVR_POWER8 0x004B
#define PVR_POWER8E 0x004B
#define PVR_POWER8 0x004D
#define PVR_BE 0x0070
#define PVR_PA6T 0x0090

View File

@ -494,9 +494,27 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_restore = __restore_cpu_power7,
.platform = "power7+",
},
{ /* Power8 */
{ /* Power8E */
.pvr_mask = 0xffff0000,
.pvr_value = 0x004b0000,
.cpu_name = "POWER8E (raw)",
.cpu_features = CPU_FTRS_POWER8,
.cpu_user_features = COMMON_USER_POWER8,
.cpu_user_features2 = COMMON_USER2_POWER8,
.mmu_features = MMU_FTRS_POWER8,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.pmc_type = PPC_PMC_IBM,
.oprofile_cpu_type = "ppc64/power8",
.oprofile_type = PPC_OPROFILE_INVALID,
.cpu_setup = __setup_cpu_power8,
.cpu_restore = __restore_cpu_power8,
.platform = "power8",
},
{ /* Power8 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x004d0000,
.cpu_name = "POWER8 (raw)",
.cpu_features = CPU_FTRS_POWER8,
.cpu_user_features = COMMON_USER_POWER8,

View File

@ -231,7 +231,7 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
{
size_t loglen = 0;
struct eeh_dev *edev;
struct eeh_dev *edev, *tmp;
bool valid_cfg_log = true;
/*
@ -251,7 +251,7 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
eeh_pe_restore_bars(pe);
pci_regs_buf[0] = 0;
eeh_pe_for_each_dev(pe, edev) {
eeh_pe_for_each_dev(pe, edev, tmp) {
loglen += eeh_gather_pci_data(edev, pci_regs_buf + loglen,
EEH_PCI_REGS_LOG_LEN - loglen);
}
@ -499,8 +499,6 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
}
eeh_dev_check_failure(edev);
pci_dev_put(eeh_dev_to_pci_dev(edev));
return val;
}
@ -838,7 +836,7 @@ core_initcall_sync(eeh_init);
* on the CEC architecture, type of the device, on earlier boot
* command-line arguments & etc.
*/
static void eeh_add_device_early(struct device_node *dn)
void eeh_add_device_early(struct device_node *dn)
{
struct pci_controller *phb;
@ -886,7 +884,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
* This routine must be used to complete EEH initialization for PCI
* devices that were added after system boot (e.g. hotplug, dlpar).
*/
static void eeh_add_device_late(struct pci_dev *dev)
void eeh_add_device_late(struct pci_dev *dev)
{
struct device_node *dn;
struct eeh_dev *edev;
@ -902,9 +900,23 @@ static void eeh_add_device_late(struct pci_dev *dev)
pr_debug("EEH: Already referenced !\n");
return;
}
WARN_ON(edev->pdev);
pci_dev_get(dev);
/*
* The EEH cache might not be removed correctly because of
* unbalanced kref to the device during unplug time, which
* relies on pcibios_release_device(). So we have to remove
* that here explicitly.
*/
if (edev->pdev) {
eeh_rmv_from_parent_pe(edev);
eeh_addr_cache_rmv_dev(edev->pdev);
eeh_sysfs_remove_device(edev->pdev);
edev->mode &= ~EEH_DEV_SYSFS;
edev->pdev = NULL;
dev->dev.archdata.edev = NULL;
}
edev->pdev = dev;
dev->dev.archdata.edev = edev;
@ -967,7 +979,6 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
/**
* eeh_remove_device - Undo EEH setup for the indicated pci device
* @dev: pci device to be removed
* @purge_pe: remove the PE or not
*
* This routine should be called when a device is removed from
* a running system (e.g. by hotplug or dlpar). It unregisters
@ -975,7 +986,7 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
* this device will no longer be detected after this call; thus,
* i/o errors affecting this slot may leave this device unusable.
*/
static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
void eeh_remove_device(struct pci_dev *dev)
{
struct eeh_dev *edev;
@ -986,42 +997,29 @@ static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
/* Unregister the device with the EEH/PCI address search system */
pr_debug("EEH: Removing device %s\n", pci_name(dev));
if (!edev || !edev->pdev) {
if (!edev || !edev->pdev || !edev->pe) {
pr_debug("EEH: Not referenced !\n");
return;
}
/*
* During the hotplug for EEH error recovery, we need the EEH
* device attached to the parent PE in order for BAR restore
* a bit later. So we keep it for BAR restore and remove it
* from the parent PE during the BAR resotre.
*/
edev->pdev = NULL;
dev->dev.archdata.edev = NULL;
pci_dev_put(dev);
if (!(edev->pe->state & EEH_PE_KEEP))
eeh_rmv_from_parent_pe(edev);
else
edev->mode |= EEH_DEV_DISCONNECTED;
eeh_rmv_from_parent_pe(edev, purge_pe);
eeh_addr_cache_rmv_dev(dev);
eeh_sysfs_remove_device(dev);
edev->mode &= ~EEH_DEV_SYSFS;
}
/**
* eeh_remove_bus_device - Undo EEH setup for the indicated PCI device
* @dev: PCI device
* @purge_pe: remove the corresponding PE or not
*
* This routine must be called when a device is removed from the
* running system through hotplug or dlpar. The corresponding
* PCI address cache will be removed.
*/
void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe)
{
struct pci_bus *bus = dev->subordinate;
struct pci_dev *child, *tmp;
eeh_remove_device(dev, purge_pe);
if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
eeh_remove_bus_device(child, purge_pe);
}
}
EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
static int proc_eeh_show(struct seq_file *m, void *v)
{
if (0 == eeh_subsystem_enabled) {

View File

@ -68,16 +68,12 @@ static inline struct eeh_dev *__eeh_addr_cache_get_device(unsigned long addr)
struct pci_io_addr_range *piar;
piar = rb_entry(n, struct pci_io_addr_range, rb_node);
if (addr < piar->addr_lo) {
if (addr < piar->addr_lo)
n = n->rb_left;
} else {
if (addr > piar->addr_hi) {
n = n->rb_right;
} else {
pci_dev_get(piar->pcidev);
return piar->edev;
}
}
else if (addr > piar->addr_hi)
n = n->rb_right;
else
return piar->edev;
}
return NULL;
@ -156,7 +152,6 @@ eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
if (!piar)
return NULL;
pci_dev_get(dev);
piar->addr_lo = alo;
piar->addr_hi = ahi;
piar->edev = pci_dev_to_eeh_dev(dev);
@ -250,7 +245,6 @@ restart:
if (piar->pcidev == dev) {
rb_erase(n, &pci_io_addr_cache_root.rb_root);
pci_dev_put(piar->pcidev);
kfree(piar);
goto restart;
}
@ -302,12 +296,10 @@ void eeh_addr_cache_build(void)
if (!edev)
continue;
pci_dev_get(dev); /* matching put is in eeh_remove_device() */
dev->dev.archdata.edev = edev;
edev->pdev = dev;
eeh_addr_cache_insert_dev(dev);
eeh_sysfs_add_device(dev);
}

View File

@ -143,10 +143,14 @@ static void eeh_disable_irq(struct pci_dev *dev)
static void eeh_enable_irq(struct pci_dev *dev)
{
struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
struct irq_desc *desc;
if ((edev->mode) & EEH_DEV_IRQ_DISABLED) {
edev->mode &= ~EEH_DEV_IRQ_DISABLED;
enable_irq(dev->irq);
desc = irq_to_desc(dev->irq);
if (desc && desc->depth > 0)
enable_irq(dev->irq);
}
}
@ -338,6 +342,54 @@ static void *eeh_report_failure(void *data, void *userdata)
return NULL;
}
static void *eeh_rmv_device(void *data, void *userdata)
{
struct pci_driver *driver;
struct eeh_dev *edev = (struct eeh_dev *)data;
struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
int *removed = (int *)userdata;
/*
* Actually, we should remove the PCI bridges as well.
* However, that's lots of complexity to do that,
* particularly some of devices under the bridge might
* support EEH. So we just care about PCI devices for
* simplicity here.
*/
if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE))
return NULL;
driver = eeh_pcid_get(dev);
if (driver && driver->err_handler)
return NULL;
/* Remove it from PCI subsystem */
pr_debug("EEH: Removing %s without EEH sensitive driver\n",
pci_name(dev));
edev->bus = dev->bus;
edev->mode |= EEH_DEV_DISCONNECTED;
(*removed)++;
pci_stop_and_remove_bus_device(dev);
return NULL;
}
static void *eeh_pe_detach_dev(void *data, void *userdata)
{
struct eeh_pe *pe = (struct eeh_pe *)data;
struct eeh_dev *edev, *tmp;
eeh_pe_for_each_dev(pe, edev, tmp) {
if (!(edev->mode & EEH_DEV_DISCONNECTED))
continue;
edev->mode &= ~(EEH_DEV_DISCONNECTED | EEH_DEV_IRQ_DISABLED);
eeh_rmv_from_parent_pe(edev);
}
return NULL;
}
/**
* eeh_reset_device - Perform actual reset of a pci slot
* @pe: EEH PE
@ -349,8 +401,9 @@ static void *eeh_report_failure(void *data, void *userdata)
*/
static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
{
struct pci_bus *frozen_bus = eeh_pe_bus_get(pe);
struct timeval tstamp;
int cnt, rc;
int cnt, rc, removed = 0;
/* pcibios will clear the counter; save the value */
cnt = pe->freeze_count;
@ -362,8 +415,11 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
* devices are expected to be attached soon when calling
* into pcibios_add_pci_devices().
*/
eeh_pe_state_mark(pe, EEH_PE_KEEP);
if (bus)
__pcibios_remove_pci_devices(bus, 0);
pcibios_remove_pci_devices(bus);
else if (frozen_bus)
eeh_pe_dev_traverse(pe, eeh_rmv_device, &removed);
/* Reset the pci controller. (Asserts RST#; resets config space).
* Reconfigure bridges and devices. Don't try to bring the system
@ -384,9 +440,24 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
* potentially weird things happen.
*/
if (bus) {
pr_info("EEH: Sleep 5s ahead of complete hotplug\n");
ssleep(5);
/*
* The EEH device is still connected with its parent
* PE. We should disconnect it so the binding can be
* rebuilt when adding PCI devices.
*/
eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL);
pcibios_add_pci_devices(bus);
} else if (frozen_bus && removed) {
pr_info("EEH: Sleep 5s ahead of partial hotplug\n");
ssleep(5);
eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL);
pcibios_add_pci_devices(frozen_bus);
}
eeh_pe_state_clear(pe, EEH_PE_KEEP);
pe->tstamp = tstamp;
pe->freeze_count = cnt;

View File

@ -149,8 +149,8 @@ static struct eeh_pe *eeh_pe_next(struct eeh_pe *pe,
* callback returns something other than NULL, or no more PEs
* to be traversed.
*/
static void *eeh_pe_traverse(struct eeh_pe *root,
eeh_traverse_func fn, void *flag)
void *eeh_pe_traverse(struct eeh_pe *root,
eeh_traverse_func fn, void *flag)
{
struct eeh_pe *pe;
void *ret;
@ -176,7 +176,7 @@ void *eeh_pe_dev_traverse(struct eeh_pe *root,
eeh_traverse_func fn, void *flag)
{
struct eeh_pe *pe;
struct eeh_dev *edev;
struct eeh_dev *edev, *tmp;
void *ret;
if (!root) {
@ -186,7 +186,7 @@ void *eeh_pe_dev_traverse(struct eeh_pe *root,
/* Traverse root PE */
for (pe = root; pe; pe = eeh_pe_next(pe, root)) {
eeh_pe_for_each_dev(pe, edev) {
eeh_pe_for_each_dev(pe, edev, tmp) {
ret = fn(edev, flag);
if (ret)
return ret;
@ -333,7 +333,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
while (parent) {
if (!(parent->type & EEH_PE_INVALID))
break;
parent->type &= ~EEH_PE_INVALID;
parent->type &= ~(EEH_PE_INVALID | EEH_PE_KEEP);
parent = parent->parent;
}
pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
@ -397,21 +397,20 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
/**
* eeh_rmv_from_parent_pe - Remove one EEH device from the associated PE
* @edev: EEH device
* @purge_pe: remove PE or not
*
* The PE hierarchy tree might be changed when doing PCI hotplug.
* Also, the PCI devices or buses could be removed from the system
* during EEH recovery. So we have to call the function remove the
* corresponding PE accordingly if necessary.
*/
int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
{
struct eeh_pe *pe, *parent, *child;
int cnt;
if (!edev->pe) {
pr_warning("%s: No PE found for EEH device %s\n",
__func__, edev->dn->full_name);
pr_debug("%s: No PE found for EEH device %s\n",
__func__, edev->dn->full_name);
return -EEXIST;
}
@ -431,7 +430,7 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
if (pe->type & EEH_PE_PHB)
break;
if (purge_pe) {
if (!(pe->state & EEH_PE_KEEP)) {
if (list_empty(&pe->edevs) &&
list_empty(&pe->child_list)) {
list_del(&pe->child);
@ -502,7 +501,7 @@ static void *__eeh_pe_state_mark(void *data, void *flag)
{
struct eeh_pe *pe = (struct eeh_pe *)data;
int state = *((int *)flag);
struct eeh_dev *tmp;
struct eeh_dev *edev, *tmp;
struct pci_dev *pdev;
/*
@ -512,8 +511,8 @@ static void *__eeh_pe_state_mark(void *data, void *flag)
* the PCI device driver.
*/
pe->state |= state;
eeh_pe_for_each_dev(pe, tmp) {
pdev = eeh_dev_to_pci_dev(tmp);
eeh_pe_for_each_dev(pe, edev, tmp) {
pdev = eeh_dev_to_pci_dev(edev);
if (pdev)
pdev->error_state = pci_channel_io_frozen;
}
@ -579,7 +578,7 @@ void eeh_pe_state_clear(struct eeh_pe *pe, int state)
* blocked on normal path during the stage. So we need utilize
* eeh operations, which is always permitted.
*/
static void eeh_bridge_check_link(struct pci_dev *pdev,
static void eeh_bridge_check_link(struct eeh_dev *edev,
struct device_node *dn)
{
int cap;
@ -590,16 +589,17 @@ static void eeh_bridge_check_link(struct pci_dev *pdev,
* We only check root port and downstream ports of
* PCIe switches
*/
if (!pci_is_pcie(pdev) ||
(pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT &&
pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM))
if (!(edev->mode & (EEH_DEV_ROOT_PORT | EEH_DEV_DS_PORT)))
return;
pr_debug("%s: Check PCIe link for %s ...\n",
__func__, pci_name(pdev));
pr_debug("%s: Check PCIe link for %04x:%02x:%02x.%01x ...\n",
__func__, edev->phb->global_number,
edev->config_addr >> 8,
PCI_SLOT(edev->config_addr & 0xFF),
PCI_FUNC(edev->config_addr & 0xFF));
/* Check slot status */
cap = pdev->pcie_cap;
cap = edev->pcie_cap;
eeh_ops->read_config(dn, cap + PCI_EXP_SLTSTA, 2, &val);
if (!(val & PCI_EXP_SLTSTA_PDS)) {
pr_debug(" No card in the slot (0x%04x) !\n", val);
@ -653,8 +653,7 @@ static void eeh_bridge_check_link(struct pci_dev *pdev,
#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
#define SAVED_BYTE(OFF) (((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
static void eeh_restore_bridge_bars(struct pci_dev *pdev,
struct eeh_dev *edev,
static void eeh_restore_bridge_bars(struct eeh_dev *edev,
struct device_node *dn)
{
int i;
@ -680,7 +679,7 @@ static void eeh_restore_bridge_bars(struct pci_dev *pdev,
eeh_ops->write_config(dn, PCI_COMMAND, 4, edev->config_space[1]);
/* Check the PCIe link is ready */
eeh_bridge_check_link(pdev, dn);
eeh_bridge_check_link(edev, dn);
}
static void eeh_restore_device_bars(struct eeh_dev *edev,
@ -729,19 +728,12 @@ static void eeh_restore_device_bars(struct eeh_dev *edev,
*/
static void *eeh_restore_one_device_bars(void *data, void *flag)
{
struct pci_dev *pdev = NULL;
struct eeh_dev *edev = (struct eeh_dev *)data;
struct device_node *dn = eeh_dev_to_of_node(edev);
/* Trace the PCI bridge */
if (eeh_probe_mode_dev()) {
pdev = eeh_dev_to_pci_dev(edev);
if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
pdev = NULL;
}
if (pdev)
eeh_restore_bridge_bars(pdev, edev, dn);
/* Do special restore for bridges */
if (edev->mode & EEH_DEV_BRIDGE)
eeh_restore_bridge_bars(edev, dn);
else
eeh_restore_device_bars(edev, dn);

View File

@ -56,19 +56,40 @@ EEH_SHOW_ATTR(eeh_pe_config_addr, pe_config_addr, "0x%x");
void eeh_sysfs_add_device(struct pci_dev *pdev)
{
struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
int rc=0;
if (edev && (edev->mode & EEH_DEV_SYSFS))
return;
rc += device_create_file(&pdev->dev, &dev_attr_eeh_mode);
rc += device_create_file(&pdev->dev, &dev_attr_eeh_config_addr);
rc += device_create_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
if (rc)
printk(KERN_WARNING "EEH: Unable to create sysfs entries\n");
else if (edev)
edev->mode |= EEH_DEV_SYSFS;
}
void eeh_sysfs_remove_device(struct pci_dev *pdev)
{
struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
/*
* The parent directory might have been removed. We needn't
* continue for that case.
*/
if (!pdev->dev.kobj.sd) {
if (edev)
edev->mode &= ~EEH_DEV_SYSFS;
return;
}
device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
device_remove_file(&pdev->dev, &dev_attr_eeh_config_addr);
device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
if (edev)
edev->mode &= ~EEH_DEV_SYSFS;
}

View File

@ -1462,6 +1462,8 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus)
/* Allocate bus and devices resources */
pcibios_allocate_bus_resources(bus);
pcibios_claim_one_bus(bus);
if (!pci_has_flag(PCI_PROBE_ONLY))
pci_assign_unassigned_bus_resources(bus);
/* Fixup EEH */
eeh_add_device_tree_late(bus);

View File

@ -22,32 +22,14 @@
#include <asm/eeh.h>
/**
* __pcibios_remove_pci_devices - remove all devices under this bus
* @bus: the indicated PCI bus
* @purge_pe: destroy the PE on removal of PCI devices
* pcibios_release_device - release PCI device
* @dev: PCI device
*
* Remove all of the PCI devices under this bus both from the
* linux pci device tree, and from the powerpc EEH address cache.
* By default, the corresponding PE will be destroied during the
* normal PCI hotplug path. For PCI hotplug during EEH recovery,
* the corresponding PE won't be destroied and deallocated.
* The function is called before releasing the indicated PCI device.
*/
void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe)
void pcibios_release_device(struct pci_dev *dev)
{
struct pci_dev *dev, *tmp;
struct pci_bus *child_bus;
/* First go down child busses */
list_for_each_entry(child_bus, &bus->children, node)
__pcibios_remove_pci_devices(child_bus, purge_pe);
pr_debug("PCI: Removing devices on bus %04x:%02x\n",
pci_domain_nr(bus), bus->number);
list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
pr_debug(" * Removing %s...\n", pci_name(dev));
eeh_remove_bus_device(dev, purge_pe);
pci_stop_and_remove_bus_device(dev);
}
eeh_remove_device(dev);
}
/**
@ -59,8 +41,21 @@ void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe)
*/
void pcibios_remove_pci_devices(struct pci_bus *bus)
{
__pcibios_remove_pci_devices(bus, 1);
struct pci_dev *dev, *tmp;
struct pci_bus *child_bus;
/* First go down child busses */
list_for_each_entry(child_bus, &bus->children, node)
pcibios_remove_pci_devices(child_bus);
pr_debug("PCI: Removing devices on bus %04x:%02x\n",
pci_domain_nr(bus), bus->number);
list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
pr_debug(" Removing %s...\n", pci_name(dev));
pci_stop_and_remove_bus_device(dev);
}
}
EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
/**
@ -76,7 +71,7 @@ EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
*/
void pcibios_add_pci_devices(struct pci_bus * bus)
{
int slotno, num, mode, pass, max;
int slotno, mode, pass, max;
struct pci_dev *dev;
struct device_node *dn = pci_bus_to_OF_node(bus);
@ -90,11 +85,15 @@ void pcibios_add_pci_devices(struct pci_bus * bus)
/* use ofdt-based probe */
of_rescan_bus(dn, bus);
} else if (mode == PCI_PROBE_NORMAL) {
/* use legacy probe */
/*
* Use legacy probe. In the partial hotplug case, we
* probably have grandchildren devices unplugged. So
* we don't check the return value from pci_scan_slot() in
* order for fully rescan all the way down to pick them up.
* They can have been removed during partial hotplug.
*/
slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
if (!num)
return;
pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
pcibios_setup_bus_devices(bus);
max = bus->busn_res.start;
for (pass = 0; pass < 2; pass++) {

View File

@ -230,11 +230,14 @@ void of_scan_pci_bridge(struct pci_dev *dev)
return;
}
bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
bus = pci_find_bus(pci_domain_nr(dev->bus), busrange[0]);
if (!bus) {
printk(KERN_ERR "Failed to create pci bus for %s\n",
node->full_name);
return;
bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
if (!bus) {
printk(KERN_ERR "Failed to create pci bus for %s\n",
node->full_name);
return;
}
}
bus->primary = dev->bus->number;
@ -292,6 +295,38 @@ void of_scan_pci_bridge(struct pci_dev *dev)
}
EXPORT_SYMBOL(of_scan_pci_bridge);
static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus,
struct device_node *dn)
{
struct pci_dev *dev = NULL;
const u32 *reg;
int reglen, devfn;
pr_debug(" * %s\n", dn->full_name);
if (!of_device_is_available(dn))
return NULL;
reg = of_get_property(dn, "reg", &reglen);
if (reg == NULL || reglen < 20)
return NULL;
devfn = (reg[0] >> 8) & 0xff;
/* Check if the PCI device is already there */
dev = pci_get_slot(bus, devfn);
if (dev) {
pci_dev_put(dev);
return dev;
}
/* create a new pci_dev for this device */
dev = of_create_pci_dev(dn, bus, devfn);
if (!dev)
return NULL;
pr_debug(" dev header type: %x\n", dev->hdr_type);
return dev;
}
/**
* __of_scan_bus - given a PCI bus node, setup bus and scan for child devices
* @node: device tree node for the PCI bus
@ -302,8 +337,6 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus,
int rescan_existing)
{
struct device_node *child;
const u32 *reg;
int reglen, devfn;
struct pci_dev *dev;
pr_debug("of_scan_bus(%s) bus no %d...\n",
@ -311,16 +344,7 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus,
/* Scan direct children */
for_each_child_of_node(node, child) {
pr_debug(" * %s\n", child->full_name);
if (!of_device_is_available(child))
continue;
reg = of_get_property(child, "reg", &reglen);
if (reg == NULL || reglen < 20)
continue;
devfn = (reg[0] >> 8) & 0xff;
/* create a new pci_dev for this device */
dev = of_create_pci_dev(child, bus, devfn);
dev = of_scan_pci_dev(bus, child);
if (!dev)
continue;
pr_debug(" dev header type: %x\n", dev->hdr_type);

View File

@ -644,7 +644,8 @@ unsigned char ibm_architecture_vec[] = {
W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */
W(0xffff0000), W(0x003e0000), /* POWER6 */
W(0xffff0000), W(0x003f0000), /* POWER7 */
W(0xffff0000), W(0x004b0000), /* POWER8 */
W(0xffff0000), W(0x004b0000), /* POWER8E */
W(0xffff0000), W(0x004d0000), /* POWER8 */
W(0xffffffff), W(0x0f000004), /* all 2.07-compliant */
W(0xffffffff), W(0x0f000003), /* all 2.06-compliant */
W(0xffffffff), W(0x0f000002), /* all 2.05-compliant */
@ -706,7 +707,7 @@ unsigned char ibm_architecture_vec[] = {
* must match by the macro below. Update the definition if
* the structure layout changes.
*/
#define IBM_ARCH_VEC_NRCORES_OFFSET 117
#define IBM_ARCH_VEC_NRCORES_OFFSET 125
W(NR_CPUS), /* number of cores supported */
0,
0,

View File

@ -38,9 +38,6 @@ jiffies = jiffies_64 + 4;
#endif
SECTIONS
{
. = 0;
reloc_start = .;
. = KERNELBASE;
/*

View File

@ -43,6 +43,7 @@ static inline void __tlbie(unsigned long vpn, int psize, int apsize, int ssize)
{
unsigned long va;
unsigned int penc;
unsigned long sllp;
/*
* We need 14 to 65 bits of va for a tlibe of 4K page
@ -64,7 +65,9 @@ static inline void __tlbie(unsigned long vpn, int psize, int apsize, int ssize)
/* clear out bits after (52) [0....52.....63] */
va &= ~((1ul << (64 - 52)) - 1);
va |= ssize << 8;
va |= mmu_psize_defs[apsize].sllp << 6;
sllp = ((mmu_psize_defs[apsize].sllp & SLB_VSID_L) >> 6) |
((mmu_psize_defs[apsize].sllp & SLB_VSID_LP) >> 4);
va |= sllp << 5;
asm volatile(ASM_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0), %2)
: : "r" (va), "r"(0), "i" (CPU_FTR_ARCH_206)
: "memory");
@ -98,6 +101,7 @@ static inline void __tlbiel(unsigned long vpn, int psize, int apsize, int ssize)
{
unsigned long va;
unsigned int penc;
unsigned long sllp;
/* VPN_SHIFT can be atmost 12 */
va = vpn << VPN_SHIFT;
@ -113,7 +117,9 @@ static inline void __tlbiel(unsigned long vpn, int psize, int apsize, int ssize)
/* clear out bits after(52) [0....52.....63] */
va &= ~((1ul << (64 - 52)) - 1);
va |= ssize << 8;
va |= mmu_psize_defs[apsize].sllp << 6;
sllp = ((mmu_psize_defs[apsize].sllp & SLB_VSID_L) >> 6) |
((mmu_psize_defs[apsize].sllp & SLB_VSID_LP) >> 4);
va |= sllp << 5;
asm volatile(".long 0x7c000224 | (%0 << 11) | (0 << 21)"
: : "r"(va) : "memory");
break;
@ -554,6 +560,7 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
seg_off |= vpi << shift;
}
*vpn = vsid << (SID_SHIFT - VPN_SHIFT) | seg_off >> VPN_SHIFT;
break;
case MMU_SEGSIZE_1T:
/* We only have 40 - 23 bits of seg_off in avpn */
seg_off = (avpn & 0x1ffff) << 23;
@ -563,6 +570,7 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
seg_off |= vpi << shift;
}
*vpn = vsid << (SID_SHIFT_1T - VPN_SHIFT) | seg_off >> VPN_SHIFT;
break;
default:
*vpn = size = 0;
}

View File

@ -1252,8 +1252,11 @@ nocheck:
ret = 0;
out:
if (has_branch_stack(event))
if (has_branch_stack(event)) {
power_pmu_bhrb_enable(event);
cpuhw->bhrb_filter = ppmu->bhrb_filter_map(
event->attr.branch_sample_type);
}
perf_pmu_enable(event->pmu);
local_irq_restore(flags);

View File

@ -561,18 +561,13 @@ static int power8_generic_events[] = {
static u64 power8_bhrb_filter_map(u64 branch_sample_type)
{
u64 pmu_bhrb_filter = 0;
u64 br_privilege = branch_sample_type & ONLY_PLM;
/* BHRB and regular PMU events share the same prvillege state
/* BHRB and regular PMU events share the same privilege state
* filter configuration. BHRB is always recorded along with a
* regular PMU event. So privilege state filter criteria for BHRB
* and the companion PMU events has to be the same. As a default
* "perf record" tool sets all privillege bits ON when no filter
* criteria is provided in the command line. So as along as all
* privillege bits are ON or they are OFF, we are good to go.
* regular PMU event. As the privilege state filter is handled
* in the basic PMC configuration of the accompanying regular
* PMU event, we ignore any separate BHRB specific request.
*/
if ((br_privilege != 7) && (br_privilege != 0))
return -1;
/* No branch filter requested */
if (branch_sample_type & PERF_SAMPLE_BRANCH_ANY)
@ -621,10 +616,19 @@ static struct power_pmu power8_pmu = {
static int __init init_power8_pmu(void)
{
int rc;
if (!cur_cpu_spec->oprofile_cpu_type ||
strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power8"))
return -ENODEV;
return register_power_pmu(&power8_pmu);
rc = register_power_pmu(&power8_pmu);
if (rc)
return rc;
/* Tell userspace that EBB is supported */
cur_cpu_spec->cpu_user_features2 |= PPC_FEATURE2_EBB;
return 0;
}
early_initcall(init_power8_pmu);

View File

@ -114,7 +114,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
* the root bridge. So it's not reasonable to continue
* the probing.
*/
if (!dn || !edev)
if (!dn || !edev || edev->pe)
return 0;
/* Skip for PCI-ISA bridge */
@ -122,8 +122,19 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
return 0;
/* Initialize eeh device */
edev->class_code = dev->class;
edev->mode = 0;
edev->class_code = dev->class;
edev->mode &= 0xFFFFFF00;
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
edev->mode |= EEH_DEV_BRIDGE;
if (pci_is_pcie(dev)) {
edev->pcie_cap = pci_pcie_cap(dev);
if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
edev->mode |= EEH_DEV_ROOT_PORT;
else if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)
edev->mode |= EEH_DEV_DS_PORT;
}
edev->config_addr = ((dev->bus->number << 8) | dev->devfn);
edev->pe_config_addr = phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff);

View File

@ -1266,7 +1266,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
}
void pnv_pci_init_ioda2_phb(struct device_node *np)
void __init pnv_pci_init_ioda2_phb(struct device_node *np)
{
pnv_pci_init_ioda_phb(np, 0, PNV_PHB_IODA2);
}

Some files were not shown because too many files have changed in this diff Show More