csiostor:T5 Firmware fix and cleanup.

This patch fix is to use default firmware configuration files
present in the adapter incase if not available in standard
/lib/firmware/* dir. Additional cleanup is done to reuse flash
related defines from cxgb4 header file.

Please apply over net-next since it depends on previous commit.

Signed-off-by: Praveen Madhavan <praveenm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Praveen Madhavan 2015-01-27 19:46:37 +05:30 committed by David S. Miller
parent 5cce1cf718
commit 216ce69c7f
3 changed files with 128 additions and 257 deletions

View file

@ -636,7 +636,7 @@ csio_hw_print_fw_version(struct csio_hw *hw, char *str)
static int
csio_hw_get_fw_version(struct csio_hw *hw, uint32_t *vers)
{
return csio_hw_read_flash(hw, FW_IMG_START +
return csio_hw_read_flash(hw, FLASH_FW_START +
offsetof(struct fw_hdr, fw_ver), 1,
vers, 0);
}
@ -696,9 +696,9 @@ csio_hw_fw_dload(struct csio_hw *hw, uint8_t *fw_data, uint32_t size)
return -EINVAL;
}
if (size > FW_MAX_SIZE) {
if (size > FLASH_FW_MAX_SIZE) {
csio_err(hw, "FW image too large, max is %u bytes\n",
FW_MAX_SIZE);
FLASH_FW_MAX_SIZE);
return -EINVAL;
}
@ -714,10 +714,10 @@ csio_hw_fw_dload(struct csio_hw *hw, uint8_t *fw_data, uint32_t size)
i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */
csio_dbg(hw, "Erasing sectors... start:%d end:%d\n",
FW_START_SEC, FW_START_SEC + i - 1);
FLASH_FW_START_SEC, FLASH_FW_START_SEC + i - 1);
ret = csio_hw_flash_erase_sectors(hw, FW_START_SEC,
FW_START_SEC + i - 1);
ret = csio_hw_flash_erase_sectors(hw, FLASH_FW_START_SEC,
FLASH_FW_START_SEC + i - 1);
if (ret) {
csio_err(hw, "Flash Erase failed\n");
goto out;
@ -730,14 +730,14 @@ csio_hw_fw_dload(struct csio_hw *hw, uint8_t *fw_data, uint32_t size)
*/
memcpy(first_page, fw_data, SF_PAGE_SIZE);
((struct fw_hdr *)first_page)->fw_ver = htonl(0xffffffff);
ret = csio_hw_write_flash(hw, FW_IMG_START, SF_PAGE_SIZE, first_page);
ret = csio_hw_write_flash(hw, FLASH_FW_START, SF_PAGE_SIZE, first_page);
if (ret)
goto out;
csio_dbg(hw, "Writing Flash .. start:%d end:%d\n",
FW_IMG_START, FW_IMG_START + size);
addr = FW_IMG_START;
addr = FLASH_FW_START;
for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
addr += SF_PAGE_SIZE;
fw_data += SF_PAGE_SIZE;
@ -747,7 +747,7 @@ csio_hw_fw_dload(struct csio_hw *hw, uint8_t *fw_data, uint32_t size)
}
ret = csio_hw_write_flash(hw,
FW_IMG_START +
FLASH_FW_START +
offsetof(struct fw_hdr, fw_ver),
sizeof(hdr->fw_ver),
(const uint8_t *)&hdr->fw_ver);
@ -1250,116 +1250,6 @@ csio_hw_fw_upgrade(struct csio_hw *hw, uint32_t mbox,
return csio_hw_fw_restart(hw, mbox, reset);
}
/*
* csio_hw_fw_config_file - setup an adapter via a Configuration File
* @hw: the HW module
* @mbox: mailbox to use for the FW command
* @mtype: the memory type where the Configuration File is located
* @maddr: the memory address where the Configuration File is located
* @finiver: return value for CF [fini] version
* @finicsum: return value for CF [fini] checksum
* @cfcsum: return value for CF computed checksum
*
* Issue a command to get the firmware to process the Configuration
* File located at the specified mtype/maddress. If the Configuration
* File is processed successfully and return value pointers are
* provided, the Configuration File "[fini] section version and
* checksum values will be returned along with the computed checksum.
* It's up to the caller to decide how it wants to respond to the
* checksums not matching but it recommended that a prominant warning
* be emitted in order to help people rapidly identify changed or
* corrupted Configuration Files.
*
* Also note that it's possible to modify things like "niccaps",
* "toecaps",etc. between processing the Configuration File and telling
* the firmware to use the new configuration. Callers which want to
* do this will need to "hand-roll" their own CAPS_CONFIGS commands for
* Configuration Files if they want to do this.
*/
static int
csio_hw_fw_config_file(struct csio_hw *hw,
unsigned int mtype, unsigned int maddr,
uint32_t *finiver, uint32_t *finicsum, uint32_t *cfcsum)
{
struct csio_mb *mbp;
struct fw_caps_config_cmd *caps_cmd;
int rv = -EINVAL;
enum fw_retval ret;
mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
if (!mbp) {
CSIO_INC_STATS(hw, n_err_nomem);
return -ENOMEM;
}
/*
* Tell the firmware to process the indicated Configuration File.
* If there are no errors and the caller has provided return value
* pointers for the [fini] section version, checksum and computed
* checksum, pass those back to the caller.
*/
caps_cmd = (struct fw_caps_config_cmd *)(mbp->mb);
CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1);
caps_cmd->op_to_write =
htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
FW_CMD_REQUEST_F |
FW_CMD_READ_F);
caps_cmd->cfvalid_to_len16 =
htonl(FW_CAPS_CONFIG_CMD_CFVALID_F |
FW_CAPS_CONFIG_CMD_MEMTYPE_CF_V(mtype) |
FW_CAPS_CONFIG_CMD_MEMADDR64K_CF_V(maddr >> 16) |
FW_LEN16(*caps_cmd));
if (csio_mb_issue(hw, mbp)) {
csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD failed!\n");
goto out;
}
ret = csio_mb_fw_retval(mbp);
if (ret != FW_SUCCESS) {
csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv);
goto out;
}
if (finiver)
*finiver = ntohl(caps_cmd->finiver);
if (finicsum)
*finicsum = ntohl(caps_cmd->finicsum);
if (cfcsum)
*cfcsum = ntohl(caps_cmd->cfcsum);
/* Validate device capabilities */
if (csio_hw_validate_caps(hw, mbp)) {
rv = -ENOENT;
goto out;
}
/*
* And now tell the firmware to use the configuration we just loaded.
*/
caps_cmd->op_to_write =
htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
FW_CMD_REQUEST_F |
FW_CMD_WRITE_F);
caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd));
if (csio_mb_issue(hw, mbp)) {
csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD failed!\n");
goto out;
}
ret = csio_mb_fw_retval(mbp);
if (ret != FW_SUCCESS) {
csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv);
goto out;
}
rv = 0;
out:
mempool_free(mbp, hw->mb_mempool);
return rv;
}
/*
* csio_get_device_params - Get device parameters.
* @hw: HW module
@ -1762,11 +1652,13 @@ csio_hw_flash_config(struct csio_hw *hw, u32 *fw_cfg_param, char *path)
static int
csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param)
{
struct csio_mb *mbp = NULL;
struct fw_caps_config_cmd *caps_cmd;
unsigned int mtype, maddr;
int rv;
int rv = -EINVAL;
uint32_t finiver = 0, finicsum = 0, cfcsum = 0;
int using_flash;
char path[64];
char *config_name = NULL;
/*
* Reset device if necessary
@ -1786,51 +1678,106 @@ csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param)
rv = csio_hw_flash_config(hw, fw_cfg_param, path);
spin_lock_irq(&hw->lock);
if (rv != 0) {
if (rv == -ENOENT) {
/*
* config file was not found. Use default
* config file from flash.
*/
mtype = FW_MEMTYPE_CF_FLASH;
maddr = hw->chip_ops->chip_flash_cfg_addr(hw);
using_flash = 1;
} else {
/*
* we revert back to the hardwired config if
* flashing failed.
*/
goto bye;
}
/*
* config file was not found. Use default
* config file from flash.
*/
config_name = "On FLASH";
mtype = FW_MEMTYPE_CF_FLASH;
maddr = hw->chip_ops->chip_flash_cfg_addr(hw);
} else {
config_name = path;
mtype = FW_PARAMS_PARAM_Y_G(*fw_cfg_param);
maddr = FW_PARAMS_PARAM_Z_G(*fw_cfg_param) << 16;
using_flash = 0;
}
hw->cfg_store = (uint8_t)mtype;
mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
if (!mbp) {
CSIO_INC_STATS(hw, n_err_nomem);
return -ENOMEM;
}
/*
* Issue a Capability Configuration command to the firmware to get it
* to parse the Configuration File.
* Tell the firmware to process the indicated Configuration File.
* If there are no errors and the caller has provided return value
* pointers for the [fini] section version, checksum and computed
* checksum, pass those back to the caller.
*/
rv = csio_hw_fw_config_file(hw, mtype, maddr, &finiver,
&finicsum, &cfcsum);
if (rv != 0)
caps_cmd = (struct fw_caps_config_cmd *)(mbp->mb);
CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1);
caps_cmd->op_to_write =
htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
FW_CMD_REQUEST_F |
FW_CMD_READ_F);
caps_cmd->cfvalid_to_len16 =
htonl(FW_CAPS_CONFIG_CMD_CFVALID_F |
FW_CAPS_CONFIG_CMD_MEMTYPE_CF_V(mtype) |
FW_CAPS_CONFIG_CMD_MEMADDR64K_CF_V(maddr >> 16) |
FW_LEN16(*caps_cmd));
if (csio_mb_issue(hw, mbp)) {
rv = -EINVAL;
goto bye;
}
rv = csio_mb_fw_retval(mbp);
/* If the CAPS_CONFIG failed with an ENOENT (for a Firmware
* Configuration File in FLASH), our last gasp effort is to use the
* Firmware Configuration File which is embedded in the
* firmware. A very few early versions of the firmware didn't
* have one embedded but we can ignore those.
*/
if (rv == ENOENT) {
CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1);
caps_cmd->op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
FW_CMD_REQUEST_F |
FW_CMD_READ_F);
caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd));
if (csio_mb_issue(hw, mbp)) {
rv = -EINVAL;
goto bye;
}
rv = csio_mb_fw_retval(mbp);
config_name = "Firmware Default";
}
if (rv != FW_SUCCESS)
goto bye;
hw->cfg_finiver = finiver;
hw->cfg_finicsum = finicsum;
hw->cfg_cfcsum = cfcsum;
hw->cfg_csum_status = true;
finiver = ntohl(caps_cmd->finiver);
finicsum = ntohl(caps_cmd->finicsum);
cfcsum = ntohl(caps_cmd->cfcsum);
/*
* And now tell the firmware to use the configuration we just loaded.
*/
caps_cmd->op_to_write =
htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
FW_CMD_REQUEST_F |
FW_CMD_WRITE_F);
caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd));
if (csio_mb_issue(hw, mbp)) {
rv = -EINVAL;
goto bye;
}
rv = csio_mb_fw_retval(mbp);
if (rv != FW_SUCCESS) {
csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv);
goto bye;
}
mempool_free(mbp, hw->mb_mempool);
if (finicsum != cfcsum) {
csio_warn(hw,
"Config File checksum mismatch: csum=%#x, computed=%#x\n",
finicsum, cfcsum);
hw->cfg_csum_status = false;
}
/* Validate device capabilities */
if (csio_hw_validate_caps(hw, mbp))
goto bye;
/*
* Note that we're operating with parameters
* not supplied by the driver, rather than from hard-wired
@ -1853,55 +1800,19 @@ csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param)
/* Post event to notify completion of configuration */
csio_post_event(&hw->sm, CSIO_HWE_INIT);
csio_info(hw,
"Firmware Configuration File %s, version %#x, computed checksum %#x\n",
(using_flash ? "in device FLASH" : path), finiver, cfcsum);
csio_info(hw, "Successfully configure using Firmware "
"Configuration File %s, version %#x, computed checksum %#x\n",
config_name, finiver, cfcsum);
return 0;
/*
* Something bad happened. Return the error ...
*/
bye:
if (mbp)
mempool_free(mbp, hw->mb_mempool);
hw->flags &= ~CSIO_HWF_USING_SOFT_PARAMS;
csio_dbg(hw, "Configuration file error %d\n", rv);
return rv;
}
/*
* Attempt to initialize the adapter via hard-coded, driver supplied
* parameters ...
*/
static int
csio_hw_no_fwconfig(struct csio_hw *hw, int reset)
{
int rv;
/*
* Reset device if necessary
*/
if (reset) {
rv = csio_do_reset(hw, true);
if (rv != 0)
goto out;
}
/* Get and set device capabilities */
rv = csio_config_device_caps(hw);
if (rv != 0)
goto out;
/* device parameters */
rv = csio_get_device_params(hw);
if (rv != 0)
goto out;
/* Configure SGE */
csio_wr_sge_init(hw);
/* Post event to notify completion of configuration */
csio_post_event(&hw->sm, CSIO_HWE_INIT);
out:
csio_warn(hw, "Configuration file error %d\n", rv);
return rv;
}
@ -2101,7 +2012,9 @@ csio_hw_flash_fw(struct csio_hw *hw, int *reset)
if (request_firmware(&fw, FW_FNAME_T5, dev) < 0) {
csio_err(hw, "could not find firmware image %s, err: %d\n",
FW_FNAME_T5, ret);
return -EINVAL;
} else {
fw_data = fw->data;
fw_size = fw->size;
}
/* allocate memory to read the header of the firmware on the
@ -2109,9 +2022,6 @@ csio_hw_flash_fw(struct csio_hw *hw, int *reset)
*/
card_fw = kmalloc(sizeof(*card_fw), GFP_KERNEL);
fw_data = fw->data;
fw_size = fw->size;
/* upgrade FW logic */
ret = csio_hw_prep_fw(hw, fw_info, fw_data, fw_size, card_fw,
hw->fw_state, reset);
@ -2190,31 +2100,31 @@ csio_hw_configure(struct csio_hw *hw)
if (rv != 0)
goto out;
/*
* If the firmware doesn't support Configuration
* Files, use the old Driver-based, hard-wired
* initialization. Otherwise, try using the
* Configuration File support and fall back to the
* Driver-based initialization if there's no
* Configuration File found.
/* If the firmware doesn't support Configuration Files,
* return an error.
*/
if (csio_hw_check_fwconfig(hw, param) == 0) {
rv = csio_hw_use_fwconfig(hw, reset, param);
if (rv == -ENOENT)
goto out;
if (rv != 0) {
csio_info(hw,
"No Configuration File present "
"on adapter. Using hard-wired "
"configuration parameters.\n");
rv = csio_hw_no_fwconfig(hw, reset);
}
} else {
rv = csio_hw_no_fwconfig(hw, reset);
rv = csio_hw_check_fwconfig(hw, param);
if (rv != 0) {
csio_info(hw, "Firmware doesn't support "
"Firmware Configuration files\n");
goto out;
}
if (rv != 0)
/* The firmware provides us with a memory buffer where we can
* load a Configuration File from the host if we want to
* override the Configuration File in flash.
*/
rv = csio_hw_use_fwconfig(hw, reset, param);
if (rv == -ENOENT) {
csio_info(hw, "Could not initialize "
"adapter, error%d\n", rv);
goto out;
}
if (rv != 0) {
csio_info(hw, "Could not initialize "
"adapter, error%d\n", rv);
goto out;
}
} else {
if (hw->fw_state == CSIO_DEV_STATE_INIT) {

View file

@ -48,6 +48,7 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_transport_fc.h>
#include "t4_hw.h"
#include "csio_hw_chip.h"
#include "csio_wr.h"
#include "csio_mb.h"
@ -174,16 +175,12 @@ struct csio_evt_msg {
};
enum {
EEPROMVSIZE = 32768, /* Serial EEPROM virtual address space size */
SERNUM_LEN = 16, /* Serial # length */
EC_LEN = 16, /* E/C length */
ID_LEN = 16, /* ID length */
TRACE_LEN = 112, /* length of trace data and mask */
};
enum {
SF_PAGE_SIZE = 256, /* serial flash page size */
SF_SEC_SIZE = 64 * 1024, /* serial flash sector size */
SF_SIZE = SF_SEC_SIZE * 16, /* serial flash size */
};
@ -199,38 +196,8 @@ enum {
SF_RD_DATA_FAST = 0xb, /* read flash */
SF_RD_ID = 0x9f, /* read ID */
SF_ERASE_SECTOR = 0xd8, /* erase sector */
FW_START_SEC = 8, /* first flash sector for FW */
FW_IMG_START = FW_START_SEC * SF_SEC_SIZE,
FW_MAX_SIZE = 16 * SF_SEC_SIZE,
FLASH_CFG_MAX_SIZE = 0x10000 , /* max size of the flash config file*/
FLASH_CFG_OFFSET = 0x1f0000,
FLASH_CFG_START_SEC = FLASH_CFG_OFFSET / SF_SEC_SIZE,
};
/*
* Flash layout.
*/
#define FLASH_START(start) ((start) * SF_SEC_SIZE)
#define FLASH_MAX_SIZE(nsecs) ((nsecs) * SF_SEC_SIZE)
enum {
/*
* Location of firmware image in FLASH.
*/
FLASH_FW_START_SEC = 8,
FLASH_FW_NSECS = 16,
FLASH_FW_START = FLASH_START(FLASH_FW_START_SEC),
FLASH_FW_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FW_NSECS),
/* Location of Firmware Configuration File in FLASH. */
FLASH_CFG_START = FLASH_START(FLASH_CFG_START_SEC),
};
#undef FLASH_START
#undef FLASH_MAX_SIZE
/* Management module */
enum {
CSIO_MGMT_EQ_WRSIZE = 512,
@ -481,11 +448,6 @@ struct csio_hw {
uint32_t tp_vers;
char chip_ver;
uint16_t chip_id; /* Tells T4/T5 chip */
uint32_t cfg_finiver;
uint32_t cfg_finicsum;
uint32_t cfg_cfcsum;
uint8_t cfg_csum_status;
uint8_t cfg_store;
enum csio_dev_state fw_state;
struct csio_vpd vpd;

View file

@ -95,7 +95,6 @@ enum { MEM_EDC0, MEM_EDC1, MEM_MC, MEM_MC0 = MEM_MC, MEM_MC1 };
enum {
MEMWIN_APERTURE = 2048,
MEMWIN_BASE = 0x1b800,
MEMWIN_CSIOSTOR = 6, /* PCI-e Memory Window access */
};
/* Slow path handlers */