mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-14 20:46:39 +00:00
ASoC: davinci-mcbsp: add binding for McBSP
Add devicetree binding for the TI DA850/OMAP-L138/AM18xx MultiChannel Buffered Serial Port (McBSP) The optional register range "dat" is not implemented at the moment. The current driver supports only DMA into RX/TX registers but no FIFO. Once the FIFO is implemented in the driver the "dat" range will be used. Signed-off-by: Petr Kulhavy <petr@barix.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
f55532a0c0
commit
22225835e2
1 changed files with 51 additions and 0 deletions
51
Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
Normal file
51
Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
Normal file
|
@ -0,0 +1,51 @@
|
|||
Texas Instruments DaVinci McBSP module
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
This binding describes the "Multi-channel Buffered Serial Port" (McBSP)
|
||||
audio interface found in some TI DaVinci processors like the OMAP-L138 or AM180x.
|
||||
|
||||
|
||||
Required properties:
|
||||
~~~~~~~~~~~~~~~~~~~~
|
||||
- compatible :
|
||||
"ti,da850-mcbsp" : for DA850, AM180x and OPAM-L138 platforms
|
||||
|
||||
- reg : physical base address and length of the controller memory mapped
|
||||
region(s).
|
||||
- reg-names : Should contain:
|
||||
* "mpu" for the main registers (required).
|
||||
* "dat" for the data FIFO (optional).
|
||||
|
||||
- dmas: three element list of DMA controller phandles, DMA request line and
|
||||
TC channel ordered triplets.
|
||||
- dma-names: identifier string for each DMA request line in the dmas property.
|
||||
These strings correspond 1:1 with the ordered pairs in dmas. The dma
|
||||
identifiers must be "rx" and "tx".
|
||||
|
||||
Optional properties:
|
||||
~~~~~~~~~~~~~~~~~~~~
|
||||
- interrupts : Interrupt numbers for McBSP
|
||||
- interrupt-names : Known interrupt names are "rx" and "tx"
|
||||
|
||||
- pinctrl-0: Should specify pin control group used for this controller.
|
||||
- pinctrl-names: Should contain only one value - "default", for more details
|
||||
please refer to pinctrl-bindings.txt
|
||||
|
||||
Example (AM1808):
|
||||
~~~~~~~~~~~~~~~~~
|
||||
|
||||
mcbsp0: mcbsp@1d10000 {
|
||||
compatible = "ti,da850-mcbsp";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcbsp0_pins>;
|
||||
|
||||
reg = <0x00110000 0x1000>,
|
||||
<0x00310000 0x1000>;
|
||||
reg-names = "mpu", "dat";
|
||||
interrupts = <97 98>;
|
||||
interrupts-names = "rx", "tx";
|
||||
dmas = <&edma0 3 1
|
||||
&edma0 2 1>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "okay";
|
||||
};
|
Loading…
Reference in a new issue