hwmon: (lm90) Add max6654 support to lm90 driver
Add support for the Maxim MAX6654 to the lm90 driver. The MAX6654 is a temperature sensor, similar to the others, but with some differences regarding the configuration register, and the sampling rate at which extended resolution becomes possible. Signed-off-by: Josh Lehan <krellan@google.com> Link: https://lore.kernel.org/r/20200513184248.145765-1-krellan@google.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Josh Lehan
Guenter Roeck
parent
036855a4c3
commit
229d495d81
|
|
@ -123,6 +123,18 @@ Supported chips:
|
|||
|
||||
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
|
||||
|
||||
* Maxim MAX6654
|
||||
|
||||
Prefix: 'max6654'
|
||||
|
||||
Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
|
||||
|
||||
0x4c, 0x4d and 0x4e
|
||||
|
||||
Datasheet: Publicly available at the Maxim website
|
||||
|
||||
https://www.maximintegrated.com/en/products/sensors/MAX6654.html
|
||||
|
||||
* Maxim MAX6657
|
||||
|
||||
Prefix: 'max6657'
|
||||
|
|
@ -301,6 +313,13 @@ ADT7461, ADT7461A, NCT1008:
|
|||
* Extended temperature range (breaks compatibility)
|
||||
* Lower resolution for remote temperature
|
||||
|
||||
MAX6654:
|
||||
* Better local resolution
|
||||
* Selectable address
|
||||
* Remote sensor type selection
|
||||
* Extended temperature range
|
||||
* Extended resolution only available when conversion rate <= 1 Hz
|
||||
|
||||
MAX6657 and MAX6658:
|
||||
* Better local resolution
|
||||
* Remote sensor type selection
|
||||
|
|
@ -336,8 +355,8 @@ SA56004X:
|
|||
|
||||
All temperature values are given in degrees Celsius. Resolution
|
||||
is 1.0 degree for the local temperature, 0.125 degree for the remote
|
||||
temperature, except for the MAX6657, MAX6658 and MAX6659 which have a
|
||||
resolution of 0.125 degree for both temperatures.
|
||||
temperature, except for the MAX6654, MAX6657, MAX6658 and MAX6659 which have
|
||||
a resolution of 0.125 degree for both temperatures.
|
||||
|
||||
Each sensor has its own high and low limits, plus a critical limit.
|
||||
Additionally, there is a relative hysteresis value common to both critical
|
||||
|
|
|
|||
|
|
@ -1198,10 +1198,11 @@ config SENSORS_LM90
|
|||
help
|
||||
If you say yes here you get support for National Semiconductor LM90,
|
||||
LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
|
||||
Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
|
||||
MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
|
||||
Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, GMT G781, and
|
||||
Texas Instruments TMP451 sensor chips.
|
||||
Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, MAX6657, MAX6658,
|
||||
MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, MAX6696,
|
||||
ON Semiconductor NCT1008, Winbond/Nuvoton W83L771W/G/AWG/ASG,
|
||||
Philips SA56004, GMT G781, and Texas Instruments TMP451
|
||||
sensor chips.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called lm90.
|
||||
|
|
|
|||
|
|
@ -35,6 +35,14 @@
|
|||
* explicitly as max6659, or if its address is not 0x4c.
|
||||
* These chips lack the remote temperature offset feature.
|
||||
*
|
||||
* This driver also supports the MAX6654 chip made by Maxim. This chip can
|
||||
* be at 9 different addresses, similar to MAX6680/MAX6681. The MAX6654 is
|
||||
* otherwise similar to MAX6657/MAX6658/MAX6659. Extended range is available
|
||||
* by setting the configuration register accordingly, and is done during
|
||||
* initialization. Extended precision is only available at conversion rates
|
||||
* of 1 Hz and slower. Note that extended precision is not enabled by
|
||||
* default, as this driver initializes all chips to 2 Hz by design.
|
||||
*
|
||||
* This driver also supports the MAX6646, MAX6647, MAX6648, MAX6649 and
|
||||
* MAX6692 chips made by Maxim. These are again similar to the LM86,
|
||||
* but they use unsigned temperature values and can report temperatures
|
||||
|
|
@ -94,8 +102,8 @@
|
|||
* have address 0x4d.
|
||||
* MAX6647 has address 0x4e.
|
||||
* MAX6659 can have address 0x4c, 0x4d or 0x4e.
|
||||
* MAX6680 and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
|
||||
* 0x4c, 0x4d or 0x4e.
|
||||
* MAX6654, MAX6680, and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29,
|
||||
* 0x2a, 0x2b, 0x4c, 0x4d or 0x4e.
|
||||
* SA56004 can have address 0x48 through 0x4F.
|
||||
*/
|
||||
|
||||
|
|
@ -104,7 +112,7 @@ static const unsigned short normal_i2c[] = {
|
|||
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
|
||||
|
||||
enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
|
||||
max6646, w83l771, max6696, sa56004, g781, tmp451 };
|
||||
max6646, w83l771, max6696, sa56004, g781, tmp451, max6654 };
|
||||
|
||||
/*
|
||||
* The LM90 registers
|
||||
|
|
@ -145,7 +153,7 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
|
|||
#define LM90_REG_R_TCRIT_HYST 0x21
|
||||
#define LM90_REG_W_TCRIT_HYST 0x21
|
||||
|
||||
/* MAX6646/6647/6649/6657/6658/6659/6695/6696 registers */
|
||||
/* MAX6646/6647/6649/6654/6657/6658/6659/6695/6696 registers */
|
||||
|
||||
#define MAX6657_REG_R_LOCAL_TEMPL 0x11
|
||||
#define MAX6696_REG_R_STATUS2 0x12
|
||||
|
|
@ -209,6 +217,7 @@ static const struct i2c_device_id lm90_id[] = {
|
|||
{ "max6646", max6646 },
|
||||
{ "max6647", max6646 },
|
||||
{ "max6649", max6646 },
|
||||
{ "max6654", max6654 },
|
||||
{ "max6657", max6657 },
|
||||
{ "max6658", max6657 },
|
||||
{ "max6659", max6659 },
|
||||
|
|
@ -269,6 +278,10 @@ static const struct of_device_id __maybe_unused lm90_of_match[] = {
|
|||
.compatible = "dallas,max6649",
|
||||
.data = (void *)max6646
|
||||
},
|
||||
{
|
||||
.compatible = "dallas,max6654",
|
||||
.data = (void *)max6654
|
||||
},
|
||||
{
|
||||
.compatible = "dallas,max6657",
|
||||
.data = (void *)max6657
|
||||
|
|
@ -367,6 +380,11 @@ static const struct lm90_params lm90_params[] = {
|
|||
.max_convrate = 6,
|
||||
.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
|
||||
},
|
||||
[max6654] = {
|
||||
.alert_alarms = 0x7c,
|
||||
.max_convrate = 7,
|
||||
.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
|
||||
},
|
||||
[max6657] = {
|
||||
.flags = LM90_PAUSE_FOR_CONFIG,
|
||||
.alert_alarms = 0x7c,
|
||||
|
|
@ -1557,6 +1575,16 @@ static int lm90_detect(struct i2c_client *client,
|
|||
&& (config1 & 0x3f) == 0x00
|
||||
&& convrate <= 0x07) {
|
||||
name = "max6646";
|
||||
} else
|
||||
/*
|
||||
* The chip_id of the MAX6654 holds the revision of the chip.
|
||||
* The lowest 3 bits of the config1 register are unused and
|
||||
* should return zero when read.
|
||||
*/
|
||||
if (chip_id == 0x08
|
||||
&& (config1 & 0x07) == 0x00
|
||||
&& convrate <= 0x07) {
|
||||
name = "max6654";
|
||||
}
|
||||
} else
|
||||
if (address == 0x4C
|
||||
|
|
@ -1660,6 +1688,15 @@ static int lm90_init_client(struct i2c_client *client, struct lm90_data *data)
|
|||
if (data->kind == max6680)
|
||||
config |= 0x18;
|
||||
|
||||
/*
|
||||
* Put MAX6654 into extended range (0x20, extend minimum range from
|
||||
* 0 degrees to -64 degrees). Note that extended resolution is not
|
||||
* possible on the MAX6654 unless conversion rate is set to 1 Hz or
|
||||
* slower, which is intentionally not done by default.
|
||||
*/
|
||||
if (data->kind == max6654)
|
||||
config |= 0x20;
|
||||
|
||||
/*
|
||||
* Select external channel 0 for max6695/96
|
||||
*/
|
||||
|
|
|
|||
Loading…
Reference in New Issue